13 best car audio amplifiers

Product description

Product Highlights: Boost your your speakers with this 1500W Audiobank Stereo amplifier. Its 2 Ohm Stable technology, which uses better circuitry, maintains a clean power output to let your your speakers perform without distortion. The remote sensing capability of this Class-AB amplifier detects the voltage of the connected speaker and switches itself on automatically. Tri-Mode Capable Heavy-Duty Aluminum Alloy Heatsink Class A-B Operation Continuously Variable Low Pass Crossover: 40Hz-300Hz Bass Boost: 0 to + 12dB Continuously Variable Input Gain Control High Pass Crossover: 80Hz-4kHz Nickel Plated RCA and Speaker Level Inputs Remote Turn-On / Turn-Off Circuit MOSFET Pulse Width Modulated Power Supply 2 Ohm Stable Operation & Soft Turn On Circuit Thermal and Speaker Short Protection Circuitry LED Power and Protection Indicators Technical Details: Maximum Output Power : 1500W Power MAX (2 Ohms) : 750W x 2 Power RMS (4 Ohms) : 175W x 2 Bridged Power (4 Ohms) : 1500W x 1 S/N Ratio : 99dB Low Pass Crossover (Variable) : 40Hz-300Hz High Pass Crossover : 80Hz-4kHz Bass Boost (Variable) : 0 -+ 12dB Tri-mode Operation : Yes Inputs : Line Level & Speaker Level Remote Subwoofer Control : No Frequency Response : 20Hz ~ 22kHz THD (at RMS Output) : 0.01% Channel Separation : 90dB Damping Factor : 125+ Fuse Rating : 20A x 2 Dimensions (W x H x D) : 8 x 2 x 11.38 inches

• Channel Separation : 90dB
• Maximum Output Power : 1500W
• Low Pass Crossover (Variable) : 40Hz-300Hz
• S/N Ratio : 99dB
• Tri-mode Operation : Yes

User questions & answers

Question:	does this come with wiring
Answer:	No it doesn't i had to buy all wiring seperately

Product description

Behind every Blaupunkt product is over 90 years of innovation and excellence, and the AMP7502 2-Channel, Full-Range Amplifier embodies just that. With an optimized 160W RMS and 750W output, you can give your audio system the perfect boost in sound. Its slim design fits perfectly into any trunk, so you can easily hook it up to your stereo system.

Amplifier Class: AB

No. of channel: 2/1 Channel

Dimensions: 11.8" x 7.5" x 2.1"

Max. Output Power: 750W x 2

RMS Power (4 Ohms): 160W x 2

RMS Power (2 Ohms): 325W x 2

Frequency Response: 10Hz - 45Hz

Signal-to-Noise Ratio: =>90dB

Voltage Supply: 11 - 16V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 2-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 1

• 750 watt maximum power full-range amplifier
• Amplifier Class: AB
• No. of channel: 2/1 Channel
• Max. Output Power: 750W x 2

User questions & answers

Question:	Is it compatable with 1200 watt alphasonik 10" subwoofer
Answer:	Yes, & that sub isn't "REALLY" 1,200 watts, bridged this amp, with the gains maxed, could prob blow that sub's voice coils with some hip-hop.
Question:	I ordered a amp1501 single channel to put 2 6x9 subs on in my harley, will this give me the bass i need to make them thump
Answer:	It should ,its not enough for my 1100 watt 10" but should drive the 6x9s
Question:	Can i hook up 4 speakers to this amp
Answer:	Yes you could but I recommend getting a 4 channel amplifier which blaupunkt has and you can find it here on Amazon.
Question:	Will this power a couple rockville 600 rms watt each 12" subs in a sealed box
Answer:	No, it's only rated at 750 watts which means it will only support one 600w sub. You will need one blaupunkt 750w amp for each sub woofer.

Product features

AMP7502

Get amped up for the AMP7502 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 2/1 Channel, Max. Output Power: 750W x 2, RMS Power (4 Ohms): 160W x 2, RMS Power (2 Ohms): 325W x 2, Frequency Response: 10Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 16V DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 2 Channel, Crossover Frenquency: 50Hz - 400Hz, Crossover Slope (dB/oct): 8-10dB/oct, Fuse: 30A x 1, Dimension: 11.8 x 7.5 x 2.1in.

Product description

The Audiobank amplifiers are considered to the best car audio amplifiers in the world. They are famous for being excellent with bass and voice. Audiobank amplifiers are excellent in power and reliability compared to anything else on the market in its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Audiobank. It boosts the car audio sound and improves music quality, clarity, and intelligibility. Best Performance, best in budget. Tri-Mode Capable Heavy-Duty Aluminum Alloy Heatsink Class A-B Operation Continuously Variable Low Pass Crossover: 40Hz ~ 180Hz Bass Boost: 0 to + 12dB Remote Subwoofer Level Control Continuously Variable Input Gain Control Nickel Plated RCA and Speaker Level Inputs Remote Turn-On / Turn-Off Circuit MOSFET Pulse Width Modulated Power Supply 1 Ohm Stable Operation & Soft Turn On Circuit Thermal and Speaker Short Protection Circuitry LED Power and Protection Indicators Technical Details: Maximum Output Power : 7000W Power MAX (1 Ohms) : 7000W x 1 Power MAX (2 Ohms) : 4500W x 1 Power MAX (4 Ohms) : 3500W x 1 Bridged Power (4 Ohms) : N/A S/N Ratio : 90dB Low Pass Crossover (Variable) : 40 ~ 180Hz Bass Boost (Variable) : 0 -+ 12dB Tri-mode Operation : Yes Inputs : Line Level & Speaker Level Remote Subwoofer Control : Yes Frequency Response : 17Hz ~ 180Hz THD (at RMS Output) : 0.01% Channel Separation : 90dB Damping Factor : 125+ Fuse Rating : 30A x 3

• 1 Ohm Stable Operation & Soft Turn On Circuit
• Thermal and Speaker Short Protection Circuitry
• Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
• Remote Turn-On / Turn-Off Circuit
• LED Power and Protection Indicators

User questions & answers

Question:	Does this amplifier monoblock put out that type of power
Answer:	There's 3 35 amp fuses. 35 x 3 = 105 amps. 105 x 14.4 = 1497. This amp, will NEVER produce more than 1200 watts of power at 1 ohm. This stuff easy to learn. That being said, this is a killer deal, $115 for 1200 watts RMS is cheap.
Question:	I wont a class d can it be changed now before it shipa
Answer:	Yes it also depends what size speaker sub you’re going with as well as pay attention to the rms on the woofer as well

Product description

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms

• 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm
• Accepts High Level & RCA Level Input; Remote PLC (Punch Level Control) - Sub Channel
• Cast aluminum heatsink with Top Mount Controls
• 12dB/octave crossover. MOSFET power supply
• 4 Gauge power/ground connectors. The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

User questions & answers

Question:	I see two high level inputs not three. if my stereo doesnt have any rca output how can i connect the subwoofer too
Answer:	It has a built in crossover, no need to worry about a sub-input.
Question:	Is the Rockford R600X5 a good choice for two sets of JBL speakers (5.25 component and 6x9) rated at 75w RMS each at 2ohm AND a Sub rated at 300w RSM
Answer:	According to their website, this would be a good choice of power for the speakers. 75wrms @ 2Ohm for each speaker and 300wrms @ 2 ohm for the sub. Make sure that the sub is 2Ohm, though. When you receive the amp it will come with a QC sheet explaining each power rating. Just make sure you tune it properly and it will work well. http://www.rockfordfosgate.com/products/details/r600x5
Question:	does it come with whatever wires you need
Answer:	You will need an amp install kit for the recommended gauge.
Question:	The remote for the sub comes stock with this? I don't need to order it separate like amazon is suggesting
Answer:	The base remote comes with this amp

Product features

Prime 600 Watt 5-Channel Amplifier

Overview:

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

Technologies:

Class A/B

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Class D

High efficiency amplifier design that reduces current consumption from the charging system.

Product description

Specification:

Name: Car Amplifier

Channel: 4

Material: Matal

Color: Black

Size: 32x24x4.5 (cm)

Voltage: 12V

Input Resistance: 4Ω

Input Sensitivity: 92db

High Pass Frequency: 32-2KHZ

Low Pass Frequency: 32-300HZ

Peak power: 5800W

Rated power: 4*120W



Package Include:

1 x 4 Channel Car Amplifier

• High-precision metal casing, streamlined protection structure, improved work-discharge thermal conductivity and high-quality heat dissipation performance, enabling the power amplifier to work stably for a long time and at high power.
• High-density pure copper three-color large circulation, smaller size, higher power, make more reasonable adjustments to the power demand of the power amplifier, to ensure safe, efficient, continuous and stable operation of the power amplifier.
• With short circuit, overload, overheat protection.
• Equipped with efficient heat dissipation all aluminum pits.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Class Ab Bridgeable Variable Input Voltage (Quick Thermal Dispersion) Technology Heat Sink Low-Noise Preamp High-Level Inputs Low-Level RCA Inputs & Outputs 2- & 3-Channel Operation Modes Built-In Variable Electronic Crossover 

• (Quick Thermal Dispersion) technology heat sink Low-noise preamp
• High-level inputs
• Low-level RCA inputs & outputs

User questions & answers

Question:	Will theses power 4 door speakers? Not sure how all this works. Just heard that door speakers sound better with an amp
Answer:	Yes, in fact that's exactly what this amp is designed to do. You'll get beautiful sound and the fader control on the head unit will work. Unit allows you to hook up high level, (speaker wires from deck), or low level RCA inputs.
Question:	I bought Scosche speakers from walmart. Will this work those
Answer:	I have four of them 6by8 200 watts n a 400 watt sub 8 sounds ok with out the amp in a town car ....but will this amp push all 5 speakers??? Those come in 300 watts 6/9 ...and 200 watts 6/8
Question:	Will this power 4 100 watt 6x9 and a sub
Answer:	2 months ago I hooked this amp up in a 66 mustang a pair of 6x9 and 3.5 on channel 1&2 using the high pass filter and a pair of 10" Crwin Vega DVC wired down to 2 ohms each. one on channel 3 and the other on channel 4 using the low pass filter. I was very surprised by the sound. Great bass sound and clear sound. It is not competition grade by any stretch of the imagination, but it does give some great bass sound and rattles the mirrors. i was waiting to write a review until it had some time to prove itself. My friend is very happy with it, doesn't want a second amp for bass. Use the right size power wires and you will be happy.
Question:	How many ohms per channel
Answer:	4 ohms, but it's 2 ohms stable and is okay to hook up that way, according to the directions.

Product description

The Blaupunkt 1500W 4-Channel, Full-Range Amplifier (AMP1504) embodies over 90 years of innovation and excellence in Blaupunkt products, making it the perfect amplifier to install into your motor vehicle. With an optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road. This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system. Get amped up for the Blaupunkt 1500 Watts 4-Channel, Full-Range Amplifier (AMP1504) and take your car to the next level.

Amplifier Class: AB

No of channel: 4/3/2 Channel

Max. Output Power: 1500W x 4

RMS Power (4 Ohms): 150W x 4

RMS Power (2 Ohms): 300W x 4

Frequency Response: 10Hz - 45Hz

Signal-To- Noise Ratio: =>90dB

Voltage Supply: 11 - 15V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 4-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 2

Dimension: 8.6" x 7.5" x 2.1"

• 1500W Maximum Power Full-Range Amplifier
• Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
• This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

User questions & answers

Question:	I have a couple 6x9 and a box with separate chambers for 8” subs any pros or cons
Answer:	The amplifier runs warm in high pass so it will probably run hot but does have thermal protection circuitry and will reset but wouldn't advise running it like that!!!
Question:	It quit working with in 10 minutes. It has a red fault light not green. I disconnected the speaker wires killed power turned on still red . What to do
Answer:	Make sure power lines and especially a ground wire is hooked up properly. That's the main thing ground is very important that's actually touching metal the car itself. And none of the speaker wires are shorting out
Question:	Does this amplifier support bluetooth operation
Answer:	No it doesn’t..... I bought this same 1500 watt full range amp and tried to get in touch with Blaupunkt for some tech questions I had, GOOD LUCK WITH THAT!!!! Apparently Blaupunkt amps are not associated with or made at same place as All other Blaupunkt audio units & products, search it on internet
Question:	how many true watts does a 1000 x 4channel amp actually put out
Answer:	I'll post a link to a youtube video where this amp was put on the Amp Dyno but if you don't feel like watching it the results were 65- 71 per channel (cea certified) @ 4 ohm @ 14.56V. Keep in mind those numbers will drop when an amp is installed in a car because your only going to about 13.4 to 13.9 V to the amp and that"s if everything is the right size and grounded properly. As a rule of thumb a single 30-amp fuse means that the amplifier can produce 300 watts of power at most. A60 amp fuse will make 600 watts plus or minus 10-20 depending on the quality of the amp. The quality of this amp is crap it may have 2 30A fuses but makes no where near that power. At 2 ohms it makes about 100 watts per channel. The 2 30A fuses making 600 watts doesn't account for the total efficiency. This amp is about 70 efficient which is awful ! If you plan on using this to power 4 door speaker at 4 ohms 65-70 watts it will work just fine because guess what those 6.5" 500 watt speakers lied about the power handling too. If your not very familiar with car amps and want to know if your getting a deal or ripped off watch this guys videos, https://www.youtube.com/watch?v=FbA2Vdg3uSo thats for this amp and 2 other Bloujunk amps. If you're looking for a budget amp that puts out like a prom date, 1100 watts @ 1 ohm (2 ohm DVC sub) for $104 check out his video of a dyno drag race the Ignite R3000/1D vs the 2nd best budget monoblock amp the BOSS AR4000D. https://www.youtube.com/watch?v=UvHWxhm7Eog&t=630s My advice buy the Ignite and the warranty Amazon sells for $20 so you know your going to get 2-3 years of worry free ownership.

Product features

AMP1504

Get amped up for the AMP1504 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 4/3/2 Channel, Max. Output Power: 1500W x 4, RMS Power (4 Ohms): 150W x 4, RMS Power (2 Ohms): 300W x 4, Frequency Response: 1 0Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 1 SV DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 4 Channel, Crossover Frenquency: S0Hz - 400Hz, Crossover Slope (dB/act): 8-1 0dB/oct, Fuse: 30A x 2, Dimensions: 8.6 x 7.5 x 2.1 in.

Product description

Get the compact stability and great sound of the Planet Audio Pulse PL4000.1D Monoblock Class D Amplifier. This powerful 1-Ohm stable Amplifier features 4000 Watts Max Power with a MOSFET power supply to give your music a boost. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Switchable Phase Control. Tweak the levels with the Remote Subwoofer Control. For double the performance and power, strap on another PL4000.1D for a total power of 8000 Watts @2-Ohms. When space is limited but your passion for great sound is not, Pulse Amplifiers with blue illuminated end panel strips and logo are just what the doctor ordered to power up your music and get your heartbeat racing. Drive your tunes with the Planet Audio PL4000.1D.



For further product details, please scroll down.

• Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms, 8000 Watts Max x 1 @2-Ohms strapped
• MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two PL4000.1D amplifiers and double the power that is being sent to your subwoofers. You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Can this amp keep up 3 skars vvx-8v3 8" 800w
Answer:	Dont know mine was fried when I got it
Question:	Will this amp push my 15in power Acoustik 3900 watts and 1900rms
Answer:	The PL4000.1D should work with your setup. Thank you.
Question:	Acabo de pedir este amplificador y mi duda es si podre conectar mis 2 subwoofer ac12d 1800 w cada 1 conectados en paralelo
Answer:	Si es muy buena idea
Question:	Will this amp push 2 15" american bass subs in a probox
Answer:	This amp can produce a maximum of somewhere around 1500 watts RMS at 1 ohm. Compare that with the max RMS rating of your 2 subs. The seller is full of crap, it's impossible to produce more than 1728 watts RMS with a max input amperage of 120amps.

Product features

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Pre-Amp Outputs and Low Level Inputs

This unit's Pre-Amp outputs let you expand your system by adding one amp or signal processor.

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Short Protection and Phase Control

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Variable Input Control and Switchable Input Sensitivity

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

LED Illuminated Logo and End Panels

The Planet Audio Logo has blue backlit illumination and the End Panels have blue illuminated light strips.

Product description

1600 Watt 4-Channel Amplifier

• Blaupunkt AMP1604 4-Channel, Full-Range Amplifier Max. Output Power: 1600W
• RMS Power (4 Ohms): 55W x 4 - RMS Power (2 Ohms): 79W x 4
• Frequency Response: 10Hz - 30Hz
• Crossover Frequency: 50Hz - 250Hz - Crossover Slope (dB/oct): 8-10dB/oct
• Signal-To- Noise Ratio: =>96dB

User questions & answers

Question:	Dose it have a high pass input
Answer:	yes
Question:	Is this amp bridgeable
Answer:	Yes it is bridgeable but it doesn't push near as much power as it claims I'm using it to run mids and highs and it does fine but it's literally only pushing about maybe 75 watts per channel
Question:	Is this good for mids and highs
Answer:	extremely good! im using this for the doors in a subaru... and it is quite fantastic!
Question:	Speaker level inputs
Answer:	this amp has 4 channels of standard RCA inputs (2 front , 2 rear) also, there is a dongle in the box that connects directly to Hi-pass signal from the speaker wires (like a line out converter). (hi-pass input) - there are 2 of these.. one for front, one for rear. i think this is what you are asking for clarification on

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Power up your music on the trails with the Boss Audio Riot R1004 4 Channel Class A/B Amplifier. This 2-Ohm stable Amplifier features 400 Watts Max Power with a MOSFET power supply to get your music in gear. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price. Get better sound with the Boss Audio R1004. For further product details, please scroll down.

• Power - 100 Watts Max x 4 @2-Ohms, 50 Watts Max x 4 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.1 lbs.
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It will with ok sound quality if it's for inside the car listening pleasures. However getting another one and bridging it or a higher powered amp for a good baseline would be recommended.
Question:	Can you support two 10" subs with this one amp
Answer:	Hello. Yes, this amplifier will support two subwoofers. You will need to make sure that each subwoofer does not exceed 400 watts peak power.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	Hello. I would recommend purchasing a monoblock amplifier to power your subwoofer. The R4004 is a 4 channel amplifier that would work better for your speakers.
Question:	whats rhe size of the amplifier
Answer:	Dimensions of the R4002 are 10.79" x 10.43" x 2.25".
Question:	Can I run a chuchero and a subwoofer
Answer:	Yes
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.
Question:	Bluetooth version? AptX features
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	Hi, it is a class D amplifier. Thank you.

Product features

Clear Sound

Get clear sound on the trails with the Boss Audio R1004 4 Channel Class A/B Amplifier. With 400 Watts Max Power and MOSFET power supply, this 2-Ohm Amplifier gives your music a boost. Amplifiers in the Riot Series are perfect for first time car audio buyers looking for enhanced sound and performance for their system at an affordable price.

Mosfet and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

• Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
• Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
• Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
• MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
• 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected

Product features

CT Sounds CT-2000.1D Compact Car Amplifier

CT Sounds engineered the CT-2000.1D Monoblock Car Audio Amplifier for those looking for a reliable, efficient, and compact car amplifier that won’t destroy your wallet. This car amplifier class d is built with a MOSFET power supply, high-quality capacitors, advanced transformers, and cutting-edge inductors allowing for maximum current flow and power output making this amplifier extremely efficient.

Bring your bass alive!

CT Sounds designed the CT-2000.1D car monoblock amplifier for anyone in need of a mono amp that fits just about anywhere in your vehicle without having to sacrifice power. The user-adjustable controls feature a Gain Control, Low Pass Filter (LPF), Subsonic Filter, and Bass Boost so that you can get the exact sound you are looking for out of your mono amplifier. If you want a monoblock car amplifier that absolutely pounds and delivers clean power to your subwoofers then look no further than the CT-2000.1D.