10 best alpine amplifier for subwoofers

Product description

Big bass power from a small package Alpine makes it a little easier to get great bass in your vehicle, especially if you drive a compact car. Their S-Series S-A60M mono subwoofer amplifier can deliver up to 600 watts RMS to your sub, guaranteeing some powerful bass on your drive. And Alpine made this amp so small - it's got less than an 8" by 8" footprint and it's just over 2" tall - it can fit almost anywhere. Technology that keeps you on the air Enhanced Shutdown Performance technology rolls back the output a bit when the amp threatens to overheat from playing at its limits too long. Instead of shutting down completely, it continues playing your music, until it cools enough to return to full power. Convenient features A low-pass filter and adjustable bass boost put you in command of the frequencies that reach your subs. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. An optional wired remote lets you control bass level from the driver's seat. S-A60M control panel

• 330 watts RMS x 1 at 4 ohms
• preamp and speaker-level inputs
• variable bass boost

User questions & answers

Product description

This Package Includes the Following Items:

• 1 x Alpine S-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier
• 1 x Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge Amp Install Kit - Nickel
• 1 x Harmony Audio HA-BT1 Car Audio Battery Terminal Pair 8GA & Ring Terminal New
• 1 x Harmony Audio HA-RT0 Power or Ground 1/0 Gauge 5/16" Ring Terminal - Nickel

Alpine S-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier:

• NOTE: This product can only ship to addresses within the USA and it's territories

Harmony Audio HA-AK0 Car Stereo 1/0 Gauge Amp Install Kit - Nickel:

Specifications:

Harmony Audio HA-BT1 Car Audio Battery Terminal Pair 8GA & Ring Terminal New:

Specifications:

• Alpine S-A60M Car Type S Class D Subwoofer 1200W Amplifier & 0GA Amp Kit New

User questions & answers

Product description

7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets S-Series amplifiers are your sound systems workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point

• Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's. Specifications:
• Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V ? 1% THD+N); 600W RMS x 1 (2ohm, 14.4V ? 1% THD+N)
• S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N ? 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000
• Remote bass knob compatible (requires RUX-KNOB.2, sold separately). Features: 1 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse

Product description

This Package Includes the Following Items:

• 1 x Alpine S-A60M Car Audio Type S Series Amp Class D Sub 1200W Amp
• 1 x Harmony Audio HA-AK4 Complete 4 Gauge Amp Install Kit - Nickel
• 1 x Alpine R-W12D4 Type R Series Sub Dual 4 Ohm 1500W Peak 12" Subwoofer
• 1 x Car Audio Single 12" SPL Bass Subwoofer Labyrinth Vent Sub Box Stereo Enclosure

Alpine S-A60M Car Audio Type S Series Amp Class D Sub 1200W Amp:

• NOTE: This product can only ship to addresses within the USA and it's territories

Harmony Audio HA-AK4 Complete 4 Gauge Amp Install Kit - Nickel:

Alpine R-W12D4 Type R Series Sub Dual 4 Ohm 1500W Peak 12" Subwoofer:

Car Audio Single 12" SPL Bass Subwoofer Labyrinth Vent Sub Box Stereo Enclosure:

• Single 12" Vented Sub Box
• Mounting Depth: 12-1/4"
• Air Space: 1.75 Cubic Feet
• Vented Enclosure
• Dimensions: Width 18-1/4" x Height 15-1/2" x Depth 16-1/2"
• Vented design allows for maximum output
• Constructed with High Quality MDF
• High Quality Gray Carpet

• Universal Car Stereo Slotted S Port Single 12" Alpine Type R R-W12D4 Sub Box Enclosure with S-A60M Amplifier & 4GA Amp Kit

Product description

Status Mode LED Indicator. Minimum THD at Rated Power: 100dB. Frequency Response: 10Hz - 500Hz. Damping Factor: > 250 @ 100Hz. Dual 40 Amp Maxi Fuse. Dimensions: (W x H x L)8.6x 2 x 13.7. 1 Ohm: 750 Watts x 1 Channel <1% THD+N. 2 Ohm: 550 Watts x 1 Channel <1% THD+N. 4 Ohm: 400 Watts x 1 Channel <1% THD+N). (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 1 Ohm: 1500 Watts x 1 Channel. 2 Ohm: 1100 Watts x 1 Channel. 4 Ohm: 800 Watts x 1 Channel. 1 Ohm: 3000 Watts x 1 Channel. 2 Ohm: 2200 Watts x 1 Channel. 4 Ohm: 1600 Watts x 1 Channel. Features: 1 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets The debut of an 8-inch subwoofer adds to the versatility of the S-Series subwoofer lineup. The 12-inch subwoofers use a new design thats almost 1-inch shallower than their predecessors, thereby making all the models good candidates for systems with limited space. The subwoofers have an improved power rating of up to 600W RMS power handling and are a good match for the MRV-M500 mono amplifier. Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer. The RXD-M2 is a mono amplifier with 3,000 watts peak output and 750 watts CEA-2006 rated power.

• Package Includes: Alpine S-W12D2 12" 1800 Watt Dual 2-Ohm Car Audio Subwoofer DVC Sub SW12D2. Rockville RXD-M2 3000 Watt/1500w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp. Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's. Features: Alpine S-W12D2 12" 1800 Watt Dual 2-Ohm Car Audio Subwoofer DVC Sub SW12D2. CTA-2031 Specifications: 600WRMS, 1800W Peak Power Handling. Frequency response: 26Hz200Hz. Mounting Depth: 5 1/16-inch.
• RockvilleRXD-M2 3000 Watt/1500w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc) 1 Ohm: 750 Watts x 1 Channel <1% THD+N 2 Ohm: 550 Watts x 1 Channel <1% THD+N 4 Ohm: 400 Watts x 1 Channel <1% THD+N). 1 Ohm: 750 Watts x 1 Channel <1% THD+N. 2 Ohm: 550 Watts x 1 Channel <1% THD+N
• 4 Ohm: 400 Watts x 1 Channel <1% THD+N). RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc) 1 Ohm: 1500 Watts x 1 Channel 2 Ohm: 1100 Watts x 1 Channel 4 Ohm: 800 Watts x 1 Channel. 1 Ohm: 1500 Watts x 1 Channel. 2 Ohm: 1100 Watts x 1 Channel. 4 Ohm: 800 Watts x 1 Channel
• Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song 1 Ohm: 3000 Watts x 1 Channel 2 Ohm: 2200 Watts x 1 Channel 4 Ohm: 1600 Watts x 1 Channel. 1 Ohm: 3000 Watts x 1 Channel. 2 Ohm: 2200 Watts x 1 Channel. 4 Ohm: 1600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class D Technology. Studio-Grade Bipolar Output Stage Transistors
• Now exclusively with Professional Peak Limiter Circuitry which guarantees distortion free musical playback at all levels.. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry

Product description

This package contains an Alpine MRV-M500 500 Watt RMS Subwoofer Amplifier, a Kicker 44DCWC122 Dual CompC 12" Subwoofers in Vented Enclosure, and a 4-Gauge Wiring Kit. MRV-M500 Mono V-Power Digital Amplifier Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control. Overview 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N) 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N) Same power in a 40% smaller chassis Evolution to Class D digital platform New snap-on terminal covers for easy installation The CompC Dual 12-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal. Features: Fits Perfectly In A Trunk or SUV Genuine CompC Subwoofer Custom Port Design Made Of Heavy MDF Spring Loaded Speaker Terminal Thick Black Carpet Protects the Enclosure Embroidered KICKER Logo Works Perfectly with CX600.1 Specifications Dual Subwoofers (in, cm) 12, 30 Impedance (Ohms) 2 Power Watts (peak/RMS) 1200/600 Sensitivity (dB 1w/1m) 99.9 Box Top Depth (in, cm) 14, 35.6 Box Bottom Depth (in, cm) 17-3/8, 44.1 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 32-3/8, 82.2

• The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
• V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.
• The right port makes all the difference. Designed to optimize the CompC subwoofer box performance precisely, these enclosures give you the “kick” you’ve been looking for!
• CompC subwoofers are the beating heart of every enclosure. You get a lightweight, injection-molded polypropylene cone and tough, ribbed polyurethane surround built to eliminate flex and distortion.
• This package also includes a 4-gauge wiring kit with full copper wiring and 2-channel RCAs.

Product description

Alpine r-a75m Series monoblock subwoofer amplifier - 750 Watts RMS power with 0 gauge amplifier kit

• Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
• Variable bass Boost (0-12 dB at 50 Hz)
• Variable low-pass filter (50-400 Hz, 24 dB/octave)
• Variable subsonic filter (min-40 Hz, 24 dB/octave)
• Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue

User questions & answers

Product description

This package contains an Alpine MRV-M500 500 Watt RMS Subwoofer Amplifier, an Alpine R-W10D4 R-Series 10-inch Dual 4 Ohm Subwoofer and a 4-Gauge Wiring Kit. MRV-M500 Mono V-Power Digital Amplifier Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control. Overview 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N) 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N) Same power in a 40% smaller chassis Evolution to Class D digital platform New snap-on terminal covers for easy installation Alpine R-W10D4 10-Inch Dual 4 Ohm Subwoofer Specifications: Size: 10 Inches. Frequency Response: 26Hz-200Hz. Power Range: 300W-750W RMS. Power Handling: 750W RMS / 2250W Peak. Magnet Weight: 111oz. Voice Coil Diameter: 65.5mm / 2.6". Sensitivity (SPL): 82.4dB. DC Resistance (Re): 4 Ohm + 4 Ohm. Inductance (Le): 2.72mH. Free Air Resonance (Fs): 30 Hz. Equivalent Stiffness (Vas): 21 L. Mechanical Q (Qms): 8.03. Electrical Q (Qes): 0.50. Total Q (Qts): 0.47. Cone Area (Sd): 333cm^2. Linear Excursion (Xmax): 20 mm. Mounting Depth: 5-7/8 Inch Mechanical Travel (Xmech): 70 mm. Box Specifications: Sealed Box Net Internal Volume: 0.4-0.85 ft^3 Ported Box Net Internal Volume: 0.75-1.3 ft^3 Ported Box Tuning Range: 35-39 Hz

• The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
• V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.
• Parabolic Cone Structure with Pulp/Kevlar Cone & PP/Mica/Talc Dust Cap.
• High Amplitude Multi-Roll surrounds (HAMR)
• This package also includes a 4-gauge wiring kit with full copper wiring and 2-channel RCAs.

Product description

This package contains an Alpine MRV-M500 500 Watt RMS Subwoofer Amplifier, Two Kicker 44TCWC104 CompC 10" Subwoofers in Thin Profile Enclosures 4-Ohm, and a 4-Gauge Wiring Kit. MRV-M500 Mono V-Power Digital Amplifier Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control. Overview 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N) 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N) Same power in a 40% smaller chassis Evolution to Class D digital platform New snap-on terminal covers for easy installation The CompC Thin Profile 10-Inch Subwoofer Enclosure comes loaded a single 4-Ohm terminal. Features: Fits Perfectly Under Or Behind A Seat Genuine CompC Subwoofer Custom Port Design Made Of Heavy MDF Spring Loaded Speaker Terminal Thick Black Carpet Protects the Enclosure Embroidered KICKER Logo Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2 Power Watts (peak/RMS) 600/300 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7-5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21-1/2, 54.6

• The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
• V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.
• A sleek black carpet protects every enclosure, while preventing the box from shifting during travel.
• Heavy MDF construction and thick internal bracing keep your enclosure pounding for years to come.
• This package also includes a 4-gauge wiring kit with full copper wiring and 2-channel RCAs.

Product description

250W Mono Block V-Power Class D Subwoofer Car Amplifier

• MRV-M250 - Alpine Monoblock 250W RMS Class D V-Power Series Amplifier
• Remote Sensing automatic turn-on when using speaker-level inputs
• Gold-plated screw terminals
• 8-gauge power and ground leads recommended
• Dimensions: 7-1/2"W x 2-3/16"H x 7-7/8"D

User questions & answers