10 best mtx amplifiers

MTX amplifiers are a popular brand of car audio amplifiers known for their high-quality sound reinforcement and power output capabilities. These amplifiers are designed for car audio enthusiasts and professionals who want to enhance their vehicle's audio system. Here are some key points about MTX amplifiers:

Multichannel Amplifiers: MTX offers a range of multichannel amplifiers, typically ranging from 2 channels to 5 channels or more. Multichannel amplifiers are versatile and can power multiple speakers or channels in a car audio system, including subwoofers, speakers, and tweeters.
Power Output: MTX amplifiers are known for their powerful output capabilities, allowing users to achieve loud and clear audio in their vehicles. Power ratings vary between amplifier models, and users can choose the one that best suits their needs.
Class-D Amplifiers: Many MTX amplifiers use Class-D amplifier technology. Class-D amplifiers are known for their efficiency, making them ideal for car audio applications. They generate less heat and draw less power from the vehicle's electrical system compared to traditional Class-AB amplifiers.
Bridgeable: Some MTX amplifiers are bridgeable, meaning they can be used to power a single high-powered channel or subwoofer. This flexibility allows users to adapt their amplifiers to different speaker configurations.
Variable Crossovers and EQ: MTX amplifiers often come equipped with adjustable crossovers and equalization settings.This allows users to fine-tune the audio output to match their preferences and the characteristics of their car audio system.
Protection Circuitry: MTX amplifiers typically include protection features to safeguard against overheating, short circuits, and other potential issues. These protection circuits help prolong the lifespan of the amplifier and prevent damage to the speakers.
Size and Form Factor: MTX amplifiers come in various sizes and form factors to accommodate different installation needs and space constraints within the vehicle.
Wiring and Connectivity: MTX amplifiers are designed to be compatible with standard car audio wiring and can be integrated into existing car audio setups with ease.
Brand Reputation: MTX is well-regarded in the car audio community for its commitment to producing reliable and high-performance amplifiers. They have a strong presence in the car audio aftermarket.

It's important for individuals considering MTX amplifiers to carefully assess their specific audio system requirements, such as the number of channels needed, power requirements, and compatibility with existing components. This will help them select the right MTX amplifier to enhance their car audio experience.

Below you can find our editor's choice of the best mtx amplifiers on the market

MTX Audio THUNDER500.1 Thunder Series Car Amplifier

MTX

Based on 153 reviews Check latest price

Product description

Get the most out of your entire car audio system with a small footprint amplifier that packs a big punch the MTX 500 Watt Mono D Bass Amplifier. This high quality MTX amplifier is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts of peak power and 500 watts RMS in an incredibly small package. This monster amp features a high efficiency, class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long. To top it all off, this unit was designed to be installed in almost any vehicle thanks to its small chassis size.

Class D Topology
Variable LPF
Selectable Bass Boost
Small Foot Print Design
Surface Mount PCB

User questions & answers

Question:	I have the mtx 12 in terminator subs and this amp, but I'm not sure what cords I need to get
Answer:	If your speakers are 4ohm speakers then hook up one speaker to each channel. And place wherever it won't matter. If your speakers are 8 ohm speakers like mine are wire two speakers to a channel. In my application I wired two speakers to channel 1, and two to channel 2 placed the speakers and sound good.
Question:	Will this work with my 2 mtx 7500 series 15's
Answer:	There should be a yellow RCA cord and a reverse wire that is located on the back of the stereo and a red (RCA STYLE) jack/cord attached to the camera. The yellow RCA cord needs to be attached to the yellow RCA jack on the camera (simple). The red (RCA STYLE) jack/cord AND reverse wire both need to be connected to a +12v wire that ONLY provides power when the vehicle is in reverse (example. reverse light). The left over black wire to the camera needs to be connected to chassis ground. NOTE the yellow RCA cord has a red lead on the beginning and the end that can be used to transfer power to the camera but, is NOT needed if utilizing the reverse light for power or CAN be used to eliminate the need to run both RCA and reverse (behind stereo) wire by connecting the reverse wire (behind stereo) to the red lead on the RCA cord. For someone who isn't an car audio installer this can be a bit confusing. Basically the stereo needs a wire to communicate the need to switch the screen display from default to camera feed (reverse signal wire) and the camera needs power (red and black wires) and a way to transfer information to the stereo (Yellow RCA cord).
Question:	We just got this hooked up and it's drawing .03 amps when it's off is anyone else having this problem
Answer:	Yes, it does.
Question:	Was just wondering if anyone knew if this sub would work well to push the mtx terminators
Answer:	No special card is need and you cannot use google maps

MTX Audio JH15001 Jackhammer Series 1500W Monoblock Class-D Car Audio Amplifier

MTX

Based on 9 reviews Check latest price

Product description

1500W Monoblock Class-D Car Audio Amplifier

1500W Monoblock Class-D Amplifier
4 Ohm: 650 watts x 1 ch. | 2 Ohm: 1100 watts x 1 ch. | 1 Ohm: 1650 watts x 1 ch.
Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
Includes Remote Bass Knob

User questions & answers

Question:	what is the peak power on this amp
Answer:	This product need to be connected manually for the first time, then it will automatically connect as long as the Bluetooth on the phone was turned on.
Question:	Would 2 mtx audio 7512 work ok
Answer:	Definitely Yes to both.
Question:	hello, everybody; any idea of dimensions
Answer:	Motion Man is incorrect. You can see in the photo, as expected, since this is for a MARINE installation, that you need 12V (car/boat battery) connected to it. You CANNOT plug this into 120vac outlet!!!
Question:	Will this amp push 2 12 MTX 9500 subwoofers
Answer:	The sound is good but in my opinion the volume is not loud enough for a party

MTX Audio TNP212DV Dual 12%22 Subwoofer Vented Enclosure with Amplifier, Black & PAC SNI-35 Variable LOC Line Out Converter

Check latest price

Product description

MTX Audio TNP212DV Dual 12" Subwoofer Vented Enclosure with Amplifier, Black

The MTX Terminator TNP212DV is an excellent all-in-one solution for anyone looking to add bass to their vehicle's audio system. The subwoofer enclosure can handle up to 1000-watts RMS and is designed to deliver all the bass you could ever need. Everything you need for a great bass system is in this package except wire! The TNP212DV utilizes the TNE212DV vented dual 12" enclosure, which combines great subwoofer design with perfect vented enclosure design to outperform everything in its class. Each 12" subwoofer can handle 500-watts RMS power, 1000-watts RMS for the entire enclosure. The subwoofers are wired internally at 2Ω matching it perfectly to the included TNA500D amplifier. The enclosure itself is made using extra-strength 5/8" MDF (medium density fiberboard), which is the preferred material for subwoofer enclosures, ensuring the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problem. The enclosure is wrapped in black aircraft grade carpet. The classic black goes well with any interior and is resilient to tearing and wear. The embroidered Terminator logo adds a custom look. For over 40 years MTX Audio has been making car audio electronics designed to deliver more than expected and that is exactly what this package delivers. Backed by a two-year warranty and 40 years of MTX history and expertise in crafting high quality car audio, the TNE212DV is the perfect solution for enthusiasts on a budget.

PAC SNI-35 Variable LOC Line Out Converter

The SNI-35 Adjustable 2-Channel Line-Out Converter from PAC Audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system. It allows 50 watts maximum input per channel and has a linear 20Hz to 20,000Hz output based on input signal. The transformer isolated for optimal sound and performance. The unit maintains correct phasing and works with most factory-installed radios.

Product 1: The included 500-watt RMS class D amplifier delivers ideal power to the enclosure.
Product 1: Dual 12" vented subwoofer enclosure designed for use in almost any vehicle.
Product 1: The enclosure is constructed using 5/8" MDF and aviation Carpet for durable and long lasting performance.
Product 1: Add a source and wires and you have the perfect subwoofer starter kit.
Product 2: Adjustable Line Output Converter
Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input
Product 2: Utilize Audio Transformer for Noise Isolation
Product 2: Phase Adjusted

User questions & answers

Question:	What connectors at the box? Raw wire, rca, banana
Answer:	yes

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK

Rockford Fosgate

Based on 2 reviews Check latest price

Product description

Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.

300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
Cast Aluminum Heatsink with Stealth top mounted control panel
Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

User questions & answers

Question:	Does the R500x1D come with the remote or is it sold separately
Answer:	It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now
Question:	Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit
Answer:	I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too.
Question:	Does this amp have an auto turn on feature so I dont have to wire up a remote turn on
Answer:	Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit.
Question:	is this amp 4 or 8 awg power and ground
Answer:	It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7!

Product features

Prime 500 Watt Class-D Mono Amplifier

The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.

MTX TNP112D Car Amplifier

Check latest price

Product description

Terminator TNA201 mono amplifier: 100 watts RMS x 1 at 4 ohms (200 watts RMS x 1 at 2 ohms) variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable bass boost (0-18 dB boost at 40 Hz) preamp- and speaker-level inputs fuse rating: 20A x 1 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier 11-3/4"W x 2"H x 10-1/2"D

Terminator Series Class D Monoblock Car Amplifier
Replacement Amp for TNP112D Systems - Comes in plain white box - No manual or spec sheet included
400 Watts Peak x 1, 120 Watts RMS x 1 @ 4 Ohms, 200 Watts RMS x1 @ 2 Ohms
Both RCA and High-Level Inputs w signal sensing for automatic turn-on
Variable low and high pass filters / Preamp RCA outputs to daisy chain multiple amps

MTX Dual 12" Subwoofers and Amplifier Package w/Wiring Kit & 2 Farad Capacitor

MTX

Check latest price

Product description

If you're looking to beat out your friends, then the MTX 12-inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub-enclosure and a car amp. With 2000 max power, it gives off super-deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. The AKS8 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20-foot 8-gauge red power cable, competition high quality fuse holder, 3-feet of 8-gauge black ground cable, 16-feet of 18-gauge blue turn-on wire, a 20-foot high performance RCA interconnect, 30-feet of speaker wire, 6-feet of split loom tubing, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16-inch ring terminal, and a 1/4-inch ring terminal. The Boss CPBL2 2-Farad Car Audio Capacitor has an equivalent series resistant of 0.00195 Ohms at 120 Hz and 25 degrees C. This capacitor has a low level input voltage of 20 volts and a high input voltage of 24 volts. This is a remote terminal screw-in capacitor that measures 10.3 x 3 x 3 inches. Get more performance out of your car audio with this complete kit.

MTX 12-inch 2000 watt dual bass package
Loaded enclosure
Dual 12-inch vented enclosure with a single terminal cup
2,000 watt of max power, 1,000 watts RMS
Vented design is tuned for harder-hitting base

SuperATV MTX MUD100-4 Class D UTV Amplifier | 400-WATT RMS 4-Channel POWERSPORTS Amplifier | Bridgeable | Most Compact Amplifier That MTX has Ever Made!

Check latest price

Product description

FITMENT:

Universal Mount Amplifier

FEATURES:

Four-channel amplifier
Class D topology
100 watts of RMS per channel
Conformal Coated Circuit Board - Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
Compact Design - The small footprint chassis allows for installation in space challenged vehicles

Pump Up the Power

If you want to blast your tunes so you can hear them when the pedal’s down and the engine is thrumming, you need an MTX MUD100-4 UTV Amplifier. This class D amplifier includes four channels that deliver 100 watts of RMS power per channel—that’s more than enough power to drive an entire speaker system. If you want a quality amp at the center of your side-by-side’s sound system, look no further.

Built for Action

This MTX amplifier is made for off-road use. It’s weather resistant and uses a conformal-coated circuit board and control cover to protect it from moisture and dust. The compact size lets you mount it just about anywhere on any vehicle. It’s built for action, and it’ll make your sounds slap.

✔️【Compact & Powerful】Features Full Range Class D Topology That Delivers Exceptional Sound Quality And Excellent Thermal Efficiency. The Unit Includes 4 Channels That Are Capable Of Delivering 100 Watts Of Rms Power Per Channel. More Than Enough Power To Drive An Entire Speaker System.
【Multiple Applications】The Compact Nature Of The Amplifier And Its Excellent Efficiency Make It Ideal For A Variety Of Applications Including Utv'S And Motorcycles. The Amplifier Footprint Fits On Most Oem Motorcycle Radios And Its Resistance To Radio Frequency Interference Make It The Perfect Choice For Upgrading The Stereo On Any Motorcycle.
💥【Rugged】The Entire Unit Is Weather Resistant Including A Conformal Coated Circuit Board And Control Covers That Prevent Damage From Moisture Intrusion. The Unique Design Includes A Pigtail That Contains All Of The Wiring Necessary To Connect Power, Ground, And Signal Without Having To Make A Connection Directly At The Amplifier.
【Installation Options】The Four Channels And Full Range Capability Enable The Mud100.4 To Drive Full Range Speakers And Subwoofers. The Unit Is Bridgeable So Four Channel Of 100-Watts Rms Power Can Become Two Channels Of 200-Watts Rms Power Enabling More Power To Be Driven To Large Cage Mount Or Saddlebag Lid Speakers So You Know You Will Hear Your Music At Any Speed.
【Specifications】6.52" Height, 1.86" Depth, 5.51" Width | Conformal Coated Circuit Board | Crossover = Fixed Hpf/Lpf @ 80Hz, 12Db/Oct (Allows Connection To Both Speaker And Rca Input Signals) | Max Sensitivity = 200Mv | Topology = Full Range Class D | Frequency Response = 10Hz - 32Khz

MTX Audio WET75.2 200W RMS 2-Channel Class A/B Marine Amplifier

MTX

Based on 3 reviews Check latest price

Product description

Marine Audio describes audio components that are utilized in environmental conditions where water, humidity, or element exposure is prevalent. These tough MTX Audio products work great mounted in boats and pleasure craft as well as off road vehicles and toy haulers.

Small Chassis
Conformal Coated Circuit Board
Surface Mount Technology

MTX Audio JH3004 Jackhammer Series 300W 4-Channel Class-AB Car Audio Amplifier

MTX

Check latest price

Product description

300W 4-Channel Class-AB Car Audio Amplifier

300W 4-Channel Class-AB Amplifier
4 Ohm: 60 watts x 4 ch. | 2 Ohm: 90 watts x 4 ch. | 4 Ohm Bridged: 180 watts x 2 ch.
Frequency Response: 20Hz - 20,000Hz
High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct

MTX Audio TH90.2 TH Series Car Amplifier

Based on 3 reviews Check latest price

Product description

The TH Series amplifiers are the latest version of Thunder that are designed to exceed your expectation for how an amplifier should perform. Featuring anodized aluminum top covers and subtle MTX badging, these amplifiers incorporate high end materials with convection cooling functionality. Each TH Series amplifier is designed to perform to the highest standard and has undergone rigorous quality testing to ensure this standard is met. Three class D mono blocks and two class A/B multi channel amplifiers offer every car audio enthusiast a solution that fits their needs.