11 best cases and bags for digital cameras

Product description

Many of today's power sports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main pcb (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product. - Rms power output 2o: 75w x 4 - perfect for boats, atv's, motorcycles, cars and more - dimensions(wxhxd): 6-1/2" x 1-3/4" x 3-7/8".

• Rms power
• 4o: 50 watts x 4
• 2o: 75 watts x 4
• Peak power: 600 watts
• Signal sensing turn-on

User questions & answers

Question:	What size wiring kit should I use or would be best to connect this to my car
Answer:	Not sure why it wouldn't unless it's being installed in a glove box. It's less than 1 square foot.
Question:	I have 4 75 rms kenwood 6 1/2 door speakers, will this amp be good to power them? the physical size of the amp looks perfect for under the dash
Answer:	@ 4 ohms it pushes 500 watts but its single channel. I'd say go for it imho
Question:	Bridged, 4 ohms: 150W x 2 chan. Is that150W on one side = 300T Or is that 150 x 2=300 Totaling 600W with both sides
Answer:	This is a mono amp and has only 1 channel.
Question:	Is this amp small enough to go under the fairing of a 2015 rodaglide
Answer:	Yes, this amp will provide 300 watts PEAK power (150 watts x 2 channels), so you might want to make sure that you keep the gain turned down a bit.Yes, this amp has 2 channels, capable of delivering 150 watts each PEAK.

Product features

Kenwood KAC-M3004 - Power your music wherever you go

Kenwood's KAC-M3004 compact 4-channel amplifier will power up the music in your vehicle with 50 watts RMS per channel. That's enough to hear everything clearly above the noise of the road, trail, or waterway as you travel along. This little powerhouse will fit almost anywhere, including a storage compartment on a boat, motorcycle, or ATV, so you can install great sound in whatever vehicle you wish. Installing a pair of subs? You can bridge this amp to 2-channel mode and send 150 watts to each subwoofer.

High-level inputs ease installation

The KAC-M3004 will accept a signal from just about any source, whether you're using RCA cables from an aftermarket receiver or speaker wires from a factory radio. When you use the speaker-level inputs, the amplifier will sense the signal and turn itself on, so you won't need to run a remote turn-on lead to your car stereo.

Compact Amplifier

The Kenwood KAC-M3004 compact Class D 4-channel amplifier is designed to boost the output and clarity of your car stereo. The amp features a conformal coating on the circuit board to protect it from moisture. This allows you to use the amp for motorcycles, marine applications, or on All-Terrain Vehicles (ATVs). The KAC-M3004 delivers 50 watts RMS x 4 channels at 4 ohms. It also gives you 75 watts RMS x 4 at 2 ohms, or 150 watts RMS x 2 channels at 4 ohms bridged.

Connections

Power/Power Control Connections: The power, ground, and power control connections are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors or ring terminals are recommended. A minimum 10-gauge wire is required for power and ground.

Power Control: The Power Control wire should be connected to the head unit's remote turn-on lead when an aftermarket unit is used. This wire does not need to be connected if you're using speaker level inputs. The Signal-sensing Turn-on feature will turn on the amplifier when an input signal is detected.

Line-Level Inputs: The amplifier is equipped with two pairs of RCA inputs for connecting stereo RCA patch cables from the head unit to the amp. If using a factory head unit, or a unit without preamp outputs, you can splice the speaker wires to an RCA plug, maintaining the same polarity.

Product description

Most factory stereos, even high-end systems, protect speakers by reducing subharmonic output when the volume is high. That's okay in a regular system, but this bottle neck system will handicap low-frequency performance if you want to upgrade your factory stereo with amplifiers and subwoofers. The Earthquake Sound MB1 detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume. Now you can keep your factory stereo looking flush and its steering wheel controls intact while actually improving the bass quality and depth. The MB1 wires up to any system easily, and can be mounted in the front or rear of the vehicle. It has two gold plated inputs and outputs plus it has a remote dash control for easy adjustments. The WIDE knob adjusts how wide of a frequency range the MB1 will affect. The SWEEP knob allows you to pick the center frequency (between 27Hz and 63Hz) that you want the MB1's restoration circuit to maximize.

• Advanced digital bass restoration system detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume
• SWEEP and WIDE controls manage frequency ranges for extremely high precision, custom-built bass response
• Balanced inputs handle very high signal voltage up to 15 Volts and help minimize feedback
• Dash-mounted remote control knob
• Portable music enhancement with woofer protection circuitry

User questions & answers

Question:	Would this sound good on two L7 15's i want low bass around 20 hertz
Answer:	This will install a double DIN in a 2013 Jeep JK. Should work for a Double DIN up to year 2017 Jeep JK
Question:	Does this increase Output DB and will it work in either ported or Sealed box?Is it better used in either or box
Answer:	This is the mounting bracket. You will also need a wiring kit and probably an antenna adapter.
Question:	Can you control highs and mids with this as well
Answer:	It's a whole kit.. What they don't show you is the lip that the system sits on
Question:	Only one real question? Does it have switchable pfm modules
Answer:	Our Double Din kits will fit a 4"x7" stereo. If you have any other questions, please contact our Tech Support line at 1-800-363-4490 ext1.
Question:	what amp would you reccomend to push 6 of these and 6 ts-b350 tweeters
Answer:	No, this Kit will not work with your vehicle. The Scosche part that you need is ICFD3BN. For more information please contact Scosche Tech Support at 800-363-4490 Ext. 3. https://www.amazon.com/Install-Centric-ICFD3BN-Complete-Installation/dp/B01N8WKOUP/ref=sr_1_1?dchild=1&keywords=ICFD3BN&qid=1612301806&sr=8-1
Question:	Will this fit in the lower front door of a 2006 Tacoma
Answer:	No, this will not fit your specified vehicle. Please feel free to contact Tech Support 800-363-4490 Ext. 1
Question:	the price is one or two (the pair
Answer:	No, this definitely not for your truck. In fact, you're truck has two different possible install kits. Your truck will be very sub-model specific. For example, SVT, King Ranch, Platinum, Raptor, STX, etc. Between these sub-models there are two possible dash kits to use. One you can find on amazon is Scosche Dash Kit FD6205B. The other can't be found on Amazon and is the Metra 99-5830B. Both kits are made for Double Din decks, but also come with the attachment for Din sized stereos as well. Good Luck!
Question:	Hi. Price is for one or two? thank you
Answer:	No, our stereo install kits accommodate standard single DIN and double DIN stereos. They will allow a double DIN stereo with a max face size of 3 13/16 inches x 6 13/16 inches to fit. Not all aftermarket stereos offer the same size screens and some are considered oversized.

Product features

Pioneer TS-M800PRO 8" PRO Series Mid-Bass Driver

• 700 Watts Max Power (180 Watts Nominal)
• Optimally Blended Pulp Cone Woofer
• Designed for High Sensitivity and High Power Handling

The Pioneer Reference for Open Show series of speakers is designed specifically for those looking to produce some serious sound pressure levels. Inspired by Pioneer’s history of record-breaking SPL, the new P.R.O. series line of speakers is constructed with the street enthusiast in mind. With an emphasis on efficiency and power handling, the P.R.O. series lineup consists of bullet tweeters, mid bass drivers, and a subwoofer that can be mixed and matched to deliver impressive output, without requiring an impressive investment.

MB1 MEGA BASS Digital Bass Synthesizer

Most factory stereos, even high-end systems, protect speakers by reducing subharmonic output when the volume is high. That's okay in a regular system, but this bottle neck system will handicap low-frequency performance if you want to upgrade your factory stereo with amplifiers and subwoofers.

The MB1 detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume. Now you can keep your factory stereo looking flush and its steering wheel controls intact while actually improving the bass quality and depth. The MB1 has two gold plated inputs and outputs plus it has a remote dash control for easy adjustments. The Sweep and Wide controls manage frequency ranges for extremely high precision custom built bass response.

Advanced Digital Bass Restoration System

The MB1 MEGA BASS Digital Synthesizer contains a bass maximization circuit that perfectly reproduces and pumps low frequency back into the voltage line. Therefore, this synthesizer will enhance bass impact when using CDs, cassettes, and portable media players.

Easy Access Dash Mount Control Center

The MB1 is designed to be mounted anywhere in your vehicle, with the exception of the obvious places like the bumpers and gas tank. Each MB1 comes with a dash mount control center which allows you to control the intensity of the system's bass output right from the driver's seat. In addition, the dash mount unit comes with a built-in dual LED that dims and brightens as the bass increases and decreases.

DPF (DC Protection Filter)

The MB1's DPF overdrive circuitry allows you to have massive, hard hitting, concrete shattering bass while protecting the speakers from DC failures, commonly found in other bass enhancement devices.

Bass Expander Limiter

The MB1's Bass Expander Limited circuitry allows it to enhance the bass output of any audio system while controlling damaging burps.

Installation and Wiring Configuration

MB1 MEGA BASS Digital Synthesizer needs to be installed in the signal path as close as possible to the source unit (between a head unit and an external amplifier), before any crossover circuit. Although the MB1 is close to the source unit's signal, it is usually mounted in the rear of the vehicle, as close as possible to the amplifiers. If you are using an equalizer, connect the MB1 to the SUB OUT of the equalizer and use it to drive the bass amplifier, as shown in the diagram.

Product description

BOSS Audio Systems Elite BE2200.5D 5 Channel Class D Car Amplifier - 2200 Watts, 2 Ohm Stable, Digital, Full Range, Mosfet Power Supply, Great For Speakers and Subwoofers

• Power - 300 Watts x 4 Plus 1000 Watts x 1 Max @2-Ohms, 600 Watts x 2 Plus 500 Watts x 1 Bridged @4-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Bridgeable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Variable High Pass Filter

Variable high-pass filter gives you control over the frequencies that pass through to the full range speakers.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Product description

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview

Class-D Performance

PDX Technology Inside

Rotatable Illuminated Alpine Badge

Top-Side Control Panel

Voltage ON/OFF Sensing for OEM Upgrade

Built-in Crossover & Bass EQ

Remote Bass (RUX-KNOB) Compatible

Sound Quality

CEA-2006 Power Ratings

CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)

RMS Power Ratings

Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)

Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)

Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)

Sound Tuning

Crossover Frequency (CH1/2/3/4, HPF): 50 Hz - 400 Hz, -12 dB/oct.

Crossover Frequency (Subwoofer, LPF): 50 Hz - 400 Hz, -24 dB/oct.

Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)

BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)

Dimensions

Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm

Foot Print (WxHxD) in: 10-3/4" x 2" x 6-1/2"

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz - 45k Hz

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz - 400 Hz

THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %

THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %

Damping Factor for CH-1/2/3/4: >500

Damping Factor for Subwoofer: >1000

Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB

Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB

Weight: 2.76 kg/6lb 1.4oz

Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 - 4.0 V

Input Sensitivity (RCA Input, Subwoofer): 0.1 - 4.0 V

• PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
• Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
• Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
• All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
• PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally

User questions & answers

Question:	Will this power 2 5-way pioneer 6x9,2-8'mid-bass n 2 8- kicker flat subs. If not please help me
Answer:	This comforter is puffy; upon opening the package just fluff a bit.
Question:	Is Amazon part of Alpine's authorized dealer network
Answer:	This is light weight
Question:	Does this come with the bass knob? Listing seems to infer that
Answer:	Amazon doesn’t give the dimension for this one. I don’t see.
Question:	Can i bridge this to be a 3 channel amp? 2 channels plus the sub for the 3rd channel
Answer:	I have never had a problem with feathers coming out of the comforter.

Product description

1600W Max, 5-Channel PDX Series Car Amplifier

• Alpine PDX-V9 5 Channel Power Density Digital Amplifier
• CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1
• Stackable installation design with front-panel controls
• Quick-connect speaker connectors

User questions & answers

Question:	can you turn off the cross over
Answer:	Yes, all adjustments can be made by taking off the light panel strip. You can turn off the cross-overs to run channels 1-4. The sub channel is dedicated for lower frequencies.
Question:	is this amp vgood for compoments in front..ie tweeters 4/ 6.5component typeR/coaxial/typeR i 12 in sub
Answer:	Yes, I have been using this amp for several years now without any problems. This 5 channels amp is hooked up to 6.5 components in the front, 6.5 3-ways speakers in the rear, along with 10" inches closed kicker box. Very impressed so far with the system. Hope this might be a little help.
Question:	would this work well with 2x Apline type R 6 1/2 Coaxial front speakers, 2x 6x9 type R rear speakers, and 1 alpine Type R 12" sub
Answer:	It should work fine. I'm running 4 6.5 infinity kappa speakers and one 10" jlw7 and it sounds great.
Question:	Since Vius isn't an authorized seller, there is no warranty correct? I'm suspicious of the low price, but that's offset some by the positive reviews
Answer:	Correct, no warranty because they are not an authorized reseller. I purchased both of my PDX amps (F6 & M12) on amazon and then added a square trade warranty for a couple bucks. Saved hundreds. Planning to do the V9 for my wife's car.

Product description

Audio Control D-6.1200 6-Channel Car Amplifier with Digital Signal ProcessingProduct Highlights: 6-channel car amplifier with digital signal processing 125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms) 400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode) all controls and adjustments accessible via PC, Android, or iOS device (AudioControl's Smart-User DSP software included) variable high- and low-pass filters (20-20,000 Hz, 12 or 24 dB/octave) subsonic filter at 32 Hz AccuBASS circuitry for improved bass response 30-band graphic EQ, parametric filters, phase correction time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs Other Features: MILC (Maximum Input Level Control) LED optimization and clip indicators GTO signal-sensing turn-on 8 speaker-level inputs (summable) 6 preamp inputs 2 preamp outputs fuse rating: 40A x 3 wiring and hardware not included with amplifier 4-gauge power and ground wires recommended dimensions: 12"W x 2-1/8"H x 8"D

• 6-channel car amplifier with digital signal processing
• 125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms)
• 400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
• all controls and adjustments accessible via PC, Android, or iOS device (AudioControl's Smart-User DSP software included)
• variable high- and low-pass filters (20-20,000 Hz, 12 or 24 dB/octave)

Product description

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier American Bass designed the compact Phantom Series amplifiers that are capable of high-power output with high efficiency and difficult loads. American Bass completed the mission with 5 different models that are both reliable and fairly priced. Integrated with the most modern technology, the Phantom Series amplifiers are one of the most dependable car amplifiers on the market. The PH-2500.1-MD-V2 has a max power of 2500 Watts and a compact design of 2.2" x 6.0" x 11.04". With some amazing features such as the compact size and tiny footprint, double sided PCB and SMD components, full mosfet design, adjustable bass boost, noise-free design, and the overload, overhead, and high/low voltage protection, this amplifier is meant for long-lasting, top of the line performance. Specifications: American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier Max Power: 2500 Watts Frequency Response: 10 Hz - 220 Hz Optional Remote Controller 1 Ohm Stable Compact Size and Tiny Footprint Bass Boost: 0-6dB - 12dB (Switchable) Full Mosfet Design LPF and HPF Crossover Adjustable Bass Boost Noise Free Design Overload, Overheat, & High/Low Voltage Protection RoHS Compliant Dimensions (H x W x L): 2.2" x 6.0" x 11.04"

Product description

640W 5-Channel Picasso Nano Class-D Amplifier

• PN5.640D - Soundstream 5-Channel 640W RMS Picasso Nano Series Class D Amplifier
• RMS Power Rating: 4 ohms: 60 watts x 4 chan. + 200 watts | 2 ohms: 80 watts x 4 chan. + 350 watts | 4 ohms Bridged: 160 watts x 2 chan. + 350 watts
• Full MOSFET PWM Power Supply
• SMD Technology on Double Sided PCB
• Dimensions: 4.75"W x 1.5"H x 10.3" L

User questions & answers

Question:	Can I input left right channels and have it split left right bridged and sub
Answer:	You don't need the remote if you use the speaker level input.
Question:	when using the speaker level inputs; does the 5th (sub) channel require an active input? my head unit doesn't have 5 speaker outputs
Answer:	It is ok, use it for lows and speakers for highs only. If you have a small truck it will do the trick. I plan on buying one more for my suv. For how easy it is to install it is worth it.
Question:	why do the pigtails have five wires each
Answer:	In short, yes it does. You can hook up to left/right speakers (high level input) or pre amp input and set the input switch accordingly. The one input terminal is used for either source. I'm using it on a motorcycle, works well. Good luck!
Question:	Made in korea? Or made in china
Answer:	You can but remember to change the fuse. If the fuse is #10 thing about #15 or #20.

Product description

Planet Audio MB1200.1D Class D Car Amplifier - 1200 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers

• Power - 1200 Watts Max x 1 @1-Ohm, 600 Watts Max x 1 @2-Ohms, 300 Watts Max x 1 @4-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

User questions & answers

Question:	What size fuses does it take and does it bump how many true rms is it
Answer:	it will make your FM reception useless
Question:	does this have signal sensing turn on
Answer:	Yes. The remote wire
Question:	Does it have rca outputs
Answer:	It has RCA IN/OUT
Question:	Will this work with 2 12 kicker comp c
Answer:	No. This amp at its best will be a max of 300w not 1200 like they say. Also the out wires for the speakers are way to thin. you need a 14 or 12g wire for that Save your time and money and get the Rockville RXM-T2 Micro 2400w 2 Ch . I got it and will never regret it like I did with the planet audio. watch Williston Audio Labs review on you tube $115 Hidden Gem? Rockville RXM-T2 Review and Test RXD-T2 [4K] and you will see why. It is that good. This Planet audio is CRAP

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

1 Ohm Stable

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic Filter

Subsonic filter restricts low frequencies below the specified setting for better subwoofer protection and performance.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

• POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 6.5 lbs.
• CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	What amp kit should I get if I buy this amp
Answer:	4 gauge will work fine. I do recommend doing the 3 wire kit under the hood to keep the dash lights and head lights from dimming.

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1 Ohm Stable

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic Filter

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over input signal from the head unit to achieve customized balance between power and sound quality.

Product description

It's an increasingly common problem. You can't replace your vehicle's premium factory radio, but the premium factory amplifier isn't powerful enough for you. Furthermore, the factory amp gets digital information from the vehicle's databus and replacing the amp would mean you'd lose all audio control, like volume and balance, as well as other features like steering wheel controls, audible navigation alerts, warning chimes, and Bluetooth connection. Replacing the factory amp with Kenwood's Excelon P-XR600-6DSP amplifier along with its included iDatalink Maestro amp replacement module adds a huge amount of power and tuning ability to your system while retaining all of the vehicle's audio and communication functions.

 

Product highlights:

• 6-channel car amplifier with digital signal processing
  
  -75 watts RMS x 6 at 4 ohms
  
  -100 watts RMS x 6 at 2 ohms
  
  -200 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
• CTA-2006 compliant
• Class D amp technology
• iDatalink Maestro AR amplifier replacement module included
• 10-channel 32-bit 192 KHz digital processor
• All controls and adjustments made via Kenwood DSP Control App via your compatible Bluetooth device
• Selectable high- and low-pass filters (31-19,900 Hz) with selectable slopes (6, 12, 18, 24 dB/octave)
• 13-band graphic and 3-band parametric equalizers
• Time delay/alignment
• Installer Mode accesses all controls
• User Mode limits functions to selecting EQ and time-alignment presets and subwoofer volume
• 4 processed preamp outputs
• Fan cooling
• Fuse rating: 40A x 2
• Dimensions: 12-5/8"W x 2-1/16"H x 7-1/8"D

• Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance. The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP. Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
• Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use.
• The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
• These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
• These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.

User questions & answers

Question:	What wire thickness should i use for xr 600 kenwood amp
Answer:	My son used 8 gauge AWG Power wire with an attached AGU Fuse holder. He likes ton go a bit overkill though. So he used 8 gauge copper on the rest as well.