12 best cars subwoofers

• Loaded Sub Enclosure Features: Final Impedance: 2 Ohm. Peak Power Handling: 1600 Watts. CEA-2031 Compliant RMS Power Handling: 400 Watts. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents.
• Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 0.80 Cu Ft per sub. Vent dimensions: 2.5" x 6.75" x 9.75".
• Tuning frequency of enclosure: 37 Hz. 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire.
• Amplifier Features: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote.
• CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.).
• - 2 Ohm: 350 Watts x 1 Channel <1% THD+N. - 4 Ohm: 220 Watts x 1 Channel <1% THD+N. Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song).
• - 2 Ohm: 1400 Watts x 1 Channel. - 4 Ohm: 880 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.

User questions & answers

Question:	Can I connect this amp to a stock radio
Answer:	Yes
Question:	Does the 12" with amp come with a bass knob
Answer:	Yes it’s included in the package
Question:	What is the amp wattage
Answer:	The lower the ohms the more power flows so say it said 1400 at 2 ohms then at 4oms its 700 or lower with 8ohms
Question:	does this hook to car radio? and how
Answer:	Yes, through RCA cords from the back of your car stereo to the amp.

Product features

Rockville DK58 PACKAGE Dual 8" 1600w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

Includes:

• Amplifier
• Bass Remote
• Birth sheet with tested power
• Owner’s manual
• Mounting Screws

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

JBL BassPro SL 8-inch under seat subwoofer enclosure speaker amplifier. Soft start turn-on, speaker-level (high-level) inputs with Audio Sense Auto-on.

• 8-inch JBL BassPro SL powered under-seat compact subwoofer enclosure
• Power output: Peak: 250 watts RMS: 125 watts
• Efficient Class D amplifier
• Soft start turn-on, speaker-level (high-level) inputs with Audio Sense Auto-on
• Optional wired bass remote controller

User questions & answers

Question:	Que tan potente es
Answer:	I have two 12" MTX's and one Pioneer hooked up to an 1800 watt amp with only 1 ohm and it works just fine and pushes great. Haven't had any problems with blowing fuses or the subs. I don't think you'd have an issue.
Question:	Does it put out a lot of bass does it thump hard
Answer:	According to MTX 5.44 is the depth required so you should be alright
Question:	Will this integrate well with toyota jbl system
Answer:	Yea mine was a replacement also for a box. Fits perfect.
Question:	Can you buy a bass remote for this
Answer:	Mounting Depth is 4.86"

Product description

800 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass Enclosure

• 5/8" MDF Construction
• Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
• Embroidered Terminator Logo; Impedance: 2Ω
• Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
• Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
• Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
• Ruggedly constructed using 5/8" MDF and aviation grade black carpet

User questions & answers

Question:	Could I pus these on a monoblock amp? Or would I have to bridge them myself
Answer:	Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1.
Question:	Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard
Answer:	I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp
Question:	anybody had these subs for awhile do they last
Answer:	I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day
Question:	Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal
Answer:	Everything you see, you get...no speaker wires though...

Product features

MTX TNE212D Dual 12-Inch Sealed Enclosure 2 Ohm

TNE212D Highlights

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

• High-flow, low-noise port design.
• Constructed with 5/8-Inch MDF
• 11 AWG input terminals
• Dimensions: (inches)13.5" x 27.375" x 5.25" (bottom) x 3.25" (top)

User questions & answers

Question:	Will it fit behind the seat of a 2014 f
Answer:	I would think it would. We had it behind the seat of an 87 gmc truck.
Question:	Does anyone know if this will fit behind a reg cab 2nd gen tacoma
Answer:	No. I have a 2nd gen Tacoma and a full size GMC. It will fit in the GMC but not in the Tacoma.
Question:	What's the ohm rating
Answer:	Its a 4 ohm dvc wired inside to give you a 2 ohm load. Hope this helps, if not I will be glad to answer more questions if needed.
Question:	What wiring kit should I buy for this
Answer:	We went with a 4 Gauge wire kit like this: http://www.amazon.com/Rockford-Fosgate-RFK4X-Complete-Amplifier/dp/B0012BYOSK/ref=sr_1_5?ie=UTF8&qid=1390091839&sr=8-5&keywords=Complete+4+Gauge+Amplifier+Installation+Kit . We also added a 1.0 Farad Capacitor which is probably considered old school by today's installation practices, but it works and the punch from the Sub does not cause dimming of the lights and doesn't get hot. It was a great match up and now for over 6 months has performed very well. We also used a 600 Watt Sony Mono Amplifier as it match the spec's for the sub. Mind you, we don't push the sub hard like others may do... This sub and enclosure combo isn't made to do that, but it does give a pretty decent punch when demanded by the music being played. If you want a lot of punch then consider a different sub enclosure

Product features

Rockford Fosgate R2S-1X12 R2 Shallow Prime Single 12-Inch Subwoofer Enclosure

Description:

When you have no space for bass, our PRIME R2S 12" shallow loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel.

• Constructed with 5/8" MDF
• Covered with high density carpet
• High current binding posts

Product description

Skar Audio introduces the SDR-2X12D4 Dual 12-inch loaded Vented subwoofer enclosure to cater to the audiophile who wants a competition grade system in their Vehicle without all of the headache involved with designing it from the ground up. This loaded enclosure features two of our extremely popular SDR-12 D4 1, 200 Watt Max power subwoofers which combined come in at 2, 400 watts Max power for the pair. The subwoofers come pre-loaded and wired up inside of this custom dual 12" Ported enclosure, which features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This enclosure was engineered by Skar Audio specifically for the subwoofers that are loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying subwoofers to ensure that the subwoofers and enclosure are an ideal match, or you will lose sound quality and output. With this loaded Subwoofer Enclosure model, All of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle. The dual 4 ohm subwoofers are wired up inside of the enclosure so that the final Impedance Load is configured for 1-ohm at the terminals (one terminal cup). peak power: 2, 400 watts, RMS power: 1, 200 watts. Enclosure Dimensions: Width: 37.875", Depth #1: 18.75" (Bottom depth), depth #2: 16.75" (Top depth), height: 14.25"

• SDR Series 12-inch Dual 4-ohm loaded Subwoofer Enclosure
• Peak Power: 2,400 Watts | RMS power: 1,200 Watts
• Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
• Custom Vented Enclosure Made of High Strength 5/8" MDF and Finished in Premium Black Carpeting
• Double Front Baffle (1.25") with Countersunk subwoofer design for Flush and Attractive Appearance
• Ported Enclosure Tuned at 32 Hz for Deep and Accurate Bass

User questions & answers

Question:	Will this fit in a 17 Chevy premier pushed to the back of the seats
Answer:	Hello. There is no mute setting. In the battery compartment there is a setting for how many beeps you would like when the alarm goes off (3-60) and a setting for how loud you want the beeps (low to high).
Question:	Will these fit in a 2008 dodge avenger
Answer:	There is a setting in the battery compartment for low to high. The highest setting is loud, so I would recommend it as a kitchen timer.
Question:	Would these fit in a 2017 honda civic ex-l
Answer:	First you can rotate clockwise,then zore counterclockwise to turn ring off.
Question:	Do these move lots of air
Answer:	This is very quiet. This is the most satisfying timer I have ever bought. I bought it for my eight-year-old son. He likes it very much. Because there is no noise to distract him

Product features

Product Specifications

• Includes Subwoofers Pre-Loaded Into Subwoofer Enclosure
• Skar Audio SDR-12 D4 - 12" Dual 4 Ohm Subwoofers
• Peak Power: 2,400 Watts (pair) | 1,200 Watts (each)
• RMS Power: 1,200 Watts (pair) | 600 Watts (each)
• Frequency Response: 32 - 300 Hz
• 2.5" High Temperature Copper Voice Coil

Product description

Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.

• Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
• 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
• Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

User questions & answers

Question:	Does this come with everything needed for installation
Answer:	Yes
Question:	does anyone know if it will fit under the seat in an 81 gmc k
Answer:	It should. The box is not too big. It fits in my 2002 Mercedes c240.
Question:	What are the true measurements of this thing? Can someone get out there with a tape measure because owners are reporting different numbers? Thanks
Answer:	No
Question:	Can i hook this up on a harley Davidson
Answer:	It is not ported...it's a sealed unit.

Product features

Rockville RW10CA 10 inch 800 Watt Slim Low Profile Active Powered Car Subwoofer

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant.

Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder. If you are not happy with any Rockville product we will take it back within 30 days of when you receive it and refund you. We know our our products will satisfy you.

The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7 inch thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.

Product description

Keep the bass bumping in your ride with the Kicker 10-Inch Thin Profile Subwoofer Enclosure. Its thin design allows it to fit perfectly behind or under your seat. This quality enclosure is built with heavy MDF construction and thick black carpet for durability. The 10-inch enclosure works best with 600 watts of power, and recommended for use with rap or music with rumble bass. It features 4-ohm impedance and 93.8 dB of sensitivity. Get more out of your music and ride in style with the Kicker subwoofer enclosure.

• Kicker 10-Inch 600 watt vented thin profile subwoofer enclosure
• RMS power: 300 watts
• Max power: 600 watts
• Impedance: 4 ohm
• Thin profile fits perfectly under or behind a seat

User questions & answers

Question:	Anyone run a different sub in this box? Blew mine just woundering if you could and what’s the max depth you ran
Answer:	Yes
Question:	What is the difference between the kicker comp and the comp
Answer:	The comp two has dual voice coils for a flexible design and a higher quality sound. They both sound Awsome the company 2 you can hear the highs a little more.
Question:	Will this fit in a 2015 Silverado double cab
Answer:	This speaker fits easily under the back seat of any truck
Question:	Box dimensions
Answer:	The box is 21 5/8" wide, 7 5/8" at the deepest point, and 15" high. The tapered end depth is 4 1/8"

• This ultra-thin subwoofer is designed to be placed at the bottom of the car seat, bringing you a more wonderful journey experience.
• Tuned by a senior sound engineer, it has strong and elastic low frequency, which makes every note vibrate in your ear.
• The two-in-one configuration of the power amplifier and the loudspeaker makes the installation in one step and saves the space inside the car. It has an ultra-thin thickness of 2.7 inches and can be installed under most car seats.
• We provide you with high-quality super-long cables and control wires, so you don't need to buy other accessories.
• Our products have been tested strictly and have reliable quality.

User questions & answers

Question:	Does this need to be wired directly to the car battery or can you use 12v inside car
Answer:	This definitely needs to have the main power wired directly to the positive battery terminal using heavy (at least 10 AWG) wire, with a fuse of around 30-40 amps as close to the battery as possible (within 12 inches) to protect the power wire in case of accidental contact with ground. The negative also needs to be heavy gauge wire with but can go to the nearest good chassis ground (I used a seat bolt with the paint sanded down to bare metal. Mine came with a suitable length of positive and ground cable, an AGU style fuse holder with a fuse for under the hood, and all necessary wire terminals.
Question:	Can you use two of these together
Answer:	I'm sure you could if you can split the bass signal from head unit. Would also have to run dual power lines or upgrade to larger gage then use a distribution block.
Question:	Is amp d class, how many watts RMS
Answer:	10in sub that's powered by a class D for 99 bucks. you'd probably demand the rms to be CEA-rated&compliant, too! I LIKE YOUR STYLE.
Question:	Does this come with the connector for the high level inputs? I don’t see it in any of the picture, just curious. Thank you
Answer:	hi ,you can see it in the last picture.

Product description

The **Rockford Fosgate R1S4 12** 12" Prime Series 300 Watt 4 Ohm SVC Subwoofer uses an anodized aluminum voice coil former that provides superior heat dissipation (up to 100° at max power levels). It has the capacity to handle power under continuous demand, conforming to CEA 2031 industry standards. The R1S4 12 also features: a parabolic polypropylene cone, 12 gauge compression terminals, a single voice coil design, and a stamped basket. This sub is best suited for standard sealed enclosures. Receive superior Rockford Fosgate quality with the Rockford Fosgate R1S4 12 Prime Series Subwoofer! TW12 SINGLE This Q Power TW12 Single Single 12" Sealed Car Audio Subwoofer Box Enclosures feature solid 5/8" MDF construction, charcoal carpet covering, terminal cup connectors, 0.9 cubic feet of air space per Box, and a mounting depth of 5.5 inches. Turn your ride into a sound machine with the help of the QPOWER QTW12 **Single 12"** Sealed Car Audio Subwoofer Sub Box Enclosure! The **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts! This Class A/B amplifier features a MOSFET power supply, an impedance of 2 ohms, a line output, low pass crossover, and an illuminated Boss logo. Soundstorm 8 Gauge Ga Car Amplifier Amp Complete Kit Wiring Installation+RCA

• Rockford Fosgate R1S4 12 12" Prime Series 300 Watt 4 Ohm SVC Subwoofer
• Power Handling (Max): 300 Watts
• Power Handling (RMS): 150 Watts
• **Features:**
• 12 gauge compression terminals

User questions & answers

Question:	What are the dimensions of the box/sub enclosure
Answer:	I do not remember the sizes sorry
Question:	What are the dimensions of the box
Answer:	O
Question:	Will this fit in the trunk of a g35 coupe
Answer:	With right measurement you should make it work.
Question:	I received the subwoofer will i receive my box and amp
Answer:	Brandon you should, I got mine all in one day was pretty sweet now I have not installed it yet but you should be getting everything in the picture now they did come in separate boxes though. The sub box was in it own box the subwoofer was in its own box and the amp& hardware was in another. Hope this helps .

Product description

Dual 12 Inch 2400 Watt Car Audio Subwoofer Enclosure 2 Ohm - The Seismic Audio Series of Car Audio Subwoofer Enclosures are built to give you the deep, chest-thumping, low-end bass you desire in your car audio system. Get rid of your stock-knock and prepare for hard-hitting bass, maximum bass response, punch, and additional sub-bass kick. The Seismic Audio car audio subwoofer enclosures are the last subs you will need. This dual 12 Inch subwoofer enclosure has a max output of 2400 watts, and rear bass vent to supply that super low-end bass. High-Quality Construction and a smooth carpet finish allow this box to fit in with your existing system or replace your old one. With our series of Car Audio Subwoofers, you will turn heads, people will hear you coming and you may even break noise-ordinance rules

• Model: OutRage122 | Dual 12 Inch 2400 Watt Car Audio Subwoofer Box
• Rear Vented Design for Maximum Bass Output | Power Rating: 2 x 1200 Watts Max Power | 2400 Watts Total
• High Powered 12 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
• Voice Coil: 2.5 inch 4 Layer Dual Voice Coil each woofer | Impedance: 2 Ohms | Magnet: 2 x 50 Ounce each woofer
• Sensitivity: 91 dB | Frequency Response: 25-150Hz | Binding Post Connectors | Dimensions: 32.3" x 15" x 13.8" | Weight: 50.7 lbs

Product description

Powerful subwoofers are the backbone of any serious car audio setup, which is why serious audiophiles turn to the Kicker CompC 10 Inch 500 Watt 4 Ohm DVC Subwoofer when they want awesome sound. This sub has a mounting depth of 4.81 inches and a mounting diameter of 9.125 inches. Intended for sealed boxes with between 1.0 and 2.4 cubic feet of volume, or in vented boxes with 1.25 to 1.75 cubic feet of volume, this sub's 250 watts of RMS power and 4 ohms of impedance are sure to give your vehicle the powerful, rich sound you're after. This sub also features an injection molded polypropylene cone, high temperature voice coil plus perimeter venting for heat management, ribbed polyurethane surround, and spring loaded speaker terminals.

User questions & answers

Question:	Could i use a 1000.2 planet audio amp for 2 of these
Answer:	No RCA is pre-amp outputs, you need to use the subwoofer output on your amp. If you want to connect your RCAs you need a powered subwoofer that has an included amp
Question:	do these come with any kind of speaker grill
Answer:	I’m not sure, it’s possible it’s not that big I have it in an Infiniti m35 trunk and still have room
Question:	How much airspace is required for a sealed box
Answer:	You can power this with a home amplifier. However, might be cheaper/easier to purchase a powered home subwoofer.
Question:	What is the mounting depth
Answer:	Sure, I have a pioneer 1000w driving mine.