9 best alpine car amplifiers
Alpine is a well-known brand in the car audio and car electronics industry, and they offer a range of car amplifiers, including mono amplifiers. Here's what you should know about Alpine car amplifiers in the context of car audio, car electronics, and electronics:
Car Amplifiers: Car amplifiers, including mono amplifiers, are essential components of a car audio system. They are responsible for amplifying the audio signal from the car stereo or head unit and delivering it to the speakers, subwoofers, or other audio components in the vehicle.
Mono Amplifiers: Mono amplifiers, also known as monoblock amplifiers, are designed specifically for powering subwoofers. They are single-channel amplifiers that deliver a single audio signal to a subwoofer, providing the bass and low-frequency sound reproduction in a car audio system.
Alpine Brand: Alpine is a reputable brand that is known for producing high-quality car audio products, including amplifiers. Alpine car amplifiers are designed to provide clean and powerful audio amplification, enhancing the overall sound quality in your vehicle.
Power Ratings: Alpine car amplifiers come in various power ratings to match the specific needs of your car audio system. The power output of the amplifier determines how loud and clear your audio system can be. It's important to choose an amplifier that matches the power requirements of your speakers and subwoofers.
Class-D Amplifiers: Many Alpine car amplifiers use Class-D amplifier technology. Class-D amplifiers are known for their efficiency and compact size. They produce less heat and are more energy-efficient compared to traditional Class-AB amplifiers.
Compatibility: Alpine car amplifiers are designed to work seamlessly with other Alpine car audio components, such as Alpine head units and speakers. However, they can also be compatible with a wide range of car audio systems from different manufacturers.
Installation: Proper installation of car amplifiers is crucial to ensure optimal performance and safety. Alpine typically provides installation guidelines and manuals with their products. Many car audio enthusiasts choose to have amplifiers professionally installed to ensure the best results.
Sound Quality: Alpine car amplifiers are known for their ability to reproduce high-quality sound with minimal distortion. They can help improve the clarity, dynamics, and overall performance of your car audio system.
Features: Alpine car amplifiers may come with various features, such as built-in crossovers, bass boost controls, and remote bass level adjustments, allowing you to fine-tune the audio output to your preferences.
Warranty: Alpine often offers warranties on their car amplifiers, providing peace of mind for consumers in case of any manufacturing defects or issues.
Alpine car amplifiers are a popular choice for car audio enthusiasts looking to upgrade their in-car sound experience. When selecting an amplifier, it's essential to consider factors like power requirements, compatibility with your existing audio components, and the specific audio goals you want to achieve in your vehicle.Proper installation and setup are key to getting the best performance from an Alpine car amplifier.
Below you can find our editor's choice of the best alpine car amplifiers on the market
Alpine Bbx-F1200 Vehicle-amplifiers
Alpine
- Amplifier type: Class-A/B
- Channel design: 4/3/2 channel
- Thermal control: Thermal management control
- Power supply: DC-DC PWM power supply
- Power supply design: Mosfet power
Alpine BBX-F1200 280 Watt 4-Channel Amplifier
Alpine
Product description
General Features:
- Alpine BBX Series 4-Channel Car Amplifier, BBX-F1200
- Class-A/B 2-ohm Stable 4-Channel Amplifier
- RMS Power Rating @ 4 ohms: 50 watts x 4 channel
- RMS Power Rating @ 2 ohms: 70 watts x 4 channel
- RMP Power Rating @ Bridged, 4 ohms: 130 watts x 2 channel
- Total power output: 600 watts
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- Soft start turn-on
- 4/3/2 or channel operation
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy duty aluminum alloy heat-sink
- Input sensitivity: .2V - 8V
- Frequency Response: 5 - 50000 Hz
- Total Harmonic Distortion (THD):
- Make sure this fits. by entering your model number.
- Alpine BBX-F1200 4-Channel Amplifier
- This new BBX amplifier gives you Alpine power performance at an amazing price. And they're designed to fit easily in virtually any system.
- Terminal Layout: Two-Sided
- Total Max Power: 600W
User questions & answers
| Question: | Can I install in a Harley batwing fairing |
| Answer: | Is that a bike? If it's 12 volt yes... It's just a question of where are u going to mount the amp |
| Question: | So if i used channel 1&2 for bridge i get 130 watts rms and then can i use channel 3&4 for 2 6 1/2 4ohm and get 50 watts rms for those speakers? sorrn |
| Answer: | Channels 3 and 4 have a bass control, so it would be better to bridge those for a sub. Then use 1 and 2 for your 6.5” speakers. But yes you are correct on the watts |
| Question: | What is the wire size for 12vdc |
| Answer: | At least 8 gauge |
| Question: | does it come with the wiring harness |
| Answer: | Mine did just power though. If you're looking for rca style plugs not included with the amp |
Alpine PK BBX-F1200 BBX Series 600W 2-ohm Stable 4 Channel Class-A/B Amplifier Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB w/Amp Kit
Product description
Alpine PK BBX-F1200 BBX Series 600W 2-ohm Stable 4 Channel Class-A/B Amplifier Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB w/Amp Kit Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel. Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1 Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel. Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1
- Package: Alpine BBX-F1200 + Complete 4 Channel Amp Kit
- BBX-F1200: 600W Max (280W RMS) BBX Series 2-ohm Stable 4 Channel Class-A/B Amplifier
- RMS Power Rating: 4-Ohms: 50 Watts x 4 Channel, 2-Ohms: 70 Watts x 4 Channel, 1-Ohm: N/A, Bridged 4-Ohms: 130 Watts x 2 Channel.
- Input Sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1% / Signal to Noise Ratio: 95dB
- Variable high-pass filter: 50 - 500 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to +12 dB bass boost / Fuse Rating: 40A x 1
User questions & answers
| Question: | How much speaker wire does this kit come with |
| Answer: | Yeah it can I have mine mounted under the seat of my 2014 chevy silverado double cab rear seat with 2 10 inch Fosgate subwoofer |
| Question: | Will this fit in a 2017 Toyota Tacoma ? Wanted to make sure it’s enough wire |
| Answer: | This amp is stable at 1 ohm. If you have two DVC subs then wire each 4 ohm coil in parallel, dropping the impedance to 2. Then take the subs and wire them in parallel together for 1 ohm. This process requires great subs like Orions or similar. But I will say from experience as I've done this with 2 12" Orion 2NT subs and the sound pressure would blow your hat off your head and strike the windshield. The power rating from Alpine is tested in the factory@4 ohm and it pulled 660watts RMS. So one ohm will make you think otherwise. |
| Question: | Will this run two 600w rms subs |
| Answer: | First of all you will likely need a capacitor to supply enough power to the amp during the peaks. SWR -12D4 wired in parallel will give it a 2 OHM load for the amp to produce 500W rms. That said you need an amp to make 750W rms to take a full advantage of type R 12 woofer. |
| Question: | Why does it say 1200w Max on the box not trying to blow my speakers anyone know |
| Answer: | It doesn't come with it but you can buy it separately. |
Alpine S-A60M S-Series Class D Mono Amplifier
Product description
Big bass power from a small package Alpine makes it a little easier to get great bass in your vehicle, especially if you drive a compact car. Their S-Series S-A60M mono subwoofer amplifier can deliver up to 600 watts RMS to your sub, guaranteeing some powerful bass on your drive. And Alpine made this amp so small - it's got less than an 8" by 8" footprint and it's just over 2" tall - it can fit almost anywhere. Technology that keeps you on the air Enhanced Shutdown Performance technology rolls back the output a bit when the amp threatens to overheat from playing at its limits too long. Instead of shutting down completely, it continues playing your music, until it cools enough to return to full power. Convenient features A low-pass filter and adjustable bass boost put you in command of the frequencies that reach your subs. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. An optional wired remote lets you control bass level from the driver's seat. S-A60M control panel
- 330 watts RMS x 1 at 4 ohms
- preamp and speaker-level inputs
- variable bass boost
User questions & answers
| Question: | Will these power 2 10in pioneer subs |
| Answer: | No, only powered outputs |
| Question: | Im usimg this amp on one 8 inch alpine type r. will this be able to handle a 2nd 8 inch? i believe its 300 or 330 rms |
| Answer: | Yes, I have 4 outdoor speakers being powered by the amplifier. The only issue I have found is that if you are going to use the RCA connections, you have to use all 4 RCA connections to get the audio to all 4 speakers. I have been using the Bluetooth option since that will output the audio to all 4 channels. |
| Question: | Will this amp push 1 12" type R good |
| Answer: | I would say no. There is a volumn, treble, and base controls, but no balance control. |
| Question: | Is this amp 600rms @ 2ohms |
| Answer: | It is bridgeable.. if you know what you are doing. If not you will let the magic smoke out |
Alpine KTP-445U 4-channel Power Pack Amplifier
Product description
Universal Class D 4-Channel Head Unit Power Pack for Use with all Aftermarket & Factory Receivers
- Compact Class D amplifier for factory and aftermarket receivers
- Universal plug lets you send signal from RCA outputs or speaker-level wiring
- Runs off same power circuit as receiver.
- 45 watts RMS x 4 at 4 ohms (CEA-2006 compliant)
- Dimensions: 7-7/8"W x 1-1/2"H x 2-9/16"D
User questions & answers
| Question: | I have a 2014 Chevy Spark with the standard 4 speaker system. Upgraded speakers, need more power now. Is this compatable |
| Answer: | I use it regularly with Audio-Technica ATH-MSR7GM headphones (35 ohm) and Grado SR80's (32 ohm). Sound quality is close to wired with apt-x source and plenty of volume for my tastes. |
| Question: | So I have a jvc radio that outputs 50x4 and 22rms x4 will this add some more power because I have aftermarket speakers as well |
| Answer: | It's support the regular 3.5mm jack. I have Shure SE846, UE900 and it works well. No hiss or static. I DO NOT know the technical parts. Good luck. |
| Question: | F150 standard stereo leased. Is this an easy hookup and do factory HU have RC outputs |
| Answer: | Not sure why it wouldn't work with the new iOS, it's a standard usb audio device no special software needed. The plug is mini USB (not micro) so you need a plug that will go from the Apple connector to mini USB. |
| Question: | I have a Pioneer DEH-X6800BT receiver and a Honda Civic 98. Would I need to buy anything additional to install this? Thank you |
| Answer: | Can you retype the question, if your meaning MW milliwatt that's not how you even look for these portable Headphone Amps... You want most dynamic range audio with less distortion... I can tell you that I don't recommend this Model as most have an issue with the Batterys not charging in them with a certain firmware... It's taken me 4 weeks to get the factory to send me replacement Batteries that I still have to replace myself... |
| Question: | Is this amp suitable for a custom 10" cargo sub for an 07 Dodge Durango truck, and can it be mounted under a seat |
| Answer: | As I understand it (ahem, ahem), by plugging into the USB port the unit completely bypasses the sound card (which is on a different system bus). I do know that it completely bypasses your computer sound controls and you must use the controls on the FIIO, and that's what you'd expect if the card was bypassed. Can't say I'm sure that the computer hardware won't balk if there's no working sound card, even if it's not being used, but seems unlikely that'll cause a problem. |
| Question: | Will this amp power "two" alpine swr-12d4 type-r 12" subwoofers with dual 4-ohm at the same time |
| Answer: | Yea it'll work with any computer. And I use it for my iPad with the USB camera adapter |
| Question: | Will this work with either Alpine Type R's, SWR-12D4 and SWR-12D2? Would the 2 ohm pull more power from my battery dimming headlights more |
| Answer: | No, unless there are no provisions for shutting off when charged, and only then. What most people seem to think about electricity is that the amount of power available is how much will be used. Say you have just a main disconnect on 100 amp service and the only thing wired in your house is a 120 watt light bulb. Unless there's a dead short (which would draw enough current to trip the breaker in most cases, assuming the wires aren't too lonh) it's going to draw 120 watts ÷ 120 volts = 1 amp. It's not going to run 100 amps through the bulb. Devices on charge DRAW current, they are not pushed. |
| Question: | Hi, Does this come with Remote Bass control Knob |
| Answer: | I don't know but it is very loud. I have tried different headphone amps and this one was by far the most powerful and with good sq as well. I have blown out headphones with it. |
Alpine R-A60F R-Series Four Channel Amplifier
Alpine
Product description
General Features:
- Alpine R-Series 4-Channel Power Density Amplifier
- 100W RMS x 4 (4ohm, 14.4V < 1% THD+N)
- 150W RMS x 4 (2ohm, 14.4V < 1% THD+N)
- S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm)
- Only 46-degrees of phase shift
- Hi-Resolution Audio Compliant
- Approximate Weight: 11 lbs
- Authorized Internet Dealer
- 1 Year Manufacturer's Warranty
- Alpine’s Class D Amplifier Circuit with Dual Post-Filter Feedback Loops
- CTA-2006-B Power Rating: 100W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N); 150W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
- Bridged: 300W x 2 (4ohm, 14.4V, ≤1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), 106dB (at rated power)
- THD+N ≤0.03% (ref: 1W into 4 ohm)
User questions & answers
| Question: | Does this amp over heat |
| Answer: | Yes |
| Question: | What gauge size do they use for power and ground terminals? What gauge size for the speaker terminals |
| Answer: | It recommends a 12 gauge wire kit. 8 gauge should be fine, anything bigger than that might cause issues |
| Question: | I have this amp in my truck my 6x9 in the front are scratchy now what 6x9 will best suit this amp |
| Answer: | You can bridge it down to 2 channels (100 watts) and run a couple of 4ohm woofers. Obviously its not going to give you any crazy performance or really drive the woofers, but if you are just looking for some added bass, yes it will work. |
Alpine S-A60M Car Type S Class D Subwoofer 1200W Amplifier & 0GA Amp Kit New
Harmony Audio
Product description
This Package Includes the Following Items:
- 1 x Alpine S-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier
- 1 x Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge Amp Install Kit - Nickel
- 1 x Harmony Audio HA-BT1 Car Audio Battery Terminal Pair 8GA & Ring Terminal New
- 1 x Harmony Audio HA-RT0 Power or Ground 1/0 Gauge 5/16" Ring Terminal - Nickel
Alpine S-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier:
- RMS Power @ 4 ohms: 400 watts x 1 channels
- RMS Power @ 2 ohms: 600 watts x 1 channels
- Peak Power @ 4 ohm: 800 watts x 1 channels
- Peak Power @ 2 ohms: 1200 watts x 1 channels
- NOTE: This product can only ship to addresses within the USA and it's territories
Harmony Audio HA-AK0 Car Stereo 1/0 Gauge Amp Install Kit - Nickel:
Specifications:
Harmony Audio HA-BT1 Car Audio Battery Terminal Pair 8GA & Ring Terminal New:
Specifications:
- Alpine S-A60M Car Type S Class D Subwoofer 1200W Amplifier & 0GA Amp Kit New
User questions & answers
| Question: | Is this amp suitable for a custom 10" cargo sub for an 07 Dodge Durango truck, and can it be mounted under a seat |
| Answer: | Yeah it can I have mine mounted under the seat of my 2014 chevy silverado double cab rear seat with 2 10 inch Fosgate subwoofer |
| Question: | Will this amp power "two" alpine swr-12d4 type-r 12" subwoofers with dual 4-ohm at the same time |
| Answer: | This amp is stable at 1 ohm. If you have two DVC subs then wire each 4 ohm coil in parallel, dropping the impedance to 2. Then take the subs and wire them in parallel together for 1 ohm. This process requires great subs like Orions or similar. But I will say from experience as I've done this with 2 12" Orion 2NT subs and the sound pressure would blow your hat off your head and strike the windshield. The power rating from Alpine is tested in the factory@4 ohm and it pulled 660watts RMS. So one ohm will make you think otherwise. |
| Question: | Will this work with either Alpine Type R's, SWR-12D4 and SWR-12D2? Would the 2 ohm pull more power from my battery dimming headlights more |
| Answer: | First of all you will likely need a capacitor to supply enough power to the amp during the peaks. SWR -12D4 wired in parallel will give it a 2 OHM load for the amp to produce 500W rms. That said you need an amp to make 750W rms to take a full advantage of type R 12 woofer. |
| Question: | Hi, Does this come with Remote Bass control Knob |
| Answer: | It doesn't come with it but you can buy it separately. |
Alpine MRV-M250 Mono V-Power Digital Amplifier
Product description
250W Mono Block V-Power Class D Subwoofer Car Amplifier
- MRV-M250 - Alpine Monoblock 250W RMS Class D V-Power Series Amplifier
- Remote Sensing automatic turn-on when using speaker-level inputs
- Gold-plated screw terminals
- 8-gauge power and ground leads recommended
- Dimensions: 7-1/2"W x 2-3/16"H x 7-7/8"D
User questions & answers
| Question: | Does this amp have a bass control input, like an internet input |
| Answer: | Yeah it can I have mine mounted under the seat of my 2014 chevy silverado double cab rear seat with 2 10 inch Fosgate subwoofer |
| Question: | do you really need the remote control knob for this amp |
| Answer: | This amp is stable at 1 ohm. If you have two DVC subs then wire each 4 ohm coil in parallel, dropping the impedance to 2. Then take the subs and wire them in parallel together for 1 ohm. This process requires great subs like Orions or similar. But I will say from experience as I've done this with 2 12" Orion 2NT subs and the sound pressure would blow your hat off your head and strike the windshield. The power rating from Alpine is tested in the factory@4 ohm and it pulled 660watts RMS. So one ohm will make you think otherwise. |
| Question: | Can I run a pair of Alpine 6x9s in the doors |
| Answer: | First of all you will likely need a capacitor to supply enough power to the amp during the peaks. SWR -12D4 wired in parallel will give it a 2 OHM load for the amp to produce 500W rms. That said you need an amp to make 750W rms to take a full advantage of type R 12 woofer. |
| Question: | I am going to use the speaker level inputs on this amp. I have an Audi that already has a sub in the trunk. I was going to disconnect that and use that signal to send to the Alpine. My question is, I just got the amp and there are 4 sets of speaker wires (8 total) to account for the front and rear speakers. I only have |
| Answer: | It doesn't come with it but you can buy it separately. |
| Question: | Is tjod ok for stock speakers for Hyundai Santa fe sport |
| Answer: | No. Mine came with no ear buds. The picture shows a possible use. |
| Question: | how will this amp work with 2 jbl 6.5 and 2 jbl 6x9 speakers |
| Answer: | It does but the big point of this is to provide Bluetooth to earbuds that don’t have it. If you already have Bluetooth you’d be paying for something you don’t need. Look for a straight DAC/amp instead I think. |
ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit
Product description
Alpine introduces the all-new S-Series amplifiers - a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and wont shut down due to overheating. They also feature excellent sound quality in their price range. The Rockville RWK42 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point
- Alpine S-A32F 320 Watt RMS 4-Channel S-Series Car Audio Amplifier Class D Amp. Rockville RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit RCA's. Install. Terminal Layout: One side. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on
- Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (?1%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (?1%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (?1%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General
- Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz - 30kHz. THD+N (@ 10W into 4 ohms): 100. Signal to Noise (@ 50 Watts into 4 Ohms): >98dB. Weight: 1.9 kg. Dimensions. (W x H x D): 8" x 8" x 2.25". Features:
- Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 80 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Latest Reviews
View all
Glasses For Color Blind People
- Updated: 30.04.2023
- Read reviews
Intex Inflatable Bed Twins
- Updated: 27.05.2023
- Read reviews
Mini Fridge Shelving Unit
- Updated: 08.07.2023
- Read reviews
Hca Supplements
- Updated: 05.03.2023
- Read reviews
Kiwi Peelers
- Updated: 15.03.2023
- Read reviews