14 best camera shutter release cords

Product description

This remote switch is designed to reduce camera shake to an absolute minimum. It is a perfect choice for taking long exposure photos. The remote has a two-stage release button, half-press to focus, fully press to trigger the shutter and take a photo. For long exposure, please press the release button fully and slide it into the locked position. The shutter will stay open as long as the shutter release button is locked. To unlock the shutter, just slide the release button back to its original position. This remote is powered by camera, you don't need to install a battery.



Package includes:



1 x Remote Switch

1 x 70cm long camera connection cord

1 x 130cm long extension cord

Compatible with Canon EOS Rebel Series DSLR cameras:



EOS Rebel XS(1000D)/T3(1100D)/T5(1200D)/T6(1300D)T7(1500D)

EOS Rebel SL1(100D)/SL2(200D)/SL3(250D)/XT(350D)/XTi(400D)/XSi(450D)/T1i(500D)/T2i(550D)/T3i(600D)/T4i(650D)/T5i(700D)/T6i(750D)/T6s(760D)/T7i(800D)/T8i(850D)

EOS 60D/60Da/70D/77D/80D/90D



Compatible with Canon Mirrorless Cameras:

EOS RP, R, R6, M6, M6 Mark II, M5



Compatible with Canon Powershot cameras:



Powershot G10/G11/G12/G15/G16

Powershot G1X/G1X Mark II/G1X Mark III/G3X/G5X

Powershot SX50 HS/SX60 HS/SX70 HS



Compatible with Pentax cameras:



K1/K3/K3 II/K5/K5 II/K5 IIs/K7/K30/K50

K10D/K20D/K100D/K100D Super/K110D/K200D/K500/645D/645Z

ist/ist D/ist DL/ist DL2/ist Ds/ist DS2/MZ-6/MZ-L/ZX-L



Compatible with Samsung cameras:



GX-1L/GX-1S/GX-10/GX-20/NX10/NX100/NX5

• Control autofocus and shutter triggering, Capture images without shaking camera
• Ideal for bulb exposures, super telephoto shots and macro photography
• Handy for taking pictures of subjects that are difficult to approach
• 70cm long camera connection cord + 130cm long extension cord
• It fits for Canon EOS Rebel T7(1500D),Rebel T6(1300D),Rebel T5(1200D),T3(1100D),T3i(600D),T4i(650D),T5i(700D),T6i(750D),T6s(760D), T7i(800D), T8i(850D), SL1(100D), SL2(200D), SL3(250D),XS(1000D), EOS70D,77D,80D, EOS RP, R, R6, M6, M6 Mark II, M5 and Other Cameras with Sub Mini Connection, Replaces Canon RS-60E3 remote

User questions & answers

Question:	Will this work with a battery grip on a 77D, or does the cord plug into the same place the battery grip plugs into
Answer:	I couldn’t use this one because of the nuts it wouldn’t fit. They do look stainless steel.
Question:	Will this work on a Nikon D70s
Answer:	yes, push down to close, pull up to open it
Question:	Is a longer extension available? I need 5 meters for my Nikon D
Answer:	I can tell you it sticks out 6.5” past the very end of the drain valve on my travel trailer
Question:	which one should I choose for cannon sl
Answer:	Wrap gorilla tape around the connection.

Product description

Threaded Cable Release is applicable to all cameras with a threaded shutter release button It can closely connect threaded shutter release button for a more reliable shutter release It can quick release the shutter to avoid the image shaking and can lock and unlock the bulb for long exposure shooting Product Highlights： - Closely connecting shutter thread hole for more reliable shooting - Quick release the shutter to avoid the image shaking - Bulb locking and unlocking design for long exposures shooting

• This is a top quality manual locking cable release works with film digital or professional video camcorders
• A cable release is used to eliminate camera shake for critical situation where the camera must remain perfectly still
• The tapered threaded end screws directly into your cameras shutter button
• Cable release is made of stainless wire and covered with a vinyl tube for durability Fotasy is a registered brand name
• Length 100cm

User questions & answers

Question:	Will it work with rolleicord camera
Answer:	it is for 2" PVC which measures 2 3/8" outside diameter
Question:	Will this work with a minolta srt
Answer:	No, not effective for flow control. This valve has the ability to lock in the open or closed position but not fractionally open. I believe you'd be better off with a ball valve.
Question:	Will this work on any slr 35mm film cameras
Answer:	This valve has male and female pipe threads. the threads are for plumbing lines If you need to put it in the wall, you need to purchase this item also https://www.amazon.com/dp/B077H1BWF7
Question:	how does it work? i can't seem to use it
Answer:	The same thing happened to me. I just replaced it with a different valve.

• Compatible: This soft release button for Leica M9 M10, Fuji Xpro 3 / X-Pro2 / Xpro1 / X100V / X100F / X100T / X100S / X100 / X-E3 / X-E2 / X-E1 / XT4 /XT3 / XT2 / XT1 / X30 / X20 / X10 / XT30 / X-T20, Nikon DF, Olympus Pen-F etc,
• Exquisite: The soft release button Fuji is made of pure copper. Noble and elegant, it can perfectly set off your favorite camera. Bring the ultimate shooting experience.
• Design: Knurled design, concave surface, artificial belly design principle, beautiful and comfortable fujifilm shutter button.
• Robust: Each fuji shutter button is equipped with a rubber ring for cushioning and stability.
• Easy to install: Just screw our fuji shutter button clockwise into the groove of the lensmate soft release button of the original camera and tighten it. Hope our products can bring you a more comfortable photo experience. AJART will also provide you with the highest quality products and impeccable customer service. If you have any use or other questions, please feel free to contact us.

User questions & answers

Question:	Do this fix the canon ae 1 program
Answer:	The Valterra 6101 valve is made to glue over 1-1/2" schedule 40 pipe. The outside diameter is 2.375".
Question:	Does this work with the Olympus OM
Answer:	If it is truly almost 2 inches, then you would need an adapter. My 1.5 inch pipe fit perfectly snug into the valve. Did they send you the wrong gate valve? Does it have 1.5 inch stamped on the unit?
Question:	Compatible with Olympus om-1n
Answer:	8.250 closed 10.500 open Ruff measurement
Question:	hello, when the red one will be available? thank you
Answer:	Seal type most likely.

Product features

Product Parameters:

Package Includes:

2x 11mm (Diameter) Concave Surface Shutter Release Button (Rubber O-Ring Included)

Concave Surface Diameter:

11mm. Thread size: ¼ in.

Compatible Cameras:

Leica M3 M4 M5 M6 M7 M8 M9 M10, Fuji Xpro 3 / X-Pro2 / Xpro1 / X100F / X100T / X100S / X100 / X-E3 / X-E2 / X-E1 / X-T3 / XT2 / XT1 / X30 / X20 / X10 / XT30 / X-T20, Nikon DF / FE, Olympus Pen-F etc.

Comfortable Feel

Pure copper material, CNC cut + Plating process, exquisite details and provide the best texture.

Camera Shutter Butter

Knurled design, exquisite cutting technology. It is matched with a collar to increase the fit and stability of this shutter button to the camera.

Shutter Release Button

This shutter button is a concave surface, perfect feel, and fits the arc of the finger. Perfectly fits your camera and enhances your comfort during use.

Product description

Dedicated Lens Hood with 49mm filter adapter for Fujifilm X100V X100F X100T X100S X100 X70



Fits all X100 series camera original lens cap



Note: This item only includes lens hood and filter adapter, does NOT include the camera or the lens cap.

• Compatible with Fujifilm X100V X100F X100T X100S X100 X70 camera and fits original lens cap
• 2in1: Lens hood & Lens / Filter adapter ring, both are made of anodized aluminum
• The Lens hood provides additional protection to the camera and lens, designed to minimize lens flare by deflecting stray light from entering lens
• The adapter ring facilitates the attachment of the lens hood or a 49mm thread filter for UV, CPL filters etc
• Reminder: please remove the front ring on X100V, X100F, X100T, X100S, X100, X70 before installing adapter ring.

• COMPATIBILITY: The shutter release remote control is compatible with Canon E3 socket cameras, and Samsung selected cameras. Please refer to the specific models in the Description.
• PREVENT SHAKING: Half-press for focus, full-press and B mode operation for shutter, efficiently prevent shaking and trembling.
• PLUG AND USE: It supports half-way focus, full-way shooting and bulb mode. Just turn on your camera, plug and play. Portable for outdoor shooting.
• EXTENSION CABLE: Comes with an 11.4ft 2.5mm extension cable for camera remotes for general audio applications.
• FUNCTION: The extension cable is made to accommodate those who need to remotely control a camera over a longer than normal distance.

User questions & answers

Question:	Will this work for a canon t
Answer:	No, not at this time
Question:	Does this work for video
Answer:	I really don't take warranties into account, because it will cost more to ship it back. I am guided by my needs, rather than by warranties.
Question:	Is this compatible with a Canon 50D
Answer:	There is no way to tighten the internal housing around the rod. You can replace just the valve body if necessary. It would be part number 6100PB. How old is the valve? There is a one year warranty for factory defects. You can contact me at [email protected] if you have a warranty issue.
Question:	Will this work on a canon rebel t
Answer:	My valve is before the settling tank and pump. I am using a 4000 gallon per hour pump and it does not seem to leak any air.

Product features

The extension cable is made to accommodate those who need to remotely control a camera over a longer than normal distance.

Cable Length:

- Remote control: 3.3ft / 1m

- Extension cable: 11.4ft / 3.5m



Compatibility of Remote Control:

* Canon:

- 70D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D (Rebel T5i, T4i, T3i, T2i, T1i, XSi, XTi, XT)

- 100D (Rebel SL1)

- 1200D, 1100D, 1000D (Rebel T5, T3, XS)

- G1X Mark II, G1X, G16, G15, G12, G11, G10

* Pentax:

- istD, istDS, istDS2, istDL, istDL2, K110D, K100D, K100D Super, K200D, K10D, K20D

* Samsung:

- NX10, NX5, NX20

Product description

Nikon MC-DC2 Remote Release Cord for Nikon Digital SLR Cameras

• Wired remote for Nikon D90 and D5000 digital SLR cameras
• Replicates functions of the camera's shutter button
• Offers immediate shutter release and shutter lock for long exposures

User questions & answers

Question:	Image review and info button are disabled when using this with my nikon d5500. shutter release still works. works normally in live view mode. help
Answer:	Yes, it is. It is compatible with almost all DSLR such as Canon, Nikon, Sony, Olympus, Fujifilm, Pentax and more.
Question:	Does this remote release work with the D
Answer:	Certainly. I have reversed it once and got excellent pictures.
Question:	Does this remote release have the ability to do timed shots (i.e. if I want to take 30 second exposures for a duration of 2 hours
Answer:	Brass
Question:	Does it work with D
Answer:	Made in China

Product features

About Us

Nikon is suppliers of products and solutions based on advanced opto-electronics and precision technologies.

Nikon is famous for its cameras and binoculars, but we make a whole range of other products too. For example, did you know we manufacture equipment used to fabricate the semiconductors found in your PC and smartphone? And that we make measuring instruments that detect microscopic defects in electronic components? Nikon technologies contribute to people's lives in ways you may never have imagined.

Globally, we offer a range of products, from industrial equipment for the manufacture of high-definition screens used in smart devices to the Nikon cameras beloved by generations of photographers.

• Compatible models: Nikon Df, D5600, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D90, D7000, D7100, D7200, D600, D610, D750, Coolpix P7700, P7800, Coolpix A (Before purchasing the shutter cable, please check whether your camera model is in the list of compatible camera models. After receiving the item, if you cannot find the camera's shutter release socket, please contact us)
• Shooting Mode:Single Shooting,Continuous Shooting,Long Exposure.
• Shutter Control: Half-press or Full-press
• Cable Length:120cm
• RC-201 uses advanced brushed pattern to increase the texture.

User questions & answers

Question:	how is this a "remote" if it has to be connected to the camera
Answer:	I stick a razor HD spoting scope on it and it has no problem It's a 20x60x80 heavy. Not sure of the weight though
Question:	Does anyone know if this is compatible with the d3000? i dont see it listed, but i think the camera has a dc2 port
Answer:	I can only get the level on the top-front to work. The level on the back seems to only move slightly back and forth no matter what position I put the apparatus.
Question:	Will this work on the kodak pixpro astro zoom az421 16mp digital camera if not what will
Answer:	Each tripod leg of 5C has 5 sections. Therefore the working height can actually be easily adjusted flexibly.
Question:	Will this work with my Nikon D850 I didn’t see it listed
Answer:	The 5c version does NOT come with spikes.

Product features

Stylish Appearance and Grand

The wired shutter remote control uses advanced brushed pattern to increase the texture. The control line still keep flexible even under low temperature.

Better Hand -Feel and More Accurate Shooting

Thoughtful ergonomic design, the notch at the back is ideal for most of the people's hand type.

Lock the Bulb

Support half-press, full-press, lock shutter, press the shutter button and move forwarder to lock the Bulb. Users can get a better shooting according to utilize the actual situation flexibly.

Product description

Description:

With a built in interval timer, the new premium electronic timer remote cord will help you for exact controlling exposure time. Moreover, compare with original products, new premium electronic timer remote cord can achieve all the function as original but with lower cost.

This multi-function remote cord provides an automatic timer function, you can choose the delay (time before shooting starts ),exposure time, interval, and number of shots for timed interval photography. Shutter speed can be selected with the camera if desired. It also has a manual release. Take photographs manually using the shutter-release button on the remote cord. Photographs can be taken manually even when the timer is running.

The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can also be illuminated. The remote has a stylish and ergonomic design, making it a pleasure to use. It has a super large LCD screen. The shutter release button on the remote is a two-stage button: half-pressing the button will cause the camera to focus, and full-pressing will trigger the camera's shutter.



Package Contents:

1 x Timer Remote Control for NIKON D90 D5000 D5200 D7100 D4

1 x English manual

• The timer remote is used to trigger the camera shutter with Delay shooting/Self-timer, Bulb shooting/Long exposure timer,Interval timer, Exposure count control, Remote switch function.
• Delay time and Exposure time: 0 s to 99 hrs 59 mins 59 secs in one-second increments，Interval time:1 s to 99 hrs 59 mins 59 secs in one-second increments，Shooting amount:1to 399 and unlimited，speaker on/off.
• The remote release button is pressed halfway for autofocus, and fully pressed to trigger the camera shutter.
• The remote control has an LCD screen, short press the Lighting/Lock button to light up the backlight, long press the Lighting/Lock button to lock the screen operation.
• Compatible with:Nikon D750/D780/D7500/D7200/D7100/D7000/D5600/D5500/D5300/D5200/D5100/D5000/D3300/D3200/D3100/D610/D600/D90 DSLR Cameras

User questions & answers

Question:	does this works with d
Answer:	It can be added to almost any tripod as it has the required tripod thread, BUT on the website I saw some comments that you need to be careful how you remove the clip connector (designed to place camera over a monitor) . Apparently it could break, which shouldn't stop you using the camera on the tripod, but you will not be able to reattach for use above a monitor. The weight is no issue for this tripod, even if using the horizontal arm.
Question:	Does it work with the Nikon D
Answer:	Yes, I use it with my Canon 6D and Tamron 24-70mm. It’s an amazing tripod.
Question:	I shoot with a nikon d5300. is this compatible with it? thank you
Answer:	Yes
Question:	Will this work with the Nikon
Answer:	This is a lighter duty head, most I put on it is a 100-400mm.

Product description

JJC TCR Threaded Cable Release is applicable to all cameras with a threaded shutter release button JJC TCR can closely connect threaded shutter release button for a more reliable shutter release It can quick release the shutter to avoid the image shaking and can lock and unlock the bulb for long exposure shooting Product Highlights： - Closely connecting shutter thread hole for more reliable shooting - Quick release the shutter to avoid the image shaking - Bulb locking and unlocking design for long exposures shooting

• For any camera features a Threaded shutter release button
• Vibration-free shutter release
• Bulb-lock design for long exposures
• Length: 70cm; Net weight: 36. 5G
• Material: rubber+ aluminum+ Copper

User questions & answers

Question:	Would it work with a Minolta x
Answer:	I don't know if an extension is available. You could easily make your own if you have a smattering of electronic knowledge and a voltmeter.
Question:	Does this work for a pentax k
Answer:	please go for the "for canon c2".
Question:	How do you remove the long part sticking out so that it's just the threaded part that screws into the camera
Answer:	Hmm. You would have to search additional devices to add to a tripod.
Question:	Will this work with a Holga
Answer:	Yes

Product description

Features:

This camera remote control shutter release cable is designed for Nikon DSLR cameras.

It helps you to build connection between your Nikon DSLR camera and your flash trigger.

Allows flash trigger to control the camera to focus as well as release shutter.

Capable of eliminating vibration while shooting pictures.

Sterchable and lightweight design makes it convenient to carry and use.



Specifications:

Color: Black

Compatible with: Nikon D90/D5000/D7000/D3100/D5100 DSLR Cameras



Package Contents:

1x Shutter Release Cable for Nikon

• This camera remote control shutter release cable is designed for Nikon DSLR cameras.
• It helps you to build connection between your Nikon DSLR camera and your flash trigger.
• Allows flash trigger to control the camera to focus as well as release shutter.
• Capable of eliminating vibration while shooting pictures.
• Sterchable and lightweight design makes it convenient to carry and use.

User questions & answers

Question:	What cable works for Nikon
Answer:	Look at the shutter button on your film camera. If there is a hole in it with threads on top, then yes, it will work. There is only one size made so you don't have to worry about buying the wrong size.
Question:	Does this work with Nikon Z
Answer:	Djorgi,At first mine didn't seem to work. On the top, near the push rod there is a knurled knob. It should spring up and down when pushed on. Hold the black 'T' shaped finger holds and turn the knob. It will lock the push cable when it one direction and allow the cable to move up and down in the other. Just play with this knurled knob until the plunger works the way you want it to. Then screw the other end into your cameras shutter release button. I assume it has a threaded hole in middle. Good luck, and let me know if it still doesn't work. If you can't make it work, maybe something is wrong with the knurled knob, I am talking about the knurled knob on the push button end of rod, not the little knurl knob you use to hold and thread the screw into shutter release button on camera.Terry
Question:	Does it work with a Nikon D
Answer:	It works with 77D, just plug to the camera's remote socket, not the place on the battery grip.
Question:	What is the approximate length of this cable coiled and stretched
Answer:	this camera is not listed in the description, and thats an older camera too...i do not believe it will work

Product description

This intervalometer provides photographers with enhanced levels of exposure control. Featuring specialized functionality such as continuous shooting, self-timer, long time exposures, and interval shooting, it allows you to set timer delays, exposure times and intervals up to 99 hours, 59 minutes, 59 seconds in one-second increments. You can also select from 1 to 399 continuous shots or set the device to take an unlimited number of photos.



It is great for time lapse series of blooming flowers, sunsets or the night sky. It can also function without batteries as a simple manual remote shutter release. Simply establish the camera's settings and push the remote's shutter button halfway to focus and fully to shoot. In bulb mode, slide the shutter release button up to lock and the shutter will stay open until you release it.



Q: I need 50 pictures, the exposure time for each picture is 10s, and the interval time between each picture is 5s, how set?

A: (Camera in Bulb mode) Set the "BU" to 10s and "INT" to 15s, then set the "N" to 50 and press the "start" button.



Why the "INT" needs to be set 15s instead of 5s as you wanted the interval to be 5s, as in the default programs of this remote, the interval time includes the exposure time. So the 15s of "INT" minus the 10s of "BU" results in 5s real interval time between each picture.

Compatible with Canon EOS cameras:

EOS Rebel T7,T6,T5,T3,T8i,T7i,T7i,T6s,T6i,T5i,T4i,T3i,T2i,T1i,Rebel XSi,XS,XTi,Rebel SL1,SL2,SL3

EOS 2000D,90D,80D,70D,77D,60Da,EOS R,R6,RP,M5,M6,M6 Mark II,etc.



Compatible with Canon Powershot cameras:

Powershot G16,G15,G12,G1X,G1X Mark II, G1X Mark III,etc.



Compatible with Pentax cameras:

K30,K50,K1,K3,K3 II,K5,K5 II,K5 IIs,K7,K100D,K100D Super,K10D,K110D,K200D,K20D,K500,645D,645Z

• Compact Size:12.1*4.0*2.1cm, 90cm long wired remote controller, powered by 2 AAA Alkaline batteries
• Self-timer, interval timer, long-exposure timer and exposure-count setting features
• Take Photos without Camera Shake and great for Time-Lapse Photography
• The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec
• Humanized backlight design allows you to view the LCD screen in the dark

User questions & answers

Question:	Will this work with a Nikon 1 J
Answer:	Thank you for your inquiry, our camera button is very suitable for Olympus om-1n series cameras, you can be assured to buy :)
Question:	Does this work with the Sony RX10 iv
Answer:	Hello! The red camera shutter button is on the way to restock, and it will be available for sale in the next week. Thank you for waiting.
Question:	will it work on canon xt
Answer:	It should. Google some images and look for the graduated-helix that will accept the cable-release. I don't know the Rollei first-hand, but know it to be of very good quality, and being 'old school' should have the helix in the center of the shutter-release...Have fun!
Question:	Will it work on canon rebel t
Answer:	It works with a minolta srt101

Product description

Introduction: VILTROX remote shutter release jy-120 can be used to operate the camera remotely by wireless control to reduce camera shake and increase the sharpness of the images. Strong interference-resistance capacity and exhausted power consumption design benefits a longer period of use. The frequency is 2.4mhz and receiver uses AAA battery. Specification: Working frequency: 2449.86mhz transmitter battery: AAA 1.5v x1 receiver battery: AAA 1.5v x2 transmitter size: 85x26x16 mm receiver size: 60x47x35 mm battery life: Support to launch 1000 times within the normal range transmitting distance: Approx.100 meters package content: Transmitter x 1 receiver x 1 cable x 1 suitable for: Canon EOS 1100d 1000d 650d 600d 550d 500d 450d 400d 350d 300d 60d 60da 70d 700d 100d 1200d.

• Wirelessly Trigger Your Camera's Shutter
• Working Distance of 100 Meters.Energy Saving Design, Long Working Hour
• Wireless shutter remote control with a single shot, time-lapse photography and Bulb function.
• Operating frequency of transmitter:2.4MHZ.
• You can switch to a different type of shutter cable as follows to control different camera models of different brands.

User questions & answers

Question:	RF or IR ? Is 100 meter range (best case) correct? Does it require a clear line of sight/pointed at camera or can the transmitter be hidden
Answer:	I don't see why not.
Question:	Has anyone used this with a canon t3, not the t3i, just the standard t
Answer:	Yes! I have a Canon EOS Rebel T6/1300D and it works perfectly. It also has the 1/2 shutter release feature so that you can partially depress the shutter release to set the focus. I absolutely love this and use it frequently. Hope this helps.
Question:	would it work to OM10 olypus camera
Answer:	Thank you for your inquiry. We have examined the parameters carefully. Our camera shutter button is very suitable for Canon ae1 camera, please feel free to purchase.
Question:	Can the product focus the camera with a half press of the button as one would normally do with the shutter button on-camera
Answer:	Hello, this camera shutter button is very suitable for Olympus's classic model om-10, please feel free to buy

Product description

BR-E1A Wireless Remote shutter release enables the camera operations to be performed wirelessly, including shooting still photos and videos, focusing with AF and zooming.

The feature of zooming only works when using with the power zoom adapter (sold separately).

How to setting your camera and remote:

Taking photo:

For remote control: press the remote control to shutter release photo position.

For camera:setting the camera to Non-recording mode - drive mode to remote control.

Start/Stop video recording:

For remote control:press the remote control to recording position.

For camera:setting video mode - The drive mode is adjusted to the REMOTE CONTROL - The remote control should be enabled (the camera only sees this option when the remote control to there cording position)

Specification

Operating distance: Approx. 10m/32.8ft

Power: Lithium button cell battery CR2032

Dimension: 91.5 x 27 x 13mm (3.6 x 1.1 x 0.5 in.)

Weight: 13g (without battery)

 Package include

1 * For Canon wireless remote control BR-E1A

1 * Lanyard sling

1 * Instruction manual

• Compatible Models – This Camera Release JUST COMPATIBLE WITH EOR RP, EOS R, R5, R6, 6D Mark II, 77D, 800D(EOS Rebel T7i), 200D(EOS Rebel SL2), 250D(EOS Rebel SL3), M50, PowerShot SX70 HS, 90D, M6 Mark II, PowerShot G7 X Mark III, PowerShot G5 X Mark II.
• Easy To Use – You can use this shutter release to shooting still photos and videos, can achieve take selfies, group shots and avoiding camera shake that can be caused by manually pressing the shutter.
• Long Distance – This BR-E1A remote can operating range up to 10m/32.8ft, not controlled by line length and direction.
• PZ-E1 Power Zoom Adapter - Compatible with the PZ-E1 power zoom adapter (NOT INCLUDE) and movement of the EF-S 18-135mm f/3.5-5.6 IS USM lens.
• Pls Notice that when you pairing it pls make sure your camera drive mode to remote mode and setting it to to "self-timer:10sec/remote".

User questions & answers

Question:	Can this work with a canon eso 4000d
Answer:	Antonio is correct. The remote will simply trip the shutter. What you described is a remote release that’s called an intervalometer.
Question:	Can this work with a canon eso M
Answer:	I own a Nikon D600, and I can vouch for the fact that it works with that camera.
Question:	How do I pair it with canon g7x mark iii
Answer:	Is you camera a Canon? Does it have "The shutter release remote control is compatible with Canon E3 socket cameras" If you Canon has an E3 socket (read your instruction book to find out). This item works with my Pentax K-50 which has a similar socket. I am not familiar with a Canon model T7. From T7 specifications "Extension System Terminal: Remote Switch RS-60E3 Terminal." Based on my gogle search it looks like it will work with a Canon T7
Question:	Can this work without Wi-Fi anywhere
Answer:	It will start and stop the video just as if you were using the shutter button taking a picture. one press to start recording and one to stop, at least on my canon camera that is.

Product description

Features:

Camera remote control shuttle release cable for Nikon;

Stretchable spiral coiled cord, easy to use and carry;

Applicable Model: Nikon D800 D700 D300 D300S D4 D3S D3X D3 D200 N90S F5 F6 F100 F90 F90X D4S;

Cable Length (Not Stretched): 11.8" / 30 cm;

Connectors: 2.5mm Plug to N1 10 Pin Plug.

Package Contents:

1x Off Camera Remote Shutter Release Cable

• Camera remote control shuttle release cable for Nikon;
• Stretchable spiral coiled cord, easy to use and carry;
• Applicable Model: Nikon D8 D7 D3 D3S D4 D3S D3X D3 D2 N9S F5 F6 F1 F9 F9X D4S;
• Cable Length (Not Stretched): 11.8" / 3 cm;
• Connectors: 2.5mm Plug to N1 1 Pin Plug.

User questions & answers

Question:	Will this work on my d300 or do I need an a3.5 adapter
Answer:	This piece does not fit the nikon d850. I just received my and it does not fit. I should have done more research but I saw your comments and I ordered. The nikon d850 uses a 10 pin connector and this is not
Question:	Will this fit a Nikon D
Answer:	Works fine with my D3300! I do not know the D5500.
Question:	Will this work with a Pentax K
Answer:	http://www.nikonusa.com/en/Nikon-Products/Product/Remote-Cords/25395/MC-DC2-Remote-Release-Cord-(1-meter).html#tab-ProductDetail-ProductTabs-CompatibleWith