12 best recessed wall outlet

Product description

The Leviton recessed boxes install invisibly behind wall units, wall mounted flat panel TVs, monitors and signature artwork. They are perfect for homes, apartments, co ops, condominiums and offices. 15 Amp 1 Gang Recessed Duplex Receptacle, Residential Grade, with Screws Mounted to Housing, White.

From the Manufacturer

Take advantage of soaring sales for flat screen TVs with Leviton's recessed devices. They offer flawless, flush-mounted installation that's unobtrusive behind today's TVs, monitors and entertainment centers. The recessed single-gang receptacle supplies AC power to two components, such as a flat panel TV and video receiver. The Leviton recessed boxes install invisibly behind wall units, wall-mounted flat panel TVs, monitors and signature artwork. They are perfect for homes, apartments, co-ops, condominiums and offices. 15 Amp 1-Gang Recessed Duplex Receptacle, Residential Grade, with Screws Mounted to Housing, White.

• Flush-mounted to install invisibly behind wall units, wall-mounted Flat Panel TVs and signature artwork
• Offers a UL approved, code-compliant solution providing 2 15A/125VAC NEMA 5-15R power outlets
• Supplies AC power for 2 components (flat panel TVs and video receiver)
• Perfect in homes, apartments, co-ops, condominiums and offices
• Fits most common electrical boxes
• Total Power Outlets : 2

User questions & answers

Question:	how important is it to have surge protection? are modern TVs less likely to be damaged due to built in protection
Answer:	MM is correct. Electrical code requires the 110/120Volt side of the box to be completely isolated from the low voltage side. A 2-gang box similar to the one pictured in the product's expanded description has to be used.
Question:	is this deeper than the cooper wiring one? meaning the plug wont stick out as much. thanks
Answer:	Yes it will work with aluminum, but you never mix aluminum and copper. Together they could potentially start a fire
Question:	Having an issue-- none of my plugs are fitting into the receptacle? There doesn't appear to be enough depth for the plug to be fully inserted. Thanks
Answer:	You can put oversized plate upon it. Decora is one whole unit.
Question:	what are the inside dimensions? width and height? Thank you
Answer:	Should work fine if you rough it up a little and prime it. Have fun with it.

Product features

Leviton 689-I 15 Amp 1-Gang Recessed Duplex Receptacle, Residential Grade

Description:

Take advantage of soaring sales for flat screenTVs with Leviton's Recessed Devices. They offer flawless, flush-mounted installation that's unobtrusive behind today's TVs, monitors and entertainment centers. The versatile Recessed Two-Gang Duplex Receptacle (Cat. No. 690)provides AC power and openings for six QuickPort modules you can tailor to support your customer's voice, data, video and audio needs. The Recessed One-Gang Receptacle (Cat. No. 689) supplies AC power to two components, such as a flat panel TV and video receiver. Available in White, Ivory, Light Almond and Black, Leviton Recessed Devices are the sleekest solution for home and office installations.

Product description

TOPGREENER TG15RD31 recessed duplex receptacle provides a solution for mounting flat screen TVs, A/V equipment, artwork, or entertainment consoles closer to walls. The receptacle is pre-attached to the polycarbonate thermoplastic frame which is also the finished wall plate. It features child-safe tamper-resistant shutters that comply with the 2011 National Electrical Code for TR receptacles. Power rating: 125VAC/ 15A.

• PROFESSIONAL LOOK: Recessed receptacles will allow flat screen TVs, A/V equipment, clocks, artwork, or entertainment consoles to be positioned closer to walls so your TV or other devices would have a professionally installed look
• RESCESSED DESIGN: Helps prevent cords from being accidentally snagged and unplugged. The durable recessed frame reduces or eliminates the protrusion of plugs. This will help prevent wire damage or prevent the inability to install an equipment at the location.
• HIGH QUALITY: Made of unbreakable polycarbonate thermoplastic material which provides durability and resilience to withstand hard impacts and heavy force
• TECHNOLOGY: Tamper-resistant receptacle is compliant with 2011 National Electrical Code (NEC) Article 406.12 and is ETL listed for quality and safety
• SPECIFICATIONS: 125VAC/ 15A. NEMA 5-15R outlets. 1-Year Warranty

User questions & answers

Question:	is this product UL certified and if so, why isn't there a UL mark on the product
Answer:	The actual cord is exactly 34”, then when you add the length of the elongated plug, it just over 3ft. Looks neat and clean. I love it.
Question:	Will this work with aluminum wiring
Answer:	yes
Question:	Does anyone have a recommended outlet box? This seems like a standard one wouldn’t be deep enough
Answer:	Not yet. Just White.
Question:	There’s no release port. How can you release the wires from the push-in connectors no ports, without having to cut wires to remove
Answer:	Not sure why they sat and his. I am using mine on a horizontal. M aybe because they are worried about tg wire being bent...not sure but it's working fine

Product features

Recessed Receptacle Size Overview

The standard size for a 1-gang recessed receptacle outlet from TOPGREENER is 4.48" height x 2.73" length. You can replace any standard size outlet with the TG15RD31.

Recessed Design

TOPGREENER recessed receptacle allows flat screen TVs, A/V equipment, artwork, or entertainment consoles to be positioned closer to walls.

Unbreakable Polycarbonate Thermoplastic

TOPGREENER recessed receptacles wall plates are made of unbreakable polycarbonate thermoplastic material, and can withstand bending, twisting, hard impacts, and drops.

Tamper-Resistant

TOPGREENER recessed receptacles feature TR shutter which prevents foreign objects from being inserted, but still allows easy insertion of proper plugs.

Matching Screws

TOPGREENER recessed receptacles come with matching screws that are painted to help achieve a flush mounted look.

Product description

Bryant provides multiple solutions for in-home av installations. With recessed plastic boxes and receptacles, low voltage cables and power cords are organized and protected. All wires stay hidden behind wall units and entertainment centers, allowing for a clean and flushed look. Products are offered in various color options to compliment or blend into any decor.

• Feed through BRUSH covered opening conceals, organizes and protects low voltage cables in A/V and multimedia installations
• Flush design fits behind wall mount flat panel TVs, A/V equipment, wall units/artwork/mounts
• Easily mounts to box with screws; use Bryant netSELECT RR1500 for economical solution
• Tamper-resistant duplex receptacle promotes safety and provides two 15A, 125V NEMA 5-15F power outlets
• UL Listed and CSA certified

User questions & answers

Question:	Will this fit in a 2 gang box that is already installed? The current fixture is decora with a light switch and a dual receptacle
Answer:	I actually had to use tape to get the covers to stay on the 2 I used... I threw the other 3 in the trash...
Question:	Will this work with aluminum wires
Answer:	You push to turn on and push to turn off. I accidentally left mine on for a couple of hours and it became dim and I had to replace the batteries. This particular one probably isn't the best if you want the light on constantly or for long periods of time. It isn't motion activated.
Question:	Can I replace the outlet with a different Decora outlet
Answer:	They meant cordless. There are no remotes, it is pressing on the light to turn it on.
Question:	has anyone tried to paint the outlet to match the wall? Curious how well the paint would adhere to the surface
Answer:	Over time, heat from the stove would degrade the adhesive. If you want the lights there permanently, I'd drill small holes through 2 edges of the the light, and secure it to the cabinet with screws. Either way you do it, you'll probably need to remove the lights when it's time to change the batteries. But it would be easy enough to remove the screws, change the batteries and then re-attach the lights. --These lights are bright, so you might only need one of them.

Product features

Bryant Electric

Bryant provides multiple solutions for in-home AV installations. With recessed plastic boxes and receptacles, low voltage cables and power cords are organized and protected. All wires stay hidden behind walls, televisions and entertainment centers, allowing for a clean and finished look. Products are offered in various color options to compliment or blend into any decor (ivory, light almond, and white).

Bryant Concealed Connections Provide For:

+ Organized and Hidden Wires.

+ 15 Amp, 125 Volt Tamper-Resistant Receptacles.

+ Simple Installations

Note: Recessed work boxes, data jacks and AV connectors sold separately.

Recessed 2-Gang Plastic Box

Bryant RR1500 thermoplastic, 21 inch cubic capacity economical plastic box for use with Bryant Recessed TV Connection Outlet Plates.

Sold separately.

AV Connectors

Bryant SFFGW AV Gold F-Connectors provides a perfect solution for distributing coaxial (RG-6 and RG-59) video signals. Requiring no soldering, these F-connectors install with a snap and provide a quick easy 'screw-on' or 'push-on' termination. For use with Bryant Recessed TV Connection Outlet Plates.

Sold separately.

Modular Snap Fit Data Jacks

Bryant NSJ5EW Voice/Data Jack provides for a wide range of applications ranging from high performance data demands of gigabit Ethernet. For use with Bryant Recessed TV Connection Outlet Plates.

Sold separately.

Keystone HDMI

Bryant SFHC14W Single Feed Thru HDMI 1.4 Connector for use with Bryant Recessed TV Connection Outlet Plates.

Sold separately.

Product description

Arlington TVBS507-1 Steel TV Box Recessed Outlet Wall Plate Kit, Steel box with non-metallic paintable trim plate. Perfect way to mount flat screen TVs flush against the wall. Recessed bracket sits behind the wall to help you hide wires. Adjusts to fit 1/4-Inch to 1-1/2-Inch thick wall board, paneling or drywall. Designed for power and low voltage wiring-perfect for lcd, led, plasma tv in White

• Steel box with non-metallic paintable trim plate
• Perfect way to mount flat screen TVs flush against the wall
• Recessed bracket sits behind the wall to help you hide wires
• Adjusts to fit 1/4-Inch to 1-1/2-Inch thick wall board, paneling or drywall
• Designed for power and low voltage wiring-perfect for lcd, led, plasma tv in black

User questions & answers

Question:	how can i get just the separator for the 3-gang steel box, i lost it during new construction
Answer:	Yes you can. This is the specific battery I used in my G&G M4, and I also use a T-energy smart charger. Works great!
Question:	What is the depth from the outer edge of the box (the wall side facing you) and the face of an installed outlet? I have a powerpack that I need flush
Answer:	This was the small one
Question:	Does the steel version of the 3 gang box have the ability to mount to a steel stud or only the "old construction" tabs
Answer:	Yes it's recharge able,you can get the smart charger on here for pretty cheap.
Question:	If I build a wooden box housing, can I install this in the floor
Answer:	No, it is only the battery pack without charger.You need to buy the charger by yourself.
Question:	I want one side to be a duplex and the other to be hdmi single port . what are my options
Answer:	Our battery can support loading current range within 160mA-13A.
Question:	What size are the knockouts on the bottom of the steel box
Answer:	For accurate time for charging this, I use smart charger called Tenergy smart universal charger and can be purchased at Amazon.
Question:	Can you please confirm the dimensions of the trim plate. Also, are there tabs on both top and bottom for retrofit install or just top
Answer:	Yes, all M4's that take the battery in the stock
Question:	I have multiple devices that require power. Can 2 duplex outlets be used in one of these boxes
Answer:	131.5mm long and diameter is 21.3mm

Product description

DataComm Electronics new patented Recessed Low Voltage Media Plate with Duplex Receptacle offers the convenience of a duplex receptacle and a recessed plate with enough room to store low voltage cables behind your flat panel TV.

• Low profile design fits behind the industry's thinnest mounts and tv’s
• Large cable pass-through runs up to 15 low voltage cables through the opening
• Includes a 15 amp/125 volt duplex receptacle
• Mounting wings fasten to the drywall as you tighten, eliminating the need for a low voltage mounting bracket
• Plastic electrical box houses electrical connection

User questions & answers

Question:	If mounted directly to drywall (not studs), is a low voltage mounting bracket needed
Answer:	No bracket is needed. Cut out a hole in the drywall, insert and the locking tabs will pull tight when tightened with a screwdriver. The outlet box has a separate back to keep wires contained.
Question:	Are the 120Volts conductors completely enclosed in a box, as per the NEC
Answer:	Yes there is a PVC on the back of the receptacle cut out. I wondered the same thing. Mine worked out very well.
Question:	Will this fit in a standard 2 gang electrical box? Looks like the angle on the outlet would prevent that. 3 gang needed
Answer:	Standard is a single gang. It fits one standard outlet, standard box, comes with box and outlet. Designed to be set between two studs not up against one, held by flip clamps to the drywall.
Question:	does this come with the top (for the tv) and bottom outlet (that plugs into an existing outlet)?? or do i have to buy a separate bottom outlet
Answer:	It has to be wired to existing outlet or some power source.. This is not plug and play. If have no electrical expirence, professional install is recommended.

Product features

Recessed Low Voltage Media Plate

The patented Recessed Low Voltage Media Plate with Duplex Receptacle/Duplex offers the convenience of a duplex receptacle and a recessed plate with enough room to store up to 15 low voltage cables behind your flat panel TV.

Product description

Arlington DVFR1W-1 Recessed Electrical Outlet Mounting Box w/ Paintable Wall Plate, 1-Gang, WhiteRecessed box allows items, such as furniture, to be placed closer to the wallPlugs don't extend past the wall like a regular boxTrim plate is textured / paintableFor power or low voltage applicationsPositioning tabs for 1/2 Inch wall thickness assure accurate placement on studsNeed more information on this product? Click here to ask.

From the Manufacturer

Arlington DVFR1W-1 Recessed Electrical Box Single Gang. Arlington's Recessed Indoor IN BOX, DVFR1W-1, is for New and Retrofit Construction. Non-metallic, recessed electrical box with trim plate. It's a recessed box so plugs don't extend past the wall, like they do in a regular box. You can mount TVs flush or push furniture closer to the wall.

• Recessed box allows items, such as furniture, to be placed closer to the wall
• Plugs don't extend past the wall like a regular box
• Trim plate is textured / paintable
• For power or low voltage applications
• Positioning tabs for 1/2 Inch wall thickness assure accurate placement on studs

User questions & answers

Question:	Is this product all I will need for "hidden" electrical wiring? I do not need to "hide" the cable as it is wireless
Answer:	Contact the seller,they should be able to supply you with the certification...etl or ve or ul....D
Question:	Can the faceplates be used on an existing box? We have 20 amp outlets and the standard recessed outlets come with 15 and when we tried to replace them
Answer:	No, it will not. The TG15RD31 is meant to be used with copper wire.
Question:	How deep is the surface of the outlet from the wall
Answer:	The depth of the outlet is 1.9". A standard junction box will work with the outlet. Best Regards, TopGreener Inc.
Question:	Will this box work to recess a GFCI outlet, or would the additional depth of the GFCI make the whole assembly too large for 2x4 framing
Answer:	The push in terminals are for a one time use. It states this on the back of the outlet. You can try to twist the wires out but if you can not you will need to cut the wires. Best Regards, TopGreener Inc.

• Dual Gang Recessed box allows items, such as furniture, to be placed closer to the wall
• Plugs don't extend past the wall like a regular box
• Trim plate is textured / paintable
• For power or low voltage applications
• Positioning tabs for 1/2 Inch wall thickness assure accurate placement on studs

User questions & answers

Question:	What are the rough cut dimensions for the recessed portion of the 4 gang box
Answer:	Unfortunately, we're not familiar with that type of application. This is a 9.6V 1600mAh NiMH battery with a mini tamiya connector and has the following dimensions: 120 mm (Length);35 mm (Width); 18.5mm (Height) If your original battery or application meets these specs, it should fit properly.
Question:	Quality of switch plate: Fasteing the screw itself broke the switch plate. Is this common
Answer:	If it has a full stock yes. I purchased one. For one of my mp's. Great battery
Question:	Can this also be used in a kitchen setting or is it only good for TV's
Answer:	Buffertube=No Stock=Yes Hand guard=Maybe
Question:	Is the outlet itself included
Answer:	I have two m4 AEG's and they fit great. Not familiar with a g36c.
Question:	The wall plate broke while installing. A standard 2 gang Decora plate doesn't seem to fit. How can i get a new plate
Answer:	No it does not. But be sure to purchase a "smart" charger. One that will monitor the state and rate of charge so as to not over charge the battery. There are plenty of decent ones available here on Amazon.

Product features

Two-Gang Recessed TV Box for Power and Low Voltage

Arlington’s recessed non-metallic combination power and low voltage TV BOX Kit includes all you need to mount a flat screen TV secure, and flush against a wall.

The box offers power in one side and low voltage in the other for Class 2 wiring of satellite or cable TV, speakers and more.

Two-Gang Recessed TV Box for Power and Low Voltage

Plugs and connectors stay inside this two-gang box; wires stay hidden behind the wall.

A Complete Installation

The TV Box can be used for both new and retrofit projects - UL/CSA Listed.

Step 1

Using box plate as template, mark location and cut hole.

Step 2

Attach trim plate to box. Pull wire/cables. Install box assembly in wall.

Step 3

Tighten mounting wing screws to pull box securely against wall.

Step 4

Finish installation

iMBAPrice DVFR2W-1 Recessed Electrical Outlet Mounting Box

In-Box kits recess 110 outlets and allow you to place appliances closer to the wall. Microwave ovens, coffee makers-even LCD TVs-benefit from the closer spacing for a custom installation and appearance; power plugs no longer extend from the wall.

iMBAPrice DVFR2W-1 Double Gang Recessed Electrical Box. Recessed Indoor IN BOX, DVFR2W-1, is for New and Retrofit Construction. Non-metallic, recessed electrical box with the trim plate.

SPACE-SAVING DESIGN

Low-voltage connectors offer both terminated and pull-through capability, so plugs and multimedia connections stay recessed.

FLEXIBLE CONFIGURATION

Position either line voltage or low voltage in all three openings that protects electronics from potentially damaging power surges.

CLEAN APPEARANCE

Simplifies connections to cable or satellite boxes, DVRs, DVD players, TV players, surround-sound systems and more.

Product description

1 Gang Recessed Dual Power Outlet, UL Listed This product has a minimalist design that is sleek and unnoticeable. Perfect for remodeling or new construction projects, this power outlet creates 1 inch of extra room to connect to your devices. It comes with a built-in wall plate and works great behind flat screen displays. Features: 125V 15Amp Self-grounding UL-Listed Color: White. Dimensions: 4.5/8in x 2.7/8in x 2in, 1in recessed area.

• Product Dimensions: 4.62"L x 2.87"W x 2"H, 1" recessed area.
• 125V, 15Amp, Color: White. Self-grounding.
• UL-Listed. 2 Year Warranty.

Product description

Conceal cables and power for your wall mounted TV. Introducing the all new TWO-CK in-wall power and cable management system. Dual-gang size all-in-one design. Designed to simplify wiring behind wall-mounted flat-panel TV. This discreet system allows low voltage cables and wires to be routed through the wall for a clean look. Code Compliant to install power, includes hardware and helpful mounting template make the Two-CK the perfect do-it-yourself solution for any skill level, without the need for an electrician. No wiring, simple snap together Power Connectors make this safe and easy.

• Dual Outlet In-Wall Cable Management System for Wall Mounted Flat Screen LED, LCD, and Plasma Televisions. This kit includes Two Power Outlets for mounting either two TV's OR one TV and one Audio Visual Accessory Such as a Soundbar.
• No more messy cables hanging down the wall between the TV and the floor. No electrician needed with snap together Power Connectors.
• This system allows for Wall Mounted TV's to hide low-voltage cables and wires routed behind the wall for a clean look.
• The Included In-Wall PowerConnect Cable and 6-foot Power Cord is code compliant. Does not include HDMI Cables or other Low Voltage Audio Visual Cables.
• Included Recessed wall mount plates are hidden behind Flat Screen TV Mount and should work with the thinnest TV mounts and thinnest TV's on the market.
• Top Rated Product with Simple Easy DIY Installation. 6-foot length in-wall Code Compliant

User questions & answers

Question:	How deep are the junction boxes? I am planning to install this in an exterior wall of a concrete block structure
Answer:	Yes, D-Line Cable Tidy Boxes are made from a robust ABS plastic. It's the same plastic that Legos and automotive parts are made out of. Thank you for your interest in D-Line
Question:	Can you purchase new wing-tabs? Mine buckled
Answer:	I guess the honest answer is that it depends upon the size of the adapter, but the large Cable Tidy Unit should certainly have plenty of room for most normal sized adapters.
Question:	Are there any air infiltration issues with the slot for hdmi/cables if used on an exterior wall
Answer:	Try this one - it has 8 outlets and 4 USB ports and should fit nicely in your D-Line power strip enclosure box. https://www.amazon.com/BESTEK-8-Outlet-Protector-Charging-Extension/dp/B0191D99T4
Question:	whats the difference between this and the pro-6 model
Answer:	As indicated in the "PRODUCT DESCRIPTION," the dimensions are: Product Dimensions: 6.5 x 16.5 x 5.2 inches ; 1.7 pounds

Product features

PowerBridge In-wall Power and Cable Management Kit for Wall Mounted TV

Everything you need to power your TV and hide unsightly cords inside the wall quickly and easily.

Power Outlet | Power Inlet

-Same size as standard wall plates you already have in your home.

- Brush style AV cable pass-through.

- Power indicator light. Exclusive feature lets you know you have power to plug into.

Recessed In-Wall

- Works with all brands of TVs and all wall mount types.

- Ideal for Samsung TV power cords with right-angle plugs.

- Deep recessed allows for the TV plug to inset completely for low-profile wall mounting of your TV.

PowerConnectors

- Engineered to provide the easiest and safest electrical installation.

- The only kit with Electrical Code compliant in-wall connectors.

- Simply click together the pre-wired PowerConnectors to power your TV.

- No hard-wiring connections required.

Included

- Dual power outlet - Pre-wired 6 feet in-wall cable with PowerConnector.

- Power Inlet - Pre-wired 1 feet in-wall cable with PowerConnector.

- 6 feet power-supply cord.

- Installation template.

- Easy to follow printed instructions.

- HDMI or any AV cables are not included.

Step 1 - Cut It - Drop it

Use included wall template to locate two small openings, one behind the TV and one below.

Use a utility knife or drywall saw (not included).

Drop the pre-wired 6 feet cable with PowerConnector down inside the wall along with your AV cables, pull through the lower wall opening.

Step 2 - Click It - Secure it

Simply click the PowerConnector you pulled through the lower opening, to the shorter 1 feet pre-wired PowerConnector of the inlet.

Secure both wall plates with a flat-blade screwdriver to release the back-tabs against the backside of the drywall.

Step 3 - Connect it - Power On

No electrical wiring required, simply plug in the supplied 6 feet white power-supply cord to the inlet and to your existing outlet or power-strip (not included).

It's really that easy.

Product description

Arlington Tvbu507 plastic screw mount 2-gang recessed TV box 6.818 inch x 7.93 inch x 3.875 inch White TV box™

From the Manufacturer

This recessed TV box is specifically designed for helping organize wires for TVs and stereos. Most electrical boxes are made for low voltage, or high voltage, but this box has both! It allows you to mount LCD and plasma TV's flush against the wall. It provides a secure installation, with good looks. The textured trim plate is included and paintable to cover edges of cut drywall. This unit can be installed on new construction directly to frame, or to exsisting homes where it tightens to the wall. The wings automatically turn into place and tighten as the screws are turned. Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.

• RELIABLE SUPPORT - Designed to support hanging of CAT 5, 6, 7 and fiber optic. Can be stacked on a beam clamp. Flexible and non-metallic, sagging, bending or damaging the cable!
• VERSITILE MOUNTING - Single or multiple LOOP hangers mount in a variety of ways and rotate to any angle.
• FLEXIBLE AND NON-METALIC - No sagging, bending or damaging the cable!
• COST EFFECTIVE SOLUTION - TL25 holds the same amount of cable as a J-hook, at half the cost!
• SPECIFICATIONS – Height: 3.461" - Width 4.575" - Weight 0.036 lbs/each

User questions & answers

Question:	Is there a version of the 3 gang that I can put 2 high voltage and 1 low voltage outlets in
Answer:	You have to have a “smart charger” to know. That’s a charger that has an LED light that will change colors indicting when it’s charged. Mine turns red when you plug the used battery in, and then it turns green when it’s fully charged. You need to know if your charger is smart charger or not, because the charger that came with my rifle has a green LED light, but it’s only a power indicator.
Question:	Can it fit on a standard 2x4" wall. The 2 gang box is too deep to fit
Answer:	It is a small tamiya
Question:	The screew for the cover plate are too small for the box (the one in the wall). Did I miss something
Answer:	I don't see a problem using this battery in the KWA CQR mod 2 but it might not fit.
Question:	Is it hard plastic? cause i would like to but it in a concrete wall
Answer:	Herr is the size of the battery.Dimensions: 117 mm (Length);35 mm (Width); 18.5mm (Height)Measure your stock battery and if they are same size or new battery is smaller then it will work. If you cant measure in millimeters I am sure there is a app that will do the conversion. Or they ratio I know is 2.54 centimeters per 1 inch. Or 25.4 mm to 1 inch. Have fun.Will

Product features

Three-Gang Recessed TV Box for Power and Low Voltage

Arlington’s recessed non-metallic combination power and low voltage TV BOX is the secure, easy way to mount a flat screen TV flush against a wall.

It features power in one side; low voltage in the other for Class 2 wiring of satellite or cable TV.

TV Box for Power and Low Voltage

Plugs and connectors stay inside this two-gang box; wires stay hidden behind the wall.

A Complete Installation

The TV Box can be used for both new and retrofit projects - UL/CSA Listed.

Product description

Introducing the all new TWO-PRO in-wall dual outlet power and cable management system from Power Bridge. Perfect for motorized mounts. Same size as standard dual and single wall plates and designed to simplify wiring behind wall-mounted flat-panel TVs, this discreet system allows low voltage cables and wires to be routed through the wall for a clean look. The TWO-PRO is fully code-compliant to install power, and includes hardware and helpful mounting template to make the TWO-PRO the perfect do-it-yourself solution for any skill level, without the need for an electrician.

• Dual Power Outlet In-Wall Cable Management System for Wall Mounted Flat Screen LED, LCD, and Plasma Televisions. This kit includes Two Power Outlets for mounting either two TV's OR one TV and one Audio Visual Accessory Such as a Soundbar.
• The Included In-Wall 6-Foot Romex Cable and Power Cord are both code compliant. Does not include HDMI Cables or other Low Voltage Audio Visual Cables. Does not include PowerConnect Cable found in Powerbridge One-CK or Two-CK
• No more messy cables hanging down the wall between the TV and the floor. No electrician needed, snap-together installation. Professional Version Kit.
• This system allows for Wall Mounted TV’s to hide low-voltage cables and wires routed behind the wall for a clean look. Compatible with all TV’s including Samsung flat-plug power cords. Compatible with all types of low-profile wall-mounts
• Included Recessed wall mount plates are hidden behind Flat Screen TV Mount and should work with the thinnest TV mounts and thinnest TV’s on the market.

User questions & answers

Question:	How can I use this if i have horizontal studs
Answer:	Hello, dear customers, our products include: 3 stylish wire box, 2.46ft-1/2 inch Cable Management Sleeve ,2 x Six Slot Cable Holders,2 x Five Slot Cable Holders,2 x Triple Slot Cable Holders,6 x One Slot Cable Holders, 6 pcs Cable Clamps, 6 Colorful Cable Ties. These will be the actual products you receive. If you have any questions, please contact us, we will do our best to solve it for you. Thank you for your love of Cable Garden.
Question:	whats the difference between this and the two-ck model
Answer:	That would probably be difficult. You would have to drill a hole through the side. The lid sits in the box so it would fall off if you tried to attach from the bottom.
Question:	Wouldn't it be cheaper to run a new outlet, install low voltage bracket, and CL3 rated hdmi cable
Answer:	Yes, they're non-slip.There are four prominent small circles underneath to help to hold their position.
Question:	Does the inlet side fit in a standard surface mount, single gang, box? I would have to surface mount on drywall because of space constraints
Answer:	Hello, dear customers, Cable Garden Cable Tidy Boxes are made from a robust ABS plastic. It's the same plastic that Legos and automotive parts are made out of. Thank you for your interest in Cable Garden

Product features

PowerBridge In-wall Power and Cable Management Kit for Wall Mounted TV

PRO-Series - Basic wiring connections and assembly necessary. Not pre-assembled or wired as PowerBridge One-CK or Two-CK Series.

Power Outlet | Power Inlet

- Same size as standard wall plates you already have in your home.

- Brush style AV cable pass-through.

Recessed Dual Receptacles

- The only recessed kit with side-by-side dual receptacles, allows for two plugs to stay recessed.

- Works with all brands of TVs and all wall mount types.

- Power your TV and co-mounted Sound-Bar.

- The only kit for Samsung flat-head and Sound-Bar power.

Kit Includes

- Recessed Power Outlet and Power Inlet with Cable Brush pass-through.

- 6-feet pre-stripped in-wall code compliant power cable.

- 6-foot power-cord.

Easy do-it-yourself

- Easy step by step detailed pictorial instructions.

- Cardboard template for wall cutout.

Step 1

Trace supplied template. for both upper TV and lower inlet locations.

Use sharp utility knife or drywall saw (not supplied), cut out wall section.

Drop supplied pre-stripped in-wall power cable down in wall.

Also drop AV cables at the same time.

May need a wall-fish rod or tape to pull cables through insulation.

Step 2

PowerBridge Pro-Series requires basic wiring connections of the three wires to terminals on the backside.

Step 3

Use supplied hex-tool with supplied screws to secure the back cover wiring box.

Step 4

PowerBridge Pro-Series requires basic wiring connections of the three wires to terminals on the backside.

Step 5

Use supplied hex-tool with supplied screws to secure the back cover wiring box.

Step 6

Install wall-plates in the opening, secure screws on the front to open tabs on the backside which will secure to the drywall.

Plug in the supplied 6' power-cord to existing power outlet or your own surge protector.

• Single gang brush wall plate has its own smart mounting wings - 1 Gang Cable wall plate is designed to hide your office/house cable accessories behind the drywall in all environments. The recessed wall plate cable hider Built-in 2 mounting fly wings, no need extra 1 gang low voltage bracket, a smart design for installation.
• Large brush cut Low Voltage wall plate for most cables - Pass more cables by large-cut wall cable plate, perfect for low voltage cable wires, such as HDMI / RCA / USA / VGA / USB / Networking wires and all other audio/video data cables
• Easy to Install - Installation will be finished in few minutes.You just need to insert the Single gang pass through wall plate into the the wall. The Wall Plate package is equipped with mounting color-matched screws
• Package Included - 1 Gang brush wall plate, cut template, and screws, only take simple steps to finish installing; Cosfox Impressive white recessed wall plate can match most of house/office existing color.
• Quality warranty for 1 Gang wall plate - Lifetime quality guarantee by Cosfox. Please contact us directly if you get any questions,Please find your order and click "Contact Seller" for quick Technical Support.