9 best speaker selector withs

Product description

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
• CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
• PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked

User questions & answers

Question:	I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible
Answer:	I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you.
Question:	Does this switch allow me to control sets of speakers independently
Answer:	I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp.
Question:	One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist
Answer:	Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier.
Question:	How do I hook this up to my 5.1 receiver
Answer:	The sound is great there is no distortion.

Product features

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

Product description

The TC-7220 Audio Crossover Network is an audiophile grade 2 way audio switch control center that provides the possibility for you to enjoy the convenience and flexibility of listening to different speakers and amplifiers in your system. Designed to provide distortion free audio from your audio amplifier or Home Theater System to your speakers. This unit features high quality, precision crafted speaker connectors that accept up to 12 gauge wire for maximum reliability and durability. Can handle 200W MAX. 9.5"W X 2"H x 5.5"L small footprint for easy accommodation. 1.2mm galvanized solid metal case.

• Listen to amplifier A or B through one pair of speakers
• Listen to Speakers pair 1 or 2 from one of the 2 amplifiers
• Compatible with all types of amplifiers and loudspeakers
• Input / output through gold plated binding post to accept heavy duty speaker wires or speaker wire pins
• No external power required

User questions & answers

Question:	can you switch both pairs of speakers on at same time with either amp 1 or amp 2 iow - 1 amp into 2 pairs of speakers
Answer:	Take the speakers lines running out of your stereo receiver plug them into the unit . Then you can split the Signal .
Question:	What size banana plugs fit into the connectors on the back? They must be minis like 3 or 3 mm. Standard banana plugs seem to be too big
Answer:	No holes for wall mounting. You would need to make one for it.
Question:	Can it be used to connect a surround sound receiver without an amp. pre-out port-by way of the front speaker terminals- to a second amplifier
Answer:	Yes, you have to wire it backwards of course - amps to speaker outputs, speakers to amp input. There are 1.8 ohm resistors in series with the amp output terminals so you will lose some volume. Also, they're only 5w so they won't take much power. I've played movies and CD at normal to loudish levels tho and they barely get warm if at all. I wouldn't turn it up to 11 tho. Finally, you MUST take great care and insure that only one amp is connected at any time. Even an amp that is turned off could be damaged by one that is on, never mind if they were both on.
Question:	can this selector be used to select between an amplifier and a surround Receiver
Answer:	It says warranty listed on user manual and in table of content it says Limited warranty, page 5 but page 5 is installation tips. I've read the whole thing and cant find any mention of warranty. That said, I've had it several months now and works great.

Product description

Niles SSVC-4 speaker selector, black

• Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak. Separate left and right ground paths for compatibility with all amplifiers
• Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
• Individual Room On/off Selector Switches
• 12-step Controls; 54dB Maximum Attenuation
• 10 year limited
• Accommodates 4 pairs of speakers
• Power handling - 100 watts per channel RMS; 200 watts peak

User questions & answers

Question:	Can this switch be run "in reverse"? (four amplifiers to one pair of speakers by being careful to have only one circuit at a time "on
Answer:	That sounds kind of sketchy I would not try it. Running this in reverse is not worth the damage it may cause.
Question:	How does this nile compare to osd for the same item
Answer:	What do you mean by osd?
Question:	Can I stack my Yamaha 6750 amp/receiver on top of this speaker selector
Answer:	Yes, but it will get a little warm. I originally put the speaker selector on top of the receiver and that was worse - the receiver would shut down after about 5 minutes.I now have the speaker selector on a separate shelf with my DVD player on top of it.
Question:	The description says black, but the pic is grey. so what is it
Answer:	This picture is badly shot. The unit is Black.

Product description

The NEW TEC-905B speaker selector with volume control will allow you to use two stereos with up to 10 speakers (5 pairs) placed around the house, restaurant, office, warehouse etc. You can turn each set of speakers on and off, and adjust the volume for each pair as well. The input for the TEC-905B comes from your stereos, amps, receivers, etc. This just means you take the speaker wires from the back of your stereo, amp, etc. and plug them into the either input terminals on the back of the TEC-905B. Each speaker pair has independent rotary volume control. Volume adjustment and impedance matching is accomplished through internal heavy-duty multi-trapped transformers for each speaker. This allows complete, independent control of each pair with maximum efficiency and virtually no generation of heat. The built-in precision auto impedance correction and overload protection circuits will safe-guard your amplifiers and speakers from damage due to excessively low impedance when all 10 speakers are playing at the same time. Rear gold plated color coded professional grade banana socket connections accept up to 12AWG wires. Also has headphone input with individual volume control as well. Features: Each pair of speakers can be alternatively switched to either amplifier A or B Frequency response: 20 Hz to 20 kHz High efficiency transformer based designed, fully automatic amplifier impedance protection Compatible impedance with 4 - 16 ohm speakers 100W RMS, 200W peak per channel power handling Individual rotary volume controls Master ON/OFF switch connects and disconnects the signal distribution from the amplifiers to the speakers Dimensions: 2.25"H x 15.5"L x 8.5"W Weight : 12 lb Headphone input with volume control Pre-printed zone and equipment list label included for easy speaker connection identification Sturdy metal enclosure Passive design, no power required

• Dual Source inputs, 5 Speaker Pair outputs
• Accepts up to 12 gauge speaker wire via gold plated banana socket connections
• High efficiency transformer based designed, fully automatic amplifier impedance protection
• 100W RMS, 200W peak per channel power handling
• Individual rotary volume controls

User questions & answers

Question:	Cna you still use wall mounted speaker volume controls in each room to control the volume
Answer:	Yes! I am using 2 Niles box to run 4 Cerwin Vega AT15 and 4 Kenwoods KLZ999... no problem at all!
Question:	The one page "manual" says will accept impedance from 4, 8, or 16. My speakers are 6 ohms. Are they compatible? Any risks
Answer:	yes
Question:	will this deliver 8ohms to each speaker
Answer:	I'd guess from the setup you describe, the 5 speakers in the family room are for a 5.1 Home Theater System, the rest being for stereo audio playback.This device allows a receiver to drive 6 pairs of stereo speakersA dual zone A-V receiver would be best, main zone to drive the 5 speakers and then hook the niles to Zone 2 to run the house audio speakers.
Question:	someone knows what the difference between this product and http://www.amazon.com/Matrix-Speaker-Selector-Switch both the same manufacturer
Answer:	HPS-6 allows you to only turn individual speaker pairs on and off at the switch. SSVC-6 supports inputs from two different sources. Two stereo amplifiers playing different music or other audio can connect and be selected at the volume control on the switch. So each pair or speakers can play either of the two input sources and volume is adjustable. Power handling is likely very close with both units. Check sp;ecs if you are going to rock the casbah. impedance matching with be featured on both switches. That is a big deal. Keeps the amps from running or failing.

Product description

4 pairs of 4 or 8 Ohm speakers, 200W, circuit overload protection, bypass mode, top chassis Venting, impedance matching, spring loaded connectors accept up to 12 gauge, brushed aluminum face plates with selection of preprinted room labels, independent Channel grounds, 8.5"W x 2"H x 6.25"D.

• Designed for high audio quality and long-term reliability
• Provides impedance matching and automatic overload protection Compatible with high-power amplifiers
• Bypass mode allows direct speaker switching when using remote impedance-matching volume controls
• Brushed aluminum face plates
• Selection of preprinted room labels

User questions & answers

Question:	I want 4 atmos speakers. can i connect this to the receiver's 2 outputs(r&l) to get 4 (front & back, r&l) atmos speakers to work
Answer:	Single input (left and right), four outputs (left and right). Best way to visualize it is look at the picture of the back of the unit on the Russound site - https://www.russound.com/products/connectivity-and-control/speaker-selectors/single-source/ss-4-2-4-pair-single-source-impedance-matching-speaker-selector#features
Question:	Can the SS-4.2 be connected to speaker A on a receiver and speaker B be connected to another speaker selector switch
Answer:	I don't know. Are you talking about the receiver for speaker A and speaker B? My russound is hooked up to the dual receiver as zone 2 and then 4 speakers are hooked up to the russound for surround sound thruout the house and zone 1 on the dual receiver is used for surround sound for my TV setup. If you have any more questions please get back to me Richard K.
Question:	Can you play all the four zones speakers together
Answer:	I only have 3 zones and they all play fine.
Question:	Can you connect to amps to switch between speakers
Answer:	If you are asking if two amps can be connected to this box, I believe the answer is "no, one amp and up to four pairs of speakers.
Question:	Can the sp 94-v switcher work in reverse: 2 4-channel receivers and 2 sets of speakers? i want to use the same speakers for both amps/ like bi-wire
Answer:	Since the “Amazon 2x4 selector” is basically a switch box (completes the amp to speaker pair circuit you want) my gut says yes. But since you would be reversing the intended signal direction I can't comment on if auto impedance correction and overload protection, or even volume control will perform properly. And by reverse signal direction I mean to get your desired 4 amps mapped to 2 speaker pairs (4x2) rather than the intended 2 amps mapped to 4 speaker pairs (2x4) you would have to reverse your cable hookups on the back of the “Amazon 2x4 selector”. In other words you would have to connect your amp1, amp2, amp3, amp4 to “Amazon 2x4 selector” speaker1, speaker2, speaker3, speaker4 output jacks. And also connect your speaker1, speaker2 to “Amazon 2x4 selector” amp1, amp2 input jacks. Now with this configuration the “Amazon 2x4 selector” A/B amplifier button next to each volume knob will really be your speaker1, speaker2 selector. And your amplifier selector will probably have to the amplifiers themselves since you would want avoid sending more than 1 amplifier signal to any one speaker pair. Setting a volume knob to zero will may also accomplish this but I can’t be sure. Now what is the risk in trying this? Since the “Amazon 2x4 selector” is not powered (no power cord/supply directly to it) I think it is low. If it doesn't work you still have a really good 2x4 capability with auto impedance correction and overload protection. And if you are really persistent you could get (or build) two very simple 4x1 selectors. Label one of them A and one B. Connect all four amps to A selector and all four amps to B selector. Then connect A selector to Amp A input on “Amazon 2x4 selector” and connect B selector to Amp B input on “Amazon 2x4 selector”. Good luck. I applaud you desire to get it the way you want.
Question:	Can this one protect speakers not overloaded from high wattage amplified
Answer:	Not sure that I understand your question. This will provide protection for wattage more than 100 watts RMS, with peaks up to 200 watts. If you have a low wattage amplifier and the amplifier distorts due to being overdriven, the speakers are at risk of damage.
Question:	How is impedance affected if I connect only one speaker per channel (4 in total) instead of the full pair
Answer:	This speaker selector is 'Impedance Correcting' so whether you are connecting only one speaker in the pair, say the Left Speaker, or both speakers in the pair, the impedance will not be affected. Impedance affects each channel, not pair. In other words, only the Left Speakers will affect the impedance for the Left Channel, regardless whether the Right Speaker is hooked up or not, but with this Speaker Selector and its 'Impedance Correction', it will adjust the impedance to stay above 4 ohms.
Question:	How is the best way to hook this up to a receiver in the input section? ARe banana plusg also needed for connection to the receiver
Answer:	I did mine with banana plugs. It's the easyest way to do. I got mine from amazon and they are way cheaper then Best Buy. I have a surround sound system with another b option. I used that. If you have a regular receiver then use all your main speakers as A or B or both depending on your receiver. If you have a option c speaker that is what you use. If you only have A & B then you main speakers will be A. Then take Speaker B and connect it to the main speaker Selector. From there you can start using speakers from other areas and plug them in. Note the speaker wires from other rooms like m.ine should be from the attic inside the wall behind the receiver, or what makes your rooms easy for you. I also purchased wall banana plug outlets from Home Depot, Best Buy for your buck. The system works great and is the best I have ever owned. It also protects your receiver from blowing any fuses. It's a click by click system that helps you control each area egual. Hope thi
Question:	Why do none of these units have a remote control
Answer:	To keep cost down
Question:	what are the exact dimensions of this
Answer:	17" wide5-1/4 deep2-1/4" highGreat device!!!
Question:	Will this device handle 135w of power from our new sony strdh130 2 channel stereo receiver? What gauge speaker wire do I need to buy
Answer:	Should be ok, nothing bigger than 14 gauge
Question:	Will this work with a 70v amplifier and speakers, or just 8ohm
Answer:	I have not tried that but it should work. I would not engage the protection button since there is no impedance problem with 70 volt systems.

Product description

Distribute your music to every room in your home with this 4 Channel speaker selector from Monoprice. This 4 Channel speaker selector allows you to distribute your audio signals to up to four different speaker zones. An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant no matter how many speakers are in use. This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place.

• Distribute your music to every room in your home with this 4-Channel Speaker Selector
• llows you to distribute your audio signals to up to four different speaker "zones"
• This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place
• An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant, no matter how many speakers are in use
• Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.

User questions & answers

Question:	will the Monoprice 109995 accommodate 14 gauge wire
Answer:	According to the user manual, it can accommodate up to 14 AWG.http://www.monopricehub.com/files/manuals/9995_Manual_130103.pdf
Question:	the output of my Denon 1912 is 90W per channel. This is rated at 70W. Can it support my Denon
Answer:	My Pioneer Elite (Model VSX53 if you want to double check the specs) is rated at 110 w/channel and this splitter works just fine. I've had no issues.
Question:	Can I use this in reverse? Multiple amps to one pair of speakers
Answer:	In theory you can. Use the speaker select switches to hook up the amplifier speaker outputs. Hook the one set of speakers you wish to share to the connector labled amplifier input. But be warned DO NOT select both amps at once. If you are lucky, you will blow the speaker fuse, if it’s got one. At worst you will trip the amp protection circuit or blow an internal fuse.
Question:	can you run all 4-channels at the same time
Answer:	I could not get the darn thing to work at all. I bought a NEW Denon 5+1 receiver and had extra cables to outiside deck speakers (should have gotten 7+1) that could not hook up as I had four surround plus sub and center channel in LR. Thought this would allow me to get the outside speakers working like a splitter that I could turn on and off. Was wrong or either not using correctly but does not very complex. I pushed every single combination of buttons and never got any sound to go through outside OR inside.

Product features

Monoprice 4-Channel Speaker Selector - Black Up to 140W Per Ch. Distribute Speakers, Perfect for Home Theater Audio

Distribute your music to every room in your home with this 4-Channel Speaker Selector from Monoprice!

This 4-channel speaker selector allows you to distribute your audio signals to up to four different speaker "zones". An optional impedance protection circuit ensures that impedance seen by your amplifier remains constant, no matter how many speakers are in use. This switch can support up to 70 watts per channel with the protection circuit enabled or up to 140 watts per channel without the protection circuit in place.

Product description

Niles SS-4 speaker selector

• Niles SS-4 speaker selector
• Separate left and right ground paths for compatibility with all amplifiers, including Bridged designs
• Removable Screwless connectors accommodate up to 14-gauge wire. Rugged all metal chassis construction.
• Non-skid feet won't scratch furniture and ensure unit stability during operation 72 adhesive-backed room identification labels requires an amplifier that is compatible with a 4 Ohm load
• 10 year limited
• Handles up to 100 watts per channel RMS
• Protection circuit safeguards receiver / amplifier

User questions & answers

Question:	My amplifier is capable of one pair of 4 ohms load. Can I use this to connect 2 pairs of speakers, each pair are 4 ohms load
Answer:	No
Question:	watts per channel handling.—Does this mean the input can only be 100 watts or that her output can be 100 watts per channel from 400 watt source
Answer:	It means that the maximum input can be 100 watts per channel. Now if you have a 400 watt amplifier, it can still work as long as you don't crank it up past 100 watts output.
Question:	I have a receiver Denon E400 that has 175W per channel, worked well with these speaker selector
Answer:	What matters is the impedance. Most Amps are 8 ohm as are speakers. When you hook multiple speakers in parallel the impedance goes down. The selector ensures that the impedance is at least 4 ohms even when as many as eight speakers are hooked in parallel (and would otherwise present 1 ohm of impedance). On my Yamaha receiver there is a switch that allows for a 4 ohm load and that is the key. You can probably run a 4 ohm load from an 8 ohm driver, it just means that more energy is dissipated in the amp than in the speakers but hopefully not so much as to do damage
Question:	Can I control volumes on two different speakers independently with this device
Answer:	No, there's no volumes controller on this device. You need a controller like ''Niles VCS100R White FG00956 100 Watt InWall Volume Control " (http://www.amazon.com/Niles-VCS100R-White-FG00956-Control/dp/B0001W1I58/ref=pd_sim_e_3) for each pair of speakers.

Product description

XtremPro 2 to 4 way speaker switch, 1 in 2 out to 1 in 4 out way pair stereo speaker selector w/ terminal clamps metal non-slip box - Black Features: the product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. amplifier inputs x1 speaker output x2 or x4 load: 150 W per Channel Cable cross-section: max. 2. 5 mm² loudspeaker resistance: 4 - 16 ohms package contents: main unit x1 user manual x1 connection: failure to observe the following instructions can lead to damage to the product, The loudspeakers, and the amplifier. Turn off the amplifier; before connecting the cables. Check all cable connections before turning on the amplifier. Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. Use Suitable loudspeaker cables only. Connect passive loudspeakers to the loudspeaker outputs only(No active loudspeakers). connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. Refer to the user manual of the amplifier and the loudspeakers concerning their respective; technical data and any special information concerning their connections.

• 2 or 4 channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
• Ideal for low cost Distributed audio in residential or commercial sound applications
• Individual control of each speaker pair. Impedance constant at 4-16 ohms, 150w(per Channel), 300W max, Cable length: Max 164ft/50m
• Just hooked up to the stereo. No extra power supply needed
• Metal non-slip box, 5in x 3in x 1. 5in (2 way) and 9in x 3in x 1. 5in (4 way)
• Connector Type: HDMI

User questions & answers

Question:	If both speakers are on, would the impedance be similar to running two in parallel? A pair of 4 ohm speakers would draw 2 ohms
Answer:	When unscrewing the banana plug the inner hole can accommodate up to 4 mm plug .
Question:	Can i push 300rms through this
Answer:	The short answer is no. You will be taking the high level output from your first amplifier to the low level input of your second amplifier. At the least this will result in distorted sound. At worst you will damage one or both amplifiers.
Question:	ga wire is too big . What size banana plugs can I use and would right angle ones work best
Answer:	Yes, for left and right. I switch my main pair of speakers between one amp for my turntable and another amp for surround which also uses that same main pair in addition to a center and a sub. In other a pair of speakers can switch between two amps.
Question:	What is Max gauge wire
Answer:	Must be a mistake. There is no HDMI

Product description

The Monoprice ss-pro 12 is a powerful and efficient dual source, audiophile grade speaker selector for up to 12 pairs of speakers. Featuring robust transformers, the ss-pro 12 allows you to play all 12 pairs of speakers at once without damaging the amplifier, and is able to withstand up to 300 watts peak of power per channel. A front panel a/b switch allows you to choose between two amplifier sources, and easily removable Snap in connectors make installation easy. A rotary switch located on the rear panel can be used to set the appropriate impedance based on the number of pair of speakers connected.

• 12-Zone speaker selector that allows you to connect up to 12 pairs of speakers or 12 listening zones and control each zone with front panel push-buttons.
• Utilizes audiophile-grade impedance-matching transformers to safely distribute maximum power throughout your system.
• Easy to use front panel switch to choose between sources.
• Includes 6 shingle clips and 2 Spacers.
• Turns on when at least 10in of sensor wire detects moisture and has a temperature of +39.2 degree F. Turns off at +44.6 degree F or no moisture is detected.