14 best stand brackets

Product description

Set of FOUR. Double pre-set angle brackets give you full side-to-side stability. Heavy duty weight capacity of up to 1000 lb. For Tree Houses, Deer Stand, Swing Sets, Observation Decks, Outdoor Platforms and more. Quick and easy assembly, adds additional support to any project. Brackets are built strong for tough performance. These heavy duty brackets support your large scale projects. Use the Brackets on ladder stands and for additional support on extra-large projects already using this. The brackets are quick, easy, and won’t let you down. Use this when your projects need additional support not provided with this.

• WHAT YOU GET - Set of FOUR 4x4-inch double angle heavy duty brackets, powdered-coated 13 gauge steel.
• EASY TO USE - 12 Pre-drilled nail/screw holes(φ=0.4’’) on each bracket (screws are not included)
• HEAVY DUTY BRACKETS - Tough for durability & rust prevention; long-lasting, rugged craftsmanship for years of load-bearing performance
• MULTIPLE USES - Works great for securing legs to deer hunting box stands. Most commonly used to outdoor platform, shooting platform, shooting shack, deer hunting stand, play sets, tree house,etc. Use with straight 4x4 legs
• BUILD BETTER - Feature an 8° angle that is scientifically proven to be the optimum angle for vertical load and preventing side-to-side sway

User questions & answers

Question:	Product description says 8 degree angle. Is that the correct angle? It's a compound angle bracket.... Is it 8 degrees in both directions
Answer:	All 4 will support up to 1000 lb. Not 1
Question:	Can these be welded to a steel base
Answer:	These brackets are powdered-coated 13 gauge steel.
Question:	The description says.. weight limit of 1000 lbs. Is that for each or as a set of
Answer:	Very light
Question:	What gauge steel
Answer:	The soles of these shoes somehow come out from underneath my feet. I'm not sure how else to explain it because I've never experienced it with anything but flip flops. The point is, do not wear these for tennis or anything else where you might move to the side. Since I take my dogs for walks and their pattern of "walk" is "serpentine," I can't wear them anymore. I probably only wore them a dozen times, each time nearly rolling my ankle as my foot went to the side and the shoe just slipped. I guess this could be user error, but I'm 41, a former very active athlete, and still active adult, yet these are the first shoes I've owned that do this.

• PACKAGE INCLUDED---4x4in double angle heavy duty brackets.12 pre-drilled nail/screw holes on each bracket (screws are not included).
• HEAVY-DUTY CONSTRUCTION –--- Mofeez brackets crafted of tough, powdered-coated 13 gauge steel for durability & rust prevention; long-lasting, rugged craftsmanship for years of load-bearing performance.
• MULTIPLE USES---Works great for securing legs to deer hunting box stands.Most commonly used to outdoor platform,shooting platform, shooting shack,deer hunting stand,play sets,tree house,etc.Use with straight 4x4 legs.
• If there are any concerns,don't hesitate to contact us.We always be ready here.

User questions & answers

Question:	How far does the 4x4 go into the bracket
Answer:	Honestly this hoodie was lit the size I expected it to be. I believe I got one or two sizes up and it wasn’t oversized like I expected. I would try getting two sizes bigger than your original size. Be warned this top is shorter than in looks and the texture isn’t like any hoodie I’ve had. It is cute though!
Question:	What diameter lag bolts should be used 5/16 or 3/8?? Thanks
Answer:	No, the bunny ears don’t have any structure so they’re floppy.
Question:	What gauge is the steel
Answer:	Adults can wear them too if they like
Question:	Can these be used with 2x4's
Answer:	This cute rabbit ear long sleeve hoodie solid color embroidery pullover sweater could keep you warm all day in fall/winter.

Product description

The POWERTEC Miter Saw Stand Brackets have easy-release attachment clamps that allow for fast attachment and detachment of tool. They also allow a variety of tools to mount onto most miter saw stand brands. The POWERTEC MT4000MBA Miter Saw Stand Mounting Brackets fit miter saw stand frames made from 1-1/2” steel tubing with an overall width of 7”. The brackets can be adjusted approximately +, - ½” . Compatible with: POWERTEC MT4000Ryobi stand (model: A18MS01)Black and Decker standCraftsman miter saw stand (model: 16490)Home Depot brand fold and traveland other popular brands in the market. Please measure your stand to determine if the brackets will fit.

• INCLUDES: Miter Saw Stand Mounting Brackets and mounting hardware
• FUNCTION: The perfect OEM replacement, this bracket assembly utilizes tool mounts to allows you to attach and detach your saw and power tools from your stand. Extra sets will allow you to quick change multiple tools.
• DESIGN FEATURES: Ergonomically designed clamp handles for comfortable operation, along with a heavy-duty, durable steel construction featuring a black powder coated finish to withstand long-term wear and tear
• NON-MARRING: Equipped with premium plastic feet that can be used off the stand with level base to protect the brackets and prevent your work material from scratching
• UNIVERSAL: Fit miter saw stand frames made from 1-1/2” steel tubing with an overall width of 7” and can be adjusted +, - ½” Works with POWERTEC Deluxe Miter Saw Stand with Wheels and 110V Power Outlet (MT4000), along with the Ryobi Miter Saw Stand, and other similarly sized popular brands of miter saws

User questions & answers

Question:	My miter saws leg bolts are 14.5 inches apart. Anyone know if my saw will work
Answer:	Yes it seems to fit just fine with my 10" Dewalt Miter that I have. I would guess the 12" would be fine as well.
Question:	I have a Makita 12 inch slide. Will this stand fit my saw
Answer:	12" with adjustable clamp to 1". I use 3 different portahorse stands Black and Decker is a great stand for these clamps also Home Depot brand fold and travel, Menards also sells their own brand also I made my own stand for my work station. These clamps are great the handles on the sides make portability a major plus, they are a great value. I had purchased 4 sets to fit on my equipment.
Question:	Will my Dewalt 10" and 12" miter saws work with the supplied adapters
Answer:	Yes it is 8 degrees in both directions, which is scientifically proven to be the optimum angle for vertical load and preventing side-to-side sway.
Question:	What is the approximate width inside curve to inside curve of the clamping area? Ie. what width of stand will these clamps work on
Answer:	Don’t see why not. May want to grind off the the powder coat (in the area to be welded) before welding. Then just re-spray it with some rustproof paint

Product features

The Miter Saw Stand Mounting Brackets by POWERTEC.

This specialized set of brackets is designed for POWERTEC MT4000 Miter Saw Stand. They allow for the fast attachment and detachment of tools from the stand. Made with highly durable steel, these brackets were manufactured to offer a stable and heavy duty solution that won’t collapse while supporting mounted saws or other woodworking tools.

Standout Features

• Quick-Release Attachment Clamps provide effortless attachment and detachment of your tools.
• Ergonomic Clamping Handle for a superior and comfortable grip with exceptional control.
• Left and Right Bracket Handles for improved tool mounting and removal.
• Non-marring Plastic Feet to prevent your brackets from scratching your material.

Compatibility

Made primarily for the POWERTEC MT4000, these miter saw stand brackets fit stand frames made from 1-1/2” steel tubing with an overall width of 7” and can be adjusted +,- ½” and are also compatible with the Ryobi, Craftsman, Kobalt and other similar sized miter saw stands. With a little creativity and adjusting, they can even be used for routers, band saws and other compatible work station applications. (Please check the measurements of your stand to determine if the brackets will fit.)

Product description

4PCS Deer Stand Brackets

The 4 x 4 post brackets are made of steel material with a rustproof powder-coated process, providing high stability and durability. The heavy-duty platform brackets for multi-use applications like hunting stands, shooting shacks, tree houses. You can install the deer brackets only by fastening the bolts.

key Features

Stable Angle Brackets



The deer stands are designed with an 8° angle that is scientifically proven to be the appropriate angle for maximum stability and durability.

Large Load Capacity



Each double angle bracket can support up to 550lbs load bearing. It is reliable and trusted for you to set up a hunting platform or shooting shack.

Fits Versatile Posts



This hunting stands are suitable for different sizes of lumber, such as 2 x 4, 2 x 6, 2 x 8, and they use with a 4 x 4 in straight post as you want.

Stout Steel Material



The high-quality deer stands are built with a thick steel plate of 2 mm, which are ultra-strong and wearproof to handle any weather conditions.

Easy & Quick Assembly



The tree house hardwares contain required the split bolts and φ10 mm pre-setting holes for simple installation. You will be labor-saving during the process.

All-around Application



The blind brackets conduct excellent performance without maintenance. They are well-suited for outdoor platforms, deer hunting stands, shooting shacks, and tree houses.

Specifications

Model: VV--LJJDZ--GZTJ4pcs

Quantity: 4 PCS

Material: Steel

Load Capacity(Each): 550 lbs/100 kg

Product Weight(Each): 4.4 lbs/2 kg

Product Size: 7.1 x 4.3 x 9.7"/18 x 10.8 x 24.5 cm

Plate Thickness: 0.08"/2 mm

Hole Diameter: 0.4"/10 mm

• 【HIGH STABILITY BRACKETS】- Quantity: 4 PCS; Product Size: 7.1 x 4.3 x 9.7"/18 x 10.8 x 24.5 cm (L x W x H); Plate Thickness: 0.08"/2 mm; It is 8 degrees inclination, which is scientifically proven to be the optimum angle for vertical load and reducing side-to-side sway.
• 【HEAVY DUTY CONSTRUCTION】- The black deer blind brackets can totally weigh up to 2200lbs load capacity, adding additional support to build ladder stands, tree houses, and hunting platforms.
• 【USE FOR MULTIPLE LUMBERS】- The stake pocket on the bottom's internal size is 4.3 x 4.3"/10.8 x 10.8 cm, which suits 4 x 4" lumber in practice. Besides, the built-in stake pocket is designed for any dimension of lumber to meet your different demands, like 2 x 4, 2 x 6, 2 x 8, etc.
• 【PREMIUM STEEL MATERIAL】- Deer stand brackets are composed of high-strength steel construction with rustproof powder-coated finish. It is tough enough for long-lasting use with robotically-welded joints.
• 【EFFORTLESS INSTALLATION】- The elevated deer blinds are equipped with φ10 mm pre-drilled holes on each bracket. The included screwdriver and split bolts contribute to easy and quick assembly.

• Light Stand Bracket, Cold Shoe Mount with Umbrella Holder.
• Cold Shoe Flash Bracket- Universal cold shoe mount on top for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash)
• Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light.
• Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand.
• Material: Solid Metal body,abs knob.

User questions & answers

Question:	Unfortunately the top of my light stand is slightly too big, it's 5/8". Does anyone know of any speedlight mounts with a 5/8" opening
Answer:	Yes, it just twists off. The cold shoe is threaded onto a standard tripod size 1/4-20 thread. The threads are extremely soft though, and the whole thing is made from a really poor pot metal. I would recomend against too much taking things off and on again.
Question:	how big is the umbrella holder hole? Can I put a 46" umbrella on this
Answer:	If you mean to ask the max open of the super clamp, the Maximum opening diameter is 2.16".Hope this info be helpful for you.
Question:	Is the cold shoe easily removable
Answer:	David L. Miller answered correctly. The slots on the arm accepts a 15 inch span. So measure the distance between the bolt holes from front to back on your saw and make sure they are 15" or smaller and you're good. I have used this stand extensively this year. Its well worth the money. Very sturdy.
Question:	how wide can the clamps open
Answer:	It should there is a lot of adjustment on the clamp bars that bolt to the saw.

Product features

Features:

-A hole specially design for mounting umbrella.

- 180° Swivel joint allow vertical adjustment of the umbrella and flash in different angle.

- Cold shoe flash stand bracket on top. Suitable for All hot-shoe flashes except Sony and Minolta Brands.

- Attach the 1/4" to 3/8" camera spigot to mount the flash light stand bracket on a camera tripod or light stand.

Upgraded Metal Locking Ring

Sturdy metal locking ring provides the bracket a more durable and longer life than other plastic locking wheels, keeping the connection tight and solid.

What Will You Get

Package includes 2 x E-Type Flash Light Stand Bracket Mount

Note:

1.This adapter does not fit Sony and Minolta flash

2.Light stand, speedlite flash and umbrella are not included.

3.We add a pair of metal locking wheel, to better support the cold shoe mount on top without breaking.

Product description

About the Product

--- Material: 12-gauge Premium Steel

--- Color: Olive Green

--- Surface: Powder Coat Finish

Product Description

--- Compound angle maintain strength and stability.

--- Heavy duty weight capacity of 1000 pounds.

--- High-strength welded construction with corrosion-resistant powder coated finish, tough enough for long-lasting use.

About Highwild

--- Highwild designs and manufactures top quality shooting and hunting accessories.

--- We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down.

--- At Highwild, you will find exactly what you want.

• ▶ We use high grade materials - 12-gauge plate steel, which is much stronger than 13-gauge steel brackets.
• ▶ EASY TO USE - Each bracket is pre-drilled with 12 screws, which can be directly connected to the pillar or hunting room shelf. Set of 4 double angle heavy duty brackets can be disassembled freely and is convenient to us.
• ▶ EXTREMELY STURDY - Platform brackets feature an 8° angle which has been scientifically proven to be the best angle for vertical load and to prevent side-to-side sway; High-strength welded construction with corrosion-resistant powder coated finish, tough enough for long-lasting use.
• ▶ MULTIPLE USE - Works great for securing legs to deer hunting stands. Most commonly used for outdoor platform, shooting platform, shooting shack, deer hunting stand, play sets, tree house.
• ▶ PACKAGE INCLUDES - Set of 4 double angle heavy duty brackets. (screws are not included)

User questions & answers

Question:	How much weight will all four brackets support
Answer:	On these brackets and similar brackets I’ve always put the carriage bolt in from the wood side. The square of the bolt sinks into the wood and stops it from turning while you tighten the nut. Not exactly how carriage bolts were designed to work, but it works well in these and similar brackets.
Question:	Weight capacity of 1000 lbs, is that each or for all 4 building materials are not light and neither am I
Answer:	all four
Question:	The instructions call for carriage bolts to be used in some of the bracket holes. However the brackets do not have square holes to accommodate. Why
Answer:	The screw adapter is removable, allowing use with a standard 5.8" light stand stud.
Question:	Is the 1000 pound weight capacity for each bracket or 1000 pounds for all
Answer:	It depends on the circumference of the umbrella stem. I use a 43”umbrella and it works fine.

Product description

★ Sturdy Platform:

The 8° angle bracket can provide a stable structure to prevent side-to-side swing.

★ Stronger than Others:

12-gauge premium steel. Each bracket weighs more than 5 pounds. Stronger than competitors and can deal with any weather conditions.

★ Multiple Uses:

Used to outdoor platform,shooting platform, shooting shack,deer hunting stand,play sets,tree house,etc.

★ We are always here:

If there any issues, please feel free to contact us.

★ Package Includes:

4 PCS 4x4 Compound Angle Brackets

• HEAVY-DUTY BRACKETS - A-KARCK deer stand brackets built with 12 gauge steel. The weight of each bracket far exceeds the others, over 5 pounds. Sturdy enough for long-lasting use.
• BUILD STABLE PLATFORMS - This brackets feature an 8°angle, coupled with a high-strength welding structure, can effectively prevent side-to-side swing.
• QUICK ASSEMBLY - 12 pre-drilled holes on each bracket for lag screws or carriage bolts(screws are not included). Use with 4x4 legs, is the easiest way to build an outdoor platform.
• MULTIPLE USE - Works great for outdoor platform. Ideal for building your own shooting platform, deer hunting stand, tree house, tree house,etc.
• WHAT YOU GET - A set of 4PCS 4x4 brackets. The platform built by these 4 brackets can get a better view in the field. Let you enjoy the fun of being outdoors.

Product description

Please note: This Bi-Color, high CRI 96+ LED light has lower lumen compared to single color LED light. If you prefer higher lumen lighting, please refer to our single-color LED light. Descriptions: video light: LED Beads: 660 pieces white+330 yellow) voltage: DC 12v-15v power: 40W Color temperature: 3200-5600K lumen: 3360Lux/m CRI: 96+ Power Source: Power adapter(included) or replacement battery for Sony NP-F970 li-ion battery battery output: DC 14.8V size: 232x200x48mm lumen: 3360 lux/meter light stand: maximum height: 6.5 feet/2 meters folded height: 3 feet/92 centimeters material: metal tube diameter: 25-22-19mm max load capacity: 17.5 pounds/ 8 kilograms battery: battery type: Li-ion Capacity: 6600mAh battery charger: output voltage: DC 8.4V 600mA a/C power supply input voltage: AC100V~240V, 50/60Hz Max 150mA package Contents: 2 x 660 LED video light 2 x light stand 4 x battery charger 4 x battery 2 x Power adapter 2 x US plug 2 x white diffuser 2 x Carrying Case

• Kit Includes: (dimmable 660 LED video light, light stand(3-6.5 feet/92-200 centimeters), (battery Charger, 6600mah replacement battery, power Adapter, white diffuser, us plug and (carrying case
• 660 LED bulbs: with 330 white and 330 yellow LED long lasting bulbs, This light illuminates a variable white balance From tungsten-daylight from 3200 to 5600K; u-mount bracket: enables the photographers to adjust the lighting angle according to the shooting environment
• Premium material and multi-use: made of excellent quality aluminum alloy showing simple elegant appearance; can be placed directly on the light stand, ground or desk, providing multiple shooting solutions, more convenient for your creation work
• Sturdy and solid light stand: 17.5 pounds/ 8 kilograms load capacity; 3-6.5 feet/92-200 centimeters adjustable height to meet your various demands; solid locking capabilities are super simple and easy to use and ensure the safety of your lighting equipment when in use
• Ac/DC power options: power with AC adapter (included) or replacement battery for Sony np-f970 Li-ion battery; 1 year Warranty: Includes 1 Year Neewer limited Warranty and life-time e-mail customer Support

User questions & answers

Question:	How many dimmable 660 LED video light does it come with
Answer:	my kit has two "lights" each with many LEDs in them. All each light was dimmable.
Question:	What are the dimensions of the bag when the light is inside
Answer:	1 foot * 1 foot * 3.5 Inches
Question:	Does the light panel charge the batteries if the A/C adapter is connected while they are in
Answer:	No, these batteries only charge with the charging unit.
Question:	If using for green screen, what would be the largest area they could light properly
Answer:	These cover a substantial area. The trick with green screen is to assure the screen lighting is even, but with practice that's easily accomplished with these.

Product features

Neewer Bi-Color 660 LED Video Light and Stand Kit with Battery and Charger for Studio, YouTube Shooting (2 pack)

• Designed with U bracket for easy angle adjustment and attached barndoor for light source focus.
• Made of excellent quality aluminum alloy showing simple elegant appearance; Can be placed directly on the light stand, ground or desk, providing multiple shooting solutions, more convenient for your creation work.
• This is a professional lighting kit which is perfect to use in portrait photography, live show, YouTube video shooting, outdoor events, fashion display, Product display and more.

Professional LED Panel lighting

• LED Beads: 660 Pieces(330 White+330 Yellow)
• Color Temperature: 3200-5600K; Lumen: 3360Lux/m; CRI: ≥96

AC/AD POWER OPTIONS

• Power with AC adapter(included) or replacement battery for Sony NP-F970 Li-ion battery
• Power Adapter: DC 12-15V

Light Stand

• Maximum Height: 6.5 feet/ 2 meters; Minimum Height: 3 feet/ 0.92 meter
• Material: Metal; Tube Diameter: 25-22-19mm
• Max Load Capacity: 17.5 pounds/ 8 kilograms
• Pretty stable 3-Leg stage design and its solid locking system make sure all your stuff in safe when in use

Flexible Angle Adjustment

• Adjustable U mount bracket enables the light to rotate 360 degree to find appropriate angle for your creative work

Product description

THE BEST HELPER FOR OUTDOOR HUNTING ROOMS AND FIX WOOD STAKES - 4 PACK HEAVY DUTY STEEL DEER BLIND BRACKET



If you like the wild and nature, when you want to build your hunting house, you can choose our Hunting Platform Brackets!



Features of elevator brackets:



✔Sturdy: Platform brackets is made of durable steel and feature an 8°angle which has been scientifically proven to be the best angle for vertical load and to prevent side-to-side sway.



✔Long-term use: Heavy-duty steel deer blind brackets will not be affected by the weather, is not easy to rust, and can be used for many years.



✔Multipurpose: Hunting platform bracket can be used in fixed tree houses, deer stands, swing stands, viewing platforms and other places. The most common are outdoor platforms and shooting platforms, which can add more fun to your life.



✔Easy to use: Each bracket is pre-drilled with 12 screws, which can be directly connected to the pillar or hunting room shelf. Set of 4 double angle heavy duty brackets can be disassembled freely.



Package Includes:



4 x Blind Bracket

48 x screws

Note: Any size wood can be used for the platform itself (such as 2x4, 2x6, 2x8, etc.).

• HIGH QUALITY: The surface of the 4 x 4 deer bracket is black coated powder, which has been processed and welded with 13 grade high-quality steel to make angle bracket more fix the hunting rack.
• EASY TO USE: Each bracket is pre-drilled with 12 screws, which can be directly connected to the pillar or hunting room shelf. Set of four double angle heavy duty brackets can be disassembled freely and is convenient to us.
• STABLE AND STURDY: Platform brackets is made of durable steel and feature an 8°angle which has been scientifically proven to be the best angle for vertical load and to prevent side-to-side sway. Deer blind brackets will not be affected by the weather, is not easy to rust, and can be used for many years.
• MULTIPLE USES: Hunting platform bracket can be used in fixed tree houses, deer stands, swing stands, viewing platforms and other places. The most common are outdoor platforms and shooting platforms, which can add more fun to your life and enjoy the beauty of nature in the wild.
• CUSTOMER SERVICE: If you have any questions, you can contact us, we will have the best service for you until you are satisfied. Looking forward to your purchase of this deer blind bracket.

User questions & answers

Question:	Is it a set of 4 brackets or only one bracket
Answer:	You can build a 5X4 platform with 2X6’s, and some customers have tried it, and the effect is very good.
Question:	Is it safe to use these for a 8x8 platform
Answer:	5/16 size blind bracket hole.
Question:	How wide can I safely build a platform
Answer:	i put a 4ft. x 6ft deer stand on top of them. the stand is made of 2x3's and 3/8 inch siding and asphalt shingles. if i were to guess how much it weighs, i would say 5-600 lbs. Hope this helps.
Question:	What is the size of this hole
Answer:	I don’t know the correct answer but I used them on a 6x6x7 treehouse 8 feet in the air. I used all pressure treated lumber and household windows and they work great.

Product features

MIXXIDEA DEER BLIND BRACKET THE BEST HELPER FOR OUTDOOR HUNTING ROOMS AND FIX WOOD STAKES

If you like the nature and hunting, when you want to build your hunting house, you can choose our Hunting Platform Brackets!

Looking to build your own elevated deer stand for the upcoming season? Awesome, and I assume you are here to find a pair of elevator brackets to make it both quicker and safer. So let’s take a look at the MIXXIDEA elevator brackets and find a pair that suits your requirements and build plans. An elevating tower cab be made any height you want, by simply inserting your desired length of post.

Deer blind bracket is a revolutionary bracket that will change the way you think about elevating your hunting blind. the tower deer stand brackets are of a heavy duty steel bracket that quickly & easily attaches to the corners of a hunting blind with basic lag screws or bolts. the tower bracket has integrated leg sockets that allow any length of 4*4 post to slide up inside, creating legs under your blind.

BUILD BETTER PLATFORMS

QUICK AND EASY ASSEMBLY

VEHICAL FITMENT

MULTIPLE USE OF DEER BLIND BRACKET

It’s the most versatile blind component ever made. An elevating tower can be made any height you want, by simply inserting your desired length of post.

Sturdy: Platform brackets is made of durable steel and feature an 8°angle which has been scientifically proven to be the best angle for vertical load and to prevent side-to-side sway.

Long-term use: Heavy-duty steel deer blind brackets will not be affected by the weather, is not easy to rust, and can be used for many years.

Multipurpose: Hunting platform bracket can be used in fixed tree houses, deer stands, swing stands, viewing platforms and other places. The most common are outdoor platforms and shooting platforms, which can add more fun to your life.

Easy to use: Each bracket is pre-drilled with 12 screws, which can be directly connected to the pillar or hunting room shelf. Set of 4 double angle heavy duty brackets can be disassembled freely.

Above all, it tends to be utilized to get your deer stand set up on unlevel ground! Simply slice the wooden legs to measure and get your blind set in the best spot, if it's level! The Tower is solid, steady, safe and trustworthy.

Product description

About the Product

--- This is a perfect way to add a portable and easy to use target stand to your range.

--- Note: 2x4 board actual size is 1-1/2" x 3-1/2".

About Highwild

--- Highwild designs and manufactures top quality shooting and hunting accessories.

--- We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down.

--- At Highwild, you will find exactly what you want.

• ▶ Support both 2x4 board and Highwild adjustable steel post.
• ▶ Tripod base with 5-inch deep socket for excellent stability.
• ▶ Heavy Duty Steel Construction & Corrosion Resistant Powder Coat Finish
• ▶ Mounting hardware included.(TARGET AND LUMBER NOT INCLUDED)
• ▶ See other buying options in this listing to build your own stand!

User questions & answers

Question:	Has anyone had issues with or had to replace the carriage bolt due to damage from shooting it
Answer:	sadly.. this isn't the place.. contact the seller. you should also be able to return it. (hopefully).
Question:	Is this 1 or 2 hangers for that price
Answer:	Put the 2x4 into the opening on the bottom making sure the bolt in the rear is backed out then use a dead blow hammer to beat the mount down onto the 2x4. Tighten the bolt and you are ready to go.
Question:	Hi, i ordered this this morning by mistake and tried to cancel about 30 minutes later, it's telling me i can't. can you please help me
Answer:	4 brackets per set
Question:	I dont know how to attach these to the 2x4. No instructions were included. Ive mounted them to my gong targets but dont know how they attach
Answer:	I used them on 2 4x4s and 2 4x6s. Made heavier brackets for the 4x8. Thought they were not strong enough for that much weight

Product description

Jeacent Ground Mounting Stand for Ductless Mini Split Air Conditioner Heat Pump Systems

Why you need this mini split air conditioner brackets?

Brackets add a measure of security once the machine is installed, helping support the machine's weight. They can protect your air condition heat pump system; prolong its using life and make your yards or garden looks more decent.



Specifications:

* Rust proof solid epoxy coatings

* Heavy duty -Height of 16 inches

* The support holds over to 300 pounds

* Compatible with all units 9000 BTU - 36000 BTU

• 🌈【WEIGHT CAPACITY】Supports over 300 Pounds.
• 🌈【FUNCTIONAL】Keeps your mini split units off the ground soil and add stability. Its off wihte color make it look decent with the condensers.
• 🌈【DURABLE】Made of solid galvanized steel and epoxy painted construction; weather resistant.
• 🌈【ADJUSTABLE】Allowing compatibility for most systems.
• 🌈【EASY TO ACCEMBLY】Slab Condenser Stand is easy to install and provides excellent support to the unit.It is a very solid installation.US Patent Pending. All Rights Reserved.

User questions & answers

Question:	can this be placed over soil? or does it need to sit on a more solid surface
Answer:	It does not need to be bolted into the ground. The weight of the air conditioner holds down the stand.
Question:	can height be added
Answer:	Most likely. It’s adjustable
Question:	So the Ground Stand Bracket just sits on the ground, no need to bolt it
Answer:	yes, the grade 5 bolts can be damaged by direct hits. grade 8 bolts are better but hard to find in carriage configuration.
Question:	will this stand fit a Senville model 24cd/0z outside unit
Answer:	2 hangers for $46.99

Product features

Jeacent Ground Mounting Stand for Ductless Mini Split Air Conditioner Heat Pump Systems

Why you need this mini split air conditioner brackets?

Brackets add a measure of security once the machine is installed, helping support the machine's weight. They can protect your air condition heat pump system; prolong its using life and make your yards or garden looks more decent.

Specifications:

• Rust proof solid epoxy coatings
• Heavy duty - Height of 16 inches
• The support holds over to 300 pounds
• Compatible with all units 9000 BTU - 36000 BTU

Product description

Deer hunting can take us to all variety of terrain and having the best setup for our area can make the difference in the success of the hunt. These high strength steel powder coated elevated platform mounts give you the opportunity to create a hunting blind platform that is unique and custom to your every need. All you will need is your own 4x4 wooden posts cut to whatever length you desire for your specific needs. The angled legs will provide the added strength for your blind platform and using lag screws in the pre-drilled holes will secure everything together. Climb to the top of your custom work of art and let the hunting season begin!

Copper Ridge Outdoors Elevated Platform Mounts (Set of 4)

Made of 11 gauge high strength steel that is powder coated for corrosion resistance.

Create Any Size Elevated Deer Blind Platform

Deer stand brackets have channels designed for 4x4” wooden posts, 3 5/8 inch internal channel width, giving you the ability to create the precisely sized hunting blind platform for your specific needs.

Angled Legs Provide Stability

7 degree outward angled legs provide the solid base your hunting blind platform will be built upon.

Pre-Drilled Holes

Multiple holes drilled into the steel elevated platform brackets to secure lumber to the platform mounts with lag screws.

Discover the Difference - Explore Copper Ridge

Direct Outdoor Products has over 10 years of experience designing and manufacturing Tree Stand Accessories. This all comes from over 20 years of experience in product development and design. We strive to always help outdoor enthusiasts perform better while having a memorable experience in the field. It is our mission is to fulfill your needs and exceed your expectations by setting the bar through innovation, safety, service, and experience. Our commitment to you is quality products with an unbeatable value. Take your hunt to the next level with Copper Ridge Outdoors!

• HEAVY DUTY: 11 gauge powder coated steel brackets provide strength to create your deer hunting blinds elevated platforms.
• LARGE CHANNELS: Channels designed for 4 x 4 wooden posts horizontally and vertically, 3 5/8 inch internal channel width, allowing you to customize your elevated blind platform to any size using your own lumber.
• SECURITY MINDED: Elevated Platform Brackets mounts are pre-drilled for lag screws to secure the lumber to the mounting 4x4 corner brackets.
• EXTREME STABILITY: 7 degree outward angled legs provide a solid base to build your elevated deer blind platform upon.
• Copper Ridge Outdoors Elevated Platform Mounts (Set of 4) weighs 34 lbs.

User questions & answers

Question:	are they true 4" x 4" or 3 5/8" x3 5/8" openings
Answer:	The holes for the bolts are made to be used with 5/16" lag screws 3" long.
Question:	These shown are 3 way connectors. Is a 4 way available? Like for a cross beam
Answer:	Sorry we do not currently sell any angled brackets for the footers to anchor to the ground/concrete. We only sell the ones you see here for the elevated platform itself. Thanks for reaching out and checking with us however!
Question:	What are the size of the holes for bolts
Answer:	Hi, it might stuck in the soil if your unit is heavy and the soil is soft. We suggest you placed it on hard solid surface.
Question:	Do you have angled brackets for the footers to anchor into the ground/concrete
Answer:	Hi, the top where your unit stands can't be add height. But you could add the height on under the legs of the bracket if needed.

Product description

Have a second, additional tool mounted and ready to attach to your workstation right when you need it with the STEELMAN 67111 Additional Tool and Accessory Mount Bracket. Attaching with a simple clamping motion and featuring a powder-coated steel body and 6-inch support handles, this durable accessory is designed to securely mount onto your STEELMAN work stand or any dual tube workstation that uses 1.75-inch tube rails with a 3.5-inch space between them for a maximum width of 7-inches. Compatible with any miter saw or other tool with mounting dimensions of 14.75-inches or less when measured front to back, this mounting bracket includes all the hardware necessary to securely attach your tool as well as offset brackets for tools with offset mounting points.

• Steel frame - durable steel tool mount frame that won't buckle under the weight of mounted saws or other tools
• Wide compatibility - fits any miter saw or other tool with mounting dimensions of 14.75-inches or less front to back
• Included offset mounts - includes a pair of offset mounts for tools and saws with offset mounting points
• 6-inch support handles - 6-inch support handles make it easy to move and attach the mount to your workstation
• Compatible workstations - fits steelman and dual tube workstations with 1.75-inch diameter, 3.5-inch spaced tubes

User questions & answers

Question:	Will this fit a Iowa Manufacturing Stablemate saw stand
Answer:	The Protocol Stand has 1-3/4" tubes, 6-13/16" apart measuring from outside of tube to outside of tube.
Question:	Do the kit include the bolts, washers and nuts needed to fasten the saw to the item
Answer:	Mounting holes are elongated slots. You should be able to adjust to any miter saw.
Question:	What are the dimensions of this product? My miter saw stand has 1-3/4" rail tubes that are 8-3/4" apart
Answer:	They are 31/2 X 3 1/2 . Will fit 4 x4 post
Question:	Does it fit hitachi uu240f heavy-duty portable miter saw stand
Answer:	This is the only style we carry. Support boards can be attached on the horizontal beams much like you would construct a deck platform so you can attach them at as many intervals as you wish. For added rock solid stability and support we cross brace the vertical legs as well.

• 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash)
• 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle
• 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread
• 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash
• 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid.

User questions & answers

Question:	Can I attach it to a standard tripod ? If so do I need any other threads in order to attach to a standard tripod
Answer:	It will take a Really Right Stuff quick Release Plate,so I believe it will take an Arca / Swiss plate
Question:	Will it fit a mono pod
Answer:	comes with everything for 90% of all cameras (with screw holes in the bottom of the camera)
Question:	Does it fit altura off camera flash i-ttl
Answer:	Most shoes I've dealed with including newer are all pretty basic as far as fitting the other shoes I have just say you just going to have to try it out yourself I don't have a lot of equipment mismatched or I can try off brand with new brands
Question:	Are the main parts metal? or are they hard plastics
Answer:	I used adapter on a FlyCam HD-3000. It should work. Underneath the plate are 1/4 20 holes for the bolt. -Joe

Product features

FOTYRIG Camera Flash Speedlite Mount Camera Umbrella Holder E Type for Canon Nikon Pentax Olympus Nissin Metz and other Speedlite Flashes-2 Packs