13 best digital satellite finder

Product description

The digital satellite finder is microprocessor controlled, making it very reliable and accurate. Signal strength is presented graphically on the LCD display in form of thermometer-scale and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on a buzzer. The digital satfinder is very sensitive and can detect the weakest of signals, strong incoming signals (powerful satellite, big dishes) can easily be attenuated for better readout.



Features:

【Compact Size】Portable satellite for directv is desinged in mini size and light weight(3.08oz). A sat finder you can really carry arround.

【Bzuzzer & ATT Function】With buzzer and attenuation (ATT) function, signal strength meter will have pitch tones (a higher tone for a stroner signal) on a buzzer. Come with a compass for easier and quicker tuning.

【Bright Backlight】LCD display with bright LED backlit graphically shows the satellite signal strengths. Thermometer-scale and in numbers (0-99).

【How To Track】Connect to your LNB and receiver to the strength finder tv antenna to track the clearest setting for the satellites you wish to tune to.

【No Batteries Needed】The external power supply or batteries , power supplied from your satellite receiver.



Specifications:

Material: ABS

Impedance: 75Ω

Gain: ≥10dB

Power Supply: DC13-18V

Frequency Range: 950-2150MHz

Input Level Range: -40~-10dBm

Operating Range: 52-60dB

Operating Temperature: 0-40℃

Item Size: 13 * 6.5 * 2.7cm / 5.12 * 2.56 * 1.06in

Item Weight: 87g / 3.08oz

Package Weight: 145g/ 5.14oz

Package Size: 16.5 * 10.5 * 5.5cm / 6.49 * 4.13 * 2.16in



Package List:

1 * Satellite Finder

1 * User Manual (English)

• 【Compact Size】Portable satellite for directv is desinged in mini size and light weight(3.08oz). A sat finder you can really carry arround.
• 【Bzuzzer & ATT Function】With buzzer and attenuation (ATT) function, signal strength meter will have pitch tones (a higher tone for a stroner signal) on a buzzer. Come with a compass for easier and quicker tuning.
• 【Bright Backlight】LCD display with bright LED backlit graphically shows the satellite signal strengths. Thermometer-scale and in numbers (0-99).
• 【How To Track】Connect satellite finders to your LNB and receiver to the strength finder tv antenna to track the clearest setting for the satellites you wish to tune to.
• 【No Batteries Needed】The external power supply or batteries, power supplied from your satellite receiver.

User questions & answers

Question:	Can i use this for dish network
Answer:	No. This didn't work at all! Save your money.
Question:	Could this measure FM radio signals
Answer:	It didn't show anything for me.

Product description

Description:

Very powerful Digital Satellite Signal Meter Finder which is able to find satellites in a very quick way about within 15 minutes if no accident. It is very lightweighted and compact,very convenient to use.Anti-corrosion connectors also make sure long time use and it is very worthy of trying.



Specification:

Input Frequency: 950-2150 MHz

Input Level Min: -40dBm

Input Level Max: -10dBm

Input Impedance: 75Ω, F connector

Output Impedance: 75Ω, F connector

Power Supply: DC 13/18 V

Operating Range (LNB gain): 52-60dB



Package Included:

1* Instructions

1* Digital Satellite Signal Meter Finder

1* Compass for free



Q &A:

1. how to install the satelite finder and detect the signal?

a. Connect a jump cable from LNB to the satellite finder's "Satellite" port. Connect the "Receiver" port, a DC 1318V power which comes from the satellite receiver

b. Make sure that the satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver

c. Set the dB to be 1 or 2 by ATT button, the signal LED will show from 15 to 30, then you can adjust the dish postition, when you hear the buzzer alert and the value of signal strength getting more and more, it means you get the statellite signal

d. Set the dB to be 3 or 4, adjust the dish again and again until the value of the signal strength is maximum. Then you can see the LOCK light in the satellite receiver, if the lock light is lighting it shows you find the desired satellite. Otherwise you need to adjust the dish again

• High quality component. Anti-corrosion connectors
• Built-in amplifier compensates insertion loss
• Sensitive meter for in-line use; pocket size and light weight
• With electronic buzzer. Easy operation, attenuation, audio tone and back light
• Powered by the receiver, nice tool for campers. PS: work great with directv hd swim signal; it uses 2X1.5v lithium batteries

User questions & answers

Question:	Does this meter work on both dish network
Answer:	yes it does and it works real well in locating the sat that you want respectfully Ralph
Question:	will this work with directtv swm satellite
Answer:	It works with Dish and says it will work with Direct also, it is just a signal strength meter. It has to have the receiver on for power but I did not like that so I took two 9volt batteries and an F type connector and made my own 18volt power supply. Works just fine.
Question:	Rm 4610 can this be upgraded to hd for directv
Answer:	Don't know bout an upgrad but my experience with the signal meter is save your money. My burned out just using it once. When I tried to use again it was over the 1 month warranty.
Question:	If the dis has no power, is this item working properly? Thanks
Answer:	If you are using this for dish pointing you need a compass to get the direction. You should be able to get this info from your unit by entering the closest zip code in to your sat box. If you are using your sat. on a camper you can get a zip code directory at any office store. Now that you have your zip code enter it in the setup in your sat box setup program. Point the dish using your compass this will get you in the rite direction.You must us a one foot peace of the same type cable between the dish and signal meter. Then connect the cable to the other side going to the sat box. The power comes from the dish signal. So you have the dish, a 1 or 2 foot jumper cable (short piece cable) between the dish and line in on the signal box, the signal box, then connect the cable from the dish box tuner box that is used to change channels to the out side of the signal meter. Now all you have to do is rase the dish until you get a signal. If the signal is to strong back the signal down on the meter for fine tuning it. You don't want the signal to strong. Make it as week as you can well still getting a signal. This will help you pin point the sat. Now once you have it tuned in. lock the dish in place. Remove the short cable and signal box and connect the cable from the sat box and you are done. I hope this helps.

Product description

Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satellite finder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout .

Please kindly follow the below steps:

1. Connect the item with power supply. Then it will show 0%.

2. Disconnect LNB and rotate the button till the end (clockwise) in the bottom right corner.

3. Press "ATT+" & "ATT-" buttons to check if the signal will change accordingly. If the signal will change, that mean the item is in good condition and please kindly install the item following the manual.

Specifications:

Material: Plastic

Impedance: 75Ω

Gain: ≥10dB

Power Supply: DC13-18V

Frequency Range: 950-2150MHz

Input Level Range: -40~-10dBm

Operating Range: 52-60dB

Operating Temperature: 0-40℃

Item Size: 13 * 6.5 * 2.7cm / 5.12 * 2.56 * 1.06in

Item Weight: 87g / 3.08oz

Package Weight: 145g/ 5.14oz

Package Size: 16.5 * 10.5 * 5.5cm / 6.49 * 4.13 * 2.16in

Package Included:

1* Instructions

1* DIGITAL SATELLITE SIGNAL METER FINDER

• High Quality Component: and professional design; Designed with a compass for easier and quicker tuning. Powered by the receiver, nice tool for campers.
• Less Signal Loss:Built-in amplifier compensates insertion loss.We offer one year warranty and 24 hours customers survice~
• Useful Tool|:Connect to your LNB and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.
• Easy To Use:With electronic buzzer, easy operation, audio tone and LCD display with backlight to show the satellite signal intensity.
• No External Power or batteries required: power supplied from your satellite receiver.

User questions & answers

Question:	Will this work for Orby
Answer:	Have no idea. Suggest you contact Orby and ask them.
Question:	does this work with air tv
Answer:	Yes, it can. If you have any questions please email to our customer srevice [email protected]
Question:	Mr. seller I need to clarify a question, I want to know if this finder helps me to locate the directv signal
Answer:	I used it for Dish Network. It worked. Directv I dont know
Question:	Does this work with Directv dishes
Answer:	yes it dose

Product description

The SF-95DR digital satellite finder is microprocessor controlled, making it very reliable and accurate. Compatible with DirecTV, Dish Network, and Free-to-Air satellite Systems. Features an LCD display with optional backlight that displays signal strength graphically. An optional audible buzzer provides pitch tones for accuracy (the higher the tone, the better the signal). Features an LNB connecting port and receiver connecting port. Input Frequency 950-2150 MHz Input Level Min: -40 dB, Input Level Max: -10 dB. Operating Range (LNB gain) 52~60dB. Instruction manual and a 5 inch coaxial cable are included.

User questions & answers

Question:	I am living in st.kitts and need to know if i purchase this dish out of trinidad if it would work here
Answer:	yes it works good on dish and DirecTV.
Question:	Is this meter SWM compatible
Answer:	It will work but you need an ASL-1 (around $50) to connect it to a SWM setup. It won't work to peak your signals if you try to connect it directly inline between the dish and the receiver.
Question:	what is ment by LNB
Answer:	The abbreviation LNB stands for Low Noise Block. It is the device on the front of a satellite dish that receives the very low level microwave signal from the satellite, amplifies it, changes the signals to a lower frequency band and sends them down the cable to the indoor receiver.
Question:	Will this device work with OTA UHF/VHF antennas used on RV's prior to scanning for channels
Answer:	I think not. It's a totally different type of signal with different carrier charactaristics. There are meters made for this purpose however. Please see http://www.amazon.com/King-Controls-SL1000-SureLock-Digital/dp/B0045E3MHK/ref=sr_1_1?ie=UTF8&qid=1405172114&sr=8-1&keywords=antenna+signal+meter

Product description

It is a kind of simple instrument which used for satellite receiving antenna's installation and adjustment , it can adjust the direction of antenna, feed location and as indicators of the project such as polarization Angle, make the position of the antenna to achieve the best.



Specifications:

Color: black, yellow (optional)

System capabilities: full HD DVB-S/S-2 complian, fully DVB compliant

PAL/NTSC: automatic PAL/NTSC conversion

Channels number: 6000 channels TV and Radio programmable

Favorites: 8 different favorite groups selection

OSD Language: English\German\French\Portuguese\Spanish\Italian\Russian\Turkish\Polish\Arabic\Farsi\Espanol\Deutsch

OSD color: 16-bit OSD with anti-flickering

Channel search: channel search in automatic, manual and network search

Channel edit: various channel editing function

Battery: Li-ion 3000mAh

Power supply: DC12V/1500mAh  (Input 100V-240V, 50/60Hz)

Item size: 15.9 * 9.4 * 4.4cm / 6.26 * 3.70 * 1.73in

Item weight: 431g / 0.95lb

Package size: 20.5 * 18 * 6cm / 8.07 * 7.09 * 2.36in

Package weight: 850g / 1.87lb



Package list:

1 * Digital Satellite Meter

1 * Power Adapter

1 * AV Cable

1 * Car Chargeing Cable

1 * Carrying Bag

1 * User Manual

• ❤❤【DVB compliant】:supports DVB-S / S2 / S2X signal measurement, H.264 multi-standard demodulation and decoding. It can watch satellite channels in real time and view the channel list list. It is easier and more intuitive to view satellite signals and quickly configure satellite antennas.
• ❤❤❤【Large color screen】3.5 inch LCD Color screen.The V8 satellite finder has a 3.5-inch LCD color screen and a 16-bit OSD with anti-flicker function.
• ❤❤❤【Easy to use】Plug and Play installation, with an easy to use menu system.A useful outdoor signal detector for TV satellite antennas, When searching for satellites, a beep sounds for signal prompts. The stronger the signal, the quicker the sound.
• ❤❤❤【High performance】Lithium-ion 3000mA battery, normal work up to 4 hours.Support LNB short-circuit protection, safe and secure to use.
• ❤❤❤【Support functions】Support AV in and AV/HD out function, 13V / 18V / LOCK status panel LED display directly and battery power display.

User questions & answers

Question:	Will this work with cband and ku band digital and analog signals
Answer:	Yes
Question:	Do you have a satellite list for this device ?, how do you update the satellites ?. Thanks
Answer:	You can do it manually or depending the Brand they may have a update software with all your satellite lists
Question:	Will it find Orby tv satellite
Answer:	It will find satellite EUTELSAT 117 West BUT the orby channels are encrypted. They're not FTA channels.
Question:	Does it tell you the cnstellation (8psk, 16qam
Answer:	Not really is more base on frequency For example you can have it lined up on galaxy 19 in the scanner but it all depends on the frequency you set the scanner . Because some satellite are sending same frequency you may thinks is galaxy 19 but it can be 117w or 97 w it al denpent your may have to do more resources online on it am still new on this

Product features

Specifications：

System capabilities: full HD DVB-S/S-2 complian, fully DVB compliant

PAL/NTSC: automatic PAL/NTSC conversion

Favorites: 8 different favorite groups selection

OSD Language: English\German\French\Portuguese\Spanish\Italian\Russian\Turkish\Polish\Arabic\Farsi\Espanol\Deutsch

OSD color: 16-bit OSD with anti-flickering

Channels：

Channels number: 6000 channels TV and Radio programmable

Channel search: channel search in automatic, manual and network search

Channel edit: various channel editing function

Battery: Li-ion 3000mAh

Power supply: DC12V/1500mAh (Input 100V-240V, 50/60Hz)

Size & weight：

Color: Black

Item size: 15.9 * 9.4 * 4.4cm / 6.26 * 3.70 * 1.73in

Item weight: 431g / 0.95lb

Package size: 20.5 * 18 * 6cm / 8.07 * 7.09 * 2.36in

Package weight: 850g / 1.87lb

KKmoon DVB-S2 V8 Finder：

Fully DVB compliant, live FTA digital picture and sound.

3.5 inch LCD Color screen.

Lithium-ion 3000mA battery, normal work up to 4 hours.

Support AV in and AV/HD out function, 13V / 18V / LOCK status panel LED display directly and battery power display.

Plug and Play installation, with an easy to use menu system.

Package list：

1 * Digital Satellite Meter

1 * Power Adapter

1 * AV Cable

1 * Car Chargeing Cable

1 * Carrying Bag

1 * User Manual

• Digital meter for signal strength and quality. 7.4V/800mAh Li-Ion Battery Included.
• Sound and Light Alarm for Locking Signal. Auto Calculate Angle of AZ ,EL.
• Supports DISEQC 1.0/1.1 ,0/22khz Tone. Beep Integrated. LNB short protect.
• Support mechanical compass.
• Software upgrade via USB port, Easy to carry.

Product features

Description:

Item type:satellite finder 2.1 Inch LCD Screen Display Input Frequency 950~2150MHz Input Level -65~ -25dBm Input Impedance 75 ohm Measurement Type : signal strength,quality;ber;pwr Sound for Locking Signal Support DISEQC 1.0 /1.1 and 22khz Tone LNB Power Supply : 18/13V(IMax 300mA) Beep Integrated 7.4V/800mAh Lion Battery Included Max Operating Time : 3 hours 12V/1.2A DC Adapter USB Port For Software Upgrades

Package Include:

1 x WS-6933 Satellite Finder 1 x USB upgrade cable 1 x AC adapter 1 x Manual

Product description

Description:

1.Measurements of DVB-S/S2/S2X signals, H.265 Hardware decoding;

2.Digital satellite finder meter for quick setup of satellite dishes,

3.3.5 Inch High Definition LCD Screen,

4. Li-Ion battery (7.4 V /3000 mAh) for up to 4-hour operating time.

5.Support AV in and AV/HDMI out function,

6.Support 13V / 18V / LOCK status panel LED display directly,

7.Support for DiSEqC1.0/1.1/1.2/USALSand 22 kHz Tone

8. LNB short circuit protection

9.Support battery power display,

10.Technical support website:www.freesat.cn



Standard:

System capabilities: DVB-S/S2/S2X system standard:ETS 302 307

LNB Input:

Connector: F type, male

Frequency range: 950MHZ-2150MHZ

Input Impedance: 75Ω

Input Signal level: -65dBm~-25dBm(average power)

Active Ant Power: 13/18V DC @ 400mA MAX,Overload Protection

DiSEqC: DiSEqC1.0/1.1/1.2/USALS Motor fully support

LNB switch control: 22K

Demodulator:

Front end: QPSK, 8PSK

Symbol rate: 2Mbps~45Mbps

SCPC and MCPC Capable: Yes

Spectral inversion: Auto conversion

Sortware Features:

OSD Language: OSD Multi-language for options (English\ German\ French\ Portuguese\ Spanish\ Italian\ Russian\ Turkish\ Polish\ Arabic \ Farsi\ Espanol\ Deutsch)

Channel Search: Channel search in automatic, manual and network search

Easy Menu: Plug and Play installation, with an easy to use Menu System

PAL/NTSC: Automatic PAL/NTSC conversion, and 4:3 or 16:9 display form

SoftUpgrade: Software upgrade through USB



Package Included:

1 × Digital satellite meter

1 × Adapter

1 × AV cable

1 × Car charger cable

1 × Carrying bag &strap of carrying bag

1 × User Manual

• 【Gold Version New upgrade】V8 Satellite Finder Meter support measurements of DVB-S/S2/S2X signals, H.265 Hardware decoding. Support for DiSEqC1.0/1.1/1.2/USALSand 22 kHz Tone. LNB short circuit protection. V8 Satellite Finder have 3.5-inch LCD color screen, 16-bit OSD with anti-flicker function.
• 【Suitable for Novice】It is a useful TV Antenna Outdoor Signal Detector for beginners and suitable for the adjustment and installation of dish. Some satellites have been added to the machine, and users can also add many favorite satellite by themselves. With this finder, you can set and align a satellite dish quickly, easily and accurately.
• 【Full Satellite Selection】SAT digital locator. Support full satellite selection. Fast channel blind scan. DVB-S/S2/S2X TV Satellite Signal Finder Multi standard demodulation & decoding. And H.265 Hardware decoding.
• 【High Performance】Lithium-ion 3000mA Battery，Normal work up to 4 hours. support battery level display. The red flashing is charging, and the green steady light means full charge.

User questions & answers

Question:	Can this device detect both dish network and directv satellites
Answer:	Anything with a satellite signal is fine.
Question:	Can I connect directly to the satellite dish with coax cable to align the dish
Answer:	Yes you can. It's essentially a battery powered sat receiver and monitor. Also supports motorized dishes and blind scan. You can actually watch sat tv on your roof with only a direct connection to the LNB.

Product description

Specification:

Size: 6.1*3.74*1.7 Inch

Weight: 0.5 KG

Output Interface: LNB IN/DV OUT/AV OUT/AV IN/USB/Power Input

HDMI: 1080P HDMI Output

PAL/NTSC: Automatic PAL/NTSC conversion

OSD Language: EnglishGermanFrenchPortugueseSpanishItalian etc.

OSD Color 16-bit OSD with anti-flickering

Channel Edit Function: Favorite/Move/Lock/Skip/Delete etc.

Power Supply: DC12V/1500mA (Input 100V-240V, 50/60Hz)

LNB/Tuner Input: Connector F type

Frequency Range 950MHz-2150MHz

Signal lever -65dBm~-25dBm

Active Ant Power: 13/18V DC@400mA Max(Overload Protection)

DiSEqC Ver 1.0/1.1/1.2

Front end QPSK(S): QPSK,8PSK,16APSK,32APSK(S2)

Modulation Range: 2Mbps-45Mbps

SCPC and MCPC Capable: Yes

Spectral inversion Auto conversion



Package includes:

1* Digital Satellite Meter

1* User Manual

1* AV Cable

1* Car Charger Cable

1* Adapter

1* Carrying Bag

• [PROFESSIONAL FINDER]- -Install and align a dish satellite antenna quickly, easily and accurately with the hd antenna signal meter and humanized interface. It supportes multiple code such as AC-3, MPEG-2 MP@HL, H.264 BP [email protected], AVS [email protected]/4.0/2.0, plus Fully DVB-S/S2.
• [ABUNDANT FUNCTIONS]- -Multiple TP detection,automatic save for last channel and sound & light alarm for locking signal are integrated in satalite signal meter, plus channel search in automatic, manual and network search, making it a multifunctioanal tool for you.
• [HUMANIZED INTERFACE]- -TP setting, TP Controlling and Auto DiSEqC function in the installation menu of our tv antenna signal meter. And when turned on, channel picture, signal status will display on 3.5 inch LCD screen after inputting local DVB-S/S2 parameter. Meanwhile, you can select big menu window for data figure which is helpful during usage
• [GREAT SCALABILITY]- -The DTV antenna signal meter provides LNB IN, DV OUT, AV OUT, AV IN, USB, power supply and 1080P HDMI output, plus its portability and 3000mAh Lithium battery which works for more than 4 hours after fully charged. So suitable for various occasions of your home, motorhome, camping in the wild or remote areas.
• [EASY TO UPGRADE]- -Sofeware can be upgraded through USB port to give you a better experience and enjoy more than 6000 channels TV and Radio programmable.

Product description

The SKY24019 Analog Satellite Finder with Tone makes tuning C-band, Ku-band, and even Digital a breeze. You'll be amazed at how easy it is to precisely align your dish so you can send the strongest signal to your receiver. Make sure you get the finest picture while saving money on expensive service calls. It features a high sensitive audio tone function, and is pocket sized – a lightweight and inexpensive way to tune in a satellite dish. The unit is equipped with a meter and features a tone that changes as the signal strength increases. Finally, it is powered directly by the satellite receiver.

• Makes tuning C-band, Ku-band, and Digital a breeze
• Precisely align your dish so the strongest signal is sent to your receiver
• Attain the finest picture while saving money on calling out a tech to do it for you
• High sensitive tone function – tone changes as the signal strength increases
• Equipped with meter to display dbu | Powered directly via satellite receiver | Compact, pocket-sized design

User questions & answers

Question:	Does it work on HD hopper
Answer:	Not sure which HD hopper you are referring to. Mine stopped working shortly after I installed it. I now have a SatHero SH200 which I'm struggling with to get it online (cause it's complicated & from China & unclean. Sorry for no help here for you. b.p.
Question:	Unit does not power on
Answer:	no! it needs an external power source. either a battery pack? or a receiver. ie Directv receiver H24 and below a genie HR54 or dish network receiver or a battery pack to start up LNB
Question:	Does this device work with directv swm system
Answer:	I do not see why not!
Question:	Does this work with dish network
Answer:	Yes. Dish is what I have.

Product description

Highlight:

1.Measurements of DVB-S/S2/S2X signals, H.264 Hardware decoding;

2.Digital satellite finder meter for quick setup of satellite dishes,

3.3.5 Inch High Definition LCD Screen,

4. Li-Ion battery (7.4 V /3000 mAh) for up to 4-hour operating time.

5.Support AV in and AV/HDMI out function,

6.Support 13V / 18V / LOCK status panel LED display directly,

7.Support for DiSEqC1.0/1.1/1.2/USALSand 22 kHz Tone

8. LNB short circuit protection

9.Support battery power display

Accessories:

1 × Digital satellite meter,

1 × Adapter,

1 × AV cable,

1 × Car charger cable,

1 × Carrying bag 8.strap of carrying bag,

1 × User Manual

Standard:

System capabilities: DVB-S/S2/S2X system standard:ETS 302 307

LNB Input:

Connector: F type, male

Frequency range: 950MHZ-2150MHZ

Input Impedance: 75Ω

Input Signal level: -65dBm~-25dBm(average power)

Active Ant Power: 13/18V DC @ 400mA MAX,Overload Protection

DiSEqC: DiSEqC1.0/1.1/1.2/USALS Motor fully support

LNB switch control: 22K

Demodulator:

Front end: QPSK, 8PSK

Symbol rate: 2Mbps~45Mbps

SCPC and MCPC Capable: Yes

Spectral inversion: Auto conversion

Sortware Features:

OSD Language: OSD Multi-language for options (English\ German\ French\ Portuguese\ Spanish\ Italian\ Russian\ Turkish\ Polish\ Arabic \ Farsi\ Espanol\ Deutsch)

Channel Search: Channel search in automatic, manual and network search

Easy Menu: Plug and Play installation, with an easy to use Menu System

PAL/NTSC: Automatic PAL/NTSC conversion, and 4:3 or 16:9 display form

SoftUpgrade: Software upgrade through USB

• 🥰【3.5-inch LCD screen】The newly upgraded golden version of the V8 satellite finder supports DVB-S / S2 / S2X signal measurement, H.264 multi-standard demodulation and decoding. The V8 satellite finder has a 3.5-inch LCD color screen and a 16-bit OSD with anti-flicker function. It can watch satellite channels in real time and view the channel list list. It is easier and more intuitive to view satellite signals and quickly configure satellite antennas.
• 🥰【Search all satellites】SAT digital locator. Supports complete satellite selection and fast blind scan. Built-in part of the European satellite list, you can directly select search. It also supports users to manually add satellite lists to quickly search for satellites that users want to locate. Supports DiSEqC1.0 / 1.1 / 1.2 / USALS and 22 kHz tones.
• 🥰【High performance】 Lithium-ion 3000mA battery can work normally for up to 4 hours. Support battery power display. Blinking red means charging, and steady green means it is fully charged. Support LNB short-circuit protection, safe and secure to use.
• 🥰【Beginners are also suitable】V8 FINDER METER is a useful outdoor signal detector for TV satellite antennas, suitable for the adjustment and installation of satellite parabolic pans. When searching for satellites, a beep sounds for signal prompts. The stronger the signal, the quicker the sound. If you have any questions about operation, please feel free to contact me.
• 🥰【Professional after-sales service】GTmedia official shop, providing professional after-sales service. If you have any questions, please contact me.

User questions & answers

Question:	Will this work to find and align to eutelsat 9b (AFN
Answer:	Yes,it is work with it.
Question:	Can this work in Ghana? Please need your reply
Answer:	Hi, of course you can, no matter where you are, as long as the satellite is in C-band or KU-band.
Question:	Can it work in Nigeria
Answer:	yes sure its work
Question:	does this work in the usa? I order another and it only worked in Europe...i need to point a dish network sat...is this the item
Answer:	It works very well in the USA. Start at dishfinder.com to identify the longitudes of the satellites you want. Add a couple on each side. Enter the menu system of the V8. Delete as many satellites from the arc as you want to enter; then enter the names and longitudes of the satellites you want. Since dish network uses a scrambled signal you will not see a picture on the display, but you will capture signal strength, and be able to lock it in.

Product description

"

Specifications: 

Type: Satellite Finder 

Quantity: 1PC 

Material:Plastic 

Color:Black 

Power: DC 13-18V 

Built-in LED and Buzzer: 0Hz, 22 KHz, 13 V, 18 V 

Input Frequency: 950-2150 MHz 

Max Input Level: - 10dBm 

Entry Level Min: 40dBm 

Size: 80*35*62mm/3.1*1.4*2.4†(L*W*H) 

Net Weight: 125.0g/4.4oz 

"

• [Excellent Sensitivity]DVB-T Signal Finder TV Antenna more convenient meter to locate the satellite signal. Feedback numbers shows the strength of the signal intuitively.
• [EASY SATELLITE FINDER METER]Easy tuning for C-band, Ku-band, and Digital for peak signal.
• [FREQUENCY RANGE]A sat tv meter with .95GHz - 2.15GHz / 0.2 dB difference in 950 - 2150MHz range.
• [Great for Remote Satellite Antennas]Elegant exterior and convenient to carry.
• [ACCURACY GUARANTEED]Precisely align your Satellite dish meter for the strongest signal.

Product description

Specifications:

Frequency range: 950-2150MHz

Supply voltage: 13-18V DC

Input level range: -40dBm ~ -10dBm

Operating temperature: 0-40

Impedance: 75O

Use LCD to display the intensity of the satellite signal

Built-in signal alarm buzzer

With LCD backlight / buzzer and damping control function

DC passage to LNB



Package Includes:

1 x SAT FINDER

1 x instruction manual

• It automatically detects the LNBF frequency and works with any C-band, Ku-band or Ka-band satellite. No entry of the transponder frequency, symbol rate or polarity. Really plug and play.
• The measuring device is extremely simple and convenient to use. Device for setting the optimal level of the signal received by a satellite dish.
• Digital LCD display with backlight and acoustic signal generator
• suitable for optimal alignment / adjustment of digital and analog satellite systems
• Sensitivity setting adjustable via level control

Product description

Features:

Works with the multiple dish systems.

Connect your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.

Mini size and light weight, really portable.

Built-in signal alert buzzer.

LED digital display the strength of the signal clearly.



Specifications:

Material: ABS

Frequency Range: 950-2150MHz  

Input Level Range: -40~-10dBm

Impedance: 75Ω

Gain: ≥10dB

Power Supply: DC13-18V

Operating Temperature: 0-40℃

Item Size: 11 * 5.1 * 2.4cm / 4.33 * 2.01 * 0.94in

Item Weight: 53g / 1.88oz

Package Weight: 85g/ 2.99oz

Package Size: 14.2 * 8.3 * 2.8cm / 5.59 * 3.27 * 1.10in



Package List:

1 * Satellite Finder

1 * User Manual (English)

• Works with the multiple dish systems.
• Connect your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.
• Mini size and light weight, really portable.
• Built-in signal alert buzzer.
• LED digital display the strength of the signal clearly.