10 best soundstream 5 channel amplifiers

Product description

Rubicon Nano 2000W Class D 5-CH Marine Amplifier. Military Grade SMT PCB Maintains Dynamic Performance. Direct Short, Thermal, & Overload Circuits Protect Amplifier. 200mV-6V Low Level RCA or High Level Signal Input. Quick Disconnect High Level Wire Harness Included. Easy DIY Install Single Sided Terminals & Controls. 4g Power In out Terminals & 12g Speaker Output Terminals. Variable 12dB High Pass, Low Pass, & Subsonic Crossovers. 12dB Bass Boost Increases Low Octave Harmonics.

• Rubicon Nano 2000W Class D 5-CH Marine amplifier
• High Efficiency Class D Full Range Amplifiers. 2-ohm Stereo & 4-ohm Bridged Class D Full Range
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 12dB Bass Boost Increases Low Octave Harmonics
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

User questions & answers

Question:	Would this power 8 6.5’s and one 10’ sub? So can you put 2 6.5’s on each of the 4 channels and run the sub on the 5th
Answer:	That's how I ran it
Question:	Can i use this for 4 12 in cutlass
Answer:	No, find a mono block amp and get more power
Question:	does it come with a corded sub controller level that plugs into the amp
Answer:	Yes it does. 4 ft foam cord with self adhesive 2 sided tape mount.
Question:	Is the sub channel 1 ohm stable
Answer:	No

Product description

640W 5-Channel Picasso Nano Class-D Amplifier

• PN5.640D - Soundstream 5-Channel 640W RMS Picasso Nano Series Class D Amplifier
• RMS Power Rating: 4 ohms: 60 watts x 4 chan. + 200 watts | 2 ohms: 80 watts x 4 chan. + 350 watts | 4 ohms Bridged: 160 watts x 2 chan. + 350 watts
• Full MOSFET PWM Power Supply
• SMD Technology on Double Sided PCB
• Dimensions: 4.75"W x 1.5"H x 10.3" L

User questions & answers

Question:	Can I input left right channels and have it split left right bridged and sub
Answer:	You don't need the remote if you use the speaker level input.
Question:	when using the speaker level inputs; does the 5th (sub) channel require an active input? my head unit doesn't have 5 speaker outputs
Answer:	It is ok, use it for lows and speakers for highs only. If you have a small truck it will do the trick. I plan on buying one more for my suv. For how easy it is to install it is worth it.
Question:	why do the pigtails have five wires each
Answer:	In short, yes it does. You can hook up to left/right speakers (high level input) or pre amp input and set the input switch accordingly. The one input terminal is used for either source. I'm using it on a motorcycle, works well. Good luck!
Question:	Made in korea? Or made in china
Answer:	You can but remember to change the fuse. If the fuse is #10 thing about #15 or #20.

Product description

Rubicon amplifiers are all new. We adopted the optimum class D performance, reliability, and footprint of the Picasso Nano platform and present to you Rubicon Nano. At first glance, you'll notice several key improvements. Rubicon Nano's signal inputs, power/ground, and speaker connections are all re-located to the leading edge of the chassis, for an easier, more appealing install. All pre-amp & crossover options are conveniently located on the top surface, making adjustment after installation possible. What you might not notice are additions to the circuit board, including increased power supply & output stage components, & monoblock bridging capability.

• High Efficiency Class D Full Range Amplifiers
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged Class D Full Range
• Monoblock Bridging Capability for Double Amplifier Application
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

User questions & answers

Question:	What are the rms wattage rating for all 5 channels? 2 ohm and 4 ohm? didn't see them listed
Answer:	4 ohms: 75 x 4 channels + 300 x 1(sub) 2 ohms: 100 x 4 channels + 500 x 1(sub)
Question:	Can this amplifier run 4subwoffers
Answer:	I wouldn't. It's only rated at 500 watts on the mono channel. I have it pushing an sa10 in my wife's car. Plus all four door speakers.
Question:	Does this sale come with a dash Mount gain control
Answer:	Yes it does come with it...
Question:	How many watts on the sub channel
Answer:	Wattage for the Sub channel is 300w 4 ohm & 500w 2 ohm.

Product description

5 Channel Nano Size Bass and Full range Amp w/ 320W Mono and 4 X 80W

• CAR AMPLIFIER: 5-channel car audio amplifier with 1,280 watts of max power and 640 watts RMS power; 10.25 inches long, 8.25 inches wide, and 2.75 inches tall
• HIGH POWER TECHNOLOGY: 60 watts x 4 RMS power handling at 4 ohms, 80 watts x 4 RMS at 2 ohms, and 80 watts x 4 RMS bridged at 4 ohms
• CLASS D MACHINE: Class D full range design and performance
• QUALITY, TESTED CONSTRUCTION: Features a MOSFET PWM power supply
• HIGH-LEVEL INPUT: High-level input; 200mv-6V low-level input sensitivity

User questions & answers

Question:	What comes in the box besides the amp?! Are there any harnesses that come with this item
Answer:	A separate bass knob is included
Question:	Hi, can I use the Subwooferchannel about 1 ohm
Answer:	My set is 2 8in Polk audio, however it probably can handle the 12’s if they’re bridged get some professional help on the install
Question:	Can I use or get a bass knob for diz amp or I dnt need one
Answer:	Channel 5 specs RMS: 4ohm-325 2ohm-500 1ohm-750
Question:	Well it push 2 12" vm audio subwoofers
Answer:	There are plenty of videos on You-tube which should be able to give you some information. I am not a doctor or medical professional, so this information is non-medical. With Similasan, the safety tip of the nozzle goes into the ear, and you spray. Rub the base of the ear for 10 seconds before draining out. Let me know if this helps. Best regards.
Question:	It says it's a 5 channel amp but only giving 4 channel power ratings. What exactly is the amp
Answer:	Better to consult a ear doctor (Otolaryngologist), because I understand that some quantity of Cerumen is necessary in the ear canal

Product description

Package for Soundstream AR4.1200D 4-Channel 1200W Class D Amplifier + 2 Sets SPL AS-60C 6.5" 200W RMS Gorilla Series Component Speakers System

• AR4.1200D Features: Power Handling: RMS Power @ 4Ω: 120 x 4 / RMS Power @ 2Ω: 150 x 2 / RMS Power @ 4Ω Bridged: 300 x 2. 2-ohm Stereo & 4-ohm Bridged Full Range Operation, Military Grade PCB w/ PWM MOSFET Power Supply, Direct Short, Thermal, & Overload Circuit Protection, High/Speaker Level & Low Level/RCA Input, 200mV-6V Low Level RCA Input, Pre-Amp Low-Level RCA Outputs (Select Models), 4g Power Wire & 8g Speaker Wire Outputs, Variable 12dB High & Low Pass Crossovers, 12dB Bass Boost Increases
• AS-60C Features: 6-1/2" Gorilla Series 2-Way Component System. Power Handling: Peak: 400 watts per pair / 200 watts each / RMS: 200 watts per pair / 100 watts each. Polypropylene Cone is less susceptive to moisture damage, Nitrile Butadiene Rubber (NBR) speaker surround, 1" Polymide flush mount Dome tweeter for high frequency reproduction, Nomex spider suspension keeps the cone linear during playback, High-temperature voice coil with Aluminum former, 30oz. magnet motor structure, Rubber magnet b

Product description

Picasso Series 5-Channel Class AB/D Car Amplifier. Variable Bass Boost (0 to +12 dB bass boost at 45 Hz). Variable high-pass filter. Variable low-pass filter. Subsonic filter (12 dB at 15 Hz).

• Picasso Series 5-Channel Class AB/D Car Amplifier
• RMS Power Rating: 4 ohms: 170 watts x 1 chan. / 2 ohms: 270 x 1 chan. / 4 ohm, Bridged: 270 watts x 1 chan.
• Max power output: 800 watts
• Pulse Width Modulated MOSFET power supply
• Heavy duty aluminum heat sink

Product description

New for 2017, Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried and true class A/B Full Range and improved efficiency Class D Monoblock platforms, Arachnid Amplifiers continue down the road of reliability and longevity you know well. Arachnid models include 4 Channel & Class D Monoblocks up to 8,000 Watts. Features: SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt Mono Amplifier 1-Ohm Class D Amp  4g Power Wire & 8g Speaker Wire Outputs Variable 12dB High & Low Pass Crossovers 12dB Bass Boost Increases Low Octave Harmonics 1800 Phase Shift Improves Low Octave Dynamics Dash Mount Remote Control Included Max Power (Watts): 8,000 RMS Power @ 4Ω: 1,500 x 1 RMS Power @ 2Ω: 2,500 x 1 RMS Power @ 1Ω: 4,000 x 1 Remote Gain Control: Included Low Pass Filter: 40-180Hz Bass Boost: 0-13dB Bass Boost Frequency: 30-80Hz Subsonic Filter: 10-50Hz Frequency Response: 20-190Hz S/N: 97dB Input Sensitivity: 0.2-6V THD: <1% Operation Voltage: 9-16V Dimensions: 8.50"W x 2"H

• SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt 1-Ohm Mono Amplifier
• SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt Mono Amplifier 1-Ohm Class D Amp . 1-ohm Stable Monoblock Operation for MAX Power. Bridge 2 Monoblocks Together for Double Power!. Military Grade PCB w/ PWM MOSFET Power Supply. Direct Short, Thermal, & Overload Circuit Protection. High/Speaker Level & Low Level/RCA Input. 200mV-6V Low Level RCA Input. Pre-Amp Low-Level RCA Outputs (Select Models).
• 4g Power Wire & 8g Speaker Wire Outputs. Variable 12dB High & Low Pass Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. 1800 Phase Shift Improves Low Octave Dynamics. Dash Mount Remote Control Included. Specifications:. Max Power (Watts): 8,000. RMS Power @ 4Ω: 1,500 x 1. RMS Power @ 2Ω: 2,500 x 1. RMS Power @ 1Ω: 4,000 x 1. Remote Gain Control: Included. Low Pass Filter: 40-180Hz. Bass Boost: 0-13dB.

User questions & answers

Question:	Will this amp push my orion hcca
Answer:	Perfect choice for this amplifier
Question:	Would this amp power my sundown x12 v.2 d2 2ohm subwoofer with no problem if not what amp would you recommend? Thanks
Answer:	Heck yeah I got them pushing 4 15s hDS3 in a Dodge Magnum
Question:	Will this be good for these speakers? soundstream t5.122 12"" dual 2 ohm tarantula series subwoofer
Answer:	Yes comes with input wires for Chanel’s
Question:	Would this amp push 4 lanzar max pro 15's
Answer:	1 ohm stable to the subs. 2 ohm on the stereo.

Product description

For those who want the most out their car audio system, quality sound processing is a must. After some slight adjustments, your system can sound like it has been tuned by audio professionals. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Equalizer. Commonly added in-line before subwoofer amplifiers, Bass Equalizers boost lower frequency harmonics that have been compressed or removed from today’s music recordings. Dial-in the exact sound you want by tuning the frequency to boost, then, increase the bandwidth range from that frequency to boost the harmonics around it. Unlock the best bass from any system with Bass Xtreme amplifiers.

• Digital Bass Reconstruction Processor Built-in
• Power Handling: 1, 800W Max
• RMS @ 4Ω Bridged: 400W x 2
• RMS @ 2Ω-14. 4V: 150W x 4
• RMS @ 4Ω-14. 4V: 200W x 4
• Adds Impact to Music w/ Insufficient Sub Bass
• 27Hz-63Hz Variable Center/Sweep Frequency

User questions & answers

Question:	Does it come with the high level input harnesses
Answer:	They are leather so they resist a bit, of heat, but they are by no means like a welder glove or even a standard insulated glove.
Question:	What kind of class is this amplifier ...ab, h or d
Answer:	Yes and no, the leather is resistant to the water, but after getting wet the leather starts to fall apart. Would not be my first choice
Question:	how many oms does this amplifier handle
Answer:	The gloves are not touch screen compatible.

Product description

Rubicon amplifiers are all new. We adopted the optimum class D performance, reliability, and footprint of the Picasso Nano platform and present to you Rubicon Nano. At first glance, you'll notice several key improvements. Rubicon Nano's signal inputs, power/ground, and speaker connections are all re-located to the leading edge of the chassis, for an easier, more appealing install. All pre-amp & crossover options are conveniently located on the top surface, making adjustment after installation possible. What you might not notice are additions to the circuit board, including increased power supply & output stage components, & monoblock bridging capability.

• Rubicon Nano 3000W Class D 1-Channel Amplifier
• RMS Power Range: 600Wx1@4-ohms / 900Wx1@2-ohms / Bridged: 1500Wx1@4-ohms
• Maximum Power: 3000 Watts
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation

User questions & answers

Question:	This amp is actually 1500 rms at 1 ohm, correct? i believe the rms ratings are wrong in the description. thanks
Answer:	Yes. But I advise you to order 2 sizes smaller than usual. I wear medium in all other Mechanix Wear gloves, but these mediums are extra large for me. Other than that, great gloves. I use them every day.
Question:	What amp will push a mofo 15inch 3000 watt
Answer:	These gloves are Velcro
Question:	Is this the correct image
Answer:	Well I don't know about the measurements you listed but I will say that the Medium size I purchased seemed a little small-not un comfortable . I wear a golf golve in Medium Cadet-which means shorter fingers and they fit me very well. I use my gloves for yard work and minor mechanical jobs. I am 70 but active - the thing that happens to me is my skin tears very easily so the gloves do a good job. They are fine for shooting hand guns and I shoot my 9 or 10 mm withing the 6" ring at 10 yards regularly wearing them. What I am saying in conclusion is I think they run a little small but that may actually contribute to a very good "feel" while wearing them. I hope this helps
Question:	Will this push my 15 evl skar 2500 watt
Answer:	gloves are very comfortable.... use in the summer shouldn't be a problem..... I still use mine

Product description

If you're in need of an amplifier that takes up little space but delivers a big sound, Soundstream's Stealth amplifiers can fill the bill. At about 3" deep by 7-1/2" wide, the ST4.1000D 4-channel amp will fit just about anywhere, delivering 90 watts per channel to your front and rear speakers, or up to 250 watts per channel in 2-channel mode to your subs. That's a lot of power in a tiny package.

• 90 watts RMS x 4 at 4 ohms (125 watts RMS x 4 at 2 ohms)
• 250 watts x 2 bridged at 4 ohms
• Mosfet power supply
• Preamp and speaker-level inputs
• Variable high- and low-pass filters (35-250 Hz, 12 dB/octave)

User questions & answers

Question:	Can this amp go behind the dash or does it get too hot
Answer:	Hello! This amplifier is class a/b.
Question:	Can only 2 channels be bridged for 2 speakers a 1 small subwoofer
Answer:	no these pictures show just the drill unit. I had batteries so I ordered these. The batteries are not included in this photo. If it does not say "batteries included" you would only receive the drill unit alone. You would need to buy the batteries separately. Be sure to check the size battery needed as there are different voltages for different drill units that all look alike. Hope this helps.
Question:	is there a way to get Bluetooth with this amp
Answer:	The models ending in -20 are typically tool only. -21 one battery, charger, and some kind of case. -22 two batteries........
Question:	Does this unit have the bluetooth
Answer:	You can use the new style 18v battery.
Question:	Do this work on Mazda
Answer:	It does but you have to buy the chisel.
Question:	I own a 2002 Yukon slt would it fit my truck
Answer:	I’d rent a Hilti.
Question:	will this fit in Buick Enclave
Answer:	Mine came with a soft case. I have seen them sold both ways. I would check the specs to see which is provided.
Question:	can i use this part for my 2011 mazda 3 i already disconnected the old amp
Answer:	Maybe , I have not try it

Product features

About Us

ACDelco is the premier supplier of GM Original Equipment (OE) automotive replacement parts, as well as a trusted provider of premium aftermarket parts for most other makes and models.

ACDelco provides high-quality parts for all major vehicle systems, as well as off-road, marine and industrial equipment. Our product portfolio includes maintenance parts such as car batteries, spark plugs, oil filters, air filters, wiper blades and brakes, as well as repair parts such as alternators, radiators, chassis and heating/cooling components.