13 best audio component equalizers

Product description

The EQ570 is a solid well built four band EQ. With extremely low phase shift, and gradual curve filters that make it one of the most musical sounding EQ’s we have ever built. -RCA inputs and outputs -3.5mm (1/8") stereo inputs and outputs -The EQ570 can be used in many places for audio improvement. -Simply plug your source (phone, tablet, DAC, CD player or other player) into the EQ570 then out of the EQ570 to your preamplifier or headphone amplifier. -It can fill the role of a turntable only EQ for your system. From your phono pre/stage to the EQ570 then out to your preamp. You must use a phono pre/stage with the EQ570 for your turntable. -It also can act as a whole system EQ by plugging the output of your preamp into the EQ570 then out to your amplifier

• Input Impedance: 47k
• Output Impedance: 47 ohms
• Frequency Response: 5Hz to 154kHz
• THD: .003% @ 1KHz
• Power supply included

User questions & answers

Question:	Bellari eq570 audio equalizer has universal 100-240v power supply
Answer:	It comes with wires, not adapters, though the wires included are junk and should not be used. The speakers are good but the wires that come with are horrible.
Question:	Are there any audio enhancers/equalizers that have Optical inputs & outputs
Answer:	Look up your car speakers size and see, but the 6x9 should
Question:	Can this be stacked with the PA550 amp
Answer:	Yes all four were received
Question:	Could I attach a powered subwoofer to the 3.5 input/output connections? This would be in addition to using the rca connections for a turntable
Answer:	They are pretty standard speakers they should

Product description

Variable subwoofer output control, main/ DVD input selector. Brand of Quantum. Manufactured in China.

• Variable subwoofer output control, main/ DVD input selector
• Brand of Quantum
• Manufactured in China

User questions & answers

Question:	Works only for dvd or can be used it on other analog audio equipment
Answer:	Great Knife it is 1 3/4 " at the handle end and 1 5/8 in the middle The blade length is 8 " I bought 5 for xmas presents

Product description

Skar Audio engineered the SKA7EQ 7 band 1/2 DIN car audio graphic equalizer so that you can finally take full control over your car audio listening experience, dialing the sound into perfection. Featuring two sets of RCA inputs (main and a selectable auxiliary input), this EQ takes your input signal and allows you to modify and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (the subwoofer out-put channel features an independent volume control knob on the front of the unit as well). 7 fully adjustable -12 dB to +12 dB EQ bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with built-in fader control.

• 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
• Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
• High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
• 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
• Take Full Control Over Your Car Audio System with this EQ | Signal-to-Noise Ratio: 100 dB, Low Pass Frequency Switch: 60 Hz / 120 Hz
• Includes Installation Mounting Brackets and Hardware | 20 dB Headroom Eliminated Signal Overload
• Included components: Installation Brackets and Hardware

User questions & answers

Question:	How would you wire this to a head unit that has a front, rear and subwoofer channel? Would you only use the front and rear and toss the other set of r
Answer:	So with only one input from the head unit does the eq convert it to front and rear sound? What I mean do you loose the rear sound or does it just double and split the front channel?
Question:	Does this product light up
Answer:	Yes it lights up blue cleaned up my audio very well
Question:	Anyone els experiencing a popping noise when you take key out ignition if so any ideas on how i can stop it? I already tried grounding it to radio
Answer:	Had the same issue with ankther brand EQ. Problem went away when I switched the positive from the EQ and attached it to the yellow cable straight to battery not the red to ignition. That should fix it.
Question:	How would you do the power wire i see theres one in picture with a fuse but isint that to short
Answer:	Hello, No the Red wire with fuse holder is not to short. The longer side of the Red wire goes to the Scar SKA7EQ, On Back of the SKA7EQ is the power, ground, and Remote terminal. The Red wire will be extended with a 14awg wire to your power source. Source could be the car battery, or an Accessory fuse circuit of 10 amps 12volts DC current. Extending this red wire is Normal in the audio installation world. The coupling will be needed to successfully butt the two wires together and crimp both sides, if u like install the double red wire size with Heat Shrink Tubbing, then Couple the wires with the "Butt Connector" , slide the heat shrink over it and heat the heat shrink with a Heat Gun, or powerfully hair dryer, then run the Red wire to the Accessory, or Battery positive Red Terminal. The same thing for the ground wire, black wire has no fuse in line so Run from your battery Negative Terminal Black, to the Scar SKA7EQ next to the Red wire, and Tighten it down to the SKA7EQ. The Remote wire is "In the business of Audio Installation" Traditionally Blue, Or Purple, Strip 4mm, or 3/8" and Install it into the Scar SKA7EQ at the R terminal, R stands for "Remote" or "Trigger" this Blue, Or Purple wire goes to your amplifier, and at the amplifier you will see a Positive terminal, a Negative Terminal and the R, "Remote" terminal the Blue or Purple Remote wire tightens onto the amp in the R terminal spot. The wire should be all 14 AWG for this. Wiring your amps u should at least use 4awg for both Power and Ground, Directly to the car/boat/atv Battery. Use small spools of OFC Copper, Red Positive, Black Negative, and Blue/Purple Remote from amazon, You have to have Amplifiers in your system to use the SKA7EQ. Get an Amplifier install kit, plus the three spools of 20ft of 14 AWG Red, Black, Blue from amazon....Good Luck.

Product description

High quality Technics Sh-8017 Stereo Graphic Equalizer. It features Low Distortion, High S/N Ratio, and Electronic Band Pass Filter.

User questions & answers

Question:	does this item works with a Turntable because I have one and I cant seem to get it to work
Answer:	This unit requires a compatible amp : receiver with Inputs and outputs to and from equalizer to amp. Basically you are running signal out of amp thru Equalizer and back into amp. Turntable should go into phono jack in amp, receiver. Very few new Receivers are able to accept equalizers. Older ones from the 1970’s are good. I had to buy a Yamaha R-S 700 receiver so everything would work. Contact me with any other questions. Good luck Michael
Question:	Is hoked up through rca plugs
Answer:	Yes
Question:	Need instructions on wiring it all together
Answer:	1) 'Source' to EQ 'line in'. 2) EQ line out to receiver or amp. note: if multiple sources ie DVD, TV, B/T etc use a source switch for 'Source'. (like the TC-7240 4-way stereo lin router.)
Question:	Can you run a cd player through this eq
Answer:	Yes, but you will need an amp or receiver to power the output to make it audible...two ways to do it: 1) run the output from the CD player to the input of the Equalizer, and then the output from the equalizer to the amplifier/receiver - only the CD source will be "equalized" 2) run the output from the CD into the tape monitor input and then hook the tape monitor output to tape monitor input on an older style receiver (has to have tape monitor switch) , now all inputs to the amplifier /receiver will be "equalized"

Product description

9 Band Parametric: 50Hz, 125Hz, 250Hz 500Hz, 1KHz. 2KHz 4KHz, KHz, 16 KHz. 9V Line Driver. Nickel plated locking adjustable knob. Adjustable subwoofer frequency: 60Hz/90Hz. Universal half-din chassis. Active pre-amplifiers with adjustable input sensitivity. Individual left and right sensitivity controls for auxiliary input. 20dB headroom output and level controls. Subwoofer output and level controls. Gold-plated RCA input connectors. Three stereo RCA outputs. Main/auxiliary input selector.

• Audiopipe 9 Band Equalizer

User questions & answers

Question:	What size replacement fuses
Answer:	3 amp
Question:	Is this able to be used for home audio
Answer:	WHY IS THIS NOT FOR HOME USE? I REQUIRES A 9 VOLT POWER SYSTEM, BUT WHAT ELSE IS DIFFERENT. PLEASE ANSWER BECAUSE TO ME AUDIO COMPONANTS SUFFER EXCESSIVE VIBRATION AND JOLTS AS WELL AS MOISTURE FROM SPILLS AND HUMIDITY. PLEASE ADVISE. I'M NOT THE ONLY CURIOUS BUYER OUT HERE! RIGHT BROTHERS AND SISTERS? THANX, TOM
Question:	Is it for a car or home stereo
Answer:	Car
Question:	can this be used as home eq between tv and soundbar
Answer:	Yes, it absolutely can be used between a sound bar and a TV. You will need to purchase a 12volt power supply, that is capable of at least 20 amps. And depending on how you get your sound to your sound bar, it can be put inline if you use the headphone out jack to a RCA's. Then you can input the sound directly into the EQ, then into the sound bar, if the sound bar allows for an RCA input from a source. I have several set ups like this in my house. I should probably write a tutorial on how to set this up as it is not expensive and I'm sure a lot of dudes would like more control over their sound. If you guys ask, I will create an article on this.

• DESIGN: OSD Audio’s Pre-1 is a unique preamplifier that accomplishes the subtle audio tasks that takes an ordinary audio source management to the next level.
• SOUND QUALITY: The Pre-1 assists in experiencing a true home theater surround sound. It allows the ear to hear every detail for an enhanced audio environment.
• POWER: A low frequency filter gives a response of 5Hz-30kHz +0 -3dB in order to have the ultimate powered preamp for a home recording or stereo system.
• CONTROLS: The front panel has adjustable mic level control, input selector, microphone jack output, and mute option. It controls the bass for midrange, treble, loudness and balance control.
• SIGNAL: A preamp is an important element for music recording to boost the low-level output on microphones. It provides a better recording signal compared to standard equipment.

User questions & answers

Question:	How would this work with a Carver M1.5 amplifier
Answer:	Yes
Question:	Can i hook it up 2 a Samsung vintage amplifier
Answer:	Yes
Question:	It is possible to amplify or equalizer the output earphones of one old tv to couple my yamaha r-s700 (3.5mm to rca connect
Answer:	No
Question:	What are the specs on this preamp? what is it's s.t.n.r. on the cd output and what is the t.h.d. percentage
Answer:	Yes

Product features

RECORDING

OSD Audio’s Pre-1 preamplifier delivers benefits to music recording by boosting the low-level output on microphones.

INPUTS

The OSD Audio preamp provides 4 selectable unbalanced analog RCA inputs: Phono, AUX1, AUX2, and CD/DVD with a ¼” Mic input jack on the front panel, featuring an adjustable mic level control.

KNOBS

The Pre-1’s other front panel variable control knobs feature 3 tone controls: Bass, Mid, and Treble, plus Balance, Master Volume, and Loudness Contour Knobs with Min to Max settings.

CONTROLS

Additional Pre-1 front panel controls include a Power Switch, Tape Loop, Mono/Stereo, Low Filter, and Mute Buttons.

OSD Audio Pre-1 High Definition Preamplifier

OSD Audio’s Pre-1 is a unique preamplifier that accomplishes the subtle audio tasks that takes an ordinary audio source management to the next level. A preamplifier is a low-level amplifier. It takes a line level signal and amplifies it enough to drive the power amplifier to its rated output. If an amp is receiving a signal at its rated output, it will perform better and your surround system will pick up detail you never thought possible.

Product description

BEETLEJUICE - Red Tuxedo Limited Version - Statuette Bishoujo 21cm

• 4934054018345

Product description

Item Description:

1. Karaoke Effector with Speaker Processor Function. Functions of each part can be adjusted independently.

2. 2 bit data bus and 32 bit DSP are adopted.

3. Music has 7 pieces of parametric equalization. Music to Main Output High Pass Filter: 12dB/24dB(0Hz - 303Hz )

4. The microphone is equipped with 15 segments of parametric equalization. It has a microphone pressure limit function.

5. The main output is provided with 5 sections of parameter equalization. There is a compression limiter.

6. The center output, bass output and rear output are all provided with 3 parameter scales.

7. The microphone has 4 feedback suppression modes: OFF 1 2 3.

8. 16 modes can be stored.

9. Microphone output, main output, center output, bass output and rear output are all provided with pressure limit and delay functions.

10. There are manager mode and user mode. User mode cannot be stored after adjusting parameters.

11. The machine is equipped with a full-function menu, which can be set through the PC interface.

Product Details:

Effector remote controller: It is easier to operate and adjust with the remote controller.

High quality process interface: The rear panel is equipped with audio input port, cannon output port and data line interface, which makes the connection more stable and comfortable.

Computer debugging interface: The back is equipped with a data cable interface, and we are equipped with two data cables.

Digital panel operation: Knob left decreases, knob right increases, adjustment is more convenient.  UP/ESC up panel, Down down panel.

• Professional Digital Effector: Anti howling system, eliminate interference sound, and listen to heavenly sound quality.
• 3 Microphone Channel Connection: 3 microphone channel design, using 6.35 hybrid wiring, connection is more convenient, interface technology is good.
• Intelligent Computer Control: 7 segment music equalization / 15 segment microphone equalization.
• 7 Rows of Quick Freezing Heat Dissipation Openings: Ventilation heat dissipation openings are arranged at the top of the machine, which can rapidly dissipate heat and protect the inside of the machine and prolong its service life.
• Distribution of CD ROM Installation Software: Installation is more convenient, debugging is more professional, just for you who are pursuing sound quality, put the CD into DVD and install it directly.【If there’s any problem,please don’t hesitate to contact us, we are very happy to help and strive for good customer service】

User questions & answers

Question:	This one is 110v or 220v. or it can be used for both. why do i find the recording is 220v - 50hz - 30w
Answer:	I'm not sure what your doing wrong. This EQ is set up with inputs and outputs that aren't laid out like regular stereo equipment. Inputs and outputs are not color coded and each channel is not marked left or right, but 1 & 2. Pick one side for you left and plug the input from your device (cd player, phone, etc) into it and run the output to one of your inputs on the amplifier, either left or right. Do the same for the other channel. I ended up marking L and R on the front of my EQ panel so I can adjust the stereo. Hope this helps.
Question:	What voltage A.C input 120v or 230v
Answer:	Assuming it is the amplifier which accepts or requires RCA cables, your idea should work if you only want the EQ effects for the iPad. Because the EQ341 is dual channel, you can also route another source to other channels if the amp/tuner has more than one (for example, CD, Phono, Aux, etc.).
Question:	Does software come in English
Answer:	It depends on whether you're looking at the front or rear of the equalizer. The channels aren't labeled "right" and "left" but rather "one and "two". If you want your left channel to be indicated on the left side of the front equalizer panel, use the inputs and outputs for channel one, which are on the "right" side of the rear panel.
Question:	What’s the difference among the x5, s5 and the rev
Answer:	The actual unit width is 19.0" including the mounting ears (non-removable). The body of the unit (not including the ears) is about 17.5" wide. The entire unit will tightly fit inside a 19" wide space. Not sure what the 21.5" is referencing.
Question:	how do I hookup EQ to mixer using rca jacks? I am getting no signals
Answer:	I don't get your question... sorry
Question:	If i'm running from my i pad into the eq and then into my amp/tuner with rca cables which rca inputs do i use? thanks
Answer:	It is not visibly one piece, but the handle tip is the same material as the blade. I appears one piece.
Question:	The rca in's/outs i assume are left rca's=left channel - right rca's= right channel. i just bought this and the rca's are not color coded. correct
Answer:	In general the difference between a utility knife and a boning knife is one of heft. A utility knife if generally thicker and meant for rougher work. They generally don't hold an edge as long. A boning knife is generally sharper and more flexible for work around the bone.
Question:	I'm confused, says this is 19'' rack mount but description says 21.5''. I need this to fit into a 19'' non-rack space, will it fit
Answer:	Yes, I put them on the magnetic knife holder.

Product description

Brand New Alpine SXE-1750S 6.5 2-Way 280 Watts Peak / 45 Watts RMS Component Car Audio Speakers with High Polymer Foam Edge and Long Fibre Natural Pulp Cone

• 6.5 inch Car Audio 2-way Component Speakers (Pair)
• RMS Power: 45 watts per pair / 90 watts each | PEAK Power: 560 watts per pair / 280 watts each
• Frequency Response: 60Hz - 20,000Hz
• Sensitivity: 90 dB | Impedance: 4-ohms
• Mounting depth: 46,5mm

User questions & answers

Question:	Do these speakers fit a 2011 jeep wrangler Sahara unlimited (4 door
Answer:	It is 110V voltage input. No recording output.
Question:	What size are the tweeters
Answer:	110v-220v
Question:	Can i put 4 of this speakers, 2 front, 2 rear, without amplifier, i have Opel Tigra with fabric speakers and radio
Answer:	Dear,our software come in Chinese and English.Is very easy to operate.
Question:	Do these have crossovers
Answer:	Dear, X5 and S5 are the same effectors, but their models are different. Our effectors are regulated by anti-howling, equalization and reverberation. The microphone has 15-segment equalization and the music has 7-segment equalization, which is very powerful. It can also be controlled by computer. X5/S5 is a digital effector and can be controlled by computer. The rev3900 is analog, mainly for panel adjustment. Audio processing is also directly adjusted by several knobs on the panel, and the cost performance is better by X5. The main difference is that one is digital and the other is analog. These two models are our best sellers. If you have any questions, welcome to consult us by email. Thank you!

Product description

The EQS755 is 1/2-DIN chassis Graphic EQ w/ built-in low-pass filter. Equipped with a full-featured 7-band Graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.

• 1/2-DIN chassis graphic equalizer with built-in low-pass filter6-channel/ 8-Volt RCA outputs (front, rear and subwoofer)7-ban graphic equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2Khz, 6Khz, 16Khz)
• 3.5mm Front aux input2-channel RCA aux input with variable gain adjustments and high level speaker inputs
• Blue illuminationindependent master volume and subwoofer level Control with fader control select able 12Db low-pass Filer (60Hz or 90Hz)
• Ground loop isolation circuit Dimensions: 7"(w)x4-1/4"(l)x1"(h)

User questions & answers

Question:	What size are the screws
Answer:	Do not know. But it is well made and probably not need of repair for a long while to come.
Question:	Can you hook this up to subwoofer and door speakers? Got 3000watt ssl evo amp and 2500watt audiotek for doors. Please help
Answer:	Yes ,I guess so
Question:	does this amp remove distorcion and make speakers louder
Answer:	Yes it's a 2 channel equalizer
Question:	Does this double as a line converter for factory sterols without RCA outputs
Answer:	I ordered these twice and got 5 pieces with each order

• Package Includes: Rockville REQ20 19" Rack Mount Pro Dual 10 Band Graphic Equalizer EQ w/VU Meters, Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
• Features Of REQ20: Dual 10 Band Graphic Equalizer (20 Bands Total), Frequency Response: 20Hz - 20KHz, Dual VU Meters Level Monitor, Blue LED on each Equalizer Slide Control, Stereo RCA Line Input, Stereo RCA Line Output
• Vacuum Fluorescent Display, Bass/Midrange/High EQ Controls, Separate Left/Right Channel Volume gain control, Signal to Noise Ratio: >88dB, Input Power: AC ~ 110V 60H/220V 50Hz, 110/220V Switchable, Front Panel Power Switch, Removable Rack Mount Brackets, Dimensions: 17"(19" w/brackets) x 9" x 2.2", Weight: 5 lbs
• Features of RCDR10B: Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable, Dual RCA to Dual RCA, Nickel-Plated for Rugged Durability and Efficient Signal Transfer, 100% Copper Conductors for Enhanced Signal Clarity, OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility, Length: 10 Ft, Color: Black

User questions & answers

Question:	Will this work with denon avr 2112ci receiver
Answer:	Yes you can. I only use 2 channel receivers. Not into cinema and avr receivers. I use an external audio source selector. Available on Amazon. Mine handles 3 sources. But selectors with more source inputs are available. I run my sources to the inputs on the selector. Then run the single output to the auxiliary input or in the case of newer receivers, input 1,2 or 3. For my application it works very well. Technically you can connect this eq to your Denon or any other receiver without the in out loop.
Question:	what would cause this to make an awfull hissing sound ? right now its useless
Answer:	Trying to diagnose sound equipment is not always easy. A hum usually means a bad ground. A his could be a lose connection or a bad cable. First see if the noise is on both sides or just one. Single side noise try changing a cable from the left to the right to see if the hiss changes sides. If it does change does change out the cable. If the his stays then you have a speaker problem. If the his is on both sides check your ground. Hope this helps.
Question:	Can I connect this to a yaqin mc-13s
Answer:	You should beable to if u use aux cables for it
Question:	Can it be connected straight to a 200 watt am/fm home reciever
Answer:	Yes it will work very good with all types of recievers And 200 watts that's enuff to do alittle bit on thumppin I also have 200 watt receiver and with ROCKVILLE SOUNDS EVEN GREAT DEPENDED ON UR SPEAKER SIZE I HAVE 2 15 AND 2 SURRENDER NICE

Product features

Rockville REQ20 19" Pro Rack Mount Dual 10-Band Graphic Equalizer EQ+VU Meters

Package Includes:

• Rockville REQ20 19" Rack Mount Pro Dual 10 Band Graphic Equalizer EQ w/VU Meters
• Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper

_________________________________________________________________________________________________________________________________________________________________

Features of REQ20:

• REQ20: Dual 10 Band Graphic Equalizer
• Dual 10 Band Graphic Equalizer (20 Bands Total)
• Frequency Response: 20Hz - 20KHz
• Dual VU Meters Level Monitor
• Blue LED on each Equalizer Slide Control
• Stereo RCA Line Input
• Stereo RCA Line Output
• Stereo RCA Line Output for Record
• Vacuum Fluorescent Display
• Bass/Midrange/High EQ Controls
• Separate Left/Right Channel Volume gain control
• Signal to Noise Ratio: >88dB
• Input Power: AC ~ 110V 60H/220V 50Hz
• 110/220V Switchable
• Front Panel Power Switch
• Removable Rack Mount Brackets
• Dimensions: 17"(19" w/brackets)  x 9" x 2.2"
• Weight: 5 lbs

_________________________________________________________________________________________________________________________________________________________________

Features of RCDR10B:

• Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable
• Dual RCA to Dual RCA
• Nickel-Plated for Rugged Durability and Efficient Signal Transfer
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
• Length: 10 Ft
• Color: Black

Product description

This equalizer gives you four bands ranging from 50Hz to 20 kHz, allowing you to tune your car stereo system to your particular vehicle. The subwoofer level control and fader control make it easy to set up your system.

• 2 Source Input, Front, Rear, Sub Outputs
• 4 Band: 50 Hz, 200 Hz, 2 kHz, 20kHz; ± 12 dB
• Selectable Subwoofer Filter
• Subwoofer Level Control, Fader Control
• Master Volume Control
• Pre-amp Output: 7 V
• Dimensions: 3-15 / 16" (L) x 6-3 / 4" (W) x 1-3 / 16" (H)
• 1 Year Warranty

User questions & answers

Question:	Does this come with a harness for the positive negative and remote connection.does not look like wires can be connected to the connections on pre amp
Answer:	It doent come with any harnesses. Didnt understand the second part of you question
Question:	Not impressed. put a rf noisr in all my speakers. sub gain. goes first quarter the way with no change. then it over does it
Answer:	No
Question:	My crossover doesn’t have a harness can I purchase that without purchasing a whole new set up
Answer:	Theses crossovers are fairly cheap. I don't see where anyone is offering just the harness.
Question:	I'm no audiophile, price aside, would you say this unit is the better choice over the clarion mcd
Answer:	yes i say the prices is better and the sound is the same

Product description

Product Highlights: Most equalizers used for live sound mixing will allow you to affect frequencies across a variable frequency range. In general, if you’re trying to tune a sound by emphasizing desirable frequencies or pulling back less important frequencies, then you’ll be better off keeping the bandwidth fairly broad. On the other hand, if you’re trying to notch out hum, tame hiss, or carve out some other unwanted sound, then you’ll preserve your overall sound better by narrowing in on the frequencies you want to remove. Once you get into the world of digital mixers, studio-style fully parametric EQs become more common. These equalizers not only allow you to adjust the center frequencies of the mid bands, but they also allow you to dial in the bandwidth to make precise alterations to your sound, boosting board frequency ranges for added warmth or notching out an annoying resonance at 1.5kHz. While this surgical precision can be incredibly useful, it’s important not to get mired in minutia that can take up time you simply don’t have in live music production. That's why we are introducing our best Spectrum Equalizer for the price. It's an all around EQ's that everybody love. Great Sound! Great Light! Technical Details: Dual 10 Bands EQ With Blue LED Four Audio Source Line Input 4 RCA line input 2 RCA line Output Removable Rack Mount Brackets Spectrum Graphic Display Screen 110V/220V Switchable Power Source Dimensions: 16.9'' x 9.3'' x 2''

• Ten Bands of graphic EQ per Channel
• Multi-colored spectrum analyzer display shows the output of the system
• LEDs in all sliders, Two Line inputs and dual tape monitor loops
• Tuner | CD | TAPE | DVD inputs!
• Power supply MAX:20W
• NOTE: Refer the User Manual before use which is highly essential.

User questions & answers

Question:	can the output be sent to headphones
Answer:	No your source is put into the EQ and out to your amp
Question:	What are the actual dimensions. Is it 2” or 4” tall
Answer:	Around 4" it is a piece of junk I threw mine in the trash. Go to ebay they have lots of equalizers on there.
Question:	When in operation, what does the center window display
Answer:	The center window is NOT spectrum analyzer. It is one color only, and they all move at the same time. This equipment is junk, it is not worth more then 20.00
Question:	Can i hook this up to my home component cd player, or do I need a reciever also
Answer:	you can hook this up in line between a component, cd player, going to an amp. this will not power speakers.