14 best speaker selectors
Speaker selectors, also known as speaker selector switch boxes, are audio components used in home audio systems to distribute audio signals from a single source to multiple speakers or speaker zones. These devices are commonly used in situations where you want to play music or audio in different rooms or areas of your home, allowing you to control which speakers receive the audio signal.
Key features and information about speaker selectors:
Audio Distribution: Speaker selectors are primarily designed to distribute audio signals from a central source (such as a stereo receiver or amplifier) to multiple sets of speakers located in different rooms or zones. This enables you to listen to music or audio in various parts of your home simultaneously or individually.
Zone Control: One of the primary functions of a speaker selector is to provide zone control. This means you can select which speakers or zones receive the audio signal. For example, you can choose to play music in the living room, bedroom, or both, depending on your preferences.
Impedance Matching: Many speaker selectors come with impedance matching capabilities. Impedance matching ensures that the speakers connected to the selector receive the appropriate amount of power, preventing damage to the amplifier and maintaining sound quality. This is particularly important when connecting multiple speakers.
Multiple Speaker Sets: Speaker selectors typically feature connections for several pairs of speakers. Some models allow you to connect as few as two pairs, while others support more extensive setups with multiple zones and speakers.
Volume Control: Some speaker selectors include individual volume controls for each speaker pair or zone.This allows you to adjust the volume independently for different areas, accommodating varying preferences and room sizes.
Protection Circuitry: Many speaker selectors include protection circuitry to safeguard your amplifier against overload and short circuits. This added protection helps prevent damage to your audio equipment.
Manual or Remote Control: Depending on the model, speaker selectors may offer manual control via physical switches or remote control options. Remote-controlled selectors provide convenient access to zone selection and volume adjustment from a distance.
Audio Sources: You can connect various audio sources to the central amplifier, including CD players, streaming devices, turntables, and more. The selector allows you to choose which source you want to distribute to the selected speakers.
Installation: Speaker selectors are typically installed near the audio source and connected to the amplifier. Speaker wires are then run from the selector to each pair of speakers or zones.
Compatibility: Ensure that the speaker selector you choose is compatible with your audio equipment, including the amplifier's power output and the impedance ratings of your speakers.
Speaker selectors are valuable accessories for creating a multi-room audio system in your home, allowing you to enjoy music or audio in various areas while maintaining control and flexibility over your audio setup. They are commonly used in home theaters, distributed audio systems, and whole-house audio setups.
Below you can find our editor's choice of the best speaker selectors on the market
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Monoprice 4-Channel Speaker Selector - Black Up to 140W Per Ch. Distribute Speakers, Perfect for Home Theater Audio
Monoprice
Product description
Distribute your music to every room in your home with this 4 Channel speaker selector from Monoprice. This 4 Channel speaker selector allows you to distribute your audio signals to up to four different speaker zones. An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant no matter how many speakers are in use. This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place.
- Distribute your music to every room in your home with this 4-Channel Speaker Selector
- llows you to distribute your audio signals to up to four different speaker "zones"
- This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place
- An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant, no matter how many speakers are in use
- Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
User questions & answers
| Question: | will the Monoprice 109995 accommodate 14 gauge wire |
| Answer: | According to the user manual, it can accommodate up to 14 AWG.http://www.monopricehub.com/files/manuals/9995_Manual_130103.pdf |
| Question: | the output of my Denon 1912 is 90W per channel. This is rated at 70W. Can it support my Denon |
| Answer: | My Pioneer Elite (Model VSX53 if you want to double check the specs) is rated at 110 w/channel and this splitter works just fine. I've had no issues. |
| Question: | Can I use this in reverse? Multiple amps to one pair of speakers |
| Answer: | In theory you can. Use the speaker select switches to hook up the amplifier speaker outputs. Hook the one set of speakers you wish to share to the connector labled amplifier input. But be warned DO NOT select both amps at once. If you are lucky, you will blow the speaker fuse, if it’s got one. At worst you will trip the amp protection circuit or blow an internal fuse. |
| Question: | can you run all 4-channels at the same time |
| Answer: | I could not get the darn thing to work at all. I bought a NEW Denon 5+1 receiver and had extra cables to outiside deck speakers (should have gotten 7+1) that could not hook up as I had four surround plus sub and center channel in LR. Thought this would allow me to get the outside speakers working like a splitter that I could turn on and off. Was wrong or either not using correctly but does not very complex. I pushed every single combination of buttons and never got any sound to go through outside OR inside. |
Product features
Monoprice 4-Channel Speaker Selector - Black Up to 140W Per Ch. Distribute Speakers, Perfect for Home Theater Audio
Distribute your music to every room in your home with this 4-Channel Speaker Selector from Monoprice!
This 4-channel speaker selector allows you to distribute your audio signals to up to four different speaker "zones". An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant, no matter how many speakers are in use. This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place.
4 Channel Speaker Selector Switch - Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Amplifier Receiver System - Pyle PSLSW4
Pyle
Product description
Pyle Model : PSLSW4
4-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System
Features:Technical Specs:
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
- CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
- INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
- EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
- OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability
User questions & answers
| Question: | Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you |
| Answer: | Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps. |
| Question: | I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together |
| Answer: | Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps. |
| Question: | Can the speaker connectors take banana plugs as opposed to threading the wires |
| Answer: | I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly. |
| Question: | So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to |
| Answer: | Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though. |
Product features
4-Ch. Speaker Selector System
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.
CONTROL 4 SPEAKERS
The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
INDEPENDENT AUDIO CONTROL
Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.
EASY SETUP
Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
Protection
Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.
Watt
The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
Dimensions
The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS6),Black
Pyle
Product description
PyleHome Model : PSS6
6-Ch. Stereo Speaker Selector
6 Channel High Power Stereo Speaker Selector
- Up to 6 Separate Speaker Pairs to Your Stereo System
- Accepts Speaker Wires up to 14-Gauge
- Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
- Protection Circuitry Keeps It Running Smoothly
- Frequency Response: 20Hz-20KHz
- Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector |
| Answer: | There is no difference in for the install if you mount speakers in the wall or ceiling. |
| Question: | Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver |
| Answer: | I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick). |
| Question: | How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A |
| Answer: | I would recommend a 5.1 home audio receiver. |
| Question: | can i play all 6 speakers at the same time |
| Answer: | The pyle pta44bt would be a good amp for the speakers. |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Monoprice SSVC-4.1 Single Input 4-Channel Speaker Selector with Volume Control, Impedance Protection, Individual Zone On/Off Buttons, Black, Model Number: 138159
Monoprice
Product description
The SSVC-4. 1 Speaker Selector is a resistor-based, impedance matching speaker selector used for connecting up to four pairs of 4-ohm or 8-ohm speakers, while maintaining a safe impedance load for your amplifier or receiver. Each pair of speakers can be independently turned on or off using push buttons on the front panel, with no need for worrying about amplifier loading. Each zone features an independent volume control.
- Connect and safely control multiple speaker pairs with a single amplifier. Automatic impedance protection circuitry.
- 100 watts/channel continuous power handling capacity, 200 watts/channel peak. 5-ohm minimum amplifier impedance with four 4-ohm speakers selected, 6-ohm minimum with 8-ohm speakers.
- Individual zone on/off buttons and volume controls.
- Heavy-duty screw-type connectors supporting 12-18 AWG speaker wire.
- Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configurations. Accurate, noise-free switching.
User questions & answers
| Question: | Input from sony str-dh190 and out to 3 zones but no audio; tried connecting 1 zone and still no audio - tried 6 & 8 ohms - any other recommendations |
| Answer: | Make sure the input volume is up (Bluetooth, aux from phone or aux) amp volume should be up at least 50%-75%. Then turn up the SS4 vc. Should be on 8ohm, button pressed in (in the on position) and select A or B depending on what you have it plugged into the back. |
| Question: | Is there a warranty |
| Answer: | Yes it comes with an one year warranty. |
| Question: | Monoprice, can I connect 1 pair of rated 8 ohm (nominal 6 ohms - Elacs speakers and a different pair of 8 ohm speakers to play simultaneously |
| Answer: | Yes, that is the whole point of this product - to allow one amplifier to drive several pairs of speakers, with independent volume control over each pair, and impedance protection to protect the amplifier. |
| Question: | What does l- l+ r- r+ mean |
| Answer: | L is for the left speaker and R is for the right speaker. |
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 4 Pairs Of speakers - Pyle PSPVC4
Pyle
Product description
Up to 4 Separate Speaker Pairs to your Stereo System Accepts Speaker Wires Up to 14- Gauge Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms Protection Circuitry Keeps it Running Smoothly Individual Speaker Volume Control Support Two Stereo Amplifiers Frequency Response: 20Hz-20KHz Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D) Sold as: Unit Weight: 9.32 lbs. This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- BEST PERFORMANCE SPEAKER SWITCH WITH VOLUME CONTROL:The new and Improved Multi Channel stereo speaker selector with volume control can control the volume and select what speaker you want to play without have to go to the amplifier each time.
- CONTROL POWERED 4 CHANNEL AMPLIFIER: With the 4-channel a/b/c/d speaker selector w/ volume control You Can Control the volume and Switch on of each speaker or play all speakers at the same time.From and high power and low powered stereo amplifiers
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Volume Control Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is powered by your stereo - Just plug in the wires to Control any High Powered Amplifiers from Pyle Crown Denon Sony Panasonic Yamaha and Many More.Control 4 10 4 6 8 inch Speaker Box.Frequency Response: 20Hz-20KHz
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch and Volume Control we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
User questions & answers
| Question: | Is this rack mountable |
| Answer: | Hi, no it is not mountable. However, you may customize your own rackmount. Thank you. |
| Question: | can I use this amp with my sony str 1030 reciever to add additional power |
| Answer: | This is not an amp. It takes an output to speakers and can run different sets of speakers. If you do not have enough power in your receiver to run the speakers it will not work. Each time you turn on a set of speakers it will drop the power by a percentage. Some receivers can not handle more then three sets. |
| Question: | Can one of the zones I hook to be a powered subwoofer (which itself feeds a pair of small speakers |
| Answer: | No you cannot hook up a powered sub woofer to a speaker selector |
| Question: | Will this work with an old devon dra 35v receiver from the mid 80s? i have 4 pairs of speakers and might need to use at least three pairs at a time |
| Answer: | I do not recognize the Receiver you are referring to but the connections are very simple. The speaker wires that are driving your speakers will be shortened and then connected to the Pyle Home speaker selector. Then your speakers will be connected to the Pyle Home speaker selector to each of the different four zones that you have in your home/office/whatever. I am presently driving three pairs of speakers with one zone unused. I have had perfect performance. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- Up to 4 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Frequency Response: 20Hz-20KHz
- Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D)
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS8)
Pyle
Product description
PyleHome Model : PSS8
8-Ch. Stereo Speaker Selector
8 Channel High Power Stereo Speaker Selector
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
- PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
- Up To 8 Separate Speakers Pair To Your Stereo System
- Accepts Speaker Wires Up To 14-Gauge
User questions & answers
| Question: | Does this unit have impedance matching transformer feature |
| Answer: | Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you. |
| Question: | I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device |
| Answer: | I think you will be fine, depending on how long your wire runs are. |
| Question: | Can you use it the opposite way....multiple recievers to one set of speakers |
| Answer: | No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera |
| Question: | How can it be both new and improved |
| Answer: | Increase connectivity range |
Product features
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR
The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE
The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.
PLUG AND PLAY EASY INSTALL
The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.
Monoprice SS-Pro 12 High Power Dual Source 300 Watt Peak 12 Pair Impedance Matching Speaker Selector (139067), Black
Product description
The Monoprice ss-pro 12 is a powerful and efficient dual source, audiophile grade speaker selector for up to 12 pairs of speakers. Featuring robust transformers, the ss-pro 12 allows you to play all 12 pairs of speakers at once without damaging the amplifier, and is able to withstand up to 300 watts peak of power per channel. A front panel a/b switch allows you to choose between two amplifier sources, and easily removable Snap in connectors make installation easy. A rotary switch located on the rear panel can be used to set the appropriate impedance based on the number of pair of speakers connected.
- 12-Zone speaker selector that allows you to connect up to 12 pairs of speakers or 12 listening zones and control each zone with front panel push-buttons.
- Utilizes audiophile-grade impedance-matching transformers to safely distribute maximum power throughout your system.
- Easy to use front panel switch to choose between sources.
- Includes 6 shingle clips and 2 Spacers.
- Turns on when at least 10in of sensor wire detects moisture and has a temperature of +39.2 degree F. Turns off at +44.6 degree F or no moisture is detected.
Niles SS-6 Speaker Selector
Niles
Product description
Niles SS-6 speaker selector
- Niles SS-6 speaker selector
- Protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiers
- Removable connectors accommodate up to 14-gauge wire
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | Can this model handle 8-ohm speakers? Niles' website states that 4-ohm speakers should be used |
| Answer: | i used 8 ohm speakers. didn't realize there was a recommendation. |
| Question: | Could I run 5 surround sound speakers from my living room plus 4-6 other speakers throughout the house through this selector and my receiver |
| Answer: | If you are talking about using the Zone 2 on your receiver to power 4-6 other speakers you could but it would not be the best thing to do. one thing you have to make sure is that your speakers all have the same Ohm rating and that your receiver is capable with that that certain resistance. You would probably be safe with running 2 pairs of speakers but I would definitely not do 3 pairs. I would look into a 4 zone amplifier for that. Hope this helps! |
| Question: | I have a sonos amp and 8 ceiling speakers. Dont know the ohms of the speaker. Will this work |
| Answer: | It should work,range of ohms for niles 2-16 ohms it will match your 4 sets of speakers fine. |
| Question: | How does it connect from the receiver if your "outs" are only plugs |
| Answer: | The plugs (1-zone Each) have (4-each) set-screws with holes for 2 Pos & 2 Neg each speaker wires from receiver, or Amp SPEAKER output |
2 Zone Speaker Pair High Power Selector Switch Switcher with Gold Plated Banana Jacks, Audiophile Grade
Product description
The TC-7212 is an audiophile grade, high power 2 zone speaker selector switch which utilizes top quality internal circuitry, gold plated luxury input/output jacks which can accommodate up to 4mm banana sockets, UL, VDE approved silver plated brass contact switches to ensure best power transfer while not compromising your sound quality like all the low cost speaker switches online. It can handle 200W RMS while providing selection of up to two pairs of speakers from one location. Each zone may be selected individually, simultaneously or in any combination. It provides a perfect solution to the need for high quality distributed audio in residential audio or commercial sound applications. Internal switching uses a combination of series and parallel wiring, ensuring that the connected amplifier sees a minimum of a 4 ohm load when up to two pairs of 8 ohm speakers are connected. This means that any conventional amplifier or stereo receiver can drive multiple sets of speakers, without the need for external impedance matching devices. Includes pre-printed and blank room labels to mark speaker location. Strong stylish metal enclosure.
- Audiophile grade circuitry, UL, VDE approved silver plated brass contact switches for optimal sound transfer
- IN/OUTPUT through luxury gold plated banana sockets which can accomodate up to 4mm plugs or wires
- 200W RMS power handling, suitable for 8 ohm and above speakers
- Includes pre-printed and blank room labels to mark speaker locations
- Dimensions: 10.5" L x 5.3" W (includes banana sockets) x 2" H
User questions & answers
| Question: | Can this be used in reverse? Can I do two amps to one set of speakers |
| Answer: | spades or bare wire will work |
| Question: | Can i reverse the speakers with the amp? i want to be able to switch which amp powers one pair of speakers. can i do this |
| Answer: | Circuitry is designed to automatically select the most appropriate series or parallel connection to suit the number of speakers selected and ensure safe load impedance to the amplifier. |
| Question: | Will speaker wire spade connectors work, or only banana's |
| Answer: | Will it work on a Uniden handset |
| Question: | With both A and B switches in the on position are the speakers connected in series or parallel? This determines how many ohms are seen at the amp |
| Answer: | This headset is for AT&T Syn248 phones. There is a headset button on the telephone keypad. When there is an incoming call, press the headset button on the telephone keypad (headset is connected to the headset jack of the phone), the call will be connected, audio will go through the headset's speaker and microphone. |
Niles SS-4 Speaker Selector
Niles
Product description
Niles SS-4 speaker selector
- Niles SS-4 speaker selector
- Separate left and right ground paths for compatibility with all amplifiers, including Bridged designs
- Removable Screwless connectors accommodate up to 14-gauge wire. Rugged all metal chassis construction.
- Non-skid feet won't scratch furniture and ensure unit stability during operation 72 adhesive-backed room identification labels requires an amplifier that is compatible with a 4 Ohm load
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | My amplifier is capable of one pair of 4 ohms load. Can I use this to connect 2 pairs of speakers, each pair are 4 ohms load |
| Answer: | No |
| Question: | watts per channel handling.—Does this mean the input can only be 100 watts or that her output can be 100 watts per channel from 400 watt source |
| Answer: | It means that the maximum input can be 100 watts per channel. Now if you have a 400 watt amplifier, it can still work as long as you don't crank it up past 100 watts output. |
| Question: | I have a receiver Denon E400 that has 175W per channel, worked well with these speaker selector |
| Answer: | What matters is the impedance. Most Amps are 8 ohm as are speakers. When you hook multiple speakers in parallel the impedance goes down. The selector ensures that the impedance is at least 4 ohms even when as many as eight speakers are hooked in parallel (and would otherwise present 1 ohm of impedance). On my Yamaha receiver there is a switch that allows for a 4 ohm load and that is the key. You can probably run a 4 ohm load from an 8 ohm driver, it just means that more energy is dissipated in the amp than in the speakers but hopefully not so much as to do damage |
| Question: | Can I control volumes on two different speakers independently with this device |
| Answer: | No, there's no volumes controller on this device. You need a controller like ''Niles VCS100R White FG00956 100 Watt InWall Volume Control " (http://www.amazon.com/Niles-VCS100R-White-FG00956-Control/dp/B0001W1I58/ref=pd_sim_e_3) for each pair of speakers. |
Niles SSVC-4 Speaker Selector, Black
Niles
Product description
Niles SSVC-4 speaker selector, black
- Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak. Separate left and right ground paths for compatibility with all amplifiers
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- 10 year limited
- Accommodates 4 pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | Can this switch be run "in reverse"? (four amplifiers to one pair of speakers by being careful to have only one circuit at a time "on |
| Answer: | That sounds kind of sketchy I would not try it. Running this in reverse is not worth the damage it may cause. |
| Question: | How does this nile compare to osd for the same item |
| Answer: | What do you mean by osd? |
| Question: | Can I stack my Yamaha 6750 amp/receiver on top of this speaker selector |
| Answer: | Yes, but it will get a little warm. I originally put the speaker selector on top of the receiver and that was worse - the receiver would shut down after about 5 minutes.I now have the speaker selector on a separate shelf with my DVD player on top of it. |
| Question: | The description says black, but the pic is grey. so what is it |
| Answer: | This picture is badly shot. The unit is Black. |
XtremPro 2 Way Speaker Switch, 1 in 2 Out Way Pair Stereo Speaker Selector W/Volume Control Metal Non-Slip Box - Black (61052), 9.0 x 3.25 x 1.5
Product description
XtremPro 2 way speaker switch, 1 in 2 out way&nba; pair stereo speaker selector w/ volume control metal non-slip box - Black (61052)
Features: the product is used to distribute loudspeaker output signals from audio amplifiers to different loudspeakers for selection and control the volume. This product is only approved for connection to loudspeaker outputs of audio amplifiers and inputs of passive loudspeakers. Inputs: 1x stereo output: 2x stereo load: 60 W per Channel loudspeaker resistance: 4 - 8 ohms cable cross-section: max. 6 mm²
package contents: main unit x1 user manual x1
- 2-Channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
- Ideal for low cost Distributed audio in residential or commercial sound applications
- Individual control of each speaker pair. Impedance constant at 4-8 ohms, 60w(per Channel), 120W max
- Just hooked up to the stereo.No extra power supply needed
- Metal non-slip box, 9.0in x 3.25in x 1.5in
- Connector Type: HDMI
User questions & answers
| Question: | Will this work for a onkyo Home entertainment system |
| Answer: | Yes |
| Question: | There seems no definitive answers here. Can you connect the speaker and amp wires via Banana Plugs |
| Answer: | Don’t use banana plugs. Just twist your 12 ga wire more or just cut a couple strands off until it goes in. |
| Question: | Will "banana plugs" work with the connections |
| Answer: | 12 gauge and its tight |
| Question: | Can the volume to speaker part two be louder than the volume to speaker pair one |
| Answer: | Either amp can access the speakers, however, you must choose which speaker you desire as both speakers cannot be on at the same time. Only one or the other. The same rule applies to the amps as well. |
2 Amp x 6 Pair Speaker Selector Switch Switcher Volume Control, Commercial Grade Brass Jacks
Product description
The SP-96-V speaker selector with volume control will allow you to use two stereos with up to 12 speakers (6 pairs) placed around the house, restaurant, office, warehouse etc. You can turn each set of speakers on and off, and adjust the volume for each pair as well. The input for the SP-96-V comes from your stereos, amps, receivers, etc. This just means you take the speaker wires from the back of your stereo, amp, etc. and plug them into the either input terminals on the back of the SP-96-V. Each speaker pair has independent rotary volume control. Volume adjustment and impedance matching is accomplished through internal heavy-duty multi-trapped transformers for each speaker. This allows complete, independent control of each pair with maximum efficiency and virtually no generation of heat. The built-in precision auto impedance correction and overload protection circuits will safe-guard your amplifiers and speakers from damage due to excessively low impedance when all 12 speakers are playing at the same time. Machined brass gold plated color coded professional grade banana socket connections accept up to 10AWG wires. Dimensions: 2.50"H x 10.0"L x 16.0"W. Sturdy metal enclosure. Passive design, no power required.
- Allows you to use two stereos with up to 12 speakers (6 pairs) with volume control.
- Built-in precision auto impedance correction and overload protection.
- Brass Gold Plated Banana Sockets accept up to 10 gauge wire.
- 100W RMS, 200W peak per channel power handling.
- 2 Amp inputs, Individual rotary volume controls.
User questions & answers
| Question: | Can you connect a subwoofer to this |
| Answer: | The unit is just a splitter, not a switcheroo. There is a switch for each pair of speakers, so you can turn a pair off or on, but you cannot exchange them. The banana jacks allow you to easily exchange pairs, but you would have to do it manually. |
Latest Reviews
View all
Non Dairy Creamers
- Updated: 24.04.2023
- Read reviews
Apple Fish Oils
- Updated: 29.07.2023
- Read reviews
Accessory Genie Televisions
- Updated: 03.03.2023
- Read reviews
Ceramic Mug For Kids
- Updated: 05.06.2023
- Read reviews
Vince Shoes For Men
- Updated: 19.01.2023
- Read reviews