14 best car amps

Product description

Soundstream BXA1-10000D Monoblock 3300W RMS 10000W Max Bass Equalizer Class D Amplifier

• Digital Bass Reconstruction Processor Built-in
• Dimensions: 8. 125" W x 2. 125" H x 19. 75" L
• Adds Impact to Music w/ Insufficient Sub Bass
• 27Hz-63Hz Variable Center/Sweep Frequency
• Variable Q/Width to Broaden or Narrow the Bandwidth
• 2. 5V-10V Output Voltage for Optimum Bass Tuning
• LED MAX BASS Indicators Warning of Extreme Levels

User questions & answers

Question:	Will this amp push 2 15 inch eclipse
Answer:	The ASRock Z77 Supports Dual Channel DDR3 2800+(OC). You will want to kick your choice of RAM up a notch or two. You would really be putting the breaks on that most excellent motherboard. I have this RAM running in my ASRock Micro ATX 970M Pro3 and its doing a fine job.
Question:	Will this amp push two rockville destroyer 12 inch
Answer:	They will work great as long as you have 4 available slots.
Question:	Is this to much for a pair of rockville destroyers 12d2's
Answer:	Hello Jed,I'm Jewel with Kingston Technical Support, here to address your question. The 2013 Mac Pro requires DDR3-1866 ECC memory. Our HyperX Fury memory is non-ECC and would not work properly in that system. The compatible 8GB part number is KTA-MP318E/8G. For any further questions or concerns, please call us at 1-800-435-0640 (USA and Canada only) M - F 6am - 6pm PT and I or another available Technician will assist you.Thank you for selecting Kingston as your upgrade partner.
Question:	Will this amp push two Rockville punisher 15’s
Answer:	I have an Asus z97 motherboard with a Cooler Master Hyper 212 Evo and the ram fit perfectly in place. I have 4x8 16gb of Kingston HyperX (filling all the DIMM slots) and they fit fine.

• Efficient Class-D amplifier
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• Variable 12dB crossovers provides control to dial in perfect sound
• 24dB subsonic filter for protection from potentially damaging frequencies

User questions & answers

Question:	Is this amp good for. Two 15 inch solo barrick kickers
Answer:	I would say yes
Question:	Can thiis amp handle 2 kicker cvrs 15inch
Answer:	If the fuel line has same fuel line coupling then yes >I can only say it worked on my F150 very well
Question:	Will this work for 3 10inch kicker rt at 1ohm
Answer:	This product fits 3/8” & 5/16” fuel lines. I bought this tool specifically for a 2006 F-350. If you add your vehicle to the Amazon garage, it should give you product that fit your vehicle.
Question:	Would this amp be perfect paired with the solo baric L7 12" single sub @2ohm 750 rms 1500 peak
Answer:	It's a set there should be no problem

Product features

CX Amplifiers

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility, and true reliability!

Control It

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

One Ohm Stable

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Towers of Power

CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!

Incredible Sound Everywhere

KICKER’s CX-Series amplifier technology provides clean, powerful music in nearly any vehicle on the road today, without changing your radio or adding a line-out converter. These powerful amps work with as little as nine volts of power from your battery and as much as 40 volts (400 watts) of speaker-level input signal. With KICKER’s FIT+ (Fail-safe Integration Technology-PLUS), you get outstanding noise rejection - even with premium factory audio systems.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Get your music thumping with the Planet Audio pulse PL1500. 1M Class A/B amplifier. This powerful 2-ohm stable amplifier features 1500 Watts Max power with a MOSFET power supply to pump out your playlists. Customize the sound with variable low pass Crossover and switchable bass Boost. Tweak the levels with the remote subwoofer control. When space is limited but your passion for great sound is not, pulse amplifiers with blue illuminated End panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing. Put your tunes in gear with the Planet Audio PL1500. 1M. For further product details, please scroll down.

• Power - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• Specs - Dimensions: 10” x 7” x 2.4”, Weight: 4.9 lbs.

User questions & answers

Question:	Will this fit a 1999 ford ranger
Answer:	This amplifier doesn't have the power for these type of subwoofers. You run the risk of th e amp over heating or going into protect mode
Question:	Will this amp push 2 15inch kicker cvrs 2ohm subs
Answer:	hi its fred this amplifer is great but at 2 ohms it put max 1000 watts rms max max.
Question:	Will this power an kenwood kfc-w3016ps 12-inch 2000-watt subwoofer
Answer:	Evolution Series Single-Channel Class D Car AmplifierRMS Power Rating:4 ohms: 1600 watts x 1 chan.Max power output:2 ohms: 3000 watts x 1 chan.1 ohm: 4000 watts x 1 chan.This is the specs of tgis amp but I dont believe they are this amp sucks a lot it blow up on me
Question:	What size fuse comes on the amp
Answer:	I don't know the gauge wire but it's what you find in most amp kits , I have mine pushing a set of 15 in. Kickers also a set of 12 in. Pr3 it pushes them easily .

Product features

Style and Sound

Feel the beat with the Planet Audio Pulse PL1500.1M Class A/B Monoblock Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier gets your music in gear.

Customize the sound with Variable Low Pass Crossover, Switchable Bass Boost and Remote Subwoofer Control.

When space is limited but your passion for great sound is not, Pulse Amplifiers with blue illuminated end panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

The Rockville RV12.2B Dual 12" 1200 Watt Vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. Most packages that have a 2 Channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings.

• Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
• Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
• Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
• 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
• 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder

User questions & answers

Question:	Are they wired series or parallel
Answer:	Series
Question:	can i use the amp with 2 Dual 12 inch speakers
Answer:	Yes you can. Just ensure that the amp is mounted where it can get some flow of air
Question:	Will it work with a 2002 Toyota Highlander with stock stereo
Answer:	Of course any system can work with a stock stereo just make just you know how to install or get a professional
Question:	I plugged and wired everything up correctly and it doesn’t work!!! Can someone please help me
Answer:	did you test it before you put everything back in? after you wire everything you should just hook the speakers up and test them to make sure you're good... if you aren't getting any power i would check your wiring and make sure the ground is good.. and everything is up to par.. if your stereo doesn't have power either then you should make sure it's connected properly to the harness.. Make sure your wires are color matched properly.. make sure you have the right wiring harness for your car... ask the question again with more details if you haven't already fixed it.... installed these and they work beautifully

Product features

Rockville RV12.2B 1200w Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

The Rockville RV12.2B Dual 12" 1200 watt vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. most packages that have a 2 channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings. CEA-2006 compliant means that these are tested and rated by the same industry standards used by other famous brands like Kenwood, Sony, Kicker, etc. The subwoofers in this package are of superior quality. They feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features.The distinct advantage of the Rockville Bass Packages are that our systems from the woofers to the enclosures and amplifiers were all designed and engineered from scratch to work specifically together as a system. We tested these for months to ensure these met our rigorous quality standards. The final result is a super efficient bass response with loud, deep and clean sound.

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

The brand is dedicated to creating the finest pieces of mobile electronics that bring terrific value and suit to today’s busy lifestyles. For decades these guiding principles has remained unchanged. Power Acoustik stands at the modern-edge of the audio/video product evolution with an intense R&D as well as continuous improvement of its existing designs. Year in and year out, Power Acoustik creates more high-end mobile electronic products that offer a host of state-of-the-art features that supersede previous models, as well as your expectations. Out-of-the-box thinking, innovation in design and features are what sets Power Acoustik the head and shoulders above the rest.

• Class D Full Range Amplifier
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged
• MOSFET Power Supply with Audiophile Grade IR Transistors
• Military Grade SMT PCB
• Maintains Dynamic Performance

User questions & answers

Question:	Will this amp push 2 12"boss phantoms?1050 rms each sub
Answer:	1 but it pushes my 2 15 good
Question:	What gauge wire does this amp take
Answer:	Yeah but the wire they send you doenst plug into the amp
Question:	Is it bridgeable
Answer:	Most definitely. When this Amp is wired correctly, it's amazing. If your woofers are duel 4ohm, wire each one at 2ohms X 2 would be 1ohm =3500w. If they are single voice coil 4ohm, wired together is 2ohm. I'm pretty sure that's 2400w at 2ohms
Question:	Is it 1 ohm stable? The description only mentions 2 and 4 ohms
Answer:	4 gauge is the correct size and is also what is recommended in the owners manual.it states 4 gauge on page 7.

Product description

The Autotek MM1220.2 The Mean Machine 1,200 Watt 2 Channel Class AB Car Amplifier brings extreme power with Pro-Fi high speed MOSFETS and high sound quality with minimum distortion levels. The MM1220.2 features 1,200 watts of power in a bridgeable 2 channel Class AB amplifier with a large heat sink, providing very musical bass with dramatically reduced noise. The amplifier can be run from the output RCA connections which minimize the need for additional cables running the length of the vehicle.

• 1,200 watts mono bridged @ 4 ohms
• 300 watts x 2 @ 4 ohms
• 600 watts x 2 @ 2 ohms
• 0 to 9 dB bass boost
• Road Worthy TCID (Twin Coil Isolation Design) and Pro-Fi High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels

User questions & answers

Question:	Will it run one 10" 1200 watt sub
Answer:	Hello, kindly check the link, this is how to reconnect trolling motor with remote control, youtube.com/watch?v=hTs-GjmMrbg if it is still not working, would you like to contact Alice with "[email protected]" and tell me the order ID? After confirmation, I will provide the suitable solution to you.
Question:	Rms rating of amp
Answer:	hello, under the full speed, it is about 45A

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

• Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (74.1% efficient), 2 Ohm: 600 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (84.5% effic
• Peak: 4000 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating), High-Speed MOSFET Power Supply, Class D Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Phase Control Switch, Full IC-Controlled Protection Circuitry, Adjustable 0-18dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%
• S/N Ratio: >90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours straight, Extruded aluminum heatsink, Frequency Response: 10Hz - 300Hz
• Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money, Dimensions: (L x W x H) 14" x 8.5" x 2.24", Weight:7.8 lbs

User questions & answers

Question:	How long till ship
Answer:	YES totally we have it with 3 separate volume controls wall
Question:	How do I hook up 0 gauge wire? Is there special connectors I need
Answer:	You need 70 volt speakers. These look like 8 ohm speakers
Question:	Can this power a 1ohm skar audio sdr 12 or is there a better amp to power my sub
Answer:	No. Like most 70v amps, it can only output mono.
Question:	Is this amp safe to use with one Kicker L7 12" solar baric
Answer:	Hi, the Bluetooth or Blue will appear on the screen once you use Bluetooth input. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PT6060CHAE. Thank you.

Product features

Rockville RVA-M3 4000w Peak/1000w RMS @ 1 Ohm Amplifier Mono Car Amp+Remote

Product description

Audiobank Monoblock 2000 WATTS Amp Class AB Car Audio Stereo Amplifier P2001 Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation Remote On / Off Circuit The Audiobank amplifiers are considered to the best car audio amplifiers in the world. They are famous for being excellent with bass and voice. Audiobank amplifiers are excellent in power and reliability compared to anything else on the market in its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Audiobank. It boosts the car audio sound and improves music quality, clarity, and intelligibility. Best Performance, best in budget. Audiobank Monoblock 2000 WATTS Amp Class AB Car Audio Stereo Amplifier P2001 has 2 Ohm Stable Operation & Soft Turn On Circuit, Thermal and Speaker Short Protection Circuitry Heavy-Duty Aluminum Alloy Heatsink Class A-B Operation Remote Turn-On / Turn-Off Circuit LED Power and Protection Indicators. Our customers are love it and we are getting good reviews and feedback from them.

• 2 Ohm Stable Operation & Soft Turn On Circuit
• Thermal and Speaker Short Protection Circuitry
• Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
• Remote Turn-On / Turn-Off Circuit
• LED Power and Protection Indicators

Product description

Class Ab Bridgeable Variable Input Voltage (Quick Thermal Dispersion) Technology Heat Sink Low-Noise Preamp High-Level Inputs Low-Level RCA Inputs & Outputs 2- & 3-Channel Operation Modes Built-In Variable Electronic Crossover 

• (Quick Thermal Dispersion) technology heat sink Low-noise preamp
• High-level inputs
• Low-level RCA inputs & outputs

User questions & answers

Question:	Will theses power 4 door speakers? Not sure how all this works. Just heard that door speakers sound better with an amp
Answer:	Yes, in fact that's exactly what this amp is designed to do. You'll get beautiful sound and the fader control on the head unit will work. Unit allows you to hook up high level, (speaker wires from deck), or low level RCA inputs.
Question:	I bought Scosche speakers from walmart. Will this work those
Answer:	I have four of them 6by8 200 watts n a 400 watt sub 8 sounds ok with out the amp in a town car ....but will this amp push all 5 speakers??? Those come in 300 watts 6/9 ...and 200 watts 6/8
Question:	Will this power 4 100 watt 6x9 and a sub
Answer:	2 months ago I hooked this amp up in a 66 mustang a pair of 6x9 and 3.5 on channel 1&2 using the high pass filter and a pair of 10" Crwin Vega DVC wired down to 2 ohms each. one on channel 3 and the other on channel 4 using the low pass filter. I was very surprised by the sound. Great bass sound and clear sound. It is not competition grade by any stretch of the imagination, but it does give some great bass sound and rattles the mirrors. i was waiting to write a review until it had some time to prove itself. My friend is very happy with it, doesn't want a second amp for bass. Use the right size power wires and you will be happy.
Question:	How many ohms per channel
Answer:	4 ohms, but it's 2 ohms stable and is okay to hook up that way, according to the directions.

Product description

Break out the Bass with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 1500 Watts Max Power with a MOSFET power supply to drive your tunes to the limit. Customize the sound with Variable Low Pass Crossover and Bass Boost. Unleash the Bass with the Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Enjoy music on your terms with the Planet Audio AC1500.1M. For more product details, please scroll down.

• power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
• low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
• low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
• variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	What amp will do for 3 fusion
Answer:	200 watts
Question:	I cancled my order for an amp by mistake what can we do? I still want the order
Answer:	It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up.
Question:	Does this one come with a bass knob
Answer:	Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!!
Question:	is this amp enough to power 1 pioneer tsw307d2 at 4ohms or 1 pioneer tsw3002d4 at 2ohm? I have 1 of each subs so whatever is best
Answer:	Hello Robert, We do offer some great 15 inch speakers like the AC15D, but I would recommend the BBD12 as our best speaker. Thank you.

Product features

Control Your Sound

Make your own music rules with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier lets you set your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Product description

Warzone 5000W class D amp 1/2/4 ohm stable with Remote sub control

• 5000W Max Class D @ 1 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included
• S/N Ratio > 70 dB with Frequency Response at 8 Hz ~ 180 Hz and THD < 0.2%
• Bass Boost Level 0 ~ 12 dB with LPF 40 Hz ~ 180 Hz and Subsonic Filter 0 ~ 50 Hz
• High and Low Level Inputs, Variable Low Pass Crossover, Variable Bass Boost
• Dimension ( L×W×H ): 351.5 mm (13.8 in) × 211 mm (8.3 in) × 64.5 mm (2.5 in)

User questions & answers

Question:	Anybody know the rms rating for the gravity audio wz5000.1d warzone
Answer:	@ what ohms?
Question:	Does it get hot fast or at all
Answer:	No
Question:	will this amp push American bass 15 3500 rms
Answer:	Probably not unless dropped to 1ohm
Question:	RMS at 1 ohm
Answer:	5000 watts