• Digital Amplifier Technology
• Speaker Level Input w/ Signal Sensing Turn-on
• 2 Ohms Load Capability
• Power MOS-FET Switching Power Supply
• 1m (3.3ft) RCA Cable

User questions & answers

Question:	Is this amplifier waterproof
Answer:	This is a loaded question do to many people having different opinions about it. Some say the more strands allow for easier flow and less voltage drop when power consumption goes up. There are opinions all over about this topic, so I will give you what I have. I ran both positive and negative 10 awg automotive type wire, running my tower with 4 6x9 speakers and it all works just perfect. Wire run length was 17ft. The bluetooth works well but range is just about 5ft in my application.
Question:	Does it come with a volume control knob
Answer:	Hi, yes you can connect your mobile phone using Bluetooth. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRA430BT for more details. Thank you.
Question:	Anyone try installing in a 2013-2015 Dodge Dart
Answer:	Yes but it’s a POS
Question:	Would I need an amp wiring kit
Answer:	I've used these amps several times. If your referring to subwoofers, you can run a low-pass filter. Using the smaller 4 channel version of this amp, I run two 6.5" speakers from channel 1 and 2, and bridge the 3rd and 4th channels to run through a low pass filter to a subwoofer. Sounds good.

Product features

Kenwood KAC-M1814 - Power your speakers on land or sea

Kenwood's super-compact KAC-M1814 will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. This marine-rated 4-channel amp will pump up your audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos or marine receivers. The amp uses plastic covers to protect its connections and features a conformal-coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness.

Plastic covered connector

Plastic covered connector helps to keep out water and dust.

Conformal Coating

Conformal Coating provides vibration resistance and helps prevent the PCB from rusting.

Circuits

Pre-amp and Power-amp sections are separated to reduce radiation noise.

Product description

This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool – it’s completely waterproof. This 4channel, 400watt marine amp takes both high and low level inputs, so it’s compatible with a variety of head units and sources. Remote turn/on off makes controlling this amp a breeze. Gold plated RCA inputs means this amp won’t be a weak link in your setup. For protection, count on the heavy duty aluminum alloy heatsink to prevent overheating, as well as thermal, overload, and short circuit protection. Comes complete with mounting screws and hardware. Runs on 12 volts DC.

• Premium 4 Channel Amplifier: Pyle’s PLMRA400 is engineered as a 4 channel marine amplifier that allows high quality stereo reproduction from source; This will power up your speaker and Universally compatible with a variety of head units
• RCA Sterro Input: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs; If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level terminal inputs
• Short Protection: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator; These are to protect the amp and Your vehicle's electrical system from short circuit conditions
• Powerful 400 WATT: This amplifier is Powerful with its 100 WATT x 4 max or 400 WATT and dual Mofset power supply comes with dual adjustable input gain level controls between 1 300mV and 4 or 8 Ohm speaker impedance
• Marine Grade: With its marine rating of IP 01, it is waterproof ready It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
• Note: Ensure that the power source is the correct voltage/amperage, also check the wiring and speaker load

User questions & answers

Question:	Is this amp Bridgeable
Answer:	Any amp is bridgeable
Question:	Product Dimensions 120 x 94.4 x 24 inches......so this amp is 2 feet wide huh? Anyone have the actual product dimensions
Answer:	120 inches is 10 FEET long as well, think Amazon messed up ? LOL I just measured this amp - The actual "foot print" of this amp is 9 7/8 X 7 7/8 11 inches long with the terminals and a height of 2"
Question:	I want to hook up this amp to a 120v AC to 12v DC Converter. What Watt rating should it have? 30 Watt or 60 Watt or 100Watt
Answer:	14.4V x 25A (fuse on the amp) = 360W, So if you use a 12V converter you need 20 to 30 amps. You need a much bigger converter
Question:	Hello. What is the RMS (total and per channel) of this unit
Answer:	I checked the box and I was unable to find RMS. I assume Pyle would rather not disclose this. It's 100 per channel peak but I'd put it at 20-40 for rms

Product description

The RXM-S30 is a marine amplifier that is perfect for many applications. This amplifier is water resistant so you can use it in a car or boat or any other application! The micro size of the amplifier also allows for installation in tight spots.   The RSM-S30 is a 4 channel amplifier with 2,400 Watts peak output, 400 Watts CEA-2006 rated RMS power (4 x 90 @ 4 Ohms). You can also bridge the amplifier and get 2 x 600 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

• Rockville RXM-S30 2400 Watt 4 Channel Proton Micro Marine Car Amplifier.
• CEA Compliant Power Ratings: 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD.
• RMS Power Ratings: 800 Watts (4 x 200 Watts RMS) @ 4 ohms. 1200 Watts (4 x 300 Watts RMS) @ 2 ohms. 1200 Watts (2 x 600 Watts RMS) @ 4 ohm Bridged.
• Peak Power: 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms). Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors.
• Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB. Current drawn @ MAX RMS output: 27A @ 4ohm,  40A @ 2ohm.
• Efficiency @ MAX RMS output: 65% @ 4ohm, 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Input sensitivity: 20mV-6V. Mute and Delay Soft Start System.
• Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals.

User questions & answers

Question:	If I mount this amp inside a cabinet on my boat should I install a fan to keep the amp cool
Answer:	There’s no IP rating for water resistance, so if you drop it in the tub, be prepared to pay for a new phone. It's still a great phone though.
Question:	There are no mounting holes. What is the best way to mount it
Answer:	No
Question:	does this have a wiring harness ??? putting this in a defender max Can Am
Answer:	be carefull ,cricket its a mess at the moment,i mean its crazy only a few phones are compatible with cricket,i am a cell phone store owner and is a pain in the *** ...phone works for a few minutes then BOOM accoiunt is suspended...
Question:	Can I use this on a motorcycle
Answer:	Yes

Product features

Rockville RXM-S30 Micro Marine/ATV Amplifier 2400w Peak 4 Channel 4x150/CEA Rate

The RSM-S30 is a 4 channel amplifier with 2,400 Watts peak output, 400 Watts CEA-2006 rated RMS power (4 x 90 @ 4 Ohms). You can also bridge the amplifier and get 2 x 600 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market.

Features

Product description

Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.

• 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
• Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
• On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
• Cast Aluminum Heatsink with Stealth top mounted control panel
• Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

User questions & answers

Question:	Does the R500x1D come with the remote or is it sold separately
Answer:	It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now
Question:	Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit
Answer:	I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too.
Question:	Does this amp have an auto turn on feature so I dont have to wire up a remote turn on
Answer:	Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit.
Question:	is this amp 4 or 8 awg power and ground
Answer:	It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7!

Product features

Prime 500 Watt Class-D Mono Amplifier

The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.

Product description

Dual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7"H x 12"W x 10.9"D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.

• 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
• PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
• SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
• POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
• MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
• Waterproof four-channel, bridgeable MOSFET power amplifier with 4 x 250 Watts maximum output
• Variable high- and low-pass filters with crossover mode selector

User questions & answers

Question:	Can you tune every channel or does it tune both channels in the bridgeable channels
Answer:	Yes just press FN+ESC To switch modes/turn off.
Question:	Does this 1000 watt unit comes with 4 RCA plugs, to plug a radio/tuner into this amp
Answer:	K1 pink has 7 colors backlight: blue, red, green, pink, cyan, yellow and white. If the product you received is defective, please contact us to solve your problems and we would like to send you a replacement or refund.
Question:	Can I push 6 speakers and a 8" subwoofer with this amp
Answer:	It depends on the color of the product you choose. K1 white / K1 black stays rainbow color. K1 pink has 7 colors backlight ( not rainbow), and pressing Fn + tab can change it to solid color.
Question:	Is this amp good for a 2 ohm load when bridged
Answer:	Hold down the FN key then hit the ESC key to cycle through the options. There’s 4 bright, dim, pulse, and off

Product description

The DBM12 is a class D mono-block high power amplifier with 2, 000 watts peak output, 1, 000 watts RMS output, and 500 watts CEA-2006 rated power. All of the mono amplifiers in the dB Series are 2 ohm stable. 2 ohm stable is perfect for marine applications because most marine subwoofers are 4 ohm. This amp matches up perfectly if you have or subs that are each 4 ohm. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in marine audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide.

• Rockville DBM12 2000 Watt class-d mono 2-ohm Marine amplifier with terminal covers and bass remote
• Rockville DBM12 2000 Watt class-d mono 2-ohm Marine amplifier with terminal covers and bass remote. Cea Compliant Power Ratings:. 2 Ohm: 500 Watts x 1 Channel. 4 Ohm: 300 Watts x 1 Channel.
• Fully adjustable 12Db/ Octave Crossover with differential circuitry. Adjustable low Pass filter: 50Hz - 250Hz. Adjustable subsonic filter: 15Hz - 55Hz.
• Painted conformal coating PCB board (uses 2577 waterproof glue). waterproof silicone covers for end panels. Rustproof aluminum heatsink with white painted finish.
• Optical Coupler Class “D” Technology. Phase control switch. Mute and delay soft start system. Rca preamp Line Output. Rca input. 8 volt Preamp Circuitry.

User questions & answers

Question:	Can i connect 4 6.5” speakers for a sxs with this
Answer:	No.Any 9v center negative adapter will work. It also does not take batteries.
Question:	Is this amp bridgable
Answer:	This is a 9V pedal.
Question:	Is this amp bridgeable
Answer:	Hello,Yes, you can use it for the guitar - here is a link to hear what it sounds like https://www.youtube.com/watch?v=pfQINLB8eVw
Question:	I have a pair of rockville W65K9 6.5" 2ohm dvc 1000watt subs would this amp be a good match
Answer:	To my ears, the harmonics knob enhances the attack on a fingered note, and is more pronounced with a pick, and is most notable when slapping and plucking. The effect is more noticeable on the higher notes and strings than on the lowest. A lot more subtle than rolling off the tone knob on your bass.

Product features

Rockville dBM12 2000 Watt Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, all of the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

The dBM12 is a mono amplifier with 2,000 watts peak output and 500 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a marine amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. The dBM12 features a Maxi fuse with a rating of 60 Amps. Although we rate these conservatively at 500 watts CEA @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dBM12 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The dB marine amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even more dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Product description

Skar Audio engineered the RP-800. 1DM marine amplifier to be unrivaled in both performance and reliability compared to anything else on the marine market its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-800. 1DM. The RP-800. 1DM is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced, marine grade, PCB board layout. Conservatively rated at 800 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 1, 200 watts at max power output, this amplifier is great for powering the sub stage on your boat/UTV. Furthermore, the oversized 4-gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, +6, +12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter. In addition to all the above features, this model also features 4-way protection circuitry, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, overheating, low voltage, and more. Our marine amplifiers feature a special marine coating internally that allow them to withstand the harshest conditions for long lasting use. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from anywhere on the watercraft.

• Marine Class D MOSFET Monoblock Power Amplifier
• Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
• Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
• Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
• Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
• Stable at 1 ohm | Remote Subwoofer Level Control Included
• Highly Efficient Heatsink Design allows for Maximum Reliability & Performance

User questions & answers

Question:	will this amp be good for 2 p2d4 rockford fosgat wired at 1ohm ? or should i get rp
Answer:	I’d say yes it would be. I have 4-195w/4ohm 6.5 kickers and I have the amp turned way down. But it sounds great!
Question:	How many channels are on the 800 watt amp? I want to run 4 50 watt speakers and 2 195 watt tower speakers. Is this amp sufficient
Answer:	If you are asking this question, then you need to find a professional for installation help, most likely. You can put this in any vehicle, atv, plane, etc. that has a 12v source, or some method of power transformation to get 12v. We installed it in a compartment of a golf cart and it is doing well.
Question:	Could i run this kicker sub (https://www.amazon.com/gp/product/b01blw617q/ref=ox_sc_act_title_1?smid=a2ktlujejbw8gs&psc=1) with this amp just fine
Answer:	yes
Question:	Can I run 2 10s w this amp
Answer:	yes its a water resistant amp ive had it on my boat 2 yrs

Product description

Pyle Model : PLMRMP1B

Waterproof Marine 2-Ch. Amplifier

2 Channel 400 Watt Waterproof Micro Marine Amplifier

• 2 x 100 Watts RMS at 4 Ohms
• 2 x 200 Watts Max at 4 Ohms
• 2 x 300 Watts RMS at 2 Ohms
• Stereo to RCA Adapter
• Fuse: 10A
• RCA Line Input
• T.H.D: <0.05%
• Soft Turn On/Off
• S/N Ratio: >95dB
• Anti-Thump Turn-On
• 2 Ohms Stereo Stable
• Power Protection Circuitry
• Channel Separation: >65dB
• Volume Gain Remote Control
• Electronic Crossover Network
• Remote Control for Volume Gain
• Adjustable High Low Level Inputs
• Frequency Response: 10Hz - 40kHz
• Dimensions: 4.13'' L x 3.35'' W x 1.38'' H
• 
  
  

Get high quality audio amplification on your boat or other marine vehicle with the Pyle PLMRMP1B. It includes a marine-ready, two-channel power amplifier pushing up to 400 watts and a waterproof stereo 3.5mm-to-RCA adaptor for plugging in virtually any audio source, including your iPod or other MP3 player. Also included is a special waterproof bag to keep your equipment safe while listening to your favorite music. The amp is equipped with high and low level inputs, an electronic crossover network, plus power protection circuitry and anti-thump turn-on to keep your equipment secure. The included wired volume control easily mounts to your vehicle's dashboard and provides an easy way to control your music while at the helm of your vessel. Color: black.

From the Manufacturer

• WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade protection. It has a rugged construction and integrated power wiring harness to combat weather conditions as well
• POWERFUL 400 WATT: This amplifier receiver is powerful with its 400 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control
• 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP1B_0 is engineered as a 2-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input
• SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 10A fuse
• COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 4.13'' L x 3.35'' W x 1.38'' H and lightweight with only 1.89 lbs. The frequency response is 10Hz - 40kHz

User questions & answers

Question:	How do you manage to get 400 watts through a 10a fuse at 12v (120 watt maximum before fuse blows
Answer:	I highly doubt it's anywhere near 400 watts. If I had to guess I'm only getting between 50-75 watts at best. It does however push two 6.5 inch speakers in an ice chest cooler pretty good. Hope this helps.
Question:	Is this a bridgeable amp
Answer:	I would like an answer from the manufacturer on this. I'm sure most amps are bridgeable at 4 ohms whether they say they are or not. You just cannot crank it up too high.
Question:	Will this work on 2003 Electroglide classic
Answer:	As long as you have a 12 volt battery you can make it work. All you do is hook up as directed, then add speakers post amp and a sound source to provide audio.
Question:	Will this fit 2013 street glide
Answer:	Yes, it is very small approximately 3 1/2" square you can find a spot for it somewhere.

Product description

Pyle Model : PLMRA430BT

Marine Audio Bluetooth 4-Ch. Amplifier

Elite Series Waterproof Bluetooth Amplifier, Bridgeable 1000 Watt 4-Channel Amp

Features:

4-Channel Amp System

Built-in Bluetooth for Wireless Music Streaming

Tri-Mode Configurable & Bridge Mode Ability

Dual MOSFET Power Supply

Marine Grade Construction

Waterproof Marine Rating IP-01

Hi/Lo Electronic Crossover Network

Dual Adjustable Input GAIN Level Controls

Dual High Level Speaker Input Connectors

Dual RCA (L/R) Input Connector Jacks

Dual High Pass, Low Pass & Bass Boost Controls

Silver-Plated Speaker Output Terminal Connectors

Anti-Thump Delay Circuitry

Power & Protection LED Indicators

Built-in Thermal, Overload & Speaker Short Protection

Heavy Duty Aluminum Alloy Heatsink

Remote Turn ON/OFF

Bluetooth Connectivity:

Smart Auto Connect: Remembers Device Pairing Info

Compatible with All of Your Favorite Bluetooth Devices

(iPhone, Androids, Smartphones, iPad, Tablets, etc.)

Bluetooth Network Name: ‘Pyle Amp’

Bluetooth Version: 2.1

Wireless Audio Range: 25’+ ft.

Technical Specs:

1000 Watt MAX Power Output

500 Watt x 2 Bridged Output (250 Watt x 2 + 500 Watt x 1)

250 Watt x 4 Power Output

Amplifier Class: AB

Marine Grade Rating: IP-01

Frequency Response: 15Hz - 30kHz

Input Impedance: 10k Ohm (Low), 100 Ohm (High)

Input Sensitivity: 250mV (Low), 2.5V (High)

Variable Bass Boost: 0 - 18dB @ 60Hz

S/N Ratio: >95dB

T.H.D.: <0.04%

Fuse Type: 30A x 2

Power Supply: DC 12V

Dimensions (L x W x H): 12.0'' x 10.9'' x 2.7''

The Pyle Elite Series Bluetooth Amps provide waterproof power for all of your speaker needs. The marine grade waterproof construction and high-power efficiency ratings provide performance and reliability -- rain or shine! These multi-channel bridgeable amplifiers are perfect for the back yard, boat or even by the pool! Features include Bluetooth wireless music streaming ability. They work with all of your favorite devices and you will be able to instantly stream your favorite songs or internet radio service providers, quickly and easily (Compatible with iPhones, Androids, Smartphones, iPad, Tablets, MP3 Players, etc.). Additional features include MOSFET power supplies, built-in electronic circuitry protection, heavy-duty aluminum heat sinks and more. Enjoy versatile waterproof performance and next level sound amplification with the Pyle Elite Series Bluetooth Amps. (Models: PLMRA210BT, PLMRA410BT, PLMRA430BT, PLMRA630BT, PLMRA830BT).

• 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA430BT is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
• 2.1 BLUETOOTH CONNECTIVITY: Built with 2.1 Bluetooth connectivity that has a wireless range of 25+ feet. Compatible with all Bluetooth devices like iPhone, Android, iPad and tablets. It even has a smart auto connect that remembers device pairing info
• WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with silver-plated stereo speaker output terminal connectors to combat weather corrosion with long term us
• SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
• POWERFUL 1000 WATT: This amplifier receiver is powerful with its 1000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance

User questions & answers

Question:	Can someone let me know what size awg wire need to be connected to the battery? I currently have 16awg
Answer:	Hi, yes you have to adjust each channel. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRA420 for more details. Thank you.
Question:	Can I just look to speaker cities and work it from my android phone
Answer:	There are 4 low level rca jacks on amp to match up with the L and R front channels and L and R rear channels from the radio/tuner ...
Question:	Will this work with both a wired receiver and Bluetooth device
Answer:	As long as the ohm match the amp output.. yes. I wouldn't try to run all those speakers through one amp though. You are going to want and crossover to split the sound and two of theseAmps: one for your mids, and one for subwoofer. that way you are not pushing mid-range through your woofer and bass through your mids.
Question:	If i run an i-pod or phone directly to amp to kicker speakers, with no equalizer, will it sound good? please only those with a good ear for sound
Answer:	Absolutely!! we have this amp on our pontoon boat and it really pushes our radio and it stays cool. Enjoy and Merry Christams

Product description

Ride the waves with the Boss Audio MR800 Class A/B 2-Channel Full Range Weatherproof Marine Amplifier. This 2-Ohm stable amplifier features 800 Watts Max Power with a MOSFET power supply to get your boat rocking. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Turn up the Bass and feel the vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. The MR800 Amplifier features a unique rubber door, which tightly seals all control panel openings and weatherproof connectors to prevent corrosion and provide protection against the elements. Surf your playlists with the Boss Audio MR800. For further product details, please scroll down.

• 400 W MAX Power @ 2 Ohm x 2 Channels
• 200 W MAX Power @ 4 Ohm x 2 Channels
• 800 W MAX Bridged Power @ 4 Ohm x 1 Channels
• RCA Low Level Inputs, High Level Inputs, Fixed High Pass Crossover, Variable Low Pass Crossover
• Variable Bass Boost, Variable Input Gain Control, Input Sensitivity Selector, Remote Subwoofer Control
• THD @ RMS Output: 0.01, Channel Separation: 90 dB, Signal To Noise Ratio: 102 dB, Frequency Response: 6 Hz – 50 kHz
• Dimensions: Depth 8.8” x Width 7.3” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	So this requires a 12 volt power source. How many amps would the power source need to supply
Answer:	Yes
Question:	Can i power two 8" boss speakers and 1 sub woofer with this
Answer:	Honestly, the Mic isn't adjustable, it didn't really work well for me and was too far from my mouth. If you want a cheap headset this is good but if you want better gameplay I recommend spending a bit more money and getting something of higher quality.
Question:	Can this amp push 4 6x9's
Answer:	Yes that is what my son is using it on.
Question:	Can this 1,000 watt amp good for (4) 6x9's
Answer:	It comes with the adapter that plugs in directly to the bottom of controller

Product features

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable

Combine channels to provide a dramatic increase in power output.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed High Pass Filter

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

• The PM300X2 marine grade 2-channel amplifier (2.4" x 7.8" x 9.90") packs a Punch to deliver high output for those demanding stereo applications with 300 Watts of RMS power
• Versatile design can be used in either 1 or 2 channel configurations (RMS Power Output: 100 Watts x 2 @ 4-Ohm or 150 Watts x 2 @ 2-Ohm or 300 Watts x 1 @ 4-Ohm Bridged)
• Compact design with high dynamic power using Class-a/b technology, its perfect to drive a pair of coaxial speakers, component speakers, or a single subwoofer in your marine and motorsports vehicles
• High level input capable with Auto Turn-On circuit, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make the PM300X2 a serious power house
• Famous Rockford Fosgate build quality insures that the PM300X2 will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Would these be a good fit for powering a pair of Rockford Fosgate 6.5” punch marine speakers
Answer:	* Two CR123 3V lithium batteries must be installed to operate the Nautilus GPS. ** Remove retainer as indicated by the retainer label.
Question:	What’s in the box
Answer:	No this unit only broadcasts your GPS position via AIS and DSC frequencies to nearby vessels. It does not support two way communications.

Product features

Delivering a PUNCH of Power!

The Punch Marine PM300X2 is a 300 Watt 2-channel amplifier with high dynamic power using Class-A/B technology and featuring marine grade weather proofing technologies.

The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

Ideal for marine and motorsports application, this amp features a two-part marine grade epoxy coated circuit board and UV inhibitor coated chassis to protect the amp from the elements.

On board Punch EQ delivers more bass where you want it most by allowing up to 18dB of boost adjustment at 45Hz. Packed with features and performance, the PM300X2 delivers high output for those demanding stereo audio applications without sacrificing sound quality.

Product description

The VX505 Marine Bluetooth Amplifier delivers the weather-resistant, superior sound quality, while allowing users to enjoy their personal music without a head unit through wireless Bluetooth.

It's perfect for bringing entertainment to motorcycles, hot rods, UTVs, boats, gift carts, farm tractors, snowmobiles, ATVs or even riding lawnmowers. The VX505 is small-footprint and can be easily hidden, it pairs with any Bluetooth-compatible media device to provide 240 watts of power (60w x 4 at 4Ohms） to any speaker system in most any vehicle.

It includes a wired remote that controls device volume and other basic functions, which can be positioned within the driver's reach, mounted onto surface or flush style.

It boasts powered speaker outputs for adding a pair of speakers, resulting in a complete audio system.

Further, it also provides line-level outputs and can be used with higher powered amplifiers in a larger system.

Although it serve as the source unit, VX505 is designed to draw little current and be more efficient.

RMS Power Rating:

Compact 4-channel amplifier for car, motorcycle, and boat

50 watts RMS x 4 at 4 or 2 ohms

Wireless Bluetooth connection via wired remote controller

LED power and protect indicators

Blue-backlight remote is easily mounted

2 or Mono channel operation

Preamp RCA outputs to external amps

3 -way protection circuitry

Dimension: 3.9" W x 8" L x 2" H

• Power Output @ 4-Ohms: 60 watts x 4
• Length: 7.8" (20 cm). Width: 4" (10 cm). Height: 2" (5 cm).
• USB audio input / charging: 5V/1A. Frequency Response: 20Hz - 20kHz.
• Conformal-coated PCB and stainless-steel hardware for weather resistance
• Class D Amplifier

User questions & answers

Question:	How do you power it off when not in use don’t see a power button on the remote
Answer:	One of the wires is ready to connect to the switch of your choice. Could be ignition switch but I chose to connect with my radio and power on/off from my switch panel.
Question:	Does this amp have an aux input if i wanted to run a head unit in front of it
Answer:	Yes it does
Question:	Does it have a usb input to charge phone off of
Answer:	Yes
Question:	Can I Bluetooth my phone right to this unit without a head unit
Answer:	Absolutely