12 best ring flash for canon slrs
Prepare Your Doorbell Area:
- Make sure the area around your doorbell is clean and dry.
- Turn off power to your existing doorbell.
Remove Old Doorbell:
- If you have an existing doorbell, you may need to remove it.
Mounting the Ring Doorbell:
- Use the provided level tool to ensure the mounting bracket is straight.
- Mark the drill holes using the bracket.
- Drill holes and insert wall anchors.
- Attach the mounting bracket using the provided screws.
Wiring:
- If your Ring Doorbell model requires wiring, connect the wires to the terminals on the mounting bracket.
Attaching the Ring Doorbell:
- Line up the slots on the back of the Ring Doorbell with the tabs on the mounting bracket.
- Slide the doorbell onto the bracket until it clicks into place.
Power On:
- If your Ring Doorbell is battery-powered, insert the battery.
- If it's hardwired, turn the power back on.
Set Up Ring Doorbell:
- Download the Ring app on your smartphone.
- Follow the app instructions to set up your Ring Doorbell.
Adjust Settings:
- Customize your settings, including motion detection and notification preferences.
Install Chime (Optional):
- If you have a Ring Chime, follow the instructions to set it up.
Test Your Doorbell:
- Press the doorbell button to ensure it rings through to your smartphone or chime.
Remember, these are general steps, and it's crucial to follow the specific instructions provided in the manual for your Ring Doorbell model. If you encounter any issues, refer to troubleshooting tips in the manual or contact Ring customer support for assistance.
Below you can find our editor's choice of the best ring flash for canon slrs on the marketA ring flash is a specialized type of camera flash used primarily in macro photography and portrait photography to achieve specific lighting effects. It is designed to provide even and shadow-free illumination by surrounding the camera lens, creating a unique lighting style that is especially useful for close-up shots. Here's what you need to know about ring flashes for Canon SLRs:
Purpose: Ring flashes are often used in situations where you need to eliminate harsh shadows and achieve a uniform, diffused light on your subject. They are commonly employed in macro photography for capturing intricate details of small subjects like insects, flowers, or jewelry. They are also used in portrait photography to create a distinctive "halo" effect in the subject's eyes.
Mounting: Ring flashes are typically mounted directly onto the camera's lens, encircling it. They are commonly referred to as "ring lights" because of their circular design.
Power Source: Ring flashes can be powered by the camera's battery or have their power source, depending on the model. Some connect directly to the camera's hot shoe, while others have a separate power unit.
Light Control: Many ring flashes offer adjustable power settings to control the intensity of the light. This flexibility allows photographers to adapt to different shooting conditions and creative needs.
TTL (Through-The-Lens) Metering: Some ring flashes support TTL metering, which means they communicate with the camera to automatically adjust the flash output based on the scene's lighting conditions. This feature can be handy for quick and accurate exposures.
Model Compatibility: When purchasing a ring flash for your Canon DSLR, ensure that it is compatible with your specific camera model. Canon has a variety of DSLRs, and compatibility can vary.
Price Range: Ring flashes come in various price ranges, from affordable options for hobbyists to more advanced and expensive models for professional photographers. The cost may vary based on features and build quality.
Accessories: Some ring flashes come with additional accessories like diffusers, color gels, and adapter rings to fit different lens diameters. These can enhance your creative options.
Alternatives: In addition to dedicated ring flashes, some photographers use alternative lighting setups, such as off-camera flash with diffusers or reflectors, to achieve similar effects. The choice depends on personal preferences and the desired outcome.
Use Cases: Ring flashes are commonly used in dental photography, scientific imaging, fashion photography, and any situation where achieving even and shadow-free lighting is essential.
Remember that the effectiveness of a ring flash depends on the specific photographic situation and your creative goals.When choosing a ring flash for your Canon DSLR, consider your shooting style, subject matter, and budget to make the best selection for your needs.
Below you can find our editor's choice of the best ring flash for canon slrs on the market- Tips To Use: Press & Hold the On/Off button 3-5 seconds to turn on/off, Specially Made for Close-Up & Macro Shots; Suitable for Any DSLRs with a STANDARD hotshoe socket | Camera NOT Included
- Consist of 48 pieces LED, higher luminance and lower static power consumption
- Eight diameters of adapter rings for alternative use 40.5mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm
- Three colors of flash diffusers for alternative use orange,blue and transparent
- High-quality LED light close to natural light, eight levels of luminance status to meet higher photograph needs
User questions & answers
Question: | Does it work for canon powershot 410is |
Answer: | Seguramente trabaje con la Canon EOS T7i , porque trae anillos adaptadores de las medidas de filtro más comunes, y entonces no depende de la marca de la camara, sino del diametro de filtro que tenga el objetivo. |
Question: | Does this fit a Cannon eos rebel T1i |
Answer: | It works with Nikon D90, this LED ring flash fits all Lenses with filter size at 49, 52, 55, 58, 62, 67, 72, 77mm |
Question: | i bought this ring flash for my canon 7d. it will not syncronize, all pictures come out black. what can i do |
Answer: | depends on the diameter of your lens... |
Question: | Does the stay on? Say I want to use it to film at night |
Answer: | 7 discrete levels. That's tolerable, but OK, but what you don't see on the website is other important specs: Guide Number (GN) 15. This unit slooks to be the same as the Bolt VM-110 sold by B&H. That has some specs listed. |
Product features
Portrait
Plant
Insect
Parts
- Macro Ring Head
- Power Control
- Extension Cable
- Translucent Diffuser(Three color: orange,blue and transparent)
- Ring Flash LED Light
- Lock
- Adapter Ring
- Battery Cover
- Hotshoe Base
- Fixed Knob
- Hotshoe Contact
- Test Button (PILOT)
- Mode Switch Button (MODE)
- LED Light Steady On Button (LIGHT)
- Power Switch (ON/OFF)
- Output Power Adjustment Button (LEFT/Decrease)
- Vacancy Button
- Output Power Adjustment Button (RIGHT/Increase)
- LCD Display Screen
Light Filters
Transparent: Soften light
Orange: Creats warm light
Blue: Filt most red & green light
Settings
Flash GN: 1/64 +0.3
Flash Mode: Manual
L/R: Both
ISO: 100
F-number: F/36
Shutter Speed: 1/125S
Lens Focus: 85mm
Product description
Specifications:
Power by: 4 * AA batteries or external power(Not included)
Color: Black
Item weight: 417g/ 14.7oz
Package size: 19 * 15 * 12.5cm/ 7.5 * 5.9 * 4.9in
Package weight: 758g/ 1.67Lb
Package list:
1 * YN-14EX Macro Ring Flash Light
4 * Adapter Rings ( 52mm, 58mm, 67mm, 72mm )
1 * Protection Bag
1 * Manual
- Supports master TTL flash.Ring type double lamp macro flash.
- Large-sized LCD display.LED AF assist light.
- Equipped with PC sync interface.Support the Lens of multiple filter size.
- Sound prompt system.High speed recycling system
- Provided with external power socket.Automatic settings saving.
Product description
Feature:
The Macro Ring Flash Lite can produce a ring of light that reduces shadow which is suitable for macro shotting.
The flash tube is mounted in front of your lens producing light around the objects.
7 adapter rings are included to fit for different size lenses.
AF assist lamp
TTL mode
More approach natural light use high quality LED light
It is meets the higher photograph needs under the innovation function
Left and right flash function make the object appeared third dimension
Fit for macro shot, scientific research, medical and personal hobbies of photography
Include 7 adapters(52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm) for different size lenses
Various flash functions
Suitable for macro shooting, portrait shooting, jewelry shooting, oral medicine shooting and so on.
Main Functions
TTL/ Lamp A flashing/ Lamp B flashing/ TTL mode/ AB Lamp brightness ratio mode/ Manual mode/ Multi
Macro dedicated flash, support E-TTLII/ E-TTL/TTL
Specifications:
Weight: 398g¨Ring flash only
Size: 191X77X60mm
Power supply: 4 AA alkaline batteries or AA NI-MH batteries
Gudie NO: 14
Flash mode: TTL/Lamp A flash/Lamp B flash /AB Lamp flash ratio mode/ Manual outputrepeating flash/
Flash times: 100-800 times(under AA alkaline battery)
Recycle time: about three seconds(under AA alkaline battery)
Color temperature: 5500K
Flash duration: 1/200-1/20000seconds
Light induction distance: Indoor 15 meters, 10 meters outside
FLASH COMPATIBLE ON CAMERAS
All Canon DSLR Cameras, Such as 5D Mark II/7D/60D/600D/550D/500D/1000D/1100D/5D/50D/40D/450D/600D/650D/ 5D Mark III etc.
Package includes:
Macro Ring flash
protecting bag
pedestal
specification
warranty card
adapter ring
- The Macro Ring Flash Light can produce a ring of light that reduces shadow which is suitable for macro shotting.
- Left and right flash function make the object appeared third dimension
- More approach natural light use high quality LED light
- 7 adapter rings are included to fit for different size lenses.
- Suitable for macro shooting¡portrait shooting¡jewelry shooting¡oral medicine shooting and so on.
User questions & answers
Question: | Assuming this works with all canon e-ttl cameras with a flash hot shoe, such as the g |
Answer: | Yes, this works with canon camereas with standard hot shoe. |
Product description
The Macro Ring Flash is a digital flash unit for macro photography that is compatible with most digital Canon SLR camera models. It is dedicated to the e-TTL I/II flash systems and provides accurate exposures of close-up objects. When shooting at extremely short distances, minor lighting alterations can result in relatively large changes of exposure. the TTL metering of the macro ring flash eliminates the need for grueling exposure calculations.
- Bounce and swivel zoom head allows versatile reflection for difficult lighting conditions
- Guide Number: 46 feet (50mm @ ISO 100)
- For Macro, Medical and Hobby Photography
- Compatible with all Canon EOS models including: 1D/1Ds, 5D, 7D, 50D, 60D, T1i, T2i, T3/3i, XSi, XS, XT/Ti, 300D, 400D, 450D, 1000D
- EV exposure control that synchs with Canon EOS SLR cameras
User questions & answers
Question: | Hello is the Bower SFD14C Canon E-TTL I/II Macro Ring Flash compatible with the new Canon 2D |
Answer: | yesthank you |
Question: | Will it work with Canon 77D |
Answer: | I use the energizer lithium AA. They seem to do a great job. Not sure about external packs. |
Question: | Will the Bower SFD14C work with the Canon EOS T |
Answer: | sorry i am not sure |
Product description
Specifications:
Model: YN14EX II
Main Material: Plastic
Circuit Design: Insulated Gate Bipolar Transistor
Guide No.: 18 (ISO 100 in meters)
Flash Coverage: Up and down about 80°/ left and right about 80°
Flash Ratio Control: With the precision of 1/2 EV within the range of 8:1—1:1—1:8.
Flash Mode: TTL, M
Power: 4 * AA alkaline batteries or AA nickel-metal hydride (Ni-MH) batteries( The batteries are not included.)
Lighting Times: 200-2500 times
Recycle Time: About 3 seconds
Color Temperature: 5600K
Flash Control: 8 levels brightness control (1/128~1/1), 22 levels of fine tuning
External Interface: Hot Shoe, PC Port, Charging Interface
Compatible: Fit for Canon 5DII,5DIII,1DIV,5D,6D,7D,1D Mark IV,650D,600D,550D,500D/T1i,450d/Xsi,400D/Xti,350D,300D,1000D,1100D,1200D,70D,60D,40D,30D,etc.
Control Unit Dimension: 175 * 105 * 160mm
Flash Unit Dimension: 135 * 123 * 26mm
Package Size: 14.8 * 11.7 * 22.8cm / 5.8 * 4.6 * 9.0in
Package Weight: 900g / 31.7oz
Note:
The camera and batteries are not included.
Package List:
1 * Annular Macro Flash
1 * Protective Bag
4 * Adapter Ring
4 * CT Filters
1 * User Manual(English,Chinese)
- ♥M/TTL Flash Supported: Support Exposure Compensation, FEB, Rear-curtain sync, FE Lock, Modeling Light, menu access to Canon camera.
- ♥Macro Ring Type Dual-Lamp Flash: Support M/TTL flash ratio setting, and the flash tube A and B can be adjusted together or individually, it can create shadows on the subject and make the photo with sculpture effect.
- ♥Large-size LCD Display: Equipped with large size LCD display, which can be more clear, more intuitive to see and set flash function, convenient to use.
- ♥LED Focus Assist Light: High brightness LED focusing assistant lamp can easily focus when the environment is dark.
- ♥With PC Sync Interface: YN14EX II is equipped with standard PC synchronous interface, which allows you convenient to use synchronous flash by using PC synchronous line.
Product description
1000LM Underwater Diving Flashlight Torch Lights By SHOOT
Features:
【1000LM,Let You See More Clearly】The brightness is up to 1000LM,Use CREE XM-L LED, good flashlight to choose the lamp bead.Three modes(Hard Light-Low light-Flash), the cycle light.
【60 Meters Depth of Dive】Press key to dynamically test 5000 times without water in 60 meters underwater,let you use more confidence.
【-10 degrees~40 degrees, Working Normally】Using aviation grade aluminum material,in the deep sea, it is safe to prevent corrosion, collision, and breakage.
【6 Hours of Continuous Use(Mode Flash)】Flash mode lasts 6 hours,Low light mode lasts 5 hours,Hard light mode lasts 2 hours.
【Professional Low Power Protection】When the power supply voltage is as low as 5.2V, the product automatically shuts down all functions to protect the battery from over-discharging.
Main Function:
Hard Light,Low light,Flash
Charge Lamp:charging is red light,the light is green when it is full of electricity
When the power supply voltage is as low as 5.2V, the product automatically shuts down all functions to protect the battery from over-discharging
Product Related Parameter Test Standard:
Strong light file 7.4V current:1.1-1.2A
Weak light file 7.4V current:530mA-580mA
Flashing pulse current 7.4V:0.97A-1.3A
Shutdown static current:Less than 5uA
Strong light file discharge time:2 hours
Low light level discharge time:2 hours
Flash file discharge time:2 hours
Charging time:6 hours
Function Parameter:
Brightness:1500LM
Power Supply:2 * battery(include),2000mAh 7.4V
Waterproof Depth:60m
LED Specification:White light,CREE XM-L R3x6pcs
Color Temperature:6500K
LED Life:50000 hours
Material:Aviation grade aluminum
Oxidation:Anodic hard oxidation
Dimension:Φ55x115mm
Weight:350g(With battery)
- 【1000LM,Let You See More Clearly】The brightness is up to 1000LM,Use CREE XM-L LED, good flashlight to choose the lamp bead.Three modes(Hard Light-Low light-Flash), the cycle light
- 【60 Meters Depth of Dive】Press key to dynamically test 5000 times without water in 60 meters underwater,let you use more confidence
- 【-10 degrees~40 degrees, Working Normally】Using aviation grade aluminum material,in the deep sea, it is safe to prevent corrosion, collision, and breakage
- 【6 Hours of Continuous Use(Mode Flash)】Flash mode lasts 6 hours,Low light mode lasts 5 hours,Hard light mode lasts 2 hours
- 【Professional Low Power Protection】When the power supply voltage is as low as 5.2V, the product automatically shuts down all functions to protect the battery from over-discharging
Product description
★Seller Warranty Description
★We offer 1 year warranty for this unit
The first macro twin light equipped with GN58 (feet in ISO100). Rapid Recycle Time, Flexible arms & Light Weight make it perfect for macro photography.
The new Macro Twin Flash KX-800 is specially designed for the use of macro photography. It features a combined guide number of 190 (in feet) with 8 levels of power adjustment. Powers can be adjusted independently in the left and right flash. The high output makes it extremly handy for macro photographers who shoots under small aperture and high magnification ratio. Quick recycle time (1-5 sec) also helps in shooting in a volatile environment. On top of that, the Macro Twin Flash is built with two 48cm long flexible arms. This gives photographers complete flexibility to position the flash for the best performance. A LED focusing light is equipped for focus assistance. The whole system weigh only 1 pound, making it a very portable gear for bringing around.
* Batteries are NOT included.
Features
GN 190 (in feet at ISO 100), GN 58 in meter
Rapid Recycle Time (Appr. 1-5 seconds)
48cm long dual flexible arms
Independent Output Control
LED focus assist light
Light Weight (Weigh 1 pound)
^Compatible with Canon/ Nikon / Sony A /Pentax Camera
^ Hot shoe adaptor is needed for certain Sony cameras. Please ask before purchase.
Specifications
Circuit Design Insulated Gate Bipolar Transistor(IGBT)
Guide No. 58 (in meter), 190 (in feet)
Horizontal Rotation Angle 0~270 degrees
Power Supply 4x AA size batteries Lighting Times 100~1500 times(Alkaline cell used)
Recycling time appr. 1~5s(Alkaline cell used)
Color Temperature 5600k
Sync speed Flash time 1/250s
Flash Conttrol 8 levels of output control(1/128~1/1)
External connection Hot shoe, PC port,External power supply interface
product size:20*9*6CM
- ★ standard hot shoe, suitable for all cameras/Suitable for all macro lenses and super macro lenses. Convenient lighting, multi-angle fill light is the best micro off-line flash, you can eliminate the ugly shadow of a single light, an excellent photographic worker is to know how to use light. This is a complex imaging system due to the need to adjust the light at different angles and light, and our double-headed flash is one of the most important characters.
- ★ Explosion index (ISO100): GN58 first macro dual lights. Each lamp can independently output the size of light, speed return can be continuous shooting. If you need a professional diffuser and camera tripod, please buy it at my store.
- ★ the tripod and soft board in picture , diffuser - all need to buy, not presented. 48 cm length of the flash tube (you can play backlit shooting, you can adjust the distance from different angles to shoot more light and shadow) Product Size: 20 * 9 * 6CM. Special folding fastening materials, lamps and lanterns is very easy to fix. Not easy to sag and deformation
- ★ Note: If you want to return, please keep the product and packaging intact, thank you for your understanding ★Some Sony cameras need hot shoe adapter. Please ask before buying
- ★ LED-assisted spotlight - can also be long bright light, suitable for night shooting, walking at night ★ Note: Do not flip the lamp 360 degrees, because the pipeline is too long, in case of a short circuit. Follow the instructions to install the battery
User questions & answers
Question: | Is this flash or just light |
Answer: | this is macro flash |
Question: | What is the max sync speed for this? i have a canon 5d mark iii with a 100mm macro |
Answer: | Just FYI, the max sync speed depends on the camera, not the flash |
Question: | Can this be used on the Sony A7R2 with sony adp-maa adapter |
Answer: | friend ,Can be used. if you can not use the need for a hot shoe converter. |
Question: | Can you point me to a specific flash adapter that will allow this flash to work with sony e-mount cameras (such as the a7rii and a6500)? many thanks |
Answer: | If you need a Sony adapter, the one you need is here: https://www.venuslens.net/product/macro-twin-flash-kx-800/ |
Question: | does it work with the canon rebel xs |
Answer: | The Canon Speedlite 420EX Flash works very well with my Canon Rebel XT. Check an on-line manual for the Speedlite 420EX. The hard copy I have says it works for Rebel XSN. Is that the same as your camera? The features available with Speedlite 420EX depend on the EOS camera. |
Question: | Does it work Wireless with the Canon 60D |
Answer: | Yes, you can slave it. |
Question: | Is it compatible with the rebel sl |
Answer: | The 420ex is compatible. However, the 420ex has been superceded by the 430ex, if you are buying new. All the Speedlites are compatible, by the way. |
Question: | does it work with a canon t |
Answer: | The t3 is a later model than I have ever owned/used. I retired almost ten years ago. |
Question: | Does this fit a52mm lens |
Answer: | I am using it with the Canon 60mm macro lens and if my memory serves me right it fits this lens just right (the lens has a 52mm diameter). |
Question: | Using new batteries. But the flash doesn't fire.Shows red light on 'ready', nothing on 'ok'. Please help |
Answer: | How do you have your camera set up? I had to go to the menu and set it to external flash. |
Product description
Specification:
YN-14EX can automatically save your current operating settings to convenient your next use.
Specification Macro Ring Flash YN-14EX
Circuit Design Insulated Gate Bipolar Transistor
Type Automatic annular flash for macro shots
Guide No. 14 ( ISO100, 105mm )
Flash Coverage Vertical rotation angle about 80 degree / Horizontal rotation angle about 80 degree
Flash Mode TTL, M
Lighting Times 200-2500times
Color Temperature 5600k
External Interface Shoe, PC port and external charging port
Flash Ratio Control With the precision of 1/2 EV within the range of 8:1 - 1:1 - 1:8
Power Supply 4 AA alkaline battery or AA Nichelmetal hydride battery ( NI-MH )
Recycle time approx 3S
Flash Control 7 levels of output control ( 1/64 - 1/1 ), 19 levels of fine tuning
Flash Unit Dimension 135 * 123 * 26mm
Control Unite Dimension 153 * 74 * 56mm
Net Weight 420g
Package contents:
1 x Yongnuo YN-14EX Macro Ring LITE Flash Light
4 x Adapter rings ( 52mm, 58mm, 67mm, 72mm )
1 x Protection Bag
1 x Manual in English and Chinese
- 1.LARGE-SIZE LCD DISPLAY / LED AF ASSIST LIGHT
- 4.PROVIDED WITH EXTERNAL POWER SOCKET / AUTOMATIC SETTINGS SAVING
- 2.SOUND PROMPT SYSTEM / HIGH SPEED RECYCLING SYSTEM
- 5.EQUIPPED WITH PC SYNC INTERFACE / SUPPORT THE LENS OF MULTIPLE FILTER SIZE
- 3.SUPPORTS MASTER TTL FLASH / RING TYPE DOUBLE LAMP MACRO FLASH
User questions & answers
Question: | when i take a photo from Flash, the Pilot button turn into green color , and the flash do not work ,wait for 1 min, then the flash work ?? whats probl |
Answer: | Hi leamsi d.,It works with all DSLRs with standard hotshoe socket, but it seems that a Canon powershot 410is doest not have hotshoe socket, so it might not work. |
Question: | I have a sigma 105mm lens, 62mm. Do I need a ring adapter? Which one |
Answer: | Hi JAB,Yes, it is compatible with a Canon EOS Rebel T1i; we have adapter rings from 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm, check your camera's lens filter thread size first. |
Question: | Can the flash remain lit for long periods of time ? Since their is no HSS |
Answer: | Hi Ole,Just checked with the tech guy, turns out that you need to switch your camera to manual mode, if the pics turns out black, lower the exposure time and adjust the aperture, i.e. if you shoot at 1/200 and the pics turns out black, set to 1/100 or 1/50 etc. |
Question: | Is it suitable for dental photography? did anyone try it for dental photos combined with a canon 100mm macro lens |
Answer: | Hi Christian B.,Yes, you can switch modes between continuous light and flash. |
Product description
The speed Lite el-100 is a compact and versatile flash that will brighten darkened rooms and fill in and prevent an under-exposed or noisy image. The speed Lite el-100 offers the performance and features to capture beautiful photos in a variety of scenarios. With the ability to Pivot and swivel, you can bounce light off ceilings or walls, depending on the situation.
- Compact, versatile and easy-to-use Speedlite
- Horizontal and upward bounce rotation capability
- Maximum guide number of Approx. 85 ft./26M at ISO 100
- 24mm wide-angle coverage
- Optical wireless flash function (sender and receiver)
User questions & answers
Question: | What does this do better than the 270ex ii? is it worth the extra |
Answer: | It looks like on Interfit website that that light system uses Fitting Type Bowens® / S-Type so if that is true then yes this should fit that system. |
Question: | Is this want compatible with canon eos rebel t7 1500d |
Answer: | no it won't |
Question: | I have an M6 with a 11-22mm lens will this flash work down to 11MM |
Answer: | this will not fit the promaster studio 300c flashes |
Question: | Hi:will this flash compatible with canon rebel t7i ? thanks |
Answer: | I'm gonna try to explain it as explicit as I can, since I'm not English native. If your flash fits Bowen accessories, then the speedring will fit on your flash, that's the only reference I can give you. I recommend you to check some forums before proceed with the purchase. |
Question: | Any chance this hood will fit with the bay iii to 43mm step up ring on |
Answer: | I don't know the brand name, but the best ones I've seen have a ball joint next to the light stand. That allows quick and easy angle and height adjustments. Good luck! |
Question: | I may get a lot of boo's and hisses from the crowd for asking this - but has anyone tried to mate this to a mamiya sekor 80mm |
Answer: | This product is flawed in so many ways. It doesn't come with any clamps. I had to buy some separately. It also did not come with instructions and I can't figure out what is its best use... i don't use it anymore. sorry i couldn't be more help. |
Product features
Speedlite EL-100
For anyone wanting to explore fun, creative opportunities with flash photography, the Speedlite EL-100 is a great option to add a compact and versatile flash to your photographic set-up. With expansive pivoting capabilities and 24mm wide-angle coverage, it can help add the light you need.
Take It Anywhere
Compact and versatile, the Speedlite EL-100 can slide easily into a camera bag and add light to a dark or dim environment. Weighing approx. 6.7 oz./190g without batteries, it won’t weigh down your camera, and can rotate and pivot to easily provide a burst of light where you want it.
Continuous Firing
Continuous shooting capability means there’s little downtime between flash photos.
Maximum Guide Number
A guide number of approx. 85 ft./26m at ISO 100 provides the right amount of light for many scenes
24mm Wide-angle Coverage
The Speedlite EL-100 covers a similar field of view as a 24mm wide-angle lens for well-lit images.
Flash Exposure Control
Exposure control lets you control the flash intensity and modify performance to match your needs.
Be Creative with Wireless Operation
Expanding creative possibilities, the Speedlite EL-100 offers a number of options for wireless flash operation, serving as either a sender or a receiver unit in an optical setup. Remote shutter release can also be achieved when used as a receiver unit with a compatible EOS camera.
Mode Dial with AUTO Position
To adjust to situations like a subject moving in and out of natural light, or in a dark room, the Speedlite EL-100's Mode Dial features an AUTO setting. This allows for your camera to determine whether the flash is needed and fire it only when necessary.
Product description
Power Management: Switch to the ON the flash will start charging (the charging indicator is dim).
- Vertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degrees; Note: Don't support TTL and the camera menu setting Function
- Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras,like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon EOS Rebel SL3/250D,Rebel T7/1500D 2000D,Rebel T100/3000D 4000D)
- Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim)
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
- Red charging indicator lamp flickers in every 1s; it indicates low battery; The flash unit has 8 steps of power output control which indicated by 8 pieces of LED
User questions & answers
Question: | Is there a way to power this via a DC wall adtpater instead of batteries |
Answer: | There is a side plug for power but the power cord is not included. |
Question: | Will this work on a Canon T6i |
Answer: | Yes. It doesn't work with some T7 because some early T7 didn't have the center pin in the hotshoe. T6 and newer T7 with the center pin will work |
Question: | Why does it turn my pictures white on my sony a |
Answer: | The Sony A7 has an advertised flash sync speed of 1/250 of a second. I don't own one but I've seen posts suggesting that some folks struggle to get it above 1/60th of a second. So when you use your flash, your camera may be forcing the shutter speed down to the maximum flash sync speed (1/250th or 1/60th of a second) WITHOUT OTHERWISE ADJUSTING YOUR EXPOSURE. So, say you're shooting outside on an overcast day and you want to use a fill flash. Without a flash maybe you'd be shooting at 1/1000th of a second or faster. With the flash you'd expect to shoot FASTER but, because of the slower flash sync, you're shooting slower. That slower speed means more light and that gives you a white image. To compensate, either use a filter to dim the entire scene or look into a camera with a faster flash sync speed. Unfortunately, faster is more expensive. |
Question: | Can this flash be fired by the Canon 60D internal flash control off camera |
Answer: | Yes. The 60D uses the Canon E-TTL flash system which fires a pre-flash to test exposure. You can set the TT560 to ignore this pre-flash. You won't get flash metering control via the camera, but it can trigger these flashes off camera. However, my own testing shows this flash only outputs 40% of the claimed power, so be aware of that issue as well. |
Product features
Neewer TT560 Camera Flash Speedlite
- Note: TT560 flash Don't support TTL and the camera menu setting Function
- Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim)
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
- Red charging indicator lamp flickers in every 1s; it indicates low battery; The flash unit has 8 steps of power output control which indicated by 8 pieces of LED
Product description
- Neewer NW670 (The second generation of VK750 II) E-TTL Speedlite Flash
- Compatible with E-TTL Canon flash automatically.
- It has wide angle diffusor and a built-in reflection panel.
- Features a wireless trigger sensor for slave flash usage.
- Charging socket for external power pack: adds a charging socket for external power pack.
- PC synchronous port:simple for you to use the PC synchronous line.
- Automatic temperature detection
- Recycle time:Approx.3s
- Rotation angle:Vertical: -7 to 90 degrees; Horizontal:0 to 270 degrees
- 2.4 GHz Wireless Flash Trigger with Remote Shutter Function
-It provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos.
- 3-in-1 wireless remote control for camera, speedlite and studio flash.
- 16 Channels Selectable
- Sync speed up to 1/250s
- Transmitter power:2 x AAA battery.
- Receiver power:2 x AAA battery
- Cable- C1 + Cable- C3 Connecting Cords for Remote Control
- Provides the convenience of a wireless camera shutter release.
- Camera connecting cords for remote controls with 2.5mm socket
- Flash Diffuser
- Soft Flash Diffuser:spreads and softens the light emitted from your flash unit,bouncing off ceilings and walls, instead of coming from a single concentrated light source.
- Hard Flash Diffuser:Reduces and softens harsh shadows behind subject and eliminates red eye effect which makes the light looks more balanced and natural.
- Lens Cap Holder
- Small button sticks to the front of your lens cap;fits snuggly around the circumference of your lens.
NOTE:Camera not included.
- Powerful Flash with High Guide No. 58 (m) / 19ft(at 15mm focal length,ISO 1 in meters/feet).
- 2.4GHz Wireless Flash trigger with 3-in-1 Functions: will trigger off-camera flash units, studio lights and cameras from up to 1meters / 328 feet away
- Charging socket for external power pack: adds a charging socket for external power pack. PC synchronous port: simple for you to use the PC synchronous line.
- Kit includes: Neewer Pro E-TTL Auto-Focus Flash + 2.4GHz 3-IN-1 Wireless Camera Flash Trigger and Camera Remote Control Function + 2 Cables(M-Cord +B-Cord Cables)for Remote Control + Hard Flash Diffuser + Soft Flash Diffuser + Lens Cap Holder
- Backed with Neewer 1-Year 1% Satisfaction Guarantee.
User questions & answers
Question: | What color temperature is the light? More like 2700K or more towards 5000K or what |
Answer: | I'm not sure but I do know they work on a t6 and the t3i so it may work. |
Question: | Does this version have an assist beam |
Answer: | It is radio...and it is not TTL. All it does is fire the flash. It does not communicate any other details except a flash fire signal. |
Question: | Does the flash and trigger support canon e-ttl. I know the flash does, but will it support it off the camera remotely using the flash with receiver |
Answer: | It should. I have a 70d and it works great on my camera. There is not too much of a difference between the two. Plus my dad has same flash for his rebel. Works great. |
Question: | Would it work with canon 70d |
Answer: | Yes, it works with my T5 as either a flash trigger or a camera trigger, there are instructions included to use it both ways. But this will NOT do TTL. |
Product description
The Canon Speedlite 270EX II is a compact, high-performance flash unit designed for the evolving EOS enthusiast. Developed for fun and easy flash shooting, when used with select Canon EOS DSLR cameras that have a master function, the Speedlite 270EX II can be used as a versatile wireless slave flash. This Speedlite can also be used with other compact digital camera models equipped with a dedicated flash shoe mount. User-friendly in both function and design, the Speedlite 270EX II flash's Tele/Wide function easily and elegantly allows adjustment of illumination angle and guide number to match shooting conditions. On your photographic journey, the Speedlite 270EX II is primed to be there at every step.
- Ultra compact, ultra lightweight, high performance flash unit
- Vertical bounce capability up to 90 degrees provides a wide range of picture taking options
- Slave function allows the flash to be triggered wirelessly
- Flash coverage can be switched between Normal and Tele
- Includes soft case, mini stand and instruction book
- Ultra-compact, ultra-lightweight, high-performance flash unit.
- Vertical bounce capability up to 90 degrees provides a wide range of picture-taking options.
User questions & answers
Question: | Will it work on the Canon 6D |
Answer: | yes off course, works wirelessly, and works in the hot shoe mount |
Question: | Compatible with Canon 60D? How is it mounted on the Canon 60D |
Answer: | The 270EX II mounts on top of any camera that has a hot shoe mount, and the 60D has a hot shoe mount so you should be good to go. The other Canon Speedlites will also work on your 60D. Enjoy... |
Question: | Is this flash compatible with the Canon EOS Rebel SL |
Answer: | I'm assuming its compatible with all canon dslrs. |
Question: | Thinking of using this as a backlight strobe slaved off a t4i. Will it have sufficient juice and recharge time for something like a headstshot shoot |
Answer: | I have both this flash and the 430EX, and I personally would not use this one for portraits unless I had no other option. It kind of depends on how you plan to use it? If you don't mind waiting or watching to make sure it is charged, then it would work fine. When I have done interior portraits I used a simple studio strobe setup and have used my 430EX in concert with these and it worked well, Recharge times on strobes are really pretty quick in comparison to either of these flashes, but the 430EX was fast enough for me. However, I have used my 270 EXII as a fill flash for outdoor portraits, and I was not satisfied. When I take portraits I like to try and capture the moment when a smile is good or when the look in the eye is just right or whatever and sometimes that requires taking the photos in quick succession. I had not been bothered or noticed any lag with the 270EXII prior to this so, when I recently wanted to get some outdoor portraits of my kids, I chose to bring it instead of the 430EX. I felt this was one of two mistakes I made that day. My second mistake was to not use fresh batteries and I found it very frustrating. Luckily I had new batteries, and I popped them in. This helped a lot, but I still found that when I used the 270EXII, I had to wait more than I would have liked, and I feel that I missed some shots and made everyone more frustrated because it took longer. I had several photos where I took the shot, but the flash was not recharged enough and did not fire (even with the new batteries). This was a learning experience for me and I will be bringing my 430EX in the future for this type of shooting. Always also have one or two sets of spare batteries as well.As for your question of having enough juice for a backlight strobe, I guess that would depend on your lighting scenario. I suspect that it would be fine for a highlight type of backlight. My 430EX definitely worked well in that scenario, but I have never tried the 270EXII. I am not as sure how well it would work for a backlight on the background. I have used the 430EX for that successfully, but seem to remember that it did not work as well as when I used the studio strobes (although I think some of that may have been more the light spread than the power). The 270EXII is even less configurable and powerful, so I would not do it unless I had no other option. if you are trying to decide on this or something like the 430, I would spend the extra money on the 430. If that is not an option and you want this flash for other reasons, than I suppose it would not hurt to try it as long as you understand the potential pitfalls.I hope this helps. |
Latest Reviews
View all
Vm Audio Bluetooth Audio Receivers
- Updated: 19.03.2023
- Read reviews

Yc Display Port Cables
- Updated: 13.03.2023
- Read reviews

Rain Jacket Women
- Updated: 27.07.2023
- Read reviews

Camco Water Heaters
- Updated: 15.05.2023
- Read reviews

Natural Protein Powder
- Updated: 31.05.2023
- Read reviews