11 best graphic equalizer homes
A "graphic equalizer" in the context of car audio and home audio systems is a device used to adjust and fine-tune the frequency response of an audio signal. It allows users to control the relative levels of different frequency bands, often represented as sliders on a graphical display, hence the name "graphic equalizer." Here are some key points about graphic equalizers in homes and car audio systems:
Frequency Bands: A graphic equalizer typically divides the audio spectrum into multiple frequency bands. Each band is associated with a slider that can be adjusted to boost or cut the level of that specific frequency range. Common frequency bands include bass (low frequencies), midrange, and treble (high frequencies).
Equalization: The primary purpose of a graphic equalizer is to perform equalization, which involves altering the balance of frequencies in an audio signal. This allows users to customize the sound to their preferences or to compensate for acoustic characteristics of the listening environment.
Home Audio Systems: In home audio systems, graphic equalizers are often integrated into receivers, amplifiers, or standalone components.They are used to adjust the audio output from sources such as CD players, turntables, or streaming devices to match the acoustics of the room or personal listening preferences.
Car Audio Systems: In car audio systems, graphic equalizers are commonly found in car stereos and head units. They serve a similar purpose as home audio equalizers but are designed to enhance the audio experience within the confines of a vehicle. Car audio enthusiasts use graphic equalizers to optimize the sound for their specific car's interior.
Controls: Graphic equalizers typically have a series of sliders or knobs that correspond to different frequency bands. By moving these sliders up or down, users can boost or attenuate specific frequencies. Some modern equalizers may also include presets for common audio settings or automatic equalization features that analyze the audio environment and make adjustments accordingly.
Sound Quality: Properly configured graphic equalizers can improve the overall sound quality of audio systems by reducing resonances, enhancing clarity, and addressing any audio imbalances.
Advanced Features: Some graphic equalizers offer advanced features such as parametric equalization, which allows precise adjustment of specific frequencies and bandwidths. Additionally, digital equalizers may have presets or user-defined profiles for different music genres.
Installation: In car audio systems, graphic equalizers are typically installed by professionals or enthusiasts who understand audio tuning. Proper installation and calibration are essential for achieving the desired sound quality.
In summary, graphic equalizers are audio processing devices commonly used in both home and car audio systems. They provide users with the ability to adjust the levels of specific frequency bands to tailor the audio output to their preferences or to compensate for acoustic characteristics of the listening environment. Whether in a home or car, graphic equalizers can play a significant role in achieving optimal sound quality.
Below you can find our editor's choice of the best graphic equalizer homes on the market
Behringer MiniFBQ FBQ800 Ultra-Compact 9-Band Graphic Equalizer with FBQ
Behringer
Product description
Ultra-Compact 9-Band Graphic Equalizer with FBQ
If we all lived in a perfect world, there would be no need for audio equalization. Sound systems would be perfect and would reproduce perfect signals in all their glorious perfection. Also, everyone in that perfect world would like the same amount of bass, midrange and high frequency, and there would be no such thing as feedback. But the world isn't perfect, is it? Even the best sound system can benefit from the use of a good EQ--like the FBQ800.
 Even the best sound system can benefit from the use of a good EQ. Click to enlarge. |
 1/4-inch and RCA inputs and outputs. |
 Nine steps of graphic EQ. |
How Does it Work?
Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these "lanes" represents a single octave of the sonic spectrum. The first four lanes, labeled 63 - 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1 k, 2 k and 4 k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8 k and 16 k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.
Feedback Elimination
When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs--that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. That's why feedback typically gets louder and louder the longer it's allowed to occur. Needless to say, this kind of feedback is very undesirable.
This is where the FBQ800's Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out--voilá, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.
Sonic Toolkit
That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and that's a lot!).
Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as fl oor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.
To Boost or to Cut, That is the Question
Raising and lowering specific frequency bands can improve the frequency response of any room's acoustics. For instance, if the room you're in is "bass-heavy," lowering the 63 and 125 Hz faders can help eliminate an overall "boomy" or "muddy" sound. Likewise, gently boosting the 8 and 16 k sliders can add sparkle to a somewhat "dark" mix. Are the vocals getting lost in the mix? Raising the level of the 1 k slider can help bring them out.
It's important to note that raising a single fader level is not always the best solution; it's often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.
Built for Accuracy and Reliability
Speaking of headroom, FBQ800's 6-digit LED Input/Output meters and level control are provided for precise level maintenance. Longterm reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components may be stacked to create an ultracompact signal processing solution.
What's in the Box
Behringer FBQ800 Ultra-Compact 9-Band Graphic Equalizer, Power Supply, User's Manual
- Ultra-compact 9.5" graphic equalizer for studio and stage applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as Audio Analyzer
- Additional Low-cut filter removes unwanted frequencies, e. g. floor rumble
- Accurate 6-segment LED input/output meters and Level control for precise level indication
- High-quality illuminated faders, potentiometers and illuminated switches for long-term reliability
User questions & answers
| Question: | What type of cables are required to hook this up between an amplifier and yamaha receiver? Much appreciated |
| Answer: | Both |
| Question: | Can you adjust each channel (left/right) separately |
| Answer: | Nope, the only things lit are the little indicator lights for power +/- 12dbs and something else. |
| Question: | I see many mention that they use this for helping hearing loss by using this unit with headphones. My question is how do you use this with headphones |
| Answer: | They are very clean sounding eqs. |
| Question: | does it connect to amplifier |
| Answer: | First, this is not a player. This is a tone control with instead of just the normal bass, treble and high, divides it into 31 (from 20HZ to 20KHZ). Also, this model is mono (1 channel). You can get 2 of these or get the stereo model. You still need an amplifier and a player. You hook this up between a like a CD player and your amp. |
Technics SH-8017 Stereo Radio Graphic EQ Equalizer 7 Band 2 Channel Tape Select
Product description
High quality Technics Sh-8017 Stereo Graphic Equalizer. It features Low Distortion, High S/N Ratio, and Electronic Band Pass Filter.
User questions & answers
| Question: | does this item works with a Turntable because I have one and I cant seem to get it to work |
| Answer: | This unit requires a compatible amp : receiver with Inputs and outputs to and from equalizer to amp. Basically you are running signal out of amp thru Equalizer and back into amp. Turntable should go into phono jack in amp, receiver. Very few new Receivers are able to accept equalizers. Older ones from the 1970’s are good. I had to buy a Yamaha R-S 700 receiver so everything would work. Contact me with any other questions. Good luck Michael |
| Question: | Is hoked up through rca plugs |
| Answer: | Yes |
| Question: | Need instructions on wiring it all together |
| Answer: | 1) 'Source' to EQ 'line in'. 2) EQ line out to receiver or amp. note: if multiple sources ie DVD, TV, B/T etc use a source switch for 'Source'. (like the TC-7240 4-way stereo lin router.) |
| Question: | Can you run a cd player through this eq |
| Answer: | Yes, but you will need an amp or receiver to power the output to make it audible...two ways to do it: 1) run the output from the CD player to the input of the Equalizer, and then the output from the equalizer to the amplifier/receiver - only the CD source will be "equalized" 2) run the output from the CD into the tape monitor input and then hook the tape monitor output to tape monitor input on an older style receiver (has to have tape monitor switch) , now all inputs to the amplifier /receiver will be "equalized" |
ART EQ355 Dual Channel 31-Band Equalizer
ART
Product description
The Model 355 Dual 31-Band 1/3 Octave Graphic Equalizer may be used in a variety of applications such as live sound, recording studios, instrument racks, DJ sound systems and fixed equipment installations. Designed to interface into any audio system, the Model 355 is a powerful tool for solving audio problems and creating interesting sound textures. The Model 355 possesses a long list of impressive features including: constant Q circuitry, 20mm center detent sliders (with a selectable boost/cut range of 6dB or 12dB), balanced XLR and 1/4? and unbalanced RCA input and output connections, adjustable high pass and low pass filters, variable input level controls, signal clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. The rugged, all-steel constructed chassis occupies 2U rack spaces and is intended for installation into standard 19? equipment racks. The 355 Dual Channel 31 Band EQ has the features and performance you need for any of your audio applications requiring precise equalization. Dimensions: 3.5?H x 19? W x 8.5? D Weight: 9.0lbs. (4.1kg) Frequency Bands: 31, 1/3 octave, ISO spacing Filter Type: Constant Q - 3% center accuracy Slider Travel: 20mm w/ positive center detent Range: +/-6dB or +/-12dB selectable High Pass Filter: 10Hz to 250Hz, 12dB/oct Low Pass Filter: 3kHz to 40kHz, 12dB/oct Input Connections: Active balanced XLR and 1/4? TRS {XLR pin 2, 1/4? tip = Hot (+)} Unbalanced RCA ...
- Constant Q circuitry 20mm center detent sliders Selectable boost/cut range of 6dB or 12dB Balanced XLR and 1/4" Unbalanced RCA input and output connections Adjustable high-pass and low-pass filters Variable input level controls Signal clip level indicators Ground lift switch Internal power supply Selectable line voltage switch Rugged, all-steel chassis 2U rackspace required
User questions & answers
| Question: | does it have 48v phantom for both XLR mic inputs |
| Answer: | No. |
| Question: | I have read this unit takes two racks spaces, albeit it states above it is 5.9 inches, so which is it? Thank you |
| Answer: | Just measured, the height is 3.5 inches. |
| Question: | Is this true?...i have been told that i cannot connect this to a onkyo 737 home theatre receiver because it does not have a tape loop |
| Answer: | Hi Steve. I looked up the Onkyo 737 so I could answer your question intelligently. I need to know how you want to use the EQ before I an give you a good answer. You could use the Zone 2 output to feed the EQ input and then connect the EQ output to another source input, say if you own a tape deck and you want to equalize the response, but I do not see the traditional "tape loop" that would enable you to equalize the front two channels irregardless of which source you pick. So the simple answer is no you can't use it effectively. Sorry. |
| Question: | whay are the in put / out put in each channel are crossing? like. rca has in put and out put on same channel |
| Answer: | RCA is unbalanced, meaning its susceptible to noise problems. XLR (and 1/4 trs - not 1/4 tr) are balanced, and more immune to noise problems picked up in interconnecting audio equipment. Balanced connections use shielded, twisted-pair cable and three-conductor connectors (like XLR or TRS connectors). This noise cancellation is called âCommon Mode Rejection.â It's also good for long cable runs. And so XLR and TRS cables are used to transmit balanced audio from one balanced device to another. In an audio rack you might be tempted to use an inexpensive cable like RCA because the cable runs are short. That's your choice, but the professionals use XLR cables for the cleanest sound they can engineer. |
dbx 231s Dual Channel 31-Band Equalizer
dbx
Product description
When the pros need an EQ, they turn to db. With a proven track record that spans four decades, dB EQs are the industry standard for touring, studios, and audio installations. With the db. heritage of revered Pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The db. 231s includes two 31-band channels of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, The 231s offers exceptional sound and rugged reliability that s you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, The db. 231s is destined to take its rightful place in the lineage of great dB signal processors that are the professional's choice in signal processing. With such affordable quality, There's no longer any excuse for compromising your sound.
- Dual 31-band, 1/3-octave constant Q frequency bands
- Switchable boost/cut ranges of 6 or 12 dB
- Front panel bypass switch
- 12 dB input gain range
- 4-Segment LED ladders for monitoring output levels
- Inputs: ¼” TRS and female XLR (pin 2 Hot)
- Outputs: ¼” TRS and male XLR (pin 2 Hot)
User questions & answers
| Question: | Can the rack "ears" be cut off ? I have a very strict width limit |
| Answer: | Any ears can be cut off, but I would be very careful. If you damage the corners, the integrity of the cabinet is gone. |
| Question: | If using xlr to rca connector will it make noise |
| Answer: | rca connectors are typically noisy on any application. |
| Question: | Does this amp have low frequency’s for body shaking bass |
| Answer: | It is not an amp. You will need an amp between this and your speakers. This adjusts the bass thru treble in 31 frequency bands from 10-20K HZ. I'd suggest Googling graphic equalizer if you are not sure! |
| Question: | Can it be used in a car |
| Answer: | At 19" wide and several inches deep, requiring a/c power, I can't envision a situation where it would be practical to use this product in a car. Also, electrical noise from car electronics would be a factor. |
Product features
dbx 231s Graphic EQ
When the pros need an EQ, they turn to dbx. The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended frequency response and dynamic range, to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Yamaha Q2031B Dual-Channel Graphic Equalizer
Product description
Q2031B Dual-Channel Graphic Equalizer. "Highly sophisticated stereo 31-band graphic eq from Yamaha, the Q2031B Dual-Channel Graphic Equalizer features an automatic muting circuit. Mutes output for 3 to 5 seconds after power is switched on. The Yamaha Q2031B includes 6 or 12dB of boost or cut, with points centered at ASO 1/3 octave frequencies from 20Hz to 20kHz; both balanced XLR connectors and standard unbalanced phone jacks."
- Impeccable Yamaha sound quality
- Switchable 6db or 12db control range
- High-pass filter kills stage rumble
- "XLR and 1/4"" connectors for any hookup"
- " "Highly sophisticated stereo 31-band graphic eq from Yamaha, the Q2031B Dual-Channel Graphic Equalizer features an automatic muting circuit
Rolls EQ570 Audio Equalizer
Bellari Audio
Product description
The EQ570 is a solid well built four band EQ. With extremely low phase shift, and gradual curve filters that make it one of the most musical sounding EQ’s we have ever built. -RCA inputs and outputs -3.5mm (1/8") stereo inputs and outputs -The EQ570 can be used in many places for audio improvement. -Simply plug your source (phone, tablet, DAC, CD player or other player) into the EQ570 then out of the EQ570 to your preamplifier or headphone amplifier. -It can fill the role of a turntable only EQ for your system. From your phono pre/stage to the EQ570 then out to your preamp. You must use a phono pre/stage with the EQ570 for your turntable. -It also can act as a whole system EQ by plugging the output of your preamp into the EQ570 then out to your amplifier
- Input Impedance: 47k
- Output Impedance: 47 ohms
- Frequency Response: 5Hz to 154kHz
- THD: .003% @ 1KHz
- Power supply included
User questions & answers
| Question: | Bellari eq570 audio equalizer has universal 100-240v power supply |
| Answer: | It comes with wires, not adapters, though the wires included are junk and should not be used. The speakers are good but the wires that come with are horrible. |
| Question: | Are there any audio enhancers/equalizers that have Optical inputs & outputs |
| Answer: | Look up your car speakers size and see, but the 6x9 should |
| Question: | Can this be stacked with the PA550 amp |
| Answer: | Yes all four were received |
| Question: | Could I attach a powered subwoofer to the 3.5 input/output connections? This would be in addition to using the rca connections for a turntable |
| Answer: | They are pretty standard speakers they should |
Nady A-B Box, equalizer, graphic (GEQ-215)
Nady
Product description
Nady A-B Box (GEQ-215)
- Active balanced XLR, 1/4" TRS and unbalanced RCA inputs and outputs
- Constant Q bandwidth from each filter with 3% frequency accuracy
- Parallel filter design for minimal phase distortion
User questions & answers
| Question: | are the sliders lighted |
| Answer: | No, this is a single channel equalizer, if you bought 2, one for each channel it would work. But there is a better answer, the ART 341 is dual channel for stereo systems. However it comes with 15 band per channel, 2/3s octave. Better function in my estimation. And provided you have RCA input, mini-plug or 3 prong connections on your amp, going from CD to amp to eq to speakers is easy. This eq is by far the most versatile of the ART eqs. |
| Question: | Can it be used on 220v |
| Answer: | YES |
| Question: | is this for cars or home stereo |
| Answer: | Cables are not included. Cost depends on brand. |
Massive Audio EQ9 – 9 Car Equalizer with 9 Band Graphic Equalizer - Aux Inputs - 7V RCA Outputs - 18dB Crossover
Massive Audio
- TOP RATED CAR AUDIO EQUALIZER | The Massive EQ9 is a half din 9 Band Graphic EQ that will correct peaks and dips in sound characteristics associated with most vehicles' interior that dampens and limits both speaker output and imaging. This EQ provides powerful features in a compact size.
- MORE TUNING CONTROL | With Stellar features such as: Adjustable Master Volume Level Control, Adjustable Active Gain Preamp, 2-Channel RCA Input with Adjustable Gain, 9 Band Graphic Equalizer, 1/2 DIN, 8V Output Line Driver, RCA Auxiliary Inputs, 6-Channel/ 7V RCA Outputs, you can take full control on how you like your music to sound Clearer, Better, Perfect!
- SAY GOODBYE TO WHITE NOISE | Don't waste your time or money on cheap quality Car Audio Equalizers that produce a lot of background noise. With Subwoofer Output Built-in 18dB per Octave electronic X-Over fixed @ 60Hz or 120Hz, and Extended Frequency Response from 20Hz~30Hz/100dB S/N, you're sure to get great crossovers and perfect sound quality.
- EASY TO INSTALL. LONG LASTING. | The Massive Audio EQ9 Band Car Audio Graphic Equalizer is easy to install and produces amazing results for years! The EQ9 is the perfect device to enhance your Car Audio's performance, and the Best Car Equalizer in its class! Dimensions: 7"(W) " 1"(H) " 4 1/8"(D)
- MASSIVE AUDIO QUALITY | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.
User questions & answers
| Question: | How hard is it to hook up a equalizer to my Kenwood car stereo |
| Answer: | Depends - But I'd imagine that if you are capable of installing the HU then the EQ should be just as easy. Has the 3 typical: power. ground, remote and then the input and output(s) <-- or whatever way you plan on using the EQ. All else fails, go to YouTube and watch one of the many videos. I tried "how to install a car EQ" and it came back with "about 347,000 results" I bought this EQ and am extremely pleased with what I got for the price of this thing. Buy it. figure out to install it. It is worth it |
| Question: | Would this make a huge difference with 4 6.5 mids and 2 tweeters |
| Answer: | It definitely would. Thats exactly what I have |
| Question: | This can be used to take the 2 rca inputs from head unit and make them multiple rca outputs for a 5 channel amp |
| Answer: | Yes, I have 2 AMPs connected to it. I have a 4 channel 1000 watt Rocksford Fosgate AMP pushing the highs and mids to the 6x9s and door speakers. And I have a 8000 watt Power Accoustik AMP pushing the Bass. The 1st knob is independent bass that controls my Power Accoustik AMP. The 2nd Knob is the overall volume. So the answer is Yes. It controls my 4 channel AMP and my Mono AMP at the same time. |
| Question: | Does thing have separate inputs channels for front and rear speakers |
| Answer: | Having trouble with my 4 channel head unit (Alpine) - I have separate front and rear L/R RCA outputs coming from the head - I plugged the front RCA outputs into the "main" which works ok, but no place to plug in the rear output RCA cables.... |
Product features
EQ9 Car Audio Equalizer
The Massive EQ 9 is a half din 9 Band Graphic EQ that will correct peaks and dips in sound characteristics associated with most vehicles' interior that dampens and limits both speaker output and imaging. This EQ provides powerful features in a compact size.
Audiopipe EQ-709X 7-Band Graphic In-Dash Equalizer
Audiopipe
Product description
Every true audiophile should be able to tweak their sound system however they'd like to get the perfect sound. The Audiopipe EQ-709X 7-Band Parametric Graphic Equalizer can help get you there. The universal half-DIN-sized chassis gives you clean mounting options above or below most decks if you have room and the gold-plated RCA input connectors ensure that you always get the most signal. You'll even be able to control the volume of your subwoofer output independently with this EQ. Put yourself in the driver's seat of your music and system with the Audiopipe EQ-709X 7-Band Parametric Graphic Equalizer.
- USER-FRIENDLY: Nickel-plated locking adjustable knobs for user-friendly operation
- CUSTOMIZED CONTROLS: Adjustable subwoofer frequency and subwoofer output and level controls for customized use
- EASY INSTALL: Universal half-DIN chassis for ease of installation
- ADJUSTABLE SENSITIVITY: Active gain pre-amplifiers with adjustable input sensitivity for maximum performance
- SPECIALIZED CONTROLS: Individual left and right sensitivity controls for auxiliary input
User questions & answers
| Question: | How many input and outputs |
| Answer: | Have not received it as of yet |
| Question: | ese equalisador silve en el puesto del crossover |
| Answer: | Tú quieres un EQ o un crossover ? Son 2 cosas diferentes |
| Question: | What are the Dimensions for this Equalizer |
| Answer: | 6 3/4 x 4 3/4 x 1 |
Amazon Basics Body Equalizer Bars
Amazon Basics
Product description
An Amazon Brand
- Body equalizer bars support a wide range of full-bodyweight resistance exercises, including push-ups, pull-ups, dips, knee raises, leg raises, and more
- Made of steel for rugged, reliable strength; bright red finish for clear visibility
- Accommodates users weighing up to 330.7 pounds (150kg)
- For safety, please read the included manual before using the equipment
- Measures 18 by 33 by 24.4 inches; weighs 23.1 pounds; backed by an Amazon Basics 1-year limited warranty
User questions & answers
| Question: | Can a 69 year old senior woman with very little strength use and benefit from these |
| Answer: | Of course. They'd be great for doing low intensity push-ups or low impact leg stretches and maybe just some stretching. |
American Bass High End 7 Band Equalizer Voltage Display
American Bass
Product description
7-Band Parametric Pre-Amplifier With Digital Display. Max Output Voltage: 7v Rms. Pre Graphic Frequency: 50hz, 125hz, 315hz, 750hz, 2.2khz, 6khz, 12khz. Equalization Range: +- 12db. Subwoofer Frequency: 30hz-300hz. Input Impedance: 15k Ohms. S/N Ratio: 90db. THD: .05%. Channel Separation: 70db. FREQ. RESP.: 10Hz-50khz.
- Frequency Steps: 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 12KHz.
- 7 V Preamp Output. 2 RCA Inputs. Fader Control.
- Sub Frequency (30-300Hz) and Volume Control.
- Dimension: 9"Lx 8"Wx 2"H.
User questions & answers
| Question: | What color does it light up |
| Answer: | Blue |
| Question: | Does the sub control work independently |
| Answer: | Yes it does |
| Question: | Would this be good with a home system? I am looking to control the 10 speakers in my restaurant, So I can turn down certain sections |
| Answer: | Not for home..... car audio only |
| Question: | I have amplifiers... a mono for the sub and a four channel for my cabin speakers. Can i use this eq with the amps |
| Answer: | yes you can I have a similar set up with for amps and I use this equalizer and it's very good |
Latest Reviews
View all
Home It Home Organizers
- Updated: 12.04.2023
- Read reviews
Cooker Timers
- Updated: 12.07.2023
- Read reviews
Paint For T Shirts
- Updated: 18.05.2023
- Read reviews
Lixada Backpacking Stoves
- Updated: 14.07.2023
- Read reviews
Ice Fishing Apparel
- Updated: 05.06.2023
- Read reviews