Product description

Complete your car's sound system setup with the Hifonics Brutus Gamma Mono Super D Class Amplifier. This subwoofer amp delivers power efficiently and effectively to your subwoofers, speakers, and other output devices for crisp sound with minimal distortion and heat. Control your sound with this car audio amp. This 4,000-watt amplifier sports a mono-only operation. You also can customize your sound with this car audio amp's variable electronic crossover and electronic equalizer capabilities. Made for efficient power performance, this car audio mono amplifier is rated @ 1 ohms - 1 channel x 4,000 watts; @ 2 ohms - 1 channel x 2,200 watts; @ 4 ohms - 1 channel x 1,100 watts. This monoblock amp uses Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion. All connections are secure with this car subwoofer amplifier. This amp features nickel-plated connectors and a molded connection terminal that's angled for easy access to all power, ground, and speaker connections. Pump up the sound with the Hifonics Brutus Gamma Mono Amplifier.

• POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super D Class, 4,000-watt, mono car audio amplifier; Wired bass remote included
• OPERATION: Control your sound with mono only operation, variable electronic crossover, and electronic equalizer capabilities; Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
• OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion
• CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors; Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal
• POWER: Power ratings: @ 1 ohms - 1 channel x 4,000 watts; @ 2 ohms - 1 channel x 2,200 watts; @ 4 ohms - 1 channel x 1,100 watts; Dual coil Pulse Width Modulated power supply keeps voltage constant through Ultra-Fi output devices

User questions & answers

Question:	Is this really rated 2200 RMS at 2 ohm or is it peak
Answer:	I would call the color lavender
Question:	watts max or 4000 watts rms
Answer:	China

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Kick your Bass into high gear with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR3000D for a total power of 6,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR3000D. For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Specs - Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Will these amp power these subs? https://www.amazon.com/dp/b014oykx2w/ref=olp_product_details?_encoding=utf8&me
Answer:	Yes and yes
Question:	Will this amp push 4 Elux 15 vm audio
Answer:	each 12" 4 ohm sub would only get 75 watts of power, not a good turnstile for your system
Question:	how can i hook up a 0 gauge wire to this
Answer:	Thank you for your question. The crossover setting cannot be turned off and only goes up to 250 hz. Happy to help!
Question:	Quiero saber si este amp me funciona bien para un parlante kicker l7 de 15 pulgadas
Answer:	Thank you for your question. 150 RMS @ 4 ohms, 300 RMS @ 2 ohms. Happy to help! - Creative Audio

Product features

Performance Power

Ramp up your vehicle's Bass with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. With 3000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR3000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

This Hifonics BRUTUS Gamma BG Series Monoblock Super D Class Amp delivers a maximum of 2,200 watts for serious power for your car's subwoofer. The Super D Class design employs high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, this Super D Class amp has lower distortion, higher current efficiencies, and less heat than conventional D Class amp designs. Plus its Ultra-Fi MOSFET technology is designed for music production vs. just electronics output power. This produces very musical high power with high efficiency for cooling and minimal distortion. For serious power for your car's audio system, choose Hifonics' "Power from the Gods."

• 2,200 watts max
• 1,100 watts x 1 at 2 ohms
• 550 watts x 1 at 4 ohms
• Frequency response: 10 Hz to 500 Hz
• Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion

User questions & answers

Question:	Will this push 2 12 l7's
Answer:	The amp is monoblock, for one sub. I parallel wired them for me kickers
Question:	Everything is hook up right light up but no sound
Answer:	Just reorder the same one or a different one
Question:	Will this amp power (2) audio pipe txx-bdc2-12” inch subwoofers
Answer:	Yes, this does include a bass knob.
Question:	Will it power ((2(( 2000watts 15 inch subs with 0 gage wier
Answer:	i am running a TSW310D4 at 2 ohms and it is more then enough for it....love the amp does not get hot...great for one 12"...

Product description

• Capacitance Tolerance: + / - 10%
• Working Voltage Range: 16 VDC
• Surge: 24 V
• Chrome Plated Posts
• Mounting Brackets and Hardware Included
• Dimensions: 11-9 / 16" (H) x 3-15 / 16" (D)
• 1 Year Warranty

User questions & answers

Question:	What's this what 1 resistor ??? I've had capacitors before. Never heard of this
Answer:	Yes and love it. I used it with my 1600W Pioneer GM-D8601 amp. Note: It is a large size cap so make sure you have room to mount it close to the amp - best place to mount caps.
Question:	I have a kicker 2400 watt amp and two kicker comp 15s my lights are dimming and there killing my battery. Would this help with my problems
Answer:	11 inches tall 5 inches wide
Question:	Does this work on a 1200 watt amp
Answer:	You can do that and run it at 8 OHMs “or” Get 2 OHM dual voice coil and you’ll be at 600 at 4 OHMs. Sub can handle 600w at 4OHMs peak from your amp. Setting your gain properly is key( ac Volts w/ Multimeter ) Wire it as follows:1) incoming power to speaker (+) to your choice of coil on the sub and attach it the the + terminal.2.) Cut a wire to a length to reach from the Negative terminal (-) to the other Positive (+) terminal of the second coil. 3.) simply attach the second coils negative(-) ternimal to Negative(-) wire from amp .
Question:	Hi, For the 2 farad cap, can you please give the exact length of the widest part of the mounting bracket
Answer:	Yes, but a larger amp would be better because normally boss audio amps don’t actually peak at what they say

Product description

Complete your car's sound system setup with the Hifonics ZG-3200.1D Zeus Gamma 2400W Max Class D Monoblock Amplifier. This class D amp delivers power efficiently and effectively to your subwoofers, speakers, and other output devices for crisp sound with minimal distortion and heat. Made for efficient power performance, this car audio amplifier is rated for 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms. This 1-channel monoblock amp uses Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion. All connections are secure with this car subwoofer amplifier. This amp features nickel-plated connectors and a molded connection terminal that's angled for easy access to all power, ground, and speaker connections. No matter your audio setup, pump up your sound with the Hifonics Zeus Gamma Mono Amplifier.

• CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
• PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
• MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
• SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
• EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power

User questions & answers

Question:	Will this amp be ok for 4 12” kicker comp vrs
Answer:	I think so..maybe 3 but not 4...but you be surprise it Will probably push all 4...amp is very powerful
Question:	How much rms
Answer:	It has 1600 rms
Question:	Any overheating issues
Answer:	I have not had any over heating issues with this amp..but i did have some with the brutus 600w amp
Question:	Will this amp be ok for 3 12s. kicker comprt
Answer:	Yes it definitely will

Product description

Planet Audio MB600 2D 2 Channel Class D Car Amplifier - 600 Watts 2 Ohm Stable Digital Full Range Mosfet Power Supply Great for Speakers and Subwoofers

• Power - 300 Watts Max x 2 @2-Ohm Stereo 150 Watts Max x 2 @4-Ohm 600 Watts Max Bridged x 1 @4-Ohm
• Class D - Power loss is significantly reduced making the amplifier highly efficient Excess energy is stored until it’s needed instead of being converted into heat Reduction in size/weight reduced power waste smaller heat sink compact circuitry
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable High-Pass Crossover - Speakers reproduce sound based on high low or mid-range frequencies A variable high pass crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
• Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Does it come with the wires to connect it to the sub woofer
Answer:	This has to be plugged in to work. However there is a portable battery operated version that I have also. Works well and has the same functions

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Variable High Pass Filter

Variable high-pass filter gives you control over the frequencies that pass through to the full range speakers.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

Get the compact stability and great sound of the Planet Audio Pulse PL3000.1D Monoblock Class D  Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to give your music a boost. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Phase Control. Tweak the levels with the Remote Subwoofer Control. For double the performance and power, strap on another PL3000.1D for a total power of 6000 Watts @2-Ohms. When space is limited but your passion for great sound is not, Pulse Amplifiers with blue illuminated end panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing. Drive your tunes with the Planet Audio PL3000.1D.



For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	Will this amp blow my 2 10" rockville 2400w 1000rms
Answer:	The light is not blue. It is a traditional night light glow. More yellow. It. At also depend on if you put in a colored bulb.
Question:	Will this amp be good for 2 pioneer subs
Answer:	Buy buy baby or the skip hop website
Question:	I have 2 6.5s nemesis 500rms each. Does this will work
Answer:	Yes
Question:	Will this workon 2 VM audio 1500watt 10s
Answer:	The top most center button is the sound, the one right below it is the light.

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1 Ohm Stable

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic Filter

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Product description

Lanzar Model : VCT4110

 

2000 Watt 4 Channel High Power MOSFET Amplifier

• 500W x 4 Output at 4 Ohms
• 1000W x 2 Bridged Output at 2 Ohms
• 2 Ohm Stable
• MOSFET Power Supply
• Variable Hi-Pass:40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz
• Variable Input Level (Gain) Control : 6V-200mV
• Bass Boost Switch:0-18dB
• Thermal / Overload / Short Circuit Protection
• Soft Turn On/Off
• Power & Protection LED Indicator
• Low Level RCA Input : 10K Ohms
• Line Level RCA Output
• Frequency Response : 15 Hz-30K Hz
• Signal to Noise Ratio: >95dB
• THD:0.1 %
• 2x30 Amp Maxi Type Fuse
• Slim Size Amplifier Design For Easy Installation
• Dimensions: 10.63''W x1.78''H x 14.02''L

 

The 2000 Watt 4 Channel High Power MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	will this amplifier push my 1000 watt Kenwood
Answer:	This backpack measures 10"L x 2.5"W x 13.25"H and can accommodate a 13" laptop.
Question:	Will this amplifier power   2) kicker 10c124 12" 600w 4omh
Answer:	The dimensions are 14 "L x 10" W x 2.25 "H.
Question:	What's the rms watts per chanel at 2 ohms
Answer:	Fossil Leathers have a 1-year warranty from the date of purchase from an authorized retailer for manufacturing defects. A POP is required to honor the warranty for leathers/jewelry.
Question:	What this class amplifier (AB, B, C, D
Answer:	Fossil leather goods have a limited one year warranty that covers against defects in material or workmanship. To honor the warranty, your product should be sent to our service center for evaluation with a dated proof of purchase.

Product features

4-Channel High Power MOSFET Amplifier

• 500W x 4 Output at 4 Ohms
• 1000W x 2 Bridged Output at 2 Ohms
• 2 Ohm Stable
• MOSFET Power Supply
• Variable Hi-Pass:40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz
• Variable Input Level (Gain) Control : 6V-200mV
• Bass Boost Switch:0-18dB
• Thermal / Overload / Short Circuit Protection
• Soft Turn On/Off

• The R2-500X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 75 Watts x 4 @ 4Ω OR 155 Watts x 4 @ 2Ω OR 250 Watts x 2 @ 4Ω Bridged/Mono)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Can I run this as a 3 channel amp? 75w x 1 @ 4Ohm and 250w x 1 @ 4Ohm
Answer:	Yes, it’ll work great in 3 channel mode. Just be sure that you’re bridging into a single 4 ohm load. Feel free to send us a direct message or text/call our experts at 323-231-3525 with any questions
Question:	ohm stable
Answer:	Yes. It produces (conservatively) 250 watts RMS x 2 @ 2 ohms. Thanks for your interest in Rockford Fosgate!
Question:	Is this amp waterproof? Want it for a Polaris Slingshot
Answer:	No, the R2 series of amplifiers are not Element ready and should not be exposed to the elements. Here are our Element ready series of amplifiers: https://www.amazon.com/stores/page/BBFD70CE-A64C-417A-909C-76317E1A2400?ingress=2&visitId=e69d8aab-5221-4837-8268-78465b0496a6&ref_=ast_bln Thanks for your interest in Rockford Fosgate!
Question:	This amp states this on the information (250 watts x 2 @ 4ω bridged/mono). can connect to bridge/mono with 4ohm thats converted to 2ohm
Answer:	Yes, running 4 ohm bridged will be the same power as 2 ohm per channel. Thanks for your interest in Rockford Fosgate!

Product features

Primed For Performance!

The Prime R2-500X4 is a full-range class-D 4-channel amplifier, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono and rocking 500 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization.