14 best audio speaker switches
Audio speaker switches, particularly selector switch boxes, are devices designed to manage and control multiple speakers in an audio system. These devices allow users to choose which speakers are active at any given time, making them valuable in situations where there are multiple sets of speakers connected to a single audio source. Here are key aspects related to audio speaker switches:
Selector Switch Boxes: Selector switch boxes are devices with multiple input and output terminals. They typically have a rotary switch or push-button mechanism that allows users to select which set of speakers receive the audio signal.
Multiple Speaker Outputs: These switches can handle connections for multiple pairs of speakers. The number of speaker outputs depends on the specific model, ranging from two to several pairs.
Impedance Matching: Some advanced speaker switches provide impedance matching capabilities. This is important for ensuring that the overall impedance seen by the amplifier remains within a safe range, preventing damage to the amplifier and maintaining sound quality.
Parallel or Series Connection: Speaker switches can be designed to connect speakers in parallel or series. Parallel connections maintain a consistent impedance, while series connections allow users to control the overall impedance for different speaker combinations.
A/B Speaker Switching: Many selector switch boxes feature A/B speaker switching. This allows users to choose between two sets of speakers. For example, users can switch between speakers in different rooms or between indoor and outdoor speakers.
Volume Control: Some models include volume control for each set of speakers independently. This feature is particularly useful when different pairs of speakers are in different locations or have different volume requirements.
Quick and Easy Setup: Audio speaker switches are designed for easy installation. Users typically connect the input from the amplifier or audio source to the switch and then connect the various pairs of speakers to the output terminals.
Compatibility: It's important to ensure that the speaker switch is compatible with the impedance requirements of both the amplifier and the connected speakers. Some switches may have specific impedance ratings, so users should check these details before purchase.
Dedicated Amplifier Outputs: Advanced speaker switches may offer dedicated amplifier outputs for each set of speakers. This can provide additional flexibility in configuring the audio system.
Protection Circuitry: Certain speaker switches include protection circuitry to safeguard the amplifier and speakers from damage. This may involve automatic impedance matching or built-in circuitry that prevents overloading.
Application Scenarios: Audio speaker switches are commonly used in home audio setups, allowing users to distribute audio to different rooms or zones.They are also useful in retail environments, offices, and other spaces where audio needs to be directed to specific areas.
Durability and Build Quality: The build quality of speaker switches is important for long-term reliability. High-quality materials and construction contribute to durability and optimal performance.
In summary, audio speaker switches, particularly selector switch boxes, provide a convenient and efficient way to manage multiple sets of speakers in an audio system. Their features, including impedance matching, volume control, and A/B switching, make them valuable tools for customizing audio setups in various environments.
Below you can find our editor's choice of the best audio speaker switches on the market
OSD Audio 4 Zone Speaker Selector Switch Impedance Protection ISS4
- SOUND QUALITY: The High Power Speaker Selector is an effective way to distribute music to four listening zones and play any pair. It is constructed of 16-gauge steel with a durable black powder coating and gray silk-screening.
- POWER: The ISS4 includes selectable impedance matching protection circuitry allowing a single amplifier to power multiple pairs of speakers and up to 70W per channel with engaged protection.
- CONNECT: The phoenix connectors on the ISS4 are easily removable to give better leverage when terminating the cable. With screw-down terminals, the speaker wire will never come loose.
- IMPEDANCE PROTECTION: With the ISS4's impedance protection, one receiver or amp can safely power several pairs of speakers. Run 140 watts per channel total input power without engaging the manual protection.
- EASY INSTALLATION: The low profile design easily fits into a cabinet or equipment rack in the home to have effective placement when connecting the cables to the selector switch and has individual on/off selectors for each zone.
User questions & answers
| Question: | My Yamaha Receiver (750) has A and B speaker outputs. Would I connect the ISS4 inputs to the B outputs and then run 4 separate speaker pairs from the B side of the receiver leaving the A side for the main listening room speakers |
| Answer: | Hi, good day. Yes, these 12 pack tumblers all come with 12 straws, 12 straw bushers and 1 cup brusher. Have a nice day! AWE-US Direct |
| Question: | I can see how to select zones, how do you select the source? I have a phono amp and home theater amp I need to switch between, one set of speakers |
| Answer: | Not sure but good quality |
| Question: | Can I run the 6 pairs of speakers at the same time? If this can be done, the volume drops |
| Answer: | Dear Sir or Madam, Thanks for your question. This travel tumbler set comes with one cup brush. And we suggest you wash it by hand with the cup brush. The dishwasher may rub the tumbler, and then make the tumbler not keep warm. Have a nice day! BY CozyHome Direct |
| Question: | I've bought this and I have connected it to 4 zones of in-wall speakers but the volume is extremely low! Do I need a receiver before the input |
| Answer: | Dear Sir or Madam, Thanks for your question. This stainless steel travel tumbler set of 8 come with 2 lids for each tumbler ( 1 sliding lid and 1 lifting lid). As you said, there is a straw hole and a sipping hole on the lifting lid. BY CozyHome Direct |
Product features
Dual Source
The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.
Volume Control
Using the same technology as our in-wall volume controls, most units offer volume control per zone.
Impedance Protection
Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.
Easy to Install
Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.
OSD Audio 4-Zone Single Source Speaker Selector
The ISS4 high power speaker selector is an easy and effective way to distribute music to up to four listening zones (four pairs of speakers) and play any pair, a combination of pairs, or all pairs simultaneously. Easy to connect with a low-profile design that easily fits into a cabinet or equipment rack.
4 Channel Speaker Selector Switch - Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Amplifier Receiver System - Pyle PSLSW4
Pyle
Product description
Pyle Model : PSLSW4
4-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System
Features:Technical Specs:
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
- CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
- INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
- EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
- OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability
User questions & answers
| Question: | Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you |
| Answer: | Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps. |
| Question: | I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together |
| Answer: | Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps. |
| Question: | Can the speaker connectors take banana plugs as opposed to threading the wires |
| Answer: | I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly. |
| Question: | So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to |
| Answer: | Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though. |
Product features
4-Ch. Speaker Selector System
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.
CONTROL 4 SPEAKERS
The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
INDEPENDENT AUDIO CONTROL
Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.
EASY SETUP
Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
Protection
Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.
Watt
The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
Dimensions
The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.
Nobsound Little Bear MC102 Mini 2(1)-in-1(2)-Out 3.5mm Stereo Audio Switch Audio Switcher Passive Speaker Headphone Manual Selector Splitter Box Audio Sharing (Red)
- 2-IN-1-OUT 3.5mm Audio selector designed for customers having several audio sources and outputs
- How to use: ① connect two audio sources (like CD player / computer) to A/B ports and one audio output (like speakers) to IN/OUT port; ② connect one audio source to IN/OUT port and two audio outputs to A/B port
- Main functions: ① select audio input between A and B with A/B siwtcher and get one output; ② select audio output between A and B to receive one input
- Volume control; One key to mute; Super small size; Passive device; No power needed; Won't affect sound quality
- Prompt and Courteous Customer Service: Life-limited warranty.
User questions & answers
| Question: | Will this be able to serve as a mute and volume control with an android phone and a headset |
| Answer: | I am not sure, but It could be helpful. I’ve has some skin surgeries from cancer. I have used it on them and they have significantly reduced the scarring from the incisions. It has faded them, reduced the redness and made them smooth. |
| Question: | I get a audible hum noise when I send my Mac output to my two channel system is there a simple solution for this |
| Answer: | This serum is too help remove scarring. To my knowledge not for sun bathing. Yes, it significantly helps if you have a bad scar. |
| Question: | Can this run 2 audio in & 1 audio out, both inputs need to be active |
| Answer: | Hi, good day. Yes, you can use oracle vinyl to decorate those sliver tumblers. But you can't use oracle vinyl to decorate those rose gold tumblers. Have a nice day! AWE-US Direct |
| Question: | Idea: IN 1-> bluetooth adapter to connect laptop. IN 2-> turntable. OUT-> 2.1 stereo. I want ability to switch between inputs. Will it work |
| Answer: | Hi, friend. Thanks for your question. Sorry, we don't konw the meaning of "monogram". But the letters are printed on the tumbler. If you have any questions, please inform us freely. |
Product features
Nobsound Little Bear MC102
Parameters:
- Interfaces: 3 * 3.5 mm jack
- Knob and key: 1 * volume knob; 1 * A/B selector; 1 * mute botton
- Dimensions (L * W * H): 82 * 55 * 20 mm / 3.23 * 2.17 * 0.79 in
- Weight: 100 g / 0.22 lb
3.5mm Computer Volume Control Switch, DROK PC Speaker Headset Audio Volume Controller Headphone Sound Switchable Giant Volume Adjuster Knob with 3.5 mm Microphone Interface and 5 Feet Cable
DROK
Product description
Connection:
Plug your headset into a jack on the side of this audio switching, then the black cord connects to your speakers, the green one connects to your computer and the red one connects to microphone jack on your computer.
Audio Switchable:
There is a nice switch on the side of the Wire Controller that toggles between outputting the sound to your headset or the external speaker.
You never have to plug or unplug your headset again. Nor will you ever have to mess with your sound settings on the computer again - instead of this awesome, big honking physical knob on your desk.
Volume Control:
The entire top of the Wire Controller is one big, physical volume control knob, you can both control volume of your computer speaker and headset.
1. First end up setting it up so full volume flows out of the computer,
2. then adjust the volume level you actually want using this big knob, which is way easier than hunting for the setting on your computer.
No more getting your eardrums blasted out when you accidentally put on headset with the computer volume all the way up.
Note:
1. The volume control knob has a very nice smooth feel, please don't force to turn it.
2. Please don't use this item in damp environment, although the product has been packaged with waterproof material, the components may also be broken in damp environment for a long time.
Package Includes:
1 x Microphone Audio Switch Converter
- DROK microphone audio switch converter has a manual switch on the side, which allows you to toggle signal between computer audio or the headset audio, you never have to plug or unplug your headset again.
- The volume controller is with microphone function, connect microphone wire of your headset to red jack and another to green jack on the side; Three different plugs to computer audio output, microphone and speaker.
- Our volume adjuster switch is designed with 1.5m long cable, and no extra wires hanging out; No loss of sound quality; Solid and well made, nice big volume control dial that you can place just where you want it.
- The entire top of this is one big, physical volume control knob, has an excellent size and a very nice smooth feel, you can both control volume of your computer speaker and headset.
- A good choice for you to own this awesome and decent product if you use both headset and speakers on the same computer frequently, it allows you to switch between the two effortlessly.
User questions & answers
| Question: | How does this hook up to powered speakers? Where does the 3.5 jack from the existing speakers plug into |
| Answer: | The TS6d works like a champ. I have the same situation where my amp only has 1 output. I drive 5 separate sets of speakers within my house. Can turn each set off or on independently of each other. Would highly recommend. |
| Question: | Can the switcher switch between two sets of speakers rather than between a headset & speakers |
| Answer: | this is a standard speaker selector box / splitter and will work with any receiver |
| Question: | I've had an issue where a similar product echoed some of the audio into the microphone on some sound cards. Is this one prone to that |
| Answer: | NO, this unit cannot be bridged |
| Question: | Is there any mute function to the volume adjustment and/or does setting it all the way down effectively mute the sound |
| Answer: | the signal goes from the receiver to the selector box and up to 4 pairs of speakers from the selector box |
| Question: | To the seller of this product: my package is missing the "quick start guide". anyway to get me one? thanks in adavance, master bear |
| Answer: | I have that unit on my houseboat hooked up to two different audio recivers going to the same speakers so I can switch music from the top deck to the bottom head audio unit to the same outdoor speakers. Works great. The inputs are a little small to work but all good when done. |
| Question: | What product can I use in the handfree slot |
| Answer: | We bought this to control the four sets of speakers we have in our house, other than the sound system for our TV. We have speakers in different locations and this helps control the sound for each location. I hope that helps. |
| Question: | Can I use this with a 7.1 headset and still have |
| Answer: | Yes each of the 4 zones have a push button switch to individually select source A or B. |
| Question: | I want to have a triple switch box for my computer, ipad and iphone, that lets me avoid having constantly plug in headphones. Suggestions |
| Answer: | No. |
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
3.5 mm Audio Switch Box by 4minds | 2 Ports Stereo Manual Splitter Box AUX Audio selector | Computer Speakers Headphones Jack Passive Switches 1/8 in | 2(1) IN - 1(2) OUT + Bonus 15 in (38cm) cable
Product description
✓ SIMPLE, FUNCTIONAL and STYLISH
Are you tired to plug and unplug, day by day, the audio cables from your computer or laptop to listen to your favorite music in your speakers or headphone? Here it is.
It took us more than 23 months "destroying" and clicking on more than 11 different prototypes to design it.
We really hope you will enjoy using our Audio Switch Box as much as we enjoyed creating it.
✓ NATURAL MATERIALS
Are you sick of all the plastic around us? Don't you think there are too many things made of plastic in our daily life? We can agree on that! That's why we created this box from natural beech wood. Our PCB components are lead-free.
✓ HANDCRAFTED AND CAREFULLY ENGINEERED
Each box is unique and handcrafted so you'll never find 2 identical. However, they are carefully engineered to ensure that each of them meets our technical criteria of quality, size, and functionality.
✓ COMPATIBILITY
Works with any device equipped with a standard 3.5mm audio jack or AUX-in port.
- Dimensions: 1.8x1.8x1.1 inch (45x45x27 mm)
- Weight: 1.7 Ounce (50 Gram)
✓ SATISFACTION GUARANTEE:
Our Audio Switcher gets improved - no more stuck button. After remodeling the button, to take into account the shrinking of the wood, and applying much more love in the assembly process, the button slides now seamlessly in its place.
Since September 2019, the updated and improved version it's available on the market.
Related to the "ground loop" (noise) issue. To solve this, it is advised to connect all audio devices to the same AC wall socket with the help of a power strip.
We're trying to make sure that all of our customers are happy and that's why we will take responsibility for any inconvenience. Just drop us an email: hello at 4minds dot co. Anytime. We will be more than happy to assist you.
- A WONDERFUL SMALL AUDIO SWITCH BOX to easily select between speakers and headset to listen privately or answer calls; designed with a simple button to switch between several audio sources/input and output - 2 OUT - 1 IN or 2 IN - 1 Out
- SIMPLE TO USE: Just plug it in and push the button - No power needed, No software to install, No setup, Won't affect sound quality, Passive device selector. Forget about unplugging your speakers or headphone each time you want to switch the sound device, just press one button
- NATURAL MATERIALS - Our box is made from natural beech wood with trustworthy lead-free components; Stylish and Ergonomic - a simple ABC audio switcher with a MINIMALISTIC and ELEGANT design, featuring a Big Comfortable easy to push button. This audio splitter box is Specially Designed to fit perfectly in any environment, be it your office or home. Originally packed in an EXCLUSIVE BOX, it’s perfect as a GIFT. Surprise your audiophile friend with an elegant, genuine and exclusive gift
- HOW IT WORKS: 1 - Plug any audio input sources (devices like Computer, PC, Notebook, Mobile Phone, CD player, Tablet) in jack A and switch between the two audio Output devices B or C (Speakers, Headphone, Soundbar, Earphone, Headset) with one simple push of the button; 2 - Select the audio input source B or C to be played in the audio output device A with the same push of the button
- ORDER NOW WITH NO RISK - Buy smart from 4minds for your 100% SATISFACTION GUARANTEE. We, 4minds, manufacture only high-quality products. If you’re not satisfied with your audio control switch - we will replace it and/or you will receive 100% of your MONEY BACK - No question asked!
User questions & answers
| Question: | My output is failing, how do i go about getting warranty service with my order? 4minds doesn't seem to have any contact details. Thanks |
| Answer: | Yes. Once the stab falls off (as it should naturally), then you can keep applying the serum to remove the redness left over from the scab. |
| Question: | Is there any sort of indicator to which input/output is selected |
| Answer: | I have been using this for twice a day for approximately 4 months and have not noticed a difference in my scar; however, my scar is deep due to having a large mole removed. Nonetheless, I have noticed that it helps with discolored, blotchy skin and wrinkles. |
| Question: | I have a desktop PC, a turntable and one set of speakers. Would i be able to use this to switch the input (pc or turntable)that is going into speaker |
| Answer: | Wow, it's been 4 years since I used this product...was not impressed, but they could have changed it by now. |
| Question: | Can this be used to switch between speakers (3.5mm out) and a headset w/ mic (single 3.5mm in/out |
| Answer: | From what I understand, repair serum is what helps repair the skin that has been affected & scar serum helps with the color change from the scar itself. I've been using this for a few months now & can tell a huge difference. |
3.5mm Stereo Audio Switch Audio Switcher, Passive Speaker Headphone Manual Selector Splitter Box Audio Sharing (2-IN-1-OUT/1-IN-2-OUT)
Oneme
Product description
3.5mm Audio selector
This is a bidirectional switcher for 3.5mm audio ports.
3.5mm audio selector designed for customers having several audio sources and outputs.
Main functions:
① Select audio input between 1 and 2 with 1/2 switcher and get one output;
② Select audio output between 1 and 2 to receive one input;
How to use:
① connect two audio sources (like CD player / computer) to 1/2 ports and one audio output (like speakers) to IN/OUT port;
② connect one audio source to IN/OUT port and two audio outputs to 1/2 port.
Features:
Easy installation and simple operation.
Only need to lightly press to mute the device; very useful under special conditions.
Plug and play; No power supply and other software required; Won't affect sound quality.
Analog signal maximum support 2V p-p input and output.
Input and output frequency range: 20Hz ~ 20KHz.
Use standard audio cable, input transmission distance up to 8 meters, output transmission distance up to 8 meters.
Super small size; Compact and super mini size; Easy to place and suitable for your desktop and office.
Note: Only three-segment headphones are supported (four-segment headphones are not supported)
Package contains:
1* 3.5mm Audio Switch Switcher
1* 3.5mm Audio cable
1* User manual
- 2-IN-1-OUT/1-IN-2-OUT Mini 3.5mm Audio selector designed for customers having several audio sources and outputs
- ① Select audio input between 1 and 2 with 1/2 switcher and get one output;
- ② Select audio output between 1 and 2 to receive one input;
- One key to mute; very useful under special conditions
- Plug and play; No power needed; Won't affect sound quality
User questions & answers
| Question: | Can i use this with ps4 gaming headset and pc speakers as the two outputs so i can hear from both |
| Answer: | I don't think so, for me I applied at first and then I applied a regular handcream and it definitely does not interfere or cause any adverse reaction. My scars have definitely diminished. Good luck! |
| Question: | So, I have two different amps, each running different equipment, but one set of speakers. So this is what I use |
| Answer: | Yes it helped with diminishing minor scars/dark spots. But sure about the enlarged pores. |
| Question: | Does it coming a male-male 3.5 mm audio cable |
| Answer: | They are both quite different. I can only speak for the Scar Serum which has ingredients that get down deep into the scar. That is the point of the Scar Serum. I would think you can use both if you wanted to. |
| Question: | Would I be able to use my headphone and soundbar at the same time on my computer |
| Answer: | No. It doesn't really have a smell, but it will leave the skin soft and it seems to work ok with scars. I've had to use it for over a year to improve my scar. Nonetheless, my scar was from mole removal, and the removal left a large sized "divot." |
Nobsound MC1024 2-Way Microphone Headset/Speaker MIC Audio Switch Hub Switcher 3.5mm 4-Pole MIC A&B Selector
Product description
Button Function and Wiring:
A/B Selector: used to connect the headset to A (PS4, Xbox, MAC, Nitendo etc.) or B (Computer, Phone etc.)
Volume Control: to control volume of headphones and multimedia speakers but cannot control microphone
Mute Button: Mute both the microphone and headphone (with a set switch) or the microphone alone (can hear others while others can't hear you)
Output Setting Switch: Set the audio output to be a headphone or a speaker
Wiring: Microphone cable of the headset => red jack; The other cable => green jack; A & B => two different devices like a computer or game console; External powered speaker => speaker output port output port (please refer to the image)
Packing List:
1* MC1024 Audio Switcher
2* Headset Cable
1* 3.5 stereo audio cable
Application Scenarios:
1.For game players: Can easily switch between a gaming computer and a game console. And you can also switch between the headset and the speakers freely when you are tired of hearing with a headset. The mute button is also very practical while answering call or communicate with others.
2.For bloggers chatting on-line: most bloggers have more than 2 chat website accounts. This switcher also can be used between two chat software or devices. You can wasily switch between your computer and phone to communicate with different people.
3.For work meetings: If a desktop computer and a laptop are at work at the same time, the MC1023 can easily switch between your desktop and laptop voices.
4.For music studio: This converter can easily switch between two different sources to a recording device to achieve mixing effect. (Note: The headphone jack and microphone interface are stereo so there are 4 channels of audio signals that can be simultaneously switched).
- Difference between MC1023 and MC1024: Some devices have two audio outputs -- one for AUX output and another for MIC output, then you can use MC1023. While some devices' AUX and MIXC outputs are integrated, then you need to use MC1024.
- If you often need to switch your headphones, microphones and multimedia speakers between two devices, and also need volume control and microphone mute, then this is what you need.
- The Little Bear MC1024 is a 2-way audio and microphone A / B converter with full function which allows you to quickly switch between two computers or game consoles without having to plug in/out your headphones, microphones and speakers.
- What's more, with ultra-small size, A / B selector switch, volume control, one-button mute button, mute setting and output setting switch, it can meet most of your needs.
- Direct replacement or refund for defective devices. Prompt and courteous customer service.
User questions & answers
| Question: | Will this connect my speakers and also a headset (with mic) to my PC? I want to be able to switch between speakers for music and talking on my headset |
| Answer: | You can control up to 4 sets of speakers independently or play all at the same time! I have switch A for patio speakers, switch B for inside house, sometimes I play A or B or A+B |
| Question: | Is there any way to fix the mic echo |
| Answer: | In modern amplifiers the protection button is actually used to simulate a safe ohm load to the amplifier, not mask the lack of a load. When you connect multiple speakers of certain ohm ratings in series or parallel, it alters the ohm load presented to the amplifier. The switch allows you to attach multiple speaker sets while presenting and "buffering" a consistent/safe ohm load instead of the actual load. 2 x 8 ohm speakers in parallel on the same channel would show up as 4 ohm (divide ohm rating of speaker by number of speakers), which could cause your amplifier to fail (it needs to work harder) if not designed to drive speakers with that ohm rating. If you are using more than 2 pair of 8 ohm speakers simultaneously you would turn on the protection mode to present an ohm load of ~4 ohm instead. Most protection solutions present a 4.5 ohm load in this scenario. Understand that ohm loads are AC and thus are constantly fluctuating during playback. Speaker ohm levels typically will "change" @ different volume levels etc. Low impedance allows for a more efficient electric signal. Typically speakers are rated 4, 6 or 8 ohms. Lower end receivers can sometime have issues driving low impedance 4 or 2 ohm speakers. |
| Question: | Will this output both mic and channel a to speaker (center)? trying to connect my mic with ps4 party and combine the 2 to output |
| Answer: | Hello Dan,This device is for other areas of a home where you have additional speakers and is not made to be used with the surround sound system. It can be used with "Stereo Receivers" or with 7.1 A/V Receivers where your only using the 5.1 portion of the receiver. What that means is if you have a surround sound system in your home, then all the speaker outputs of the receiver are dedicated to the surround sound and at that point there are no more speaker terminal outputs to be used.However, if your receiver is a 7.1 A/V receiver and your only using it as a 5.1 Surrond Sound System, then you will have 2 additional speaker outputs that aren't being used.At that point you can attach those terminals (via 2 speaker wires a left & a right) to the Pyle 4 Channel Speaker Selector. Now connect the other rooms to the outputs on the Pyle Speaker Selector. ***Make sure you have the correct speakers paired to each individual room when you connect these wires. You can easily determine this by taking a battery from your remote control and placing the ends of the speaker wires to the battery. Positive end of the wire + to the positive end of the battery and the negative end off the same wire to the negative end of the battery, You can hold the negative wire tight to the battery with your thumb while you release and then retouch and release and retouch the positive end a few times. you should hear a popping sound coming out of the speaker. This will let you know which wire goes to which speaker in which room or area. I usually use a "Sharpie" Marker and label the wire "Living Rm" or "Dining Rm" or what ever the room is that the wire goes to. *****Now, and this is most important or you will "FRY" your Pyle unit, make sure the negative wire that is connected to the Pyle output is the same negetive wire that is connected to the speaker terminal in the room where that wire goes and the positive does the same. IF YOU CROSS THE WIRES AND PUT THE NEGATIVE WIRE IN THE POSITIVE TERMINAL, YOU MOST LIKELY WILL GET BAD RECEPTION TO THAT SPEAKER OR FRY (DAMAGE) THE PYLE UNIT AND MAYBE EVEN YOUR RECEIVER. ALSO, MAKE SURE NO BRAIDS OFF OF THE SPEAKER WIRES TOUCH THE CHASSIS OF THE RECEIVER OR EACH OTHER. THIS WILL SHORT THE UNIT.Finally, you may have to go into the setting of your A/V Receiver and select the "Speaker Settings" and scroll to where the "Surround Back" or "Zone 2" Speaker set up is and select "NO". This will deactivate the use of those speakers to be used in the room where the Surround Sound is and will allow them to be used for "Stereo Music" to other rooms.In about 90-100% of all A/V Recievers have to use "Analog" or "RCA Cables" from the device you want to hear the music or sound from in the rooms that the Pyle is hooked up to. FM Tuner (or radio stations), Pandora and Internet Radio Stations are already incorporated in the receiver and will play with no problem.Now just select "Zone 2" on the Receiver and press the "Input" selection you want to hear in those other rooms. Raise the Zone 2 Volume Level for those rooms and you should hear music or audio. Please note that some receivers have a time period of 5-6 seconds for you to do these steps, so when making your audio selection and volume level, know where your audio selection button is that you want before performing these steps or your Receiver timer will time out and you will have to permorm them again. It can be frustrating at first for a novice. It was for me. Sometimes still is. LOLA couple of things to know. I would only use this device if I had "Individual Volume Controllers" in each of the rooms or areas where I want Music or Sound. If you don't, then the "volume level" will be the same in all those areas. Volume Controls allow you to do what they say, they can "Control" the volumes level. If the Music or Sound is too High in one room, it might be too Low in an other room. Volume Controls correct that.If you don't have individual Volume Controls in the rooms where your speakers are, then you want to purchase the Pyle Home PSPVC4 4-Channel High Power Stereo Speaker Selector with volume Control. http://www.amazon.com/Pyle-PSPVC4-4-Channel-Speaker-Selector/dp/B0013CH7UK/ref=sr_1_1?ie=UTF8&qid=1376744129&sr=8-1&keywords=Pyle+Speaker+Selector+with+Volume+Controls If you have any issues getting the sound to pass through Zone 2 of your Receiver, contact the units manufacturer and ask for tech support.I hope this helps.Ken Nichols, PresidentSIGHTS & SOUNDS OF SOUTH FLORIDA, INC.3801 Environ Blvd.Fort Lauderdale, FL 33319305-788-1895 |
| Question: | Could this be used in reverse I/O configuration? I'd prefer the button in the top to switch between headset and speakers |
| Answer: | Really, as long as you are using 8 ohm speakers the volume control shouldn't matter all that much. As long as you are happy with the quality. I got mine from Radio Shack. I've also seen some at Home Depot. I know Amazon carries some also. |
in Wall Speaker Selector Switch - Home Audio 2-Channel A/B Dual Channel Speakers Controller Pod Box - Control and Activates (2) Pair of Indoor or Outdoor Speakers - Pyle PVCS2
Pyle
Product description
PyleHome Model : PVCS2In-Wall / Wall Plate Speaker SelectorIn-Wall Speaker Selector Switch, Wall Plate Speaker Control Features: Convenient Speaker SelectionSimple Push Button Operation Possible Configurations: A, B, or Both (A + B)Terminal Block Speaker ConnectorsUniversal Standard Wall Plate SizeFits Standard Electrical Junction / Gang BoxesCompatible with All Audio / Video SystemsIncludes Decorative Frame Plate Cover120 Watt Load Power HandlingThe Pyle PVCS2 is an in-wall A/B speaker selector switch that installs in a junction box, just like a light switch. This switch makes it simple to direct your home amplifier's audio to two sets of speakers, such as one set indoors and one set outdoors. Activate the A speakers, B speakers, or both. Easy push button operation allows you to activate or deactivate your speakers quickly. The included wall plate frame cover allows for a clean installation for your walls. Take control of the audio with the Pyle PVCS2 Wall Plate Speaker Control Selector Switch.
From the Manufacturer
- EASY TO INSTALL: The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
- PUSH BUTTON OPERATION: The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
- CONFIGURATIONS: Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
- UNIVERSAL COMPATIBILITY: The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall plate frame cover means this switch will unobtrusively blend into your wall and allows for a clean installation on your walls
- Connector type: usb
Product features
In-Wall Speaker Selector Switch
The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly.
PUSH BUTTON OPERATION
The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
EASY TO INSTALL
A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
CONFIGURATIONS
Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
UNIVERSAL COMPATIBILITY
The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
NETmate 2 PORT 3.5mm STEREO Manual Switch Box AUX Audio Speaker selector(Wall Mount Hole Built-in, wall or table available)
Miraview Netmate
Product description
STEREO 2: 1 bidirectional selector The stable button-type 3.5mm STEREO manual selector is a two-way manual selector that can be selected by connecting two audio sources to one speaker or one audio source to two speakers.
- STEREO 2 (input / output): 1 (input / output) selector
- Easy button type STEREO selector
- 1 ~ 2 port: 3.5mm STEREO, IN / OUT port: 3.5mm STEREO
- Non power operation
- Cable not included
User questions & answers
| Question: | can this be reversed to allow two inputs going to one output For example, two sound sources into one headset or speaker |
| Answer: | Take the speakers lines running out of your stereo receiver plug them into the unit . Then you can split the Signal . |
| Question: | Can i have 2 inputs output at the same time? or can you only switch between one or another |
| Answer: | No holes for wall mounting. You would need to make one for it. |
| Question: | Is there any 'pop' sound when switching outputs, as if you plugged in speakers while they were on |
| Answer: | Yes, you have to wire it backwards of course - amps to speaker outputs, speakers to amp input. There are 1.8 ohm resistors in series with the amp output terminals so you will lose some volume. Also, they're only 5w so they won't take much power. I've played movies and CD at normal to loudish levels tho and they barely get warm if at all. I wouldn't turn it up to 11 tho. Finally, you MUST take great care and insure that only one amp is connected at any time. Even an amp that is turned off could be damaged by one that is on, never mind if they were both on. |
| Question: | I bought a way cheaper switch box & boy does it sound like it. It sounds like its playing in a tin can. How do this one fair |
| Answer: | Since the “Amazon 2x4 selector” is basically a switch box (completes the amp to speaker pair circuit you want) my gut says yes. But since you would be reversing the intended signal direction I can't comment on if auto impedance correction and overload protection, or even volume control will perform properly. And by reverse signal direction I mean to get your desired 4 amps mapped to 2 speaker pairs (4x2) rather than the intended 2 amps mapped to 4 speaker pairs (2x4) you would have to reverse your cable hookups on the back of the “Amazon 2x4 selector”. In other words you would have to connect your amp1, amp2, amp3, amp4 to “Amazon 2x4 selector” speaker1, speaker2, speaker3, speaker4 output jacks. And also connect your speaker1, speaker2 to “Amazon 2x4 selector” amp1, amp2 input jacks. Now with this configuration the “Amazon 2x4 selector” A/B amplifier button next to each volume knob will really be your speaker1, speaker2 selector. And your amplifier selector will probably have to the amplifiers themselves since you would want avoid sending more than 1 amplifier signal to any one speaker pair. Setting a volume knob to zero will may also accomplish this but I can’t be sure. Now what is the risk in trying this? Since the “Amazon 2x4 selector” is not powered (no power cord/supply directly to it) I think it is low. If it doesn't work you still have a really good 2x4 capability with auto impedance correction and overload protection. And if you are really persistent you could get (or build) two very simple 4x1 selectors. Label one of them A and one B. Connect all four amps to A selector and all four amps to B selector. Then connect A selector to Amp A input on “Amazon 2x4 selector” and connect B selector to Amp B input on “Amazon 2x4 selector”. Good luck. I applaud you desire to get it the way you want. |
In Wall Speaker Volume Control - Home Audio Smart Speakers Stereo Controller Selector Switch Pod Box - In-Wall Vertical Sliding Control, For Home Theater Indoor or Outdoor Remote Speakers - Pyle PVC2 WHITE/BLUE
Pyle
Product description
PyleHome Model : PVC2
Wall Mount Audio Volume Control
Wall Mount Volume Control, In-Wall Vertical/Sliding Speaker Volume Knob (Impedance Matching)
Features:What’s in the Box:
Technical Specs:
The Pyle Wall Mount Volume Control, In-Wall Vertical/Sliding Speaker Volume Knob (Impedance Matching) - Speaker & Stereo System Control - Convenient Audio Source Volume Setting - Audio and Video System Compatibility - Flush In-Wall / Wall Mount Installation Plate Style - Multi-Position Sliding Soft-Touch Adjustment - Suitable Companion for Hi-Fi Four-Pair Speaker Selector - Perfect for Home, Office or Business Applications - What’s in the Box: - In-Wall/Wall Plate - Decorative Finishing Frame - Mounting Ring/Installation Wire Nuts - Technical Specs: - Universal Standard Wall Plate Size - Speaker Connection: Terminal Block, Screw Type - Speaker Wire Compatibility: Up to 14-Gauge AWG - 100 Watt Power Load Handling - Depth 2.5''.
- EASY TO INSTALL: The Pyle in-wall indoor outdoor stereo volume control installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier to your speakers
- VERTICAL SLIDING OPERATION: The smart speaker controller features a convenient and simple multi-position sliding soft-touch vertical sliding volume control which makes volume adjustments a breeze. Suitable companion for Hi-Fi 4 pair speaker selector
- OPERATION: Set the amplifier's volume control to minimum. Turn on the amp and set its volume control slightly above the normal listening level. To increase/decrease the remote speaker's volume slide the inwall volume control upward or downwards
- UNIVERSAL COMPATIBILITY: The speaker volume control fader selector is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. It also features up to 100 watts load handling power
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls
User questions & answers
| Question: | Could I use this to control volume for one set of speakers wired (two pairs wired) to a Sonos connect amp |
| Answer: | They seem that they work fine. Yiu will just different srews then the ones they provide . |
| Question: | What is the “default” position for the ohms switch? There is no documentation that shows what each switch position corresponds to |
| Answer: | 13.5" x 2.5" |
OSD Audio 100W in-Wall Home Theater Speaker Slider – Volume Control Switch, VMS100 (White/Ivory/Almond)
Product description
Designed for whole house audio systems, OSD Audio’s VMS100 is a heavy-duty yet decorative impedance-matching volume control that is ideal for adjusting the volume of a pair of speakers independently in various rooms of your whole house audio system. Rated at 100 Watts peak with minimal bass roll-off, the VSM100 includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle, and the impedance-matching feature helps stabilize the ohm load going back to the amp or receiver to avoid overheating. A complete volume control kit that fits into a standard single-gang box, this kit includes the volume control, junction box, screws and assorted color trim plates (white, ivory and almond) so you can choose the color that best matches the room. Compatible with almost any dedicated audio zone or whole house system, the VSM100 provides a ruler-flat frequency response while the 12-step slider offers noise-free volume control and a wide range of listening volumes.
Specifications
- Power handling: 100W per channel
- Frequency Response 20Hz - 20kHz
- Front-mounted switch allows for easy adjustment when multiple pairs of speakers are connected to a single receiver or
- amplifier
- Impedance matching for 2, 4 or 8 pairs of speakers and can be used as non-impedance matching if leaving default on
- jumper setting at 1X.
- Steps: 12 (make before break)
- Total Attenuation: 42 dB (Max)
- Includes White, Ivory and Almond Plates, Inserts and Knobs
- Fits in a standard gang box
- Measures 4.125cm W x 6.35cm H x 6.35cm D
- 5-yr warranty
- POWER: The VMS100 is rated at 100 Watts peak, maintaining the full hi-fi audio frequency with minimal bass roll-off. Adjustable jumpers add up to eight pairs of eight ohm speakers simultaneously.
- VOLUME CONTROL: The controls allow you to adjust the volume up or down compatible with almost any dedicated audio zone or whole house sound system. It is ideal for dining rooms, saunas, and porches around the house.
- IMPEDANCE PROTECTION: This feature of VMS100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging the amplifier.
- SOUND QUALITY: Wire a 12-step linear slider for pop-free control and a wide range of listening volumes. Precision electronics provide low distortion and ruler flat frequency response in a stereo system.
- DESIGN: For dedicated audio zones, the decor plates install easily into a wall and work with almost any system. It accepts up to 14 gauge wiring and fits in a standard gang box with a 2.9” depth.
User questions & answers
| Question: | Will this match the impedance for 3 speakers |
| Answer: | It kinda fits in mine. It seems to go in the cup holder about half way. |
| Question: | Please explain if the slider itself can be ivory, along with the plate or if the slider control is one color and the plates changeable |
| Answer: | It'll work, but it's not designed for tea leaves. It will keep all the leaves on the bottom if that's what your looking for. I use it for tea as well, but it doesn't stop the tea from brewing on the bottom layer. When I get near the bottom I'll usually reuse the leaves, pulling the inner cup back up, adding more water, and it comes out fine. |
| Question: | how do I hook up 4 8 ohm speakers |
| Answer: | No, sorry. Try a natural eggwhite mask, mud masks and scrubs. Also Genefique serum from Lancome and DR. Perricone products helped a lot to correct the depth of the scars. |
| Question: | how do I order white |
| Answer: | Yes! This product minimizes the size of post acne scars. It is specifically formulated to reduce the appearance of scars and uneven texture. |
Product features
Decora Style
OSD offers rotary or slider style volume controls and multiple color options to match any home decor.
Impedance Protection
These controls allow you to match the impedance with the number of speakers being controlled with the capabilities of your amplifier
Easy to Install
Easily removable phoenix speaker wire terminals for easy and secure connections.
Standard Size
Size is a standard single gang.
100 Watts Impedance Matching In-Wall Slider Decora Style
OSD's VMS100 is an impedance-matching volume control for adjusting the volume of a pair of speakers within a whole house audio system. The VMS100 maintains the full hi-fi audio frequency response with no low frequency roll-off & high quality features.The volume control includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. This complete volume control kit fits into a standard single-gang box and includes the VC, junction box, screws & assorted color trim plates.
AV R/L Stereo Audio Switch 2(1)-in-1(2)-Out Mini Audio Switcher Passive Speaker Manual Selector Box Audio Sharing with Mute Button
BYDirect
Product description
1.The 2-way RCA Stereo Audio Switch Box works for customers have multiple audio source and outputs.
2.Input (RCA) connections: Computer / Phone / Music player. etc;Output (RCA) connections: Active speaker / Headphone / Amplifier. etc.
3.One key mute button allow you lightly press to mute the device,let you have a relaxed sense of use.
4.No External Power and other software Required.
5.High quality volume control knob; Smoothly control the volume.
6.Compact and super mini size;Easy to place and suitable for your desktop and office.
How to use:
① connect two audio sources (like CD player / computer) to 1/2 port and one audio output (like speakers) to IN/OUT port;
② connect one audio source to IN/OUT port and two audio outputs to 1/2 port.
Notice:Press up to select 1(IN/ OUT) ;Press down to select 2(IN/ OUT).
Package Contents:
1* L / R Stereo Audio Switcher
1* User manual
Notes:
1.The item is passive device,just connect it to use.
2.The device can not be able to increase the volume according to your video source input.
3.The audio cable is not included.
- 2-IN-1-OUT RCA Audio Switcher.
- Main functions: ① select audio input between 1 and 2 with 1/2 siwtcher and get one output; ② select audio output between 1 and 2 to receive one input.
- One key to mute.
- Volume control; Super small size;Passive device;Won't affect sound quality.
- Easy to install,plug and play.
Nobsound Little Bear MC1022 Mini 2(1)-in-1(2)-Out RCA Stereo Audio Switch Audio Switcher Passive Speaker Manual Selector Splitter Box Audio Sharing
- 2-IN-1-OUT RCA Audio selector designed for customers having several audio sources and outputs
- Main functions: ① select audio input between A and B with A/B siwtcher and get one output; ② select audio output between A and B to receive one input
- How to use: ① connect two audio sources (like CD player / computer) to A/B ports and one audio output (like speakers) to IN/OUT port; ② connect one audio source to IN/OUT port and two audio outputs to A/B port
- Volume control; One key to mute; Super small size; Passive device; No power needed; Won't affect sound quality
- Direct replacement or refund for defective devices. Prompt and courteous customer service.
User questions & answers
| Question: | Can i use with a bose s1 and a marshall stan more |
| Answer: | Yes. That's exactly what I do. |
| Question: | Do i need any precautions if I use this between tube amps? I dont want to damage anything |
| Answer: | First off, is it near any power supplies like power cords, those bricks consoles have, or something like that? i dont know to what extent, but that can cause interference. I would also check your connections, ensure that you are only pressing in a single button when switching inputs. I will try to think of anything else. |
| Question: | Would this allow me to connect my sonos connect to two different amps for playback in two rooms |
| Answer: | That question would have to be answered by the producer of this product, not a fellow user. This version has RCA Video and Audio L/R jacks only. Hopefully, this helps to answer your question. |
| Question: | What is the country of origin of this product |
| Answer: | There is no rf port on this switcher. Unless the tv have av input (red, white, yellow), there is no way to connect them. |
Product features
Nobsound Little Bear MC1022
Parameters:
- Interfaces: 3 * RCA jack
- Knob and key: 1 * volume knob; 1 * A/B selector; 1 * mute botton
- Dimensions (L * W * H): 82 * 55 * 20 mm / 3.23 * 2.17 * 0.79 in
- Weight: 100 g / 0.22 lb
Latest Reviews
View all
Rode Microphone For Phone
- Updated: 10.07.2023
- Read reviews
Caps With Stereo Headphones
- Updated: 13.03.2023
- Read reviews
V7 Backlit Keyboards
- Updated: 04.06.2023
- Read reviews
Knife Set With Stand Sharpeners
- Updated: 05.06.2023
- Read reviews
Wondermill Grain Mills
- Updated: 16.05.2023
- Read reviews