11 best boss audio amp wiring kits

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

• Wiring Installation Kit includes: 30 ft. speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga Black ground cable, competition quality fuse holder with agu fuse
• WIRING INSTALLATION KIT CONTINUED: 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
• Amplifier power: 1500 watts Max X 1 @2-ohms, 750 watts Max X 1 @4-ohms
• Class A/B topology: class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet power supply: a MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• SPECS: The AR1500M amplifier is 10. 3” x 6. 5” x 2. 6”, 7. 5 lbs.
• Variable low-pass Crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	Viene incluido con el controlador de subwoofer
Answer:	yes
Question:	im using my factory stereo, do i need a specific high/low converter for this Amp? if so, which one
Answer:	It looks like it should be the side that is actually the swivel of the screen: it looks like a latch. But the other side is what opens up. I was puzzled when I first tried and was glad I didn’t break it by continuing to open the false side.
Question:	Can this amp run 2 kenwood kfc-w3016ps 12-inch 2000w
Answer:	Can it be turned on when you plug in the wall charger? If it still doesn't work, please contact us for after-sales support, you may send an email to ‘[email protected]’ with your order ID. Thank you.
Question:	will this work on 2 12'' Pyle PLBW124 1,200-Watt DVC Subwoofer
Answer:	Yes, it does. The portable DVD comes with a canvas headrest mount holder.

Product features

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

The Boss R1004 4 channel amplifier features a MAX power handling of 400 watts and a RMS power handling of 50 watts. The Class A/B circuit design runs cooler and more efficiently with low distortion and high reliability. This class is intermediate between Class A and B, with the two active elements conducting more than half of the time which are best used for speakers. Other features include a Hi/Low pass crossover, a variable bass boost and is 2-ohm stable. Trimode Capable 2 Ohm Stable Signal to Noise Ratio: >95 dB KIT2 Complete your car audio set up with ease thanks to the included BOSS Audio Systems KIT2 8-Gauge Complete Car Amplifier Installation Wiring Kit. The Boss KIT2 8-Gauge Complete Car Amplifier Wiring Kit has everything your need to wire your car audio system. This wiring kit features a 20-foot, 8-gauge red power cable, competition high-quality fuse holder, 3-feet of 8-gauge black ground cable, 16-feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect, 30-feet of speaker wire, 6-feet of split loom tubing, (20) 4-inch wire ties, rubber grommets, a #10 ring terminal, a 5/16-inch ring terminal, and a 1/4-inch ring terminal. Give your car audio system the best wire available and get your system up and running with the BOSS KIT2 8-Gauge Complete Car Amplifier Wiring Kit.

• Boss Audio Riot R1004 400W 4 Channel Car Power Amplifier Amp Mosfet Transister
• RMS Power:
• 50 Watt x 4 Channel
• Max Power:
• 100 Watt x 4 Channel

Product description

The **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts! This Class A/B amplifier features a MOSFET power supply, an impedance of 2 ohms, a line output, low pass crossover, and an illuminated Boss logo. This package also includes the Boss KIT2 8 Gauge Ga Car Amplifier Amp Complete Kit Wiring Installation+RCA.

• **Amplifier:**
• NEW **BOSS R1100M** 1100W Mono Car Audio Amplifier + BOSS 8 Gauge Amp Wiring Kit
• 1100 Watt Max
• Max Power: 1100 Watt x 1 Channel @ 2 Ohm
• RMS Power: 250 Watt x 1 Channel @ 4 Ohm

User questions & answers

Question:	would this work for a single 12 inch 300-600 watt sub
Answer:	Yes
Question:	Will this work with a 10" 300 watt RMS subwoofer
Answer:	Yes. I am running a 300 watt 10. It has a dial for on the fly Bass power adjustments too.
Question:	How hard is it to hook up the remote sub level control
Answer:	It's easy plug it in put 0-18db to 18db full to low and level all the way up sensitivity 2-8v to 8v and frequency adjust to you want that's it !!
Question:	This product needs capacitor?in case yes, how many farad? Thanks
Answer:	Its not a must

Product description

This Package Includes: 1 x Boss Audio R1100M 1100 Watt Amplifier 1 x 4 Gauge Wiring Kit The **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts! This Class A/B amplifier features a MOSFET power supply, an impedance of 2 ohms, a line output, low pass crossover, and an illuminated Boss logo! The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier is the perfect amp to power your car audio system! RMS Power: 250 Watt x 1 Channel @ 4 Ohm Boss Illuminated Logo Class A/B

• **Amplifier**
• NEW **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier
• 1100 Watt Max
• Max Power: 1100 Watt x 1 Channel @ 2 Ohm
• RMS Power: 250 Watt x 1 Channel @ 4 Ohm

User questions & answers

Question:	Would a 12" kicker sub and 2 2-way 6.5" kicker speakers be too much for this amp
Answer:	I believe it comes with a metal disk in the bottom, no extras, but it sure has lasted a long time, can not find a place to buy the little discs,. We used to just change the disc, but these are cheap enough and they last.
Question:	Im new to the audio stuff. But is this all the wiring i need to hook up the sub and amp
Answer:	No it was not made to use in a bath tub for many reasons.. Electric shock being the big one.. Second it only works in shallow water. And you bath soap and products would clog and ruin the unit. Cool ides thought . Some one needs to make such for the tub.

Product description

BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control

• Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
• Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
• Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	Can you shut off the badge lights
Answer:	Not to my knowledge. Not unless you open it up and disconnect the power line feeding the light.
Question:	Por que tan caro el derecho de exportación
Answer:	lo traje a bogota colombian no por el servicio de mensajeria de amazon por que sale muy caro lo traje por un casillero virtual que ofrese la emresa 4-72 y salio por como por 30 dolares
Question:	Quiero una pero que sea de bajo 2000 Wats
Answer:	Ayuda mucho buscando el real sonido
Question:	Is these good for a Subaru tribecca 2007.? I will use 400 watts speakers
Answer:	Yes should work fine

Product features

Let The BASS Take You To Another Place

Enjoy clear sound with the BOSS Audio Riot R1100MK Monoblock Class A/B Amplifier and 8-gauge wire installation kit. With 1100 Watts Max Power and MOSFET power supply, this 4-Ohm Amplifier provides clean sound to give your music an extra boost. The included amplifier installation kit gives you everything that you need to bring power to your subwoofer. Riot amplifiers are great for enhanced sound and performance for all 12V applications at an affordable price.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

• 17 Feet 4 AWG 1862 Strands Ultra Flex Red CCA(Copper Clad Aluminum) Power Wire/3 Feet 4 AWG 1862 Strands Ultra Flex Black CCA Ground Wire
• 18 Feet 16 AWG CCA Speaker Wire/18 Ft.- 18 Gauge blue Remote Turn-On Wire
• One 17 Feet Black Bassik RCA Cable made from Oxygen Free Copper (OFC)
• Heat Tested, Water Resistent InLine Fuse Holder/ 80 Amp AGU fuse
• Connecting Terminals And Accessories

User questions & answers

Question:	Will this kit work for installing rockford fosgate pbr300x4 4 channel car amplifier
Answer:	Yes, everything is ready for installation.
Question:	Will this work on a 2000 watt amp
Answer:	12×18×4×6
Question:	Will this work on a 400watt marine amplifier
Answer:	Yes it will, I mount the amp on a side of the box. And it fit perfectly.
Question:	For how many watts is this kit good for
Answer:	I don’t really remember. Maybe like 12 or 15 feet.

Product features

POWER CABLE

17FT 4 AWG CCA POWER CABLE

ture awg second generation cca for maximum power delivery

3FT 4 AWG CCA GROUND CABLE

Completes circuit for unimpeded current flow

18FT 16AWG CCA SPEAKER CABLE

Transfer clear and powerful sound

17FT TWISTED OFC RCA CABLE

made from Oxygen Free Copper (OFC) rejects noise for clear sound

1 INLINE FUSE HOLDER WITH 80 AMP FUSE

For superior protection against electrical shorts

17FT 18 AWG TURN-ON WIRE

Remotely switches on amp

General Features:

Product description

Boss Audio CPBK2 2 Farad Car Capacity has an equivalent series resistant of 0.00195 Ohms at 120 Hz at 25 degrees C. This capacitor has a low level input voltage of 20V and a high input voltage of 24V. This is a remote terminal screw in capacity with dimensions of 10.3" x 3" x 3". Soundstorm AKS8 8 Gauge complete amplifier installation kit with RCA is included! Low Level Input Voltage: 20 Volts Remote Terminal Screw Equivalent Series Resistance (ESR): 0.00195 Ohms @ 120 Hz @ 25 Degrees C We are an authorized Boss dealer!

• POWER CAPACITOR: 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor; Capacitance: 2 farad, 2 million microfarad
• VOLTAGE: High level input voltage: 24; Low level input voltage: 20 volts; Red LED Digital Voltage Display
• AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload
• CAPACITOR SPECIFICATIONS: Percent capacitance tolerance: 10; Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C; Remote terminal screw; Dimensions: 10.3 x 3 x 3 inches; Manufacturer warranty: 1-year warranty
• 8-GAUGE INSTALLATION WIRING KIT: Includes 20 foot 8 gauge red power cable, 3 foot 8 gauge black ground cable, and 30 foot speaker wire; 20, 4 inch wire ties, 0.25 inch gold plated ring terminal, Number 10 gold plated ring terminal, 0.31 inch gold plated ring terminal, Competition high quality fuse holder, 16 foot 18 gauge blue turn on wire, 20 foot high performance RCA interconnect, 3 rubber grommets

User questions & answers

Question:	I have a 3000 Watt amplifier that is pushing to 15’s with the reserves of 1500 W each will this work
Answer:	Minimum 1 farad per 1000 watts RMS. You'll get better performance with 2 or 3 farad per 1000 watts RMS.
Question:	I have a 1200watt sub running on 1600watt amp and 600watt amp for my speakers will this be good enough
Answer:	Minimum 1 farad per 1000 watts RMS. You will see better better results with 2 or 3 farad per 1000 watts RMS. The larger the cap, the faster it gets ready for the amp's next big hit. For better results, you may need a 3 or 4 farad cap for the 1600 watt amp for the sub. The 1600 watt amp for your sub will need the cap, not your mid range 600 watt amp for your speakers.
Question:	Does the capacitor come with a mounting bracket
Answer:	Yes it does come with mounting bracket. I am using 4 gauge wire, and NOT the 8 gauge it comes with.
Question:	will this item work good with a 820w pioneer amp or is the gauge wire too big or will the capacitor over load the amp or do just fine
Answer:	Yes it will work but you don't need that big of one

Product description

This Package Includes: - 1 x 8 Farad Capacitor - 1 x 0 Gauge Wiring Kit -------------------------------- The **BOSS CAP8** 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor will store temporary power and discharge it to stabilize voltage to the amplifier. This will reduce distortion and help the amplifier operate more efficiently. It features a low-level input voltage of 16 volts, a high-level input voltage of 20 volts, a black finish, and a digital voltage level display. Make your car audio system as efficient as possible with the **BOSS CAP8** 8 FARAD Digital Voltage Display Car Audio Capacitor! - Blue LED Illuminated Window - Equivalent Series Resistance (ESR): 0.0015 Ohms @ 120 Hz @ 25 Degrees C - Low-Level Input Operational Voltage: 16 Volts The Q-Power **0 Gauge Wire Kit** is a complete 3000 watt car amplifier installation kit. It includes: a 17' 0 Gauge Red Power Cable, a 3' 0 Gauge Black Power Cable, a 17' 18 Gauge Blue Turn-on Wire, a 25' 12 Gauge OFC Speaker Wire, and a 17' Deluxe RCA Interconnect.

• **Capacitor**
• NEW **BOSS CAP8** 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor
• Audible Warning Tones for Reverse Polarity
• Voltage Overload
• Low Battery Voltage

User questions & answers

Question:	How many watts is it
Answer:	It is kind of random. Some last a few months while others maybe one month.
Question:	Is wiring 0 guage
Answer:	Dear Customer, Yes, our ultrasonic mist maker will shut off if the water lever gets too low, but the led lights will still turn on. Let's say that as long as the water is lower then the mist maker disc (in the middle of the mist maker), it will auto shut off. Thank you. - Das TooKii Team updated on Noverember 23, 2020
Question:	Will this work good with the boss phanton 2300 watt sub
Answer:	Absolutely! We have an 18" by 6" deep glass bowl that my wife puts the mister in the bottom of. Filled with 2" of water and the bowl will fill with mist and the mist will run off the sides. Add a creepy hand crawling out of the bowl and some glowing eyeballs - pretty neat. Scared the really young kids but those 10 and up loved it.

Product description

Listen to all your favorite music with the Boss Audio 850BRGB Double-DIN CD/MP3 Player. Slide in a CD, connect your Smartphone or MP3 Player to the Auxiliary Input, turn on the AM/FM radio or plug into the USB port for more music options. You can also charge USB devices with the USB port. Bluetooth technology lets you play and control music apps like Pandora and Spotify and make calls hands-free. Choose your sound style with the built-in Preset EQ and change the color with the Multi-Color Illumination Options. Get more music choices with the Boss Audio 850BRGB.

• Bluetooth - Answer/make calls and be hands-free with no distractions. The built-in microphone picks up your voice and your car speakers let you hear the person on the other side. Play and control your music and apps like Spotify/Pandora wirelessly
• Multi Color Illumination - Set the mood and make your car into your own sanctuary. With over 16 Million color combinations, you can set a different tone every day of the week
• Media Playback - Play music through your Bluetooth device or use the USB port. Pop in a CD for more options. Tune into the AM / FM radio stations for up to date music/news/sports and more
• Auxiliary - Compatible with the audio output from smartphones as well as MP3 players
• Inputs - The USB port gives you the option to have a vast library of audio files at your fingertips. The auxiliary input is a convenient way to hook up to your MP3 player
• Outputs - Use the front, rear & subwoofer pre-amp outputs to hook up your speakers (Front Left/Front Right and Rear Left/Rear Right) and subwoofer
• Power - You can get 80 watts x 4 Max Power from the 850BRGB to power your speakers. An amplifier is recommended to make sure your speakers are well powered

Product features

Tune Into The Rhythm

Snap and tap your fingers with the Boss Elite 850BRGB Double-DIN CD/MP3 Player. Pop in a CD, hook your Smartphone or MP3 Player up to the Auxiliary Input, tune into your favorite AM/FM radio station, or plug into the USB port for more music choices. You can also charge USB devices with the USB port. Bluetooth technology lets you play and control music apps and make calls hands-free. Change up the sound style with the built-in Preset EQ and the color with the Multi-Color Illumination Options. Take control with the wireless remote.

Bluetooth Hands-free and Bluetooth Stream and Control

Bluetooth enabled for wireless hands-free calling and speaker listening when paired with a smartphone.

Wirelessly stream audio via Bluetooth so you can listen to streaming music services such as Spotify and Pandora and control the track and volume up/down and play/pause through your system.

USB Port and USB Charging

Supports USB flash drive files up to 32 GB for music playback on units without monitors and music, photo and video playback on units with monitors.

Charge USB connected devices through the built-in 1A charger.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or Smartphone so you can enjoy your music through your system.

Built-in Preset EQ and Electronic Skip Protection

The built-in Preset EQ allows you to choose from preset EQ curves for a variety of music styles such as Rock or Pop.

ESP is a feature that buffers the disc while playing, storing 5 seconds of music. If the disc is interrupted, the stored data fills in for continuous performance.

Pre-Amp Outputs and Switchable Tuner

This unit's Pre-Amp outputs let you expand your system by adding up to 3 amps and/or signal processors for your front and rear channels.

The selectable tuner function allows you to adjust this receiver's tuner to receive radio broadcasts in either the US or Europe.

ID3 TAG and Multi-Color Illumination Options

ID3 Tag allows the audio file to store and display additional data such as title, artist, album, track number and more.

Choose from over 16 million illumination options for customized backlighting.

Wireless Remote Control

A wireless remote control offers access to key functions from the palm of your hand.

True Double Din

Easier installation and better fit in standard double-din openings. Install kit may still be required depending on the vehicle and is not included.

Product description

**We are an authorized Boss dealer** **Package Includes:**
1 x Boss R6002 1200W 2 Channel Car Amplifier
1 x 8 Gauge Amplifier Installation Kit The **Boss R6002** 2 channel 1200 watt amplifier is great for any audio enthusiast. It features a compact design that can fit into most spaces and its 1200 watts provides an immersive sound experience in you car. This amp utilizes speaker overload protection to help guard your equipment. Its also has a soft turn on circuit as well input level adjustments giving you control of your system. Plus this amplifier remote bass control knob allowing you to control your bass output from your dash. This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. ![alt text][1] [1]: https://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb @[video](aNC7VmEEvvE)

• Amplifier:
• NEW **BOSS R6002** 1200W 2 Channel MOSFET Power Car Audio Amplifier
• MAX Power: 1200 Watts
• Max Bridged Power @ 4 Ohms: 1200 Watts x 1
• Max Power @ 2 Ohms: 600 Watts x 2

User questions & answers

Question:	Will this work good with the boss phanton 2300 watt sub
Answer:	It has a ridge on the back to hook onto a clawfoot tub