8 best case logic go pro cases

• Designed to carry most extension poles, monopods and selfie sticks
• Fits upto three GoPro cameras, including GoPro Hero 9, 8, Max, Hero 7, 6, 5, 4, 3+, 3 & HD
• Compact Roll-up Construction with Shoulder Strap
• Industrial Grade Canvas and Weather Resistant Material
• Lightweight: 11 Ozs / Dimensions: 10" x 4.5"

User questions & answers

Question:	is this waterproof/resistant/repellant
Answer:	Just by looking I would say NO to water and minimal shock resistance. You might want to look at a beefier one. My 2 cents.
Question:	Does this work well with the hero 7 black
Answer:	I use this case for my macbook air only. I do have a mac book pro which measures about 14.25" x 10" and it does not fit in the case. hope this helps!
Question:	Does this work well with the hero5 black to easily store and protect the camera, not just the accessories
Answer:	Yes. the 7-10 inch case will fit the asus t100. It is a tight fit at first but less so after a few uses.
Question:	Does it come with the GoPro case
Answer:	I got this for my husband for his 13 inch MacBook Air and it fits great. He said it is just a little roomy because it is so thin.
Question:	is it water and shock resistant
Answer:	Suma, did your 15.6 laptop fit the 16" case? I have the same computer and am debating the 16 or 17 inch.
Question:	Would this fit a macbook pro with retina that has a speck case on it
Answer:	No it does not have a strap/handle. It is a very heavy duty protective sleeve with a heavy duty zipper to keep the computer clean. I use a backpack to carry the computer.
Question:	asus t
Answer:	I bought this for my 13" MBA (mid 2013 model) which has a Kuzy shell. This sleeve was very tight fitting on all sides except for the width (obviously, since the MBA is very thin), where the laptop is practically swimming around. It's difficult to both insert and remove, and the inseam that is supposed to protect the laptop from zipper scratches is useless (with my kuzy shell, the zipper is right against my laptop's side). Really a disappointment, as the responses to this question were what ultimately made me decide to purchase this, and it in fact does not fit comfortably at all. It's extremely snug--too snug.
Question:	I have the new Macbook Air (2013) with a speck hard case covering my laptop. Will my Air fit the 13-inch case logic neoprene sleeve
Answer:	Don't believe the other answers. The ASUS G750 is wider than most 17.3" laptops because of the fact it has two fans in the back (Seriously, why bring up an HP Envy?). I bought this sleeve for my new G750 and found that I could not get it zipped up more than halfway. It might be possible to get it to fit, but the stitching was heavily stained and I didn't want to tear the sleeve by trying to force it. Going to have to return it now because I trusted comments such as these.
Question:	I have Dell inspiron 15.6" laptop, will this 16" cover would fit that in
Answer:	I have not tried to fill the case with your equipment, so I can't say for certain. I've found though that with the MBA cord and charger in the pocket, there isn't a lot of room for much else. I don't believe all of the items you listed will fit in the small pocket.
Question:	Didn't see a handle/strap. Does it have one? How do I carry it
Answer:	this case has enough room for a shell cover for sure! I love my case so far. the pocket on the front is by far my favorite part. Good luck!
Question:	Will the sleeve fit if the macbook air has a hard shell cover on it
Answer:	It depends on the size of the charger and the external hard drive. The pocket is roughly 7 inches wide and ranges from 5-7 inches high (as you can see in the prodect photo the top of the zipper is at an angle). The neoprene for the pocket is thinner than the body of the sleeve and it is quite stretchy. I have a toshiba portable hard drive that is 5 inches x 3 inches x 3/4 inches and, with it's cable, it fits in there just fine. My power supply is an Lenovo model 42T4430. With the cord wrapped around the power supply, cinched with the velcro strap, the power supply package measures 7.5 inches x 3 inches x 2 inches. Those two items do fit in the zippered external pocket of this case. It stretches the pouch a little but certainly doesn't stress the zipper at all. Even with my power supply and portable hard drive in the pocket, there's still enough room for 3-4 thumb drives or SD cards. There wouldn't be enough room to add my mouse.Hope that helps.
Question:	Will this fit a 17.3 gamer laptop, Asus G750 series? need it for extra protection in backpack
Answer:	For a 13in it will be a tighter fit for the computer, or basically fit nice and snug for the comptuer with less space for it to move around. The case is more for a macbook pro 13inch.
Question:	Entering College Freshman- Just got a NEW 13" MBA (!!!) Now, iso thick neoprene zippered cover w/ pocket which will accomodate BOTH the the MBA w/ Cord & Charger, AND the USB Superdrive w/ Cord. Will this case fit all at once? (Yes, I know it is not necessary to carry all simultaneously- I just want to
Answer:	It states that compatibility is with iPad Air 2.
Question:	I have a speck hard shell cover on my MacBook Pro w/retina. Will this case be too snug with the hard shell or is there some give? Thanks
Answer:	This case will only work on iPad Air and not the iPad Air 2.
Question:	Is the small pocket big enough for an external hard drive and the laptop's charger
Answer:	It works with an iPad Air. That’s all I know.
Question:	How fit is this sleeve for a Mac Book Pro retina
Answer:	It's on mine, which I purchased a few months ago.

Product features

Travel and capture your worldly adventures without the added hassle of traditional camera bags.

With a compact roll-up design, the Armor Bag stores all your travel photography essentials from cameras, mounts, remotes, and more. A lightweight and durable build ensures no accessory or camera be left behind.

• Designed to carry most extension poles
• Fits upto three GoPro cameras
• Compact Roll-up Construction with Shoulder Strap
• Industrial Grade Canvas
• 11 Ozs / 0.3 kgs
• 10" x 4.5" / 25cm x 11cm

Compatibility

• GoPro HERO5
• GoPro HERO4 Black
• GoPro HERO4 Silver
• GoPro HERO4 Session
• GoPro HERO+ LCD
• GoPro HERO+
• GoPro HERO
• GoPro HERO 3+ / 3 / 2 / HD

ABOUT SANDMARC



SANDMARC is an action gear brand designing premium accessories for GoPro & DJI. Our vision is enabling photographers, action sports athletes, and outdoor enthusiasts capture next-level content.



Thanks to our fans and customers across the globe, SANDMARC is sold worldwide with a growing 200K+ followers on social media. Our products have been featured on CNET, Digital Trends, Men’s Journal, Gear Junkie and more.

 

Product description

Accented with vibrant red detailing, this camera case is tailored to fit most high zoom digital cameras. Carrying options include a convenient belt loop or detachable lanyard. Storage options provide a home for your cords and accessories.

From the Manufacturer

• Camera Bag Compatible with Most Compact System, Hybrid and High Zoom Cameras, Quality Materials and Logical Organization Ensure Your Camera Is Stored Safely Inside, yet Instantly Accessible
• A Flex Wall Inside Camera Case Separates Accessories from Camera and Provides Added Protection When Not in Use.
• Internal Zippered Pocket Stores Memory Cards, Slip Pocket Inside Camera Case Separates Accessories from Camera
• Integrated Belt Loop, Padded Handle and Removable Shoulder Strap Offer Multiple Carrying Options. Side Zippered Pockets Store an Extra Battery, Cables, Lens Cap, or Small Accessories
• Fits Devices - 5.1 x 3.3 x 5.8 in , Material - Polyester, Warranty - 25 years.
• This bag is large enough to contain a camera body only, and is not large enough to fit a camera body and lens

User questions & answers

Question:	Just got a Nikon P510. It should fit right
Answer:	if you check the review someone says it does fit their Nikon P510. its a really nice bag and my Nikon Coolpix L820 fits great in it. go threw the reviews and look at the measurement. should give you a better idea
Question:	What are the physical dimentions
Answer:	If you check the dimensions given in the information on this product you will find the size. HOWEVER, I believe they have overstated the size by about an inch in two of the three dimensions given. I bought it to use for my Sony Cybershot DSC-HX200V which is a hybrid camera that is smaller than the SLR camera. It barely fits in this case. I was disappointed and then purchased the AmazonBasics Backpack for SLR cameras & assessories. It is great! Holds the camera, cables, etc. plus my point and shoot camera. I use the Case Logic just to carry the camera along out on a photo shoot. I guess it depends what you are going to use the Case Logic for as to whether you will find it adequate.
Question:	Will my Canon EOS Rebel T3 EF-S 18-55 II fit inside this bag? Room for an extra lens
Answer:	I am not sure if this helps, but I will transfer some of the researching back to you. This is what I can help with: I have used it to store a Sony camera Sony Cyber-shot DSC-HX200V. I also stored some accessories in it such as extra batteries, wall charger, USB cable. Depending on what kind of lens and size of box you have on it, it may be possible to add it, but the most important thing is to make sure the camera fits confortably first. As far as the bag goes, it is a bargain for the quality. http://www.amazon.com/gp/product/B006K551TO/ref=wms_ohs_product?ie=UTF8&psc=1One more thing, since you would by it from Amazon, in case it does not fit you can return it in selling conditions with all materials/packing shipped with it.
Question:	What are the case measurements - height, depth, width
Answer:	The DCB-304 measurements should fit devices (l x w x h): 5.8 x 4 x 4.6 in. NOTE- The width at the top is 5.5 as opposed to 4 at the bottom. ---- The exterior dimensions are: Size (l x w x h): 7.5 x 4.75 x 7 in. I use a Canon Powershot SX50 HS and that fits in the bag very well and securely. It does not rattle around in the bag.

Product description

Accented with vibrant detailing and an additional pocket for storage, this Case Logic DCB313 camera case is tailored to fit most advanced point & shoot cameras.

• Quality materials and logical organization ensure your equipment is stored safely inside, yet instantly accessible
• Zippered front storage pocket holds an extra memory card or small accessories
• Camera case fits most advanced point and shoot cameras
• Fully adjustable shoulder strap
• Detachable shoulder strap and belt loop allow easy transport
• Size 3.9 x 2.4 x 5.7 in
• Fits devices 3.9 x 1.8 x 5.5 in

User questions & answers

Question:	what are the dimensions
Answer:	Will NOT fit that camera. Listed dimensions for bag are in error. My Panasonic Lumix XS50 will not fit. It is a fairly small camera. Try to Lowepro Portland 20 (some extra space) or 30 (very generous too big?)
Question:	What are the interior dimensions? I intend to put in a camera that measures 1.6 by 2.4 by 4.2 with the addition of a grip strap
Answer:	I recently bought this case to carry my underwater camera measuring 5.7 x 2.1 x 5.5 inches and it fits perfectly. It even has a little bit of room to tuck in a wrist strap without having to detach it from the camera.
Question:	What are the dimensions
Answer:	I don't understand why people are purposely posting completely false information. I just received one today June 13th, 2016. 4 x 2.5 x 1" is all that it is.
Question:	Will a camera size 4.2x2.4x1.4 Fit in this case
Answer:	Yes, it will. My camera is 4.2x2.4x1.3 inches (so just 0.1 in smaller on one dimension) and it fits in, so I'm sure yours will fit perfectly. Just use the exterior pocket for extra batteries instead of the interior sleeve.

Product features

Case Logic DCB313 Advanced Point and Shoot Camera Case

Accented with vibrant detailing and an additional pocket for storage, this camera case is tailored to fit advanced point and shoot cameras.

• Zippered pocket stores memory cards and other small accessories
• Detachable shoulder strap and belt loop allow easy transport
• Quality materials and logical organization ensure your camera is stored safely inside, yet instantly accessible

Product description

An Amazon Brand

• Zippered pocket stores memory cards and small accessories
• Durable nylon and interior padding protect your camera against daily wear and tear
• Internal Dimensions: 4.3" x 2.5" x 0.9" (LxWxH)
• External Dimensions: 4.9" x 3.2" x 1.6" (LxWxH)
• Best suited for Canon 530HS, Canon SX620, Sony RX-1OO, Canon S120; other models may also fit but is not guaranteed

User questions & answers

Question:	Would the large size fit Canon Powershot G
Answer:	The dimensions are big enough for PowerShot camera two battery and charger
Question:	Does a nikon coolpix s33 fit
Answer:	No. Both exterior sides look exactly the same; so you should know from this photo what both sides look like on the outside.
Question:	What does the term "belt loop strap" mean? Is it an actual belt loop as in a pair of pants, or something else? Will it go on a "real belt" or is there another configuration
Answer:	I’m not sure, but if it’s any guide, my canon elph 190 fits easily, with pockets for a lens cloth and two extra batteries
Question:	Can someone please just list the internal dimensions without referencing another camera? For the large version
Answer:	I do not know, but if you measure your camera and look at the dimensions of the case you are interested in that could help. Sorry

Product description

Casey is the perfect GoPro travel and storage solution. It fits inside a backpack, but is large enough to carry two or more Hero cameras, mounts and accessories. The water-resistant, semi-rigid shell guards against rain and light snow. A padded interior protects your camera, while removable dividers let you create customized compartments.

• Conveniently keep your GoPro, mounts and accessories together All in one place
• Fully customizable to fit any gear setup
• Durable, semi-rigid shell and padded inner walls protect and cushion gear
• Weather-resistant design guards against light rain and snow
• Features a removable pouch that’s perfect for storing batteries, thumb screws, micro SD cards and more
• Includes 1 Year GoPro Manufacturer

User questions & answers

Question:	Will the Karma Grip fit in this
Answer:	No. The Karma grip is longer than the length of the Casey and will not fit inside.
Question:	Does the Karma Grip fit in this case
Answer:	I would like to know this too ASAP!
Question:	Does this case have a handle or place for a carabiner
Answer:	Hi Dorraine, it does, it's on the backside of the case and is a combination of stitched nylon and some sort of plastic/poly piece. Hope this helps.
Question:	Does it come with the go pro
Answer:	No, just the case to carry a go pro.
Question:	Will this fit under the seat on an airplane
Answer:	Yes it will and it will also fit in the overhead compartment :)
Question:	Are the accent colors red or orange. Some of the pics posted online look orange and some look red. Can anyone confirm
Answer:	The color is red, however, the internal dividers were not sewn well, and the seams all came unravelled very quickly. The velcro also seperated from the dividers upon the first pull, making them pretty much unusable to customize the inside of the case. I went with another case, it was a bit more, but there's no comparison in quality between this cheaper one, and one that cost about twice as much. Spend a little more and save yourself the trouble of sending this one back to just end up with the more expensive one that actually allows you to carry your items in an organized, protected manner.
Question:	I have a 28-300 lens, would it fit in this bag
Answer:	With a lence 24-105 the camera+lens takes half of the distance from top to bottom in the bag. Inside the bag is about 40x30cm.
Question:	The top hand strap broke. Is there a way to fix it
Answer:	I would try sewing it. One of the shoulder straps broke and I sewed it. Now its good but when I can I avoid picking it up with the straps!

Product description

The Case Logic TBC-403 Medium Camera Case has quality materials combined with a minimalist design provide reliable protection for your medium sized camera or compact camcorder. Plus, bring along a small accessory with the exterior zippered slip pocket.

• Compatible with medium cameras and compact camcorders
• Durable dobby nylon and interior padding protect your camera against daily wear and tear
• Carabiner and belt loop allow for easy transport
• Zippered pocket stores a memory card or other small accessories
• Size 5.5 x 2.2 x 3.7 in; Fits devices 4.6 x 1.7 x 3.2 in; Weight 0.13 lb; Materials - Dobby Nylon

User questions & answers

Question:	what are the inner dimensions
Answer:	The inside dimensions are approximately 4.5" long x 3.25" high x 1" thick (deep). You have to understand that there is some give/flexibility in the case. It is not ridgid. I use mine to store my Sharkk bluetooth speaker. I accidentally dropped the speaker in this case a short distance on the floor with no damage. The clip is nice to hook onto your belt loop. Hope this helps. Russ E.
Question:	Can this fit the Sony Rx
Answer:	Based on the dimensions i found on the case and your camera, it should fit nicely in there. probably got some breathing room too.Case Logic Medium Camera Case TBC-403Product Dimensions: 5.5 x 2.2 x 3.7 inchesSony DSC-RX100Product Dimensions: 4 x 1.4 x 2.4 inches
Question:	will it fit the lumix zs
Answer:	I don't know, I bought the case for an Olympus XZ-1 and its a very tight fit.
Question:	Would this fit a Canon Powershot G1X? The camera's dimensions are: 4.60 x 3.17 x 2.55 in
Answer:	I have this case and it fits my Canon G15 comfortably. The G15 dimensions are 4.20" x 2.99" x 1.58". You might be able to fit a camera that's about 0.25" larger in any dimension, but any more than that and it would be a stretch. The G1X is almost 1" thicker so I'm doubtful it would fit.

Product features

Case Logic TBC-403 Medium Camera Case

Quality materials combined with a minimalist design provide reliable protection for your medium sized camera or compact camcorder. Plus, bring along a small accessory with the exterior zippered slip pocket.

• Compatible with medium cameras and compact camcorders
• Durable dobby nylon and interior padding protect your camera against daily wear and tear
• Carabiner and belt loop allow for easy transport
• Zippered pocket stores memory cards and other small accessories

Product description

• 2 Camera Compartments: Fits all GoPro HERO cameras/Camera straps to secure cameras
• Large Accessory Compartment: Fits a broad range of accessories
• 2 Mesh Pockets: Hold clips, remotes, batteries & more
• Zip Pocket: Keep cables and memory cards safe & secure
• Durable Materials: Weatherproof zippers & canvas backing

User questions & answers

Question:	I have the Hero 4 and following accessories: GoPro 3-way, Chesty, hand strap, extra batteries, remote. Will this all fit? Is there room for more
Answer:	Yeah it'll fit! I've had two gopros, chest mount, remote, extra batteries, wall charger and like 6 back covers for the case. It all fits!
Question:	Would the gopole reach fit in here ? I think it's 17 inches when collapsed
Answer:	No. It fits my GoPole bobber with just an inch to spare.
Question:	Does the accessories in the photo come with the case
Answer:	It does not come with accessories.
Question:	The 6th photo shows 2 GoPros and a bunch of accessories. Will all that stuff fit in the case at the same time
Answer:	I normally keep 2 gopros, the gopro 3 way tripod/stick,some mounts and arms, a couple batteries and a wasabi double battery charger it fits excellently.

Product description

Protect and Organize Your Camera and Accessories

The sturdy exterior and durable zipper provide protection from external hazards.

Compact size will allow you to conveniently store the case in carry-on luggage when traveling.

Soft, elasticated mesh pocket will allow you to securely store cables and other accessories.

This case is suitable for GoPro Hero 1, 2 and 3.

The interior is lined with a layer of soft foam to provide added protection and features precise compartments for your equipment built into durable EVA foam

Contents:

- 1x GoPro Case (Medium: 9 x 6.5 x 2.75 inches / Small: 6.5 x 4.5 x 2.75 inches (width x height x depth))

- 1x Cleaning Cloth

CamKix If for any reason you are unhappy with any product by CamKix, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently! CamKix-USPTO# 86127507- is a registered trademark protected by US Trademark Law. CamKix products are sold by authorized sellers only.

• FULLY CUSTOMIZABLE INTERIOR: Our cubed and perforated Magic Foam will allow you to design your own interior layout completely tailored to suit your needs.
• EASY TO CREATE: Simply mark out the shape of the object you want to store and gently remove the superfluous foam. The case can be used to store anything you like, not only GoPro equipment!
• DOUBLE POCKET IN CASE LID: There are two soft, elastic mesh pockets in the lid of the case. These can be used to store cables and other small accessories.
• PROTECTIVE EXTERIOR: The outside if the case is made from durable nylon mesh. It is both tough and lightweight, so it will protect the case contents and while being very convenient to carry.
• IDEAL FOR TRAVEL OR HOME STORAGE: The case is 13 x 8.5 x 2.5 inches (width x height x depth) so it is a convenient size to keep at home or carry with you. It also features a convenient handle at the top making it easy to transport.

User questions & answers

Question:	Will this work for my new gopro hero 5 black camera
Answer:	The foam is removable.The case comes with the customizable foam already in it.
Question:	If you have used this for more than a couple months, please comment on the durability of the foam. Do they hold their shape well
Answer:	Hi RiseOne,This CamKix Carrying Case as follows is only compatible with a Gopro Hero 4, Black, Silver, Hero+ LCD, 3+, 3, 2 and will not work with the Hero5:https://www.amazon.com/dp/B00J92LB62The Extra Large Carrying Case with Fully Customizable Interior is the one that will work for Gopro Hero 5 Black, Session, Hero 4, Session, Black, Silver, Hero+ LCD, 3+, 3, 2, 1:https://www.amazon.com/dp/B00KBKHYKSBest,Mynchie/ECO-FUSED
Question:	Can I remove the foam it comes with and add the camkix custom foam that i can customize to my needs
Answer:	There is no direct feedback on the remote itself. A small blue light on the remote illuminates when you press the shutter button, but that does not tell you if the phone video/photo function has been activated. The only indications are the usual ones on the phone itself; shutter sound, video recording icon, etc. So, if the phone is some distance away, you have no direct confirmation that it is recording other than looking at the phone itself. However, if you make certain the remote is paired properly with the phone via Bluetooth, and the distance between the remote and phone itself is not too great (generally 30 feet or less for Bluetooth), I've encountered no problems with activation. The remote has performed consistently every time. Hope this helps.
Question:	Will this work for Hero
Answer:	Hi, The Camkix Bluetooth Remote Shutter works by mimicking the function of the volume rocker; the way it can be used as a shutter for the built-in camera of both Android and iOS devices. Regards, Michelle/Eco-Fused