10 best receiver with irs

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

• BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
• IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
• COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.



You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.



Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.



Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.



Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!



Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!



Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

 

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video



Specs



• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

 

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.



Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.



Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

Product description

Infrared External Receiver for Verizon FiOS cable boxes. Simple plug and play. Plugs directly into the IR IN port on the back of the cable box. The IR receiver mounts on or near your TV . It will work with QIP7000 series, VMS1100, IPC1100,,IPC4100CHS335,CHS435, DTA271, DTA50 etc. Will not work. QIP2500 or QIP6000 series, SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box , AV Stereo receivers, IR Connecting block Repeater kits, or TV sets. Copyright 2017 Infrared Resources LLC All rights reserved

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the box is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot. All units are bench tested and working before leaving the factory.
• COMPATIBLE with Verizon Fios Cable boxes model QIP 7000 series, CHS335 and 435, IPC1100 and 4100 with SA 4000HDC series,4200/HDC,4240,4250, VMS1100,DTA271, DTA50 etc.
• NOT COMPATIBLE WITH HDC,8300/HD,8240/8260HDC box, (or port on the back of any box stating Serial). Uverse , A/V Stereo Receivers, IR Repeater connecting blocks, or Smart TV's
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43in tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• Operating distance 38kHz up to 40 feet, 56kHz up to 25 feet.25 years experience manufacturing for the Hotel and Cable industry.

User questions & answers

Question:	By using an IR Receiver, do i still need to have an hdmi cable running between my tv and cable box
Answer:	The device has nothing to do with and does not interface with the HDMI cable which I assume you are using to transmit the video signal from the STB/receiver to the TV/Video output device. So if you want to TV to both change channels/volume AND show a picture, you will need the device AND the HDMI cable. Or, you can replace both of them with a Stargate PN25 flux capacitor running at 25 to30 MHz through any model Magic Bullet.
Question:	Will this work with Motorola DCX
Answer:	It didn't work with mine
Question:	Will it work for a Verizon Fios remote control P265v
Answer:	Please note that it does NOT work with all boxes that have an IR IN port. Mainly SA Explorer boxes. We do list compatible and non compatible boxes in the product description section. Check with us before you buy. [email protected]
Question:	Will this work with a Samsung 6350 TV and the Verizon QIP7232 box
Answer:	The TV model is irrelevant as long as your box is currently operating it correctly. As to the STB, your question is answered in the device's description: "It will work with QIP7000 series, VMS1100, IPC1100,CHS335,CHS435, all Verizon set top boxes except QIP2500 or QIP6000 series ."

Product description

This newly designed 38-56 kHz Wideband STB IR Receiver Extender is made and sold exclusively by Inteset Technologies. It will work with nearly all Cable Set Top Boxes and DVRs that have an active IR IN port. Previously you had to choose either the 38 kHz or the 56 kHz model. This product eliminates having to make that choice but it will not work with all A/V devices. Please check compatibility below.



This allows you to hide your STBs and DVRs behind closed doors in a cabinet or closet. The small receiver bud (1 1/4"L x 7/8"W x 5/8"H) will handle all of the same functions as if your device was out in the open. It comes with self stick tape on the back of the IR bud for easy installation. Be sure to mount the bud with a straight line-of-sight to your remote.



It will work with most Comcast Xfinity and Verizon FIOS boxes as well as other cable providers that use Arris, Cisco, Scientific Atlanta and Motorola boxes except those noted below.



It will NOT WORK with AT&T Uverse STBs, Motorola DCT or DCH Series, QIP2500, QIP6000 Series, DISH or DirectTV boxes. These models and some models specific to particular cable providers either do not have an IR IN port or that port is not active. The 4250 HDC is one of those. It also will NOT WORK with A/V Receivers, Amplifiers, TVs or IR Repeater Systems as the connectors are usually wired differently. If you have any questions about compatibility, contact us before you buy any extender.



If you have any questions or issues you can contact us at: "universalremotes.net"

• WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.
• 20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise
• Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote
• 6 ft shielded cable, 3.5 mini plated stereo plug. Tip-VCC 5V, Center-Data, Lower-Ground
• Works with all Universal Remotes and most Cable Boxes with an active IR IN jack

User questions & answers

Question:	Does this work with arris ipc1100 box
Answer:	A better choice is below but this will also work. https://www.amazon.com/dp/B00YFC2IQ8?ref=myi_title_dp
Question:	What is the length of the cords
Answer:	Cable is 6 feet but can be extended to over 50 feet with a standard extender cable.
Question:	Does this fit for charter spectrum box
Answer:	Hi, that is what I used it for (Charter Spectrum Cable Box). It works fine, but note that you should have the cable box pluged in and turned on before you install the IR receiver/extender into the IR port on the back of the cable box.
Question:	Will this work for Harmony hub
Answer:	This is a receiver and the Harmony hub doesn't have a IR Input port, so this isn't a product that can be used with Harmony. What you need is an emitter.

Product description

The BAFX Products Extra IR Receivers are designed to be used with the BAFX Products SINGLE ZONE IR Repeater & Remote Control Extender Kits. You can use these IR sensors to expand your kit to cover more rooms in your home allowing you to control all of our IR devices from multiple locations. Kids have the television turned up too loud at night? Install an extra IR receiver in your bedroom so you can turn it down without getting out of bed!

Just like our remote control extend kit, our IR receiver will work with all makes/models of IR remote controls & devices from Charter, Cisco, Harmon Kardon, LG, Logitech Harmony, Pioneer, Roku, Samsung, Scientific Atlanta, Spectrum, Time Warner, Uverse, Yamaha & more!

Have a Problem using this with any device? No worries! BAFX Products has helpful, friendly, USA based support staff ready and waiting to assist you. They are well versed in getting things up and running as quickly as possible so you can relax and enjoy your favorite TV shows!

Specs

Overall length: 5 Feet

Cable length: 4’

Dual band compatible

Plasma resistant

25’ Maximum sensing distance

Up 45° Remote control angle

NO HASSLE 1 Year manufacturer warranty against manufacturing defects!

• EXPAND – Increase & Expand the reach of your current Single Zone BAFX Products IR Remote Control Extender kit! Add more receivers to more rooms to control your cable box, receiver, media player and more from more locations in your home, office or business.
• FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology.
• COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!
• IMPORTANT – This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device.
• WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!

User questions & answers

Question:	Will this work with the bafx bafx
Answer:	this item comes with an 8 inch extension rod, and additional ones are available for purchase its part number 1234
Question:	How well will this work in sunlight
Answer:	We don't have an ex5260 to test but from look at an image of the bottom of the projector, it looks like it will work with our mounting hardware. If it doesn't you can return for a refund. Cheers - Michael
Question:	Will this work if installed behind an acoustically transparent projector screen
Answer:	The ALZO suspended Drop Ceiling projector mount allows for positioning the projector left/right and front/back to balance the weight so that the assembly will hang straight down from the ceiling.
Question:	What is the outer diameter of the body of the peephole IR receiver
Answer:	No. The drop bar is a fixed length pipe. The projector is always fixed at the same height.

Product description

The compact All-in-One IR System makes sure that all of your A/V components receive the commands sent from your existing IR remote controls, even without line-of-sight access. A small receiver can be placed near your television or mounted somewhere around your equipment cabinet, and this system will deliver your commands to up to 12 individual home theater components. It's easy - This home theater accessory is so easy to use; it sets up in minutes and requires no drilling or rewiring. Your friends will think you had a pro install it!

• IR Repeater system allows you to Control Home Theater Components Located behind Cabinet Doors
• Included with the system is - IR Receiver ( 2 inches by 1/2 Inch ) ( 10ft Cable )
• Hidden IR Repeater Controler ( 3 1/2 Inches by 2 Inches )
• 2 dual IR emitters ( 10ft Cable )
• Power supply (6ft Cable ) and Instructions

User questions & answers

Question:	Does this work with the remotes that came with my devices (xfinity cable box, dvd player, etc)? or do i need to buy a special aftermarket remote
Answer:	Sorry, I don't know / I just checked the specs on my original charger and know it works for my phone . . . .
Question:	What is the product number for a longer ir receiver "bar" and if i understand, the (2) dual ir emitters, would handle 4 components
Answer:	No,The total output of the charger is 12w 5v/2.4a,but the max output of each port can reach 12w 5v/2.4a
Question:	Have a new wall-mounted 65" tv with the cable box and dvr in a closet about 25' away ; want to control tv and closet components by aiming at tv only
Answer:	The difference is the watts. The watts difference is for the difference in the types of devices you may plug into it. An ipad needs higher output thn an iPhone.
Question:	What is the max distance the equipment can be located
Answer:	No it cannot be hooked up to your 12v in the UTV. You can buy extra batteries and chargers if you want to keep a spare.

Product description

IR RECEIVER CABLE.(PRODUCT DESCRIPTION)

Do you need an IR receiver that works perfectly, and will help put your Comcast Cable Box or other STP boxes out of view? If yes then you need our IR extender cable!.

Our 38-56kHz IR receiver will help you hide your entertainment systems in a less obtrusive view byextending the infrared signal received from the remote control and relaying via the wire back to the set top box or cable box. You may now hide it from view in a closet, cabinet, behind a closed door, in another room and still able to control it with your IR remote control.

WHY TRUST US?

Check out the features of our IR Receiver Cable.

1.EASY TO SETUP AND USE:

Plug the cable into the IR input jack located at the back of the STP box, then place the IR sensor receiver within a direct line of sight from your remote control.

2.CLEAN LOOK:

IR Extender Cable helps you to establish a clean,uncluttered look with no wires or cables in sight.

3.WIDE COMPACTIBILITY:

works with a wide range of Infrared remote control devices with a range of 38-56kHz.

Package Content:

2 x IR Receiver Cable

• ★ PLUG AND PLAY–Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of the device.
• ★ UNIVERSAL COMPATIBILITY – Suitable for a broad range of 38-56kHzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes.
• ★ 10FT CABLE – 10 feet(3m) LongCable with 3.5mm plug allows you to extend the signal receiver to a suitable position.
• ★ CLEAN LOOK:Our IR Repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look.
• ★ FLEXIBLE+ RISK-FREE PURCHASE–You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!!

User questions & answers

Question:	Can this be used with a Xantech Connecting Block
Answer:	I dont believe so

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

• 10PCS VS1838B Infrared receiver and 10PCS 5mm 940nm IR infrared Emission Tube LED Lamp
• The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference.
• The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;
• Long service life, no red storm, high reliability
• Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.

User questions & answers

Question:	Would these work to trigger a servo when interrupted
Answer:	I do not know if it fits a Black and Decker I have the Worx one.
Question:	Does anyone know the operating current? I have the max current, but trying to see if I really need 100 mA
Answer:	The WORX WA0037 spool cap cover is designed to fit select WORX grass trimmers only.
Question:	Compatible with Bose
Answer:	Yes it will fit the WG119 perfectly.
Question:	Does anyone know where i can find the data sheet for the leds? forward voltage and max current
Answer:	I have the 118, it takes the WA 0007 which I buy through Amazon but Walmart also carries it an a smaller spool also.

Product features

Application (mainly for remote control)

• Audiovisual equipment (audio, TV, wireless microphone)
• Household appliances (air conditioning, electric fans, lighting)

• Other infrared products such as electronic toy remote control, infrared camera, infrared alarm, infrared temperature measurement.
• Suitable for players' own DIY products for simple communication and short-distance remote control.

Product description

Designed and sold Exclusively by Infrared Resources.Designed in the USA. 9 feet long with 3.5mm end plug. IR receiver is 38~56kHz

This compact (.53 x 1.12 × .43 ) 1/2 inch wide, 1 inch long and 1/2 inch tall. IR Receiver truly is universal. It works with ALL of the major Cable Set Top and DTA (Digital Transport Adapter) Boxes. Including VERIZON FiOS, Comcast, S/A Scientific Atlanta Explorer ,Except the box models listed below in the Will Not Work list.

Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.

NOTE: Not for use in TV (Smart) IR port. The IR port on TV monitors are IR OUT not IR IN

The front IR sensor on the Cable box will disable once the IR receiver is plugged in. RNG models front IR sensor does not disable.

Works With: Samsung STB SMT-H4372,Scientific Atlanta Explorer 46xxHDC Series, 9865HDC,8742HDC Explorer (with IR IN port on the back panel) Comcast X1 RNG Set Top Boxes VERIZION HD DVR QIP 7xxx series and VM1101 model Cisco CHS435HDC,CH335HDC HD DVR, LG LST-4600A HD PACE DC551P,DC55 PACE/ DC700X Apache. Comcast X1, RNG110, PACE/CiscoRNG150, RNG100, PACE TDC787X HD, PACE TDC 575D DVR, DC50X, DCH100, DCX3300, DCX3220e, DCX3400M, DCX700, DCX3416, DCX3425, DCX3432, DCX3501, DCX3600, MVIX 760 HD Media Player. DTA50,DTA250 and other DTA models

Will Not Work With: Motorola DCT or DCH Series, QIP2500, SA Explorer 4200, 4200HDC,4240 HDC4250,4250HD,8240HDC,8260HDC,8200 series 8300, 8300HD , Series,DC60xu. 2100DHCT, 3100DHCT,3250HD, Verizon QIP 6416-2 , 6000 series Motorola DCX3200-M, DCX3400, DCX3510M, DISH, Direct TV, AV STEREO RECEIVERS(Harmon Kardon etc) OR IR REPEATER SYSTEMS,or directly plugged into TV’s.

. All trademarks are the property of their respective owners.

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
• Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43i tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
• 25 Years Experience Manufacturing And Supplying The Cable And Hospitality Industry

User questions & answers

Question:	States it works with 9865hdc but is not. is this supposed to
Answer:	It should work. Try unplugging the power from the box for 30 seconds while keeping the IR receiver plugged in. The box will reboot.
Question:	Will this work with Cisco explorer 8640hdc
Answer:	when plugged into the IR port on the Cisco Explorer 8640hdc will the the IR on the front of the 8640 also still work?
Question:	Will this emitter work with an Xantech connecting block
Answer:	It will not work with Xantech. They have a different pin out and the block also requires 12v as ours is 5v. We do offer our IRP repeater kits if interested.
Question:	how it works? do I need to buy two? one goea do cable box and the other to the tv
Answer:	What is the cable box model number? You only nee one to plug into the IR IN port on the back of the box. The receiver is placed on or near the TV frame

• 【Support Full HD 1080p @60Hz, 2.4G/5G Wireless Transmission】 This wireless HDMI extender input/output resolution supports 480i / 576i ~ 1080P @ 50 / 60Hz, SVGA ~ WUXGA. We use the international common 2.4G/5G wireless dual-band transmission signal, so we can get faster transmission speed and stronger anti-interference ability. You’d better use 5G signal channel to get more stable and fast using experience.
• 【Wireless Transmit 100m 328ft, Can through Wall】 In an open field, this wireless hd sender HDMI wireless signal can up to 100m 328ft(line of sight), if through 1 wall the signal can transmit 10-20m/32ft-65ft. (NOTE: Do NOT install multiple kits in the same location as it may cause signal interference.)
• 【IR Remote Control, Plug and Play】Built in IR signal extension feature, you can control source device at the receiver. Imagine you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function. True Plug and Play, don’t need set up anything, don’t need download any driver, NO WIFI , NO messy cables.
• 【Low Latency, With Local Loop-out】There’s a delay/latency time (0.3 seconds or less) due to data compression between wireless transmitter and receiver, Not recommended for real-time applications, such as PC gaming. But the loop-out has a zero latency and can use for a local display. Wireless AV sender is the best choice for your office meeting church and home use.
• 【Support Many HDMI Devices, Signal Point to Point Transmit】 This wireless hd sender and receiver kit can work with most HDMI-equipped devices, including DVD,DVR,IPTV,CCTV blu-ray players, set-top boxes, cable/satellite boxes and computer systems. can’t support one sender many receivers,signal point-point transmit. and this wireless HDMI extender support free lifetime technical support and free 1 Year Manufacturer Warranty. Please feel free contact us if you need help, any email will reply in 24

Product features

100M/328FT HDMI WIRELESS EXTENDER KIT

Function & Features

1.Full HD 1080P Video and Perfect Audio Quality

Wireless hd sender delivers up to 1080p@50/60Hz,Perfect for connecting Gaming Consoles, Cable Set-top Boxes and Media Players.

2. Strong anti-interference Faster Transmission Speed

Wireless HDMI adopts smart 5GHz dual-band WIFI Wireless transmission schemes and having advantages of long transmission distance, no splash, no snow

3. Wirelessly Transmit Up to 328ft/100m,Through Wall/Floor up to 65ft

Wireless HDMI extender can transmit HDMI signal no need wiring plug and play. Can transmit HD signal up to 328 feet away in line of sight; can work through walls and floors up to 65ft

4. Built-in IR remote control With HDMI Loop-out

This wireless transmitter and receiver supports IR Remote controller, you can control signal source equipment at the receiver. HDM Loop-out has a zero latency and can use for a local display.

5. Used for Home Theater Office Meeting Project Church

Can use at home,such as you and your family can share the same TV view in different room. Can use at office or church wireless long distance transmission.

6. Standard Accessories

1 x Transmitter, 1 x Receiver, 2 x Power Adaptor, 2x IR Extender Cable, 1 x User Manual

Support 1080P FULL HD

This wireless HDMI extender input/output resolution supports 480i / 576i ~ 1080P @ 50 / 60Hz, SVGA ~ WUXGA, you can enjoy a HD view

Support Penetrate Wall

If you need to transmit signal through walls in your case, please be kindly informed that it is easy passing through glass or wood wall, but you should keep both device stay within 10m/30t in the case of concrete wall.

Support Long Distance Transmit

In an open field, this wireless hd sender HDMI wireless signal can up to 100m 328ft(line of sight),

it can widely used in office, church, meeting.

Package Inlcude

1 Transmitter

1 Receiver

2 IR Cabel

2 Power Adapter

1 Uer Manual

(No Remote in Package)

Support 2.4GHz and 5GHz, fast transmit

Support 2.4G/5G wireless dual-band transmission signal, so can get faster transmission speed and stronger anti-interference ability. You’d better use 5G signal channel to get more stable and fast using experience.

Support IR Remote and HDMI Loop-out

Support Many HDMI Devices, Signal Point to Point Transmit. The HDMI loop-out has a zero latency can use for a local display. IR remote allow you control source device at the receiver.