14 best lg tv mounting screws

Product description

Already have the mount but no screws for the back of your TV? Don't know what size you need? We have the solution: A complete set of TV mounting screws and washers to fit any LG TV for wall mounting. Guaranteed to fit or we will issue a full refund.

• Set of screws/ bolts and washers to wall mount any LG flatscreen TV
• Zinc plated steel with ESD discharge preventive

User questions & answers

Question:	Will these screws work with a rocketfish mount? i have an lg 55sm8600pua 55" tv and don't have the right hardware for it currently
Answer:	I do not know why it does not mention metal, but I was advised by the manufacturer of my sailboat that they use it to seal the metal plates that that sit over the shroud straps on my sailboat. So, the metal shroud thing that comes up through the boats/wood then fiberglass has a metal plate over it (the running rigging/wire connects to the shroud strap)and I used it to seal the plate so water can't come into the boat. I think you could peal it off the metal but it hardens to the fiberglass. I hope that helps.
Question:	Will these screws fit to mount the 55in LG B
Answer:	The plug 1/4 inch hole, get a 1/4 inch machine screw in bronze or stainless. (bronze is better) the coat the screw and the hole with the 5200 and the put the nut on the screw. It is best to plug the hole with the crew but to use this as a sealant. After it cures you will never be able to set the nut off the screw or the screw out of the hole. It really does work underwater. I've used to with scuba equipment to install fitting below the waterline.
Question:	M6 mounting bolts for toshiba led tv
Answer:	Yes Once setup you can't remove
Question:	M6 for 55k6500aua
Answer:	Depends on the load. If you remove the patina (sand or wire brush until they look shiny) from both surfaces and there is sufficient bonding area it should.Make certain the joint is secured until the adhesive is fully cured.

Product description

This WALI product is a whole bag of screws with washers and spacers. It includes M4, M5, M6, and M8 TV screws and spacers which can meet various mounting requirements and work for all TVs up to 80". Our hardware kit was designed to maximize compatibility between all types and brands of TV such as Samsung curved TVs. It is very convenient to attach your TV to the Mount or Wall by using these screws.

Package includes:

M4 Screws--12mm/0.47 inches/ 4 pieces

M4 Screws-- 35mm/1.38 inches / 4 pieces

M5 Screws-- 12mm/0.47 inches/ 4 pieces

M5 Screws-- 35mm/1.38 inches / 4 pieces

M6 Screws--12mm /0.47 inches/ 4 pieces

M6 Screws --20mm/0.79 inches 4 pieces

M6 Screws -- 35mm /1.38 inches / 4 pieces

M8 Screws -- 16mm/0.63 inches / 4 pieces

M8 Screws -- 20mm/0.79 inches /4 pieces

M8 Screws -- 25mm/0.98 inches /4 pieces

M8 Screws -- 30mm/1.18 inches /4 pieces

M8 Screws -- 35mm /1.38 inches /4 pieces

M8 Screws -- 40mm/1.57inches /4 pieces

M8 Screws -- 45mm/1.77inches /4 pieces/ Necessary for Samsung Curved TVs

M8 Screws-- 50mm/1.97inches /4 pieces/ Necessary for Samsung Curved TVs

M4/M5 Washers/ 8 pieces

M6/M8 Washers/ 8 pieces

2.5mm Spacer/ 8 pieces

22mm Spacers/ 4 pieces

• Design: This product is a whole package of screws with washers and spacers. It includes M4, M5, M6, and M8 TV screws and spacers up to 80" TV.
• Purpose: Our hardware kit was designed to maximize compatibility between all types and brands of TV such as Samsung curved TVs.
• Complete: The 88 pieces include all shapes/ sizes of screw, washers, and spacers, our complete set of pre-divided hardware ensures your installation to be easier.
• Ease of Use: The size of all the screws shown on the package, it is easier for people to figure out easily what they need to use.
• Package Includes: 1 x WALI UVSP Package, User Manual, 10 Year Protection

User questions & answers

Question:	Are the 8 screws which attach the arms to vesa mount included
Answer:	Yes a garden sprayer works
Question:	Will this fit samsung qled 65 inch
Answer:	Lowes does carry it, but in smaller containers that may be more expensive.
Question:	Will this fit Samsung tv 75 inch
Answer:	Yes, it may be sprayed with a garden sprayer or a sprayet. You must back brush immediately after spraying.
Question:	Will the screws fit samsung electronics un40mu
Answer:	We do not recommend this with any of our products.

Product features

UVSP

This product is a whole package of screws with washers and spacers, it includes M4, M5, M6, and M8 TV screws and spacers which are total 88 pieces, those can meet various mounting requirements and work for all TVs up to 80"

• Includes all the hardware you'll need to attach your TV to a wall mount in one easy to use pack. That means no more mount compatibility issues with your TV.
• Pack contains M4, M5, M6, and M8 TV screws and spacers for mounting virtually all TV's up to 82". It'll ensure you aren't screwed when it comes to mounting your TV.
• Compatible with every major TV brand out there. TCL, Sony, LG, Sharp, Philips, Panasonic, and more. M8 screws even guarantee compatibility with Samsung TVs, which tend to have TV mount compatibility issues.
• These are not your average screw. Built to be insanely durable & strip-resistant, they'll stay tight and last. Combine the included spacers with the screws to accommodate uneven TV backs.
• All hardware is pre-divided & labeled to help you pick the exact screws you need without hassle. Extra screws can be thrown in your toolbox and used for any other project.

User questions & answers

Question:	I have samsung un43m5300af model.. can't find my screws for the stand ... will any of these work for this model
Answer:	Unfortunately this hook is not made for your framing gun . This hook is designed for bostich brad & finish nailers .
Question:	Are these vesa compliant
Answer:	If I remember correctly, it did.
Question:	I don't need to mount my tv. I just need screws for my tv base. Will this work? I lost the original screws when moving
Answer:	It's safe to use on concrete. I use it all the time on concrete surfaces.
Question:	Will these work with the mounting Dream mount
Answer:	We used it in our garage on a unsealed floor works well so I would say you are fine.

Product description

PERLESMITH - MAKING YOUR WORLD BETTER



Take the hassle out of having to go to the hardware store. Our TV wall mounting hardware is here to make your life that little bit easier. It comes with all the necessary screws, washers and spacers that will fit any brand of TV up to 80 inches in size.



What’s Included?

Here are the contents of our Universal TV mounting hardware:

M4 x 12mm Screws

M4 x 35mm Screws

M5 x 12mm Screws

M5 x 35mm Screws

M6 x 12mm Screws

M6 x 20mm Screws

M6 x 35mm Screws

M8 x 16mm Screws

M8 x 20mm Screws

M8 x 25mm Screws

M8 x 30mm Screws

M8 x 35mm Screws

M8 x 40mm Screws

M8 x 45mm Screws - Necessary for Samsung Curved TVs

M8 x 50mm Screws - Necessary for Samsung Curved TVs



M4/M5 Washers

M6/M8 Washers



2.5mm Spacer

22mm "Bump-Out" Spacers



If You Ready To Attach Your TV Safely & Securely To Your TV Mount & Start Watching Your Favorite TV Shows ASAP, Then Click The Add To Cart Button Now!

• 🔨 ALL YOU NEED IN ONE PACK - Our TV hardware comes with everything you need to attach your TV successfully to your TV wall mount. Our pack contains M4, M5, M6, and M8 TV screws, washers and spacers for mounting all TV's up to 80"
• 🔨 FITS ALL TV BRANDS - Our TV wall mount hardware conveniently fits all TV brands such as Samsung LG Sharp Philips Panasonic Toshiba Sony Vizio TCL Sanyo Insignia Hitachi Polaroid RCA JVC Apex Daewoo Pioneer Hisense & more
• 🔨 STRIP PROOF & DURABLE - This TV mount hardware kit comes with strip proof, durable screws so that you won’t have to go through the process of tightening the screws and then half way through they become bare and thread-less
• 🔨 CLEARLY LABELED PACKAGING - The packaging of this TV hardware kit is clearly labeled with the names and sizes of each screw, washers and spacer neatly separated into their own box so you can easily find which item you need and won’t get confused
• 🔨 WHY CHOOSE US - Rest assured that our TV bracket hardware fits your TV of choice perfectly while keeping your television securely attached to your mount

User questions & answers

Question:	Is this for replacement for TV to stand or tv mounted to wall
Answer:	Yes. We have a 100% sure fit guarantee.
Question:	Is ikea stand uppleva compatible with these screws
Answer:	I ordered them thinking they were long enough bolts for my lg tv. They were not long enough. It may be for yours not sure.
Question:	Will this work with a 65" class q80r qled smart 4k uhd tv (2019) for attaching to a table based stand, not a wall mount
Answer:	The set comes with a multiple screws different sizes and lengths so one of the sets should fit any LG t.v. available!
Question:	All samsung tv's have 1.25mm thread pitch, according to their website. a comment here says these are wrong thread pitch for samsung. won't work
Answer:	No, just 2 hooks. Any hardware store should have a suitable spring and a roll pin.

Product description

Make any TV mount install easy with a complete set of pre-divided hardware. The contents were selected to maximize compatibility between all sorts of TV and mount brands. Such as Dynex Insignia Sylvania Sanyo Magnavox Westinghouse Olevia SONY Sanyo Panasonic Samsung LG Sharp

Screw:

M4 x 12mm Screws（4）

M4 x 20mm Screws（4）

M5 x 12mm（4）

M5 x 20mm Screws（4）

M5 x 30mm Screws（4）

M6 x 12mm Screws（4)

M6 x 20mm Screws（4）

M6 x 35mm Screws（4）

M8 x 12mm Screws（4）

M8 x 20mm Screws（4）

M8 x 35mm Screws（4）

M8 x 45mm Screws（x4）

Washers:

M4/M5

M6/M8

Spacers:

x15mm（4）

x5mm（8）

• This product is a whole package of screws with washers and spacers, it includes M4, M5, M6, and M8 TV screws and spacers which are total 64 pieces, those can meet various mounting requirements and work for all TVs up to 80"
• We understand how annoying it is when you have your new TV in hands, but can’t find the proper size or length of screws to mount it, that’s why our product is so useful, our hardware kit was designed to maximize compatibility between all types and brands of TV
• The 64 Pieces include all Shapes/ sizes of screw, washers, and spacers, our complete set of pre-divided hardware ensures your installation to be easier
• Easy for installation, the size of all the screws shown on the package, it is easier for people to figure out easily that what they need to use, it is very convenient to attach your TV to the Mount or Wall by using these screws
• Screw: M4 x 12mm Screws（4）, M4 x 20mm Screws（4）, M5 x 12mm（4）, M5 x 20mm Screws（4）, M5 x 30mm Screws（4）, M6 x 12mm Screws（4), M6 x 20mm Screws（4）, M6 x 35mm Screws（4）, M8 x 12mm Screws（4）, M8 x 20mm Screws（4）, M8 x 35mm Screws（4）, M8 x 45mm Screws（x4）, Washers: M4/M5 and M6/M8 , Spacers: x15mm（4）and x5mm（8）

User questions & answers

Question:	Are these made from a durable metal? The screws that came with my stand were very soft and I accidentally stripped the head without even trying
Answer:	Check promotion, up to 80.
Question:	Does anybody know if these screws will work for a 24'' ultragear™ fhd 144hz 1ms gaming monitor
Answer:	I used it on my Samsung 50 inch. It's a universal kit. With the variety of spacers and screws I don't think you'll have a problem.
Question:	Does this set come with lag bolts and screws to mount the bracket to the wall/studs
Answer:	The WALI UVSP contains M4, M5, M6, M8 TV screws of various length, and washers and spacers. As for specific Samsung un40mu6300, we recommend you seek advice from Samsung Customer Service to find out exactly what screws is compatible with the model.
Question:	Will this work on a 50 inch jvc tv
Answer:	Yes it will for sure. Another tip let's say you found the correct thread and if fits your TV but for example the screw length is too long,,,that's when all you do is add one of the plastic spacers which in turn is as if your technically shortening the screw size. That's one option obviously the 2nd option is just finding the correct length. *** I install TVs for a living and I'm a Amazon service provider.

Product description

Perlegear TV hardware kit comes with all the all kinds of M4 M5 M6 M8 screws, washers and spacers that will fit any brand of TV or TV wall mount up to 80 inches in size. It is very convenient to attach your TV to the Mount or Wall by using these screws.

What’s Included? Here are the contents of our Universal TV mounting hardware:

M4 x 12mm Screws M5 x 12mm Screws

M4 x 35mm Screws M5 x 35mm Screws

M6 x 12mm Screws M8 x 16mm Screws

M6 x 20mm Screws M8 x 20mm Screws

M6 x 35mm Screws M8 x 25mm Screws

M8 x 30mm Screws M8 x 35mm Screws

M8 x 40mm Screws

M8 x 45mm Screws - Necessary for Samsung Curved TVs

M8 x 50mm Screws - Necessary for Samsung Curved TVs

M4/M5 Washers

M6/M8 Washers

2.5mm Spacer

22mm "Bump-Out" Spacers

SO LET'S GET YOUR TV MOUNTED!

• 🌈 All You Need In One Pack: Universal hardware pack has everything you will need, which comes with kinds of M4 M5 M6 M8 screws, washers and spacers in one box so you needn’t worry about the screws are too long or too short
• 🌈 Fit All TV Brands: Our TV wall mount hardware works with all TV brands like Samsung, LG, Sanyo, Sony, Vizio, Haier, Philips, Panasonic, Insignia, Hitachi, RCA, Emerson, Element, HiSense flat or curved TVs and more
• 🌈 Easy To Assemble: All hardware is pre-labeled to help you pick the exact screws you need without any hassle. Extra screws can be thrown in your toolbox and used for any other project
• 🌈 High Quality: All of the screws are made of durable steel material, they will anti-stripped, stay last and tight to ensure that your installation process is smooth and safe
• 🌈 Caring Customer Service: We are so confident in the construction, strength and durability of this hardware kit that we provide friendly customer service. Please feel free to contact us anytime, rain or shine

User questions & answers

Question:	Do we need adapters separately
Answer:	Yes, they are not screws but rather bolts with flat washers and nuts.

Product description

Rentliv Universal TV Hardware Kit

Our hardware kit was designed to ensure high compatibility for TVs up to 80", it includes M4, M5, M6, and M8 TV screws, washers and spacers,

works with any TV mount and Monitor mount.



All Shapes and Sizes:



TV Screws:



M4 X 12mm (4 pcs) M4 X 35mm (4 pcs)



M5 X 12mm (4 pcs) M5 X 35mm (4 pcs)



M6 X 12mm (4 pcs) M6 X 20mm (4 pcs) M6 X 20mm (4 pcs)



M8 X 16mm (4 pcs) M8 X 20mm (4 pcs) M8 X 25mm (4 pcs)



M8 X 30mm (4 pcs) M8 X 35mm (4 pcs) M8 X 40mm (4 pcs)



M8 X 45mm (4 pcs) M8 X 50mm (4 pcs)



Washers:



M4/M5 (4 pcs) M6/M8 (4 pcs)



Spacers:



3mm (4 pcs) 22mm (4 pcs)

• ✅Universal TV Hardware Kit: Includes M4, M5, M6, and M8 TV screws, washers & spacers, fits All TVs up to 80", works with any TV mount and Monitor mount.
• ✅High Compatibility: Compatible with all types and brands of TV, to fit virtually every screen on the market. Especially combines with Samsung curved TVs.
• ✅Durable Material: Screws, washers and spacers are insanely durable & strip-resistant, they'll stay tight and last, ensure that your installation process is smooth and safe.
• ✅Clearly Labeled: The names and sizes of each screw, washer and spacer on the package is pre-divided and labeled, it saves your time to figure out what you need to use.
• ✅Durable Material: Built to be insanely durable & strip-resistant, they'll stay tight and last. Combine the included spacers with the screws to accommodate uneven TV backs.

User questions & answers

Question:	Hi will this screw set fit a Samsung curved screen 42inch
Answer:	Hello, This universal hardware pack should have what you need given the different lengths of screws, spacers and washers. Feel free to give us a call at 855-428-2490 for any more details. Kathryn @ECHOGEAR
Question:	I have a 55" lg and need m5X12mm screws,will this work on base stand or are these for the vesa mount holes
Answer:	yes as the name says they are universal if you can't find something to mount your tV in this kit your TV can't be mounted lol yes they are VESA compliant
Question:	What material are these kits made from,are they anti-rust
Answer:	Well VESA mounts are pretty standard, but a TV base could be anything. I probably wont know, but if you post your brand and model someone might know what kind of screw it needs.
Question:	I have a 55 inch Roku TV what is the screw size ?for the mount in the back
Answer:	yes, it is a universal set, the screws will work on al tv's, you may have to use washers with the screws so the screws will not be too long going into the back of the tv. hope this answers your question

Product features

Rentliv Universal TV Hardware Kit

Our hardware kit was designed to ensure high compatibility for TVs up to 80", it includes M4, M5, M6, and M8 TV screws, washers and spacers, works with any TV mount and Monitor mount.

All Shapes and Sizes:

• TV Screws:

M4 X 12mm (4 pcs) M4 X 35mm (4 pcs)

M5 X 12mm (4 pcs) M5 X 35mm (4 pcs)

M6 X 12mm (4 pcs) M6 X 20mm (4 pcs) M6 X 20mm (4 pcs)

M8 X 16mm (4 pcs) M8 X 20mm (4 pcs) M8 X 25mm (4 pcs) M8 X 30mm (4 pcs)

M8 X 35mm (4 pcs) M8 X 40mm (4 pcs) M8 X 45mm (4 pcs) M8 X 50mm (4 pcs)

• Washers: M4/M5 (4 pcs) M6/M8 (4 pcs)
• Spacers: 3mm (4 pcs) 22mm (4 pcs)

Flexible Combination

Multiple combinations to meet different installation requirements.

High Compatibility

Fit every TV screen, especially combines with curved TVs.

Clearly Labeled

The package is pre-divided and labeled for easy use.

Product description

This packet contains enough hardware to mount one VESA 400 x 400 TV (41” & larger), kit includes:

M8x45mm XX Long Phillips Head Bolts - For TVs > 40”

10mm Long Spacers for more wire room

15mm Long Spacers for more wire room

stainless steel, 8mm flat washers

• According to the feedback of my clients, it will perfect fit most 50"-82" tv of Samsung LG Vizio Philips Sony Bravia Sharps etc
• Please don't forget to check your owner's manual first before placing your order, this kit will fit most of tv over 41" but you need to know the specificly what size bolt needed for your tv
• Metric M8 Philips Screw Head machine screws with 1.25mm threaded pitch and 45mm threaded length.

User questions & answers

Question:	would these screws fit samsung model nu
Answer:	This is hardware that will help you mount your TV on a base, which you can then place on a table. It is not used for wall mounting.
Question:	Does this works for the samsung qled
Answer:	Hi, these screws are used for TVs and it can't fit the stand. Any questions, pls let us know： [email protected]
Question:	What is the Pitch? 1 or 1.25mm
Answer:	Thanks for your question. Yes, the screw parcel can work with a 65" class q80r qled smart 4k uhd tv (2019) for attaching to a table based stand. If you have any questions, pls let me know: [email protected]
Question:	Would these fit Samsung model UN
Answer:	I know the website and manual for the new 32 inch Samsung mistakenly disclose 1.25 thread pitch. In their help pages they acknowledge the mistake, and the correct pitch is 0.7.

Product description

PERLESMITH - MAKING YOUR WORLD BETTER



Take the hassle out of having to go to the hardware store. Our TV wall mounting hardware is here to make your life that little bit easier. It comes with all the necessary screws, washers and spacers that will fit any brand of TV up to 80 inches in size.



What’s Included?

Here are the contents of our Universal TV mounting hardware:

M4 x 12mm Screws

M4 x 35mm Screws

M5 x 12mm Screws

M5 x 35mm Screws

M6 x 12mm Screws

M6 x 20mm Screws

M6 x 35mm Screws

M8 x 16mm Screws

M8 x 20mm Screws

M8 x 25mm Screws

M8 x 30mm Screws

M8 x 35mm Screws

M8 x 40mm Screws

M8 x 45mm Screws - Necessary for Samsung Curved TVs

M8 x 50mm Screws - Necessary for Samsung Curved TVs



M4/M5 Washers

M6/M8 Washers



2.5mm Spacer

22mm "Bump-Out" Spacers



If You Ready To Attach Your TV Safely & Securely To Your TV Mount & Start Watching Your Favorite TV Shows ASAP, Then Click The Add To Cart Button Now!

• 🔨 Upgraded TV Hardware Pack - Pack contains M4, M5, M6, and M8 TV screws, washers and spacers for mounting all TVs up to 80". It'll ensure you get rid of the screws too long or too short
• 🔨 High Quality Steel Material - We refine and purify each piece of screws so that you don’t worry about they become bare and thread-less in the process of tightening the screws
• 🔨 FITS ALL TV BRANDS - Our TV wall mount hardware conveniently fits all TV brands such as Samsung LG Sharp Philips Panasonic Toshiba Sony Vizio TCL Sanyo Insignia Hitachi Polaroid RCA JVC Apex Daewoo Pioneer Hisense & more
• 🔨 CLEARLY LABELED PACKAGING - The packaging of this TV hardware kit is clearly labeled with the names and sizes of each screw, washers and spacer neatly separated into their own box so you can easily find which item you need and won’t get confused
• 🔨 US-BASED CUSTOMER SERVICE - We are ready to provide the awesome TV wall mount screws at a great value and glad to answer your pre-purchase and installation questions 7 days a week to help you out

User questions & answers

Question:	What is the thread pitch in the M8 screws
Answer:	Dony know if screws fit 24'' ultragear™ fhd 144hz 1ms gaming monitor If it has a vesa mount which uses size M4 M5 M6 M8 screws then those screws may hold a monitor with this screw set..
Question:	What is the thread pitch of the m4 screw
Answer:	No it usually doesn't but if you give me your name when you place the order I will add a free set of lag bolts and washers no problem.
Question:	Podrían venir tornillos ahí para poner las patas del televisor de abajo no para soporte de pared para las patitas de abajo los extravie y quisiera pon
Answer:	I definitely believe it will work on the 50 inch TV there are many sizes.

Product description

Full motion TV wall mount for most 26”-55“ TVs up to 60LBS, with max VESA of 400 x 400mm/mounting holes spacing. Specifically, it fits VESA 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm.



Upgrade your viewing experience with +5°/-15°tilt, 90°swivel and +/-3° rotation adjustment. Pull out to 19.3” and retract back to 3”, making your TV alive to move.



Heavy duty steel construction, supporting TV weight up to 60 LBS. loading capacity Constructed with heavy duty steel materials with durable powder coated finish. This mount is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted TV stable and secure.

• 【Perfect centered design】 TV wall bracket fits for most of 26-55 inch OLED/LED/Plasma TVs up to 60 LBS, with max VESA of 400 x 400mm/mounting holes spacing. Please refer to detailed information on the product description to see if this TV wall mounts fits your TV from the following aspects: VESA, wood stud location and possible blocked input.
• 【Flexibility】 With full motion TV wall mount, your TV can be freely adjusted to desired angle and distance to provide comfortable viewing: tilt the TV 5° up and 15° down to reduce glare, swivel the TV left or right according to your seat. Pull out to 19. 3” and retract back to 3”, making your TV alive to move. +/-3° post-installation adjustment allows for perfect TV leveling.
• 【Easy installation】 TV mount with decent instruction and full range of hardware are packed in pre-labeled bags. We also offer cable ties and bubble level as gifts. Concrete Anchors will be sent if you request. All our TV brackets can not be installed on drywall alone.
• 【Safety & Stability】 Patent No. : 29/588, 044. Technology of robot welding makes the whole TV mounting bracket unit sturdy and safe. Constructed with heavy duty steel materials with durable powder coated finish.
• 【US based customer support】US based customer service team is always online to provide you with pre-sale & after-sale support as well as consulting service on product use and installation.

Product features

EXTENDABLE LIKE LUFFY THE MONKEY

The TV wall mount can fully extend 19.3” from wall to point your TV exactly where you want to view it from.

SAY GOODBYE TO SCREEN GLARE

The TV mount can tilt your TV forward 15° and backward 5° to reduce the glare from light.

VIEW YOUR TV FOR MAXIMUM COMFORT

Want to watch movie with your family from any seat in the room? Now you can adjust your wall mount TV bracket left or right 90° for the optimal view.

FULL MOTION TV MOUNT--SWIVEL ANGLE ADJUSTMENT

Does this mount easily swivel to different angles without having to loosen bolts and readjust?

Yes, you simply pull the TV away from the wall and swivel/rotate to the favored position.

FULL MOTION TV MOUNT--EXTEND & RETRACT TV

Want to point your TV exactly where you want it?

Extend your TV by holding the left and right sides of the TV at the same time.

FULL MOTION TV MOUNT--LEVELING ADJUSTMENT AFTER INSTALLATION

Want to level TV anytime?

Loosen 4 leveling bolts on the rear of the TV plate by maximum 2 turns and re-tighten to secure after adjusting.

FULL MOTION TV MOUNT--TILTING ANGLE ADJUSTMENT

Want to reduce glare from lights？

Pull TV to your desired angle, then fasten 2 tilting bolts with Allen key.

Product description

To help eliminate problems during mounting TVs to wall units, an industry-wide group was formed named VESA (Video Electronics Standards Association).

Most TV manufacturers comply with the standards established by VESA. If you look at the back of your TV you will notice that the screws holes are in a perfect square pattern.



When you measure the distance between holes they should be as follows:

VESA 75 measures 75 mm x 75 mm (approx. 3inch x 3inch)

Uses M4 (Small) screws



VESA 100 measures 100 mm x 100 mm (approx. 4inch x 4inch)

Uses M4 (Small) screws



VESA 100/200 measures 100 mm x 200 mm (approx. 4inch x 8inch)

Uses M4 (Small) screws



VESA 200 measures 200 mm x 200 mm (approx. 8inchx 8inch)

Uses M6 (Medium) screws



VESA 400 measures 400 mm x 400 mm (approx. 16inchx 16inch)

Uses M8 (Large) screws



Package included:

4Pcs M4x10mm screws with 4Pcs M4 washers

4Pcs M6x20mm screws with 4Pcs M6 washers

4Pcs M8x20mm screws with 4Pcs M8 washers

• To help eliminate problems during mounting TVs to wall units
• Meets VESA Standards (Video Electronics Standards Association)
• 304 Stainless Steel - No Rust Ever
• Easy install with Phillips head screwdriver
• Bolt Size for TVs & Monitors VESA under than 200 measures 200 mm x 200 mm (approx. 8inchx 8inch) Uses M4 (Small) screws VESA 200 measures 200 mm x 200 mm (approx. 8inchx 8inch) Uses M6 (Medium) screws VESA 400 measures 400 mm x 400 mm (approx. 16inchx 16inch) Uses M8 (Large) screws

User questions & answers

Question:	What is the thread pitch on the 6m screws
Answer:	Dear Amazon Customer. Thank you for the interest and contacting us regarding the Rentliv Store Products. We understand and we're glad to help. In most cases, the Rentliv Hardware kit should be compatible but you should make sure the size of your tv vesa.Or dear friend,you can buy it first to see if it fits your TV set, if not, you can return it.Hope to help you. Thank you!
Question:	My new tv needs m6 screws that are 8-10 mm long - is this the length of the m6 screws included in this package
Answer:	Thanks for your question. There are many types of screws and spacers/washers in the package, so you can choose the correct size to install your tv. If the TV screws are too long for your TV, you could try to install spacers/washers between the TV brackets and your TV. BTW, the spacers/washers can be folded to install. If you have any other questions, please feel free to contact us: [email protected]
Question:	does it work for samsung 40 class 7100 tv
Answer:	The screws seem very durable and worked great for me to mount a 93 lbs TV on my mount.

Product description

Fits 42-70" TVs This TV mount fits most 42-70" LCD/LED/Plasma TVs sold today such as those from TCL, Samsung, Sony, Panasonic, Toshiba, Vizio, Sharp, LG, Philips etc. Specifically, it fits for VESA 200X100, 200X150, 200X200, 300X200, 300X300, 400X200, 400X300, 400X400, 500X300, 600X200, 600X400mm. Retracts 2. 4" low profile, Extends 14. 6" from the wall, Tilt, Swivel and Rotate function With articulating arm, this TV mount retracts to 2. 4"(to wall) to save space, and extends up to 14. 6" from the wall. +5°/-15° Tilt, +/-45°Swivel and +/-3° rotation for maximum viewing flexibility. Heavy duty steel construction, 100 LBS loading capacity Constructed with heavy duty steel materials with durable powder coated finish. This TV wall mount TV bracket is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted TV stable and secure, supporting TV weight up to 100 LBS. Bubble level, 9' high speed HDMI cable and cable ties TV wall mounts come with bubble level and 9' HDMI cable. HDMI cable supports 3D, Ethernet, 1440P and Audio Return conforming to latest HDMI 1. 4 Standard. 3 cable ties for cable management. Includes all necessary mounting hardware This TV bracket ships with hardware for both wall and TV mounting but concrete anchors are not included. Please tell us to ship out if needed. All our TV wall mounts are NOT for dry wall alone application

• UNIVERSAL COMPATIBILITY: Full motion TV wall mount for most 42-70 inch OLED/LED/Plasma TVs up to 100LBS, fits VESA 200X100mm(8"x4") to 600X400mm (24"x16"), wall mounting studs distance is 24 inch maximum
• HEAVY DUTY DESIGN: Features with heavy duty materials with smooth and stable moves holds TV up to 100 lbs. Upgrade your viewing experience with +5°/-15°tilt, 45°swivel and +/-3° rotation adjustment
• EASY FOR TV CENTERING: This TV mount fits for solid concrete wall/ wood stud spacing of 16", 18", 24". Easy centering (lateral adjustment) with 24” long wall plate. Caution: This TV mounting bracket is NOT for drywall alone installation
• EASY TO INSTALL: This TV mount with decent instruction and all included hardware in pre-labeled bags. Comes with cable ties, 6ft HDMI cable and bubble level as gifts. Concrete anchors will be sent per request
• WORLD-CLASS CUSTOMER SERVICE: Our US based customer service experts are available Every day of the week to help, Our TV mount is 10-year warranted！

User questions & answers

Question:	Can i mount my 55 samsung q60t smart tv
Answer:	Dear Customer, Thank you for the interest and contactign us regarding the Mounting Dream mount. We understand and we're glad to help. The QN55Q60TAFXZA has a 200x200mm VESA hole pattern weighing approximately 35.71 lbs without stand which is clear of overlapping/blocked inputs. Yes, the MD2296-24K requires up to 24" inch wood stud supports fitting up to 600x400mm VESA comibnations able to support up to 100 lbs maximum weight which is perfectly compatible within TV specifications. Please feel free to contact us for any other concern by mail [email protected] Thank you!
Question:	Will it fit a sony xbr75x900f (75" and 97 pounds
Answer:	Isn't that 73Lbs?
Question:	Will this fit my samsung dc55e 55inch tv
Answer:	Dear Chris. Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we're glad to help. We have confirmed that the DC55E has a 400mm x 400mm VESA hole pattern weighing approximately 34 lbs. without stand which is clear of overlapping/blocked inputs. Yes, the MD2296-24K will require/fit up to 24" inch wood stud spacing supports fitting up to 600mm x 400mm VESA hole combinations able to support up to 100 lbs maximum weight which is perfectly compatible within range with the TV specifications. Thank you! Mounting Dream Staff
Question:	How do I contact the manufacturer
Answer:	Not sure. I think you might be able to google their company name and go from there.

Product features

Why Mounting Dream？

Since 1993, Mounting Dream tries to offer the premium mounts and service. Every mount is designed to make your device safe, flexible for better viewing experience.

TILTS TO ENJOY YOUR VIEWING

With convenient tilting after installation, it's easy to tilts TV 5° up and 15° down to reduce glare & neck or eye strain for better viewing

SWIVEL TO POINT TV ALMOST ANYWHERE

Swivel up to ±45 degrees can meet your different viewing needs. The humanized wider swivel angle allows you to enjoy clear TV video without sitting directly in front of the TV

CUSTOMIZE YOUR VIEWING POSITION

Full motion TV mount with dual articulating arms up to 14.7 inch extension for optimal positioning, you can move TV into the perfect position when needed

Easy Level Adjustment After Installation

Simply use the Allen key included to loose the leveling bolts on the rear of the TV plate, adjust the level and then tighten the bolts.

Tool-Free Spring Loaded Handle to Adjust Tilting

The TV mount is designed with smart handle to adjust the tilting angle, which is convenient and save your effort.

Extended Arms for 24 inch Wood Studs

The TV bracket fits up to 24 inch wood studs spacing after assemble the extended arms, providing more compatibilities for your needs.

Get the Allen Key Anytime

Thoughtful design to help store the Allen key. Fetch it anytime!

Product description

Universal TV hardware kit MOUNT-TVWARE, designed for compatibility between all types of TV and monitor brands. Includes every bolt you'll need, and then some. Our kit comes neatly organized with each piece labeled to easily find everything needed.





Included Hardware:



M4 x 12mm Bolt - (4pcs)

M4 x 35mm Bolt - (4pcs)



M5 x 12mm Bolt - (4pcs)

M5 x 35mm Bolt - (4pcs)



M6 x 12mm Bolt - (4pcs)

M6 x 20mm Bolt - (4pcs)

M6 x 35mm Bolt - (4pcs)



M8 x 16mm Bolt - (4pcs)

M8 x 20mm Bolt - (4pcs)

M8 x 25mm Bolt - (4pcs)

M8 x 30mm Bolt - (4pcs)

M8 x 35mm Bolt - (4pcs)

M8 x 40mm Bolt - (4pcs)

M8 x 45mm Bolt - (4pcs)



M8 x 50mm Bolt - (4pcs)

M4/M5 Washer - (8pcs)

M6/M8 Washer - (8pcs)



2.5mm M6/M8 Spacer - (8pcs)

12mm M4/M5 Spacer - (4pcs)

• No Guessing - Remove the frustration of finding the right hardware that fits your TV. Our universal bolt, spacer, and washer kit is compatible with virtually every VESA compatible screen out there
• Included Sizes - Universal flat screen mounting kit comes with M4, M5, M6, and M8 TV Screws and Spacers to fit even the more obscure TVs on the market
• Hardware Construction - Bolts are made of sturdy steel to keep small and large TVs safely secure
• Labeled Packaging – Every piece of hardware is labeled and packaged separately so everything is nice and tidy out of the box so you can find what you need
• Compatibility - Recommended to fit virtually every screen on the market up to 80”

User questions & answers

Question:	Extra screws for TV stand
Answer:	Bought these for my Samsung NU8000 65 in and are to short grabs about two threads and thats it.
Question:	What would I need from this kit to get an M6 x 16 size since it doesn't specifically has that
Answer:	yes
Question:	do I need a bracket kit as well or this hardware package all I need to mount my 40" TV to the wall
Answer:	Yes,I think so.The parts are universal for VESA holes.
Question:	Does this work for the legs of the tv
Answer:	Stainless steel with black powder coated.

Product features

Included Hardware: ​

M4 x 12mm Bolt - (4pcs) M8 x 16mm Bolt - (4pcs) 2.5mm M6/M8 Spacer - (8pcs)

M4 x 35mm Bolt - (4pcs) M8 x 20mm Bolt - (4pcs) 12mm M4/M5 Spacer - (4pcs)

M8 x 25mm Bolt - (4pcs)

M5 x 12mm Bolt - (4pcs) M8 x 30mm Bolt - (4pcs) M4/M5 Washer - (8pcs)

M5 x 35mm Bolt - (4pcs) M8 x 35mm Bolt - (4pcs) M6/M8 Washer - (8pcs)

M8 x 40mm Bolt - (4pcs)

M6 x 12mm Bolt - (4pcs) M8 x 45mm Bolt - (4pcs)

M6 x 20mm Bolt - (4pcs) M8 x 50mm Bolt - (4pcs)

M6 x 35mm Bolt - (4pcs)

Why Choose Us?

At VIVO we are every bit consumers as we are engineers and creators. As the leading provider for desk and mounting solutions, we live for products that enhance and simplify everyday life at home and in the office. Our products are paired with friendly service and technical support with fast response times to help with any need!

• 🔨 ALL YOU NEED IN ONE BOX: Mounting Dream TV mount hardware comes with everything you'll need to attach your TV to your TV mount. Universal kit ensures compatibility for TVs up to 82", including M4, M5, M6, and M8 TV screws, washers & spacers.
• 🔨 FITS ALL TV BRANDS: Our TV wall mount hardware works with all TV brands: Samsung LG Toshiba Panasonic Sony Vizio TCL Sanyo Insignia Sharp Philips Hitachi Polaroid RCA JVC Apex Daewoo Pioneer Hisense & more.
• 🔨 BETTER CLASSIFICATION IN ORGANIZER BOX: Different size of TV screws, washers & spacers are assorted by Plastic Divided Storage Case with specific dimension to make your job easier.
• 🔨 MORE FREE GIFTS: The TV mount screw kit included necessary Philips Screwdriver, pencil and bubble level as free gifts.
• 🔨 US BASED CUSTOMER SUPPORT: We are glad to answer your pre-purchase and installation questions.

User questions & answers

Question:	What screws for a 55 inch LG al thinQ
Answer:	No para las patita no solo para la base del tv
Question:	will this be able to mount a 43 inch samsung 4k UN43NU7100? if not what kind of screws will i need
Answer:	They fit my NU7200.
Question:	Will these fit a samsung un65f
Answer:	It worked for my Samsung 55” Curved TV. It lists in the user manual that comes with the TV exactly which screws you need.
Question:	Are these stainless steel bolts
Answer:	1.25

Product features

What is included in package?

M4 x 12mm Screws M4 x 30mm Screws ·

M5 x 12mm Screws M5 x 30mm Screws ·

M6 x 16mm Screws M6 x 20mm Screws

M6 x 30mm Screws

M8 x 16mm Screws M8 x 20mm Screws

M8 x 25mm Screws M8 x 30mm Screws

M8 x 35mm Screws M8 x 40mm Screws

M8 x 45mm Screws M8 x 50mm Screws

Spacers & Washers

FIT FOR ANY TV AND TV MOUNT

MD5756 TV screws hardware kit is compatible with every brand of TV mount and TV. It comes with M4, M5, M6, M8 TV screws and spacers. 99 PCS TV mounting hardware. You can have it all in a organizer box.

BONUS IN PACKAGE

We got those necessary tools for your TV mounting installation.

• Philips Screwdriver*1
• Pencil*1
• Bubble Level *1

NO MORE RUSH TO HARDWARE STORE

Works with whatever TV you've got. Your TV mounting game will be easier. Universal kit ensures compatibility for TVs up to 82".