12 best monopod with fluid heads

Product description

The XPRO Monopod Aluminium 4-section with Fluid Video Head is a professional full fluid video monopod made to satisfy videographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles. These state-of-the-art Manfrotto legs have inherited the perfect combination of rigidity and locking safety of professional tripod ranges, like the 190 collection and 055 collection. This monopod is equipped with Manfrotto’s full fluid base (MVMXPROBASE) featuring the innovative FLUIDTECH system that makes Manfrotto XPRO Monopod+ the first of its kind on the market to feature 3D fluidity. The FLUIDTECH video base enables the ultimate shooting smoothness on pan, tilt and swivel for an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere. The new D-shaped aluminium tubes greatly improve anti-rotation resistance throughout the monopod, following the videographer’s rapid rotation movements. Combined with the Quick Power Lock (QPL) which strongly locks the lever onto the monopod tube’s flat side, this eliminates unwanted jerky movements. The newly designed leg warmer guarantees exceptional grip and full footage control with a special version of the successful Manfrotto 500 video head . The MVMXPRO500 replaces the Manfrotto MVM500A

• FLUIDTECH base for smooth movements in all directions
• Quick power lock reliably secures & ensures super-fast set up.Maximum Working Height: 79.9 inches. Folded Length: 30.7 inches
• Newly designed rubber leg warmer for fast & secure movement
• Great operating height for overhead shooting. Dedicated professional video head
• The MVMXPRO500 has one Easy Link 3/8 inch connector to fit an external monitor or other accessories and it comes with the Manfrotto 500PLONG video camera plate

User questions & answers

Question:	How does this compare to the carbon fiber version
Answer:	Cheaper maybe a tad heavier
Question:	Several reviewers mentioned that you can't pan with one hand using a handle. But since it is a monopod, can I twist the whole tripod around to pan
Answer:	Yes you can
Question:	What is the length closed
Answer:	Approx. 26 1/2" from end to end.
Question:	Do I need to secure the camera with one hand all the time
Answer:	On flat or mostly even ground, you don't. If you want to do any kind of panning you will need to hold it.

Product features

Manfrotto XPRO Monopod+

The Manfrotto XPRO Monopod+ family of photo and video monopods brings to the market the innovative FLUIDTECH Base for smooth footage and the possibility to convert photo monopods in video monopods.

Thanks to the improved fluidity and the superior performance of the leg, the XPRO Monopod+ ensure incredibly smooth footage, ultra-sharp photos and creative shooting perspectives.

FLUIDTECH Base

First of its kind, the full Fluid Video Base delivers the ultimate smoothness in an extremely compact solution for advanced video shooting.

Quick Power Lock

Quick Power Lock system ensures extreme locking grip released with the movement of a single hand for a rapid and easy set up.

Ergonomic and easy to carry

The new aluminium d-shaped tubes together with the leg warmer guarantee excellent ergonomic grip and full control during the movement.

Versatile: Photo and Video

Thanks to the removable FLUIDTECH Base, the monopod can be easily used for both photo to video application.

Product description

This head is the perfect synthesis between and innovative "Bridge Architecture" and manfrotto's Cutting edge engineering. A pan fluid drag system gives more ergonomic operation while a wider top plate and longer sliding plate offer extra stability and balance. This head offlbs @mmers an even more rigid structure for maximum precision and improved responsiveness. The built in easy link connectors offer extreme flexibility for accessory attachments. The counterbalance system and ball bearing drag sysem both offer precision and smoothness of operation. This head has been carefully constructed from lightweight modern materials for optimal balance of strength and size. Technical Specifications: Max Payload 13.2lbs; CSB 8.8lbs@55mm; FDS pan variable cartridge; FDS tilt variable cartridge; Tilt range +90° / -85°; Camera fixing quick release; Top plate 140mm 5.5 inches; Height 5.1in.; weight 3.5lbs.Sliding plate for the fastest camera connection and set up

• Pan fluid drag system. Base Diameter: 75 mm, Working Height: 13 cm. Weight capacity is 15.4 lbs. and counterbalance supports 8.8 lbs. Accessory Compatibility: 502HLV, 509HLV, 520BALL, 520BALLSH
• Easy Link connectors for easy attachment of accessories. Top Attachment: 1/4 inch screw, 3/8 inch screw Wider and longer top plate for extra stability
• Built in counterbalance system. Front tilt -80° / +90°
• Ball-bearing drag for precise, smooth movements.Base Diameter: 2.95 inches
• Modern materials for optimal balance of strength and size

User questions & answers

Question:	Does it have a level
Answer:	Sorry, I really don't know. I had returned this head because it seemed overly stiff and had some backlash in trying to position it. I then decided to go with the Manfrotto model MVH502AH which seems to be much smoother (actually perfect) and better built. Also, much better support. (It cost significantly more though.) According to my Manfrotto specs, that head is stated as "Do not use product at temperatures less than -30 degrees C or more than +60 degrees C (-22 F / +140 F). Hopefully the operating temperature of the Neewer would be similar.
Question:	For the MVH502 head with 75mm Half Ball, is it possible to remove the 75mm Half Ball (unscrewing it somehow) to make a flat based head 4 versatility
Answer:	I don't understand your question. You mean the price went up... blame the trade war. Or do you mean you don't know the price and are asking what it is... depends on where you are buying it. Sorry I didn't understand your question.
Question:	Does this work for a slider? Can you adjust where it sits once it is screwed on
Answer:	It is the head only, no tripod. I would recommend any tripod that is sturdy enough to hold your camera. Amazon has some Revel Tripods that are fairly inexpensive and will definitely do the job.
Question:	Will it support a loaded rig with cage, matte box, monitor, following focus and audio recorder? The weight plus camera and lens can easily tops 11lb
Answer:	Do you have the link to eBay for these? I can’t find it anywhere. Thanks.

Product features

PRO Tripod Video Head 100 with Fluid Drag

The Manfrotto 502 Pro Video Head with Flat Base (3/8"-16 Connection) is a full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto's bridging technology (inherited from the 509HD and 504HD heads). This head is designed for executing cinematic moves with compact camcorders and DSLR video cameras. The 502HD comes in two versions: the 'AH' flat-base version and the 'A' ball-base version, which is separately available.

Specification

• Weight: 1691 g
• Material : Aluminium
• Safety Payload Weight: 7 kg
• Counterbalanced Weight: 4 kg
• Tilt Drag: continuously adjustable from 0 to max level
• Pan Drag: continuously adjustable from 0 to max level
• Plate Type: 504PLONG
• Head Type: Video/Fluid Head
• Pan Bar Included: Yes
• Panoramic Rotation: 360

Product description

Miliboo MTT609A Heavy Duty Aluminum Fluid Head Camera Video Tripod for Camcorder/DSLR Professional Monopod Tripod Stand 66.5 inch Max Height with 15 kilograms Max Load and Ground Spreader Design

Features:

*Ideal for digital camcorder weighing up to 8kg,we have tested,the max loading weight is 15 kg

*Widen bowl edge and stands joint makes products more stable.Matching with MYT803 fluid head will bring your smooth experience

*The fluid head of MTT609A use high quality anti-freezing oil,it can be operated smoothy in the hard environment such as 20 degree centigrate below zero

*The fluid head of MTT609A use high quality anti-freezing oil,it can be operated smoothy in the hard environment such as 20 degree centigrate below zero

*16mm 3 section aluminum alloy legs adjust to 16mm.The video head provides full smoothness control while shooting thanks to the variable fluid merchanisms

*Outstanding stability and the max operating can be up to 66" folded height to 32",the item weight:5.1kg,package weight:6.2kg,package size:7.87in*7.87*37.4in



Specifications:

Color: Black

Material: Aluminum alloy

Sections: 3

Max. load: 15kg

Folded length: 85cm / 2.8ft

Max. Operating Height: 170cm/ 5.8ft

Min. Operating Height: 51cm / 1.7ft

Max. leg diameter: 22mm / 0.9in

Min. leg diameter: 16mm / 0.6in

Bowl Head Diameter: 75mm / 3in

Item Weight: 5.0kg / 11lbs

Package Size: 97 * 20.5 * 20.5cm / 38.2 * 8.1 * 8.1in

Package Weight: 6.8kg / 15lbs



Note: The camera showed in the picture is not included

Package List: 1 * Tripod with Bowl Head

* Carry Bag

* QR Plate

* Handle

* 1/4" Screw

* 3/8" Screw

* Mini Wrenches

* User Manual(English & Chinese)

• Ideal for digital camcorder weighing up to 15kg (33 lbs)
• Widen bowl edge and stands joint makes products more stable.Matching with MYT803 fluid head will bring your smooth experience
• The fluid head of MTT609A use high quality anti-freezing oil,it can be operated smoothy in the hard environment such as 20 degree centigrate below zero.
• 16mm 3 section aluminum alloy legs adjust to 16mm.The video head provides full smoothness control while shooting thanks to the variable fluid merchanisms
• Outstanding stability and the max operating can be up to 66" folded height to 32",the item weight:5.1kg,package weight:6.2kg,package size:7.87in*7.87*37.4in

User questions & answers

Question:	How smooth are the transitions from left to right
Answer:	It supports push messages through Internet mobile phones. If the phone does not receive the message outside, please check, set the permission, or ask for after-sales support according to the after-sales mode
Question:	Can it safely support a Canon C200 with a monitor and mic
Answer:	No, there is an indoor unit in the package.
Question:	Can I use this tripod head on a slider
Answer:	Hello, the video doorbell is equipped with a rechargeable battery. Under normal use, charge once every one to two months.
Question:	Will this work with a jvc pro hd camera
Answer:	Yes,the legs of this tripod is flexible and easy to bend.

• ➤Professional Video Head: Comes with 1/4 inch mounting screws which fit most standard video equipment; Standard 3/8 inch threaded screw port on the bottom makes it suitable for all tripods, monopods, light stands, and camera sliders.
• ➤Removable assembly: fully adjustable pan/tilt arm can be operated on either side of the head.
• ➤Ergonomic Design: Fluid head pan/tilt locking,360° pan and +90°/-83° tilt range; effortless photography and videography shooting.
• ➤Camera safety lock: Instantly locks camera plate to head, safely releases camera and plate from head.
• ➤Bubble level: Security locking knob can prevent equipment from falling off accidentally. The bubble level also allows for stable shooting and adaptation to different environments. (The perfect suitable monopod : IFOOTAGE C180.)

Product features

Unique fluid head- KOMODO K5

The aircraft grade aluminum alloy ensures both strength and durability in use, whilst the entire main body is smooth to the touch and protected from corrosion and wear through anodic oxidation treatment.

Tilt and pan movements are incredibly smooth thanks to iFootage’s patented fluid head design and can be quickly locked off and on. The quick release camera plate attachmen and locking system is easy to use and very reassuring as you hear it click your precious camera and lens solidly into plate.

Mounting and Parts

Technical Data:

Base diameter: 2.4inch

Bottom screw hole: UNC 3/8-16

Mounting Screw: UNC 1/4-20

Loading: 11lbs / Height: 3.85inch / Weight: 1.67lbs

In the box:

1*Fluid head

1*Handle

1*Quick releast plate

1*Instruction manual

Aluminium alloy material

Aircraft grade aluminium alloy provides ultimate strength and long life.

Corrosion and wear resistant anodic oxidised surfaces.

High precision bearings

Unique, patented high precision bearings system ensures smoothness of movement.

Spirit level design

Quickly and simple levelling.

Universal mounting

Standard 3/8" mount,suitable for all tripods and monopods.

Product description

The p-224sr photo/video monopod with va5 head from Sirui is an 10-layer carbon-fiber monopod with a pivoting and swiveling base which has a smooth rotating 360? Pan for video.. The folded length of the p-224sr is 26.8 but reaches a maximum height of 63 when the 4 sections are extended. The 3.1 lb support has a load capacity of 17.6 lb. The included 1.3 lb va-5 video head is included as part of the kit and has a load capacity of 6.6 lb.

• Sirui p-224sr carbon fiber video monopod with feet and va-5 video head
• Country of Origin:China
• Package weight:6.9 lb
• Color Name:Gray

Product description

SUNWAYFOTO brand Arca-Swiss compatible DT-02.Precisely engineered / exact Arca Standard.26.5lb Max load!.

Fluid Panning base. Laser engraved with lock.Modular design with top Arca compatible dovetail.

All Metal knobs. For long term durability. All knobs are metal, no plastic or rubber parts.

Clamp has a very versatile Jaw opening range of 37.25mm to 41.5mm will accommodate any Arca style plate from various makers

including:Really right stuff (RRS), Wimberley, Jobu Design, Arca Swiss, Kirk Enterprises, Markins, etc.

Metal: 6061T651 aircraft-grade aluminum.

Top width (clamp removed): 39mm.

Base diameter: 54mm.

Height: 87mm.

Weight: 335g.

Max load: 12kg (26.5 lbs).

Bottom thread: 3/8" with 1/4" adapter.

• Fluid Panning Base with lock.
• Includes removable 50mm Screw Knob Clamp
• Max load: 12kg (26.5 lbs)
• All Metal knobs. For long term durability.
• Modular design with both top and bottom Arca compatible dovetails.

User questions & answers

Question:	the photos shows a sunwayfoto dp-60l plate with it, is that plate included
Answer:	It includes the clamp, not the DP-60R plate that is shown in the first picture. You get what you see on the second picture.
Question:	Can the clamp be pivoted for up/down use with a camera loaded with a short lens (no collar)? I shoot often in darker areas with a 20mm lens
Answer:	Can the Clamp be pivoted? I am not sure I understand. The head can be tilted, is that what you mean?The clamp itself is fixed to the top of the head.
Question:	Can the DDC-50 clamp be rotated 90 degrees to make it perpendicular to tilt rather than parallel
Answer:	Yes, it can; I just did it yesterday. There are four holes for alignment pins, remove the clamp and use the other holes. Be careful with the small pins. Previously, I dropped one and could not find it. SunwayFoto sent me a few more. Great service. BTW - you can also swap out clamps, I switched to a DLC - 50 lever release on my monopod. I had earlier swapped out to a MAC-14 which allowed me to use both a Manfrotto and Arca Swiss plate. I have gone completely Arca Swiss.
Question:	Does the sunwayfoto dt-02d50 monopod tilt head with clamp come with the mounting plate? if no, what is the recommended plate
Answer:	The DDC-50L Screw-Knob Dovetail Clamp from Sunwayfoto (as shown in photo) is an Arca-type compatible clamp and is included with the SunwayFoto DT-02D50 Monpod Tilt Head. NatureScapes Store

Product description

Ideal for fast-moving action, long lens and field work, The MC600 aluminum monopod with 610FH fluid head combines a 4 section monopod with a Pro fluid head. The carbon fiber MC600 monopod rises to a maximum height of 79.1″ and collapses to a compact 29.5″ for storage and transport. The monopod has an ergonomic grip on its upper section and can support up to 44.1 lbs on its own or 6.6 lbs with its included fluid head. “Stable movement” is the specialty of this monopod and it has 3 retractable, removable feet at its bottom for a wider footprint and greater stability. Where the monopod meets the feet, there’s a fluid base somewhat like a ball that allows 360-degree Rotation as well as 180-degree tilting in any direction while still supporting your gear. The 610FH fluid video head is designed for any image-making scenario where smooth movement and camera control are at the top of your list of requirements. The E-Image MC600 monopod is an ideal, portable solution for on-the-move shooters using DSLR, camcorder, and mirrorless cameras. The Flip lock design on the MC600 has a high locking torque while still providing ease of use, which makes for quick and reliable adjustments on the go. With a spread of 16″ The mc600’s base serves as a mini tripod that delivers reliable stability.

• 4 stage carbon fiber construction
• Maximum height: 79.1″
• Minimum height: 29.5″
• Weight: 4.5 lbs
• Payload: 6.6 lbs

• 📹 Professional Video Head: Comes with 1/4 inch mounting screws which fit most standard video equipment; Standard 3/8 inch threaded screw port on the bottom makes it suitable for all tripods, monopods, light stands, and camera sliders.
• 📹 Removable assembly: fully adjustable pan/tilt arm can be operated on either side of the head.
• 📹 Ergonomic Design: Fluid head pan/tilt locking,360° pan and +90°/-83° tilt range; effortless photography and videography shooting.
• 📹 Camera safety lock: Instantly locks camera plate to head, safely releases camera and plate from head.
• 📹 Bubble level: Security locking knob can prevent equipment from falling off accidentally. The bubble level also allows for stable shooting and adaptation to different environments. (The perfect suitable monopod with ASIN: B07GW5G1GX.)

User questions & answers

Question:	Is this made of metal or plastic
Answer:	Yes, it has a level
Question:	Where or how can i purchase a second "pan/tilt/arm" for this brand and model video fluid head
Answer:	Yes Yes Yes! It is possible!!! The halfball attaches to the head using 3/4 thread
Question:	Is this head compatible with sirui p-204sr p series monopod
Answer:	Yes it does! but once its screwed onto the plate on the slider you cant adjust the position of the head, only the up and down and right to left since it is a fluid head :) hope that helped
Question:	What is the size of the screw thread on video tripods
Answer:	I use it on a Monopod with a cage, 5D3 and Tascam DR60D and it works pretty well. I'm guessing I have an all up weight of about 7 pounds. For the price its a pretty good fluid head.

Product features

Unique fluid head- KOMODO K5

Our camera head knows no rivals! Made of aircraft-grade aluminum alloy, the composition ensures both strength and durability in use. The entire main body is smooth to touch and protected from corrosion and wear through anodic oxidation treatment.

Tilt and pan movements are incredibly smooth thanks to iFootage’s patented fluid head design and can be quickly locked off and on. The quick release camera plate attachment and locking system is easy to use and very reassuring as you hear it click your expensive gear solidly into the plate.

• Aluminum Construction: High quality aluminum alloy video tripod, lightweight and sturdy. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 12KG/26.5lbs. Tripod weighs only 3.5lbs/1.59kg (Without video head.
• Adjustable and Extendable: 4-section aluminum legs with quick release twist-locks allow you to adjust the working height from 17.7" to 62.6" in seconds, while with a folded height of 18.5". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
• 2-in-1 Video Tripod and Monopod: 2-in-1 video camera tripod, it's functional design allows it to be used in video tripod, monopod or alpenstock mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
• VA-5 Ultra-Compact Fluid Video Head: The VA-5 Fluid Video Head weighing in at 1.3 lbs while holding up to 6.6 lbs. The VA-5 fluid head utilizes two bubble levels – one on the base of the head for tripod alignment and one on the top for camera alignment. An internal spring-assisted counter-balance provides for smooth 360° pans and +90°/-70° tilts.
• Easy to Carry: Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.5" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

User questions & answers

Question:	Besides the different ball head what is the difference between the sirui nt-1005x and the sirui a-1005 tripods
Answer:	Hello, there is no different between this tripods. Best regards your SIRUI team
Question:	This tripod comes with a strap by no instructions on how or where to attach
Answer:	The strap goes on the bag into which the tripod can be carried ... and does not attach to the tripod itself.

Product features

SIRUI Upgraded Traveler VA Tripod

Lightweight: Weighing 1.59KG/3.5lb, the SIRUI Traveler VA tripod can reversibly fold up to minimize its size at 470mm/18.5"

Shoulder less: With a reverse leg fold-up, easily backpack the 315mm/12.4inches compact fit and carry less at a weight approximate to 550mm/21.7".

Multiple Working Height: Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional wor king heights.

Easy Leg Adjustments: Adjust the legs to your desired angle by pulling out the semi-automatic leg angle adjustment button. Easily set up the legs with a quick turn twist of the leg locks.

Shoot Beyond Your View: Smoothly pan the head 360° to capture a beautiful landscape panorama shot.

SIRUI Compact Traveler Tripod VA

Sections: 4

Tube Diameter(mm/inch): 15-25.8/ 0.59-1.01

Max. Height(mm/inch): 1590/62.6

Min. Height(mm/inch): 450/17.7

Retracted Height(mm/inch): 550/21.7

Folded Height(mm/inch): 470/18.5

Monopod Height(mm/inch): 425-1645/16.7-64.6

Weight(kg/lbs): 1.59/3.5

Max. Load (kg/lbs): 12/26.5

Adjustable Working Height

Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights. The working height of VA tripod can be adjusted from 450mm/17.7" to 1590mm/62.6".

Easy Leg Adjustments

Light-weight but durable, the portable tripod legs can be folded 180 degrees, collapsed size of just 31.5 cm when the legs are folded up by 180°, which is easy to carry when taking pictures.

Multi-angle Shooting

3-position leg angle adjustment system helps you capture images from the best angle and position.

Multi-functional Hook

With a stability weight hook and non-slip rubber feet design, you can hang additional weight to get better stability on the different ground surface for more types of shooting.

Easy Conversion to A Monopod

SIRUI VA tripod can be converted into a monopod easily for multiple use. Ideal for photography in sport meeting, mountain climbing, traveling, etc.

Smooth Fluid Head

The fluid-damped system allows smooth, quiet and vibration-free camera use. SIRUI VA-5 helps photographers to pan or tilt cameras smoothly.

Product description

The ML-900C+GH04F Monopod from E-Image is a 4-section carbon fiber video support equipped with E-Image’s base and a GH04F fluid tilt head. A versatile kit for nearly any videographer or filmmaker, the ML-900C+GH04F can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The 4-section design, paired with an carbon fiber construction, results in an easy-to-transport setup weighing just 7 lb. With a maximum height of 81. 9” and a minimum height of just 37. 4″, the ML-900C+GH04F can be adjusted to suit users of varying heights and for various different tasks. While the design of a monopod is relatively simple, the E-Image Monopod line utilizes some innovative features which make using the ML-900C+GH04F fast and easy. The leg sections have been designed not only to compliment the flip locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod. The integrated base utilizes a ball joint that facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use. The head may be used while moving freely or locked in place via a side-mounted knob. Control of the head is facilitated by a single, long control arm which may be adjusted to the height of the user. A 501 standard quick release plate is also included, allowing for quick vertical mounting and dismounting of your camera or camcorder. A 3/8″-16 mounting thread is provided under the GH04F head should the user choose to use the monopod without a head for direct camera mounting.

• Includes GH04F pan tilt head
• Max Height: 81. 9″
• Closed length: 37. 4″
• Payload: 11 lbs.
• 3 stages

Product description

Description:

At the request of our customers, we launched the upgraded version of

MTT705A in 2019. the new product number is MTT705Ⅱ-AL.the new fliud

head with hollow-carved design can reduce the weight to 0.85kg but keep

10kg load capacity, more easy to carry. The newly upgraded damping oil,

with its exceptional antifreeze properties, is still available at minus 40

degrees. The bottom ball mini-tripod is FLUID TECH and features a

one-button upright lock. Fine workmanship, quality upgrade, and easy to carry.

  Features:

1, Fast set up, quick release plate support baroclinc and Horizontal insertion.    

type installation, common use in Manfrotto 5 series.

    Extended QR plate with 10.8mm,± 4cm sliding distance.

2, Safety switch,can well prevent the equipment from falling off accidentally,

Instantly locks camera plate to     head,

safely releases camera and plate from head.

3, Built-in bubble level,quickly and simple levelling.

4, Standard 3/8" threaded screw hole on the bottom , makes the suitable for all

tripods, monopods, light stands and camera sliders.

5, Copper threaded hole,more durable.

6, Ergonomic buckle design,which open and fold it quickly to save time and

power.It also protect hands no danger while using.

  Specifications:

Quick Shoe: Yes

Horizontal Tilt: 360 degrees

Front Tilt: -75 degree to 90 degree

Tripod Mount Thread Size: 1/4 and 3/8 inches

Tension Control: Pan and tilt adjustment knobs

Construction: Aluminum

Folded:80cm/31.4inch

Max working height:188cm/74.01inch

Weight: 2.1kg

Tube diameter:20-34.2mm

Section:4

  Package Contents:

1x Fluid Drag Head

1x 3/8 to 1/4 inch Conversion Screw

1x Quick release plate

1x tool kit

1x User Manual

• Built in counterbalance system. 360° pan and Front tilt -75° / +90°
• hollow-carved design,10kg high load capacity with only 0.85kg weight.
• Use special damping oi with antifreeze characteristics,Support for use below minus 40 degrees
• Compatible with 65mm/75mm bowl size tripod and monopod
• Features ¼’’ screw with also 3/8’’ adapter to mount your camera

Product description

iFootage Komodo K5 Fluid Head

• Lightweight fluid head is suitable for camera and video recorder, the load is up to 5KG with 2.4KG of rebound force.
• With security anti-pin to prevent the equipment sliding over and falling from the unlocked quick release plate.
• Locking knobs for fluid pan and tilt movements.
• Built-in high precision bearing mechanism and original designed bearing mechanism providing the high loading capability keeping smoother shoot.
• Novel appearance, low gravity, lightweight with convenience.

User questions & answers

Question:	Is the knob for the tilt also control the drag of the tilt or is it just a locking knob
Answer:	Controls the drag. It’s a well made fluid head.
Question:	How or where can i get just the handle
Answer:	The handle comes as part of the unit.
Question:	Does it have a Manfrotto style baseplate like the
Answer:	Don’t know the 501, but it seems to be standard size. It screws onto both of my tripods. Hope that helps.