14 best flash triggers

Product description

PLEASE NOTE: Camera, flash, soft umbrella, hot shoe base mount, AA batteries for receiver are not included.

Description:

CT-16 Wireless Transmitter and Receiver Kit:

Includes Transmitter; Receiver; Sync Cable; Convert Adapter

This set is designed for photographic studio and on-location work to trigger various flash lights. The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash.

It is compatible with most cameras such as Canon Nikon Pentax Olympus DSLR Cameras.

It has 16 channels and the transmit frequency of 433MHz can secure fast response and stable transmission.

The receiver has an on/off switch, and an LED to indicate triggering.

Energy-saving design with 12V 23A battery for transmitter and two AA batteries (not included) for receiver.

With an umbrella input holder, the trigger can connect with soft umbrella (flash and soft umbrella not included).

Specifications:

Channel: 16

Transmit Frequency: 433MHz wireless remote system

Transmitter Power: 12V 23A lithium battery

Receiver Power: 2 x 1.5V AA Battery (Not Included)

Synchronous speed: Max. 1/250sec

Outdoor Operation Distance: Up to 30 meters (Open fields, no fraise)

Indoor Operation Distance: Up to 20 meters

Dimension of Transmitter: 2.3 x 1.65 x 1.18 inches / 6 x 4.2 x 3 centimeters

Dimension of Receiver: 3.54 x 1.96 x 1.25 inches / 9 x 5 x 3.2 centimeters

Package Contents:

1 x CT-16 Wireless Transmitter

2 x CT-16 Wireless Receiver

2 x Sync Cable

2 x Convert Adapter

1 x Instruction manual

• KIT INCLUDES: CT-16 Wireless Transmitter, CT-16 Wireless Receiver, Sync Cable, Convert Adapter, Instruction manual
• FLASH TRIGGER TRANSMITTER: 433MHz transmit frequency secures fast response and stable transmission
• CT-16 WIRELESS RECEIVER: 16 channels, transmitting distance up to 98 feet/30 meters, no limits with directions or angles
• FIT FOR MOST FLASHES: Work with the receiver, the transmitter can trigger most sorts of camera studio flashes; The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash
• PLEASE NOTE: Camera, flash, soft umbrella, hot shoe base mount, AA batteries for receiver are not included

User questions & answers

Question:	Can I change the transmitter batterys? If so what type of batterys do they take
Answer:	Very uncomfortable. But it does. The problem is the nose get a little pinch so, have to breath trough the mouth.
Question:	this work with canon 7D + moonlight + speed light
Answer:	Just rub in a drop off dish soap with a clean cloth until dry.
Question:	Will these work with the old vivitar 283 flash
Answer:	My son wore his..they were tight but Fit and the biggest issue was the constant steaming up.
Question:	Can i change the batteries with the transmitters easily
Answer:	Can you please tell me about this can it be worn with glasses

Product description

Specification:

Operate frequency: 433MHZ

Sync speed: 1/250s

Work range: ≤30M

Screw mount on receiver: 1/4"

Battery for tramsmitter: 23A-12V mini batter (the battery included)

Batery for receiver: 2x1.5V AAA battery (the batteries not included)

Suitable:

Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;

Nikon SpeedLight SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;

Olympus FL-50, FL36;

Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;

Sigma EF-500 DG Super, EF-500 DG ST, EF-430;

Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;

Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);

Other flash models with a trigger voltage of 12V or lower;

Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except Minolta SONY as they use a special hot shoe).

Package Contents:

1x Transmitter (with built-in battery)

2x Receiver (AAA Batteries not included)

1x PC Sync cord for camera (2.5mm to Male)

• This flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless wireless remote signal controlling
• The transmitter is consisting of advanced designed circuit and component,and works through sending encoded signal. It comes with 2.5mm sync port,which permits the camera without hot shoe using this flash trigger
• This flash trigger can work with all camera with stand hot shoe mount and those cameras with 2.5mm mm port.(but not work with Sony flashes)
• Very low voltage working make sure that high level of safety and no damage to camera
• It is very useful when you want to trigger 2 flashes at one time

User questions & answers

Question:	Can i replace the built in battery in the transmitter
Answer:	Yes
Question:	does it work with Neewer 300W Strobe/Flash Lights
Answer:	Yes it does highlight level also
Question:	I got the Neewer TT560 Flash for Canon and this trigger. The max sync speed only 1/160s. My camera is canon 6D. Why sync speed can not reach 1/200s
Answer:	yes
Question:	My camera is Canon 60 D which does not have PC output, can I still use this unit? how does the camera communicate with the transmitter to trigger
Answer:	You have to set each pin

Product features

Neewer 16 Channel Wireless Remote FM Flash Speedlite Radio Trigger with 2.5mm PC Receiver

• Neewer flash trigger device is designed to control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless remote signal controlling.

Specification:

• Operate frequency: 433MHZ
• Sync speed: 1/250s
• Work range: ≤30M
• Screw mount on receiver: 1/4"

Package Contents:

• 1x Transmitter (with built-in battery); 2x Receiver (AAA Batteries not included); 1x PC Sync cord for camera (2.5mm to Male)

Compatibility

• Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;
• Nikon SpeedLight SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
• Olympus FL-50, FL36;
• Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
• Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
• Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
• Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
• Other flash models with a trigger voltage of 12V or lower

Product description

Features:

This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously.

Easy installation, low power consumption

No any damage to camera.

High-speed and synchronous for 1/200 second.

Max. working distance: 30M (open area, without interference).

16 channels to avoid interference.

The receiver has an on/off switch, and an LED to indicate triggering.

New design: Channel Selector outside the transmitter and the receiver.

Specifications:

Wireless Flash Trigger.

16 channels selectable.

Power Input of Transmitter: 23A 12V battery (included).

Power Input of Receiver: 2 AAA batteries.

Long lifetime of trigger battery, one year or over 20,000 continuously triggers.

Plug size of receiver: 3.5mm.

Adapter size for receiver plug: 3.5mm --> 6.35mm.

PC sync cable included.

Radio working frequency: 433MHz.

How to use:

Make sure the channel selector of both transmitter and receiver at same position.

Insert the receiver's trigger output plug into your flash's jack.

Press the test button on your transmitter. The studio light should now flash.

Insert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket).

You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hotshoe or hotshoe is engaged).

Package Contents:

1x Trigger.

1x Receiver.

• This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
• Easy installation, low power consumption
• No any damage to camera
• High-speed and synchronous for 1/200 second
• Max. working distance: 30M (open area, without interference)

User questions & answers

Question:	Does it work with nikon d
Answer:	It stays in place
Question:	does this work with the Q3 neewer flash
Answer:	It is a good design you can wear it with a helmet and face and ear feel warm enough.
Question:	Can this work on my canon rebel T
Answer:	No, sizes are all same.
Question:	Hi, will this work with a canon 430ex ii speedlite? i'm not sure if there's a port to connect the receiver to
Answer:	The fastener can adjust the size to the biggest about 24.5”

• 🌿 |Built-in Bluetooth for APP Control|: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera
• 🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, ect.
• 🌿|New User Interface, Easy to Operate|: LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB
• 🌿 |Effectively Avoid Signal Interference|: With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same
• 🌿 |3.5mm Sync & USB Type-C Port|: It can work as a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 3.5mm Sync Cord Jack

User questions & answers

Question:	Hello, i just order this one for my canon t6i, can i be calm about this x2 ttl is going to work with my canon t6i ? thank you
Answer:	As far as I know it should work. I do not own a Canon T6i so I cannot say for sure. Best to test right away so you can return if you have any issues.
Question:	Hi, can i pairing two (2) godox sk400ii flashes
Answer:	hi. Yes you can. I have already paired 3 godox Flashes. 2 x AD200, 1 x AD600
Question:	Can this be paired with the Gordox AD
Answer:	yes
Question:	solo es compatible para canon
Answer:	Si vas a trabajar en forma TTL solo sirve para canon, pero en forma manual con vía alquiler cámara

Product features

Compatibility for Smarphones, Cameras and Flashes

1. Compatible Smartphone Models (This Table Only Lists the Tested Smartphone Models, NOT All Smartphones. For the compatibility of other Smartphone models, a self-test is recommended.)

• iPhone 6S, iPhone 6S Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus iPhone 8, iPhone 6 Plus, iPhone 6, iPhone X; Samsung galaxy S8, Samsung galaxy Note8, Samsung galaxy S9
• HUAWEI P9, HUAWEI P10, HUAWEI P10 Plus, HUAWEI Mate 9 Pro, HUAWEI Mate 9, HUAWEI Mate 10 Pro, HUAWEI Mate 10, HUAWEI P20, HUAWEI P20 Pro

2. Compatible Camera Models (This table only lists the tested camera models, not all Canon EOS series cameras. For the compatibility of other camera models, a self-test is recommended.)

• Please Note1: The cameras which are released before 2012 do not have TTL mode in their D and E group.
• Please Note2: 1500D(2000D/T7), 3000D(4000D): When the high-speed shutter is higher than 1000, there will be lunimance edge on the photo.
• 1Dx Mark II, 1Dx, 5Ds/5Dsr 5DⅣ, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 6D MarkII, 77D, 800D
• 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, 450D, 400D Digital 350D, DIGITAL 100D, 1200D, 1000D, 1100D, M5, M3, EOS R, M50, 1500D(2000D/T7), 3000D(4000D)

3. Compatible Flash Models (Please Note: Supported Functions should be both owned by X2T-C and flashes.)

• No Extra Receiver Needed: AD600 series/AD400 series/AD360II series AD200 series/V860II series/V850II, V350C/TT685 series/TT600/TT350C QuickerII series/QTII/SK II series, DP II series/GSII
• X1R-C as Receiver: 600EX-RT/580EXII/580EX/430EXII V860C
• XTR-16 as Receiver: AD360/AR400(The flashes with Godox wireless USB port), Quicker series/SK series/DP series/GT/GS series/Smart flash series(Can only be triggered)
• XTR-16S as Receiver: V860C V850

Specifications

TTL autoflash: E-TTL II

Manual flash: Yes

Stroboscopic flash: Yes

Wireless Flash

Transmission range (approx.): Up to 328ft / 100m

Built-in wireless: Godox X 2.4GHz

Modulation mode: MSK

Channels: 32

Wireless ID: 01-99

Groups: 5 TTL and Manual

Built-in Bluetooth for APP Control

You can connect the X2 to your phone or tablet via Bluetooth after download the "GodoxPhoto" APP, then control the flash mode, power output, the modeling light mode, the beep of Godox flashes, and etc. It is extremely useful when doing product photography in the studio while the radio trigger is hard to reach on the top of the camera.

Fully Support TTL Autoflash and Pro Functions

Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, control of the modeling lamp, adjusting all groups' output value simultaneously, ect.

Smart TTL-Convert-Manual Function

X2T can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode.

Effectively Avoid Signal Interference

With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same

1/256 Minimum Power Output

The minimum power output can be precisely set to 1/256 in 1/10 step adjustment.

One-Shot and Multi-Shot Setting

Type-C Connection

The MicroUSB has been upgraded to a Type-C. Type-C sockets are just much more solid than microUSB, as are the cables. They’re less prone to being damaged or bent. And you can now upgrade the firmware ether in Windows or Mac system.

New user interface, Dedicated Group Buttons

Starting on the top, we can see that there are five new buttons, labelled A through E denoting the five groups of flashes you are able to control. These will offer quick and easy access to adjust the settings for a specific group at the push of a button.

Relocated Control-Wheel

The dial is positioned in the bottom of the left-hand corner so as not to obstruct the LCD panel of the camera, which should allow easier spinning.

Quick Lock Hot-Shoe

Godox X2T has the new hotshoe locking mechanism as like as the Godox V1, which automatically locks, and a button to quickly unlock and twist it open to remove it.

New AF Assist Light

The X2 has a new AF assist light that uses visible light instead of a red/infrared pattern. So, a certain brand of camera should find it a little easier to use autofocus in the dark now.

Product description

Specifications:

Type: On-Camera Speedlite Transmitter

Exposure Control Syestem: E-TTL II/E-TTL Autoflash, Manual Flash, Stoboscopic Flash, Gr Flash

Frequency: 2405-2475MHZ

Modulation System: Primary Modulation: OQPSK, Secondary Modulation: DS-SS

Channel: Auto, Ch. 1-15

Wireless Radio ID: 0000-9999

Slave Unit Control: Up to 5 Groups(A/B/C/D/E), Up to 15 Units

Transmission Distance: Approx. 100m

Flash Ratio Control: 1:8-1:1-8:1, 1/2-Stop Increments Flash Exposure

FEB: ±3 Stops in 1/3-Increments(When used with flash exposure compensation)

Manual Flash: 1/1-1/128 Power(1/3-stop increments)

Stroboscopic Flash: Provided(1-500Hz)

Flash Exposure Confirmation: Flash Exposure Confirmation Lamp Lights

Model Flash: Fired with Camera' Depth-of-field preview button.

Linked Shooting: Provided

Custom Functions: 9

AF Assist Beam Emitter: Provided

Firmware Update: Provided

Power Source: 2 AA/LR6 Alkaline Batteries Ni-MH Batteries(Not Included)

Wireless Flash Shooting: Approx. Time: 10 Continuous Hours

Power Saving: Power off After 5 min, of idle Operation

Package Size: 11 * 9 * 7.5cm / 4.3 * 3.5 * 3.0in

Package Weight: 240g / 8.5oz



Packing List:

1 * Speedlite Transmitter

2 * Shutter Cable(LS-Micro/C1 & LS-Micro/C3)

1 * Storage Bag

1 * User Manual(English & Chinese)

• The YONGNUO speedlite transmitter YN-E3-RT II is a transmitter for wireless flash shooting. It can control up to 5 groups(15 units) of speedlites that have a wireless multiple flash shooting function using ratio transmission.
• Flash Modes: ETTL/M/Multi/GR4/ flash modes. supports 1st curtain, 2nd curtain(Only in M mode), high speed sync.
• New designed select dial and display interface for easier operation, supports remote control to set the focal length(ZOOM) of the slave flash.
• Firmware can be updated via USB(Micro USB), Built-in AF asist beam emitter, transmission range is 100m.
• Two-way 2.4G radio communication, fully compatible for ST-E3-RT/600EX-RT/YN-E3-RT/YN968EX-RT/YN600EX-RT(II)/YN686EX-RT/YNE3-RX.

User questions & answers

Question:	Hello, would this work on a canon 6d camera and canon speedlite 600ex ii-rt
Answer:	Yes, triple A batteries
Question:	Is this for canon cameras
Answer:	It works with the 7D and speed light as a standard flash. Does not support ETTL. Don’t know about moonlight.
Question:	Will this provide full off camera ttl with my yn565ex speedlight? (on canon 6dmkii
Answer:	I cant answer specifically, but I believe they will work with any hot shoe.
Question:	Does anyone use this with the canon 5d mark iv and have any issues with compatibility
Answer:	Yes all the batteries are very easy to change in the transmitter and the receivers

• Kit Includes: Wireless Flash Trigger Kit for Canon (1 Transmitter, 2 Receivers).
• Multi-purpose trigger set allows you to wirelessly trigger your camera or flash.
• Operating Distance: up to 30 meters (100ft)
• Compatible with all Canon cameras with a standard hot-shoe (Not compatible with Canon T7 and Canon SL3 cameras)
• Backed with Digital Goja 90-Day 100% Satisfaction Guarantee.

User questions & answers

Question:	Does this also work on the Canon T1i? I don’t see it listed in the description
Answer:	It does not have a microphone jack.
Question:	Please is it Radio Frequency or Infra Red? Does it work for any brand of TTL flash technology? tks
Answer:	SDHC cards can be purchased here on amazon. The slot is located where the battery is located on the device.
Question:	I have a 7D would this work for my camera
Answer:	No, they haven't made any kind yet. However, some external components ( hd cable ) or digital unît transformers could be found on retails to hook it up for selfies.
Question:	Altura photo wireless flash trigger with remote shutter for canon claims to work for rebel t5, does it really work? anyone with a t
Answer:	I have no problem with lens, it zooms well. I have made many videos with the Canon FS300 and it really works well.

Product description

PLEASE NOTE: Camera, flash, soft umbrella, hot shoe base mount, AA batteries for receiver are not included.



Description:



CT-16 Wireless Transmitter and Reveiver Kit:



Includes Transmitter; Receiver; Sync Cable; Convert Adapter



This set is designed for photographic studio and on-location work to trigger various flash lights. The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash.



It is compatible with most cameras such as Canon Nikon Pentax Olympus DSLR Cameras.



It has 16 channels and the transmit frequency of 433MHz can secure fast response and stable transmission.



The receiver has an on/off switch, and an LED to indicate triggering.



Energy-saving design with 12V 23A battery for transmitter and two AA batteries (not included) for receiver.



With an umbrella input holder, the trigger can connect with soft umbrella (flash and soft umbrella not included).



Specifications:



Channel: 16



Transmit Frequency: 433MHz wireless remote system



Transmitter Power: 12V 23A lithium battery



Receiver Power: 2 x 1.5V AA Battery (Not Included)



Synchronous speed: Max. 1/250sec



Outdoor Operation Distance: Up to 30 meters (Open fields, no fraise)



Indoor Operation Distance: Up to 20 meters



Dimension of Transmitter: 2.3 x 1.65 x 1.18 inches / 6 x 4.2 x 3 centimeters



Dimension of Receiver: 3.54 x 1.96 x 1.25 inches / 9 x 5 x 3.2 centimeters



Package Contents:



1 x CT-16 Wireless Transmitter



4 x CT-16 Wireless Receiver



4 x Sync Cable



4 x Convert Adapter



1 x Instruction manual

• KIT INCLUDES: CT-16 Wireless Transmitter, CT-16 Wireless Receiver, Sync Cable, Convert Adapter, Instruction manual
• FLASH TRIGGER TRANSMITTER: 433MHz transmit frequency secures fast response and stable transmission
• CT-16 WIRELESS RECEIVER: 16 channels, transmitting distance up to 98 feet/30 meters, no limits with directions or angles
• FIT FOR MOST FLASHES: Work with the receiver, the transmitter can trigger most sorts of camera studio flashes; The transmitter is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash
• PLEASE NOTE: Camera, flash, soft umbrella, hot shoe base mount, AA batteries for receiver are not included

User questions & answers

Question:	Does this support HSS
Answer:	Yep. This is one of those, 'you got one job' devices, that should universally work with virtually every camera system there is.
Question:	Works with Canon 5dmkiv
Answer:	Unfortunately this Wireless Flash Trigger is unreliable. I purchased one, it failed completely after working intermittently for a few photo shoots. Frustrating experience. The seller sent a second one, which did not work at all. Consider investing in a higher grade name brand trigger. In my opinion there is nothing worse than a flash failing at a critical moment resulting in a missed photo that cannot be recreated.
Question:	Can the transmitter work as a shutter release button while Simultaneously fire off multiple flashes on the receivers
Answer:	Yes, works with standard hot shoe
Question:	Is the battery on the transceiver replaceable
Answer:	Tranmitter sits on the camera’s hot shoe. See if this one fit for your speedlight: https://www.amazon.com/Neewer-Wireless-Speedlite-Receiver-Universal/dp/B00A47U22U

• 🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
• 🌿 |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode
• 🌿 |Versatile Using Methods|: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack
• 🌿 |01-99 WIRELESS ID|: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively
• 🌿 |LARGE LCD Display|: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously

User questions & answers

Question:	I have several different brands of flash. i have switched to canon mirrorless system and i’m wondering how i can connect 3 external flash
Answer:	yes. it works on my 5div 6d & 7dii with the canon 600ex rt and the yongnuo yn600ex rt
Question:	Will this work for godox v1-c for canon
Answer:	Yes
Question:	Para la nueva canon rp funciona para hacer disparos en altas velocidades
Answer:	Not sure what you mean. You may mount your speed light remotely. I'm using a Cannon M50. It is NOT a ttl camera.
Question:	How can I remote trigger a camera using this remote to control the flashes
Answer:	I used it with the 5DIV without difficulty. I also used it with an EOS R.

Product features

Built-in Godox 2.4G Wireless X System

XPro-C TTL Wireless Flash Trigger can control the flashes with built-in Godox wireless X system e.g. camera flashes, outdoor flashes and studio flashes.

TTL/Manual/Multi Flash

Support TTL Autoflash, Multi Flash, Manual Flash, 16 Groups and 32 Channels to Wirelessly Control and Trigger.

Versatile Using Methods

As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless PENTAX Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack.

TTL-Convert-Manual Function

Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode.

Large Dot Matrix LCD

Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously. 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation. 11 Customizable Functions.

Magnification Function Displays Details of Each Group Settings

Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode.

One-Shoot & Multi- Shoot Setting

One-Shoot & Multi- Shoot Setting

1-99 WIRELESS ID

01-99 WIRELESS ID, Avoid Signal Interference effectively.

USB Firmware Upgrade

Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack.

Metal Hotshoe

Metal Hotshoe for long working life.

Focus Assit Beam

Focus Assit Beam

Enter Sleep Mode Automatically if 3 minutes without operation

Enter Sleep Mode Automatically if 3 minutes without operation. Power supply: 2*AA batteries (NOT Included).

Compatible Flash and Camera Models:

Note:

For AD600 series/AD360II series/AD200 V860II series/V850II/TT685 series QTII/SK II series/DP II series/GSII,you just need to purchase this Xpro-c trigger.

For 600EX-RT/580EXII/580EX/430SXII V860C ,You need to purchase an extra X1R-16 receicer.

For AD360/AR400 quicker series/SK series/DP series /GT/GS series/Smart flash series(only for triggering),You need to purchase an extra XTR-16 receicer.

For V860C/V850 ,You need to purchase an extra XTR-16S receicer.

As there are so many camera flashed in the market ,which are compatible with Canon speedites,we do not test one by one,if you have any confusions,just feel free to E-mail to us,and we can make comfirm for you .

Package contents

1X Xpro-c trigger for Cannon

1X Detailed instructions

1X Pegear Cleanning kit

• 🥝[Application]: Apply for Canon EOS hotshoe camera flash, outdoor flash, studio flash TT350C V350C TT685C V860II-C V850 AD200 AD400Pro AD600 Pro AD600 and so on.
• 🥝[TTL Autoflash and Pro Functions]: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
• 🥝[LARGE LCD Display]: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously.
• 🥝[Versatile Using Methods]: As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack
• 🥝[01-99 WIRELESS ID]: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively

Product features

Built-in Godox 2.4G Wireless X System

XPro-C TTL Wireless Flash Trigger can control the flashes with built-in Godox wireless X system e.g. camera flashes, outdoor flashes, and studio flashes.

TTL/Manual/Multi Flash

Support TTL Autoflash, Multi Flash, Manual Flash, 16 Groups, and 32 Channels to Wirelessly Control and Trigger.

Versatile Using Methods

As a wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless PENTAX Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack.

TTL-Convert-Manual Function

Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode.

Large Dot Matrix LCD

Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously. 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation. 11 Customizable Functions.

USB Firmware Upgrade

Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack.

Metal Hotshoe

Metal Hotshoe for long working life.

• ➤PERFECT COMBINATION - Godox Xpro-N TTL Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combined with Godox X1R-N Receiver, it can also control the original Nikon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution.
• ➤TTL AUTOFLASH - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnet Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
• ➤MULTI-FUNCTIONAL - Can be used as a Wireless Godox Flash Trigger / Wireless Nikon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions
• ➤X1R-N RECEIVER - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver for Nikon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash.
• ➤LCD DISPLAY - Both the Xpro-N & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient.

User questions & answers

Question:	Hello can i use this with a d3300 + sb
Answer:	No
Question:	Could i use this transmitter and controllers on my canon 430ex ii w/ my sony (a6000), trying to find ways to use it as an off-camera flash
Answer:	I used it with the 5D mark 2, so it should work with the mark 4.
Question:	Can I use one receiver off of the shoe to control the shutter, another unit on shoe for flash while I hold trigger
Answer:	Probably if the camera has a 1/8 (8mm) connection for a remote shutter release. I have never tried it.
Question:	Can the receivers control non godox studio strobes like neewer, flashpoint, promaster, etc
Answer:	It's one transmitter and multiple receivers. All batteries are exchangeable. At the transmitter it's hidden under a sticker. you need a very tiny screwdriver to open it. But yes, i could open it.

• Kit includes: Wireless Flash Trigger Kit (1 Transmitter, 2 Receivers).
• Compatible with all Nikon cameras with a standard hot-shoe. (Wired trigger not Compatible with Nikon D3400 and D850
• Operating Distance: up to 30 meters (100ft)
• Multi-purpose trigger set allows you to wirelessly trigger your camera or flash.
• Backed with Digital Goja 90-Day 100% Satisfaction Guarantee.

User questions & answers

Question:	How do you sync this to your strobes
Answer:	Sorry I’m not familiar with the mirrorless. Check the Canon website.
Question:	It works with flash neewer
Answer:	Yup, it sure will.
Question:	Will this work on the sony a
Answer:	si. trabajara muy bien sincronizada.
Question:	hey..... do these work with d300s? can it trigger the shutter for d300s
Answer:	It's a while ago, but I think I have the same question. I want to trigger my camera remotely, and have a remote flash. I put a receiver on camera and flash, have the transmitter in hand. If I fire, the camera shutter triggers AND the flash fires immediately, NOT controlled by the camera. So I guess you need one transmitter in your hand and a receiver on the camera on one channel, a SECOND transmitter on the camera and a receiver at the flash (if it doesn't have a built in) on another channel. That way the flash is controlled/triggered by the camera, while I trigger the camera remotely. To do otherwise, you would need a transceiver with 2 circuits on the camera. There was an answer to that at dpreview website as well

• Advanced model of YN560-TX [Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-TX].
• Can control up to 6 groups meaning that it can control up to 6 flash units.
• Support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968N / YN860Li speedlite.
• Compatible with & Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605.
• CE/FCC/Telec certification, and Can work with any model of camera as long as it has standard hot shoe.

User questions & answers

Question:	Does it works with the sony a
Answer:	I don’t know the answer sorry but if you join Godox user group on Facebook and ask the question you will get the right answer
Question:	What's the difference between this and the mark I
Answer:	Dear friend, Sony flash/Godox flash(with Godox 2.4 X system) + Sony Camera + this kit(Sony version)can realize off-camera flash, and same principle applied to Canon! Thanks
Question:	Hello, it work in canon eos 5d mark iv
Answer:	Yes !
Question:	Will it work with the yn568 exii
Answer:	Yes, they can. You will just have to use the proper sync cable for it.

Product features

YONGNUO YN560-TX II LCD Flash Trigger Remote Controller for Canon and YN560IV/III YN660 with Wake-up Function for Canon Cameras

YN560-TX II C, Manual Flash Controller, can trigger YN-560 IV YN660 YN560 III and remote control each group of flash mode (flash output) and the focal length settings by the controller, no need to operate on the flash, the flash display screen will synchronously display the parameters for the corrresponding grouping.

Specification:

• Advanced model of YN560-TX [Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-TX]
• Can control up to 6 groups meaning that it can control up to 6 flash units.
• Support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968N II / YN860Li speedlite
• Compatible with & Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605
• CE/FCC/Telec certification
• Can work with any model of camera as long as it has standard hot shoe.

Features:

• 1, Wireless Triggering Function a, If you use it with like YN-560 IV/YN560III / YN660 / YN968N / YN860Li Speedlite, you need to activate the group function of them with YN560-TX II before you use them together, ( more detailed, you can see our manual. ) b, If you use it with other Yongnuo flash, you need a transceiver of Yongnuo RF-602, RF-603, RF-603 III, RF-605.

• 2, Wireless Shutter Receiver Function You can mount YN560-TX II into Camera, use shutter release cable ( LS-2.5mm Series ) to connect it with your camera, and set RF-602, RF-603, RF-603 II or RF605 in " transceiver " state, and then you can shutter release your camera and you can also mount one flash into the hot shoe of flash transceiver, it also can be triggered synchronously.

Product description

Note: PT-16/PT-16NE can not work with any other flash trigger.

Suitable for:

Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX

Nikon SpeedLight SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24

Yongnuo YN-460II YN-468 YN-560 YN-462 YN-465 YN-467

Olympus FL-50, FL36

Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT

Sigma EF-500 DG Super, EF-500 DG ST, EF-430

Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D

Vivitar 285HV (Older Vivitar 285/283 works only with PC sync)

Other flash models with a trigger voltage of 12V or lower

Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except SONY as they use a special hot shoe)

Battery for transmitter: 23A-12V mini battery

Battery for receiver: AAA alkaline battery

Largest work distance: ≤30m

Work frenquency: 433MHz

Package Contents:

1x 16 Channels Transmitter

1x Receiver

1x PC Sync cord for camera

• The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.
• The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times.
• Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/25 sec.
• The trigger current is only .1MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.
• Note: PT-16/PT-16NE use the whole new system,So it can not work with any other flash trigger.

User questions & answers

Question:	is the 12v battery in the transmitter user replaceable
Answer:	Assuming flash units that normally fit on top of the camera, you simply install them on the receivers. the transmitter sends a signal from the camera when positioned in the flash hot shoe.
Question:	Will this work with a d
Answer:	I only tested it with the Sb800 and SB910 and found that it works with the SB800 but NOT with the SB910.
Question:	Anyone else have issues with the receiver not functioning with rechargeable AAA's
Answer:	I suggest you order for your model camera I have a d7000 nikon I ordered the flash for my camera and the trigger pack is included paid $99.00 for the package and it is perfect and simple to use
Question:	Will this for tt
Answer:	Hey Adam. Did you get this to work on your D300s? I need one for mine and want to find a good remote. I don't need the flash part, I just need it to trigger my camera shutter. Did that work for you? Thanks!

Product description

Description:

AODELAN FT-8 Wireless Flash Trigger is a simple and reliable radio flash trigger .It offers a simple way to use off-camea flash .The rotating Transmitter can be used upright or in the low-profile down position.The 8-channel transmitter and receiver units have a maxium range of 200m and feature a "fire-all"channel function.



Dimensions:

Transmitter: 1.4 x 2.0 x 4.1" (3.5 x 5.0 x 10.4 cm),

Receiver: 1.5 x 2.0 x 3.5" (4.0 x 5.0 x 8.8 cm)



Connecting a flash to the FT-8 Receiver hot shoe

1.Turn off the flash and the FT-8 receiver.

2.Slide the flash into the receiver's hot shoe mount .

3.Lock the flash with the flash's locking mechanism.

4.Turn on the flash and the FT-8 receiver.

5.Set the flash to Manual mode.



Connecting a flash/strobe to the FT-8 receiver by sync cable

1.turn off the flash/strobe and the FT-8 receiver.

2.Connect a cable to the receiver's 3.5mm Sync Port.

3.Connect the opposite end of the cable to a flash or studio strobe(a 6.3mm adapter is included for studio strodes with larger ports).

4.Set the flash/strobe to Manual mode.

• ↔Compatible with all most hot shoe flashes, include Canon, Nikon, Olympus, Panasonic, Pentax, Fuji, Samsung,Sony(Except Sony Flashes).
• ↔The rotating Transmitter can be used upright or in the low-profile down position.
• ↔2.4GHz frequency, strong anti-interference, communication range up to 200m,8 channels, communication range of 200m, max sync speed of 1/250s.
• ↔Used with the 3.5-3.5 cable to connect the 6.3mm sync port on the receiver to the studio light.(a 6.3mm adapter is included for studio strodes with larger ports).
• ↔Package includes: 1*Receiver, 1*Transmitter, 1*3.5 to 3.5mm sync cable, 1*3.5mm to PC plug cable, 1*1/4" mono plug socket , 1*Carrying pouch, 2*Lanyards.