11 best pac 5 channel amplifiers

Product description

Rockford Fosgate R600X5 Prime 600 Watts 5-Channel Amplifier MOSFET power supply & 4 Gauge power/ground connectors + Complete 5 Channels 2000W Gravity 4 Gauge Amplifier Installation Wiring Kit Rockford Fosgate R600X5 + 5 Channel 4 Gauge Amplifier Kit R600X5: 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm Accepts High Level & RCA Level Input & Cast aluminum heat sink with Top Mount Control 12dB/octave crossover. MOSFET power supply & 4 Gauge power/ground connectors Complete 5 Channels 2000W Gravity 4 Gauge Amplifier Installation Wiring Kit Rockford Fosgate R600X5 + 5 Channel 4 Gauge Amplifier Kit R600X5: 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm Accepts High Level & RCA Level Input & Cast aluminum heat sink with Top Mount Control 12dB/octave crossover. MOSFET power supply & 4 Gauge power/ground connectors Complete 5 Channels 2000W Gravity 4 Gauge Amplifier Installation Wiring Kit Rockford Fosgate R600X5 + 5 Channel 4 Gauge Amplifier Kit R600X5: 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm Accepts High Level & RCA Level Input & Cast aluminum heat sink with Top Mount Control 12dB/octave crossover. MOSFET power supply & 4 Gauge power/ground connectors Complete 5 Channels 2000W Gravity 4 Gauge Amplifier Installation Wiring Kit

• Rockford Fosgate R600X5 + 5 Channel 4 Gauge Amplifier Kit
• R600X5: 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm
• Accepts High Level & RCA Level Input & Cast aluminum heat sink with Top Mount Control
• 12dB/octave crossover. MOSFET power supply & 4 Gauge power/ground connectors
• Complete 5 Channels 2000W Gravity 4 Gauge Amplifier Installation Wiring Kit

Product description

Kenwood eXcelon XR901-5 Class D 5 Channel Amplifier



High Performance Parts

Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter, which is essential for achieving high resolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality.



Deep Bass Sound

By using a down-firing subwoofer and superior technologies, the audio system generates high-quality sound and powerful bass, while still being compact.



Enhanced Signal To Noise Ratio

The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio. As a result, the noise level has been reduced by up to 40%.



Wired Remote Control

The wired remote control allows you to adjust the volume of a subwoofer when connected to the head unit.



Feature List:



Operating Voltage: 14.4V (11 - 16 V allowable)

Current Consumption: 80 A

Dimensions (W x H x D): 260 x 51 x 169 mm (10-1/4 x 2 x 6-5/8)

Weight: 2.4 kg (5.2 lbs)

Warranty: 2-Year



Specifications:

Rated Power Output 14.4 V

60 W x 4 / 400W x 1 (4Ω) (20 Hz - 20 kHz, 1.0% THD) (20 Hz - 200 Hz, 1.0% THD)

75 W x 4 / 600W x 1 (2Ω) (1 kHz, 1.0% THD) (100 Hz, 1.0% THD)

Frequency Response

20-20kHz(±1dB)

Input Sensitivity

0.2 V - 5.0 V (MIN-MAX)

Input Impedance

10 kΩ

Signal to Noise Ratio

100 dB

Low Pass Filter Frequency (-24dB/oct)

50 Hz - 200 Hz (variable) Low-Pass Filter Frequency

High Pass Filter Frequency (-12 dB/oct.)

50 Hz - 200 Hz (variable) High-Pass Frequency

Dimensions (W x H x D)

260 x 51 x 169 mm (10-1/4 x 2 x 6-5/8)

• Wired Remote Included
• Hi-Res Audio
• High Performance Components

Product description

Alpine S-A55V 5-Channel 60W RMS X 4 + 300W RMS X 1 at 2-Ohm S-Series Amplifier

• Features: 5-channel car amplifier,

User questions & answers

Question:	Can anyone tell me, does a set of 6.5 speaker w/tweeter & crossover count as 2 or 4 channel
Answer:	Just the handle
Question:	what is the power output (RMS) at 8ohms
Answer:	I don’t see anything on these spatulas or the Amazon site to show where they’re made. They are well made and sturdy, with a few things I do not like-the edge isn’t as thin as it might be and I found this made flipping things over a problem- I had to lift the edge with a fork to get the spatula under it. I also don’t like the tip of the handle is very flexible and rubbery, whet I would prefer it to be more firm.

Product description

Rockford Fosgate R600X5 Prime Series 5-channel car amplifier -( 50 watts RMS x 4 at 4 ohms ) + 300 watts RMS x 1 at 2 ohms Amplifier + Completed Amp Kit + RCA's Rockford Fosgate performance in a rugged package – the Prime Series R600X5 5-channel amp can drive 4 speakers with 50 watts RMS each, while powering a subwoofer with up to 300 watts RMS. Not worried about your rear speakers? You can bridge the amp to 2-channel mode to drive a pair of high-performance components with 150 watts RMS each, while still sending that 300 watts to a sub. You can use the high- and low-pass filters and Rockford Fosgate's famous Punch boost to get maximum performance from your speakers and sub. And speaker-level inputs let you hook this amp up to almost any system, even a factory stereo. Rugged performance and value The R600X5's heavy cast-aluminum chassis efficiently draws damaging heat away from its internal components, ensuring reliable, long-term play. The amp's built-in sensors keep track of the output current and power supply temperature, ensuring that plunging impedances (they change constantly during play) or even a short circuit won't hurt anything. Your driver's seat will become your favorite place for listening to music once this Prime amp goes to work.

• Rockford Fosgate R600X5 Prime
• 5-channel car amplifier
• Completed Amp Kit
• variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
• variable low-pass filter, always engaged (50-250 Hz, 12 dB/octave)

User questions & answers

Question:	Is the amp kit that comes with this amp quality? Or should I pick up a different one
Answer:	This tool is built sturdy, not sure of actual weight but it will hold more than your wrist can hold, I hope that answers your question.
Question:	is the power and ground copper or cca
Answer:	It definitely sits flat. This is an industrial strength flipper you would use in a restaurant. If you're just going to be flipping pancakes and burgers in the kitchen I'd say get a lighter tool.
Question:	Well this handle a two ohm sub
Answer:	It is stamped on the metal by the handle 'made in China'. It is heavy duty as described and I would give it 5 stars for my personal opinion. It is a good value.
Question:	Does this amp come with the bass knob cuz the one I bought it didn't have it in the package
Answer:	For sure!!

Product description

Kenwood's Excelon Reference Series XR901-5 amp can power your entire audio system while taking up an astonishingly small amount of space — it's smaller than a 2" stack of computer paper. But this compact 5-channel workhorse will send 60 watts RMS to each of your front and rear speakers, along with up to 600 watts RMS to your sub. You could also use the XR901-5 in 3-channel mode to drive a pair of high-performance speakers or components with 150 watts RMS each, while still sending 600 watts RMS to a sub.

Product highlights:

• 5-channel amplifier
• 60 watts RMS x 4 + 400 watts RMS x 1 at 4 ohms
• 75 watts RMS x 4 + 600 watts RMS x 1 at 2 ohms
• 150 watts RMS x 2 bridged at 4 ohms + 600 watts RMS at 2 ohms
• CTA-2006 compliant
• Class-D amp design — frequency response: 20-40,000 Hz
• Variable low- and high-pass filters on front and rear channels (50-200 Hz, 12 dB/octave)
• Variable low-pass filter on subwoofer channel (50-200 Hz, 24 dB/octave)
• Wired remote volume control for sub channel
• Cooling fan
• Preamp inputs only
• Fuse rating: 40A x 3
• Wiring and hardware not included with amplifier
• 4-gauge power and ground leads recommended
• 10-1/4"W x 2"H x 7-3/16"D

 

What's in the box:

• 5-Channel amplifier
• Three 40-amp ATO fuses (installed)
• Remote Commander
• Flat washer
• Hex nut
• 20' Remote cable (RJ-14 modular plugs on each end)
• 4mm Allen wrench
• 2.5mm Allen wrench
• 4 Self-tapping screws (length 5/8")
• Instruction manual (English/ French/ Spanish)
• Warranty card

• High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
• Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter, which is essential for achieving highresolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality.
• By using a down-firing subwoofer and superior technologies, the audio system generates high-quality sound and powerful bass, while still being compact.
• The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio. As a result, the noise level has been reduced by up to 40%.
• The noise reduction system employs a special layout that separates the analog circuit, digital amplifier circuit and power supply circuit. This keeps interference between the circuits to a minimum, decreasing noise and thereby achieving high performance and sound quality.

User questions & answers

Question:	w x 4 / 600w x 1 (2ω) . if my set up is like this except 600w is 800w for the subs. i should be okay
Answer:	300 WATTS TOTAL 75x 4 150X2 OR 300 X!
Question:	Where would you set the input sensitivity for a 4v head unit
Answer:	I have this in my Street Glide and fits perfect in the fairing right on top of the stereo.
Question:	Is this a genuine, new Kenwood product
Answer:	No. This particular amp is not, but ken wood makes a similar amp that IS a marine amp
Question:	Can you bridge 1&2 and 3&4 at 4 ohms, and have the separate sub channel at 2 ohms for a total of 3 channels
Answer:	No the ‘fifth’ channel for the sub will output the same power no matter how much power the other channels are using, either hook it all up to this one amp or get two amps

Product description

Class D High Power 5 Channel Amplifier - Kenwood Car Audio X802-5 Kenwood as a brand has great heritage in car power amplifiers, some of you may recall some of the award winning power amplifiers in the 1990's - 2000's . We remember products such as the PS series those amplifiers would give tremendous power output with excellent sound quality. These days amplifiers needs have change quite a lot and we now need less power, cleaner sound and more compact solutions. One thing you will notice about the Kenwood X802-5 is just how compact the amplifier really is. The amplifier is beautifully constructed, being class D it is light weight as the power amplifier is very efficient at creating power. So less heat is generated and you have a more compact size in return. All inputs and outputs are covered by end caps giving protection. Sound Quality wise you will find the amplifier very dynamic, clean and punchy. Mid-range is very direct and focus and the high's are nice and linear. With the dedicated 300w rms mono channel (4 ohm) you can drive a fairly large subwoofer, with surprise this amplifier runs very cool and gives an impressive and powerful bass. We tested it with the In Phase XT-12 and it had no problem delivering clean accurate power bass with a lot of control. This amp is also 2 ohm stable, allowing more power to be delivered to the sub(s). Overall this is a great amplifier if you want to add that little bit of extra power with great sound quality.

• High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
• Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
• Detachable sliding terminal cover offers a sleek design and easier installation.
• All terminals and connections are on one side for easier installation and a cleaner look.
• Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

User questions & answers

Question:	how many calories are in Spark
Answer:	45 calories 11 carbs very healthy : )
Question:	did you lose weight
Answer:	AdvoCare Spark is not a dietary supplement that is designed to make you lose weight by itself. I used it in place of coffee in the morning and as a pre-workout energy boost. It does work well in those applications. It could assist in losing weight when used with a quality diet and exercise program.
Question:	How many servings does a 1 pound 6.2 oz container make
Answer:	Serving size can be found direct at https://www.advocare.com/130236955/Mobile/Store/ItemDetail.aspx?itemCode=A7093&id=TS Purchasing direct from manufacturer through an independent distributors micro site will ensure freshest batch that is guaranteed by the company. I believe it's also cheaper too :)
Question:	would like to see the ingredient list and does it have artificial sweeteners
Answer:	I am an Advocare independent distributor and Advocare prohibits the sale of their product on Amazon. Most of this product is old and even the pictures of most of the product is the old versions. If you want to get the product cheaper than these listing and to be factory fresh product. Then go to my official Advocare website and sign up to be a distributor You will receive 3 boxes of spark and 20 to 40 percent discount on all products. Not to mention you can also start selling it to make extra money. Just go to www.advocare.com/150757916 and click on the become a distributor link.

Product description

1800W peak (760W RMS) Club Series 5-channel amplifier

• 45 watts RMS x 4 + 320 watts x 1 @ 4 ohms
• 65 watts RMS x 4 @ 2 ohms + 500 watts x 1
• 130 watts RMS bridged x 2 @ 4 ohm
• Total peak power: 1800 watts
• Slim chassis provides more flexible mounting options

User questions & answers

Question:	Does anybody know if the center panel can be flipped? I need to mount the amp to a wall and need the wires coming in the top
Answer:	It’s compatible in any 2din slot. You just have to buy the adapter kit at any Walmart.
Question:	Is amp recommend for... 2 pair kicker component 6.75 300w(100rms) and one sub rw10ca 800w(200rms
Answer:	I had to buy the istalation kit as well as the stereo
Question:	Would this be enough to run jbl gto (2) 6x9 (2) 4x6 and
Answer:	IDK the answer, I purchased as a gift for this past Christmas. They haven't installed it yet. I did see that you can control them with an app from your phone, as long as you are somewhere with a signal. Sorry I couldn't be more help.
Question:	can i use it in my utv
Answer:	Yes it does!

Product description

Kicker CXA660.5 - 4x90W 4-Channel Full-Range Amp w/300W Class D Sub Channel - 46CXA6605T CX-SERIES AMPLIFIERS Affordable, flexible power w/ 1-Ohm stable mono models Horizontal and vertical mounting options FIT+ TM (Fail-safe Integration Tech-PLUS) accepts output from nearly any source Available remote level control (Mono and 5-Channel amps)

• Kicker - 46CXA6605t - CXA660.5 - 4x90-Watt 4-Channel Full-Range Amplifier w/300-watt Class D Sub Channel

Product description

Make your time on the water even more enjoyable with this razor marine Series class d amp from Power Acoustik. This 5-channel 2,500-Watt Max, 100w RMS x 4 + 400w RMS x 1 @ 4Ω amp uses a Compact 4.75" chassis design for installation versatility. The amp has splash-resistant conformal-coated circuit boards and MOSFET power supply with audiophile-grade irtm transistors. Military-grade smt PCB maintains Dynamic performance. Direct short, thermal & overload circuits protect the amp as well. This unit also has 200mv–6v low-level RCA inputs, high-level Input with auto turn on when it senses a signal, variable 12Db high-pass & low-pass crossovers and a 10hz–50hz variable 12Db subsonic Crossover protects subwoofers. Dimensions are 1.63"H x 4.75"W x 12.25"D.

• Class D amp
• Compact 4.75" chassis design for Installation versatility
• Splash-resistant conformal-coated circuit boards
• MOSFET power supply with audiophile-grade IRTM transistors

User questions & answers

Question:	How do i run all 5 channels with only 1 pair of rca's coming out of my bluetooth device
Answer:	Yes. Extremely high quality as little item.

Product description

Designed to withstand the elements, the R2-750X5 amplifier is an Element Ready 600 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.

• The M2-750X5 full-range 5-channel Element Ready Marine amplifier with 750 Watts RMS is packed with all the power and performance you’ve come to expect from Rockford Fosgate (Dimensions: 1.9" x 6.8" x 11.2")
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)
• Built for the marine environment, this Element Ready amp features UV resistant protection, conformal coated circuit board, stainless steel mounting hardware and marine grade terminal connections to ensure long lasting outdoor use
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Famous Rockford Fosgate build quality with a full 2-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Can I install 6 speakers at 2 ohms on 3 channels and bridge a subwoofer on a 5 channel amp
Answer:	I do not know what gauge the bowl is, but it is not at all flimsy. To me it is a nice weight and sturdiness.
Question:	Can you run 8 m1 6.5 speakers and a m1 10 inch sub on one amp? Or can you only run
Answer:	Stainless steel does not contain lead.
Question:	I have a jl audio 600/6 and it quite working can i still us the receiver i have with this unit
Answer:	Have the 4 and 6 quarts. The 4 does nest inside the 6. Not a complete answer to your question but hope it helps.

Product features

Serious Marine Sound, Made Simple.

Designed to withstand the elements, the M2-750X5 Element Ready 5-channel amplifier is a 750 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system.

The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.

The M2-750X5 amplifier is ideal for your marine or motorsports adventures, delivering an all-in-one system design driven by Rockford power!

Element Ready

The M2 Series amplifiers feature UV resistant protection and special internal conformal coating that protect the electronics from water. These amplifiers are Element Ready, protecting against Dust, UV, Corrosion, and feature Stainless hardware

What's in the Box

• M2 Element Ready Amplifier
• Mounting Hardware
• Allen Wrench
• Remote Level Control (allows you to tune the bass to your desired level)
• 4-pin Molex pig tail connectors

P.O.W.E.R. Supply

The Rockford Fosgate P.O.W.E.R. supply generates more power as voltage increases, all while reducing strain on the vehicles charging system, making this amp ideal for Marine and Motorsports vehicles

Product description

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview

Class-D Performance

PDX Technology Inside

Rotatable Illuminated Alpine Badge

Top-Side Control Panel

Voltage ON/OFF Sensing for OEM Upgrade

Built-in Crossover & Bass EQ

Remote Bass (RUX-KNOB) Compatible

Sound Quality

CEA-2006 Power Ratings

CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)

RMS Power Ratings

Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)

Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)

Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)

Sound Tuning

Crossover Frequency (CH1/2/3/4, HPF): 50 Hz - 400 Hz, -12 dB/oct.

Crossover Frequency (Subwoofer, LPF): 50 Hz - 400 Hz, -24 dB/oct.

Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)

BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)

Dimensions

Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm

Foot Print (WxHxD) in: 10-3/4" x 2" x 6-1/2"

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz - 45k Hz

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz - 400 Hz

THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %

THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %

Damping Factor for CH-1/2/3/4: >500

Damping Factor for Subwoofer: >1000

Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB

Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB

Weight: 2.76 kg/6lb 1.4oz

Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 - 4.0 V

Input Sensitivity (RCA Input, Subwoofer): 0.1 - 4.0 V

• PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
• Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
• Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
• All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
• PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally

User questions & answers

Question:	Will this power 2 5-way pioneer 6x9,2-8'mid-bass n 2 8- kicker flat subs. If not please help me
Answer:	This comforter is puffy; upon opening the package just fluff a bit.
Question:	Is Amazon part of Alpine's authorized dealer network
Answer:	This is light weight
Question:	Does this come with the bass knob? Listing seems to infer that
Answer:	Amazon doesn’t give the dimension for this one. I don’t see.
Question:	Can i bridge this to be a 3 channel amp? 2 channels plus the sub for the 3rd channel
Answer:	I have never had a problem with feathers coming out of the comforter.