11 best tripod mount for dslr cameras

Product description

An Amazon Brand

• Adjustable-height tripod made of lightweight aluminum; weighs just over a pound
• 3-way head allows for tilt and swivel motion; portrait or landscape options
• Quick-release plate helps ensure fast transitions between shots
• 3-section, lever-lock legs for easy height adjustments; zippered storage bag included
• Measures 16.5 inches (collapsed); extends up to 50 inches
• Not recommended for use with heavy, high-end DSLR cameras (total equipment weight should not exceed 4.4 pounds)

User questions & answers

Question:	Does any iPhone adapter work for this tripod? I have an iPhone 6s
Answer:	It would need to have the 1/4" threads on the iPhone adapter, this one will work: https://www.amazon.com/dp/B06XJFCD8L
Question:	My plate broke .. where can i get an extra one
Answer:	Yes, you can buy that part, it is called a quick release plate, and one that fits it can be found here: https://www.amazon.com/dp/B083613WCT
Question:	can this hold a nikon l340 and a sony hdr cx
Answer:	I'm not sure what size they are but it held nikon dl3100 just fine. It's basic but everything tightened up nicely. The husband sends to think we need a stronger one but I'm ok with this one. Hope this helps
Question:	Does Amazon sell spare quick release plates for this tripod
Answer:	You can buy spare quick releae plates for this tripod here: https://www.amazon.com/dp/B083613WCT

Product features

3-Way Head

Get the perfect shot with the tripod’s smooth tilt mechanism and explore panoramic possibilities with 360-degree swiveling. Turn knobs to secure.

Quick-Release Plate

A quick-release mounting plate makes it easy to remove your camera from the tripod, helping to ensure fast transitions between shots.

Adjustable Height

The tripod's legs can be individually adjusted as needed or all 3 can be raised to the full height of 50 inches. Includes rubber feet for stability.

Lightweight Design

Made of strong yet lightweight aluminum, the tripod transitions effortlessly from one spot to another and transports easily. Includes carrying case.).

Product description

LEVELHEADED, LIGHTWEIGHT TRIPOD KIT. Designed to support DSLR and mirrorless cameras or devices weighing up to 3kg (6.6lbs). With a 360° panning head and 90° tilt your GorillaPod 3K Kit is a must have for any photographer, cinematographer or vlogger.

GRIP IT. WRAP IT. STAND IT. Rubberized rings and foot grips provide enhanced stability in difficult terrain. Wrappable legs allow you to secure professional camera equipment to virtually any surface. Works with pro-level accessories like GripTight PRO Mount

• Flexible: Grip it, wrap it or stand it, wrappable legs allow you to secure professional camera equipment to virtually any surface
• Precise: 360 Degrees panning bed and 90 Degrees tilt and bubble level for optimal position control
• Modular: Works with JOBY pro-level accessories, including grip tight pro mounts, GorillaPod arms and hub adapter that allow for mounting GoPro adapters, flash clips, lighting and microphones
• Joby JB01507-BWW GorillaPod 3K Kit - Black/Charcoal and materials - ABS plastic, aluminium, stainless steel, TPE
• Versatile: Allows for mounting of lights, mics, monitors etc up to 3 kg

User questions & answers

Question:	Delivery to Vietnam - why not
Answer:	A pictorial of the included accessories can be found in the below link. ftp://ftp.panasonic.com/camera/om/dmc-zs60_en_om.pdf#page=12
Question:	Hi please can i connect my phone to this joby n how do i do it coz i dont see how
Answer:	A search on Amazon gives Photographer's Guide to the Panasonic ZS100/TZ100Jun 4, 2016by Alexander White in both paper and Kindle editions. I haven't read this book, so can't comment on its quality; but White's book on the FZ1000 is useful.I hope this helps.
Question:	What is the difference between this and the older $40 version
Answer:	Wasabi. Have purchased their batteries and chargers for several different cameras and have been very happy with them. :)https://www.amazon.com/gp/product/B005NJCFRE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Question:	So can this connect to a canon t6? cause the t6 and t6i are a bit different for their ports nstuff
Answer:	I Love the Camera and functions when it works. I did get the 3 year warranty and had to replace it after about 13 months. Last month the camera stopped again with a focus issue, I sent it in for warranty service again and this time was told the camera would not be fixed because it was damaged. The ring had a slight spot where it was hit about 6 month ago but no more than wear and tear. Panasonic declined to honor their Warranty, so if you use a camera a lot and put it in your pocket I would not recommend a Panasonic camera.

Product features

Grip It.

GorillaPod creates the perfect vlogging rig for hand-held shots.

Wrap It.

GorillaPod holds to branches & more for unlimited angles and unique perspectives.

Stand It.

GorillaPod keeps your camera level and stable on any surface.

Versatile

Mount compact DSLR and mirrorless cameras, flashes, video lights or any device weighing less than 3 kg (6.6 lbs) with a ¼"-20 tripod mount.

Precise

Features a 360° panning bed and 90° tilt and bubble level for optimal position control. Use the built-in bubble level for perfect shots in portrait or landscape mode.

Take it Anywhere

Capture unique shots from ground level to high up in a rig, with one easy to configure tripod that fits in almost any bag or backpack. This tripod is light enough to carry everywhere and strong enough to get the job done.

Product description

The serious GorillaPod for premium mirrorless camera users. This brand new design features our patented metal socket technology allowing for unmatched durability, security and delivery of the latest content by vloggers, journalists and photographers alike. Grip It, wrap it and stand it supporting premium mirrorless cameras or other accessories up to 3kg (6.6lbs).

• Flexible: Wrappable legs allow you to secure professional camera equipment to virtually any surface
• Versatile: Mount compact DSLR cameras, flashes, video lights or any device weighing up to 3 kg (6.6 lbs) with a ¼"-20 tripod mount
• Strong: Holds devices weighing up to 3 kg (6.6 lbs)
• Stable: Rubberized ring and foot grips provide enhanced stability in difficult terrain

User questions & answers

Question:	I bought the leg only option and it isn't screwing into my canon rebel t5i. Am I doing something wrong? Is the mount on my camera too small
Answer:	5he leg only is a 3/8 thread..you'll need a 3/8 to 1/4 adapter or the joby ballhead
Question:	Can it support my Canon Rebel T7 with and 18-55mm lens
Answer:	With 18-55 yes but if you have heavy lens like 85 your camera will falling off
Question:	What's the difference between this and the Ballhead X
Answer:	The red5k one has the new arca swiss release plates. Switch between devices quick without unscrewing. Also the red looks dope.
Question:	What's the different from stand and kit
Answer:	I believe the difference is that the kit has a swivel head on top of the legs and the stand just has a screw mount on top of the legs. A swivel mount is really useful for a traditional tripod but not as important for a gorilla pod. The swivel makes it easier to make small adjustments to angle/position but also is more likely to slip if you load it up with a heavier camera and lens.

Product description

The RM0861420 C-clamp camera mounting pedestal is part of Arkon’s Robust Mount Series and is compatible with all cameras with the standard 1/4”-20 camera mounting pattern, including those from Nikon, Sony, Samsung, Canon, Fujifilm, Olympus, Panasonic, and Pentax. This package includes the Heavy-Duty C-Clamp Mounting Pedestal with a 1/4”-20 Camera Mounting Bolt. The tough, low-vibration pedestal measures approximately 5 inches high (not including the holder or clamp), and is made of a combination of plastic and glass fiber. Install the C-clamp base on a desk, cart, worktable, bench, lectern, or other table-like surfaces. The C-clamp maintains a firm grip and opens as wide as 2.25 inches and closes as tight as .25 inches. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the camera at any angle. Simply screw the camera’s 1/4”-20 mounting pattern onto the mount’s 1/4”-20 mounting bolt and position the mount and camera as needed by loosening or tightening the side adjustment knob.

• Mount is compatible with cameras having the 1/4 20 mounting pattern
• C clamp pedestal attaches to desks, carts, worktables, or other table like surfaces
• The C clamp opens as wide as 2.25 inches and closes as tight as .25 inches
• 2 year limited warranty

User questions & answers

Question:	Will this mount work for the arlo pro or arlo pro
Answer:	If either of these two cameras, have a port that will fit a 1/4"-20 standard camera pattern, then yes.
Question:	Does the swivel arm section unscrew from the C-clamp? Does the swivel arm section attach to the C-clamp via a 1/4"-20 bolt
Answer:	Not easily. It attaches with four small-ish phillips screws, and doesn't appear to be any standard mount pattern. You have to peel a rubber pad to get to it. It's still a great clamp for the price though; I use these anywhere a Manfrotto isn't justified/necessary.
Question:	How tall is this mount when completely vertical
Answer:	If you clamp it to a table and make it fully vertical, it's about 145mm (5.75") from table to base of the tripod screw (assuming you leave the plastic ring on).
Question:	Does the manufacturer's paperwork have a suggested maximum weight for this clamp? wondering if it is robust enough to hold a nikon d4s
Answer:	At 2.65 lbs on the Nikon D4s, I would imagine that this clamp would hold it without a problem. It's hard to get a scale from the picture but it's actually pretty big and sturdy. It's far too large for my intended purpose - attaching it to a guitar headstock. It's heavy duty. Hope that helps.

• PROFESSIONAL GRADE SUCTION CUP CAR MOUNT provides maximum stability.
• MULTI-POSITION ADJUSTMENT for fast and secure set up on window glass, car doors, roof etc.
• STATIC MOUNT with weather proof components for interior/exterior running suspension.
• TWO EXTENSION RODS (3 & 6 inches) ensures secure placement and perfect fit.
• CAMERA GRIPPER SUCTION CUP strongly grips on any smooth, non-porous surface with sure lock lever system.

User questions & answers

Question:	on a YouTube review, someone used these stabilizing ropes with clamps for extra stablilzation of the rig to the car - does it not come with
Answer:	I use this to hold & power my Garmin 760 gps only, I know nothing about what it does for video cameras.
Question:	What the heat rating on this? If I place this on my hood of the car, the surface of the hood can reach over 120 degrees... (engine, sunlight etc
Answer:	It comes with everything in the picture but the mount for the GPS is not a battery pack.
Question:	Do this work with bm ursa mini cams
Answer:	Yes happy with choice
Question:	Is it possible mount it in the internal windshield
Answer:	yes thanks

Product features

THE MOST SECURE SUCTION CUP SYSTEM FOR YOUR CAMERA SETUP

The Camtree G-51 Camera Gripper comes equipped with 3 Industrial Grade Suction Cups that lends the entire system immense stability and sturdiness even when moving at high speeds. We have worked effortlessly on ensuring that the whole system including the legs, the joints and the camera platform is made only of the highest quality material to make this equipment super secure for all setups up to 10kg/22lbs.

Offers Perfect Moving Shots!

This Suction Cup system offers immense flexibility at nearly a quarter of the cost of some most other systems available in the market. With flexible joints at each attachment and the ability of the suction cups to adjust to the contours of any non-porous surface, this system lets you adapt itself and get in on the action. The Ball Joints on all attachments lets you adjust the entire system according to the surface within seconds and all this without the use of any tools

COMES COMPLETE WITH ALL NECESSARY SAFETY ACCESSORIES

The G-51 Suction Cup System comes with Ratchet Ropes to create safety lines and provide an additional layer of safety to the entire system. We always recommend the use of these safety lines to provide an additional layer of security and stability to the setup. All suction cups come with their dust covers to protect them from losing their adhesiveness due to dust. We recommend using these dust covers at all times when the equipment is not in use.

Product description

This is a more versatile version of Bogens single articulated arm. A telescopic features makes this product even more compact than before and a camera bracket allows precise camera angles. Arm tube diameters: 13mm.; attachment (bottom): 16mm spigot with 1/4-Inch thread; camera bracket with 16mm spigot and camera attachment; color: black; load capacity at maximum extension: 3.31 lbs. material: aluminum; maximum length: 23.82 in.; 2 sections; weight: 1.17 lbs.

• Swiveling arm; each section is separately locked. Length: 23.6".
• Comes with removable 143BKT Camera Bracket.
• 2 Section, 5/8" spigot.
• Bottom attachment: 5/8 spigot with 1/4" thread (compatible with Superclamp).

User questions & answers

Question:	Would this work with the manfrotto mkcompactacn-bk compact action tripod? from product image, it's hard to tell if this would connect or not
Answer:	For 2 reels
Question:	Do i need to buy anything else if i want to attach this to a table? and will it hold cannon 7d
Answer:	I'm not sure... I ordered one and received One.
Question:	Can this be easily used with iPhone (instead of a camera
Answer:	Sure it is very lightweight and could be hung on a pegboard. With a 100 foot cord they do become fairly heavy. I've had a few handles break so I've overcome that issue by taking mason line and looping through the mid support with a mini lasso and hanging the mason line on my hooks while it is attached to the cord winder.
Question:	Can this arm be connected with a standard tripod please? I want to build a camera support that has the shape of an inverted "L
Answer:	With it being on the the plug end this is why I did not buy for my father-inlaw as he would mount it on his 14 ft ceiling in pole barn. Instead i found one at harbor freight with the breaker on plug tap end. Bayco didn't think this through.
Question:	Is this for 2 or is it just
Answer:	I purchased this item as a gift for someone else so I don't actually have it or use it. Best suggestion: check their website at http://www.baycoproducts.com/ or contact mfr. at:BAYCO Products, Inc.640 S. Sanden Blvd. Wylie, TX 75098Phone: 469-326-9400Toll Free: 800-233-2155Fax: 855-818-7973Email: [email protected]

Product description

PRO-GRADE TRIPOD KIT. The GorillaPod 5K Kit pairs the precision engineered BallHead 5K with a premium GorillaPod 5K for a pro-grade tripod solution. Whether you’re taking photos, making movies or vlogging, this kit will support pro gear up to 5kg (11lbs).



GRIP IT. WRAP IT. STAND IT. Rubberized rings and foot grips provide enhanced stability in difficult terrain. Wrappable legs allow you to secure professional camera equipment to virtually any surface.

• Flexible: Grip it, wrap it, stand it, wrappable legs allow you to secure professional camera equipment to virtually any surface
• Efficient: Arca-Swiss system compatible quick release plate stays connected to camera for instant set-up
• Accurate: Numbered scale on base lets you accurately repeat 360 Degree pans, secondary knob locks pan separately
• Modular: Works with JOBY pro-level accessories, including grip tight pro mounts, GorillaPod arms and hub adapter that allow for mounting GoPro adapters, flash clips, lighting and microphones
• Stable and Durable: The Anodized construction delivers confident positioning in challenging terrain

User questions & answers

Question:	maybe I missed it, but are the 5k leg balls and joints made of metal or plastic? I read that they are metal on a review site of flexible stands
Answer:	5he leg only is a 3/8 thread..you'll need a 3/8 to 1/4 adapter or the joby ballhead
Question:	Does this come with the phone attachment
Answer:	With 18-55 yes but if you have heavy lens like 85 your camera will falling off
Question:	What is the difference in the GorillaPod focus and the newer version
Answer:	The red5k one has the new arca swiss release plates. Switch between devices quick without unscrewing. Also the red looks dope.
Question:	Can I use this for a canon t6? Like is it adaptable to any camera
Answer:	I believe the difference is that the kit has a swivel head on top of the legs and the stand just has a screw mount on top of the legs. A swivel mount is really useful for a traditional tripod but not as important for a gorilla pod. The swivel makes it easier to make small adjustments to angle/position but also is more likely to slip if you load it up with a heavier camera and lens.

Product features

Grip It.

GorillaPod creates the perfect hand grip for vlogging.

Wrap It.

GorillaPod grasps branches, bars & more for unlimited angles and precise composition.

Stand It.

GorillaPod delivers a level and stable shot on any surface.

Versatile

Mount pro-level DSLRs, strobes, flash or video lighting, microphone, Pico projector, speaker or any other ¼-20 device weighing less than 5 kg (11 lbs) or ⅜ mount with included adapter.

Precise

Features a 360° panning bed and 90° tilt and bubble level for optimal position control. Obtain the perfect level and optimal angles for portrait or landscape shots. The numbered scale on the base lets you accurately repeat 360° pans, and the secondary knob locks pan separately.

Take it Anywhere

Capture unique shots from ground level to high up in a rig, with one easy to configure tripod that fits in almost any bag or backpack.

Product description

The ALTA PRO 2+ 263AP is the new industry standard for an ultimate performance tripod, guaranteed to flawlessly support your camera, Key Product Highlights include: MACC (Multi-Angle Center Column System): with a unique quick action center column, you will enjoy quick, simple and intuitive “twist and lock” positioning at any angle of 15° steps. And range rotation of -90° to +90° that supports unlimited creativity. Central Column & Lock Mechanism: our mechanism offers one handed, effortless smooth operation and rapid action set-up, while our unique hexagonal central column ensures enhanced rigidity and stability. Leg Angle Selector: achieve perfect positioning and balance of the tripod to match any working terrain by using the strong and steady 4 angle leg setting options of 20°, 40°, 60° or 80° Advanced Twist-Lock: ultra-fast 35° turn to “lock” or “unlock” ensures instant leg extension/contraction. This exceptional new system is engineered to support an unmatched loading capacity in comparison to any other tripod in this segment. Superb Build Quality and Multi Featured: fitted bubble level and dedicated suspension loop to ensure perfect position and additional stability by hanging counterweight or bags; non-slip, all-weather TPU grips on 2 legs; angled rubber feet (ALTA SF spiked feet sold separately), and included bonus tripod bag. ALTA PH-32 panhead offers fantastic two handle ergonomics and precision thanks to the independent control of directions; one handle offers 360° panning and -30° to +90° back-to-front tilt, while the other maintains a side-to-side tilt range of -60° to +90°. The handle lengths can be extended or collapsed to match your changing needs. Enhanced performance features include: unique quick panorama function button for stitching panorama pictures together and the 360° scale on the base will ensure perfect matching, universal Arca-type quick release system with a built-in safety pin, and QS-60 V2 quick shoe with D-ring.

• MACC (Multi-Angle Center Column) for limitless shooting angles with firm hexagonal center column that offers one handed, effortless smooth operation and rapid set-up
• Position versatility - 3 section legs with 4 position angles - 20°, 40°, 60°, 80° and rock solid positioning - unique “locked” to “unlocked” twist leg lock system
• Alta PH-32 3-way fluid panhead with dual telescopic handles, bubble level & quick release Arca-type system (QS-60 V2 quick release plate)
• Extra stability - canopy suspension loop for counterbalance weight and Alta Link - 3/8 thread bonus connection for any accessory: reflector, articulated or flexible arms, and more
• Tripod Specifications: 26mm, 3 section aluminum legs, Folded height: 29.8". Extended height: 69". Weight: 5.7 pounds. Max. load capacity: 11 pounds

User questions & answers

Question:	Does this come with a 3/8" or 1/4" stud? I have read conflicting specs online. Some places have mentioned 1/4" while others show both
Answer:	If you're asking about the stud that attaches the ball head to the tripod, it comes with both. http://www.vanguardworld.us/photo_video_us/alta-pro-2-263ct.html#go-sectionTop That is vanguard's website. If you scroll down to specs it tells you the tripod comes with both size screws to attach the ball head.
Question:	What is the difference between the 2 and the 2Plus
Answer:	Hello! The Alta Pro 2+ 263AB 100 has been updated and redesigned both in appearance and functionality. The multi-angle center column is easier than ever to set-up, and there are unique "locked" to "unlocked" twist leg locks. The 3 section legs adjust to 4 leg angle positions: 20, 40, 60, and 80 degrees. There is a canopy suspension loop for counterbalance weight and a 3/8 thread bonus connection for use with accessories. The Alta BH-100 features an arca compatible quick shoe with safety pin and 3 independent adjustment knobs.
Question:	The headline of this ad says that the item is the alta pro 2+ 263ab but the pictures show the alta pro 263at. which is it
Answer:	The legs are the Alta Pro 2+ 263AT. The head is an Alta BH-100. Combined they make the kit which is called the Alta Pro 2+ 263AB 100.
Question:	The description says the ball head has an "arca-type" quick release. Is it arca swiss compatible? Or just similar
Answer:	I'm glad Vanguard finally switched to Arca Swiss. My Vanguard whatever-100 head is a year old and a small fraction of an inch larger than Arca Swiss. :( I replaced the clamp on my new head.

Product features

Multi-angle center column

Simplicity and technology, together like never before. The result is a simple one finger action set up of the redesigned central column and lock mechanism.

4 Individual leg positions

The re-design of the Alta Pro sees the addition of a 4th leg angle that ensures the perfect positioning and balancing for shooting in any situation.

New twist lock technology

The highly advanced 35° twist lock makes the Alta Pro 2 easier, faster and more secure than ever to set up. And the newly designed twist locks are engineered to hold unmatched loading capacities.

Connect your accessories

New Alta Connect, allows photographers to enhance their shooting scope. Alta Pro 2 is fitted with a 3/8 connector that welcomes a variety of additional accessories.

What professionals are saying

"If you are looking to invest in a tripod, I would highly recommend buying this Alta Pro 2+ tripod. Vanguard is a great company and I love their tripods- I have some that are 3-4 years old and they are still going strong, and I expect the same out of this new Alta Pro." Jay P Morgan, The Slanted Lens

About vanguard

Vanguard is a global company that designs and manufactures tripods, bags, sporting optics, and accessories. For over 30 years, our drive to disrupt mediocrity and commitment to innovation has allowed us to create the highest quality products for photographers and outdoor enthusiasts at an affordable cost.

• HIGH STABILITY: Low-profile ball head design create stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability
• WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod
• FREE ROTATION BALL HEAD: Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• SMALL AND PRRTABLE: Height only 68mm/ 2.68inches, Weight only 197g/ 0.43lbs, easy to carry
• STURDY AND DURABLE: Max Load up to 10 kg/ 352.74 ounce, made of aluminium alloy material, it is very strong and durable

User questions & answers

Question:	Is this Arco Swiss compatible
Answer:	The Denon AVR X4300H is the same form factor and a replacement for the 3313ci and the X4000. I have both the 3313ci and also the X4000. This fits like a glove exactly on top with no overhang. It is also totally silent, I have it in smart mode. Where before I was measuring 103F watching a 5.1 movie, I have it set to 82 degrees and it'd been keeping the receiver within 2 degrees of that set point. One great way to extend the life of expensive electronics.
Question:	What is the capacity/load for this
Answer:	Hi Aah924!Thank you for your inquiry.This may potentially be the option that you are needing, but depending on how your cabinet is configured, that would be the determining indicator on which unit would be more useful for your application.The AIRCOM T9 is primarily used in applications where the top would have openings to allow warm air to be exhausted. Quite a bit of modern cabinets tend to be designed around this design.The AIRCOM T8 is primarily used in applications where the rear of the enclosure would be exposed. This allows the air to be immediately re-directed out of that specified range. We refer to this as the "book shelf" styled layouts (due to it resembling the library book shelves).We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity
Question:	Is this 501 PL compatible
Answer:	Hi Tony! Thank you for taking the time to reach out to me with your question! The AIRCOM T9 does not come with "rack ears". These are however readily available through Amazon and other websites. I have included a link to the Amazon page specializing in these products (see below). https://www.amazon.com/Premium-Rack-Mounting-Ears-Screws/dp/B01JWJYY24 Thank you and have a wonderful day! Andrew Avila AC Infinity
Question:	Is this Arco Swiss compatible
Answer:	From my research all you need is a 1/2" of clearance from the top. It work's superbly and love it. Keeps my flagship reciever 20-30 degrees cooler. Hope this helps.

Product features

Neewer Low-Profile Ball Head 360 Degree Rotatable Tripod Head for DSLR Cameras Tripods Monopods

NOTE:Please use the low-profile ball head within its maximum bearing weight

NOTE: Tighten all knobs when using the low-profile ball head

• The prefect low-profile ball head design create stronger locking force and higher stability. The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
• The removable quick release plate is Equipped with 1/4 screw that is suitable for all SLR cameras and 3/8 screw hole at the bottom can be attached to tripod. or monopods.
• Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• The height of the ball head is 68mm/ 2.68inches and its weight is only 197g/ 0.43lbs. It is very easy to carry.
• The max load of the ball head can up to 10 kg/ 352.74 ounce and the aluminium alloy material makes it strong and durable.

Product description

Features:



Model: L200

Material: Aluminum Alloy

Maximum Load Capacity: 6 - 10kg / 13.2 - 22Lbs

Neck Size: 200 * 38 * 12mm / 7.9 * 1.5 * 0.5"

Screw Type: 1/4"

Bottom Thread Type: 3/8"

Plate Holder Size: 50 * 48mm / 2 * 1.9"

Quick Release Plate Size: 50 * 38 * 10mm / 2 * 1.5 * 0.4"

Plate Size: 100 * 38 * 10mm / 3.9 * 1.5 * 0.4"

Wheel Center Distance: 48mm / 1.9"

Wheel Diameter: 27mm / 1.1"

Item Weight: 543g / 19.1oz

Package Size: 22.7 * 11.5 * 6.4cm / 8.9 * 4.5 * 2.5"

Package Weight: 620g / 21.9oz



Package List:



1 * L200 telephoto lens holder

1 * 1/4 screw

1 * Quick Release Plate



Note: Tripod and Camera are not included!

• Telephoto lens support, wheels center diameter 48mm/1.9", designed for big lens
• CNC aluminum alloy construction, can support 6-10kg/13.2-22Lbs heavy load; with surface oxidized treatment, more durable
• Height adjustable to suit different lens; 1/4" screw quick release plate with non-slip rubber; horizontally moveable
• There are both 1/4inch & 3/8inch thread on the bottom for mount on tripod/photography head directly
• The dual sided neck is compatible for Arca-Swiss type mount

User questions & answers

Question:	Does this work for all tripods
Answer:	This is designed mainly for tripods with an Arca Swiss mount. However, mine does have 2 1/4-20 threaded holes and 2 threaded holes for a larger tripod head screw.
Question:	Will this fit a lens like a 70-200mm lens
Answer:	Typical 70-200mm lens that are long and not too thick should fit on this support. You may not be able to use the front support bracket if the lens is really thick.
Question:	Is this compatible with the Wimberley Gimble head
Answer:	Possibly, although, I do not have that Gimble.
Question:	How is the end piece that supports the lens mounted to the rail? Allen screws? Welded
Answer:	It slides on a rail same as how you mount the lens to the tripod. Simply loosen hand knob slide into place and retighten

• 【Upgraded Design】: The ball head of SmallRig Mini Tripod is finely laser-engraved in 5° increments from -0°-330° for tracking progressive panning, 3 position leg angle adjustment system provides flexible shooting, ideal for multi-shot panoramic photography. PLEASE NOTE we do not recommend you to adjust the screws of the leg. It can only stand in place when the leg in 130°. If you want the tripod legs angle notches/locks, please turn to BUT2666(B0833XY83V)
• 【Arca-Swiss QR Plate】: The mini tripod comes with an Arca-Swiss compatible clamp and plate for quick release and mount. With rubber-padded mount QR plate to protect your camera from potential scratches
• 【High Stability】: Made of aluminum alloy, The legs support up to 44 lbs and the ball head bears up to 4.4 lbs while weighing only 0.89 lbs. The rubber tripod feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain
• 【360 Degree Swivel Tripod Head】: Ensure 360 degree horizontal rotating and from -90 to +45 degrees tilting for panoramic photography when adjusting the angle
• 【Solid Base Support】: The rubber feet prevent the mini tripod from sliding and protect delicate surfaces, which rival traditional spikes to stabilize the tripod on soft terrain

User questions & answers

Question:	Is the quick release plate compatible with arca swiss plates? will it mount directly to my small rig canon m50 cage
Answer:	The clamp is compatible with some, but not all, Arca Swiss plates. No fault of SmallRig, but various manufacturer plates are not machined to the same tolerances. To their credit, the SmallRig seems to be best-of-class. For instance, the clamp will secure both Really Right Stuff and Kessler Kwik Plates, both superb products. I also like Joby brand X-ball, which claims to be Arca Swiss compatible, but Joby plates cannot be secured in the SmallRig clamp, though I believe the Joby clamp on X-ball will secure the SmallRig plate included on this tripod. FWIW - lever-action clamps seem to require a lot more precision than screw-lock clamps like this one. So a Really Right Stuff Arca Swiss screw lock clamp may secure a Joby plate, but a Really Right Stuff lever-lock clamp will not work with the same plate. I'm a big fan of Really Right Stuff purpose-built Arca Swiss camera plates, which are specific to each model of camera. I buy one for every camera I purchase and never remove it since they form fit the camera body, do not twist or loosen, and do not protrude or snag inside the camera bag. This little SmallRig tripod works great with Really Right Stuff Arca Swiss Plates, and by extension, also Kessler which is always designed and built to a high standard. Other makes of plates, your milage may vary because with Arca Swiss, tiny tolerances seem to make all the difference, and what should work does not always clamp securely.
Question:	which is the maximum load
Answer:	Hello, Thanks for your question to the SmallRig Mini Tripod with 360 Degree Ball Head and QR Plate. The maximum load is 5KG / 11lb (more than 10kg when Ball Head exclued） Hope my answer would help. SmallRig Sales Team
Question:	Is the tabletop tripod compatible with a gopro hero 5 black
Answer:	As long as your GoPro has a tripod adapter it will work .The tripod uses standard 1/4-20 thread, so the camera should just screw right on.
Question:	How many positions can you adjust the legs to
Answer:	They don’t lock at all so essentially you have all the way open or closed and even if all the way open - it still isn’t locked. If you have an especially sticky surface that can grip the feet maybe you can open it less but it’s not like a large tripod with multiple locking positions - there is no legs out / flat option. They stop at about 30° (ever so slightly more open than the picture). Hope that helps. The non locking legs was a big issue for me and is my only really complaint about this tripod.

Product features

For Smartphones

Phone adapter is not included in the package.

For DSLR cameras

Compatible with any DSLR camera even with lens attached.

For Projectors

Compatible with projectors with 1/4'' thread hole.

For GoPro

GoPro adapter is not included in the package.