14 best tripod with fluid heads

Product description

Note: Camera Not Included.

Description:

Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption and sound heat and corrosion resistance.

This tripod features a removable leg that can be converted into a monopod when attached to the included ball-adaptor.

Newly flip-lock design has a larger contact area with tripod leg that brings greater stability when shooting.

Compatible With: Canon, Nikon, Sony, Leica, Fuji-Film, Pentax, Lumix, Olympus and other DSLR cameras and video camcorders.

Comes with a durable carrying bag for convenient outdoor shooting.

STRONG STABILITY: Max. 25mm large diameter aluminium alloy tubes with load capacity up to 26.5 pounds/12 kilograms for Canon, Nikon, Sony and other DSLR cameras and video camcorders

Fluid Drag Pan Head Bubbld level: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments

Specifications:

Aluminum Alloy Tripod:

Material: Aluminum Alloy

Leg Lock Type: Flip Lock

Number of Leg Sections: 4

Folded Height: 17.9 inch/45.5 centimeter

Tripod Height Range: 24.4-71.2inches/62-181 centimeters

Monopod Height Range: 20-56.7in/51-144cm

Maximum Tube Diameter: 0.98 inch/2.5 centimeter

Load Capacity: 26.5 pound/12 kilogram

Tripod Weight: 3.17 pound/1.44 kilogram

Fluid Drag Tripod Head:

Quick Shoe: Yes

Horizontal Tilt: 360 degrees

Front Tilt: -70 degree to 90 degree

Tripod Mount Thread Size: 1/4 and 3/8 inches

Tension Control: Pan and tilt adjustment knobs

Construction: Aluminum & Plastic

Size: 3.9x4.7x3.9 inch/10x12x10 cm

Weight: 27.9ounce/0.79kg

Package Contents:

1x 2-in-1 Aluminum Alloy Tripod Monopod

1x Fluid Drag Head

1x Carrying Bag

1x 3/8 to 1/4 inch Conversion Screw

• DURABLE IN USE: Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption, sound heat and corrosion resistance
• 2-IN-1 TRIPOD MONOPOD: Features a removable leg that can be converted into a monopod when attached to the included ball-adaptor with the flexible height range from 20-56.7in/51-144cm; The center axis can be inverted to give you the option for low shooting angles
• PRECISE AND FLEXIBLE: The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional Fluid Drag Pan Head, supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens
• PRACTICAL AND ADJUSTABLE: 4-section column legs can be adjusted easily through flip type locking buckle.The height of the tripod is adjustable from 24.4-71.2 inches/62-181 centimeters, and folded to 17.9 inches/45.5 centimeters compact storage size and 3.17 pounds weight for easy carrying
• QUICK SHOE PLATE: Comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter), making it suitable for all tripods, monopods, light stands and camera sliders

User questions & answers

Question:	Can monopod feet be attached to it when it’s in monopod mode
Answer:	Yes, that is the whole point of Monopod Feature to have Neewer's Head to be attached to Monopod Foot.
Question:	The product video shows the tripod set up with the center post perpendicular to the 3 legs in order to film an overhead shot. Is this possible
Answer:	Normally the platform can be tilted forward to 93 down and can go up to 75-80 degree. In order to be able to shot 90 straight up you will have to insert the camera with the Camera Platform attached from the Front side, looking back. Then it will be possible to get straight 90 degree overhead shot.
Question:	Does this tripod head tilt enough (90 degree) to take a vertical shot
Answer:	yes, it can... even horizontal.. if you tilt the camera..
Question:	Can the head be removed? And if so, what's the thread size for the head if I wanted to replace it with a different one
Answer:	Yes, generally 1/4-20 or 3/8" thread screws (and they are included in the package), some of the models include a combo like the fluid head and a ball head, interchangeable. Haven't used the ball head, but the fluid head is terrific. Very happy with mine, I have a Nikon D7200 and 170-500 Sigma zoom on it most of the time. Hope thiis is helpful.

Product features

Neewer 2-in-1 Aluminum Alloy Camera Tripod Monopod 70.8 inches/180cm with 1/4 and 3/8 inch Screws Fluid Drag Pan Head

• Made of finely crafted aluminum alloy, it is solid and durable with efficient shock absorption and sound heat and corrosion resistance.
• Fluid Drag Pan Head Bubbld level: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments
• Compatible With: Canon, Nikon, Sony, Leica, Fuji-Film, Pentax, Lumix, Olympus and other DSLR cameras and video camcorders.
• Note: Camera Not Included.

Fluid Drag Tripod Head:

• Quick Shoe: Yes
• Horizontal Tilt: 360 degrees
• Front Tilt: -70 degree to 90 degree
• Tripod Mount Thread Size: 1/4 and 3/8 inches
• Tension Control: Pan and tilt adjustment knobs
• Construction: Aluminum & Plastic
• Size: 3.9x4.7x3.9 inch/10x12x10 cm
• Weight: 27.9ounce/0.79kg

Package Contents:

• 1x 2-in-1 Aluminum Alloy Tripod Monopod; 1x Fluid Drag Head; 1x Carrying Bag; 1x 3/8 to 1/4 inch Conversion Screw

• ★【Heavy Duty&Stability】High-strength aluminum alloy double-row tube and 60mm bowl base provide better stability .The mid-level spreaders keep the legs from collapsing on uneven ground and add stability with adjustable rubber mats.
• ★【Professional Fluid Head】The head can rotate 360° horizontally.The built-in damping and dynamic balancing system make fluid head operated smooth,can tilt +90°/-75°vertically and the max load is 13.2 lbs.
• ★【Multifunctional Quick Release Plate】With 1/4” and spare 3/8” screw, perfect for most brands of the cameras and camcorders like canon, nikon, sony. A safety button on the left side of fluid head avoids equipment falling down.
• ★【Easy Set Up& Pack】Humanized tube flip locking system,lock and loose is more convenient and fast.Tube lock make fold more quickly.
• ★【Product Features & 730 -Days Warranty】Tilt range: -75°to +90° | Pan range: 360 °| 60mm Ball Diameter | Adjustable height: 35.6" to 72 " | Max Load: 13.2 lbs | Limited 730-Days Warranty

User questions & answers

Question:	Is this compatible with the cannon vixia hf r
Answer:	I do not kniw
Question:	is it compatible with the Panasonic cameras
Answer:	Yes it is very comfortable with most of the cameras
Question:	Is this tripod compatible with the sony fdrax
Answer:	The 1/4” screw compatible to the equipment with 1/4” screw hole.
Question:	Is the panning as smooth as manfrotto? Is it buttery smooth
Answer:	Yes there is no jerkin or grinding. Very good tripod. Well built!!!

Product features

DV1000 Heavy Duty Tripod with Fluid Head Kit

• 1/4" screw is compatible for most brands of the cameras and camcorders.
• It is a heavy duty tripod and its max load is 13.2lbs.
• Fluid head with handle and level bubble provide pan and tilt drag.
• There is a safety button on the mounting platform which avoids the camere falling down.
• Flip lock enables fast setup.The mid-level spreader keep the legs from collapsing on uneven ground and add stability with rubber mats.

DV1000 Video Tripod

material: aluminum alloy

max tube diameter: 20mm

min tube diameter: 14mm

max height: 73.2"/ 186cm

min height: 32.7"/ 83cm

folded length: 35"/ 89cm

section: 3

max load: 13.2 lbs / 6 kgs

tripod and head: 8.4 lbs / 3.8kgs

Professional fluid video ballhead

60mm bowl base

Quick flip locking system

Mid-level spreader

• ★【Professional Fluid Head】Support 360°panorama and +90°/ -70° tilted. 5.7lbs lightweight with max.load 17.6lbs.Extends from 24"-70". Standard 1/4" compatible for most dslr cameras and camcorders. Extended 1/4” interface can be connected with camera accessories such as led light, microphone, etc.
• ★【Quick Installation System】Pressing installation mode makes camera fixed in 1 second.The locking knob is designed to the left side of the ball head, making the operation more convenient.
• ★【Center Column and Bearing Plat Adjust】The center column and bearing plat can be horizontally tilted 25 degrees,so no need to adjust legs if you need small adjustment.Easy to solve horizontal adjustment problem.
• ★【Monopod Function & Macro Shooting】 Separable foot tube design allows the separated foot tube to be combined with the center shaft into a monopod. The center column can be removed or installed up-side-down for low angle and macro shooting.
• ★【Easy Set Up】Flip knob makes the operation more convenient and quick,Only 22” length when 180° reverse folded, 5.7lbs weight suitable for travel and portable.

User questions & answers

Question:	Can i purchase just the tripod? i already have a manfrotto mvh502ah
Answer:	.....
Question:	Can it work with Canon eos r mirroless camera
Answer:	yes,the 4/1" srew fit for most camera.
Question:	Can the pan bar be mounted on the left side? Or is it mounted on the right side only
Answer:	Universal
Question:	Will this support a 5d mark iv with a 70-200 f/4? how sturdy is the monopod mode
Answer:	I think it will hold the camera in a locked position but at that weight it'll be difficult to tilt and pan properly. As for the monopod mode same that would be too much weight.

Product features

DF06 Professional Video Tripod Kit Combines with Fluid Head and Monopod

· The tripod is made of lightweight and high-strength aluminum alloy,Only 5.7 lbs, very good for traveling and hiking.

· Fluid head with handle and level bubble provide pan and tilt drag.

· A safety button on the mounting platform which avoids the camera falling down.

· A hook under the mid column enables to add weight and stability.

· Fluid head rotate 360° horizontally and +90°/ -70° vertically.

· Mounting platform can be inclined 25° with level bubble, easy for panoramic adjustment.

· Tilt range: -70°to +90° | Pan range: 360 °| 60 mm Ball Diameter | Adjustable height: 24.8" to 70" | Max Load: 17.6 lbs

DF06 FLUID TRIPOD

Material : Aluminium Alloy

Min.H(mm) : 24.8"(63 mm)

Max.H(mm) : 70"(1800 mm)

Folded : 22"(560 mm)

Section : 4

Ballhead: Fluid video head

Max.Load: 17.6 lbs(8 kg)

Ball head: Fluid video head

1/4 Expansion Interface

Extended 1/4” interface can be connected with camera accessories such as led light, microphone

Can Become a Monopod

Separable foot tube design allows the separated foot tube to be combined with the center shaft into a monopod

Compact & Portable

5.7 lbs lightweight and 180° reverse folded suitable for outdoor shooting.

Bearing Plat Adjustment

Fast Flip Locking System

Aluminium Alloy Triangulum

Aluminium Ally Leg Tube

• 【Easy Set-Up】The quick release flip-locks with 4-section column makes the tripod could adjust the working height from 24" to 77" in seconds. 3-position leg angle adjustment system helps you take photos flexible for different scenarios and photography conditions.
• 【Portable】19.5" compact storage size and 3.1 lbs weight make it easy to carry. You can take it to anywhere with a tripod carry case easily for outdoor shooting.
• 【Fluid Ball Head】Equipped with a professional fluid head offers 360° panning and +90°/ -70° tilt to get the perfect shot every time.
• 【Multi-use】The tripod can be transformed quickly into a monopod (35" to 82") to satisfy different shooting requirements. The center column can be inverted to provide a low angle shooting and macro shooting.
• 【Stability & Applicability】Made of aluminum alloy and with a load capacity of 20lbs make the tripod stable. Equipped with a standard 1/4" screw mount, suitable for most DSLR cameras, compact camcorders, and digital cinema cameras, and it is also great for beginners and professional photographers.

User questions & answers

Question:	How can I get extra quick release plates
Answer:	Look into the company that makes the tripod. Or you can try Amazon.
Question:	Is it compatible with iPhone 11? Thank You
Answer:	You can buy a cellphone mounting bracket here on amazon to mount on the tripod, making it completely compatible.
Question:	Are the feet replaceable and if so, what is screw mount size for the feet
Answer:	The feet just appear to be custom, thick rubber booties. My attempts to pull the booties off or unscrew them were to no avail. (I'm not going to try and force them off.) So, from that my answer is that they are not designed to be replaceable, though you may be able to find replacement booties that you can glue on in the event they fail for one reason or another.
Question:	Will this tripod let me shoot strait up or will the handle prevent me from doing so
Answer:	The video head can point down 90-degrees, but it can only point up at 70-degrees. You could get the camera to shoot straight up into the sky with a 90-degree angle if you mount the camera backward on the video head plate so the lens is looking at you and then point the camera down 90-degrees (with the lens then pointing up).

Product description

The cleverly adaptable fluid camera head. Getting perfect results quickly is hassle free thanks to the Manfrotto 128RC Micro Fluid Video Head. This smart camera head is specially designed for cameras weighing up to 4kg, and it has plenty of design friendly features to make every shoot a doddle. Professional fluidity on both the pan and tilt axes make your movements super smooth and sure. A quick release camera plate comes as part of the package, so you can set up in moments and get your camera connected fast. This video head is made to look good and last. The painted black aluminium body is designed to withstand even heavy use, and it’s versatile too. The flat base enables you to connect a variety of tripods, so you can mix and match as needed depending on the job in hand.

• Smooth fluid movement
• Secure quick release system for easy installation and removal of cameras
• Adjustable for left or right handed operation
• Supports up to 8 pounds

User questions & answers

Question:	Would this head support a 24-inch slider and a sony a7s and the 16-35mm lens? Or would I have to mount the slider directly to the tripod legs
Answer:	Yes, you can. And we recommend it, then you can monitor 7/24.
Question:	Does this stay level without tightening down with a full sized scope or big telephoto lens
Answer:	No, it can not record sound. please note.If you really need it,you can contact our customer service.
Question:	I will be using this for filming soccer games for my son on an old Bogan tripod. I concerned about the horizontal panning left to right
Answer:	Sorry, it can't be used as a real smoke detector.It just a hidden camera which looks like smoke detector.
Question:	Will fit properly on a slik 700dx tripod. will the bases line up properly. what is the diameter of the base where it meets the tripod
Answer:	It takes micro.

Product description

Warranty: 2 years

Notice: The tripod head can't be removed from tripod body.

• Half Price PRO PERFORMANCE -- Designed for digital cameras, small camcorders, iPad, mobile phones, the lightweight and professional tripod system supports devices weighing up to 15 lbs. The included middle brace holds the legs in position while also attributing rigidity and support to the tripod
• Strong, Durable but LIGHTWEIGHT -- Enhancing its portability, it weighs just 3.3 lb and is made of 90% aluminum and 10% durable plastic for easy-to-transport feature. Typically for real estate, interior, architectural, and landscape photography, where you need your scene to be as sharp as possible, often in low light conditions
• HEIGHT Winner -- A center column raises or lowers at the turn of a hand crank to let you fine-tune a height without adjusting the tripod legs. Designed to get extremely tall, this camera tripod is up to 75 inches and features a simple lever lock for much easier to unlock and lock. It is suitable for use for event and wedding coverage
• Versatility FLUID HEAD -- A built-in fluid effect video head pans a full 360°, tilts up and down, and features independent pan and tilt locks for fixed-position shots. These provide extra flexibility and more precise framing when taking selfies or group photos that you want to be a part of
• FUNCTIONAL Accessories -- To make the Victiv phone & tablet tripod even better and more complete, it does come with two quick release plates, universal phone & tablet tripod mount, carrying bag for easy transportation and 2 years warranty guarantee for worry-free

User questions & answers

Question:	Does it allow movements smooth enoght to for Youtube videos and also some outdoor photography
Answer:	Hola, gracias por preguntar, este detector de humo con cámara espía necesita de 5 a 6 horas para cargarse. Si desea ver video en vivo, simplemente conectese con su wifi. Si desea ver su grabación, conecte la tarjeta micro SD a su computadora. No es necesario descargar.
Question:	Will this work with a binocular adapter
Answer:	Hi, this hidden camera can record about 3 to 4 hours.
Question:	I have a spotter scope that I use as a telescope occasionally, it weighs about 6 lbs. Can anyone tell me if I can mount spotter scopes for hunting
Answer:	Hola, este detector de cámara oculta tardará entre 5 y 6 horas en cargarse por completo.
Question:	So this would fit my Samsung galaxy A
Answer:	I am sorry that the videos can not be shared to other phones.

• PLEASE NOTE: Compatible with Manfrotto 501HDV release plates，supports adjustable shooting angle, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens
• QUICK SHOE PLATE: Comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter), making it suitable for all tripods, monopods, light stands and camera sliders
• BUBBLE LEVEL: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments
• REMOVABLE HANDLE:It comes with a right-sided non-skid handle bar,it can be removed and installed to the left side,according to your request
• USER FRIENDLY: The side lock system allows the camera and sliding quick shoe plate as the direction of the arrows show quickly

User questions & answers

Question:	What are the operational temperatures of the fluids inside the head
Answer:	This fluid head is very rugged and should support almost anything. You will need an inexpensive adapter to fasten it to your tripod.
Question:	video camera tripod 360 degrees price
Answer:	The tension is variable so it should hold as long as the weight limit of 4Kg/8.8Lbs is not exceeded and you center the lens/scope.
Question:	Does it come with a tripod? If not which one do you recommend buying for this fluid head
Answer:	I had no problems with horizontal panning.
Question:	Are spare plates available for this head
Answer:	Hi- The plate on the bottom measures 2"1/4". It has a 3/8" threaded female socket to attach to the tripod. Thanks! Dan

Product features

Neewer Heavy Duty Video Camera Tripod Fluid Drag Pan Head with 1/4 and 3/8 inches Screws Sliding Plate

• This upgraded fluid head made of crafted aluminum alloy, it is solid and durable for executing cinematic moves with compact camcorders and DSLR video cameras. 1/4" screw and 3/8" screw hole make it possible to mount with almost all devices.
• Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep stable shooting in different environments.

Specifications:

• Quick Shoe: Yes
• Horizontal Tilt: 360 degrees
• Front Tilt: -70 degree to 90 degree
• Tripod Mount Thread Size: 1/4 and 3/8 inches
• Tension Control: Pan and tilt adjustment knobs
• Construction: Aluminum & Plastic
• Size: 3.9x4.7x3.9 inch/10x12x10 cm
• Weight: 27.9ounce/0.79kg

Package Contents:

• 1x Fluid Drag Head
• 1x 3/8 to 1/4 inch Conversion Screw
• 1x User Manual

Product description

The key feature of the 190X is the ground level adaptor which allows great shooting creativity. Once placed on the top casting and combined with the 4 leg angles, it enables the tripod to reach ultra-low positions. The legs of the 190X tripod are fast to extend and adjust, thanks to the Quick Power Lock levers. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable and rigid than with traditional lever designs. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the pre-set angles, allowing even greater positioning freedom. The top casting of the 190X has an Easy Link connector to support a photo or video accessory (such as a LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, turning the tripod into a practical mobile studio. The new XPRO fluid head is the best choice for photographers wanting to start shooting videos to expand their creativity. Thanks to its body in Aluminum and in Adaptor polymer, it is compact, portable and lightweight, weighing a mere 0.7 kg. The XPRO Fluid head has 2 levels of fluidity to switch between hard and soft fluidity according to the kind of movement preferred and to the kind of gear in use. The quick release system is used to accommodate the 200PL plate so there is no need to use different plates when switching from photo to video. The 190X and the MHXPRO-2W head are made in Italy by Monforte. Technical Specifications: Center Column rapid Center Of Gravity 2.16 in Closed Length 27.17 in Color black Column Tube Diameter 0 63/64 in Front Tilt -60 Degree / +90 Degree Leg Angles 25 Degree.46 Degree.66 Degree.88 Degree Leg Sections 3 number Legs Tube Diameter 26. 22.5. 19 mm Material Adaptor and aluminium Maximum Height 66.93 in Maximum Height (with Center Column Down) 57.09 in Load Capacity 8.82 lbs Weight 6.06 lbs.

• Center Column: Rapid maximum height: 170 cm
• Color: Black
• Column Tube Diameter: 0.63/64" (25mm)
• Leg Angles: 25, 46, 66, 88, Safety payload 4 kg

User questions & answers

Question:	I have looked at a lot of Manfrotto tripods and they problem across the entire product range are faulty legs, why is this
Answer:	It's a great tripod with the fluid head. So smooth. I use it for following model as they pass by. It is one of the best tripod I ever have.
Question:	How tall is this fully extended with center post up and with head to base plate
Answer:	Yes
Question:	What is the max height
Answer:	I’m sure if your spotter scope has a 1/4 screw mount it will work just fine. Actually, I am using with a large Vortex spotting scope and sometime with my Nikon D80.
Question:	When using this for panning shots, is it smooth
Answer:	It should. The phone mount that is included will expand up to 7 inches and the A21 is about 6.5 inches wide.

Product description

This head is the perfect synthesis between and innovative "Bridge Architecture" and manfrotto's Cutting edge engineering. A pan fluid drag system gives more ergonomic operation while a wider top plate and longer sliding plate offer extra stability and balance. This head offlbs @mmers an even more rigid structure for maximum precision and improved responsiveness. The built in easy link connectors offer extreme flexibility for accessory attachments. The counterbalance system and ball bearing drag sysem both offer precision and smoothness of operation. This head has been carefully constructed from lightweight modern materials for optimal balance of strength and size. Technical Specifications: Max Payload 13.2lbs; CSB 8.8lbs@55mm; FDS pan variable cartridge; FDS tilt variable cartridge; Tilt range +90° / -85°; Camera fixing quick release; Top plate 140mm 5.5 inches; Height 5.1in.; weight 3.5lbs.Sliding plate for the fastest camera connection and set up

• Pan fluid drag system. Base Diameter: 75 mm, Working Height: 13 cm. Weight capacity is 15.4 lbs. and counterbalance supports 8.8 lbs. Accessory Compatibility: 502HLV, 509HLV, 520BALL, 520BALLSH
• Easy Link connectors for easy attachment of accessories. Top Attachment: 1/4 inch screw, 3/8 inch screw Wider and longer top plate for extra stability
• Built in counterbalance system. Front tilt -80° / +90°
• Ball-bearing drag for precise, smooth movements.Base Diameter: 2.95 inches
• Modern materials for optimal balance of strength and size

User questions & answers

Question:	Does it have a level
Answer:	Sorry, I really don't know. I had returned this head because it seemed overly stiff and had some backlash in trying to position it. I then decided to go with the Manfrotto model MVH502AH which seems to be much smoother (actually perfect) and better built. Also, much better support. (It cost significantly more though.) According to my Manfrotto specs, that head is stated as "Do not use product at temperatures less than -30 degrees C or more than +60 degrees C (-22 F / +140 F). Hopefully the operating temperature of the Neewer would be similar.
Question:	For the MVH502 head with 75mm Half Ball, is it possible to remove the 75mm Half Ball (unscrewing it somehow) to make a flat based head 4 versatility
Answer:	I don't understand your question. You mean the price went up... blame the trade war. Or do you mean you don't know the price and are asking what it is... depends on where you are buying it. Sorry I didn't understand your question.
Question:	Does this work for a slider? Can you adjust where it sits once it is screwed on
Answer:	It is the head only, no tripod. I would recommend any tripod that is sturdy enough to hold your camera. Amazon has some Revel Tripods that are fairly inexpensive and will definitely do the job.
Question:	Will it support a loaded rig with cage, matte box, monitor, following focus and audio recorder? The weight plus camera and lens can easily tops 11lb
Answer:	Do you have the link to eBay for these? I can’t find it anywhere. Thanks.

Product features

PRO Tripod Video Head 100 with Fluid Drag

The Manfrotto 502 Pro Video Head with Flat Base (3/8"-16 Connection) is a full-featured professional head that represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto's bridging technology (inherited from the 509HD and 504HD heads). This head is designed for executing cinematic moves with compact camcorders and DSLR video cameras. The 502HD comes in two versions: the 'AH' flat-base version and the 'A' ball-base version, which is separately available.

Specification

• Weight: 1691 g
• Material : Aluminium
• Safety Payload Weight: 7 kg
• Counterbalanced Weight: 4 kg
• Tilt Drag: continuously adjustable from 0 to max level
• Pan Drag: continuously adjustable from 0 to max level
• Plate Type: 504PLONG
• Head Type: Video/Fluid Head
• Pan Bar Included: Yes
• Panoramic Rotation: 360

Product description

Note: The tripod ONLY. Other items are NOT included. Description: Quick-release mounting plate helps ensure fast transitions between shots. The legs are a 3-segment interlocking crutch-type design with a mid-level spreader providing outstanding stability for video cameras up to 26 pounds/12 kilograms . The carrying bag is large enough for convenience. The camera is attached to the ball head using a quick release video plate with a safety latch to prevent sliding off. The pan head is featured in continuous drag fluid movement for 360 degree as well as handles for more precise control. Specification: Material: Aluminum Alloy Maximum Height: 61/155cm Minimum Height: 28/71cm Loading Capacity: 26 pounds/12 kilograms Screw: 1/4 3/8'' Color: Black Package Contents: 1 x 61/155cm Aluminum Alloy Tripod 1 x Carrying Bag

• With the use of a tripod,it can achieve greater performance and maintain image quality for cropping larger picture sizes.
• With a handle for adjustment of different angles.Non-slip feet design,which keeps the tripod steady on virtual ground surface.Max load weight is 13.2 pounds/6 kilograms for optimal performance.
• Extends to 61"/155cm tall,folds to 28"/71cm.Three section aluminum adjustable-height legs.
• Compatible with many DSLR cameras,video,digital cameras,and so on.
• Includes nylon carrying case, which is convenient,lightweight,protective.Note:The tripod ONLY,other items are NOT included.

User questions & answers

Question:	where can i get spare quick release plate
Answer:	it is the actual Bosch part # 0450905002 in a Bosch box
Question:	What does it weigh
Answer:	That is the wrong picture. Good luck getting Amazon or Bosch to change it.
Question:	After 6 months legs no longer stay tight and slide down under less than 7 pound load. Any advice on how to tighten the leg flip-locks
Answer:	No
Question:	What are the differences between the black and silver tripods? why is black 10 dollars more then silver
Answer:	Yes, this filter is made to fit your 5525 cylinder Mahindra tractor.

Product features

Neewer Professional Video Tripod Heavy Duty Aluminum 61-Inch Twin Tubes

• - Supports up to 13.2 lbs, making it a perfect match for camcorder and larger video cameras.
• - Head pans 360° making it possible to shoot sports and action photos with quick release plate and 1/4" and 3/8" camera screws.
• - 3-Seciton aluminum tripod with double tandem leg design for increased stability and vibration reduction.
• - Tightened with a 75mm half-ball mount, integrated flat base with 3/8"-16 thread in the center, able to be secured to flat-mount accessories such as sliders, jibs, and more.

• Pangshi tripod fluid head: can install on DSLR Dolly Kit Skater, they are suitable for video photography with video DSLR cameras.
• Gives you full smoothness control while shooting, thanks to its variable fluid mechanisms.
• Works with camcorders and DSLR cameras with external accessories.
• Sliding quick release plate with 1/4" screw thread Fluid drag system provide smooth consistent tilt and pan controls.
• Max Load is 9lbs, very light for travel or outdoor shooting.

User questions & answers

Question:	What am I doing wrong? I can't "free" the quick release. It is in "lock" with the tiny silver post preventing release
Answer:	I’ve had my 3 years and just needed to tighten the screws, mainly from normal useage of adjusting the legs plus open and closing. It’s a good product.
Question:	How fast can you pan your camera when it's mounted on this tripod? I'm planning to video-record figure skaters, who move very fast
Answer:	Thanks for your interest.The maximum height is 66.9".We are an authorized dealer buy with confidence.
Question:	Is this a standard 40mm arca quick release plate mount
Answer:	Maximum height with enter column extended is 62.99 inches center column down 53.15 inches closed up 23.23 inchs
Question:	How would you mount this on a tripod
Answer:	Not as smooth as it should be. That part is kind of disappointing.

• 📹 Professional Video Head: Comes with 1/4 inch mounting screws which fit most standard video equipment; Standard 3/8 inch threaded screw port on the bottom makes it suitable for all tripods, monopods, light stands, and camera sliders.
• 📹 Removable assembly: fully adjustable pan/tilt arm can be operated on either side of the head.
• 📹 Ergonomic Design: Fluid head pan/tilt locking,360° pan and +90°/-83° tilt range; effortless photography and videography shooting.
• 📹 Camera safety lock: Instantly locks camera plate to head, safely releases camera and plate from head.
• 📹 Bubble level: Security locking knob can prevent equipment from falling off accidentally. The bubble level also allows for stable shooting and adaptation to different environments. (The perfect suitable monopod with ASIN: B07GW5G1GX.)

User questions & answers

Question:	Is this made of metal or plastic
Answer:	Yes, it has a level
Question:	Where or how can i purchase a second "pan/tilt/arm" for this brand and model video fluid head
Answer:	Yes Yes Yes! It is possible!!! The halfball attaches to the head using 3/4 thread
Question:	Is this head compatible with sirui p-204sr p series monopod
Answer:	Yes it does! but once its screwed onto the plate on the slider you cant adjust the position of the head, only the up and down and right to left since it is a fluid head :) hope that helped
Question:	What is the size of the screw thread on video tripods
Answer:	I use it on a Monopod with a cage, 5D3 and Tascam DR60D and it works pretty well. I'm guessing I have an all up weight of about 7 pounds. For the price its a pretty good fluid head.

Product features

Unique fluid head- KOMODO K5

Our camera head knows no rivals! Made of aircraft-grade aluminum alloy, the composition ensures both strength and durability in use. The entire main body is smooth to touch and protected from corrosion and wear through anodic oxidation treatment.

Tilt and pan movements are incredibly smooth thanks to iFootage’s patented fluid head design and can be quickly locked off and on. The quick release camera plate attachment and locking system is easy to use and very reassuring as you hear it click your expensive gear solidly into the plate.

• 2-Section Pan Bar Detachable handle can be installed on the left or right side according to your needs and the safety lock protects your camera from accidents at all times.
• Made of all-metal precision CNC and casting technologies, the fluid head is firm and stable,rotates smoothly . Its maximum load is 11 lbs/5 kg while net weight is 1.9 lbs/0.86 kg only.
• The fluid damping tripod head with the 1/4" and 3/8" screws on the top can be used to mount the camera and telescope. Bottom base diameter 2.36 in/60 mm,Standard 3/8" screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter) makes it suitable for all tripods, monopods, light stands and camera sliders.
• The video fluid head can be rotated 360 degrees smoothly on horizontal, the tilt range is -70°to 90°and the lock is firm, so that you can take photos whatever you want.
• Limited 5-Year Warranty | 24-Hour Customer Service| Max Load: 11 lb | Tilt Angle: +90° / -70° | Pan Range: 360 ° | Ball Diameter: 2.36 in/60 mm.

User questions & answers

Question:	could this be used with a Neewer monopod
Answer:	You need to push the silver post down so it is out of the way. I am able to do this with the quick release attachment.
Question:	Extra quick release plates available
Answer:	You can pan as fast as your hand moves it. The friction can be adjusted to any level you want, to make it as easy / fast as you like.
Question:	Maybe this is a silly question to some pros...Does the fluid head have a base female input that enables it to attach to a standard Amazon tripod
Answer:	It most certainly is NOT an Arca mount. Not even close. It uses a proprietary quick release plate. You cannot use an Arca plate with this head.
Question:	What is the actual weight of the tripod head
Answer:	Hi, depending on the threaded mount of your tripod you may use the 3/8" threaded mount on the swivel head or the package comes with a 3/8" to 1/4" nut if your tripod has a 1/4" stud.Hope that helps.

Product features

V-501 Fluid Head

Avella V501 Video Camera Tripod Fluid head for your , The fluid damping tripod head with the 1/4" and 3/8" screws on the top can be used to mount the camera and telescope. Bottom base diameter 2.36 in/60 mm Standard 3/8" screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter) makes it suitable for all tripods, monopods, light stands and camera sliders, 360° rotatable ball head and detachable handle make it convenient for you to adjust the angle to suit your needs better.

Due to technical updates, the original 1-Section Operator Handle was changed to a 2-Section Operator Handle

Note: Camera and tripod are not included.

Specifications

-Material: Aluminum

-Net weight: 1.9lbs/0.86kg

-Gross wight: 2.4lbs/1.1kg

-2-Section Operator Handle：10.8in/27.5cm-15.9in/40.5cm

-Diameter (bowl): 2.36"/60mm

-Tripod head height: 4.09in/104mm

-Max load weight: 11 lbs/5 kg

-Pan Rotate Angle: 360 degrees

-Tripod screw mount: 3/8" screw thread,1/4" screw thread

Features:

- Separate pan and tilt lock levers, a built-in bubble level indicator.

- Pre-set Spring-loaded Counterbalance, +90°/-70° tilt angle, 360° pan angle.

- 60mm Flat base with 3/8"-16 mounting thread,(included with a 3/8 inches to 1/4 inch screw adapter) makes it suitable for all tripods, monopods, light stands and camera sliders.

- Interchangeable 2-section Pan Bar Handle allows both right and left-handed use.

- Universal Quick Release Plate with ±20 mm sliding range, a 1/4"-20 Screw and a Spare 3/8"-16 Screw.

- Quick Release Plate is not compatible with Manfrotto Quick Release Plate.

Tilt Range

-360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting angles.

Universal Mounting

- 60mm Flat base, Standard 3/8" screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter) makes it suitable for all tripods, monopods, light stands and camera sliders.

Package Includes

• 1 x Fluid Head
• 1 x Pan Handle
• 1 x Hex Keys
• 1x 3/8 to 1/4 inch Conversion Screw
• Product Size
• Length: 3.7in / 94mm
• Width: 3.11in / 79mm
• Height: 4.09in / 104mm

Product description

This stable and sturdy yet delightfully lightweight field tripod is outfitted with outstanding features at a great value. Capable of supporting equipment loads weighing up to 13.2 lbs., the Orion Tritech II Field Tripod with Fluid Pan Head is an ideal choice for portable support of spotting scopes, cameras, video cameras, binoculars and more.



The Tritech II Field Tripod's buttery smooth, 2-way fluid pan head boasts 360-degrees azimuth motion and over 90-degrees of altitude rotation with robust pan and tilt lock levers. An adjustable-angle pan handle with comfortable grip provides exceptionally smooth pan and tilt control. For fast leveling in the field, two handy bubble levels are built into the Tritech II Field Tripod: one at the top of the tripod legs, and one at the base of the pan head.



The tripod's three-section extendable aluminum alloy tripod legs feature efficient flip-lock clamps and a metal spreader brace for extra stability. The Orion Tritech II Field Tripod with Fluid Pan Head extends to 56.5 inches with each 3-section leg fully extended. A geared center column elevator shaft with lock lever provides 11.7 inches of additional extension for a maximum extended height of 68.2 inches.



An extra-long, 3-7/8" slotted quick-release shoe with rubber pads provides a large non-slip contact surface for attached instruments. For enhanced instrument safety, a red release button must be depressed to detach the slotted shoe. The quick-release shoe remains captive even when loose, so your treasured instrument can't slip off the pan head accidentally.



In especially windy conditions, a backpack or other weight can be hung from the integrated ballast hook at the bottom of the tripod's center column to enhance stability and prevent wind-induced vibrations.



Weighs just 4.8 lbs. and collapses to 27.25" long for easy transport and storage. A soft zippered carry case with adjustable shoulder strap is included.

• Provides sturdy and portable support for instrument loads up to 13.2 lbs.
• Tripod height reaches a generous 68" when fully extended
• Features 3-section extendable aluminum alloy tripod legs with flip-lock clamps and metal spreader brace for extra stability
• Extra-long slotted 1/4"-20 captive quick-release shoe allows super-secure attachment of cameras, spotting scopes and L-adapter equipped binoculars with a non-slip grip
• Weighs just 4.8 lbs., and collapses to 27.25" long for easy portability. Includes zippered carry case.

User questions & answers

Question:	Will this work for my orion astroview 120st eq telescope
Answer:	Not sure Call Orion. They are very helpful and knowledgeable.
Question:	I have an orion goscope 80mm tabletop refractor telescope but it has a connector in the base - will it work with this tripod
Answer:	Thank you for your inquiry. That tripod will work with your telescope.
Question:	Will this tripod work for celestron 20x80 skymaster pro binoculars
Answer:	I used it with a 25x100 binoculars. It did work very well for me.
Question:	Will i need any adapter to hook it to an orion apex 127 scope
Answer:	Hello- I have a SVBONY tripod bracket that works well with my Orion Mini Giant Binoculars. I am not familiar with the Orion Apex 127 scope, but most telescopes come with a mount that slides into the mounting base of the tripod. My concern would be whether the Orion Tritech would be big enough to support the weight of the telescope.