8 best monopod with fluids

Product description

The XPRO Monopod Aluminium 4-section with Fluid Video Head is a professional full fluid video monopod made to satisfy videographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles. These state-of-the-art Manfrotto legs have inherited the perfect combination of rigidity and locking safety of professional tripod ranges, like the 190 collection and 055 collection. This monopod is equipped with Manfrotto’s full fluid base (MVMXPROBASE) featuring the innovative FLUIDTECH system that makes Manfrotto XPRO Monopod+ the first of its kind on the market to feature 3D fluidity. The FLUIDTECH video base enables the ultimate shooting smoothness on pan, tilt and swivel for an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere. The new D-shaped aluminium tubes greatly improve anti-rotation resistance throughout the monopod, following the videographer’s rapid rotation movements. Combined with the Quick Power Lock (QPL) which strongly locks the lever onto the monopod tube’s flat side, this eliminates unwanted jerky movements. The newly designed leg warmer guarantees exceptional grip and full footage control with a special version of the successful Manfrotto 500 video head . The MVMXPRO500 replaces the Manfrotto MVM500A

• FLUIDTECH base for smooth movements in all directions
• Quick power lock reliably secures & ensures super-fast set up.Maximum Working Height: 79.9 inches. Folded Length: 30.7 inches
• Newly designed rubber leg warmer for fast & secure movement
• Great operating height for overhead shooting. Dedicated professional video head
• The MVMXPRO500 has one Easy Link 3/8 inch connector to fit an external monitor or other accessories and it comes with the Manfrotto 500PLONG video camera plate

User questions & answers

Question:	How does this compare to the carbon fiber version
Answer:	Cheaper maybe a tad heavier
Question:	Several reviewers mentioned that you can't pan with one hand using a handle. But since it is a monopod, can I twist the whole tripod around to pan
Answer:	Yes you can
Question:	What is the length closed
Answer:	Approx. 26 1/2" from end to end.
Question:	Do I need to secure the camera with one hand all the time
Answer:	On flat or mostly even ground, you don't. If you want to do any kind of panning you will need to hold it.

Product features

Manfrotto XPRO Monopod+

The Manfrotto XPRO Monopod+ family of photo and video monopods brings to the market the innovative FLUIDTECH Base for smooth footage and the possibility to convert photo monopods in video monopods.

Thanks to the improved fluidity and the superior performance of the leg, the XPRO Monopod+ ensure incredibly smooth footage, ultra-sharp photos and creative shooting perspectives.

FLUIDTECH Base

First of its kind, the full Fluid Video Base delivers the ultimate smoothness in an extremely compact solution for advanced video shooting.

Quick Power Lock

Quick Power Lock system ensures extreme locking grip released with the movement of a single hand for a rapid and easy set up.

Ergonomic and easy to carry

The new aluminium d-shaped tubes together with the leg warmer guarantee excellent ergonomic grip and full control during the movement.

Versatile: Photo and Video

Thanks to the removable FLUIDTECH Base, the monopod can be easily used for both photo to video application.

• 【Compact but Durable】 Premium materials with aluminum, more lightweight, more max load weight.A folded length of 26", weighing only 3.9 lb and max load 13.2 lb , this video monopod kit is ideal for travel and fast moving situations like sporting events,travel and outdoor shooting
• 【Pivoting Mini Metal Tripod】The monopod base enables 360° swiveling, 45° tilting in all directions and 90° drop-notch allows easily switch from landscape to portrait modes; locked in the upright position via its patented Vertical Lock, the removable base can be used as a small table-top tripod
• 【Multi-function Pan Tilt Head】Features pre-set counterbalance, pan/tilt locking with 3/8" easy link connector for accessories, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
• 【Easy Set Up】This Camera Monopod Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2 lbs. The 5-section aluminum monopod leg extends to 73" fully equipped with ergonomic flip lock providing fast leg extension; by using a supplied Y-style key, the tightness of each flip-lock on the monopod leg can be adjusted according to the respective requirements
• 【Specifications】 8-years warranty | Adjustable Height: 26" to 73" | Tilt Range: -75° to +90° | Pan Range: 360° | Max Load: 13.2 LB | Carrying Bag | Fluid Head | Monopod Leg | 3-Leg Tripod Base and Monopod Travel Bag Included

User questions & answers

Question:	Nikon p1000? Anyone tried with this mono
Answer:	I have the Sony A7iii camera with 1/4" thread hole that fit with the screw on the monopod.
Question:	Is there a way to remove the tri-folding feet
Answer:	Yes it unscrews rather easily
Question:	I am considering using this with the 360fly 4k, but I'm concerned the pan bar & handle will be in the image; Can the pan bar & handle be detached
Answer:	The pan bar and handle can be detached (and it actually comes detached), but it can also be adjusted so that it doesn't show up in your image.
Question:	Is the quick release plate interchangeable with a manfrotto
Answer:	The Coman plate is NOT compatible with Manfrotto 2" slide clamps, such as the one on the Manfrotto 562B-1. The Coman is a 1 and 13/16th" slide clamp, so it's 3/16" too narrow to use with my Manfrotto clamps. Even when the clamps are fully tightened, the space is still 1/8" too wide, so the plate will slide right off. I'll post pictures with my review.

Product features

COMAN Professional Camera Tripod

Lightweight, highly durable, quick and easy to set up

KX3232 monopod + Q5 Fluid Head + 3-leg unipod holder to give you a versatile still or video camera support system.

Smooth fluid movements combined with an advanced balancing system – 360° horizontally and +90°/-75° vertically, the best choice for recording with a video camera, camcorder, or DSLR.

Q5 Fluid Head

KX3232 Monopod

• ★【Professional Fluid Head】Support 360°panorama and +90°/ -70° tilted. 5.7lbs lightweight with max.load 17.6lbs.Extends from 24"-70". Standard 1/4" compatible for most dslr cameras and camcorders. Extended 1/4” interface can be connected with camera accessories such as led light, microphone, etc.
• ★【Quick Installation System】Pressing installation mode makes camera fixed in 1 second.The locking knob is designed to the left side of the ball head, making the operation more convenient.
• ★【Center Column and Bearing Plat Adjust】The center column and bearing plat can be horizontally tilted 25 degrees,so no need to adjust legs if you need small adjustment.Easy to solve horizontal adjustment problem.
• ★【Monopod Function & Macro Shooting】 Separable foot tube design allows the separated foot tube to be combined with the center shaft into a monopod. The center column can be removed or installed up-side-down for low angle and macro shooting.
• ★【Easy Set Up】Flip knob makes the operation more convenient and quick,Only 22” length when 180° reverse folded, 5.7lbs weight suitable for travel and portable.

User questions & answers

Question:	Can i purchase just the tripod? i already have a manfrotto mvh502ah
Answer:	.....
Question:	Can it work with Canon eos r mirroless camera
Answer:	yes,the 4/1" srew fit for most camera.
Question:	Can the pan bar be mounted on the left side? Or is it mounted on the right side only
Answer:	Universal
Question:	Will this support a 5d mark iv with a 70-200 f/4? how sturdy is the monopod mode
Answer:	I think it will hold the camera in a locked position but at that weight it'll be difficult to tilt and pan properly. As for the monopod mode same that would be too much weight.

Product features

DF06 Professional Video Tripod Kit Combines with Fluid Head and Monopod

· The tripod is made of lightweight and high-strength aluminum alloy,Only 5.7 lbs, very good for traveling and hiking.

· Fluid head with handle and level bubble provide pan and tilt drag.

· A safety button on the mounting platform which avoids the camera falling down.

· A hook under the mid column enables to add weight and stability.

· Fluid head rotate 360° horizontally and +90°/ -70° vertically.

· Mounting platform can be inclined 25° with level bubble, easy for panoramic adjustment.

· Tilt range: -70°to +90° | Pan range: 360 °| 60 mm Ball Diameter | Adjustable height: 24.8" to 70" | Max Load: 17.6 lbs

DF06 FLUID TRIPOD

Material : Aluminium Alloy

Min.H(mm) : 24.8"(63 mm)

Max.H(mm) : 70"(1800 mm)

Folded : 22"(560 mm)

Section : 4

Ballhead: Fluid video head

Max.Load: 17.6 lbs(8 kg)

Ball head: Fluid video head

1/4 Expansion Interface

Extended 1/4” interface can be connected with camera accessories such as led light, microphone

Can Become a Monopod

Separable foot tube design allows the separated foot tube to be combined with the center shaft into a monopod

Compact & Portable

5.7 lbs lightweight and 180° reverse folded suitable for outdoor shooting.

Bearing Plat Adjustment

Fast Flip Locking System

Aluminium Alloy Triangulum

Aluminium Ally Leg Tube

Product description

Note: Camera Not Included.

Description:

Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption and sound heat and corrosion resistance.

This tripod features a removable leg that can be converted into a monopod when attached to the included ball-adaptor.

Newly flip-lock design has a larger contact area with tripod leg that brings greater stability when shooting.

Compatible With: Canon, Nikon, Sony, Leica, Fuji-Film, Pentax, Lumix, Olympus and other DSLR cameras and video camcorders.

Comes with a durable carrying bag for convenient outdoor shooting.

STRONG STABILITY: Max. 25mm large diameter aluminium alloy tubes with load capacity up to 26.5 pounds/12 kilograms for Canon, Nikon, Sony and other DSLR cameras and video camcorders

Fluid Drag Pan Head Bubbld level: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments

Specifications:

Aluminum Alloy Tripod:

Material: Aluminum Alloy

Leg Lock Type: Flip Lock

Number of Leg Sections: 4

Folded Height: 17.9 inch/45.5 centimeter

Tripod Height Range: 24.4-71.2inches/62-181 centimeters

Monopod Height Range: 20-56.7in/51-144cm

Maximum Tube Diameter: 0.98 inch/2.5 centimeter

Load Capacity: 26.5 pound/12 kilogram

Tripod Weight: 3.17 pound/1.44 kilogram

Fluid Drag Tripod Head:

Quick Shoe: Yes

Horizontal Tilt: 360 degrees

Front Tilt: -70 degree to 90 degree

Tripod Mount Thread Size: 1/4 and 3/8 inches

Tension Control: Pan and tilt adjustment knobs

Construction: Aluminum & Plastic

Size: 3.9x4.7x3.9 inch/10x12x10 cm

Weight: 27.9ounce/0.79kg

Package Contents:

1x 2-in-1 Aluminum Alloy Tripod Monopod

1x Fluid Drag Head

1x Carrying Bag

1x 3/8 to 1/4 inch Conversion Screw

• DURABLE IN USE: Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption, sound heat and corrosion resistance
• 2-IN-1 TRIPOD MONOPOD: Features a removable leg that can be converted into a monopod when attached to the included ball-adaptor with the flexible height range from 20-56.7in/51-144cm; The center axis can be inverted to give you the option for low shooting angles
• PRECISE AND FLEXIBLE: The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional Fluid Drag Pan Head, supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens
• PRACTICAL AND ADJUSTABLE: 4-section column legs can be adjusted easily through flip type locking buckle.The height of the tripod is adjustable from 24.4-71.2 inches/62-181 centimeters, and folded to 17.9 inches/45.5 centimeters compact storage size and 3.17 pounds weight for easy carrying
• QUICK SHOE PLATE: Comes with a dual convertible 1/4 - 3/8 inches mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter), making it suitable for all tripods, monopods, light stands and camera sliders

User questions & answers

Question:	Can monopod feet be attached to it when it’s in monopod mode
Answer:	Yes, that is the whole point of Monopod Feature to have Neewer's Head to be attached to Monopod Foot.
Question:	The product video shows the tripod set up with the center post perpendicular to the 3 legs in order to film an overhead shot. Is this possible
Answer:	Normally the platform can be tilted forward to 93 down and can go up to 75-80 degree. In order to be able to shot 90 straight up you will have to insert the camera with the Camera Platform attached from the Front side, looking back. Then it will be possible to get straight 90 degree overhead shot.
Question:	Does this tripod head tilt enough (90 degree) to take a vertical shot
Answer:	yes, it can... even horizontal.. if you tilt the camera..
Question:	Can the head be removed? And if so, what's the thread size for the head if I wanted to replace it with a different one
Answer:	Yes, generally 1/4-20 or 3/8" thread screws (and they are included in the package), some of the models include a combo like the fluid head and a ball head, interchangeable. Haven't used the ball head, but the fluid head is terrific. Very happy with mine, I have a Nikon D7200 and 170-500 Sigma zoom on it most of the time. Hope thiis is helpful.

Product features

Neewer 2-in-1 Aluminum Alloy Camera Tripod Monopod 70.8 inches/180cm with 1/4 and 3/8 inch Screws Fluid Drag Pan Head

• Made of finely crafted aluminum alloy, it is solid and durable with efficient shock absorption and sound heat and corrosion resistance.
• Fluid Drag Pan Head Bubbld level: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments
• Compatible With: Canon, Nikon, Sony, Leica, Fuji-Film, Pentax, Lumix, Olympus and other DSLR cameras and video camcorders.
• Note: Camera Not Included.

Fluid Drag Tripod Head:

• Quick Shoe: Yes
• Horizontal Tilt: 360 degrees
• Front Tilt: -70 degree to 90 degree
• Tripod Mount Thread Size: 1/4 and 3/8 inches
• Tension Control: Pan and tilt adjustment knobs
• Construction: Aluminum & Plastic
• Size: 3.9x4.7x3.9 inch/10x12x10 cm
• Weight: 27.9ounce/0.79kg

Package Contents:

• 1x 2-in-1 Aluminum Alloy Tripod Monopod; 1x Fluid Drag Head; 1x Carrying Bag; 1x 3/8 to 1/4 inch Conversion Screw

Product description

This AF34 Monopod Kit from Cayer is a 4-section aluminum video support equipped with SV5 Tripod Base and a H4 fluid tilt head, ideal choice for recording with a video camera, camcorder, or DSLR.

H4 Video Head

- Separate pan and tilt lock levers, a built-in bubble level indicator

- Pre-set Spring-loaded Counterbalance, +90°/-70° tilt angle, 360° pan angle

- Interchangeable Pan Bar allows both right and left-handed use

AF34DV Monopod Leg

- Ergonomic quick-snap locks for quick setup

- 3/8"-16 / 1/4"-20 Head mounting plate compatible with most tripod heads or cameras

SV5 Retractable Aluminum Tripod Base

- Collating with the original SV4 base, this SV5 makes the monopod kit more stable with the larger feet

- The built-in ball joint enables the monopod to swivel 360° and be tilted 45° in any direction

- A 90° drop-notch facilitate quick and accurate switching from the horizontal landscape position to vertical portrait orientation

- Used as a mini tripod, mounted with camera or tripod head via its 3/8" stud or the included tripod screw adapter

- Locked in the upright position via its patented Vertical Lock, for improved pan movement control

Specificaions:

Material: Aluminum Alloy

Mounting Platform: 1/4"; a spare 3/8" screw

Sections: 4

Max. Height: 71.2" /1810 mm

Min. Height: 27.7" /705 mm

Max Loading: 13.2 lb /6 kg

Weight: 4.3 lb /1.96 kg

Tilt range: -70° to +90°

Pan range: 360°

Packing List:

1 x AF34DV Monopod Leg

1 x H4 Fluid Head

1 x SV5 Support Stand

1 x Extra QR Plate (2 pcs in total)

1 x Rubber Foot

1 x 3/8" to 1/4" Tripod Thread Reducer Screw Adapter

1 x Shoulder Strap

4 x Hex Keys

1 x Carrying Bag

• 【Compact but Durable】 a folded length of 27.7", weighing only 4.3 lb and max load 13.2 lb , this video monopod kit is ideal for travel and fast moving situations like sporting events
• 【Pan Tilt Head】 features pre-set counterbalance, pan/tilt locking with 3/8" easy link connector for accessories, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
• 【Easy Set Up】 the 4-section aluminum monopod leg extends to 71.2" fully, equipped with ergonomic flip lock providing fast leg extension; by using a supplied Y-style key, the tightness of each flip-lock on the monopod leg can be adjusted according to the respective requirements
• 【Pivoting Foot with Mini Tripod Option】 locked down into 2 positions, it enables 360° swiveling, 45° tilting in all directions and 90° drop-notch allows easily switch from landscape to portrait modes; locked in the upright position via its patented Vertical Lock, the removable base can be used as a small table-top tripod
• 【Specifications】 Adjustable Height: 27.7" to 71.2" | Tilt Range: -70° to +90° | Pan Range: 360° | Max Load: 13.2 LB | Carrying Bag | Fluid Head | Monopod Leg | 3-Leg Tripod Base Included

User questions & answers

Question:	Can you get extra mounting plate
Answer:	Yes,worked on my wife's note 4
Question:	Will the manfrotto tripod/monopod plates work on this monopod? I currently have a manfrotto setup and just wanted to add a backup monopod
Answer:	While all of the memory chips work the reader haeware in the dash cam may limit the GB. Most of them have a limit of 32 or 64 GB. The reason is that they overwrite as there is no need to store uneventful movement
Question:	Is this solid enough to stand on its own? I’m shooting a wedding solo and was wondering if I can get this locked in place
Answer:	Hi. I think there the 2018 HD version. But not shure. I know there clear very clear. I love them i have the spotting scope also on HD and the range finder too. U won’t be disappointed
Question:	Is this monopod solid enough to use as an extension for a Gimbal like the Ronin S
Answer:	Purchased 11/06/2020. Box says assembled in Philippines. Nothing about China.

Product description

Specifications:

Material: Aluminum Alloy & ABS

Max. Height: 148cm / 58 inch

Folding Height: 57cm / 22.4 inch

Sections: 4

Max tube diameter: 23*23mm

Min tube diameter: 14*14mm

The screw on the pan head : 1/4 screw

The srew at the bottom of the pan head is: 3/8 screw

The thread at the bottom of the monopod is: 3/8 screw

Loading Capacity: 3kg

Net Weight: 1.04kg



packing list:

1 x Monopod

1 x Base support Holder

1 x Fluid Pan Head

1 x monopod bag

(Without camera)

• The monopod keeps your camera or camcorder stable and comfortable for any occasion.
• The pan head with 1/4 screw, suit for almost cameras.
• Pan head with rocker arm, adjust the camera during the shooting.
• 4-sections aluminum legs , Quick release leg lock
• May be primarily enjoyed with point-and-shoot cameras; however, it is also capable of being used as a video boom or sound boom.

User questions & answers

Question:	Does this monopod swivel
Answer:	My nikon 5500 was broken because this stick broke. Dont buy it!!!!
Question:	Can I use it with a camcorder
Answer:	No. There is a threaded metal tip at the base of the monopod that is wider at the base. The rubber piece at the bottom can adjust up and down on the threads for different surfaces but it does not come off.
Question:	Has anyone experienced issue with grease leaking out
Answer:	22.5"
Question:	Will this monopod work with my canon rebel t3 with a ef 75-300 mm lens
Answer:	When I mount a camera on it and fully extend its length, the BOTTOM of the camera actually sits at 72.5 inches above the floor.

• 【STRONG & DURABLE】Made of finely crafted aluminum alloy ，Constructed with conventional flip lock knob, non-slip rubber feet, solid and durable with efficient shock absorption, sound heat and corrosion resistance .
• 【ADJUSTABLE & FLEXIBL】 The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional Fluid Drag Pan Head, supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizens
• 【2-IN-1 TRIPOD MONOPOD】 Simply remove the center column and expand it up 59”. Whether you’re shooting wildlife or sports, it’s the perfect monopod !
• 【PRACTICAL AND PORTABLE】 4- section column legs with quick release flip-locks allow you to adjust the working height flexibly from 21" to 65" in seconds., and folded to 22inches compact storage size and 4 pounds weight for easy carrying
• 【What can you get! 】It comes with 1xCamera Tripod,1x Instruction Manual, 1x portable carrying bag convenient for outdoor use and indoor storage! With Two year warranty from our store and 24 hours of mail service.We can solve any problem for you.

User questions & answers

Question:	Does the tripod fold easily? Does it come with a carry case? What accessories are included
Answer:	If you are referring to "quick release" as something with a sliding collar to mechanically engage or disengage your equipment from this adaptor, this is not it. You have to mount this to a based or tripod, and your equipment is mounted onto it.

Product features

Q310 Tripod Overview

• 【Easy Set-Up】The quick release flip-locks with 4-section column makes the tripod could adjust the working height from 24" to 77" in seconds. 3-position leg angle adjustment system helps you take photos flexible for different scenarios and photography conditions.
• 【Portable】19.5" compact storage size and 3.1 lbs weight make it easy to carry. You can take it to anywhere with a tripod carry case easily for outdoor shooting.
• 【Fluid Ball Head】Equipped with a professional fluid head offers 360° panning and +90°/ -70° tilt to get the perfect shot every time.
• 【Multi-use】The tripod can be transformed quickly into a monopod (35" to 82") to satisfy different shooting requirements. The center column can be inverted to provide a low angle shooting and macro shooting.
• 【Stability & Applicability】Made of aluminum alloy and with a load capacity of 20lbs make the tripod stable. Equipped with a standard 1/4" screw mount, suitable for most DSLR cameras, compact camcorders, and digital cinema cameras, and it is also great for beginners and professional photographers.

User questions & answers

Question:	How can I get extra quick release plates
Answer:	Look into the company that makes the tripod. Or you can try Amazon.
Question:	Is it compatible with iPhone 11? Thank You
Answer:	You can buy a cellphone mounting bracket here on amazon to mount on the tripod, making it completely compatible.
Question:	Are the feet replaceable and if so, what is screw mount size for the feet
Answer:	The feet just appear to be custom, thick rubber booties. My attempts to pull the booties off or unscrew them were to no avail. (I'm not going to try and force them off.) So, from that my answer is that they are not designed to be replaceable, though you may be able to find replacement booties that you can glue on in the event they fail for one reason or another.
Question:	Will this tripod let me shoot strait up or will the handle prevent me from doing so
Answer:	The video head can point down 90-degrees, but it can only point up at 70-degrees. You could get the camera to shoot straight up into the sky with a 90-degree angle if you mount the camera backward on the video head plate so the lens is looking at you and then point the camera down 90-degrees (with the lens then pointing up).