13 best tripod with heads

Product description

This head is the perfect synthesis between and innovative "Bridge Architecture" and manfrotto's Cutting edge engineering. A pan fluid drag system gives more ergonomic operation while a wider top plate and longer sliding plate offer extra stability and balance. This head offlbs @mmers an even more rigid structure for maximum precision and improved responsiveness. The built in easy link connectors offer extreme flexibility for accessory attachments. The counterbalance system and ball bearing drag sysem both offer precision and smoothness of operation. This head has been carefully constructed from lightweight modern materials for optimal balance of strength and size. Technical Specifications: Max Payload 13.2lbs; CSB 8.8lbs@55mm; FDS pan variable cartridge; FDS tilt variable cartridge; Tilt range +90° / -85°; Camera fixing quick release; Top plate 140mm 5.5 inches; Height 5.1in.; weight 3.5lbs.Sliding plate for the fastest camera connection and set up

• Pan fluid drag system. Base Diameter: 75 mm, Working Height: 13 cm. Weight capacity is 15.4 lbs. and counterbalance supports 8.8 lbs. Accessory Compatibility: 502HLV, 509HLV, 520BALL, 520BALLSH
• Easy Link connectors for easy attachment of accessories. Top Attachment: 1/4 inch screw, 3/8 inch screw Wider and longer top plate for extra stability
• Built in counterbalance system. Front tilt -80° / +90°
• Ball-bearing drag for precise, smooth movements.Base Diameter: 2.95 inches
• Modern materials for optimal balance of strength and size

User questions & answers

Question:	Does it have a level
Answer:	Sorry, I really don't know. I had returned this head because it seemed overly stiff and had some backlash in trying to position it. I then decided to go with the Manfrotto model MVH502AH which seems to be much smoother (actually perfect) and better built. Also, much better support. (It cost significantly more though.) According to my Manfrotto specs, that head is stated as "Do not use product at temperatures less than -30 degrees C or more than +60 degrees C (-22 F / +140 F). Hopefully the operating temperature of the Neewer would be similar.
Question:	For the MVH502 head with 75mm Half Ball, is it possible to remove the 75mm Half Ball (unscrewing it somehow) to make a flat based head 4 versatility
Answer:	I don't understand your question. You mean the price went up... blame the trade war. Or do you mean you don't know the price and are asking what it is... depends on where you are buying it. Sorry I didn't understand your question.
Question:	Does this work for a slider? Can you adjust where it sits once it is screwed on
Answer:	It is the head only, no tripod. I would recommend any tripod that is sturdy enough to hold your camera. Amazon has some Revel Tripods that are fairly inexpensive and will definitely do the job.
Question:	Will it support a loaded rig with cage, matte box, monitor, following focus and audio recorder? The weight plus camera and lens can easily tops 11lb
Answer:	Do you have the link to eBay for these? I can’t find it anywhere. Thanks.

Product features

PRO Tripod Video Head 100 with Fluid Drag

The Manfrotto 502 Pro Video Head with Flat Base (3/8"-16 Connection) is a full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto's bridging technology (inherited from the 509HD and 504HD heads). This head is designed for executing cinematic moves with compact camcorders and DSLR video cameras. The 502HD comes in two versions: the 'AH' flat-base version and the 'A' ball-base version, which is separately available.

Specification

• Weight: 1691 g
• Material : Aluminium
• Safety Payload Weight: 7 kg
• Counterbalanced Weight: 4 kg
• Tilt Drag: continuously adjustable from 0 to max level
• Pan Drag: continuously adjustable from 0 to max level
• Plate Type: 504PLONG
• Head Type: Video/Fluid Head
• Pan Bar Included: Yes
• Panoramic Rotation: 360

Product description

The Compact Action is the best choice for owners of entry level DSLRs with standard kit lenses who like to shoot a lot of photos and movies. The ergonomic joystick head with scroll-wheel locking mechanism is very intuitive and easy-to-use. Its comfortable grip allows you to capture smooth movies and great images with little effort. The innovative circular quick release plate is perfect for effortless camera attachment by hand without any need for coins or screwdrivers. Thanks to its shape, camera orientation will never be an issue again. Simply close the lever just above the joystick handle. In addition, the Regulating Dial, together with the round quick release plate allows you to perfectly adjust every camera to the tripod thereby enhancing its stability. Last but not least, the photo-movie selector allows maximum freedom in any circumstance. Switching to the desired mode only takes a second and ensures you always obtain great photos and smooth movies. For more information please refer to the product instruction manual.



Compatibility The Compact Action is designed to work perfectly with entry level DSLRs with standard kit lenses but is compatible also with any device up to 1.5kg/3.3lbs such as DSLR, Mirrorless, Compact System and Bridges Cameras.



SPECIFICATIONS

center column rapid closed length 17.83 in

column tube diameter 22mm

front tilt -30 Degree / +90 Degree

head tilt lateral tilt -90 Degree / +90 Degree

head tilt leg angles 21 Degree

leg sections 5 number

material aluminum legs and techno polymer

maximum height 61.02 in

maximum height (with center column down) 52.36 in

minimum height 17.32 in

panoramic rotation 360 Degree degrees

plate type quick release - with 1/4-20'' screw

quick release YES

safety payload 3.31 lbs.

weight 2.56 lbs. Base Type- 1.4 inches.

• High-quality aluminium design
• Perfect for entry-level SLRs with standard lenses
• Switch from photo to movie mode almost instantly
• Quick-release plate supports a wide range of devices
• Includes a special adapter for higher-specification cameras

User questions & answers

Question:	What is the maximum weight this tripod can support
Answer:	6.6 lbs
Question:	will it hold canon 7d n 18-200 lens securely
Answer:	No
Question:	Can this tripod be used to take macro shots of flowers/insects/etc on the ground
Answer:	It points directly down , so yes.
Question:	Is it sturd
Answer:	I can say YES, you may have some problems if your camera is a DSRL with a battery grip, the weight can be more of what the tripod can handle

Product features

Manfrotto Compact Light

Born to Be With You Always

Ultra lightweight, portable, and effortless to use, the Compact Light is an indispensable tripod for any circumstance. It's time to get the best out of your compact system cameras.

Manfrotto Compact Action

Made for Photos and Movies

Super intuitive, ergonomic, and versatile, with the Compact Action you can finally realize the potential of your entry-level DSLR. Your images and movies will never look the same again.

Manfrotto Compact Advanced

Great Stability and Precision

Rock solid, precise, and portable, the Compact Advanced with 3-Way Head will support your standard zoom lens and entry-level DSLR so you can take your photography to new heights.

Manfrotto Compact Smart

Universal Smartphone Clamp

The Universal Smartphone Clamp is featured with the Compact Smart, and it is designed to attach your smartphone to a tripod thanks to the two 1/4'' female threads located at the base and on the back of the clamp.

Protective Bag

Padded bag for safe and comfortable transportation.

Compactness and Intuitiveness

Flexible, lightweight, and optimized for CSC and DSLR cameras.

Stability Across the Range

Leg structure you can rely on for sharp and detailed images every time.

Product description

Supports loads up to 8.8 lb (4 kg) Features a 65mm ball base Two-way fluid head for smooth motion Fixed counter-balance spring set to 3.3 lb (1.5 kg) provides smoother tilt movements 2-stage design allows you to adjust the height of the tripod from 27.6" to 59" (70 to 150 cm) Middle spreader provides enhanced stability by holding the tripod legs in locked position Provides fixed counter balance, pan, and tilt drag Allows you to leverage the slide range of +20 / -25mm to enable travel capabilities - essential in balancing uneven configurations Provides camera mounting via a slide plate that can be attached via a 0.25" (6.35mm) screw with video pin Offers tilt angle adjustments from +90° to -60° Ground spikes for outdoor use and convenient retractable rubber feet for delicate floor surfaces Weighs 7.9 lb (3.6 kg) General: Load Capacity: 8.8 lb (4 kg) Maximum Height: 59.0" (150 cm) Minimum Height: 27.6" (70.1 cm) Folded Length: 30.3" (77 cm) Leveling Bubble/Illuminated: Yes/no Weight: 7.9 lb (3.6 kg) Head: Counter Balance System: Fixed counter-balance spring @ 3.7 lb (1.7 kg) Quick Release/Wedge Plate: Yes/no Balance Plate: Yes Slide Range: +20/-25mm Tilt Drag: Yes Tilt Range: +90°/-60° Tilt Lock: Yes Pan Lock: Yes Legs: Head Attachment Fitting: 65mmm half bowl Material: Anodized aluminum Leg Stages/Sections: 2/3 Leg Lock Type: Flip locks Independent Leg Spread: No Spiked/Retractable Feet: Yes/yes Center Brace: Yes [mid-level]

• Supports 8.8 lb (4 kg) | 65mm Ball Diameter | 2-Stage Leg Design
• Height Adjustment Range - 27.6" to 59" | Middle Spreader | Fixed Counter Balance
• Fixed Pan / Tilt Drag | +20/-25mm Slide Range | Lightweight Tripods | With Quick Release Plate
• Tilt Angle +90° / -60°
• In The Box: VT-QRP400 Quick Release Plate, Carrying Case, Allen Keys , Limited 1-Year manufacture Warranty

User questions & answers

Question:	What it the overall height
Answer:	Maximum height is about 63 inches with all legs pulled out.
Question:	Is the head removable? Can you attach a slider to this tripod
Answer:	No the head is not removable, yes you can put a slider on the mount, however, I had to throw this tripod away after a few uses because the 3 inside bars that stabilize the legs together are super thin and weak and broke very easily, I would shop for a different tripod if I were you
Question:	Will this tripod work with my canon vixia hf g20 and my canon eos 70d? lastly is this a good tripod for the money
Answer:	Yes it should work with both its should fit the standard tripod screw 1/4-20 and yes it comes new and I don't use it as much as I though I would but so far it is a very good investment on my part hope this helps you
Question:	Is the fluid head removeable to attach onto something like a slider or other rigs
Answer:	Unfortunately no. When the head detaches from the handle the screw remains on the bottom of the head. I had to buy a small manfrotto head to put on my slider.

Product description

Designed for traveling, the be free live aluminum lever-lock tripod kit from Monforte is a video tripod system comprising a fluid head, aluminum tripod legs, and a carrying case. This compact kit features lever-style leg locks for quickly setting up, a strong core, and three tripod-angle positions. Ideal for mobile applications such as logging, it supports loads up to 8. 8 lb. And has a height range of 16 to 59. 5" With the center column extended. The be free live video head features a smooth, fluid drag system with separate pan and tilt locks. Its standard Monforte 501PL sliding quick release plate is used for easily balancing and quickly detaching your camera from the head. Head features include a removable pan bar and a bubble level. The head offers complete 360 degree of pan movement and -90 Degree/+65 Degree tilt adjustment. The three-stage tripod has a 1. 6" Flat base, one 3/8"16 easy Link accessory mount, and a hook for attaching a stabilizing weight. The be free live aluminum lever-lock tripod kit folds down to 15. 75" And weighs approximately 4 lb.

• Video tripod kit built for travel performance
• Pl. travel lever secures maximum stability and easy setup
• Amazing smooth footage with be free live fluid video head
• Side pull Selector ensures quick setup with both hands
• Unique premium design, 100% made in Italy

User questions & answers

Question:	Where can i order a seperate manfrotto mvkbfrt-liveus quick release plate
Answer:	https://www.amazon.com/Manfrotto-501PL-Connect-Sliding-Camera/dp/B0017U0BRE/ref=asc_df_B0017U0BRE/
Question:	What is the minimum heightpossible for this tripod
Answer:	I'm guessing over 12 inches as there's a center piece
Question:	How do I lock the pan so it will not swivel
Answer:	It depebds of your camera weight
Question:	What adaptor do i need for canon eos 7d
Answer:	You don't, this will work fine with the EOS 7D.

Product features

Everything You Need For Your Videos

Manfrotto Befree Live is a compact travel video tripod kit, dedicated to videographers and vloggers who want maximum performance, even when they are on the go. It fulfills an increasing demand for a lightweight, ergonomic travel tripod that is easy-to-carry. It is designed for video recording with DSLRs, compact system cameras or small camcorders up to 8.8 lbs

The new generation of Befree Live (V2) has significantly improved features on the tripod legs: stronger core for extra stability, Easy Link (1/8" attachment) to mount accessories and ergonomic angle selector with 3 angle options instead of 2. The tripod comes with MVH400AHUS Fluid Video Head and leveling ball joint. The new generation of Befree Live (V2) includes: MVKBFRL-LIVEUS (aluminum legs with lever locks), MVKBFRT-LIVEUS (aluminum legs with twist locks), MVKBFRTC-LIVEUS (carbon fiber legs with twist locks).

Portability

Befree Live tripod is compact and easy to carry thanks to the inverse foldable leg design and the included carrying bag. It features an ergonomic angle selector with 3 angle options.

Smoother Movements

The included fluid video head holds up to 8.8 lbs and assures pan and tilt fluid movement. It features leveling bubble, removable pan bar, quick release plate, 1/4"-20 screw and 3/8"-16 adapter.

Leveling

Befree Live tripod features a leveling ball joint to ensure perfect horizontal alignment of the camera even when the tripod is on an uneven surface.

Strong core

The strong core of the tripod guarantees maximum stability. It features Easy Link (standard 3/8” attachment) for accessories and a hook to attach a weight for stabilization.

Product description

The lightweight fluid video system MVK500AM includes the fluid video head (60mm half ball) MVH500A and the twin leg video tripod MVT502AM (aluminum, middle spreader) The MVH500A is a lightweight head with a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs.) of equipment. MVH500A is supplied with a 60mm half ball video tripod mount. The 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs.), but is able to support equipment of up to 5kg (11 lbs.). The 500 has one Easy Link 3/8" connector to allow an external monitor or other accessory equipment to be fitted. The MVT502AM video tripod is a traditional 2-stage, aluminum twin-tube video tripod that has professional features yet is designed to be intuitive, user-friendly and suited to lightweight applications. The MVT502AM has telescopic aluminum legs for compactness and reduced weight; its innovative ellipse-profile tubing with redesigned leg locking collars give it excellent levels of rigidity and stability. The first-stage spreader has improved ergonomics and ease of use, while the tripod's rubber feet improve grip on all floor and ground surfaces. A rubber strap ensures easier, safer transport. Supplied with padded carrying bag. Specifications Closed Length 28.35 in Column Cross Section three-faceted Maximum Height 60.63 in Minimum Height 26.57 in Load Capacity 11.02 lbs. Weight 6.83 lbs.Pan Drag: fluid cartridge with fixed drag

• Fluid head with 60mm half Ball
• Twin Leg Design
• Padded Carry Bag included
• Material-Carbon Fiber, Aluminium

User questions & answers

Question:	Which screw driver do I need to take this tripod apart in order to clean it
Answer:	I don't know as im not looking at it at this moment but I would use a air compressor and high pressure air first if the dirt is still present then take it apart but be careful many small parts could be lost or broken in the process
Question:	whats the weight like on this? i know it says "lightweight," but could i easily pick this up and move with it a small mirrorless system and
Answer:	I can easily move the tripod one handed with a gh4 (mirrorless) mounted to it. The "neck" of the tripod makes for a solid grip, and I find it very mobile.
Question:	I know the head says it supports 11 lbs, but I’ve swapped that head. What about the legs, what is there max capacity
Answer:	Cannot be less than 11 lbs
Question:	Is this best for dslr camera video shoot
Answer:	Yes I used it myself with a gh2. Worked great.

Product description

290 Xtra is the link between past and future: it’s still the classic rock-solid 290 tripod but it features new style and technical functions. 290 Xtra has become more flexible thanks to the new 4 leg angle positions that allow photographers to be much more creative. It maintains its solid aluminum construction with an exciting design update. This kit comes with a 2-way head for quick and precise set up. A dedicated shoulder bag that makes it the perfect photographic companion both indoors and outdoors.

• Premium Italian design. Each leg can be set at 4 angles of spread.To change the angle on a leg, close the leg towards the centre column slightly and press down the locking button "C" at the top of the leg.Whilst holding the button down, select the new leg angle and then release button "C" to lock in position.The angle of each leg can be adjusted independently of the other two legs.The last position allows to achieve the floor level.
• Adjustable aluminum Leg Locks,15.9 to 67.5" Height Range
• Robust aluminum construction
• Shoulder bag included
• 4 leg angles

User questions & answers

Question:	Can the head point the camera 90 degree facing up towards the sky
Answer:	Hello Kavin,Yes, the head will allow for the camera to point up 90 degrees towards the sky.If you have additional questions, please let us know.Thank you,Shannon PROCAM
Question:	Will the center post invert for macro shots
Answer:	Yes, it can be inverted. In addition, the tripod legs will go completely flat to the floor and allow the camera (depending on the lens used) to get within less than a foot from the floor. I just checked it out myself with this Manfrotto and my Canon 5D and it's a solid setup for macro photography. If you need a lens less than 10 inches or so from the surface, invert the head and you're good.
Question:	Is it true that the CF tripod really is only .5lbs lighter? Why is it so much more expensive then
Answer:	The carbon fiber offers better vibration absorption which comes into play with slow shutter speeds and long focal lengths. Other than that, it's just the weight reduction. If you walk, hike, bike and travel without a car, you'll appreciate every ounce that carbon fiber tripods save.
Question:	I'm having a wobble with the head...is there an easy fix to this
Answer:	loosen the thumbscrew on the top of the mount, then rotate the head clockwise until tight. Then you can lockdown the head. should you need to rotate the head in a counter clockwise direction you have to loosen the thumbscrew slightly, other wise it becomes loose and the result will be head wobble. I hope this helps.

Product features

290 XTRA Series

This model links the past to the future: the classic, rock-sturdy 290 tripod in a fresh new style with cutting edge technical functions. Now featuring a choice of 4 leg angle positions, this model has gained even greater flexibility with its solid construction, both in the aluminium and composite carbon fiber versions.

All the SKUs in the 290 Xtra family come with a convenient carrying bag to maximize trans-portability. Moreover, it features a new rubber legwarmer to increase the grip and an updated metal disc with the Manfrotto logo which renovates the design of this classic support.

Models avaialable:

MT290XTA3US - Aluminum Tripod

MK290XTA3-BHUS - Aluminum Tripod Kit with Ball Head

MK290XTA3-3WUS - Aluminum Tripod Kit with 3 Way Head

MK290XTA3-2WUS - Aluminum Tripod Kit with 2 Way Head

MT290XTC3US - Carbon Fiber Tripod

MK290XTC3-BHUS - Carbon Fiber Tripod Kit with Ball Head

MK290XTC3-3WUS - Carbon Fiber Tripod Kit with 3 Way Head

All models are Made in Italy and come with a 2 year warranty that can be extended to 10 years if you register your product online.

Tripod with Center Column and new top disc

Available in Aluminum and Carbon Fiber.

Leg Angle Selectors

Allows the tripod legs to be positioned in 4 different angles.

Quick Flip Leg Locks

Allows for quick and easy set up and break down.

Carrying Bag

Manfrotto branded tripod carrying bag.

Product description

Take the versatility of a ball head, add true ergonomic control and you get the 322RC2 Horizontal Grip Action Ballhead! The 322RC2 is unique in that it allows you to unblock, move, position and lock your camera with one hand in one position. This is due to the revolutionary design of its grip handle which incorporates the ball lock lever.A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera and lens. The 322RC2 is made from magnesium for lightweight performance, and is designed to keep the weight of your equipment as close as possible to the tripod's center of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 11 pounds (5.5 pound capacity when in the vertical position).

From the Manufacturer

Take the versatility of a ball head, add true ergonomic control and you get the 322RC2 Horizontal Grip Action Ballhead! The 322RC2 is unique in that it allows you to unblock, move, position and lock your camera with one hand in one position. This is due to the revolutionary design of its grip handle which incorporates the ball lock lever.

A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera and lens. The 322RC2 is made from magnesium for lightweight performance, and is designed to keep the weight of your equipment as close as possible to the tripod's center of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 11 pounds (5.5 pound capacity when in the vertical position).

The 322RC2 comes complete with a built-in bubble spirit level and quick release camera plate (standard 1/4-20-inch screw, with secondary safety pin). The 322RC2 is suitable for use with 35mm or medium format cameras. In addition, you can also mount the 322RS shutter release accessory. The 322RS is a world's first. With its remote control electronic camera shutter release, the 322RC2 becomes the only photographic head available today that can put camera control within reach without having to move your hand from the head grip to the camera body.

Features include:

• Sturdy all-metal construction.
• The compact, rectangular 200PL quick release plate system fits neatly under small-bodied still cameras up to SLR (even with tele lenses) or small medium format, or under small video cameras or spotting scopes. Its rubber pad gives a good grip without damaging the camera, and its angled sides ensure that it also fits perfectly and tightly into a wide range of Manfrotto heads.
• This head features a secondary security lock so you can't accidentally release the plate (and camera) without meaning to. The lock stops the quick release lever from opening fully.
• A convenient single locking mechanism blocks or frees movement on all axes for greater speed of use.
• Separate control for pre-setting the friction of the ball when unblocked. The position of the red line indicates the approximate amount of friction applied.
• By keeping the head and camera mounting plate as low as possible, the camera is kept safely closer to the tripod's center of gravity for more stable support.
• Thanks to the repositionable camera plate, this can be used right- or left-handed. Photographers are normally forced to be right-handed by the position of the shutter release button, but the advantage of this system even to right-handed users is that you can keep one hand on the grip to control framing position and switch rapidly between portrait and landscape settings, while the other hand stays on the camera, ready to shoot even with the head in movement. Keeping both hands positioned like this gives you greater control over panning or tracking shots.
• Designed for use with the 322RS electronic or 322RSM manual shutter release cables and mounts; the first accessories to let you control head positioning and shutter release at the same time, with the same hand, without needing to let go of the head grip.
• The built-in, carefully hand-set bubble spirit level helps make sure your horizons really are horizontal.

What's in the Box:

Ball head, quick release plate.

• PRACTICE: With one hand you can unlock, move, position and lock the camera again, thanks to the ergonomic handle that controls the friction
• LIGHTWEIGHT AND COMPACT: Thanks to the magnesium body this tripod head is easy to carry
• SAFE: The locking mechanism is controlled by the lever-operated friction, allowing you to counterbalance the weight of the camera
• STRONG: The magnesium body makes this head particularly strong, with a capacity to hold up to 5 kg. It is suitable for 35mm and medium format digital cameras
• COMPATIBLE: The Grip Action ball head gives you the possibility to also mount a Manfrotto Remote Control

User questions & answers

Question:	How is this grip attached to the tripod
Answer:	This unit is intended for a higher-end tripod that doesn't include a head, or if it does, is a removable with standard screw on top - see item description below: See Manfrotto specs here: https://www.manfrotto.com.br/heavy-duty-grip-ball-head.html or in item description on Amazon: The 322RC2 comes complete with a built-in bubble spirit level and quick release camera plate (standard 1/4-20-inch screw, with secondary safety pin). The 322RC2 is suitable for use with 35mm or medium format cameras. In addition, you can also mount the 322RS shutter release accessory. The 322RS is a world's first. With its remote control electronic camera shutter release, the 322RC2 becomes the only photographic head available today that can put camera control within reach without having to move your hand from the head grip to the camera body.
Question:	Is the quick releaese Arca swiss compatible
Answer:	No, it uses a clamp and plate that is proprietary to Manfrotto. I have attached a low-profile clamp from RRS that is ARCA-compatible to the Manfrotto plate, and that works for me. Peak Design also makes a plate that can be set up to work both with this Manfrotto clamp and an ARCA clamp (such as their capture clamp). Each plate orientation would be at 90˚ to the other, so that would be a consideration.
Question:	will this head handle a Nikorr 70-200 zoom lens? Lens weighs 3.4 lbs. and this head is rated for more, but, the "light duty" part worries me
Answer:	Easily works with my 70-200 lens, however, I mount the camera and lens from the rotating ring on the lens (not camera body) so that the weight is distributed equally across the mounting plate.
Question:	Does anyone have the peak design capture (sling or clutch) working on this head? i know the rc2 is hit or miss when connecting to it
Answer:	I have tried it, and it 'works', that is to say it is possible to use the bolt supplied with the Manfrotto QR plate to attach the PD clamp on top, but I personally found it to be less than useful. The capture system works very well as designed for belts or straps, but I found it to be fiddly on a monopod or ball head. The QR clamp I find most useful on this head is a UniqBall UCX X-Cross Clamp. It can indeed be used with PD plates, but there's a trick: instead of placing the plate in the middle of all 4 claws, slide it half-way between 2. ;)As always, YMMV.
Question:	Does it work with a manfrotto mt190xpro3 tripod
Answer:	My friend unfortunately i can not answer this question because I have zomei tripod not Manfrotto tripod, you can check the properties for the tripod and fluid head, and according to the results you may know.. Any other questions you are very welcome
Question:	Will this work with the 200pl-pro plate
Answer:	200PL-PRO will not work on MVH400AHUS . They are not compatible.
Question:	What other types of plates will work with this head, I do not care for the sliding video plate it came with
Answer:	I'm sure that you can check the Manfrotto website and see what other connection plates can be used with this, but be aware that the plate that it's designed to be used with, it the best all around, for the designed purpose.
Question:	Will this work on the manfrotto befree model number mkbfra-bh? some are claiming this head is not fitting their tripod
Answer:	I am in the same predicament, I have the oldest model of the Manfrotto Befree MKBFRA-BH but want the video capable version now. So I either I get his if it's compatible with the Befree MKBFRA-BH or get a new one entirely.

Product features

Smoother Movements

Manfrotto technology for pan and tilt fluid movement to guarantee smoothest footage

Leveling

Smart Leveling column to ensure perfect horizontal alignment in few seconds.

Compact & stability

The video head fits perfectly when folded and is steadily supported when in action.

Heritage & Innovation for the best video quality

True to its family heritage, Befree Live express the essence of a premium video support.

Heritage & Innovation for the best video quality

True to its family heritage, Befree Live express the essence of a premium video support.

Heritage & Innovation for the best video quality

True to its family heritage, Befree Live express the essence of a premium video support.

Heritage & Innovation for the best video quality

True to its family heritage, Befree Live express the essence of a premium video support.

Product description

The key feature of the 190X is the ground level adaptor which allows great shooting creativity. Once placed on the top casting and combined with the 4 leg angles, it enables the tripod to reach ultra-low positions. The legs of the 190X tripod are fast to extend and adjust, thanks to the Quick Power Lock levers. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable and rigid than with traditional lever designs. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the pre-set angles, allowing even greater positioning freedom. The top casting of the 190X has an Easy Link connector to support a photo or video accessory (such as a LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, turning the tripod into a practical mobile studio. The new XPRO fluid head is the best choice for photographers wanting to start shooting videos to expand their creativity. Thanks to its body in Aluminum and in Adaptor polymer, it is compact, portable and lightweight, weighing a mere 0.7 kg. The XPRO Fluid head has 2 levels of fluidity to switch between hard and soft fluidity according to the kind of movement preferred and to the kind of gear in use. The quick release system is used to accommodate the 200PL plate so there is no need to use different plates when switching from photo to video. The 190X and the MHXPRO-2W head are made in Italy by Monforte. Technical Specifications: Center Column rapid Center Of Gravity 2.16 in Closed Length 27.17 in Color black Column Tube Diameter 0 63/64 in Front Tilt -60 Degree / +90 Degree Leg Angles 25 Degree.46 Degree.66 Degree.88 Degree Leg Sections 3 number Legs Tube Diameter 26. 22.5. 19 mm Material Adaptor and aluminium Maximum Height 66.93 in Maximum Height (with Center Column Down) 57.09 in Load Capacity 8.82 lbs Weight 6.06 lbs.

• Center Column: Rapid maximum height: 170 cm
• Color: Black
• Column Tube Diameter: 0.63/64" (25mm)
• Leg Angles: 25, 46, 66, 88, Safety payload 4 kg

User questions & answers

Question:	I have looked at a lot of Manfrotto tripods and they problem across the entire product range are faulty legs, why is this
Answer:	It's a great tripod with the fluid head. So smooth. I use it for following model as they pass by. It is one of the best tripod I ever have.
Question:	How tall is this fully extended with center post up and with head to base plate
Answer:	Yes
Question:	What is the max height
Answer:	I’m sure if your spotter scope has a 1/4 screw mount it will work just fine. Actually, I am using with a large Vortex spotting scope and sometime with my Nikon D80.
Question:	When using this for panning shots, is it smooth
Answer:	It should. The phone mount that is included will expand up to 7 inches and the A21 is about 6.5 inches wide.

Product description

This stable and sturdy yet delightfully lightweight field tripod is outfitted with outstanding features at a great value. Capable of supporting equipment loads weighing up to 13.2 lbs., the Orion Tritech II Field Tripod with Fluid Pan Head is an ideal choice for portable support of spotting scopes, cameras, video cameras, binoculars and more.



The Tritech II Field Tripod's buttery smooth, 2-way fluid pan head boasts 360-degrees azimuth motion and over 90-degrees of altitude rotation with robust pan and tilt lock levers. An adjustable-angle pan handle with comfortable grip provides exceptionally smooth pan and tilt control. For fast leveling in the field, two handy bubble levels are built into the Tritech II Field Tripod: one at the top of the tripod legs, and one at the base of the pan head.



The tripod's three-section extendable aluminum alloy tripod legs feature efficient flip-lock clamps and a metal spreader brace for extra stability. The Orion Tritech II Field Tripod with Fluid Pan Head extends to 56.5 inches with each 3-section leg fully extended. A geared center column elevator shaft with lock lever provides 11.7 inches of additional extension for a maximum extended height of 68.2 inches.



An extra-long, 3-7/8" slotted quick-release shoe with rubber pads provides a large non-slip contact surface for attached instruments. For enhanced instrument safety, a red release button must be depressed to detach the slotted shoe. The quick-release shoe remains captive even when loose, so your treasured instrument can't slip off the pan head accidentally.



In especially windy conditions, a backpack or other weight can be hung from the integrated ballast hook at the bottom of the tripod's center column to enhance stability and prevent wind-induced vibrations.



Weighs just 4.8 lbs. and collapses to 27.25" long for easy transport and storage. A soft zippered carry case with adjustable shoulder strap is included.

• Provides sturdy and portable support for instrument loads up to 13.2 lbs.
• Tripod height reaches a generous 68" when fully extended
• Features 3-section extendable aluminum alloy tripod legs with flip-lock clamps and metal spreader brace for extra stability
• Extra-long slotted 1/4"-20 captive quick-release shoe allows super-secure attachment of cameras, spotting scopes and L-adapter equipped binoculars with a non-slip grip
• Weighs just 4.8 lbs., and collapses to 27.25" long for easy portability. Includes zippered carry case.

User questions & answers

Question:	Will this work for my orion astroview 120st eq telescope
Answer:	Not sure Call Orion. They are very helpful and knowledgeable.
Question:	I have an orion goscope 80mm tabletop refractor telescope but it has a connector in the base - will it work with this tripod
Answer:	Thank you for your inquiry. That tripod will work with your telescope.
Question:	Will this tripod work for celestron 20x80 skymaster pro binoculars
Answer:	I used it with a 25x100 binoculars. It did work very well for me.
Question:	Will i need any adapter to hook it to an orion apex 127 scope
Answer:	Hello- I have a SVBONY tripod bracket that works well with my Orion Mini Giant Binoculars. I am not familiar with the Orion Apex 127 scope, but most telescopes come with a mount that slides into the mounting base of the tripod. My concern would be whether the Orion Tritech would be big enough to support the weight of the telescope.

Product description

Alta Pro tripods have unmatched flexibility, stability and enabling more angle possibilities than ever before. Its innovative Multi-Angle Central Column (MACC) System allows users to move the central column from zero to 180-degree angles in variable vertical and horizontal positions making macro-photography and special wide-angle shots a breeze.The Instant Swivel Stop-n-Lock (ISSL) System securely repositions the central column in one simple movement, in just a few seconds, while maintaining the tripod’s stability. Additional tripod features include advanced camera vibration and shock control, aluminum alloy legs that adjust to 25, 50 and 80-degree angles, quick-flip leg locks, patented premium magnesium die-cast canopy, hexagon-shaped central column for extra stability, and non-slip, spiked rubber feet for changing terrains and a removable hook for hanging camera accessories. Its SBH-100 fluid-like ball head rotates 360 degrees and has smooth locking knobs, an outstanding loading capacity and fine-tuning functions.

• 26mm 3 section aluminum alloy legs adjust to 25, 50, and 80-degree angles to enable extreme low angle photography. Quick flip leg locks and rubber feet with retractable spikes
• Smooth fluid-like SBH-100 ball head rotates 360 degrees and includes quick release plate QS-39 and bubble levels
• The MACC (multi-angle central column) system allows you to move the central column from 0 to 180 degrees in various vertical and horizontal positions
• The Instant Swivel Stop-n-Lock (ISSL) system securely repositions the central column in one simple movement. Premium magnesium die-cast canopy, removable accessory hook, and anti-shock ring
• Specifications: Folded height: 28.2", Extended height: 68.2", Weight: 5.4 pounds. Max. load capacity: 15.4 pounds

User questions & answers

Question:	it comes with a bag or case
Answer:	Keep in mind if you get the one with the pan head that it is very hard to fit it into the case. I usually have to remove the handles to get it in.
Question:	Can this tripod get really low to the ground/spread out on the ground without extending the arm out
Answer:	The Legs DO fold out further, so that you can get lower to the ground. If you want to get lower, what you can do is slide up the middle piece all the way up, it comes out. Then you can flip it upside down so that the camera is now between the 3 legs. Sure your photo will be upside down, but that's what the rotate function is for in your photo editor.
Question:	Its so confusing,whats the difference with the 263 tripod kits and tripod, does that mean for 169$ you only get the tripod head
Answer:	The trick is to look at the last (second) letter in the model number. If it ends with "T" then it's just the tripod legs. "B" stands for ball head, so if the name ends in "B" you get the tripod legs and the a ball head. "P" stands for pistol-grip head. The first letter stands for the name of the material: "A" for aluminum, "C" for carbon fiber. So if the model number is 263AB, it means that it's the aluminum tripod legs plus a ball head.
Question:	Is there any difference between the 263AB and 264AB? I'm not really seeing any difference
Answer:	Vanguard Alta Pro 263AB is both taller and larger than the 264AB. Both are virtually identical in weight, and have identical 7.0kg load capacities.I own both, the 263AB is a full-size (height-wise) tripod, while the 264AB is subtly more compact, which is noticeable when you set them up side-by-side. If you are of average height you may find you do not need to extend the center column with the 263AB very often, while you will probably need to extend the center column on the shorter 264AB most of the time. This technically affects stability, but the ~4" of extension is generally not significant for casual use. A big difference for me is that the 264AB will fit inside almost all airline carry-on bags I use (with the ball head removed), whereas the 264AB usually does not fit (at least in bags that are regulation size...).* 3-segment legs vs. 4-segment legs* 1730mm (68.125") extended height vs. 1625mm (64") extended height* 1425mm (56.125") minimum extended height vs. 1390mm (54.75") minimum extended height* 715mm (28.125") folded height vs. 625mm (24.625") folded heighthttp://www.vanguardworld.com/index.php/pv/products/detail-1-4-225-623.htmlhttp://www.vanguardworld.com/index.php/en/pv/products/detail-1-4-225-622.html

Product features

VANGUARD Alta Pro Tripods

Quite possibly the most flexible tripod in the world Alta Pro is everything you need for out-of-this-world photography. Alta Pro tripods have unmatched versatility and stability, enabling more shooting angle than ever before.

MIKE MOATS: Pro Macro Photographer

"As a macro photographer I need a tripod that has the ability to maneuver my camera into all kinds of angles, and also be able to get my camera right down on the ground if I need. The Vanguard Alta Pro is the perfect tripod for accomplishing this task."

Product description

Dolica's 62" Aluminum Proline Tripod is ideal for both indoor and outdoor photography. It is perfect for events, sports activity, capturing that one amazing shot. Designed for use with Point-N-Shoot cameras and / or Digital SLR cameras Tripod Features: Professional Aluminum alloy construction and able to support up to 13.2 lbs. Base thread: 3/8". Includes ballhead, quick release plate and bubble level. 90 degree vertical platform. Standard-wide angle, semi-wide angle, full-wide angle. Quick release leg locks and non-slip rubber feet.

From the Manufacturer

Proline Series AX620B100 Professional Alluminum Alloy Tripod and Ball Head Combo

 

Tripod and Ball Head Technical Details

Maximum height column↑: 60 inches

Maximum height column↓: 51

Minimum height column↑ : 32.5 inches

Minimum height column↓ : 21.5 inches

Closed height: 22.5 inches

Net weight: 2.5 lbs

Max weight: 13.2 lbs

Leg sections: 4

Material: Lightweight aluminum alloy

Color: Black

• Ball Head Technical Details
• Base thread: 3/8 inch
• Quick release thread: 1/4 inch
• Panoramic angle: Horizontal 360°
• Material: lightweight aluminum alloy
  
  
• Color: Black
  
  

Premium features

Rapid stabile center column

Reversible locking center column

Durable flip leg locks

Non slip rubber feet with retractable spike

Closed cell NBR grips

Integrated tripod bubble level and compass

3-position leg angle adjustment locks

Counter weight hook

Best feature

Its stylishly made well, engineered with professional features, and priced to be in every household ~Be the Photographer~

• Includes a tripod carry case
  
  

Features

• 62" Aluminum Proline Tripod
• Support up to 13.2 lbs
• Ballhead, quick release plate and bubble level
• Quick release leg locks and non-slip rubber feet

User questions & answers

Question:	This does not appear to be a true "Ball Head." It appears that you have to swivel the apparatus around in order to achieve complete coverage
Answer:	Yes, this DAC can
Question:	Can you change the ball head on this
Answer:	Hi, it's also a standard line/auxiliary out. Thank you.
Question:	What is the smallest it can be folded to fit into a backpack
Answer:	I use this to switch between my Rotel Power amp (130 Watt RMS X 2) and a Vintage JVC Quadraphonic Receiver. (100 X 2 or 43 X 4) to switch the same set of front speakers for both. In the 6 months having done this, the sound is right on and no difference in quality. I do think the 100 watt rating is conservative, since I have no problems with 130 watt RMS on the one amp. I am very happy with this unit.
Question:	What is the difference between the 60" and 62" that the 60" is more costly
Answer:	No. Your preamp connects to your amp with RCA cables (or XLR) and this unit switches using the speaker wire outputs off of an amp.

Product description

The Manfrotto 490 centre ball head is the simplest head of the centre ball head range. A very reliable tool, the 490 head is designed in Italy, with special attention to the ergonomics and functionality: one single knob operates the full head, making it extremely intuitive and easy-to-use. With a safety payload of 4kg, it is the perfect head for amateur photographers who need a quick, smart and simple head for their CSC or mirrorless camera.

• BALL HEAD: The simplest of the Manfrotto heads, this ball head is suitable for beginner photographers
• SIMPLE AND PRACTICAL: Having a single adjustment knob, it is very simple and intuitive to use, even for inexperienced photographers
• FUNCTIONAL: Simple locking and full movements on the pan and tilt axes, positioning in portrait angle
• QUICK SET-UP: Quick plate attachment allows fast and easy mounting for any photography enthusiast
• RELIABLE: Holds up to 4 kg, for simple equipment suitable for those new to photography with CSC or mirrorless cameras

Product features

496 & 494 Center Ball Head Models

For all photographers looking for a portable yet powerful ball head, the premium aluminum 496 Center Ball Head enables smooth and precise camera positioning. The 494 model is a completely redesigned Center Ball Head made to increase the framing speed through intuitive controls and high sphere smoothness.

492, 492LCD & 490 Center Ball Head Models

Despite being very small, professionals recognize the Manfrotto 492 and 492LCD as reliable allies to work smoothly and fast in the field. Designed with ergonomics in mind, these Center Ball Heads can carry up to an impressive 8.82 lb payload.

The 492LCD model comes with standard cold shoe in aluminum, ideal to pair your camcorder with a monitor.

The 490 is a simple and reliable tool ideal for all amateur photographers looking for an easy, well-made, and affordable head.

Ergonomic Controls

The main knob and the integrated friction control guarantee full equipment control for a smooth and easy framing experience.

Independent Settings

The independent panoramic knob allows creatives to move horizontally for panoramic shots while keeping all other settings locked.

Professional QR System

Manfrotto's quick release system features the 200PL-PRO plate, compatible with both RC2 and Arca-Swiss attachments.

Product description

Compatible with all DEWALT line and spot lasers, the Laser Tripod with Titling Head is easily maneuverable and has a lightweight, durable aluminum construction. It has an integrated level, allowing the ability to establish level ground. DEWALT tripod extends open up to 72 inch height and collapses to 38 inch for storage. This self leveling laser level tripod features a 1/4 x 20-inch mount thread.

• DEWALT laser has aluminum construction
• Laser level tool is designed with collapsible legs
• Laser tripod has tilting head with integrated level
• Non-skid feet
• Carrying pouch included
• 1/4-inch x 20 thread mount

User questions & answers

Question:	Since most countertops are 34.5 inches before stone the lowest height should be an inch or two below that to allow for adjustment ... can this do
Answer:	Yes, the DW083CG will include a case.
Question:	What is the weight rating for this
Answer:	Yes, 1/4" thread for mounting
Question:	How short does this collapse 28 or 38 inches
Answer:	No, the DW083CG will project 3 spots.
Question:	Could this be extend more with dewalt dw0882 laser mounting pole
Answer:	Horizontal I think it is 2 1/2 and vertical it is 3/4

Product features

DEWALT Laser Tripod with Tilting Head

Compatible with all DEWALT line and spot lasers, the Laser Tripod with Titling Head is easily maneuverable and has a lightweight, durable aluminum construction. It has an integrated level, allowing the ability to establish level ground. It extends open up to 72” in height and collapses to 38” for storage. This tripod features a 1/4 x 20” mount thread.