11 best fosgate mono amps

• The R2-1200X1 full-range class-D mono amplifier (1.9" x 6.8" x 11.3") is packed with features and performance to deliver power and bass on demand with 1200 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 400 Watts x 1 @ 4Ω OR 800 Watts x 1 @ 2Ω OR 1200 Watts x 1 @ 1Ω)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Will this push 2 RE audio xxx, 2ohm, 1500 watt, woofers
Answer:	No. I purchased a separate Marathi radio but note that it does not have Harmon Kardon speakers and build quality is much less attractive in plastic.
Question:	Recommend setting for infrasonic filter is 28hz on this amp. Where on dial? Goes from
Answer:	Yes, you can can connect your Bluetooth device like phone or MP3 players to it. If you are thinking to connect to Bluetooth speakers than no, you can not do it.
Question:	Which 10” subwoofers would be best for this amp
Answer:	5000 songs in offline mode, but this has Wi-Fi capability which when connected will give you another 15000 more songs.
Question:	What size fuse do you need with this amp
Answer:	You mean what size it is? 7 cm x 13 cm x 1.8 cm

Product features

Primed For Performance!

The Prime R2-1200X1 is a full-range class-D mono amplifier, capable of operating at 4Ω, 2Ω or 1Ω mono and rocking 1200 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases. Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass to the desired level for your music.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization - and with the included remote level control, you’re in charge of your bass.

Product description

Get more out of your car audio and take it to the next level of audio perfection with the unparalleled performance of the Rockford Fosgate 500 Watt Mono D Amplifier with Remote. This Rockford Fosgate is a quality made Mono D car amplifier rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, and phase switch. The amplifier is CEA 2006 compliant and comes with a remote bass control. Great audio starts with a great amp, so be sure to choose quality with the Rockford Fosgate 500 Watt Mono D Amplifier with Remote.

• 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
• Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
• On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
• Cast Aluminum Heatsink with Stealth top mounted control panel
• Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

User questions & answers

Question:	Does the R500x1D come with the remote or is it sold separately
Answer:	It comes with the remote. I thought it didn't so I bought one for it and it already comes with it so I have two now
Question:	Does this amp provides High (Speaker) Level Inputs so it could be connected to a factory head unit
Answer:	I know this is late, but it may help others. Yes it does and you can tie into signal at rear speaker wires. The built in crossover will allow use of a sub woofer. Only drawback to this set up is that if you turn down head unit bass for doors ect. it also affects sub amp. HU built in crossover would be better for a balanced and more adjustable sound. This requires the HU to be upgraded however. A line output converter is a good option too even if you have low input ability. Makes for a neater install IMO. Bottom line is that it is dooable. Good amp too. Birthsheet is 648 watt @ 2 ohm 14.4 v on mine. In vehicle at idle in real life I average 629 using amp draw and voltage formula, I also own the P300-1 which pushes about 415 @ 2 ohm real life wattage. Birth sheet of 426. Banging for years in wife's ride on that one no issues. The new one rocks good so far in my ride. Love these amps. So much power for the size. Also as a D class amp they are efficient and take less away from the vehicle power system causing less strain. Bang some high power AB amps for a few years and your whooping on that alternator and battery shortening their lives. Less light dimming too.
Question:	Does this amp have an auto turn on feature so I dont have to wire up a remote turn on
Answer:	Another option in which I chose since it does need turn on signal is to use an added retained accessory power relay or just a simple relay. Your going to remove side panels to run RCA anyway so tap easily into a 12v power source when vehicle acc is on which can be found closest to amp position that is passing to rear of vehicle already. I used this one from Radio Shack. Model: 275-233 Catalog #: 2750233 0.5-AMP SPST REED RELAY AT 12VDC. This set up should be used to turn on multiple amps and relieve the head unit circuit. No tiny wire to run either. Although if this wire is just attached to RCA prior to install for a 1 amp install then this is the easiest way. If you use the relay then remember to fuse it to protect the head unit circuit.
Question:	is this amp 4 or 8 awg power and ground
Answer:	It has 4 awg connections for both power and ground. I am using mine with 8 awg wire and it runs perfect. I am not running it at max gain though. Only using it to run one 10" L7!

Product features

Prime 500 Watt Class-D Mono Amplifier

The Rockford Fosgate R500X1D is a quality made Mono D car amplifier that is rated at 500 Watt x 1 Channel @ 2 Ohms RMS. The amplifier features a MOSFET power supply, cast aluminum heatsink, muted turn on, short circuit protection, over current protection, RCA pass thru outputs, high level inputs, real time output and power supply thermal sensing, phase switch, the amplifier is CEA-2006 compliant and comes with a remote bass control. The dimensions are 8.50 L x 6.80 W x 2.00 H inches.

• The R2-750X1 full-range class-D mono amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 250 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω OR 750 Watts x 1 @ 1Ω)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Is this amp compatible with 4 AWG wire
Answer:	20.75lbs This is for the whole pot and li combination. Just weighed it on a scale.
Question:	Can this amp push two 12 inch American bass 4 ohm elite series 1244 subs
Answer:	The cast iron products are and always will be made in the USA. The enameled cookware is made in China under strict Lodge product quality control. Most accessories are made in various places under strict control also.
Question:	Can this power 2 kicker 10s 2ohms
Answer:	12 inch is usually considered the standard size for dinners, but I guess if you were only cooking for two people the 10 inch would do fine. We have several 12 inch that we use for dinners, and a 10 inch we cook dessert in. We also have a large 14 inch for when we have a large group to cook for like a family gathering. You can put a whole chicken into a 12 inch but just a few pieces of chicken into a 10 inch. If you want to cook bread or rolls, you'll need the room of the 12 inch. The beauty of the Dutch oven is you can stack them while cooking so you can use a 12 inch for the main course, another for dinner rolls, and top it off with a 10 inch for dessert. Be careful not to confuse quart size with inches. Lodge typically measures by size in inches, while Camp Chef ovens are deeper and measure by quarts. I've noticed the deeper Camp Chefs take more coals to get the same cook times, but they do hold more food. Lodge offers better quality, but Camp Chef includes a lid that can be flipped upside down and used as a griddle, which is handy if you'll be camping. I like both brands.
Question:	Will this amp push 1 JL audio tw3-d
Answer:	Yes, it does. :)
Question:	Will this for in a harley road glide fairing
Answer:	It’s thick gel yes
Question:	I bought this 2 chanel for my 2 (500 watt) each p3 daul voice coil subwoofers what is the best wireing to get the max power
Answer:	It is just one piece, doesn’t have an screen protector
Question:	Can I power (3)15" inch sub with this amp alone
Answer:	Yes I do, has no problem
Question:	Can this amp be used for (2) kicker dsc5 (41dsc54) 5 1/4" d-series coaxial speakers and (1) kicker 10c84 (10c8-4) 8" single 4 ohm car subwoofer
Answer:	Not sure.....if you measure your ipod and let me know measurementsI can let you know!!

Product features

High Output & Exceptional Sound Quality

The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms.

The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

The Class A/B topology results in greater reliability and exceptional sound quality. The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Primed For Performance!

The Prime R2-750X1 is a full-range class-D mono amplifier, capable of operating at 4Ω, 2Ω or 1Ω mono and rocking 750 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases. Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass to the desired level for your music.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization - and with the included remote level control, you’re in charge of your bass.

Product description

New Rockford Fosgate Prime 1200 Watt Class D 1 channel Amplifier

• The PRIME R1200-1D is an ultra-efficient mono amplifier (1.97" x 6.77" x 11.06") with top mounted controls and delivering 1,200 Watts RMS of power!
• Optimized exclusively for use with subwoofers (RMS Power Output: 400 Watts x 1 @ 4-Ohm OR 800 Watts x 1 @ 2-Ohm OR 1200 Watts x 1 @ 1-Ohm). Average Current Draw (13.8V Music)- 55 A. Max. Current Draw (13.8V Sinewave)- 110 A
• High efficiency, Class D design produces maximum power with minimal strain on the vehicle's electrical system while delivering rich, full bass to any system
• Delivering more bass where you want it most with On-board Punch EQ with +18dB boost @ 45Hz and fine tune the output from the driver’s seat with the included Remote Bass Level Control
• Featuring RCA pass-thru outputs, 12dB/octave Butterworth crossover, infrasonic filter, 4 gauge power/ground connectors, real time output and power supply thermal sensing, and MOSFET power supply
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Hiw much watts will it oush on my L7 the while 1200 or only if i wire l7 to 2ohms it a 4ohm speaker
Answer:	Bumper case. No back.
Question:	Can i use this to power two 10" P3's 4ohm subs? How would i wire it
Answer:	The are all built to the exact same specs so only the colors are different between bags.
Question:	does this come with the remote bass knob
Answer:	I had the same concern, but it hasn't been a problem. The only stain that has been tough to remove was the prune juice that leaked in the backpack. I am absolutely happy with this purchase!
Question:	i have 2 rocksford fosgate p'3s 12in 4 ohms would this amp power both
Answer:	Yes you can! There is an interior padded laptop/tablet (15-16 in) that can also be used as a hydration bladder sleeve. The bag then also has dual Velcro flaps for hydration bladder tube access on either shoulder strap!

Product features

Rockford Fosgate Prime 1,200 Watt Class-D Mono Amplifier

The Prime R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.

The amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system.

Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

• The Punch P300X1 is a small chassis (2.38” x 7.76” x 9.86”) full-range mono amplifier capable of producing 300 Watts into a 2-Ohm load
• Perfect for use as a dedicated subwoofer or center channel amplifier (RMS Power Output: 200 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm)
• RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
• Featuring Class A/B topology, RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Does this amp come with warranty or the rockford fosgate program
Answer:	Yes, you should use CL2 or CL3 wire with these.
Question:	How many watts max
Answer:	You would want to buy out door speakers and a single gang box,and use a volume control knob https://www.amazon.com/gp/aw/d/B000A5S926/ref=mp_s_a_1_sc_2?ie=UTF8&qid=1524106677&sr=1-2-spell&pi=AC_SX236_SY340_FMwebp_QL65&keywords=out+door+patio+speakers PWPBT57
Question:	Will this take 4 gauge wire
Answer:	These speakers operate on 70 Volts as delivered from a stereo amplifier. It is up to your amplifier, 220 volt or 110 volt, to output the correct voltage.
Question:	can i use 1 ohm finally impedance sub
Answer:	Try researching Denon and Yamaha receivers speakers output is only good as your receiver.

Product features

Power & Bass On Demand!

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

Thanks to its small chassis design, it will also fit where traditional amplifiers cannot. Also featuring a top plate design that not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

• The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Is this enough power to run 2 P212s? Or should I go up to the
Answer:	I'm running it with a 1600 watt 12in, I have the power output at a minimum level and it pushes that sub to the limit
Question:	Is this marine grade for an atv
Answer:	This is junk. No power at all is pushed out. I regret it everyday
Question:	Is this good enough for a 10inch p3 4ohm
Answer:	Contact Person Listing the peoduct.
Question:	With 4 8" 4ohm subs what's the best way to hook up? i have 2 subs parallel l/r stereo. is that best
Answer:	This one

Product features

Primed For Performance!

The Prime R2-500X1 is a full-range class-D mono amplifier, capable of operating at 4Ω or 2Ω mono and rocking 500 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases. Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass to the desired level for your music.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization - and with the included remote level control, you’re in charge of your bass.

• The R2-250X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.1") is packed with features and performance to deliver power and bass on demand with 250 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 150 Watts x 1 @ 4Ω OR 250 Watts x 1 @ 2Ω)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Does this amp need to be bridged to get a 2ohm load
Answer:	If they’re dual 2 ohm, wire them in parallel for a 2 ohm load and you’ll be set. Even dual 4 ohm at 1 ohm in parallel will be fine if you don’t turn the gain too far. Don’t pay attention to the max power ratings. Rms power is what you need to pay attention to and use to get the right amplifier. For every subwoofer you have, add the rms together. That’s how much consistent power you need for the two subwoofers which I assume is 800w rms if it’s 2 12” p2s. Have fun.
Question:	Since the amp has 2 speaker terminals which do you use to him up a single subwoofer
Answer:	I would say yes. Amp has plenty of power. I have it on two mofo 15's.
Question:	What wiring kit do I need for this amplifier
Answer:	Ok, disconnect the working amp and connect the non working amp to the working amps wiring. Does the non working amp now work? This will tell you if it's the amp or the wiring. Next check all volumes, left rights, front- rear
Question:	Does it have auto sensing turn on when using high level inputs
Answer:	It all depends on how they are wired. You can wire (2) 4ohm speakers in parallel to drop it to 2 ohms. Them take the positive and negative and connect them “bridged” to the amplifier and you’ll be at 1 ohm. Take (2) 2 ohm subs and wire them the same way and you’ll be at 1/2 ohm and likely blow the amp. I didn’t check the amp but you better verify that it it 1 ohm stable so you don’t blow it at 1 ohm if you plan on waiting it that way.
Question:	I have 2 rockford p2 1600 watts speakers can this amp pump them or should i get something stronger
Answer:	No problem, it pushed 2 American Bass XR15s pretty decent
Question:	can this amp push two 10" R2D
Answer:	Yes
Question:	I have two of these amps. One works just fine the other seems like it isn’t connecting rca. The blue light comes on but no sound
Answer:	Yes
Question:	In order to get this amp working at 1 ohm, do my (2) p3d4-10 subs have to be 2 ohm or 4 ohm
Answer:	No
Question:	can this amp push two skars audio 12 subwoofers
Answer:	/Duration 2:19Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -2:19 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Length = 10.25” Width = 7.375” Height = 2.375”
Question:	Does this come with a warranty
Answer:	Yes it will,modest bass,but if you wanted a bit louder i buy 1 for each sub,i have one sub discus 12 ' half volume with 1.1500 watt mb ,sound clean tigh bass.
Question:	Dose this come with the bass remote. n fuse holder
Answer:	Yes it is correct
Question:	Does the bass knob have a clipping light on it
Answer:	It should fine

Product features

Power & Bass On Demand!

The Punch P1000X1bd is a mono amplifier capable of producing 1,000 Watts into a 1-Ohm load.

Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only.

With its super efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM, producing bass more efficiently over traditional amps. The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Primed For Performance!

The Prime R2-250X1 is a full-range class-D mono amplifier, capable of operating at 4Ω or 2Ω mono and rocking 250 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases. Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass to the desired level for your music.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization - and with the included remote level control, you’re in charge of your bass.

• Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X1 mono amplifier packs a Punch with 300 Watts of power without sucking a lot of juice from your electrical system
• Designed for compact subwoofer systems that requires little space (RMS Power Output: 75 Watts x 1 @ 4-Ohm OR 150 Watts x 1 @ 2-Ohm OR 300 Watts x 1 @ 1-Ohm)
• Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect in motorcycles, ATVs and hybrid-electric vehicles
• Featuring high level inputs, MOSFET output stage, variable 4-6 volt hi level DC offset voltage input turn-on control, and 12dB/octave Butterworth crossover
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
• Mono amplifier with 300W x 1 @ 1-Ohm RMS power rating (150 Watts x 1 @ 2-Ohms, 75 Watts x 1 @ 4-Ohms)
• Designed for a subwoofer system that requires little space--just 1.53 x 4.25 x 6.75 inches

User questions & answers

Question:	Does anyone know the RMS on this amp? Thinking of running it on 2 6x9 Infinities. Thoughts. Does this amp run too hot? Thanks
Answer:	The A & B terminals are connected in parallel internally, so it doesn’t matter which terminals you use. Thanks for your interest in Rockford Fosgate!
Question:	I have a kenwood installed in my 13 road glide. i order some infinity kappas 6.5. how well will this amp work compared to the certain vega b
Answer:	I’m pretty sure it only has one set of speaker terminals, one positive and one negative for one speaker, or however many you want to wire to it.
Question:	I am thinking of purchasing this amp to run (2) infinity kapa 6.5" speakers on my 2016 road glide. will i need to have my infotainment system flashed
Answer:	Are used a four gauge wiring kit so I could easily add another amplifier later
Question:	I want to install this on my bike, but is it marine rated
Answer:	YES! It does! Because you initiated the question, I can offer you a very aggressive price on this unit and all needed install items. Simply text me at 512-750-8726 for a quote. Thanks!!

Product description

Rockford Fosgate Power T500X1BR (300 watts RMS x 1 at 2 ohm) Compact mono subwoofer amplifier + E12SV 12" Single Vented Enclosure + Power T0D412 12" subwoofer (1400 watts peak power) + Installation Wires

• Rockford Fosgate Power T500X1BR Compact Mono Subwoofer Amplifier
• Rockford Fosgate Power T0D412 12" subwoofer (1400 watts peak power)
• E12SV 12" Single Vented Enclosure
• 8 Gauge Amplifier Power Wiring Kit, 17 FOOT RCA CABLE
• Professional Installation is strongly recommended.

• The Punch P500X1bd is a full chassis (2.38” x 7.76” x 11.03”) mono amplifier optimized for subwoofers only, capable of 500 Watts into a 1-Ohm load
• Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm)
• RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
• Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
• Operating Voltage: 9 - 16 VDC

User questions & answers

Question:	Can this power a 600 watts Rockford fosgate p3 1x
Answer:	It's 100 RMS at 4 ohm and 150 RMS at 2 ohm. It is a 2 ohm stable amp. Using it in the fairing of my Harley and no heat issues.
Question:	I have purchased this monoblock. How do I wire it to 1ohm, 2ohms and 4ohms? Wanna try out the difference
Answer:	I've never tried the CV b52 so can't compare. The RF isn't the best amp on the market. But for the money it's not bad. It does run REALLY hot. Never had a problem but being located in the fairing it concerns me.
Question:	How many watts will i get out of this amp if i run it to a kicker 11s12l74 12" 1500w 4-ohm car subwoofer l7 solo baric speaker
Answer:	All the reading I've done in the topic says yes you do. Alternatively you can get a Cyclesounds Magic Box which flattens the signal from your Boombox so you don't need to flash. Be in quick though as it looks like they've stopped making these.
Question:	Can this push a p3 1x
Answer:	This needs to be mounted in a dry location! I have mine on top of my radio inside the fairing on my Streetglide, and I haven't had any issues with it there! There are some aftermarket brackets that work very well for mounting it in that location!

Product features

Power & Bass On Demand!

The Punch P500X1bd is a mono amplifier capable of producing 500 Watts into a 1-Ohm load.

Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only.

With its super efficient Class-BD circuit topology, the P500X1bd will drop some serious BASS! The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Product description

Designed to withstand the elements, the M2-500X1 Element Ready amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.

• The M2-500X1 Element Ready Marine mono amplifier with 500 Watts RMS is packed with all the power and performance you’ve come to expect from Rockford Fosgate (Dimensions: 1.9" x 6.8" x 8.5")
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
• Built for the marine environment, this Element Ready amp features UV resistant protection, conformal coated circuit board, stainless steel mounting hardware and marine grade terminal connections to ensure long lasting outdoor use
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Famous Rockford Fosgate build quality with a full 2-year warranty when purchased from an authorized Rockford Fosgate reseller

Product features

Serious Marine Sound, Made Simple.

Designed to withstand the elements, the M2-500X1 Element Ready mono amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology, which reduces demand on the electrical system.

The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.

The M2-500X1 mono amplifier is ideal for your marine or motorsports adventures, delivering Rockford power to your subwoofer!

Element Ready

The M2 Series amplifiers feature UV resistant protection and special internal conformal coating that protect the electronics from water. These amplifiers are Element Ready, protecting against Dust, UV, Corrosion, and feature Stainless hardware

What's in the Box

• M2 Element Ready Amplifier
• Mounting Hardware
• Allen Wrench
• Remote Level Control (allows you to tune the bass to your desired level)
• 4-pin Molex pig tail connector

P.O.W.E.R. Supply

The Rockford Fosgate P.O.W.E.R. supply generates more power as voltage increases, all while reducing strain on the vehicles charging system, making this amp ideal for Marine and Motorsports vehicles