14 best camera tripod with ballheads

• Carbon fiber: high-density carbon fiber, with good stability and light weight
• 360° ball head: The ball head can rotate 360° make it shooting around 360° and with horizontal bubbles, and a scale
• Adjustable and expandable: the legs of the tripod have 3 adjustable triggers and retractable ring buckles, which can be adjusted to different placemMulti-function: not only can be combined into a monopod, can be used as a trekking pole, but also can be upside down for low-angle shooting!ent positions and different shooting heights
• Multi-function: not only can be combined into a monopod, can be used as a trekking pole, but also can be upside down for low-angle shooting!
• Special design:ball head with 1/4 inches Quick -release plate,suitable for camera with 1/4 inches screw holes . weight hook for add stablity on the uneven ground

User questions & answers

Question:	Is the plate Metal or Plastic
Answer:	It is metal. The ball head will also accept any other ARCA Swiss style plate.
Question:	can you add wheels to this
Answer:	You could add wheels by getting a tripod dolly. It works with any tripod. https://www.amazon.com/gp/product/B0077M2958/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1
Question:	What is the height without center column extended
Answer:	Without center column extended, it's 56.3 inches. With two center columns extended, it's 77 inches.
Question:	My equipment uses 50mm arca-swiss plates will they work with the 38mm that comes with the tripod? if not can i replace the 38mm with a 50mm
Answer:	Yes

Product features

1/4 " Screw Quick Release Plate

Quick release plate with standard 1/4 "screw mount for fast camera connection and it is compatible with almost all DSLR cameras such as Canon, Nikon, Sony, Samsung, Olympus, Panasonic and Pentax and GoPro devices.

360° Ball Head

The ball head has two independent control knobs to facilitate the adjustment of each precise angle. 360° flexible sphere design which makes it more easy for cinema shots such as pan, tilt, and pan-tilt at the same time.

Weight Hook

With the retractable weight hook at the bottom of the center column, you can hang extra weight for additional stability which is safer for taking pictures. Non-slip rubber feet ensure that the tripod remains stable on the ground surface.

Adjustable leg angle

The 3-position angle adjustment system offers 3 alternative angles which give you the best angle and position with flexible and accurate adjustment. It allows you to shoot in narrow areas or on uneven terrain for different shooting scenarios

Product description

What factors do you need to consider when purchasing a tripod? With so many different choices from small and compact, to large and heavy, we recommend you to consider these factors and identify your needs.



How much weight can a tripod support?

The weight a camera tripod can support mainly depends on the quality of its legs. MACTREM Made it out of premium aluminum alloy, which makes it could support up to 33lbs.



What is the adjustable range of tripod height?

Normally the tripod height can be adjusted from 21. 5" To 62. 5". You can make sure the viewfinder could be at your eye level, and meet most of your photography needs. When you need to take some super low shots, you can invert the central column to do that.



What kind of tripod head?

Ball head, a type of tripod head, featuring flexible and easy to use, is built into this dslr tripod. And it allows very smooth operation while keeping the camera/lens securely tightened.



Is that convenient to carry the tripod?

Thanks to the aluminum alloy material, this camera tripod weights only 2.9lbs. And the folded length is only 16.9”. It’s very convenient to carry it anywhere with the carry bag(included in package).



Specification:

max height: 62. 5”

min height: 21. 5”

max height converted to monopod: 64”

leg lock type: flip lock

max tube diameter: 25 mm

min tube diameter: 16 mm

tripod head: ball head

tilt range: 90°

panning range: 360°

separate panning lock: Yes

quick release thread: 0.25”



Includes:

mactrem 62. 5" tripod with ball-head x 1

phone holder x 1

carrying bag x 1

wrench x 1

user manual x 1

• 【 Professional Camera Tripod with High-Quality Ball Head, Stronger Corrosion & Wear Resistance 】The high-quality ball head is easy to set, locks down tight, and has exclusive two knobs locking system for quick adjustments, keeps the camera safe from knocking down to the central column accidentally. With stronger corrosion resistance and wear resistance, the tripod is more suitable for bad weather. It’s sand prevention as well.
• 【 Super Lightweight yet Sturdy, Great for Travel 】Weights only 2.9lbs but can support up to 33 pounds. Thousands experiences proved to be amazingly sturdy. Every single column of the tripod has 4 sections and 3 quick release locks. It can be adjusted from 21.5" To 62.5". The folded height is 16.9" and a carry bag is included, great for travel.
• 【 Monopod/Alpenstock with Soft Foam Grip, Extra Phone Mount & Carry Bag 】 The travel tripod can be detached and converted into a monopod or alpenstock with a soft foam grip. The height ranges of it is from 32" To 64". The regular quick release plate and extra phone mount provide wider compatibility. You can use it with DSLR camera, micro-single camera, card digital camera, contour camera, Gopro sports camera, and etc.
• 【 360̊ Horizontal Panorama & Macro Photography, 】 Creating professional shot and amazing panorama with the 360 horizontal panorama rotation. Turn the central column downwards to support macro photography.
• 【 100% Satisfaction on Both Product & Service, 2-Year Warranty 】We offer a 2-year warranty for this camera tripod. Please feel free to CONTACT US when you have any problem or request, a service specialist will reply you within 24 hours.

User questions & answers

Question:	Can this be used with soloshot robotic camera
Answer:	The snapshot has a 1/4 and 3/8 inch tripod adaptor. The Mactrem has a 1/4 screw thread, so the camera and tripod combination will work together.
Question:	mine has some play between the column and head; is there anyway to get rid of it
Answer:	there is a black disc that you can tighten
Question:	What is the purpose of the knob on the head that is the same color as the tripod
Answer:	It's a tilt lock for the ball head, but it's more for fine adjusting whereas the black Tilt knob loosens the ball head all the way.
Question:	How sturdy is it when holding the camera in portrait orientation
Answer:	I have a Nikon d7000 and have put my 70-200 lens on it. Portrait mode is very sturdy.

Product features

HIGH-QUALITY BALL HEAD EXPANDS SHOOTING ABILITY

The high-quality ball head is easy to set, locks down tight, and has exclusive two knobs locking system for quick adjustments, keeps the camera safe from knocking down to the central column accidentally.

DETACHABLE TRIPOD FOR MACRO PHOTOGRAPHY

The central column can be inverted for some low shots. Perfect for macro photography.

360° PANORAMA PHOTOGRAPHY

The accurate 360° scale realizes precise image alignment and allows you to get perfect shot and amazing panorama.

EXTRA PHONE HOLDER & CARRY BAG

The travel tripod can be detached and converted into a monopod or alpenstock with a soft foam grip. An extra phone holder is added to the tripod for multiple purposes. The carry bag makes it easy to take it with you.

Product description

Description:

NOTE:

The calibration line must be aligned to be locked or the column can not be stable;

It CANNOT be usd as a monopod;

Carrying Bag is included;

Sandbag is NOT included.

Description:

The central column can be used vertically (at 0 /22.5 /45 /67.5 /90 Degree) or horizontally (360 Degree rotation) so that photographers can easier realize panoramic shooting, macro shooting and low angle shooting.

The metal spiral type knob on the leg is better for locking strength. Release clockwise and tighten counterclockwise.

The bubble level can find the balance of rack more quickly and confirm the accuracy of shooting better.

The leg tube is wrapped with protective sponge, which is skid-proof, sweat-proof and more comfortable to carry.

4 section leg design with Max. 28mm large diameter tubes, good stability, multiple height selection.

Metal die casting ball head can be rotated 360 degrees to help improve camera activity range when panoramic shooting.

The angle of each leg can be adjusted flexibly so that it can be used on uneven ground, steps, rocks, etc.

Comes with a hook which can hang sandbag or other heavy objects to increase the stability.

Specifications:

Material: Magnesium Aluminium Alloy

Tripod Leg Sections: 4

Max Tube Diameter: 28mm

Maximum Tripod Height: 72.4 inches/184 centimeters

Minimum Tripod Height: 25.6 inches/65 centimeters

Folded Height: 26.4 inches/67 centimeters

Length of the Center Column: 18.9 inches/48 centimeters

Weight: 4.76 lbs/2.16kg

Load Capacity: 33 lbs/15 kg

Maximum Monopod Height: 56.9 inches/144.5 centimeters

Minimum Monopod Height: 20.7 inches/52.5 centimeters

Package Contents:

1x Camera Tripod with Center Column

• ROTATABLE TRANSVERSE CENTER COLUMN: The central column can be used vertically (at 0 /22.5 /45 /67.5 /90 Degree) or horizontally (360 Degree rotation) so that photographers can easier realize panoramic shooting, macro shooting and low angle shooting. Please Note: The calibration line must be aligned to be locked or the column can not be stable; Carrying Bag is Included
• UPGRADED DESIGN: The angle of each leg can be adjusted flexibly so that it can be used on uneven ground, steps, rocks, etc. Comes with a hook which can hang sandbag or other heavy objects to increase the stability; 3/8-inch screw hole under the bubble level allow you to use more photographic equipment such as magic arm, monitor and LED lights
• PREMIUM CONSTRUCTION AND STRONG STABILITY: Max. 28mm large diameter magnesium aluminium alloy tubes with load capacity up to 33 pounds/15 kilograms, and non-slip feet design provide security and stability support for your DSLR cameras; Dense sponge grips on the leg is anti-skid, defensive cold and keep warm
• PRACTICAL AND ADJUSTABLE: The length of the 4 legs can also be adjusted easily through spiral type locking knob. The height of the tripod can be extended to Max. 72.4 inches/184 centimeters and folded to 26.4 inches/67 centimeters for easy carrying; Length of the center column: 18.9 inches/48 centimeters. One of the leg can be removed to change into a monopod (52.5-144.5cm) or walking stick.
• PRECISE AND FLEXIBLE: The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional 360-degree metal rotating ball head to provide panoramic shooting. QR plate with 1/4-inch screw is compatible with Canon Nikon Sony and other cameras camcorders

Product features

Neewer 2-in-1 Camera Tripod with 360 Degree Rotatable Center Column and Ball Head QR Plate

Product description

LEVELHEADED, LIGHTWEIGHT TRIPOD KIT. Designed to support DSLR and mirrorless cameras or devices weighing up to 3kg (6.6lbs). With a 360° panning head and 90° tilt your GorillaPod 3K Kit is a must have for any photographer, cinematographer or vlogger.

GRIP IT. WRAP IT. STAND IT. Rubberized rings and foot grips provide enhanced stability in difficult terrain. Wrappable legs allow you to secure professional camera equipment to virtually any surface. Works with pro-level accessories like GripTight PRO Mount

• Flexible: Grip it, wrap it or stand it, wrappable legs allow you to secure professional camera equipment to virtually any surface
• Precise: 360 Degrees panning bed and 90 Degrees tilt and bubble level for optimal position control
• Modular: Works with JOBY pro-level accessories, including grip tight pro mounts, GorillaPod arms and hub adapter that allow for mounting GoPro adapters, flash clips, lighting and microphones
• Joby JB01507-BWW GorillaPod 3K Kit - Black/Charcoal and materials - ABS plastic, aluminium, stainless steel, TPE
• Versatile: Allows for mounting of lights, mics, monitors etc up to 3 kg

User questions & answers

Question:	Delivery to Vietnam - why not
Answer:	A pictorial of the included accessories can be found in the below link. ftp://ftp.panasonic.com/camera/om/dmc-zs60_en_om.pdf#page=12
Question:	Hi please can i connect my phone to this joby n how do i do it coz i dont see how
Answer:	A search on Amazon gives Photographer's Guide to the Panasonic ZS100/TZ100Jun 4, 2016by Alexander White in both paper and Kindle editions. I haven't read this book, so can't comment on its quality; but White's book on the FZ1000 is useful.I hope this helps.
Question:	What is the difference between this and the older $40 version
Answer:	Wasabi. Have purchased their batteries and chargers for several different cameras and have been very happy with them. :)https://www.amazon.com/gp/product/B005NJCFRE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Question:	So can this connect to a canon t6? cause the t6 and t6i are a bit different for their ports nstuff
Answer:	I Love the Camera and functions when it works. I did get the 3 year warranty and had to replace it after about 13 months. Last month the camera stopped again with a focus issue, I sent it in for warranty service again and this time was told the camera would not be fixed because it was damaged. The ring had a slight spot where it was hit about 6 month ago but no more than wear and tear. Panasonic declined to honor their Warranty, so if you use a camera a lot and put it in your pocket I would not recommend a Panasonic camera.

Product features

Grip It.

GorillaPod creates the perfect vlogging rig for hand-held shots.

Wrap It.

GorillaPod holds to branches & more for unlimited angles and unique perspectives.

Stand It.

GorillaPod keeps your camera level and stable on any surface.

Versatile

Mount compact DSLR and mirrorless cameras, flashes, video lights or any device weighing less than 3 kg (6.6 lbs) with a ¼"-20 tripod mount.

Precise

Features a 360° panning bed and 90° tilt and bubble level for optimal position control. Use the built-in bubble level for perfect shots in portrait or landscape mode.

Take it Anywhere

Capture unique shots from ground level to high up in a rig, with one easy to configure tripod that fits in almost any bag or backpack. This tripod is light enough to carry everywhere and strong enough to get the job done.

Product description

Harwerrel tripod mini ball head makes adjusting your camera to nearly any position quick and easy. Simply loosen the knob, and rotate, tilt and pan your camera or camcorder with complete fluidity. And when a 90-degree angle is desired, simply lower the platform into the notch. Designed for smartphone, Gopro, compact DSLR, light stand.



Specification:

Material: Aluminum alloy

Maximum Load: 4kg / 8.82lbs

Pan: 360 degree

Ball Diameter: 26mm / 1.02in

Base Diameter: 35mm / 1.38in

Height: 60mm / 2.36in

Item weight: 131g / 0.29lb

Screw Mount: (Top)1/4" thread. (Bottom)1/4" and 3/8" thread.



Package Content:

1 x Mini Ball Head

• Designed for smartphone, Gopro, compact DSLR, light stand.
• 360 Degree Swivel: Can be adjusted to any angle.
• Material: Aluminium alloy. High quality and durable.
• Screw Mount: (Top)1/4" thread. (Bottom)1/4" and 3/8" thread.
• Load capacity: 4kg / 8.82 lbs.

User questions & answers

Question:	How heavy an item can it hold
Answer:	Yes, but you will need a tripod adapter that you can screw into the hole under the cap on the front of the bridge.
Question:	Can this replace a quick release head on a sirui t-005x
Answer:	Yes mine did come with the Glasspak

Product description

Dolica's 62" Aluminum Proline Tripod is ideal for both indoor and outdoor photography. It is perfect for events, sports activity, capturing that one amazing shot. Designed for use with Point-N-Shoot cameras and / or Digital SLR cameras Tripod Features: Professional Aluminum alloy construction and able to support up to 13.2 lbs. Base thread: 3/8". Includes ballhead, quick release plate and bubble level. 90 degree vertical platform. Standard-wide angle, semi-wide angle, full-wide angle. Quick release leg locks and non-slip rubber feet.

From the Manufacturer

Proline Series AX620B100 Professional Alluminum Alloy Tripod and Ball Head Combo

 

Tripod and Ball Head Technical Details

Maximum height column↑: 60 inches

Maximum height column↓: 51

Minimum height column↑ : 32.5 inches

Minimum height column↓ : 21.5 inches

Closed height: 22.5 inches

Net weight: 2.5 lbs

Max weight: 13.2 lbs

Leg sections: 4

Material: Lightweight aluminum alloy

Color: Black

• Ball Head Technical Details
• Base thread: 3/8 inch
• Quick release thread: 1/4 inch
• Panoramic angle: Horizontal 360°
• Material: lightweight aluminum alloy
  
  
• Color: Black
  
  

Premium features

Rapid stabile center column

Reversible locking center column

Durable flip leg locks

Non slip rubber feet with retractable spike

Closed cell NBR grips

Integrated tripod bubble level and compass

3-position leg angle adjustment locks

Counter weight hook

Best feature

Its stylishly made well, engineered with professional features, and priced to be in every household ~Be the Photographer~

• Includes a tripod carry case
  
  

Features

• 62" Aluminum Proline Tripod
• Support up to 13.2 lbs
• Ballhead, quick release plate and bubble level
• Quick release leg locks and non-slip rubber feet

User questions & answers

Question:	This does not appear to be a true "Ball Head." It appears that you have to swivel the apparatus around in order to achieve complete coverage
Answer:	Yes, this DAC can
Question:	Can you change the ball head on this
Answer:	Hi, it's also a standard line/auxiliary out. Thank you.
Question:	What is the smallest it can be folded to fit into a backpack
Answer:	I use this to switch between my Rotel Power amp (130 Watt RMS X 2) and a Vintage JVC Quadraphonic Receiver. (100 X 2 or 43 X 4) to switch the same set of front speakers for both. In the 6 months having done this, the sound is right on and no difference in quality. I do think the 100 watt rating is conservative, since I have no problems with 130 watt RMS on the one amp. I am very happy with this unit.
Question:	What is the difference between the 60" and 62" that the 60" is more costly
Answer:	No. Your preamp connects to your amp with RCA cables (or XLR) and this unit switches using the speaker wire outputs off of an amp.

• 🌿 |360 Degree Swivel|: PERGEAR Ball Head Weights Only 406g/14oz, but Provides 8KG/17.6lbs Loading Capacity. PERGEAR Ball Head Equips with 3 Knobs for Horizontal/Vertical/Side Adjustment, Set Your Camera at Any Angle
• 🌿 |More Stable|: Pergear Tripod Ball Head is with Fine Tuning Damping to Protect Your Device from Sudden Plunge
• 🌿 |More Precise|: Both Horizontal and Vertical Bubble Level to Enhance Perception of Position. The Base is with Index Marking to Indicate more Precise Control
• 🌿 |Switch Into Vertical Mode Easily|: With A U-Shaped Groove Design, You Can Easily Switch Into Vertical Shooting Mode from Horizontal Mode, and Vice Versa
• 🌿 |Duarable Metal Body|: Superior Aluminum-Alloy Construction, CNC Precision Finishing, Anodized Surface

User questions & answers

Question:	Can this be used on a manfrotto befree tripod ? thx
Answer:	Not really sure if it will wreck asphalt it is tho some heavy duty cleaner so maybe put an aluminum pan under your car to catch the drippings
Question:	What is the maximum recommended camera weight this mount is rated for
Answer:	Both, This is concentrate and it needs to be mixed with water.
Question:	How do I attach this to my tripod
Answer:	I believe Cal Brite can be used on an indoor evaporator cool, while any Brite can ONLY be used on the outdoor condenser.
Question:	where can I buy a spare quick release plate
Answer:	The Product is corrosive and a the SPRAYER NO 50P POLY (4770-0) should be used, however if it is for a one time application and you wash the sprayer thoroughly after use, you should be fine. please confirm that the plastic on the sprayer is durable and not susceptible to corrosive elements.

Product description

NOTE: Camera and tripod are not included.

Description:

It comes with a non-skid handle bar, convenient Turn the Ball Head with handle in the film,ideal for outdoor and indoor professional shooting, allowing quick level adjustment and precise shooting.

with 3/8 inch Bottom Screw Thread and 1/4 inch screw mount quick shoe plate, compatible with Tripod, Monopod, Slider, DSLR Camera, Camcorder

360 Degrees Swivel, equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Security locking knob can well prevent the equipment from falling off accidentally

professional bubble levels help to keep the balanced shooting to adapt to different environments

Special anti-slip rubber pads protect the Camera from any damage due to mounting

Material: Metal & Plastic

Handle length: 3.94 inch/ 10 centimeter

Bottom Diameter: 1.97 inch/ 5 centimeter

Quick shoe plate length: 1.97 inch/ 5 centimeter

Package Contents:

1x Ball Head with handle

• REMOVABLE HANDLE: It comes with a non-skid handle bar, convenient Turn the Ball Head with handle in the film,ideal for outdoor and indoor professional shooting, allowing quick level adjustment and precise shooting
• 360 DEGREE SWIVEL: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle
• 3/8 INCH BOTTOM SCREW THREAD: Ball Head Comes with 3/8 inch Bottom Screw Thread, You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing
• BUBBLE LEVEL: Security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the balanced shooting to adapt to different environments
• 1/4 INCH QUICK SHOE PLATE: Compatible with Arca-Swiss Standard for Tripod Ballhead; CNC machined light weight aircraft aluminum, Special anti-slip rubber pads protect the Camera from any damage due to mounting

User questions & answers

Question:	Does peak design capture plate fit securely into the arca-swiss clamp
Answer:	The pull is about 3 inches
Question:	How good is this one for heavy body & lens combos? Say a 600mm lens
Answer:	If this is the one that fits where your poop hose goes then no it doesn’t have threads. There are 2 different styles. The first connects just like your poop hose does and then the hose connects to the waste valve just like before. The other style has to be glued on just like pvc pipes are. You will have to cut off the end of the of the sewer pipe where you would connect your poop hose and then glue the new Valterra valve onto the pipe and then your poop hose would connect just like it did. I would not recommend the glue on style because it is then permanent and can’t be taken off again.
Question:	Will it hold and stabilize astronomy binoculars (10 lbs
Answer:	It is metal free. I bought one for my reef tank as well.
Question:	How do you read the level? The bubble doesn't go into the red circle
Answer:	Yes, it can be unscrewed if needed.

Product description

Note:

1.Camera not included.

2.For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally for better balance.

3.Includes nylon carrying case,which is convenient,lightweight,protective.Note:The tripod ONLY,other items are NOT included.

Description:

Quick-release mounting plate helps ensure fast transitions between shots.

The legs are a 4-segment interlocking crutch-type design.The center column design with a hook, can be attached to sand bag to increase stability.

The carrying bag is large enough for convenience.

360 degree dial of swivel ball head with bubble level provide you with a panoramic view.Three position leg angle adjustment system provides flexible shooting.

Specification:

Material:Carbon Fiber

Maximum Height:66 inches/168 cm

Minimum Height:17.7"/45cm

Loading Capacity:33lbs/15kg

Screw:1/4"

Color:Black+Red

Package Contents:

1 x 66inches/168 cm Carbon Fiber Tripod

1 x Carrying Bag

• With the use of a tripod, it can achieve greater performance and maintain image quality for cropping larger picture sizes
• 2-in-1 tripod, removed one leg can be used as monopod and converted into alpenstock
• Extends to 66"/168 cm tall,folds to 17.7"/45cm.Four sections Carbon Fibre adjustable-height leg tubes
• Center column design with hook attached to sand bag increasing stability, with non-slip feet design to keep the tripod steady.Max load weight is 33lbs/15kg for optimal performance
• 360 degree dial of swivel ball head with bubble level provide you with a panoramic view.Three position leg angle adjustment system provides flexible shooting

User questions & answers

Question:	Where can i get a 5/8 x 18 tpi to 1/4-20 unc adpater
Answer:	Maybe you mean ⅜"-18? https://www.amazon.com/Fotasy-SR10-Reducer-Bushing-Convert/dp/B00BJW3082/ref=sr_1_1?keywords=%C2%BC-20+to+%E2%85%9C+thread+adapter&qid=1578433237&s=photo&sr=1-1
Question:	Is this a sturdy shake free tripodm
Answer:	It fell apart the 2nd day I used it. One leg came completely out, couldn't get it back in & another let got stuck extended!
Question:	What's the difference between the original and the upgraded version
Answer:	It has a higher load capacity
Question:	have canon 5D mk iii and prime lens 70-200 f2.8. will this tripod take the weight of both without shaking
Answer:	Yes. I have been shooting all week with a Canon 70D and 17-55mm and 300mm zoom lens. Nice and stable

Product features

Neewer 2-in-1 Carbon Fiber 63"/160cm Tripod Monopod with 360 Degree Ball Head, 1/4"Quick Shoe Plate and Bubble Level Including Carrying Bag

Please Note:

• Camera not included.
• For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally for better balance.
• Includes nylon carrying case, which is convenient, lightweight, protective.

• Ultra Stable - High quality aluminum alloy camera tripod, lightweight but ultra sturdy. Center column with spring hook at the bottom for hanging goods to increase stability. Non-slip rubber feet ensure stability on different surfaces. Loading Capacity - 17.6lbs/8kg
• Panorama Ball Head and Inverted Column: Rotatable ball head and 360 degree horizontal panorama design with 2 independent locks allow you to get free shooting angles and amazing panorama. Center axis can be inverted for ultra low angle and macro shooting. Bubble level indicator make sure to get the straightest shot
• 2-in-1 Tripod and Monopod - 4-section column legs with quick release flip-locks allows you to adjust the working height from 17 inch to 64inch in seconds. One leg can be quickly disassembled and connected to the center pillar transforming into a monopod. Monopod enables more flexible shooting, also using as trekking pole
• Portable - Tripod legs can be inverted and folded back 180 degrees, saving length to 18.5inch compact storage size, which is easy to carry and pack for travel. The weight is only 2.97lbs/1.35Kg
• We would like to provide a second quick release plate within 30 days. Any problems or questions, please feel free to contact us, we will get back to you within 12 hours

Product features

Why choose an ESDDI camera tripod TP-40

The ESDDI TP-40 camera tripod is a professional aluminum tripod. Its strong aluminum alloy body can load 8KG camera equipment, even if you use heavy telephoto lens, it can easily do the job.

Moreover, we also equipped it with a professional panoramic Gimbal. This gimbal is usually equipped on a tripod with a high quality. Not only that, we also let it support monopods and can reach up to 78 inches.

Coupled with a professional thickened tripod backpack, we believe that this User-friendly ESDDI TP-40 camera tripod is your best choice.

Product Description

Item Color: Black Item

Material: Magnesium aluminum alloy

Weight: 2.97lbs /1.35kg

Section: 4Max.

Tube diameter: 0.92" / 23.3mm

Folded Length: 18.5" / 470mm

Max. Height: 64" / 1625mm

Height without center column: 52.36" / 1330mm

Tilt Range: -45° / +90°

8KG Load

Thanks to its 8KG load and 1/4" quick release plate. ESDDI TP-40 can support Canon, Nikon, Sony and other cameras and telephoto lens.

78 Inches Monopod

Supports up to 78-inch Monopod shooting, and can also be used as a Trekking Pole for your mountain climbing.

Easy to Carry

Aluminum alloy material & reverse design. The minimum length is 18.5 ", so you can pack it or hang it on your camera bag.

Product description

TURN YOUR WORLD UPSIDE DOWN. Take previous limitations out of the equation with the GorillaPod SLR Zoom Tripod and Ballhead Bundle. The 360 pan gives you extra-versatility as increase the range of shots you’re capable of. There’s no room for hesitation when you unleash your creativity, which is why the quick release plate allows you to seamlessly transition when on the go. The flexible, wrappable legs will secure your camera up to 6.6 lbs. With over two dozen flexible joints, the legs will stay secure, even when you’re stuck between a rock and a hard place. The rubberized ring and footgrips keep your gear standing strong, or you can utilize the octopus style tripod to wrap around almost any structure, from fences to trees. Weighing less than 2 lbs. total, this ultra-light tripod and ballhead bundle fits easily in your camera bag or backpack, so you can take it virtually anywhere. COMPATIBILITY OPTIONS. Made out of durable, yet lightweight ABS plastic, zinc-aluminum, TPE Grip pads, and stainless steel, the JOBY GorillaPod SLR Zoom Tripod and Ballhead Bundle will never let your camera slip out of its grasp. Designed for SLR and mirrorless cameras up to 3 kg. (6 lbs.), you’ll get the sturdy structure you need, for the images you want. With a ¼”-20 thread standard tripod mount, you can easily use it with other JOBY tripods and stands. Give yourself the tools you need to take better photos and smoother videos with the GorillaPod SLR Zoom and Ballhead Bundle, the ultimate versatile tripod.

• STAND STRONG. Get crisper shots with this durable, lightweight tripod. The rubberized foot grips and wrappable legs will secure professional cameras up to 6.6lbs. as they hold their stance to any viable surface
• CAPTURE SUPERIOR PERSPECTIVES. Look at life from a different point of view with the GorillaPod SLR Zoom Tripod and Ballhead Bundle. Easy maneuverability and precise positioning with 360 panning, to expand the range of shots you can capture
• GROUND DOWN. Get ultra-stable and find your grounding with over two dozen leg joints and German TPE joins, so you’ll never have a shaky shot. The GorillaPod SLR Zoom can fiercely secure equipment up to 6.6 lbs., making the impossible shot, possible. Strong enough to hold a telephoto lens
• SET UP WITH EASE. Take this lightweight SLR and mirrorless camera tripod anywhere. The quick release plate simply stays connected to your camera, so you can interchange with ease. Hold on tight with the 1/4”-20 standard tripod mount and 3/8” adapter
• MADE TO LAST. Made of durable Japanese medical-grade ABS plastic, stainless steel, and German TPE, it’s made for the wear and tear of everyday life, or the rigor of adventure. Pair it with your mirrorless camera or SLR to capture the worthy moments of life

User questions & answers

Question:	Does this work with Sony a
Answer:	You have to ask the manufacturer.
Question:	Is there a trick/tip to mounting this to vertical pole so that it stays secure
Answer:	I get a mount out of a selfish stick, use the mount to hold the phone and install the mount to this gorillapod
Question:	Is it waterproof
Answer:	The older $40 one does not include a ball head, unless you buy it as a kit, but then it is more than $40.
Question:	do you need optional ball head
Answer:	Yes, it will definitely work very well with a Canon T6

Product features

Flexible, wrappable legs

Allow you to secure your camera almost anywhere, indoors or out.

Stability on any surface

Rubberized ring and foot grips provide stability on uneven terrain, and grip securely when bending around branches or poles.

Lightweight and portable

Fits easily in your camera bag without adding extra weight, yet is durable enough to withstand years of use.

Designed for SLR and Mirrorless Cameras

With zoom lenses, camcorders or external flashes, weighing up to 3 kilogram (6.6 pounds).

Ballhead with quick-release clip and bubble level

Set up quickly, fine tune/adjust shots or easily switch between portrait and landscape orientations.

Securely mount cameras or tripod heads

With universal stainless steel 1/4 inch-20 tripod screw or included 3/8 inch adapter.

• DURABLE IN USE: Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption, sound heat and corrosion resistance
• 2-IN-1 TRIPOD MONOPOD: Features a removable leg that can be converted into a monopod when attached to the included ball-adaptor with the flexible height range from 19.6-55 inches/50-140 centimeters; The center axis can be inverted to give you the option for low shooting angles
• PRECISE AND FLEXIBLE: The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional 360-degree metal rotating ball head with two independent control knobs to provide panoramic shooting to get the perfect shot
• PRACTICAL AND ADJUSTABLE: 4-section column legs can be adjusted easily through flip type locking buckle.The height of the tripod is adjustable from 22.8-66 inches/58-168 centimeters, and folded to 17.9 inches/45.5 centimeters compact storage size and 3.17 pounds weight for easy carrying
• STRONG STABILITY: Max. 25mm large diameter aluminium alloy tubes with load capacity up to 26.5 pounds/12 kilograms for Canon, Nikon, Sony and other DSLR cameras and video camcorders

User questions & answers

Question:	If i'm in a tight spot and can't bring the full tripod can the monopod work with a monopod stand base three feet support
Answer:	Cable-driven.
Question:	What is the plate made of
Answer:	It should fit most LS applications with 102mm intake manifolds & CABLE-DRIVEN throttle body & 4-bolt mount (3-bolt to 4-bolt adapter available, if needed).
Question:	Will it hold a spotting scope
Answer:	Its has a 351W firing order.
Question:	Can the monopod work with a monopod stand base three feet support
Answer:	Hello,I put this cam in my 88GT 347 4 summers ago and I love it!!! I went to comp cams when I started building my 347 and told them I wanted a motor that I could drive to work ,errors, highway like any car. I wanted to be able to sit at a stop light and not worry the thing would quit, sputter like other high performance cars and boy did they deliver with this cam!! It makes power right from idle to 5500rpm. I mean when you hit it, its all there just hang on. But if you want to make power at higher rpms than I wouldn't use this cam. But if you want all around use able street car, then this is the cam to have. Hot Rod mag did a article on this cam 4 years ago, and said that Ford should have used this cam in all the 5.0 back then, it was that good. But like I said it is low rpm cam that will make you crap your pants when you hit it!!! Also it has a nice lobe after my motor gets up to temp sitting at the stop lights. I hope this helps, good luck.

Product features

Neewer 2-in-1 Aluminum Alloy Camera Tripod Monopod with 360 Degree Ball Head 1/4 inch QR Plate and Carrying Bag

Description:

• Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption and sound heat and corrosion resistance.
• A professional 360-degree metal rotating ball head with 2 independent control knobs provides panoramic shooting.
• The center axis can be inverted to give you the option for low shooting angles.
• The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position.
• Compatible With: Canon, Nikon, Sony, Leica, Fuji-Film, Pentax, Lumix, Olympus and other DSLR cameras and video camcorders.

Ball-head:

• Tilt Range: -45/+90 degree; Panning Range: 360 degree
• Separate Panning Lock: Yes
• One Built-in Bubble Level Indicators
• Head Mount Thread: 3/8 inch; QR Plate Thread: 1/4 inch

Package Contents:

• 1 x 2-in-1 Aluminum Alloy Tripod Monopod TM254
• 1 x Carrying Bag

Product description

Are you serious about photography?

It's essential to own a tripod, so you can be sure that you don't end up with blurry images from a shaky hand.

Plus, some of the best images that have been captured by photographers are ones that are shot with the support

and stability of a tripod.



Monan AZ-310 tripod/monopod is an outstanding choice for professional and budding professional photographers

looking for an option that has all the bells and whistles.

More you know:

1.Lightweigh Design: Weighting only 3.44 lbs, converts into a 61.4 inches tripod and monopod that can

then adjust and fold back to a more travel-friendly size of 13.8 inches. (MeFoto carbon fiber tripod is 4.2lbs with minimum size of 16.1 inches)

2.Unique Axis Inversion Design: All Moman Monopod tripod legs can also be locked at separate angles to

enable shooting on irregular or uneven ground.

3. Flexible Ball Head Design: Featuring a Aluminum Alloy ball head, the aluminum travel monopod tripod

offers three lock knobs as well as 360-degree panoramic panning for full field view.

4.User-Friendly Design:Installing the hook on the base of the Camera Tripod enables to add more heavy objects.

Specially, flexible change from Tripod to Monopod, also fitting as an alpenstock.

Specification:

Product weight:3.44 lb

Working height:13.8 in to 61.4 in

Folding height:13.8 in (width 3.1 in)

Product material:Aluminum alloy

Tripod section number:5

Pipe size: 1 in maximum / 0.5 in minimum

Weight capacity:33.07 lb

Adaptable: All kinds of SLR camera, mirrorless camera of Canon, Nikon, Pentax, Sony, Olympus.

Head Type: 360° Swivel Fluid Head

Column Quantity: 5 sections

Max Tube Diameter: 0.98 in

Min Tube Diameter: 0.51 in

Package:

1*AZ-310 tripod with 1*KF-0 ball head

1*Carrying Bag

1*Adjustable wrench

1 * Wrist strap

• 📷Get 1 L-shaped Camera Mount, Add Both into Cart! 【Lightweight and Heavy Duty】The Moman Monopod Tripod uses the new Aluminum alloy to ensure lightness and stability of foot tube and avoid coke or hand shaking, which is the most intimate companion for you and your camera.
• 【Unique Axis Inversion Design】Enjoying a unique axis inversion design, the Moman monopod tripod not only provides various shooting angles but also serves as a perfect helper for macro shooting. Flexible change from Tripod to Monopod, which also fits as an alpenstock.
• 【Remarkable Folding Design】This remarkable folding design of the portable tripod for DSLR is only 13.78in long while the width is just 3.15 in. Both fast and stable spiral locking leg system and tube segment adjustment system makes it convenient to fold the Tripod.
• 【Human-friendly】Installing anti-slip quick loading plate as well as anti-slip and warm sponge handheld grip on the monopod tripod, we value user experience in the first place. During bad weather like heavy wind, adding some heavy objects to the hook enables the stability of the moman tripod.
• 【Panoramic Ball Head】With this 360° Rotating Aluminum Alloy Panoramic Base, you are able to set your DSLR camera at different angles easily and get the best shooting view.

Product features

UNIQUE 2-IN-1 CAMERA MONOPOD UNIPOD TRIPOD

It's essential to own a tripod, so you can be sure that you don't end up with blurry images from a shaky hand. Plus, some of the best images that have been captured by photographers are ones that are shot with the support and stability of a tripod.

• Monan AZ-310 tripod monopod is an outstanding choice for professional and budding professional photographers looking for an option that has all the bells and whistles.

Max Payload of 33 lbs

The Moman Monopod Tripod uses the new Aluminum alloy to ensure lightness and stability of foot tube and avoid coke or hand shaking, which is the most intimate companion for you and your camera.

Remarkable Folding Design

Weighting only 3.44 lbs, converts into a 61.4 inches tripod and monopod that can then adjust and fold back to a more travel-friendly size of 13.8 inches. Both fast and stable spiral locking leg system and tube segment adjustment system makes it convenient to fold the Tripod.

Unique Axis Inversion Desig

Enjoying a unique axis inversion design, the Moman monopod tripod not only provides various shooting angles but also serves as a perfect helper for macro shooting. Flexible change from Tripod to Monopod, which also fits as an alpenstock.

Panoramic Ball Head

With this 360° Rotating Aluminum Alloy Panoramic Base, you are able to set your DSLR camera at different angles easily and get the best shooting view.

Safer Universal Use

Designed Anti-Slip Pads, Single Handle Unipod mounts your camera quick and firmly. Safe screws installed in all sides of the base, Tripod Pan Head prevents camera accident dropping.

Human-friendly

Installing anti-slip quick loading plate as well as anti-slip and warm sponge handheld grip on the monopod tripod, we value user experience in the first place. During bad weather like heavy wind, adding some heavy objects to the hook enables the stability of the moman tripod.

Specification:

• Product weight: 3.44 lb
• Working height: 13.8 in to 61.4 in
• Folding height: 13.8 in (width 3.1 in)
• Product material: Aluminum alloy
• Pipe size: 1 in maximum / 0.5 in minimum
• Weight capacity: 33.07 lb
• Adaptable: All kinds of SLR camera, mirrorless cameras.
• Head Type: 360° Swivel Fluid Head
• Column Quantity: 5 sections
• Tube Diameter: 0.98 in Max/ 0.51 in Min

Product description

PRO-GRADE TRIPOD KIT. The GorillaPod 5K Kit pairs the precision engineered BallHead 5K with a premium GorillaPod 5K for a pro-grade tripod solution. Whether you’re taking photos, making movies or vlogging, this kit will support pro gear up to 5kg (11lbs).



GRIP IT. WRAP IT. STAND IT. Rubberized rings and foot grips provide enhanced stability in difficult terrain. Wrappable legs allow you to secure professional camera equipment to virtually any surface.

• Flexible: Grip it, wrap it, stand it, wrappable legs allow you to secure professional camera equipment to virtually any surface
• Efficient: Arca-Swiss system compatible quick release plate stays connected to camera for instant set-up
• Accurate: Numbered scale on base lets you accurately repeat 360 Degree pans, secondary knob locks pan separately
• Modular: Works with JOBY pro-level accessories, including grip tight pro mounts, GorillaPod arms and hub adapter that allow for mounting GoPro adapters, flash clips, lighting and microphones
• Stable and Durable: The Anodized construction delivers confident positioning in challenging terrain

User questions & answers

Question:	maybe I missed it, but are the 5k leg balls and joints made of metal or plastic? I read that they are metal on a review site of flexible stands
Answer:	5he leg only is a 3/8 thread..you'll need a 3/8 to 1/4 adapter or the joby ballhead
Question:	Does this come with the phone attachment
Answer:	With 18-55 yes but if you have heavy lens like 85 your camera will falling off
Question:	What is the difference in the GorillaPod focus and the newer version
Answer:	The red5k one has the new arca swiss release plates. Switch between devices quick without unscrewing. Also the red looks dope.
Question:	Can I use this for a canon t6? Like is it adaptable to any camera
Answer:	I believe the difference is that the kit has a swivel head on top of the legs and the stand just has a screw mount on top of the legs. A swivel mount is really useful for a traditional tripod but not as important for a gorilla pod. The swivel makes it easier to make small adjustments to angle/position but also is more likely to slip if you load it up with a heavier camera and lens.

Product features

Grip It.

GorillaPod creates the perfect hand grip for vlogging.

Wrap It.

GorillaPod grasps branches, bars & more for unlimited angles and precise composition.

Stand It.

GorillaPod delivers a level and stable shot on any surface.

Versatile

Mount pro-level DSLRs, strobes, flash or video lighting, microphone, Pico projector, speaker or any other ¼-20 device weighing less than 5 kg (11 lbs) or ⅜ mount with included adapter.

Precise

Features a 360° panning bed and 90° tilt and bubble level for optimal position control. Obtain the perfect level and optimal angles for portrait or landscape shots. The numbered scale on the base lets you accurately repeat 360° pans, and the secondary knob locks pan separately.

Take it Anywhere

Capture unique shots from ground level to high up in a rig, with one easy to configure tripod that fits in almost any bag or backpack.