10 best power adapter for canons

Product description

Our ACK-E6 replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your TV or VCR. It is compatible with the following Canon DSLR cameras:



EOS 5DS, 5DS R, 5D Mark II, 5D Mark III, 5D Mark IV, 60D, 60Da, 6D, 6D Mark II, 70D, 7D, 7D Mark II / 7D Mark 2, 80D,EOS R DSLR Cameras

DISCLAIMER: This product works with Canon EOS 5DS, 5DS R, 5D Mark II, 5D Mark III, 5D Mark IV cameras which use battery LP-E6. But it is NOT compatible with Canon EOS 5D which is an entirely different camera model and use different battery BP-511. Please check your camera model before placing your order.

• Worldwide Input Voltage: AC 100~240V 1.5A 50~60Hz
• Output: DC 8.0V/3A 24.0W
• Made of high quality plastic, copper wire and metal materials, compact design, 1-Year Warranty, CE and China CCC certified
• DR-E6 DC Connector (coupler) and Power Cord (length:1.5M) Included. DISCLAIMER: This product is for Canon EOS 5DS, 5DS R, 5D Mark II, 5D Mark III, 5D Mark IV which use battery LP-E6. But this product is NOT compatible with EOS 5D which use different battery BP-511.
• This kit allows you to power your camera from an AC outlet. Useful for lengthy studio shoots with no need to continuously replace and recharge multiple batteries

User questions & answers

Question:	Has anyone tried this with the R5 yet? Price is appealing but not sure I want to risk it with such an expensive camera
Answer:	That not a question, but I'll turn it into one and try and answer that question that I just wrote. "Why do I get a humming noise when I plug my planet waves adaptor into a mini twin fender amp?"First off, does your mini twin work with a nine volt battery? Check that. If not, then the amp's broken. If yes, continue. I just checked, and the mini twin seems to be center negative, like the adaptor. Still, check to see if your mini-twin power in is expecting a center negative power supply.Perhaps the power supply input jack on the mini twin is broken?Perhaps you've gotten three bad power supplies. Have you checked them with a multimeter?Good Luck.
Question:	The battery pictured is not the lp-e6 battery which has two contacts close together on the same side of the battery center line. what gives
Answer:	They've updated the product at least once now, it seems. I have three I've bought from Amazon with 2013 copyright logos on the bottom, that have "Regulated" printed above the large "ADAPTOR" verbiage, have a 300mA rating, and are a larger cube shape and are much heavier. The revised version drops the 'regulated' verbiage on the box front, has a 2018 copyright, has a 500mA rating, is a rectangular shape like in the current Amazon photo as of 2020, and is MUCH lighter in weight. Both have the exact same model number PW-CT-9V, and UPC code 0 19954 95097 2.
Question:	Does this work with the eos 80d
Answer:	It is not attached when shipped. I must be screwed in place, So, unscrew it and remove. The screw even has a flip up wire making like a wing-nut to make this easier.
Question:	What does "fully decoded smart chip" mean
Answer:	Yes

Product description

ACK-E8 AC POWER ADAPTER KIT



This kit achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer,for extended work in a studio, or while viewing images while connected to your TV or VCR.



Compatible with the following Canon camera models:

Canon EOS Rebel T2i,

Canon EOS Rebel T3i,

Canon EOS Rebel T4i,

Canon EOS Rebel T5i,

Canon EOS 550D,

Canon EOS 600D,

Canon EOS 650D,

Canon EOS 700D,

Canon EOS Kiss X4,

Canon EOS Kiss X5,

Canon EOS Kiss X6.



NOTE: This ACK-E8 power supply works with Canon T3i and T5i cameras, but it is NOT compatible with Canon T3 or T5, which are entirely different camera models. Please check your camera model before placing your order.



Product Specification:

Power: 14.8W

Input: 100V-240V ; Output: DC 7.4V/2A



Package List:

1 x ACK-E8 AC Adapter,

1 x US Plug AC Cord,

1 x DR-E8 DC coupler.



Good to Know:

100% Compatible with Original AC Power Adapter Kit, CE and FCC certified.

• COMPATIBLE: 100% Compatible with Canon Original AC Power Supply Kit, Suitable for Canon EOS Rebel T2i, T3i, T4i, T5i, 550D, 600D, 650D, 700D, Kiss X4, Kiss X5, Kiss X6 Cameras. ( IMPORTANT TIPS: NOT fit for Canon T3 and T5 cameras).
• ADVANTAGE: This kit can continuously power the camera ,Whether it is using the camera for a long time to shoot video, or live webcast, or record the growth of plants etc. You no longer need to worry about running out of the camera battery, it can help you record every wonderful moment continuously, It is an essential tool in our lives.
• MULTIPLE PROTECTIONS: overcharge protection, short circuit protection, high temperature protection, surge protection. and use ABS flame retardant material.
• ATTENTION: The DR-E8 dummy battery can’t use alone, need equip this kit’s ack-e8 AC to DC adapter so that works well with camera.
• PACKING LIST: ACK-E8 AC power adapter*1, DR-E8 DC connector (coupler)*1, us ac power cord *1. Support 24 months warranty.

User questions & answers

Question:	Will this battery work with my Canon XTi
Answer:	Yes
Question:	Will it work for canon 80d
Answer:	Unfortunately it won’t work vertically.
Question:	Does anyone know the size of the plug to the dc coupler? Instead of been ac power I want to power it with a 9v power bank
Answer:	Yep and the swivel base it has let's it sit on a tabletop and aim nicely or on a shelf pointing down -- it also hooks over the top of a monitor or laptop and you have good angle control...
Question:	What does description mean-'attention: the dc coupler can’t use alone, need equip this kit’s ac/dc adapter so that works well works well with camera
Answer:	The lip that grabs the top of a curved monitor is only 1" wide... so I'd say, no problem. The back of monitor foot that angles the camera, could care less about the curve. Hope that helps
Question:	it says it comes with a lithium ion battery. Can you just plug it into your PC though? or is it battery operated only
Answer:	It's USB
Question:	is tripod included
Answer:	No this is a camera and microphone only. You will need to have a way to play the sound. Some computers have built in speakers.
Question:	Is this compatible with windows
Answer:	922
Question:	would it work clipped vertically on tv screen
Answer:	Tripod is small but works well. the camera stopped working just as the warranty ended

• [COMPATIBLE MODEL:] The DR-E18 dummy battery Replacement for Canon LP-E17 Battery and LC-E17 LC-E17E Charger, suit for Canon EOS Rebel T6i, T6s, T7i, T8i, SL2, SL3, EOS 750D, EOS 760D, EOS 800D, EOS 200D, EOS 200D II, EOS 250D, EOS 8000D, EOS 77D, EOS RP, EOS Kiss X8i, Kiss X9i, Kiss X10i, Kiss X10, Kiss X9, 9000D Cameras. NOTE: NOT FIT for Canon EOS M3 M5 M6.
• [FUNCTION:]This ACK-E18 power supply kit is a tool designed for long-term studio shooting. When you need to take photos or videos continuously, you don't worry about the sudden power failure of the camera. It saves you time and greatly improves work efficiency. It is a good choice for studio photographers or photography enthusiasts.
• [STEPS FOR USAGE:] Remove the original battery, Replace with virtual battery, and cover the battery compartment cover, Connect the adapter, Connect the power outlet. Warm Tips: Please must to be close the battery compartment door, otherwise the camera cannot be started.
• [SPECIFICATION:] FCC CE ETL ROHS and more Certification. Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires explosions or shocks occurring. Input:100~240Vac,1.5A max 50~60Hz, Output: DC 8V/3A, Rated Power: 24W.
• [NOTE:] This DR-E18 DC Coupler’s can implement original all functions. But the DC Coupler can’t use alone, you need equip this kit’s AC/DC Adapter so that start your cameras. 18 Months Warranty and Easy-to-Get customer service.

User questions & answers

Question:	will this product work for the canon s
Answer:	DC coupler plug size is 3.0 * 1.1 mm.
Question:	Does this product work for the canon rebel xt
Answer:	As I cant be certain, my guess is he means that you cant just plug the power cord into the camera without inserting the battery shaped adapter into the battery compartment with the plug inserted into it to use. Also note, you will need to put the battery cover back on the camera also to use this or it wont work.
Question:	Will this work with the 90D
Answer:	You just plug it into your PC
Question:	I just bought this for my canon t6i and it does not work. i plugged it right in like i'd put in my regular charger. what am i doing wrong
Answer:	Yes, a mini tripod was in the box.

Product features

ACK-E18 AC POWER SUPPLY KIT

Power Supply Description:

Achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your PC, TV or VCR. This device will provide constant power to your camera (It will not charge batteries) You MUST make sure the Battery door cover is fully closed in order for this device to work.

Compatible with the following canon eos camera models:

• Canon EOS Rebel 750D, 760D, 800D, 77D,

• Canon EOS Rebel T6i, T6s, T7i, T8i, SL2, SL3,

• Canon EOS Rebel 850D 200D 250D,

• Canon EOS EOS Kiss X8i,

• Canon EOS 8000D, EOS RP and more Canon Digital SLR Cameras.

Warm tips: This product works with Canon T6i and T6s cameras ONLY. It is NOT compatible with Canon T6.

Safe Switching Adapter:

• Safety certificate: CE FCC ETL ROHS and more Certification.
• Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires explosions or shocks occurring.

Product Specification:

• Rated Power: 24W
• Input: 100V-240Vac 0.18~0.35A 50-60Hz;
• Output: DC 8V/3.0A.
• Color: Black

Package List:

• 1 x ACK-E18 AC Power Adapter Charger(Also applies to ACK-E6 AC Adapter)
• 1 x US Plug AC Cord
• 1 x DR-E18 DC coupler

Product description

This ACK-E6 Power Supply Kit achieve Replacement designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your TV or VCR.



It is compatible with the following Canon camera models:

Canon EOS R, EOS R5, EOS R6,

Canon EOS 5DS, EOS 5DS R,

Canon EOS 5D Mark II, EOS 5D Mark III, EOS 5D Mark IV,

Canon EOS 6D, EOS 6D Mark II,

Canon EOS 7D, EOS 7D Mark II,

Canon EOS 60D,

Canon EOS 70D,

Canon EOS 80D,

Canon EOS 90D Cameras.



Product Specification :

Power: 24W

Input: 100V-240V ; Output: DC 8V/3A



Package List:

1 x AC-E6 AC Adapter

1 x US AC Cord

1 x DR-E6 DC Coupler



Good to Know : 100% Compatible with original Canon AC Adapter Kit ACK-E6, UL CE and FCC certified

Best to lock the battery cover during the using



Warranty & Support: 18 Months Warranty and Provide Friendly, Easy-to-Reach Support

Gonine :Your support is our best motivation

We are a professional power supply manufacturer and always committed to providing high-quality products and Cost-effective price. Wish our products can get your approval and support

So if for any reason you are unhappy with any product by Gonine, please do not hesitate to contact we. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!

• Compatible with Camera Models: for Canon EOS R, EOS R5, EOS R6, EOS 90D, EOS 80D, EOS 70D, EOS 60D, EOS 6D, EOS 6D Mark ii, EOS 7D, EOS 7D Mark II, EOS 5DS, EOS 5DS R, EOS 5D Mark II, EOS 5D Mark III, EOS 5D Mark IV Cameras.
• ADVANTAGE: The ACK-E6 AC Power Supply Adapter Kit replace the Canon LP-E6 LP-E6N Battery and LC-E6 LC-E6E Battery Charger, It can power your camera continuously from the AC outlet through the power adapter. exactly implement for lengthy studio shoots with no need to continuously replace and recharge battery.
• Parameter & Safety Guarantee: Input:100~240Vac ,1.5A Max 50/60Hz, Output: DC 8V/3A 24W; UL CE FCC ROHS safety certification Approved. Anti-interference Magnetic Ring to avoid EMI (Electromagnetic Interference) / Short Circuit & Over Voltage & Current Protection / Low Fever / No Noise.
• Kit includes: a US AC Cord to plug into the outlet, a DR-E6 DC Coupler, an ACK-E6 AC Adapter to connect the US AC wire and DR-E6 dummy battery.
• VERY IMPORTANT:The DR-E6 DC Coupler can’t use alone, need equip this kit’s AC/DC adapter so that works well with camera(Notice: please make sure the battery cover is FULL closed before using camera). Warm trips: If you want to USB-C ACK-E6 adapter, please search for ASIN: B08GPC2FKB.

User questions & answers

Question:	Do I have to use this plugged in? Or can I use it as a normal battery also
Answer:	I don't know for sure, but this is a pretty generic design, so chances are good that it probably will. The width between the arms that support the keyboard is adjustable, just make sure the width of the keyboard (the short end that points the same way the keys lie) isn't bigger than the stand is or you could knock it off when playing.
Question:	Does this adapter work with the new Canon 90D
Answer:	Yes. My full size keyboard fits on there. It’s pretty sturdy.
Question:	Will this work with a Eos R
Answer:	Surprisingly, no. Because you sit in front of the keyboard, your knees miss the x-poles.
Question:	My 6d won’t power on if the battery door is open. What’s the solution here
Answer:	A 21" keyboard will be a tight fit. You'd need to set the stand to one of its higher levels (more suited for playing while standing than while sitting) for the struts to be close enough for a secure hold, unless the synth has places to fasten securing straps.

Product features

ACK-E6 AC Power Adapter kit

• This kit Convenient for lengthy studio shoot and when you are downloading, processing or viewing photos or videos, when connected to your PC, TV or VCR, no need to continuously replace and recharge multiple batteries, charging for your camera.

It is Compatible with the Following Canon Camera Models:

• Canon EOS R, EOS R5, EOS R6,
• Canon EOS 5DS, EOS 5DS R,
• Canon EOS 5D Mark II, EOS 5D Mark III, EOS 5D Mark IV,
• Canon EOS 6D, EOS 6D Mark II,
• Canon EOS 7D, EOS 7D Mark II,
• Canon EOS 60D,
• Canon EOS 70D,
• Canon EOS 80D,
• Canon EOS 90D Cameras.

High Quality & Safety :

• Anti-interference Magnetic Ring to avoid EMI (Electromagnetic Interference)
• Short Circuit & Over Voltage & Current Protection
• Low Fever and No Noise.

Product Specification :

• Power: 24W
• Input: 100V-240V
• Output: DC 8V/3A

Package List:

• 1 x AC-E6 AC Adapter
• 1 x US AC Power Cord
• 1 x DR-E6 DC Coupler

• [COMPATIBLE WITH MODEL:] CA-PS700 external power adapter and DR-E12 DC coupler (Connector) replace LP-E12 Battery and LC-E12 Charger, work for Canon EOS M50, M10, M2, M, M100, M200, Kiss M Mirrorless Digital Cameras, equip with ACK-E12 AC / DC power adapters, continuously charge for your camera.
• [STEPS FOR USAGE:]First Remove the Canon original LP-E12 battery, Replace with TKDY DR-E12 virtual battery, and cover the battery compartment cover, Connect the adapter, Connect the power outlet. NOTE: The battery compartment cover has an interface for connecting the adapter, You must lift the rubber flap covering the hole and plug the adapter through it. (The operating procedure instructions are enclosed in the box.)
• [Advantages:] It is a tool designed for long-term studio shooting. When you need to take photos or videos continuously, you don't have to worry about the sudden power failure of the camera. It saves you time and greatly improves work efficiency. It is a good choice for studio photographers or photography enthusiasts.
• [PRODUCT SPECIFICATION:] Power: 14.8W, Input: 100V-240Vac 1.5A max 50/60Hz ; Output: DC 7.4V/2A.

User questions & answers

Question:	Is this compatible with canon m6 mark ii
Answer:	No, the camera must use a DR-E12 battery.
Question:	Will this work for Canon M50 Mark
Answer:	If the battery is the same size... it should work. It worked perfectly for my video recording project. However, there is th a 30 minute timeout feature in the M50 that you need to work around. Canan has released a free canon utility software on their website that will bypass this feature. Hope this helps
Question:	Does this work on a M
Answer:	Dear customer, the ack-e12 suit for canon eos m200 camera. thanks!
Question:	Does the product come with the virtual battery
Answer:	The ack-e12 adapter kit include dummy battery. NOTE: After placing the virtual battery in the battery compartment, be sure to close the battery compartment cover, otherwise the camera cannot be started.

Product features

Safe Switching Adapter:

• Safety certificate: CE FCC ROHS and more Certification.
• Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires explosions or shocks occurring.

Product Specification:

• Rated Power: 14.8W
• Input: 100V-240Vac 0.18~0.35A 50-60Hz;
• Output: DC 7.4V/2.0A.
• Color: Black

Package List:

• 1 x CA-PS700 AC Adapter
• 1 x US AC Power Cord
• 1 x DR-E12 DC Coupler
• 1 x User Guide

Product description

The battery cover must be closed！！！

The battery cover must be closed！！！

The battery cover must be closed！！！

USB cable Features:

Input:5V 2-4A

Output:8.4V 2A

Conversion efficiency:92%  (DC-DC Efficient conversion rate)

USB plug Specifications:USB2.0

length:120cm

USB power adapter Features:

Input voltage: AC 100V-240V 50-60Hz

Output:5V 3A

Replace the camera battery handle grip or carry more batteries,camera insert battery grip  will too heavy,is not conducive to taking pictures.

Package :

1 x USB drive cable ACK-E12

1 x DC Coupler DR-E12

1 x 15W adapter

Suitable For:

For Canon EOS M  

For Canon EOS M2

For Canon EOS M10

For Canon EOS M100

For Canon EOS M50

note:

1.In order to make your camera work better,please use a high-quality mobile power, mobile power bank is output guarantee of at 5V 2 AMP to 4 AMP current. When the power is not enough, will not start or can not shoot properly, Please select a larger current of at least 2.4A, DC 3 Amps or more is better.

2.Do not use the computer USB supply for the camera,because most computer USB 2.0 output voltage is 5V,But the current is less than 500mA.

3. Some mobile phone / tablet usb charger with identification resistance, can not identify the camera, the current can not meet the requirements, it is not recommended.

When you want to long time shooting outside without AC outlet, then you'll feel it's not convenient. Also you can use with a DC 8.4V power bank, but it's not easy to find a DC 8.4V mobile  power bank. 

So we provide this solution, with our coupler and customized USB cable built-in intellgent circuit board(improve DC output from 5V to approx 8.7V),Applicable to most mobile power.

Warranty:12 months

• ★ Usb power+usb dc drive cable for indoor long time photography,Mobile power bank+ usb dc drive cable  for outdoor long time photography
• ★ DC drive cable can not only play the role of power adapter,while also serving to effectively suppress harmonic current noise.High-quality chips,DC-DC converter,high conversion efficiency.Good stability,can output high current,quiescent current is small.
• ★ DC drive cable connected power bank supply for digital cameras, power bank capacity: 8000-30000mAh, equal to the new battery in the camera's power many times;When you turn on the flash to take pictures or video, to provide uninterrupted power supply.The greater the power capacity, the longer the use of time.
• ★ Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera,Support part 9 v digital products,Magnetic ring anti-jamming design,enhance the stability of the camera work.
• ★ Built-in IC program, can play the role of overload protection, please rest assured that use. usb port power adapter,So widely used.15w usb charger fits Devices that meet the 5V DC voltage input

User questions & answers

Question:	Does this gadget provides constant voltage and current? Or does it vary
Answer:	Hello vary Depending on the load
Question:	Will it work for the canon rebel SL
Answer:	Assuming your SL3 uses the LP-E17 battery, no it will not work. The dummy battery that comes with this unit fits cameras that use the LP-E12 battery. Find one that has the correct dummy batter for your camera. FYI, I also purchased this one, https://www.amazon.com/gp/product/B08655M6TC/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1, for my M50. I prefer it because the connector plugs straight into the camera, not anfled, and I can easliy power fron a USB wall charger or battery pack. Be advised that many cameras will not workwith less than a 2-amp 5V source, so the cheap battery packs do not work with this. Go with Anker or equivalent battery packs and USB chargers.
Question:	What size is the DC port
Answer:	3.0*1.1 mm
Question:	Will this setup allow the battery "door" to shut while the dummy battery is installed
Answer:	Yes, the Canan M50 has a rubber flap/plug in the battery door for the power cord to connect to the dummy battery with the door closed and locked.

Product description

Smartpow is a new brand that aims to offer customers with good quality,proper price and best after-sale service. For any questions, you can contact us freely, we will resolve your problems at the first time!





Smartpow Products information:



AC Adapter: ACK-E18



Features:

Rated Power: 24W

Output:8V,3A

Input:100-240V AC



Compatible with the Following Canon Camera Models:

Canon EOS Rebel T6i T6s T7i SL2,

Canon EOS Rebel 750D 760D 800D 77D 200D,

Canon EOS Rebel Kiss X8i,

Canon EOS RP DSLR Cameras.



Package comes：

1 x DC Coupler DR-E18

1 x Adapter

1 x High quality Power cord

• FUNCTIONS: This AC Power Adapter ACK-E18 can offer continous power to your camera, you never need to charge the batteries when you taking long time shooting,downloading and viewing videos, pictures.It cannot charge the battery.
• COMPATIBLE MODELS: Replace LP-E17 battery and 100% compatible with Canon EOS 750D 760D 800D 77D 200D 250D Rebel T6i T7i T6s SL2 SL3 Kiss 8000D X8i DSLR Cameras. Not compatible with Canon t6/1300D, T7, M3, M5, M6.
• SPECIFICATIONS:Power input: 100-240 Volts 50-60Hz, Power Output: DC 8v ~ 3A
• WARM TIPS: Please DO close and lock the battery cover completely before shooting.Our charging adapter kit not used for t6/1300D, T7, M3, M5, M6. Please choose it for the right model.
• HOW TO USE: Put the DC coupler in the battery compartment and make sure the lid closed and locked, then connect the DC coupler with the power adapter and power outlet.

Product description

ACK-E10 AC Power Adapter Kit

This Power Supply kit achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your PC ,TV or VCR.



This device will provide constant power to your camera (It will not charge batteries) You MUST make sure the Battery door cover is fully closed in order for this device to work.



NOTE: DC Coupler’s can implement original all functions.But our DC Coupler can’t use alone,you need equip this kit’s AC/DC Adapter so that Works well with your cameras.



Compatible with the following canon camera models:

Canon EOS Rebel T3,

Canon EOS Rebel T5,

Canon EOS Rebel T6,

Canon EOS Rebel T7,

Canon EOS Kiss X50,

Canon EOS Kiss X70,

Canon EOS 1100D,

Canon EOS 1200D,

Canon EOS 1300D,

Canon EOS 1500D.

Canon EOS 2000D.



Disclaimer: This product is suitable for Canon T3 and T5 camera, but not compatible with the camera model different Canon T3i or T5i. Please check your camera model before placing an order.



Product Specification :

Rated Power: 14.8W

Input: 100V-240Vac 1.5A max 50-60Hz; Output: DC 7.4V/2A



Safety Certificate：

CE ,FCC ,UL,CCC and etc certified



Package List:

1 x ACK-E10 AC Adapter

1 x US AC Cord

1 x DR-E10 dummy battery.



Warranty & After-sales service:

-- 18 Months Warranty and Easy-to-Get customer service .

-- If you have any questions about our products, please contact us promptly, we will speed for you to solve.Thanks!

• [COMPATIBLE WITH:] This ACK-E10 ac adapter kit 100% Compatible with Canon EOS Rebel T3, T5, T6,T7, Kiss X50, Kiss X70, Kiss X80, Kiss X90, EOS 1100D, EOS 1200D, EOS 1300D, EOS 1500D, EOS 2000D Cameras and Canon LP-E10 Battery. ( NOT WORK with Canon EOS Rebel T3i, T5i, T6i, M ).
• [STEPS FOR USAGE:] Remove the original battery, Replace with virtual battery, and cover the battery compartment cover, Connect the adapter, Connect the power outlet. Warm Tips: Please must to be close the battery compartment door, otherwise the camera cannot be started.
• [Advantages:] It is a tool designed for long-term studio shooting. When you need to take photos or videos continuously, you don't have to worry about the sudden power failure of the camera. It saves you time and greatly improves work efficiency. It is a good choice for studio photographers or photography enthusiasts.
• [PRODUCT SPECIFICATION:] Power: 14.8W, Input: 100V-240Vac 1.5Amax 50/60Hz; Output: DC 7.4V/2A.

User questions & answers

Question:	I have a 1300d. if i get the adapter for the 1300d, will i need an outlet adapter as well for a u.s. outlet
Answer:	When you press Program first I think is Program change the second press is midi channel. Move the rotary knob to select the midi channel. Again one press is program change the second press midi channel or inverse, don't remember exactly
Question:	Does this work for the rebel XT
Answer:	No, but it should come with USB cable that will power the keyboard when plug it to your computer. You could also use the USB cable and connect it to a USB female to AC connector and that will also power.
Question:	How long is the cord
Answer:	Almost all of these kind of controller doesn't come with power cord as the main purpose is to power from the computer with USB cable, but you can connect the usb cable to a cell charger to use the Midi out function.
Question:	What size is the DC plug that fits into the dummy battery
Answer:	Yes, you just need a USB wall charger.

Product features

ACK-E10 AC Power Adapter Kit

• This Power Supply kit achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your PC ,TV or VCR.

• This device will provide constant power to your camera (It will not charge batteries) You MUST make sure the Battery door cover is fully closed in order for this device to work.

• NOTE: DC Coupler’s can implement original all functions.But our DC Coupler can’t use alone,you need equip this kit’s AC/DC Adapter so that Works well with your cameras.

Safe Switching Adapter:

• Safety certificate: CE FCC ROHS and more Certification.
• Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires explosions or shocks occurring.

Product Specification:

• Rated Power: 14.8W
• Input: 100V-240Vac 1.5A max 50-60Hz;
• Output: DC 7.4V/2A

Package List:

• 1 x ACK-E10 AC Adapter
• 1 x US AC Cord
• 1 x DR-E10 DC Coupler.

Product description

ACK-E8 AC POWER ADAPTER CHARGER KIT

This kit achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your PC ,TV or VCR.

This device will provide constant power to your camera (It will not charge batteries) You MUST make sure the Battery door cover is fully closed in order for this device to work.



NOTE: DC Coupler’s can implement original all functions.But our DC Coupler can’t use alone,you need equip this kit’s AC/DC Adapter so that Works well with your cameras.



Compatible with the following canon camera models:

Canon EOS Rebel T5i T4i T3i T2i,

Canon EOS Rebel Kiss X6 Kiss X5 Kiss X4,

Canon EOS Rebel 700D 650D 600D 550D.



Disclaimer: This product is suitable for Canon T3i and T5i camera, but not compatible with the camera model different Canon T3 or T5. Please check your camera model before placing an order.



Product Specification :

Rated Power: 14.8W

Input: 100V-240Vac 1.5A max 50-60Hz; Output: DC 7.4V/2A



Safety certificate：

CE ,FCC ,UL,CCC and etc certified



Package List:

1 x ACK-E8 AC Power Adapter

1 x US Plug AC Power Cord

1 x DR-E8 dummy battery.



Warranty & After-sales service:

-- 18 Months Warranty and Easy-to-Get customer service .

-- If you have any questions about our products, please contact us promptly, we will speed for you to solve.Thanks!

• [COMPATIBLE WITH MODEL:] The ACK-E8 AC Power Supply Adapter Charger kit compatible with Canon EOS Rebel T5i T4i T3i T2i Kiss X6 Kiss X5 Kiss X4 700D 650D 600D 550D Cameras , DR-E8 DC Connector coupler replace LP-E8 Battery, Equipped with AC/DC power adapters ,continuously charge for your camera.
• [USE STEP INSTRUCTIONS:] First Remove the Canon original LP-E8 battery, Replace with TKDY DR-E8 virtual battery, and cover the battery compartment cover, Connect the ack-e8 adapter and the power outlet, then to start the camera.
• NOTE: The DR-E8 dummy battery is new version, The pins are different from the original battery, but it does not affect its normal use. Please must to be close the battery compartment door, otherwise the camera cannot be started.
• [Advantages:] It is a tool designed for long-term studio shooting. When you need to take photos or videos continuously, you don't have to worry about the sudden power failure of the camera. It saves you time and greatly improves work efficiency. It is a good choice for studio photographers or photography enthusiasts.
• [AFTER-SALES GUARANTEE:] If you are not satisfied with the product,You can always get in touch with us,We will refund the whole money or send a new as a replacement to you.

User questions & answers

Question:	Does this work with a Canon Rebel T6i
Answer:	See manufacturer's compatibility list.
Question:	Does this work for the canon eos m200 please
Answer:	This is compatible with cameras that use the Canon LP-E8 Battery.
Question:	Does this work with canon powershot G7x
Answer:	Sorry, this ack-e8 ac adapter kit is not work with canon powershot G7x camera. thanks!
Question:	Does this work with the canon m
Answer:	Dear customer, Sorry, this ACK-E8 power adapter is not available for Canon m50 camera. The ACK-E12 (ASIN:B07KC7QCM1) adapter fit the Canon eos m50 camera. The CA--110 (ASIN:B072FC9D5T) adapter fit the Canon VIXIA HF M50 camera.

Product features

Power Supply Description:

This kit achieve replacement AC Power Adapter is designed to supply uninterrupted power for your camera while downloading pictures to your computer, for extended work in a studio, or while viewing images while connected to your PC ,TV or VCR. This device will provide constant power to your camera (It will not charge batteries) You MUST make sure the Battery door cover is fully closed in order for this device to work. NOTE: DC Coupler’s can implement original all functions.But our DC Coupler can’t use alone,you need equip this kit’s AC/DC Adapter so that Works well with your cameras.

Charger for Canon Camera Model:

• Canon EOS Rebel T5i T4i T3i T2i,

• Canon EOS Rebel Kiss X6 Kiss X5 Kiss X4,

• Canon EOS Rebel 700D 650D 600D 550D.

Disclaimer: This product is suitable for Canon T3i and T5i camera, but not compatible with the camera model different Canon T3 or T5. Please check your camera model before placing an order.

Safe Switching Adapter:

• Shortage Protection, Overload Protection, Over Voltage Protection. No need to worry about any fires explosions or shocks occurring.

Product Specification:

• Rated Power: 14.8W
• Input: 100V-240Vac 0.18~0.35A 50-60Hz;
• Output: DC 7.4V/2.0A.
• Color: Black

Package List:

• 1 x ACK-E8 AC Power Adapter
• 1 x Us AC Power Charger Cord
• 1 x DR-E8 DC Coupler

Product description

HY1C ACK-E12 DR-E12 AC Power Adapter Kit



- This DR-E12 dummy battery kit Achieve Canon LP-E12 battery all power functions, it can provide continuous constant power to the camera without the need of camera battery, so as to solve the trouble of frequent replacement and charging multiple batteries.



- Camera + ACK-E12 Power Adapter kit realizes the function of high-definition webcam, connects to PC, TV, VCR, used for web conferences, video chat, so that you can long-term shoot more Facebook, Youtube, Tiktok, Ins videos.



Compatible Camera Model:

Canon EOS M

Canon EOS M2

Canon EOS M10

Canon EOS M50

Canon EOS M50 Mark II

Canon EOS M100

Canon EOS M200

Canon Kiss M Mirrorless Digital Camera.



You Will Get:

1*ACK-E12 AC Power Adapter

1*US Pulg AC Cable

1*DR-E12 Dummy Battery



Specification:

Input AC 100-240V 50/60Hz (global)

Output voltage: 7.4V / 2A / 15W

AC/DC/Coupler Cord 9 ft



HY1C:

We are a professional manufacturer of power adapters, and strive to satisfy customers and strive to exceed their expectations. Therefore, your support is our best motivation.

30 days refund guarantee, 365 days replacement warranty

If you are not satisfied with HY1C products, please feel free to contact us. We are fully responsible for the products and will do our best to solve your problems quickly and effectively.

• 1.【Adaptor Specifications】Input 100V-240Vac 50/60Hz, Output 7.4V/2A 15W. AC Cable 4 foot / 120cm, DC Cord 5 foot / 150cm
• 2.【Function】HY1C DR-E12 Dummy Battery kit replaces the camera LP-E12 LC-E12 battery charger set and connects to an ac adaptor to provide uninterrupted constant power to the camera to keep the camera running for a long-term and get rid of battery limitations.
• 3.【Webcam】Connect the camera to Capture Card and HDMI Cable to take Photos/Videos/Advertisements/Movies/Broadcast live/Video conferencing/Vlog, connect pc, tv, the image quality can be as high as 1080P60 or 4K , To meet your favorite shooting and production, no time limit.
• 4.【Compatible Camera Model】HY1C ACK-E12 AC Power Adapter Kit for Canon EOS M, M2, M10, M50, M50 Mark II, M100, M200, Kiss M Mirrorless Digital Cameras. 【Warm Trip: If you need to use DR-E12 dummy battery kit outdoors, please search for ASIN: B08LS8ZZSN
• 5.【Packing List】1 * ACK-E12 Power Supply Adapter, 1 * DR-E12 DC Coupler, 1 * AC Cable(US Plug). 30 days return and 18 months warranty.

Product features

HY1C ACK-E12 DR-E12 AC Power Adapter Kit

• Compatible Camera Model:
• Canon EOS M
• Canon EOS M2
• Canon EOS M10
• Canon EOS M50
• Canon EOS M100
• Canon EOS M200
• Canon EOS M50 Mark II
• Canon Kiss M Camera.