9 best rockford fosgate amps for cars

Product description

Package includes: Rockford loaded subwoofer enclosure Boss Mono amplifier Amplifier installation kit **We are an authorized Rockford Fosgate dealer** The **Rockford Fosgate R1 2X10** is a loaded enclosure containing dual 10” subwoofers constructed with durable MDF, high density carpet, and features quick release terminals to promptly remove or replace the enclosure in your ride. Power handling includes a RMS power of 400 watts and a MAX power of 800 watts. The **Boss AR1500M** MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm. Other features include a MOSFET power supply, class A/B circuitry, 2 ohm stable and a low pass crossover. Also, includes a remote bass control. The BOSS AR1500M amplifier is the perfect amp to power your car audio system! This 8 Gauge amplifier installation kit has everything your need to wire your car audio system! It features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. Give your car audio system the best wire available with the BOSS KIT2 8 Gauge Complete Car Amplifier Wiring Kit!

• **Subwoofers:**
• New Rockford Fosgate R1 2X10 10" 800 Watts Dual Loaded Subwoofer Sub Enclosure
• Power Handling:
• Peak: 800 watts
• RMS: 400 watts

User questions & answers

Question:	Will my 1998 S10 support the wattage
Answer:	Hi There! It's a single coil, rated at 4 ohm. Like I've told others, this isn't the one you want if you're planning on entertaining the neighbors. Its great for adding some bass for a lower powered system. Its a great choice for most kinds of music but if you listen to a lot of rap/ reggae with a lot of low bass this isn't the best choice.
Question:	will this fit on the back of my golf
Answer:	13.5" x 19.0" x 5.25" (bottom) x 3.25" (top) 34.29cm x 48.26cm x 13.34cm (bottom) x 8.25cm (top) Hate to put it this way but measure. that's how I found out for my ranger. These are the measurements from rockford
Question:	Will this fit under the seats of a 2000 Chevy Silverado extender cab
Answer:	They sound pretty good. Not going to rattle your mirrors off but they will fill in the bass nice and take up a small amount of room. Go with a 12 inch ported sub if you want something that hits hard.

Product description

**We are an Authorized ROCKFORD FOSGATE Dealer** These TWO ROCKFORD FOSGATE **R2D4 12** 12" 500W 4 Ohm DVC Prime R2 Car Audio Subwoofer can handle 500 Watts of MAX power per sub (1000 Watts per pair), and 250 Watts of RMS power per sub (500 Watts per pair). They use an anodized aluminum voice coil former that provides superior heat dissipation (up to 100° at max power levels). It has the capacity to handle power under continuous demand, conforming to CEA 2031 industry standards, and the stitched tinsel leads improve reliability and performance by reducing fatigue and possible shorting. The R2SD4 12 also features: a mica injected polypropylene cone that provides clean and accurate bass, 12 gauge compression terminals, an integrated PVC trim ring, a liner spider with embedded 16 gauge tinsel leads, a StampCast basket with integrated spider venting that keeps the motor cool, and this sub is best suited for standard sealed enclosures. Receive large bass impact with the ROCKFORD FOSGATE **R2D4 12** 12" 1000W 4 Ohm DVC Prime R2 Car Audio Subwoofer! The **Boss AR16002** 2 channel car amplifier features a MAX power of 1600 watts and a RMS power of 260 watts at 4 ohm. Other features include the MOSFET power supply, hi/low pass crossover and comes with a bass remote control. Also includes 8 Gauge Complete Amplifier Installation Kit. This kit includes everything you need such as cables, hardware & accessories for proper installation of your amplifier.

• **Subwoofers:**
• 2) NEW ROCKFORD FOSGATE **R2D4 12** 12" 1000W 4 Ohm DVC Prime R2 Car Audio Subwoofer
• Power Handling (Max): 500 Watts per sub (1000 Watts per pair)
• Power Handling (RMS): 250 Watts per sub (500 Watts per pair)
• Features:

Product description

Rockford Fosgate R600X5 Prime Series 5-channel car amplifier -( 50 watts RMS x 4 at 4 ohms ) + 300 watts RMS x 1 at 2 ohms Amplifier + Completed Amp Kit + RCA's Rockford Fosgate performance in a rugged package – the Prime Series R600X5 5-channel amp can drive 4 speakers with 50 watts RMS each, while powering a subwoofer with up to 300 watts RMS. Not worried about your rear speakers? You can bridge the amp to 2-channel mode to drive a pair of high-performance components with 150 watts RMS each, while still sending that 300 watts to a sub. You can use the high- and low-pass filters and Rockford Fosgate's famous Punch boost to get maximum performance from your speakers and sub. And speaker-level inputs let you hook this amp up to almost any system, even a factory stereo. Rugged performance and value The R600X5's heavy cast-aluminum chassis efficiently draws damaging heat away from its internal components, ensuring reliable, long-term play. The amp's built-in sensors keep track of the output current and power supply temperature, ensuring that plunging impedances (they change constantly during play) or even a short circuit won't hurt anything. Your driver's seat will become your favorite place for listening to music once this Prime amp goes to work.

• Rockford Fosgate R600X5 Prime
• 5-channel car amplifier
• Completed Amp Kit
• variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
• variable low-pass filter, always engaged (50-250 Hz, 12 dB/octave)

User questions & answers

Question:	Is the amp kit that comes with this amp quality? Or should I pick up a different one
Answer:	This tool is built sturdy, not sure of actual weight but it will hold more than your wrist can hold, I hope that answers your question.
Question:	is the power and ground copper or cca
Answer:	It definitely sits flat. This is an industrial strength flipper you would use in a restaurant. If you're just going to be flipping pancakes and burgers in the kitchen I'd say get a lighter tool.
Question:	Well this handle a two ohm sub
Answer:	It is stamped on the metal by the handle 'made in China'. It is heavy duty as described and I would give it 5 stars for my personal opinion. It is a good value.
Question:	Does this amp come with the bass knob cuz the one I bought it didn't have it in the package
Answer:	For sure!!

• The Punch P400X4 is a 400 watt 4-channel amplifier (2.38” x 7.76” x 11.03”) is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels
• Versatile multi-channel design is a perfect choice for virtually any vehicle (RMS Power Output: 50 Watts x 4 @ 4-Ohm OR 100 Watts x 4 @ 2-Ohm OR 200 Watts x 2 @ 4-Ohm Bridged)
• RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
• Featuring Class A/B topology, RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
• 50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged
• Works with factory installed & aftermarket source units

User questions & answers

Question:	Max size wire for remote turn on? Like the secure connection of bigger wire
Answer:	According to forums online. Yes, PoE will only send power if it requested by the device. Otherwise the switch just interacts with it as if it were a regular switch.
Question:	Can this amp push 4 deaf bonce sylvester 6.5a mis range speakers? speaker is rated at 120rms/260watt max each
Answer:	This is a long shot but does anyone know what kind of fan is in the the LGS124P, 24 port, POE switch? I would like to replace it with a higher quality and more quiet one if possible. Thanks out there.
Question:	What is the true rms power on the 600x4? I know these amps are under rated
Answer:	These answers are for the 8, 16 or 24 port switches. The 8 and 16 port switches do not have the ability to have rack ears, but you can place them on a relatively inexpensive rack shelf (you don't need a deep one). The 24 port switch comes with rack ears.
Question:	Will this amp push two Rocksford fosgate 4 ohm 12" subs
Answer:	Hi. You may use the LAPAC1200C to extend the wireless coverage of your existing network and for increasing the number of users that can connect to it. We also don't have an access point that has a seamless roaming feature. You can consider looking into an extender with the roaming feature instead.

Product features

System Versatility & Unmatched Performance

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Product description

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms

• 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm
• Accepts High Level & RCA Level Input; Remote PLC (Punch Level Control) - Sub Channel
• Cast aluminum heatsink with Top Mount Controls
• 12dB/octave crossover. MOSFET power supply
• 4 Gauge power/ground connectors. The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

User questions & answers

Question:	I see two high level inputs not three. if my stereo doesnt have any rca output how can i connect the subwoofer too
Answer:	It has a built in crossover, no need to worry about a sub-input.
Question:	Is the Rockford R600X5 a good choice for two sets of JBL speakers (5.25 component and 6x9) rated at 75w RMS each at 2ohm AND a Sub rated at 300w RSM
Answer:	According to their website, this would be a good choice of power for the speakers. 75wrms @ 2Ohm for each speaker and 300wrms @ 2 ohm for the sub. Make sure that the sub is 2Ohm, though. When you receive the amp it will come with a QC sheet explaining each power rating. Just make sure you tune it properly and it will work well. http://www.rockfordfosgate.com/products/details/r600x5
Question:	does it come with whatever wires you need
Answer:	You will need an amp install kit for the recommended gauge.
Question:	The remote for the sub comes stock with this? I don't need to order it separate like amazon is suggesting
Answer:	The base remote comes with this amp

Product features

Prime 600 Watt 5-Channel Amplifier

Overview:

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

Technologies:

Class A/B

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Class D

High efficiency amplifier design that reduces current consumption from the charging system.

• The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Interested in purchasing this amp for my 2014 camry se. does anyone know if my 2014 camry se comes with the factory amp
Answer:	Yes
Question:	Can the subwoofer channel 5 take its signal from the other channels (the way some amps do), or does it have to have its own input
Answer:	This unit will work with any vehicle radio with RCA Input and Output so the answer is Yes.
Question:	Will o/1 gauge power wire fit
Answer:	Hi, this unit is different than the epicenter, bass restoration device. The Epicenter will restore bass where this unit will filter out frequencies for a cleaner sound. What were you trying to achieve? If you would like you can contact us at (323)-231-3525 and one of our techs can assist you. Thank You.
Question:	This amp has 2 rca inputs for a sub but my headunit does not. do i need to use these sub rca inputs? or can i just plug the sub speakers wires into it
Answer:	Yes
Question:	What is "pass through? Is that to add another amp
Answer:	Yes it does

Product features

Primed For Performance!

The Prime R2-750X5 is a full-range class-D 5-channel amplifier, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω and rocking 750 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

RMS Continuous Power

50 Watts x 4 + 200 Watts x 1 @ 4Ω

OR

100 Watts x 4 + 350 Watts x 1 @ 2Ω

OR

200 Watts x 2 + N/A @ 4Ω Bridged/Mono

• The Punch P300X2 is a full chassis (2.38” x 7.76” x 9.86”) 2-channel stereo amplifier, that delivers a rocking 300 Watts of RMS Power
• Versatile design for full-range or component systems or can be bridged for use with smaller subwoofers (RMS Power Output: 100 Watts x 2 @ 4-Ohm OR 150 Watts x 2 @ 2-Ohm OR 300 Watts x 1 @ 4-Ohm Bridged)
• RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
• Featuring Class-A/B topology, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Will this for in a harley road glide fairing
Answer:	It may or may not. I need to know which factory radio you have.! Because you initiated the question, I can offer you a very aggressive price on this unit and all needed install items. Simply text me at 512-750-8726 for a quote. Thanks!!
Question:	I bought this 2 chanel for my 2 (500 watt) each p3 daul voice coil subwoofers what is the best wireing to get the max power
Answer:	Yes, the amplifier has a 2/4/5 channel switch so you can create a sub output with only Front or Front and Rear inputs only. Thanks for your interest in Rockford Fosgate!
Question:	Can I power (3)15" inch sub with this amp alone
Answer:	No only 4 Ga you can use 0 ga and a distro block
Question:	Can this amp be used for (2) kicker dsc5 (41dsc54) 5 1/4" d-series coaxial speakers and (1) kicker 10c84 (10c8-4) 8" single 4 ohm car subwoofer
Answer:	This is not an issue with this amplifier. It has a 2/4/5 channel switch so you can use amp's sub output after you attach the headunit to the front and or rear outputs. Thanks for your interest in Rockford Fosgate!

Product features

High Output & Exceptional Sound Quality

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms.

The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

The Class A/B topology results in greater reliability and exceptional sound quality. The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

• The Power T1500-1bdCP mono amplifier featuring Constant Power, is truly the best of the best and delivers 1500 Watts of POWER
• Proprietary Constant Power amps are the most powerful on the market, delivering up to 25% more power across all impedance loads (1000 Watts x 1 @ 4-Ohm or 1500 Watts x 1 @ 2-Ohm or 1500 Watts x 1 @ 1-Ohm)
• Highly efficient Class bd produces max power with minimal strain on the vehicle's electrical system. Our full chassis amp (2.14” x 8.14” x 14.91”) is optimized for use with subwoofers in cars/trucks
• Balanced differential RCA pass-thru outputs, On-board Punch EQ with +18dB boost @ 45Hz and 24dB/octave Butterworth crossover make the T1500-1bdCP an impressive POWER house
• Famous Rockford Fosgate build quality insures that the T1500-1bdCP will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	I have one CT Sounds 12" meso..is this amp strong enough
Answer:	I really don't know but from what I've been reading the meso is capable of 2000 watts and this RF is 1500 watts. So long as you have enough juice combing from your power system you would be rocking the Meso at 75% which is a decent area to be powering. I'm no expert on these matters and would consult crutchfield or any other experts. I hope this helps!
Question:	Has anyone tried runing this amp at .75ohm load and if ao how did it do
Answer:	I haven't, nor would I reccomend trying it, it's not rated to be sub ohm stable so I'd be interested myself. I have 2 dvc 3 ohm onyx 10"s that I hooked up series-parallel to keep it at 3 ohm. It's pushing somewhere between 1,200 and 1,300 watts and honestly I cant imagine how loud it'd be at the 1,750 watts the dyno sheet said it'd push at 1 ohm. I am interested myself how the amp would handle it. My last amp a 2,000 watt arc audio got fryed after about 15 seconds of flex at .75 ohm (full parallel) it was 1 ohm stable... left a bad taste.
Question:	Can this amp run 2-w7s
Answer:	Depends on the size of the W7s, definitely can do 10s and 12s. In all honestly, I believe it could even push the 13.5"s pretty well. I had this pushing 2 12" Type X's with no problem at all. Gain was about 50%.
Question:	will the t1500 be better with one 2 ohm or 4 ohm kicker l7 15in, the sub is 1000 rms
Answer:	Run it at 4ohm.......the reason why is kickers speaker like the l7 cant whole all that power consistantly like that it will blow at 2ohm but keep it at 4 to it cool

Product features

High Level, Raw Power!

The Power T1500-1bdCP is a full size chassis, 1500-Watt mono amplifier with Constant Power, built on Rockford Fosgate’s patented Class BD technology platform. Known for the ability to produce raw power at high levels, the Power series amplifiers have been the class standard by which all others are measured.

Featuring our patented Punch EQ, delivering more bass where you want it most by allowing up to 18dB of boost adjustment at 45Hz. Also featuring superior heat dissipation capabilities, with our award winning Dynamic Thermal Management cooling design and our MEHSA3 heat management technology, resulting in 20% reduction in thermal impedance. Plus, it also features our Focused Mass technology design, keeping the amp cool and ensuring the amp continues to play even under high power and output demand.

Our Constant Power technology, results in up to 25% more power (Watts) across all impedance loads, by balancing demand versus draw between the amp and speaker. The result is a listening experience cleaner, louder and more impressive than ever before.

The frequency response of the T1500-1bdCP is optimized exclusively for use with subwoofers in cars and trucks. And at 1,500-Watts, this monster will run any demo vehicle competing in Sound Pressure Level with ease.

• The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Is this enough power to run 2 P212s? Or should I go up to the
Answer:	I'm running it with a 1600 watt 12in, I have the power output at a minimum level and it pushes that sub to the limit
Question:	Is this marine grade for an atv
Answer:	This is junk. No power at all is pushed out. I regret it everyday
Question:	Is this good enough for a 10inch p3 4ohm
Answer:	Contact Person Listing the peoduct.
Question:	With 4 8" 4ohm subs what's the best way to hook up? i have 2 subs parallel l/r stereo. is that best
Answer:	This one

Product features

Primed For Performance!

The Prime R2-500X1 is a full-range class-D mono amplifier, capable of operating at 4Ω or 2Ω mono and rocking 500 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases. Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass to the desired level for your music.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization - and with the included remote level control, you’re in charge of your bass.