13 best cars amplifiers

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Power up your music on the trails with the Boss Audio Riot R1004 4 Channel Class A/B Amplifier. This 2-Ohm stable Amplifier features 400 Watts Max Power with a MOSFET power supply to get your music in gear. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price. Get better sound with the Boss Audio R1004. For further product details, please scroll down.

• Power - 100 Watts Max x 4 @2-Ohms, 50 Watts Max x 4 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.1 lbs.
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It will with ok sound quality if it's for inside the car listening pleasures. However getting another one and bridging it or a higher powered amp for a good baseline would be recommended.
Question:	Can you support two 10" subs with this one amp
Answer:	Hello. Yes, this amplifier will support two subwoofers. You will need to make sure that each subwoofer does not exceed 400 watts peak power.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	Hello. I would recommend purchasing a monoblock amplifier to power your subwoofer. The R4004 is a 4 channel amplifier that would work better for your speakers.
Question:	whats rhe size of the amplifier
Answer:	Dimensions of the R4002 are 10.79" x 10.43" x 2.25".
Question:	Can I run a chuchero and a subwoofer
Answer:	Yes
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.
Question:	Bluetooth version? AptX features
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	Hi, it is a class D amplifier. Thank you.

Product features

Clear Sound

Get clear sound on the trails with the Boss Audio R1004 4 Channel Class A/B Amplifier. With 400 Watts Max Power and MOSFET power supply, this 2-Ohm Amplifier gives your music a boost. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price.

Mosfet and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

1600 Watt 4-Channel Amplifier

• Blaupunkt AMP1604 4-Channel, Full-Range Amplifier Max. Output Power: 1600W
• RMS Power (4 Ohms): 55W x 4 - RMS Power (2 Ohms): 79W x 4
• Frequency Response: 10Hz - 30Hz
• Crossover Frequency: 50Hz - 250Hz - Crossover Slope (dB/oct): 8-10dB/oct
• Signal-To- Noise Ratio: =>96dB

User questions & answers

Question:	Dose it have a high pass input
Answer:	yes
Question:	Is this amp bridgeable
Answer:	Yes it is bridgeable but it doesn't push near as much power as it claims I'm using it to run mids and highs and it does fine but it's literally only pushing about maybe 75 watts per channel
Question:	Is this good for mids and highs
Answer:	extremely good! im using this for the doors in a subaru... and it is quite fantastic!
Question:	Speaker level inputs
Answer:	this amp has 4 channels of standard RCA inputs (2 front , 2 rear) also, there is a dongle in the box that connects directly to Hi-pass signal from the speaker wires (like a line out converter). (hi-pass input) - there are 2 of these.. one for front, one for rear. i think this is what you are asking for clarification on

Product description

Behind every Blaupunkt product is over 90 years of innovation and excellence, and the AMP7502 2-Channel, Full-Range Amplifier embodies just that. With an optimized 160W RMS and 750W output, you can give your audio system the perfect boost in sound. Its slim design fits perfectly into any trunk, so you can easily hook it up to your stereo system.

Amplifier Class: AB

No. of channel: 2/1 Channel

Dimensions: 11.8" x 7.5" x 2.1"

Max. Output Power: 750W x 2

RMS Power (4 Ohms): 160W x 2

RMS Power (2 Ohms): 325W x 2

Frequency Response: 10Hz - 45Hz

Signal-to-Noise Ratio: =>90dB

Voltage Supply: 11 - 16V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 2-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 1

• 750 watt maximum power full-range amplifier
• Amplifier Class: AB
• No. of channel: 2/1 Channel
• Max. Output Power: 750W x 2

User questions & answers

Question:	Is it compatable with 1200 watt alphasonik 10" subwoofer
Answer:	Yes, & that sub isn't "REALLY" 1,200 watts, bridged this amp, with the gains maxed, could prob blow that sub's voice coils with some hip-hop.
Question:	I ordered a amp1501 single channel to put 2 6x9 subs on in my harley, will this give me the bass i need to make them thump
Answer:	It should ,its not enough for my 1100 watt 10" but should drive the 6x9s
Question:	Can i hook up 4 speakers to this amp
Answer:	Yes you could but I recommend getting a 4 channel amplifier which blaupunkt has and you can find it here on Amazon.
Question:	Will this power a couple rockville 600 rms watt each 12" subs in a sealed box
Answer:	No, it's only rated at 750 watts which means it will only support one 600w sub. You will need one blaupunkt 750w amp for each sub woofer.

Product features

AMP7502

Get amped up for the AMP7502 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 2/1 Channel, Max. Output Power: 750W x 2, RMS Power (4 Ohms): 160W x 2, RMS Power (2 Ohms): 325W x 2, Frequency Response: 10Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 16V DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 2 Channel, Crossover Frenquency: 50Hz - 400Hz, Crossover Slope (dB/oct): 8-10dB/oct, Fuse: 30A x 1, Dimension: 11.8 x 7.5 x 2.1in.

Product description

The Blaupunkt 1500W 4-Channel, Full-Range Amplifier (AMP1504) embodies over 90 years of innovation and excellence in Blaupunkt products, making it the perfect amplifier to install into your motor vehicle. With an optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road. This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system. Get amped up for the Blaupunkt 1500 Watts 4-Channel, Full-Range Amplifier (AMP1504) and take your car to the next level.

Amplifier Class: AB

No of channel: 4/3/2 Channel

Max. Output Power: 1500W x 4

RMS Power (4 Ohms): 150W x 4

RMS Power (2 Ohms): 300W x 4

Frequency Response: 10Hz - 45Hz

Signal-To- Noise Ratio: =>90dB

Voltage Supply: 11 - 15V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 4-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 2

Dimension: 8.6" x 7.5" x 2.1"

• 1500W Maximum Power Full-Range Amplifier
• Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
• This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

User questions & answers

Question:	I have a couple 6x9 and a box with separate chambers for 8” subs any pros or cons
Answer:	The amplifier runs warm in high pass so it will probably run hot but does have thermal protection circuitry and will reset but wouldn't advise running it like that!!!
Question:	It quit working with in 10 minutes. It has a red fault light not green. I disconnected the speaker wires killed power turned on still red . What to do
Answer:	Make sure power lines and especially a ground wire is hooked up properly. That's the main thing ground is very important that's actually touching metal the car itself. And none of the speaker wires are shorting out
Question:	Does this amplifier support bluetooth operation
Answer:	No it doesn’t..... I bought this same 1500 watt full range amp and tried to get in touch with Blaupunkt for some tech questions I had, GOOD LUCK WITH THAT!!!! Apparently Blaupunkt amps are not associated with or made at same place as All other Blaupunkt audio units & products, search it on internet
Question:	how many true watts does a 1000 x 4channel amp actually put out
Answer:	I'll post a link to a youtube video where this amp was put on the Amp Dyno but if you don't feel like watching it the results were 65- 71 per channel (cea certified) @ 4 ohm @ 14.56V. Keep in mind those numbers will drop when an amp is installed in a car because your only going to about 13.4 to 13.9 V to the amp and that"s if everything is the right size and grounded properly. As a rule of thumb a single 30-amp fuse means that the amplifier can produce 300 watts of power at most. A60 amp fuse will make 600 watts plus or minus 10-20 depending on the quality of the amp. The quality of this amp is crap it may have 2 30A fuses but makes no where near that power. At 2 ohms it makes about 100 watts per channel. The 2 30A fuses making 600 watts doesn't account for the total efficiency. This amp is about 70 efficient which is awful ! If you plan on using this to power 4 door speaker at 4 ohms 65-70 watts it will work just fine because guess what those 6.5" 500 watt speakers lied about the power handling too. If your not very familiar with car amps and want to know if your getting a deal or ripped off watch this guys videos, https://www.youtube.com/watch?v=FbA2Vdg3uSo thats for this amp and 2 other Bloujunk amps. If you're looking for a budget amp that puts out like a prom date, 1100 watts @ 1 ohm (2 ohm DVC sub) for $104 check out his video of a dyno drag race the Ignite R3000/1D vs the 2nd best budget monoblock amp the BOSS AR4000D. https://www.youtube.com/watch?v=UvHWxhm7Eog&t=630s My advice buy the Ignite and the warranty Amazon sells for $20 so you know your going to get 2-3 years of worry free ownership.

Product features

AMP1504

Get amped up for the AMP1504 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 4/3/2 Channel, Max. Output Power: 1500W x 4, RMS Power (4 Ohms): 150W x 4, RMS Power (2 Ohms): 300W x 4, Frequency Response: 1 0Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 1 SV DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 4 Channel, Crossover Frenquency: S0Hz - 400Hz, Crossover Slope (dB/act): 8-1 0dB/oct, Fuse: 30A x 2, Dimensions: 8.6 x 7.5 x 2.1 in.

Product description

General Features:

• Alpine BBX Series 4-Channel Car Amplifier, BBX-F1200
• Class-A/B 2-ohm Stable 4-Channel Amplifier
• RMS Power Rating @ 4 ohms: 50 watts x 4 channel
• RMS Power Rating @ 2 ohms: 70 watts x 4 channel
• RMP Power Rating @ Bridged, 4 ohms: 130 watts x 2 channel
• Total power output: 600 watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 4/3/2 or channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity: .2V - 8V
• Frequency Response: 5 - 50000 Hz
• Total Harmonic Distortion (THD):
  • Make sure this fits. by entering your model number.
  • Alpine BBX-F1200 4-Channel Amplifier
  • This new BBX amplifier gives you Alpine power performance at an amazing price. And they're designed to fit easily in virtually any system.
  • Terminal Layout: Two-Sided
  • Total Max Power: 600W

User questions & answers

Question:	Can I install in a Harley batwing fairing
Answer:	Is that a bike? If it's 12 volt yes... It's just a question of where are u going to mount the amp
Question:	So if i used channel 1&2 for bridge i get 130 watts rms and then can i use channel 3&4 for 2 6 1/2 4ohm and get 50 watts rms for those speakers? sorrn
Answer:	Channels 3 and 4 have a bass control, so it would be better to bridge those for a sub. Then use 1 and 2 for your 6.5” speakers. But yes you are correct on the watts
Question:	What is the wire size for 12vdc
Answer:	At least 8 gauge
Question:	does it come with the wiring harness
Answer:	Mine did just power though. If you're looking for rca style plugs not included with the amp

Product description

Class Ab Bridgeable Variable Input Voltage (Quick Thermal Dispersion) Technology Heat Sink Low-Noise Preamp High-Level Inputs Low-Level RCA Inputs & Outputs 2- & 3-Channel Operation Modes Built-In Variable Electronic Crossover 

• (Quick Thermal Dispersion) technology heat sink Low-noise preamp
• High-level inputs
• Low-level RCA inputs & outputs

User questions & answers

Question:	Will theses power 4 door speakers? Not sure how all this works. Just heard that door speakers sound better with an amp
Answer:	Yes, in fact that's exactly what this amp is designed to do. You'll get beautiful sound and the fader control on the head unit will work. Unit allows you to hook up high level, (speaker wires from deck), or low level RCA inputs.
Question:	I bought Scosche speakers from walmart. Will this work those
Answer:	I have four of them 6by8 200 watts n a 400 watt sub 8 sounds ok with out the amp in a town car ....but will this amp push all 5 speakers??? Those come in 300 watts 6/9 ...and 200 watts 6/8
Question:	Will this power 4 100 watt 6x9 and a sub
Answer:	2 months ago I hooked this amp up in a 66 mustang a pair of 6x9 and 3.5 on channel 1&2 using the high pass filter and a pair of 10" Crwin Vega DVC wired down to 2 ohms each. one on channel 3 and the other on channel 4 using the low pass filter. I was very surprised by the sound. Great bass sound and clear sound. It is not competition grade by any stretch of the imagination, but it does give some great bass sound and rattles the mirrors. i was waiting to write a review until it had some time to prove itself. My friend is very happy with it, doesn't want a second amp for bass. Use the right size power wires and you will be happy.
Question:	How many ohms per channel
Answer:	4 ohms, but it's 2 ohms stable and is okay to hook up that way, according to the directions.

• The R2-500X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 75 Watts x 4 @ 4Ω OR 155 Watts x 4 @ 2Ω OR 250 Watts x 2 @ 4Ω Bridged/Mono)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Can I run this as a 3 channel amp? 75w x 1 @ 4Ohm and 250w x 1 @ 4Ohm
Answer:	Yes, it’ll work great in 3 channel mode. Just be sure that you’re bridging into a single 4 ohm load. Feel free to send us a direct message or text/call our experts at 323-231-3525 with any questions
Question:	ohm stable
Answer:	Yes. It produces (conservatively) 250 watts RMS x 2 @ 2 ohms. Thanks for your interest in Rockford Fosgate!
Question:	Is this amp waterproof? Want it for a Polaris Slingshot
Answer:	No, the R2 series of amplifiers are not Element ready and should not be exposed to the elements. Here are our Element ready series of amplifiers: https://www.amazon.com/stores/page/BBFD70CE-A64C-417A-909C-76317E1A2400?ingress=2&visitId=e69d8aab-5221-4837-8268-78465b0496a6&ref_=ast_bln Thanks for your interest in Rockford Fosgate!
Question:	This amp states this on the information (250 watts x 2 @ 4ω bridged/mono). can connect to bridge/mono with 4ohm thats converted to 2ohm
Answer:	Yes, running 4 ohm bridged will be the same power as 2 ohm per channel. Thanks for your interest in Rockford Fosgate!

Product features

Primed For Performance!

The Prime R2-500X4 is a full-range class-D 4-channel amplifier, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono and rocking 500 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization.

Product description

Specification:

Type: Car Amplifier

Distortion: ＜0.01%

Rated power(RMS): 4*100W

Peak power: 3200W

Standard impedance: 2 to 4 Ω

Frequency response: 20HZ-20KHZ

S/N:＞ 90dB

Input Voltage: DC 12V

Sensitivity: 150mV

Dimension: 32*22*6cm



One Set Package Included:

1 x Car Amplifier

1 x Screw Set



Pls feel free to contact us if you have any question.

• 4 Channel, strong power dynamic voice restores high degree of sound.
• Aluminium alloy drawing process, slim design, easy to install.
• Great heat dissipation performance, safe and stable.
• Energetic, strong power, easy to promote sub woofer. Nondestructive amplifier installation, 360°round sound.
• Provides you a wonderful in-car entertainment.

User questions & answers

Question:	Will this amp push 10" skar audio midrange speakers
Answer:	Yes it can push 10" skar audio midrange speakers

Product description

The Pioneer GM-D9705 GM Series 2,000 Watt 5 Channel Class D Amp features a rugged frame design with a high-quality, textured flat panel to combine strength and simplicity. The GM-D9705 5 channel automotive amplifier is rated at 2,000 watts max, with the A and B channels rated at 75 watts x 4 (RMS) and the subwoofer output rated at 500 watts at 2 ohms (RMS). Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9705 offer increased flexibility and give listeners more control. Use the wired bass boost knob to add 0 to 18 more dBs. This car amp has block terminals for a cleaner installation and direct wire contact to minimize resistance.

• A/B channels: 75W RMS x 4 @ 4Ω
• A/B channels: 100W RMS x 4 @ 2Ω
• SW channels: 350W RMS x 1 @ 4Ω
• SW channels: 600W RMS x 1 @ 2Ω
• A/B channel freq resp: 10Hz–50kHz

User questions & answers

Question:	This amp can power some 15" Soundstreams, mids, and highs
Answer:	I guess but it really depends on the power requirements of the speakers being used relative to the rated power outputs of the amplifier. A 500 watt subwoofer in a properly engineered encloser will function better than a 2000 watt monster subwoofer on this particular amplifier. Hope this helps.
Question:	What are the physical dimensions of this amp? I cannot believe it is over 4 inches tall
Answer:	its not 4 inches tall... its 2-3.
Question:	Can i run a 2 6x9s together on the sub channel? A 6 speaker set up
Answer:	you can if you are connecting them in series/parallel but don’t expect to get a lot voice from them just bass.
Question:	So i can use this amp to run my 4 door speakers and a separate passive sub box
Answer:	This amp will power 4 door speakers and a subwoofer.

Product description

Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.

• 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
• Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
• On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
• Cast Aluminum Heatsink with Stealth top mounted control panel
• Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

User questions & answers

Question:	Does the R500x1D come with the remote or is it sold separately
Answer:	It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now
Question:	Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit
Answer:	I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too.
Question:	Does this amp have an auto turn on feature so I dont have to wire up a remote turn on
Answer:	Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit.
Question:	is this amp 4 or 8 awg power and ground
Answer:	It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7!

Product features

Prime 500 Watt Class-D Mono Amplifier

The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.

Product description

Hydro Motorsports and marine by DS18 - waterproof electronics for all the elements - great fit for jeep UTV ATV Motorsports boat jet-ski

• DS18 Hydro NXL800.5D full range digital Marine five channel stereo amplifier with remote gain control
• RMS output @ 4-ohms: 4 x 80 + 200 watts. @ 2-ohms 4 x 125 + 300 watts. @ 4-ohms bridged: 2 x 250 watts. Frequency response: 20 - 20Khz.
• Signal to noise ratio: > 95Db. Selectable x-over: LPF/flat/hpf. Lpf/hpf filter: 40Hz - 3Khz.
• Smc (surface mount component) technology. RCA input/ speaker/ power direct harness design. Leds indicate working status: power/ protection.
• Compact size waterproof for all elements (stainless hardware, UV/Salt Fog protection, IPX6 waterproof level). Dimensions: 295 x 125 x 42 mm.

User questions & answers

Question:	Wanting to put in sxs to power tower speakers. Going to run switch to power on and off do i hook the remote wire to switch? Along with power wire
Answer:	Run your power to the battery. Run your remote to the switch. The remote will be your on/off switch source.
Question:	Do you blue tooth to the amp
Answer:	No you buy the Bluetooth receiver and wire it to the amp remote wire
Question:	If the amp gets wet will it quit until it dries out
Answer:	I have gotten mine wet several times I wouldn't soak it under water but getting it wet seems to still work fine.
Question:	What kind of warranty does this have
Answer:	The warranty is a one year limited manufacturer defect warranty. If you ever have issues you can contact us on our Amazon account or call/email our office to get support!

Product features

DS18 NXL800.5D Marine Amplifier

The DS18 Hydro All Elements Series is comprised of many components and accessories to make any build imaginable come to life.

IP65 Waterproof and UV Protected

IP65 Waterproof Certified and UV Protected. Install this anywhere on your boat, UTV, Jeep, or Off-Road vehicle.

(Certificate: LCS190527017BS by LCS Compliance Testing Laboratory, 5/30/19)

Plenty of Power

Ranging from 600 to 1600 watts, feel confident that your marine speakers have plenty of power

Compact Design

Not only is it waterproof, but it is not going to take up valuable space on your boat, UTV, or off-road vehicle

Product description

Drive up your music vibes with the Planet Audio Anarchy AC1800.5 5-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1800 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1800.5.



For more product details, please scroll down.

• Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	My receiver has 4 RCA outputs. Can I run the 4 RCA outputs into this amp and run 4 coaxial speakers plus a subwoofer
Answer:	Yes you can. There is a switch on the amp and it will take the sound from channels 3 and 4, and use it for the subwoofer.. so you dont need a 5th rca cable.
Question:	What is the RMS
Answer:	Taken from Google: RMS stands for root mean squared.You use RMS to tell you in part how loud the speakers are going to be, you also you its sensitivity rating.RMS also tells you the most amount of watts that you speaker can handle on a continuous basis. This is the figure you use when looking for an amplifier and powering the speaker.1000w RMS is a lot and i would be very skeptical buying any speaker that says it handles 1000w RMS, most companies that put out a speaker like that inflate their numbers by making the THD level higher so once you turn it up the signal is not clear. Also they will make it 1000w RMS but its sensitivity rating is very low such as under 80db/1w.i know i have two JL subs that are rated at 300 watts RMS each and the 600 watts it puts out is enough to make me go deaf.
Question:	I have a kicker 10" sub with 4 ohms, but when I hook it up to the amp I get absolutely no sound out of it. The first four channels are running fine
Answer:	There is a switch near the sub control on the amp.. direct or channel 3-4. If you do not have a sub input the switch should be set to 3-4. So it will get the sound from channels 3-4. . Hope this helped
Question:	Will this amp be suitable for 2 pairs of Pioneer TS-A6885R Speakers 350W (60W) nominal and TS-SWX251 Subwoofer Power(Nominal)800 W (200 W
Answer:	It is extremely important to understand Ohms law when choosing speakers. One answer on another question says it is not 2 Ohm stable. They wouldn't make the UL list if it didn't. The fifth channel is 1 channel that is 2 Ohm stable. It can handle 2 single voice coil subs wired in parralel which brings the Ohms down to 2 Ohms. I do not recommend DVC in a mono amp unless the amp is 1 Ohm Stable. If you got 2 DVC subs wired parralel would present a 1 Ohm load to your amp and blow it up.