9 best kicker 5 channel amplifiers

Product description

Kicker CXA660.5 - 4x90W 4-Channel Full-Range Amp w/300W Class D Sub Channel - 46CXA6605T CX-SERIES AMPLIFIERS Affordable, flexible power w/ 1-Ohm stable mono models Horizontal and vertical mounting options FIT+ TM (Fail-safe Integration Tech-PLUS) accepts output from nearly any source Available remote level control (Mono and 5-Channel amps)

• Kicker - 46CXA6605t - CXA660.5 - 4x90-Watt 4-Channel Full-Range Amplifier w/300-watt Class D Sub Channel

• Class A/B full-range channels
• Class D bass channel included for one amp to run an entire system
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies

User questions & answers

Question:	so can i run 2 front door speakers and 2 12 inch 4 ohm subs with this amp
Answer:	Ye
Question:	Can i push 2 6.5’s 2 tweeters and 2 6x9’s
Answer:	shouldn't be a problem.. I'm using that to power my 1800 watt 12 inch Alpine type R
Question:	Am I able to run the speakers at 4 ohms and the subwoofer at 2ohms
Answer:	Go on your rms wattage. kfc-w3016ps are 50-400 watts rms each this amp should be enough for 2 of those kenwood's
Question:	Does this work with the Kicker remote sub controller
Answer:	30

Product features

CX Amplifiers

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility, and true reliability!

Control It

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

One Ohm Stable

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Towers of Power

CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!

Incredible Sound Everywhere

KICKER’s CX-Series amplifier technology provides clean, powerful music in nearly any vehicle on the road today, without changing your radio or adding a line-out converter. These powerful amps work with as little as nine volts of power from your battery and as much as 40 volts (400 watts) of speaker-level input signal. With KICKER’s FIT+ (Fail-safe Integration Technology-PLUS), you get outstanding noise rejection - even with premium factory audio systems.

Product description

• Class D Power Plant
• SHOCwave Bass Restoration Processor
• KXARC Wireless Remote Included
• Gain Control With Optimal Input Indicator
• Variable 24dB Subsonic Filter
• FIT2 (Fail-Safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ 18dB Variable Bass Boost
• Audio Control Compartment With Cover
• Black Anodized Aluminum Chassis
• Top-Mounted Red LED Light Pipe
• Power Handling
• Frequency Response:
  • AMPS 1 - 2: 10Hz-20kHz
  • SUB: 10Hz-160Hz
• Signal-to-Noise Ratio: 95dB
• Input Sensitivity: 250mV-10V
• KickEQ Bass Boost: 0-18dB @ 40Hz, Center Frequency-20Hz-80Hz, Bandwidth 1-5
• Bass Remote: Inlcuded
• CEA Power Rating: 50W x 4 @ 4 ohms (10Hz-20,000Hz), 200W x 1 @ 4 ohms (40Hz-160Hz)
• Dimensions:
  • Length: 12-3/4"
  • Height: 2-1/8"
  • Width: 8-5/16"

• KICKER® KX amplifiers are as diverse as they are powerful. Five mono amplifiers and four multichannel amps put control and power at your fingertips. This KX 800-watt five channel amplifier is a full system in a single package. This amp also features FIT2™ (Fail-Safe Integration Technology) – giving you superior power, clarity and dependability with nearly any stock or aftermarket radio.This item is Certified Refurbished.
• SHOCwave Bass Restoration Processor
• KXARC Wireless Remote Included
• Gain Control With “Optimal Input” Indicator
• Variable 24dB Subsonic Filter

User questions & answers

Question:	Is this 2ohm stable
Answer:	don't really know I have a 2012 badboy ZT with a 27hp kohler engine and it worked perfect.Sorry can't be of more help.

Product description

44KXA8005 800-Watt 5-Channel Class D Amplifier KICKER KX amplifiers are as diverse as they are powerful. Five mono amplifiers and four multi-channel amps put control and power at your fingertips. KXA800.5 Amplifier This KX 800-watt five channel amplifier is a full system in a single package. This amp also features FIT2 (Fail-Safe Integration Technology) giving you superior power clarity and dependability with nearly any stock or aftermarket radio. Features: Class D Power Plant One-Ohm Stable (Bass Channel) SHOCwave Bass Restoration Processor KXARC Wireless Remote Included Gain Control With Optimal Input Indicator Variable 24dB Subsonic Filter FIT2 (Fail-Safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ+ 18dB Variable Bass Boost Easy Access to Settings Behind Hinged Panel Black Anodized Aluminum Chassis Top-Mounted Red LED Light Pipe Want setup help? Go to KICKER U for a woofer amplifier configuration app! This KX amplifier delivers as much as 100 watts per channel (4 channels driven) or 200 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts. What's in the Box: 44KXA800.5 amplifier Owner's manual Specifications: RMS power (watts)@ 14.4V 4 stereo 1% THD+N: 50 x 4 @ 14.4V 2 stereo 1% THD+N: 100 x 4 @ 14.4V 4 bridged mono 1% THD+N: 200 x 2 Sub Channel RMS Power (watts)@14.4V 4 mono 1.5% THD+N: 200 x 1 @14.4V 2 mono 1.5% THD+N: 400 x 1 @14.4V 1 mono 1% THD+N: +/- 10% Dimensions (L x H x W): 12-3/4" x 2-1/8" x 8-5/16" Frequency responseAmps 1 - 2: 10Hz - 20kHz Sub: 10Hz - 160Hz Signal-to-noise ratio: 95dB Input sensitivity: 250mV10V Selectable electronic crossoverAmp 1: OFF/HP/LP; Variable 105000Hz with X10 switch; 24dB/octave Amp 2: OFF/HP/LP/BP; Variable HP 10500Hz; Variable LP 405000Hz with 10X switch; 24dB/octave SUB: Variable LP 40160Hz; 24dB/octave Subsonic FilterAmp 1: 24dB/octave variable 10-500Hz s

• New for 2017!
• SHOCwave Bass Restoration Processor
• KXARC Wireless Remote Included
• Gain Control With “Optimal Input” Indicator
• Variable 24dB Subsonic Filter

User questions & answers

Question:	What size power wire this except ? O gage
Answer:	you should always use manufacturer recommended power wire gauge size. Using a higher gauge (thinner power cable) can lead to fire risk.
Question:	Can this be hooked up to a vw golf factory touch screen system, or do i need something to connect it
Answer:	Check out amp pro
Question:	Is this a power amp only or built with DSP on it
Answer:	IT has separate crossovers for front and back channels and for the 5th subwoofer channel. Punch bass boost and crossover frequency for sub..High/low for front and back channels...
Question:	This rockford p1000x5 need a lc7i to help clear more the sound and quality
Answer:	No
Question:	Will this amp power 4 rockford fosgate pps4-6 punch pro 6.5-inch single midrange 4 ohm loudspeakers and a 10 inch t1 at 4ohm
Answer:	The stated specs for this amp are: 5 Watts x 4 + 150 Watts x 1 @ 4-Ohms / 125 Watts x 4 + 300 x 1@ 2-Ohms / 500 Watts @ 1-Ohm. I'm not sure I would drive it at 1-ohm, but what you're asking it to do it can do easily. I'm running 2 PPSF4-10s and 2 PPS4-6s with mine, and a dual-4ohm 10" T1 sub and although I'm also running an amp fan on it, I don't think it really needs it. It never gets that hot. The RF Punch series are super efficient speakers that are louder/better than just about anything so you're driving great speakers with a fantastic amplifier.
Question:	I have 2 10" dvc 4ohm subs, punch3 to be exact. Can i still run 4 more 6x9s on top of that
Answer:	Yes

Product features

System Versatility & Unmatched Performance

The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel!

Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits. The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.

Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

Product description

1200W Peak (600W RMS) CX Series Full-Range 5-Channel Bridgeable Class D Car Amplifier

• 75 Watts RMS x 4 @ 2 ohms
• 2 ohms: 300 watts x 1 chan. Subwoofer Channel
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps

User questions & answers

Question:	What would the recommended gauge wire be to power this amp
Answer:	I used ( 4 gauge wire) and it was perfect for my system
Question:	so i installed this amp to run my entire system 2 door, 2 rear deck and 2 subs and it keeps clipping/turning off. What i doing wrong
Answer:	If its not a ground than you may have the subs wired to one ohm which Kicker amps can't handle. Also make sure your gains aren't too high.
Question:	Will this amp push kicker 43cwrt102 comprt 10" 2-ohm subwoofer with my 4 door speakers
Answer:	It will suggested is a ported box you can get a decent one from box called vented I got it’s a good round Base 👌

Product description

800W RMS KX Series 5-Channel Class D-IC Stereo Bridgeable Car Power Amplifier

• 50W x 4-Chan + 200W x 1-Chan @ 4 ohms
• 100W x 4-Chan + 400W x 1-Chan @ 2 ohms
• Bridged: 200W x 2 Chan + 200W x 1-Chan @ 4 ohms
• 3-Way System Protection
• 4 Gauge Power and Ground Inputs

User questions & answers

Question:	I have two 12in subwoofers dual coil 4 ohm and a kicker amp kx 800 channel amp i want to hook these up to my amp what's the best way
Answer:	Thank you for you question. Dual 2 ohm subwoofers are going to be better for that amplifier as it is only 2 ohm stable. You can wire them two ways, wire the voice coils in parallel, then the subs together in series, or wire the voice coils in series then together in parallel. Either way your outcome will only be 4 ohms, but this amp will not run at 1 ohm. Happy to help! - Creative Audio
Question:	Is the sub output 1 ohm stable on this amp
Answer:	Its rated at 2ohms
Question:	Can i use this amp to power 4 componnent kicker cs 6.5 " & a 1 12" kicker comp r
Answer:	Yes. Make sure you have a dual 4ohm sub so it can be wired to 2ohms
Question:	How well can this run the single kicker comp r 12" sub
Answer:	If you're referencing the 12" CompR that is dual voice coil, I have one attached to this and it hits like a champ. It's not the end all be all best of the best, someone with a 1200watt amp and a 15" comp bandpass Orion sub is gonna roflstomp you. But for the fact that the sub is 500watt RMS and 1000watt max it is perfectly balanced to push that sub at it's best levels and you will notice it quite clearly. It is great bang for it's buck and I've been very happy with it every time I go for a ride (vibrates the car nicely to some dubstep/astral projection/Daft punk and others)side mirrors, rearview all that jazz. http://www.qualitymobilevideo.com/40vcwr122.html?gclid=CMit8tOJ_swCFZeEaQodVwUDjw (that's what I bought, it was a Best Buy purchase as they had it in stock that day and it was only a few dollars more to get it "that day" as opposed to Amazon)

Product description

Package: Kicker 46CXA3604 CXA360.4 360 Watt 4-Channel Car Audio Amplifier Class A/B Amp + Rockville RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit RCA's

• Package Includes: Kicker 46CXA3604 CXA360.4 360w RMS 4-Channel Car Audio Amplifier Class A/B Amp, Rockville RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit RCA's.
• Features of 46CXA3604: KICKER 46CXA3604 CXA360.4 360 Watt 4-Channel Car Audio Amplifier Class A/B Amp, Class A/B full-range channels, Three-second turn-on/off delay to eliminate unwanted interference, Variable 12dB crossovers provides control to dial in perfect sound, KickEQ 6dB variable bass boost for those additional low frequencies, FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio.
• Accepts up to 40-volt input signal, Small footprint for easier installation, Vertical mounting hardware included for another unique look, Compatible with CXARC Remote Bass Control, Dimension (L x W x H): 16 inch x 9 inch x 4 inch, Weight: 5 lbs.
• Specifications of 46CXA3604: RMS Power Rating:, .....4 ohms: 65 watts x 4 chan., .....2 ohms: 90 watts x 4 chan., Mono Rating, .....4 ohms: 180 watts x 2 chan., CXRC Remote Bass Capable (sold sep.), Dimensions: 12-1/2 in. (31.7 mm), Frequency Response: 10Hz-20kHz, Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V, Signal to Noise Ration: 95dB, Active Crossover: HI, LO or OFF; Variable 50–200Hz @ 12dB/Octave, KickEQ Boost: Variable 0-6dB @40Hz.
• Features of RWK42: Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit, 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 4 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 80 Amp AGU Gold Plated Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.

User questions & answers

Question:	Would it be good for 2 12” kickers
Answer:	Short answer is no. The long answer is that this is a 4 channel class A/B amp. Usually, these amps are better suited for delivering cleaner power to the highs and mids speaker range. Below 400Hz into the subwoofer range, you will most likely want to choose an amp that will be suited for punch and less clean power. That would be a d-class amplifier. Then it depends on whether you bought DVC or single voice coil subs. Most class d amps are rated RMS power into 4 Ω but really get started to produce the "bump" when you set up your speakers so that the amp sees 2Ω/channel. Then it will deliver twice the power than it would if you had it set up for 4Ω/channel. Of course this depends on the size of the magnet on the speaker for how much power it will handle and then the amp will have a rating for 2Ω posted if it can handle being driven like that. The recovery of the amp depends on the capacitor banks set up for each channel. Often times a good litmus test is to hook it all up and when you are thumping the bass, do your headlights dim out. This may seem cool, but the additional line voltage drop on your amp supply may start to cause electrical problems (blowing fuses and such) with the heavier current draw. So, typically on sub amps to help out with this issue, installers will use an in-line capacitor. For every 500W of amp power you could use a 0.5F capacitor to help the amp out. Or you could change out the alternator, run a battery isolator and dual deep cycle batteries... money, money, money... probably won't need all of this for just 2 12's. Find a d-class amp that matches your subs power handling capability.
Question:	Would it be good for 2 12” kickers comp s
Answer:	It you running just subs you should use an amp made for subs not a four channel amp for best preformance
Question:	How many Rms by channel in 4 ohns
Answer:	Its on the spec sheet but I bought it to match 4- 30 rms speakers
Question:	Does this kit come with the wiring to hook it up to the factory stereo
Answer:	Yes it does

Product description

General Features: Class D Power Plant Gain Control With "Optimal Input" Indicator FIT2? (Fail-Safe Integration Technology) Circuitry Variable 24dB Crossover DSP-Controlled Preamp KickEQ+? 18dB Variable Bass Boost ABYC/NMMA Compliant Power Terminals Conformal-Coated Circuit Boards Easy Access to Settings behind Gasket-Sealed Cover Panel Black Anodized Aluminum Chassis Top-Mounted Teal LED Light Pipe Stainless Steel Mounting Hardware Included Specifications:   RMS Power @ 14.4V, 4? mono, ? 1% THD+N: 50 Watts x 4 RMS Power @ 14.4V, 2? mono, ? 1% THD+N: 100 Watts x 4 RMS Power @ 14.4V, 4? bridged mono, ? 1% THD+N: 400 Watts x 2 Frequency Response (Hz): 10Hz?20kHz Signal-to-Noise Ratio [dB]: 95 Input Sensitivity: 10Hz?20kHz Selectable Electronic Crossover: Amp 1: OFF/HP/LP; Variable 10?5,000Hz with X10 switch / Amp 2: OFF/HP/LP/BP; Variable HP, 10?500Hz; / Variable LP, 40?5,000Hz with 10X switch / Slope: 24dB/octave KickEQ+? Bass Boost: 0-18dB @ 40Hz CEA Power: 50 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) CEA Signal-to-Noise Ratio: -75dB CEA-2006B (ref: 1W, A-weighted) Dimensions (LxHxW): 11-3/16" x 2-1/8" x 8-5?16" 1-year Manufacturer's Warranty Authorized Internet Retailer

• Class D Power Plant
• Gain Control With "Optimal Input" Indicator
• FIT2 (Fail-Safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp

User questions & answers

Question:	Does this amp come with all the wiring
Answer:	No it does not. It includes mounting screws.
Question:	Is it strong enough to push 4 8 inch kicker marine speakers
Answer:	Absolutely.
Question:	It is water resistant? Or marine grade? I’m trying to run it on my quad and want to know if it can get wet and dusty
Answer:	I am not sure? I use it in my boat and it is mounted in a little storage compartment . I would call Kicker- they are in Stillwater, OK. I called them a couple times before to ask questions and they were very helpful.

Product description

Car Toys (Authorized Retailer) Bundle Includes:

Kicker CX660.5 5-Channel Amplifier

AudioControl LC2iPRO Converter

AudioControl ACR1 Remote Knob

Car Toys Bottle Opener Keychain, 1-Year Manufacturer Warranty

FIVE CHANNELS OF FUN



This CX amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+ (Fail-safe Integration Technology-PLUS), giving you superior clarity and dependability.



BIG BASS BOOST



KickEQ variable bass boost gives you as much as a 6dB of extra bump with a simple turn of the knob. A powerful 12dB crossover and 24dB subsonic filter is also included, letting you quickly tune your entire system to taste.



VERSATILITY TO DESIGN YOUR SYSTEM



This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels, plus as much as 300 watts into one bass channel.



CONVERTER: BASS FEATURE



Some factory radios dial down the bass as you turn up the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest.



CONVERTER: YOU CAN RETAIN YOUR CAR'S FACTORY STEREO



More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp.

• BUNDLE INCLUDES: Kicker Amplifier, LC2I Pro Converter, Converter Remote Controller, and Car Toys Keychain. Car Toys is a Kicker and AudioControl Authorized Retailer and full service MECP installer (installation not included). 1-Year Manufacturer Warranty.
• CONVERTER: The LC2I PRO lets you get the best possible signal from your factory sound system to the amplifier, no need to replace your stereo. Compensate for factory bass roll-off with AudioContol’s patented AccuBASS and control a subwoofer with the included ACR-1 level control.
• AMPLIFIER: Class A/B full-range channels. Class D bass channel included for one amp to run an entire system.
• AMPLIFIER: Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound
• AMPLIFIER: KickEQ 6dB variable bass boost for those additional low frequencies

User questions & answers

Question:	This kit is enough for cx1200.1 kicke amp and 2-12" l
Answer:	Yes I have it running a 2000 watt amp and to 12's with no problem
Question:	Will these work for 2 kicker 2ohm duel loaded subs(43dcwr
Answer:	This amp kit is for one amp so how you wire it is up to you but this kit is rated for 1,500 watts and will easily handle the two 10" 2ohm subs your asking about. I built my entire system with ALL KICKER products and I have to say I was a little disappointed with this amp kit due to being incomplete. I had to buy additional items to make it a full kit when wiring my system with one amp. 4 out of 5 stars for me
Question:	How long is the power wire
Answer:	If I remember correctly it’s 17 feet long for the power cable and 2 feet for the ground. Got a clean run from the engine bay to the trunk on a scion TC
Question:	Will this work for a pioneer mono class d 1600 watt amp with dual 10in comp r subs in a Mazda
Answer:	You need 0 gauge, this max 1000 watt mono plus a Capacitor or your lights will dim.