9 best alpine 2 channel amps

Alpine is a well-known brand in the car audio industry that manufactures a variety of car audio components, including 2-channel amplifiers. 2-channel amplifiers, also known as stereo amplifiers, are commonly used in car audio systems to enhance the power and quality of sound in vehicles. Here's what you need to know about Alpine 2-channel amps:

  1. Amplification: Alpine 2-channel amplifiers are designed to amplify audio signals from the car's head unit or source unit. They provide power to two separate channels, typically used for driving a pair of speakers, such as front door speakers or a pair of component speakers (woofers and tweeters) in a car audio setup.

  2. Power Output: Alpine 2-channel amplifiers come in various power output ratings, typically measured in watts per channel (WPC) or total power output (in watts). The power output determines how loud and clear the audio will be.Higher wattage amplifiers can provide more headroom for louder and cleaner sound.

  3. Sound Quality: Alpine is known for producing high-quality audio equipment, and their 2-channel amplifiers are no exception. They are designed to deliver clear, distortion-free sound, enhancing the overall audio experience in your car.

  4. Bridgeable: Many Alpine 2-channel amps are bridgeable, which means you can combine the power of both channels to drive a single speaker or subwoofer. This configuration is commonly used for powering a subwoofer and can provide more bass output.

  5. Compatibility: Alpine 2-channel amplifiers are compatible with a wide range of car audio systems. They can work with factory car stereos or aftermarket head units, making them a versatile choice for car audio enthusiasts.

  6. Size and Form Factor: Alpine 2-channel amps come in various sizes and form factors, allowing you to choose one that fits your installation space and requirements. Some models are compact and can be installed in tight spaces, while others may be larger and offer more power.

  7. Installation: Installing an Alpine 2-channel amplifier typically involves connecting it to your car's electrical system, including the battery and speakers. Proper installation is crucial to ensure optimal performance and safety.

  8. Additional Features: Depending on the model, Alpine 2-channel amplifiers may include features such as built-in crossovers, adjustable gain controls, and thermal protection to prevent overheating.

  9. Price Range: The price of Alpine 2-channel amplifiers varies depending on the model and its features. There are options available for a range of budgets, from entry-level to high-end models.

In summary, Alpine 2-channel amplifiers are part of the Alpine car audio product lineup and are designed to enhance the audio quality in your vehicle. They offer various power outputs, sound quality, and features to meet the needs of car audio enthusiasts, and their reputation for quality and performance makes them a popular choice in the car audio industry.

Below you can find our editor's choice of the best alpine 2 channel amps on the market
  

Alpine PK BBX-T600 BBX Series 600W 2-Ohm Stable 2 Channel Class A/B Amplifier - BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier - DC-DC PWM Power Supply + 4 Gauge Amp Kit

Based on 9 reviews Check latest price

Product description

BBX-T600: 600W 2-ohm Stable 2 Channel ClassA/B Amplifier This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Description: Amplifier Type: Class-A/B Channel Design: 2/1 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 1 Pair RCA pre-inputs 1 Pair RCA pre-output General Specification: RMS Power Ratings: Per Channel into 4ohms (≤1%THD+N): 2 x 50W Per Channel into 2ohms (≤1%THD+N): 2 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP: 50Hz – 250Hz, HP: 80Hz – 1.2kHz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4-ohms) 95 dB

  • Package: Alpine BBX-T600 + 4 Gauge Amp Kit
  • BBX-BT600: 600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
  • RMS Power Rating: 4 Ohms: 50 Watts x 2 Channel, 2 Ohms: 70 Watts x 2 Channel, 1 ohm: N/A, Bridged 4 Ohms: 130 Watts x 1 Channel
  • Input sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB
  • Variable high-pass filter: 80 - 1200 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 20A x 1

User questions & answers

Question: Is this amp suitable for a custom 10" cargo sub for an 07 Dodge Durango truck, and can it be mounted under a seat
Answer: It can, but two channels probably wont work
Question: Will this amp power "two" alpine swr-12d4 type-r 12" subwoofers with dual 4-ohm at the same time
Answer: Def does it's power and as long as your electrical is up to par It doesn't get hot. I run 2 off these along with 2 smart3's for my subs and I haven't had a problem yet.
Question: Will this work with either Alpine Type R's, SWR-12D4 and SWR-12D2? Would the 2 ohm pull more power from my battery dimming headlights more
Answer: Yes
Question: Hi, Does this come with Remote Bass control Knob
Answer: How many speakers are hooked up and what ohms are they

Alpine PK BBX-F1200 BBX Series 600W 2-ohm Stable 4 Channel Class-A/B Amplifier Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB w/Amp Kit

Based on 22 reviews Check latest price

Product description

Alpine PK BBX-F1200 BBX Series 600W 2-ohm Stable 4 Channel Class-A/B Amplifier Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB w/Amp Kit Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel. Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1 Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel. Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1

  • Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit
  • BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier
  • RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel.
  • Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB
  • Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1

User questions & answers

Question: How much speaker wire does this kit come with
Answer: Yeah it can I have mine mounted under the seat of my 2014 chevy silverado double cab rear seat with 2 10 inch Fosgate subwoofer
Question: Will this fit in a 2017 Toyota Tacoma ? Wanted to make sure it’s enough wire
Answer: This amp is stable at 1 ohm. If you have two DVC subs then wire each 4 ohm coil in parallel, dropping the impedance to 2. Then take the subs and wire them in parallel together for 1 ohm. This process requires great subs like Orions or similar. But I will say from experience as I've done this with 2 12" Orion 2NT subs and the sound pressure would blow your hat off your head and strike the windshield. The power rating from Alpine is tested in the factory@4 ohm and it pulled 660watts RMS. So one ohm will make you think otherwise.
Question: Will this run two 600w rms subs
Answer: First of all you will likely need a capacitor to supply enough power to the amp during the peaks. SWR -12D4 wired in parallel will give it a 2 OHM load for the amp to produce 500W rms. That said you need an amp to make 750W rms to take a full advantage of type R 12 woofer.
Question: Why does it say 1200w Max on the box not trying to blow my speakers anyone know
Answer: It doesn't come with it but you can buy it separately.

Alpine BBX-T600 300 Watt 2 Channel or Mono Car Amplifier Class-A/B 2-ohm+Amp Kit

Check latest price

Product description

Description of RWK81: The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.. . 1. Our RCA cables are 100 % copper. These are top of the line RCA cables. . 2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.. . 3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.. . 4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

  • 4 Gauge Car Amplifier Wiring Installation Kit. 17 High Grade RCA Cable. 17' 4 Gauge Translucent Blue Power Cables. 17' 18 Gauge Blue Remote Cable. 17' 16 Gauge Clear Speaker Wire. 3' 4 Gauge Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder.

Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, at 2 Or 4 Ohms

Based on 132 reviews Check latest price

Product description

Alpine KTA-450 4-Channel 50W RMS x 4 Compact Amplifier

  • Features: 4-channel car amplifier, 50 watts RMS x 4 at 4 ohms (45 watts RMS x 4 at 2 ohms), 100 watts RMS x 2 bridged at 4 ohms, CTA-2006 compliant, Dynamic Peak Power (DPP) technology adds a burst of power when needed, Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels, Preamp and speaker-level inputs, Selectable 2- or 4-channel input.
  • PowerStack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia, eceiver (#500ILXW650), Wiring, hardware, and fuse not included with amplifier, 12-gauge power and ground leads and a 20A fuse recommended, Dimensions: 7"W x 1-3/8"H x 3-9/16"D.

User questions & answers

Question: Is there warranty with this or through alpine? I’m having issues with mine
Answer: I think the kit comes with about 20-25 ft of speaker cable. I was able to wire the front speakers in my Suburban and still had enough speaker wire left to connect my subwoofers to my 2nd amp.
Question: Free returns
Answer: yes
Question: What’s the best amp wiring kit to use for this amp, 4 or 8 gauge? On a 2007 Honda Civic
Answer: No but check out the taramps md1200.1 on amazon....it will
Question: Can you connect to Subwoofers
Answer: That is just Watts, what you want to look at is the RMS power. That's is your true watts you actually get I wouldn't be worried about it unless you are running a very low wattage speaker

ALPINE BBX-T600 2 Channel AMP in Car Vehicle Sound Audio Amplifier System 600W

Based on 6 reviews Check latest price

Product description

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency. Bass EQ for Best Bass Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass. - See more at: http://www.ebay.ie/itm/ALPINE-BBX-T600-2-Channel-In-Car-Vehicle-Sound-Audio-Amplifier-System- Alpine was thinking about versatility when they built their BBX Series T600 2-channel amplifier. In 2-channel mode, it delivers 50 watts RMS @ 4 ohm to each of your car's front or rear speakers, making for some sweet sound on your drive. bbx-t600-insert.jpgYou can also run this amp in 2-channel mode, 2 ohm mode, powering with 70 watts RMS per channel to run any 2 ohm impedance speakers.Or, if you need a good amp for bass, you can switch the amp to 1-channel mode and send up to 130 watts RMS to a subwoofer or bass tube. You can always find a place for this amp in your system, with is clean lines and minimalistic styling its classic alpine at its best and is designed to stand the test of style and time. PRODCT HIGHLIGHTS: 2-channel car amplifier 50 watts RMS x 2 at 4 ohms (70 watts RMS x 2 at 2 ohms) 130 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant variable high- and low-pass filters (50-250 Hz (LP) 80 -1.2 kHz (HP), 12 dB/octave) selectable bass boost (+12 dB at 45 Hz) MOSFET power supply fuse rating: 20A x 1 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier Dimensions 250mm x 240mm x 52mm

  • Amplifier Type: Class-A/B BBX Amplifier use Bass EQ to maximise the performance of the system to have even better powerful bass.
  • The BBX-T600 2 Channel Amplifier is a Class AB amplifier delivering 600 watts high power output. The frequency range with these two filters will make it easy to tune in your system to your listening requirements and ensure optimum efficiency.
  • Thermal Control: Thermal Management Control Power Supply
  • Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Crossover: Variable Low-Pass / High-Pass Green/red Status LED 1 pair RCA pre-inputs 1 pair RCA pre-outputs

Taramp's TS 400X4 2 Ohms 4 Channel 400 Watts Class D Full Range Amplifier

Taramp's

Based on 835 reviews Check latest price
  • 4 Channels
  • 400 watts
  • Small form factor

User questions & answers

Question: Can it Power 8 speakers in my van? Basic 6" crunch speakers
Answer: Yes it can. If they are 4ohm each speaker. If you wire two speaker per channel in parallel to each other this will work out great
Question: Es de buena calidad he visto varios vomentarios que no dura mas de 1 mes
Answer: Hola, desde que la compre no me ha dado ni el primer problema, te lo recomiendo, y de esos comentarios y que no dura ni un mes es por la mala manipulacion
Question: It says bridged 4ohm meaning I can only use 2 outputs at 4ohm? i have 4 speakers in my car
Answer: Yes bridged is designed to output more power but only one output per two channels. You can use the channels normally and connect four speakers but they will not be bridged, meaning less power but can wire down to 2 ohms. This should be fine if they're just midrange speakers.
Question: wha does class d refer to
Answer: A Class B amplifier DEMANDS a perfectly matched set of Push/Pull transistors on each channel, to form the waveform for that channel. You can expect about 50% of the rated power to be dissipated as heat. These were the Gold Standard for audiophiles, as getting perfectly matched Push/Pull transistors means screening hundreds/thousands of individual transistors to find a pair that met specs. A Class C amplifier is much cheaper, it uses an inductor/resistor set to store energy, and a single transistor to drain the stored energy. You may lose a little quality in the sound; but you save on heat, as these run on the order of 75-80% efficiency, compared to ~50% on the Class B Then we have Class D (Digital) that uses a switching based transistor, that switches far faster speed than any ear can hear (or speaker is capable of reproducing) to replicate the waveform. The result is ~90-95% (runs very cool), excellent sound reproduction, low heat means high reliability, and much lower costs. At least, low costs to the manufacturer - these will eventually become the standard amplifier for everyone, they will constantly get better sounding, higher powered and lower costing. They will also incorporate better and better features, such as active EQ, adjustable slope cross-overs, ambient noise reduction, etc. It's just a matter of math, processing power, and whatever the manufacturer decides to incorporate to set his product apart from the competition.

Alpine R-A60F R-Series Four Channel Amplifier

Alpine

Based on 22 reviews Check latest price

Product description

General Features:

  • Alpine R-Series 4-Channel Power Density Amplifier
  • 100W RMS x 4 (4ohm, 14.4V < 1% THD+N)
  • 150W RMS x 4 (2ohm, 14.4V < 1% THD+N)
  • S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)
  • Only 46-degrees of phase shift
  • Hi-Resolution Audio Compliant
  • Approximate Weight: 11 lbs
  • Authorized Internet Dealer
  • 1 Year Manufacturer's Warranty

  • Alpine’s Class D Amplifier Circuit with Dual Post-Filter Feedback Loops
  • CTA-2006-B Power Rating: 100W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N); 150W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
  • Bridged: 300W x 2 (4ohm, 14.4V, ≤1% THD+N)
  • S/N ratio: >85dB (ref: 1W into 4 ohm), 106dB (at rated power)
  • THD+N ≤0.03% (ref: 1W into 4 ohm)

User questions & answers

Question: Does this amp over heat
Answer: Yes
Question: What gauge size do they use for power and ground terminals? What gauge size for the speaker terminals
Answer: It recommends a 12 gauge wire kit. 8 gauge should be fine, anything bigger than that might cause issues
Question: I have this amp in my truck my 6x9 in the front are scratchy now what 6x9 will best suit this amp
Answer: You can bridge it down to 2 channels (100 watts) and run a couple of 4ohm woofers. Obviously its not going to give you any crazy performance or really drive the woofers, but if you are just looking for some added bass, yes it will work.

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK

Rockford Fosgate

Based on 2 reviews Check latest price

Product description

Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.

  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

User questions & answers

Question: Does the R500x1D come with the remote or is it sold separately
Answer: It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now
Question: Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit
Answer: I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too.
Question: Does this amp have an auto turn on feature so I dont have to wire up a remote turn on
Answer: Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit.
Question: is this amp 4 or 8 awg power and ground
Answer: It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7!

Product features

Prime 500 Watt Class-D Mono Amplifier

The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.

Alpine PDR-V75 5 Channel Digital Amplifier - 100W RMS x 4 + 350W RMS x 1

Based on 110 reviews Check latest price

Product description

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview

Class-D Performance

PDX Technology Inside

Rotatable Illuminated Alpine Badge

Top-Side Control Panel

Voltage ON/OFF Sensing for OEM Upgrade

Built-in Crossover & Bass EQ

Remote Bass (RUX-KNOB) Compatible

Sound Quality

CEA-2006 Power Ratings

CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)

RMS Power Ratings

Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)

Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)

Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)

Sound Tuning

Crossover Frequency (CH1/2/3/4, HPF): 50 Hz - 400 Hz, -12 dB/oct.

Crossover Frequency (Subwoofer, LPF): 50 Hz - 400 Hz, -24 dB/oct.

Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)

BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)

Dimensions

Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm

Foot Print (WxHxD) in: 10-3/4" x 2" x 6-1/2"

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz - 45k Hz

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz - 400 Hz

THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %

THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %

Damping Factor for CH-1/2/3/4: >500

Damping Factor for Subwoofer: >1000

Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB

Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB

Weight: 2.76 kg/6lb 1.4oz

Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 - 4.0 V

Input Sensitivity (RCA Input, Subwoofer): 0.1 - 4.0 V

  • PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
  • Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
  • Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
  • All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
  • PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally

User questions & answers

Question: Will this power 2 5-way pioneer 6x9,2-8'mid-bass n 2 8- kicker flat subs. If not please help me
Answer: This comforter is puffy; upon opening the package just fluff a bit.
Question: Is Amazon part of Alpine's authorized dealer network
Answer: This is light weight
Question: Does this come with the bass knob? Listing seems to infer that
Answer: Amazon doesn’t give the dimension for this one. I don’t see.
Question: Can i bridge this to be a 3 channel amp? 2 channels plus the sub for the 3rd channel
Answer: I have never had a problem with feathers coming out of the comforter.

Latest Reviews

View all