13 best a technology hdmi switchers

Product description

Atlona's HDVS-TX switches between two HDMI and VGA/audio inputs, digitizes, and transmits via HDBaseT. As part of a simple HDVS collection AV system, it enables projector control. Analog to Digital Atlona HDVS collection was designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with the many VGA computers still in use. The transmitter offers auto-switching between both HDMI and VGA inputs. HDBaseT and power over category cable allow signal and power to 230 feet (70 meters) over a single category cable. Combined with HDVS-RX, projector power is easily controlled from the switcher. Visit HDVS collection to see a simple low-cost system that uses both HDMI and VGA sources. Atlona Advantages Works with HDMI and VGA up to 1080p/1920x1200 Works best when used with HDVS-RX PoCc to transmitter (no power needed at HDVS transmitter) Enables projector control from HDVS-TX RS-232 input selection from 3rd party controller Easy to use software simplifies RS-232 programming Comes with under-table mounting brackets 3-way power PoCc to receiver PoCc from receiver Local power supply Suggested Receiver and Transmitters AT-HDVS-RX - Atlona HDMI HDBaseT RX Scalar Box AT-HDVS-TX-WP - Atlona HDMI and VGA/Audio to HDBaseT Wall Plate AT-HDTX-WP - Atlona HDMI to HDBaseT Transmitter Wall Plate Please note: HDBaseT performs at 230 ft. (70 m) at 1080p over CAT6a/7 and 197 ft. (60 m) at1080p over CAT5e/6. 2013 Atlona Inc. All rights reserved. "Atlona" and the Atlona logo are registered trademarks of Atlona Inc. All other brand names, trademarks, service marks, registered trademarks, and registered service marks are the property of their respective owners.

• Atlona's HDVS-TX switches between two HDMI and VGA/audio inputs, digitizes, and transmits via HDBaseT
• As part of a simple HDVS collection AV system, it enables projector control.
• Analog to Digital Atlona HDVS collection was designed to smooth the transition from analog to digital displays

Product description

HDMI 4X1 Quad Multi-Viewer

The device can converge the images input by four HDMI signal sources into the same display at the same time, and has a variety of display modes, which can be switched freely.

Used in other application scenarios such as security surveillance, video surveillance, etc., which can save space and do not need to purchase more display devices.

Parameter Description：

Video Standards: HDMI 1.3

Maximum pixel clock: 165MHz

Maximum data rate: 6.75Gbps

Maximum resolution: 1920 X1080@60Hz

Impedance: HDMI 100Ω; VGA 75Ω

The power adapter:DC 12V

Power dissipation: MAX 5W

TemperatureOperating: -5℃ ~ +70℃

HumidityOperating: 5% ~ 90%

Dimension: 153*114*25mm

The warranty: 1 year free warranty

Note:

When the resolution is ≥1920X1080@60Hz, the use length of the HDMI cable we recommend is less than 5 meters

• 【4X1 Multi-screen Viewer】 This device can converge the images input by four HDMI signal sources into the same display at the same time, and has multiple display modes, which can be switched freely.
• 【Support HDMI VGA simultaneous output】 This device can be connected to two displays, support simultaneous output of HDMI and VGA video signals, the application range is wider. Please note that due to the characteristics of the VGA interface, it can only output video but not audio.
• 【Multiple modes, seamless switching】 4 display modes, with more display arrangement options. This device can seamlessly switch between signal sources through the buttons on the panel or infrared remote control without losing or delaying the signal. Supports independent switching of audio signals and switching resolutions.
• 【HD display】Excellent video quality, support 1080P@60H and 720P@60Hz resolution output, according to different needs, different resolutions can be switched to bring you a better visual experience.
• 【Easy to use】With powerful EDID function, you can use a variety of complex application environments. Plug and play, no need to install driver, remote control, more convenient. The sturdy metal casing makes the equipment more durable....

User questions & answers

Question:	Can hdmi output cameras use this product
Answer:	Yes, it has a cord. Great drill for the price!
Question:	How long does it take to switch? How many seconds? Is there a black screen on the monitor when switching
Answer:	This model does not have a bit holder.
Question:	Audio alone switching means that the same screen can be matched with audio inputs of different signals
Answer:	I bought it, refurbish. and use it for mixing thin set and grout. had it for 4 years and works great.
Question:	Can the product switch seamlessly
Answer:	All I could say it mixes good ,and u push it turns on let go it turns off no lock it's good

Product description

More and more HDR devices but not enough ports on TV? This 5x1 HDMI switch is designed to expand your HDMI port quantity to 5 plus.



Simply plug your PS4 Pro, Xbox One S/X, UHD Blu-ray player and all other HDR devices into the inputs, and the output connection to your TV or projector. You are ready to enjoy a wonderful game/film time with it. No plugging and unplugging anymore, no mess around with the cords anymore!



HDMI Resolution: 24/50/60fs/2160P/1080P/1080i/720p/576p/576i/480P/480i

Deep Color: 24/30/36bit/1080P/1080i/720p/576p/576i/480P/480i, 24bit/2160P

Audio Format: DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3

Max Transfer Rate:18GBPS

Max Bandwidth: 600MHz

Support Cable Length: up to 16ft 26AWG standard 4K HDMI cable in both Input and Output

• Add More HDMI 4K ports to your TV: This 4K HDMI Switch allows up to 5 UHD source devices (like PS4 Pro, Xbox One S/X, UHD Blu-ray player, Apple TV 4K, Roku Ultra, New Fire TV) connecting to a single UHD TV/display/projector, and easily switch between them
• Full HDR without Degradation: The 5 port HDMI Switch supports 4096×2160 up to 60fps with 8bit YCbCr 4:4:4, 10bit YCbCr 4:2:2, 12bit YCbCr 4:2:0; supports HDR10, Dolby Vision and Dolby Atmos
• Auto and Manual Switch: Support auto switch, manual switch by IR remote or pressing the button on box; auto switch function can also be turned off
• Premium quality: Support up to 16ft 26AWG standard HDMI cable in 4K@60Hz; made by durable metal enclosure for quick heat dissipation and excellent longevity
• Packing and Warranty: 1x HDMI 2.0 switch, power adapter with 100-240V input, IR remote, user manual; 1 year hassle-free warranty

User questions & answers

Question:	Does this support ARC
Answer:	Yes, he can match different audios under different screens, or select the sound you want when multiple images are brought together.
Question:	Does it support arc
Answer:	Yes, yes, the switching response speed is very fast, and the screen switching is smooth enough. But when switching resolutions, there will be a short pause, about 1 second.
Question:	Dolby Vision support
Answer:	No there is no lock on the trigger
Question:	Does it actually support hdmi-cec
Answer:	Sadly, from a place with little if any quality control and a history of pre-mature equipment failure--China. The drill was advertised as Made in USA. Not pleased.

• * Support HDMI 1.4
• * Support 3.0Gbps per channel bandwidth
• * Video resolutions up to 4k x 2k @30Hz ,1080p@120Hz and 1080p 3D @60Hz
• * PIP (Picture in Picture) mode support highest video resolution 1080p 3D@60Hz
• * Multifunctional on switching : intelligent or mechanical

User questions & answers

Question:	pip can u change location and size
Answer:	It does but I am using mine with the Harmony hub+ remote so it knows it's assigned port and doesn't switch unless you change it manually/ with the remote .
Question:	Am i able to use this to split a screen perfectly in half from 2 hdmi sources using the pip feature
Answer:	Yes, it can be used.
Question:	Does the 3D function work for a non 3d tv connected to this and a ps3 with the ps3 3D glasses
Answer:	The switching response is very fast, I think there is no delay, and there is no black screen when switching.

Product features

Portta HDMI 4x1 Switcher with PIP (Picture in Picture) and IR Remote

The 4x1 HDMI Switcher routes high definition video (in multiple resolutions up to 4k x 2k) and digital audio from any one of the four sources to display unit, Support PIP (Picture in Picture).

Four inputs accommodate the simultaneous connection of up to four high definition video sources, such as satellite systems and HD DVD players.

The output sends the high definition audio/video signals to a high definition display. This kind of the HDMI Amplifier Switcher not only has the key-press-switching function, but also has the IR remote control and intelligent function.

HDMI Switch with PIP (Picture In Picture)

• Input DDC Signal:5 volts p-p (TTL)
• Maximum Single Link Range:4K@30Hz
• Output Video:HDMI Signal
• Vertical Frequency Range: 30/50/60/120Hz
• Video Amplifier Bandwidth: 3.0Gbps/300MHz
• Interlaced(50&60Hz):480i,576i,1080i
• Progressive(50&60Hz):480p,576p,720p,1080p,4K@30Hz

Package Content

1） Main Unit x1

2） Remote Control x1

3） IR Extender Receiver x1

4） Power Adapter x1

5） User Manual(English Version) x1

• NEWEST 2.0 VERSION 5 PORTS HDMI SWITCHES - HDMI Switch 4k supports connect up to 4 UHD HDMI sources and easily switches between 5 sources on a single display. HDMI selector can support 3-way switch: Auto switch, Manual switch and remote control switch between the 5 HDMI sources
• HIGH RESOLUTION - HDMI switch box supports up to Ultra HD 4k@60hz resolution, compatible with all lower resolution: 4k@30hz, Full HD 1080P, 720P and more. HDMI hub V2.0 can support HDR, 3D, HDCP 2.2 pass-through, hdr switch can also compliance with all lower HDMI Version: V1.4,V1.3,V1.2,V1.1 and V1.0
• HIGH QUALITY- Ultra HD gold plated 24K HDMI Connector with fast signal transmission, oxidation resistance, resist corrosion and reduce tarnish, increase of service life. Aluminum Frame, Elegant Piano Paint Surface.
• WIDE APPLICABILITY & COMPATIBILITY - HDMI switch with remote can support most devices with HDMI interfaces, such as PCs, laptops, TV box, Nintendo Switch, Blu-ray, PS3, PS4, Xbox, HD-DVD, PC, Fire TV, Fire TV stick, Roku, etc.
• EASY INSTALLATION - Univivi HDMI switcher is easy to install and operate – Plug & Play. Feel free contact us if you have any questions or suggestions.

User questions & answers

Question:	I want to use this for multi camera use (3 hdmi cameras) and upload to my computer as 1 video, is this product Capable of such
Answer:	I think this item has nothing to do with a bigger issue here... AFAIK sony PS3 3D glasses works with shutter technology, in paper it sounds like you would be able to use ur PS3 to watch 3D in your non 3DTV...BUT, there is a sync matter that got me worried, google it to find out more. About this item, I think you wont have any problem IF everything else works.
Question:	Will this version 2.0 work with a 2017 Macbook Pro? I have the previous version of this switch and it never detects the display if using the switch
Answer:	No, it doesn't. This one supports ARC and has dedicated audio output: https://www.amazon.com/dp/B01K7BZ1XC, but it supports up to 4K@30Hz, not 60Hz.
Question:	Why does it have a power adapter? it appears to work off the power of the hdmi cable
Answer:	You may take a look at this one: https://www.amazon.com/dp/B07C1WQ7R2. It can support ARC TV, split audio from HDMI and output audio via optical surround sound to your sound system. If you have any further questions, please let me know some details of your setup and I will further check it. Thank you!
Question:	Did cable work with ps4 or xbox x console,support hdr and 4k
Answer:	Yes, it supports Dolby Vision.

Product features

Specification:

• Supports HDCP and 5 HDMI inputs / 1 HDMI output.
• Support Remote control and HDMI auto switch.
• Support 4K@60Hz UHD signal input and output.
• Support Blue-Ray 24/ 50/ 60fs/ HD- DVD/ xvYCC
• Support high-definition signal with remote control.
• Support automatically jumps to the newly inserted HDMI source.
• Supports 3D devices and automatic identification of the signal source.
• Supports 12-bit Deep color per channel; maximum of 36-bits across all channels
• Supports audio formats such as DTS-HD, Dolby TrueHD, LPCM7.1, PCM, DTS, Dolby Digital AC3, DSD
• Support 1080P input up to 26ft AWG26 HDMI standard cable length, output up to 26ft AWG26 cable length.

Note:

please use the machine as the instruction listed to keep the long use lifetime of the machine.

* The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.

* All parts will be free from the strong shake, hit, fall.

* Touching the power adaptor with the wet hands is prohibited.

* Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.

* Pls turn the power off when the machine is not used for long time.

* Pls do not open the cover and do not touch the inside parts.

* Pls use the original factory power adaptor.

* It does not support the conversion between DVI and HDMI signal Pls use your signal source and display following the correct process.

• The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Product description

1.0 Introduction

I. Smart Function Introduction

* Sense the input source ports automatically, and bypass the port without signal loss.

* Switch to the last plugged input source port automatically when hot plug.

* Remember the active input source port while pressing “MEMORY” on the remote control, and select this input source port automatically when restart.

II. Remote Control Introduction

* Pressing the number to select the input source accordingly.

* Pressing “ ”or “ ”to select the previous or next input source.

* Pressing “MEMORY” to get the switch remember the active input source, and select this input source port automatically when restart.

III. LED Indication

* Red LED indicates “Signal Not Selected”.

* Blue LED indicates “Active Signal Path”.

* No LED indicates “No Input Signal”.

2.0 Specification

*Input DDC Signal:5 volts p-p (TTL)

*Input TMDS Signal:0.5-1.0 volts p-p

*Maximum Single Link Range:4KX2K/30Hz

*Product Size: 117mm x 64mm x 25mm

*Vertical Frequency Range: 50/60Hz

*Video Amplifier Bandwidth: 3.0Gbps/300MHz

*Interlaced(50&60Hz):480i,576i,1080i

*Progressive(50&60Hz):480p,576p,720p,1080p,4KX2K/30Hz

*Operating Temperature:0 ℃ to +85℃

*Operating Humidity:10% to 85 % RH (no condensation)

*Storage Temperature: -10℃ to +80℃

*Storage Humidity: 5% to 90 % RH (no condensation)

*Extend Power Supply: 5V DC

*Power Consumption (Max):5W

3.0 Package Content

1）Main unit x1

2）Remote control x1

3) 5V DC Power adapterx1

4）User Manual(English Version) x1

5）Warranty Card x1 (5Years Worry-free Warranty)

• Multifunctional on switching : intelligent or mechanical IR extender receiver (included) IR remote (included) Power adapter (included)
• Support HDMI1.4b, HDCP pass-through. Support highest video resolution 4k x 2k at30 1080p and 3D. Support 300MHz/3.0Gbps per channel bandwidth
• Support 12bit per channel deep color,36 bit Total. Support uncompressed audio such as LPCM (Linear Pulse Code Modulation).
• Support compressed audio such as DTS Digital, Dolby Digital （including DTS-HD and Dolby True HD）.

User questions & answers

Question:	Is this bidirectional, e.g. can you have one input that switches to two outputs
Answer:	It requires power to swith
Question:	What can I buy where all will play 3 monitors at once
Answer:	Yes. Both my consoles work. Even on a 5k tv. 60hz is not a problem
Question:	will all the of them work at one time. I want to hook 3 monitors to it and want them on all at once
Answer:	It appears not.By Andrew P. Woods "The Mario Master" on March 24, 2014 "This means that without the remote (which can fit in the palm of my hand!), YOU CAN'T USE THE PIP FEATURE! But the remote itself is not much better, and all the buttons do is switch inputs, or show/hide the pip windows. So how do I make the pip windows cover the left third of the screen as pictured in the manual? I don't know. ... Update: It seems the PIP windows constantly studder, freezing seemingly every other second. Either this product is beyond awful, or I received a defective one."
Question:	Is it possible to plug one device to two screens with this device ? One Input and 2 output
Answer:	Definetely no, pip depends on your tvand meeds 2 sources. This device will let you choose between 4 hdmi sources while only having 1 hdmi cable attached to the tv. Only 1 hdmi sgnal will go through the device at once.

• 2x8 HDMI Switcher Splitter can connect two HD signal sources with two HD display terminals, it allows two HDMI signals to be split or switched to two HDMI compatible monitors or projectors.
• HDMI cable connects with HDMI output , the 2x8 splitter can amplify the HDMI singal; supporting highest video resolution 1080p/60 Hz, HDMI1.4a, 3D, 4KX2K
• Compatible with fully HDMI 1.3/1.4 Specification compliant. buffer HDMI signals at the same time, HDMI or DVI to HDMI cables used for inputs and outputs.
• Included IR remote adapter for operational flexibility and easy control, no manual clicking the select button needed
• Support single high definition display and multiple output HD signal sources, such as DVD Players, A/V receiversand Set Top Boxes, 360 Sky Box Freesat Virgin Bluray Player DVD HDTV Projector Camcorder HTPC Laptop

User questions & answers

Question:	Does input from a computer send audio and video through the switcher? I need both audio and video sent to the TVs
Answer:	No. It will only display one input at a time
Question:	If I input two laptops and output to 3 1080 monitors and 1 4k TV, will this only display the same image on every monitor
Answer:	You can but only one output works at a time so only the active port will display on whichever screen it's connected to. In other words, it does not act as a simultaneous multi-screen splitter.
Question:	Does this product utilize both inputs at the same time? (for example, can I use input 1 for monitors 1,3,4, and 7, while using input 2 for the rest
Answer:	yes the remote will only switch to camera inputs that are powered on.
Question:	Does this support dolby vision
Answer:	I no longer own or use this item.

Product description

This 2x1 VGA + HDMI to HDMI switch lets you connect an HDMI and a VGA audio/video source to an HDMI display, monitor or projector. It delivers uncompressed HD video, with support for resolutions up to 1920x1200 or 1080p. One Switch for VGA and HDMI This multi input HDMI selector switch has a 2 in, 1 out configuration, and features built-in VGA conversion, enabling you to connect an HDMI and a VGA video source to the same HDMI display without the use of additional adapters or scalers. By enabling users to connect two computers to one monitor, it also eliminates the need for a KVM switch. The switch also provides audio support - 7.1 surround sound for HDMI and 2-channel 3.5mm stereo for VGA. Ease of Use This video switch box ensures hassle-free operation with two different auto switching modes: automatic switching that detects and selects a newly connected device, as well as priority selection which lets you choose which port should be activated by default for automatic switching. The multi input switch also features LED indicators to let users know what ports are connected. Multi Use Functionality This switcher has been designed with the boardroom and classroom in mind - it features VGA and HDMI inputs to support a wide range of devices. Plus, automatic switching encourages on-the-fly collaboration, by making it easy to share your projector between multiple devices. This HDMI video switch box is backed by a StarTech.com 2-year warranty, and free lifetime technical support.

• 2 IN, 1 OUT CONFIGURATION: This multi input HDMI switch enables you to share an HDMI display, monitor or projector between a VGA and HDMI equipped audio / video source like a laptop, desktop computer or Blu-ray player, etc
• CUT COSTS & CLUTTER: Accommodating both VGA and HDMI inputs in a single switch, this 2x1 HDMI switcher box saves the hassle and expense of buying multiple video adapters The ability to connect multiple computers to one monitor also helps eliminate cable clutter
• HIGH-DEFINITION VIDEO: With support for resolutions up to 1920x1200 or 1080p, this dual input HDMI selector switch ensures you won’t have to compromise quality, making it ideal for digital signage, professional presentations and home theater applications
• EFFORTLESS CONTROL: With automatic and priority switch options, users will enjoy a hassle-free experience; the VGA + HDMI to HDMI switch automatically detects newly connected devices, or lets users choose a priority port for ultimate convenience
• INDUSTRY-LEADING SUPPORT: StarTechcom offers a 2-year warranty and free lifetime technical support on this 2x1 HDMI video switch box, and has been the choice of IT professionals and businesses for over 30 years

User questions & answers

Question:	Can it be attached to a cart somehow
Answer:	This is the reverse. You can have 3 input devices, and switch between them, but it outputs to a single monitor. What you need is a 1 to 3 or 1 to 4 hdmi splitter.

Product features

One Switch for VGA and HDMI

The A/V switch features built-in VGA conversion, enabling you to connect an HDMI and a VGA video source to the same HDMI display without the use of additional adapters or scalers.

Effortless Control

Ensures hassle-free operation with two different auto switching modes: automatic switching that detects and selects a newly connected device, as well as priority selection which lets you choose which port should be activated by default for automatic switching.

Focus on the Presentation, Not Boardroom Connections

This A/V switch has been designed with the boardroom and>features VGA and HDMI inputs to support a wide range of devices, and the built-in converter makes it easy to connect to the room’s display without the use of additional adapters.

Automatic switching encourages on-the-fly collaboration among students or co-workers, by making it easy to share your projector between multiple source devices.

• 5x1 HDMI Switch with Premium Chipset Support bandwidth 18Gps/600MHZ, HDCP 2.2, 4K 60HZ 4:4:4, FullHD, UHD, CEC, DeepColor to 36bit
• Compatible with BT.2020, HEVC H.265 Codec | Supports all popular HDMI resolutions up to 1080p 60Hz / 4K 60Hz ULTRA HD, UHD 4Kx2K | 3840 x 2160
• Compatible with all kinds of HDR formats, e.g. Samsung SUHD HDR + HDR-1000, LG Super Ultra HD HDR 10, Sony 4K HDR Extended Dynamic Range Pro, Panasonic 4K Pro UHD and more
• Supports all common audio formats. Dolby Atmos, DTS: X, LPCM 7.1, DTHD, DD +, Dolby True HD, etc. Several devices can be connected in series (cascadable). Compatible up to YCbCr 4K / 24 4: 2: 2 12bit, 4K / 24 4: 4: 4/4: 2: 2 12bit, RGB 4K / 24 12 bit
• 90 days money back with any quality issues. Life-time warranty.

User questions & answers

Question:	Will my audio work If I'm using this on my ps4, switch, and computer if I have my speakers plugged into my monitor or computer
Answer:	Yes, you can select either input 1 or input 2. All outputs would display the same content of the input that you select.
Question:	Will it pass through 1080 and 1440 @ 120hz
Answer:	You cannot use both at same time. Only one input can be selected at a time.
Question:	I see it.s compatible with chromecast does it work with roku
Answer:	I’m pretty sure it does. It doesn’t state Dolby vision specifically however it supports all Dolby audio and all video output up to 4K. I am running retro gaming to new video outputs and it supports everything.
Question:	Does this support 10 bit color
Answer:	Dear Customer, Thnaks for your inquiry. It is a 2 ports Switcher,it only converts from 2 inputs to 1 output . Thanks

Product features

Features:

• HEVC H.265, FullHD, UltraHD, HDR, CEC, Deep Color up to 36bit;
• Compatible with lower HDMI versions;
• All common VESA / HDMI resolutions up to 4K 60Hz
  - Audio formats: Dolby Atmos, DTS: X, LPCM 7.1, DTHD, DD +, Dolby True HD, etc. ;
• Compatible with all kinds of HDR devices, such as Samsung SUHD HDR + HDR-1000, LG Super Ultra HD HDR 10, Sony 4K HDR Etended Dynamic Range Pro, Panasonic 4K Pro UHD, etc.;
• HDR BT.2020 compatible up to YCbCr 4K / 24 4: 2: 2 12bit, 4K / 24 4: 4: 4/4: 2: 2 12bit, RGB 4K / 24 12 bit;
• SDR BT.709 compatible up to YCbCr 4K / 30 4: 4: 4 12bit, 4K / 30/60 4: 4: 4 8bit, 4K / 60 4: 2: 2 12bit; RGB 4K / 30/60 8bit;
• Integrated signal amplification and signal processing;
• Possible cable lengths output approx. 25m at 1080p and approx. 10m at 4K / 60Hz HDR by AWG 24 HDMI cable;
• Possible cable lengths Input approx. 20m at 1080p / approx. 5m at 4K / 60Hz HDR by AWG 24 HDMI cable;
• Switch by the button on the product or by IR remote control;
• High quality power supply DC 5V1A, AC 100-240V;
• Size: 6.26"x2.52"x0.87";
• Weight: 0.542lbs

4K 60HZ 4:4:4 8 bit HDR

Compatible up to 4K/ 60HZ YCbCr and RGB 4:4:4 8bit, YCbCr 4K/24HZ 4: 2: 2 12bit, 4K@24HZ 4: 4: 4 12bit, RGB 4K / 24HZ 12 bit; YCbCr 4K/30HZ 4: 4: 4 12bit, 4K / 30HZ 4:4:4 8bit, 4K / 60HZ 4: 2: 2 12bit; RGB 4K / 30HZ 8bit

HDR is supported

HDR is pass through by this HDMI switch. HDR expands the range of both contrast and color significantly. Bright parts of the image can get much brighter, so the image seems to have more "depth."

Physical ESD protection

Physical ESD (Electro-Static Discharge) protection is added to XOLORspace HDMI switch to protect it to be damaged by electricity static discharge. Ensure durability and reliability.

Premium chip is applied

Premium chip supports Max bandwidth 18Gbps and 600MHZ, and is fully compliant with HDCP 2.2. 18Gbps and 600MHZ are the two main points to choose a good 4K 60HZ HDMI switch that work perfectly with PS 4 pro, XBOX ONE S at 4K 60HZ 4:4:4 8bit HDR.

Product description

The 2 port HDMI switch has 2 HDMI inputs to 1 output and lets you share a display or projector with four HDMI-enabled audio / video source devices. The switcher features 2 independent inputs that each support 4K resolution and 7.1 surround sound audio. The 2 port switch box also features MHL support on HDMI input port 1, enabling video output video from MHL-enabled mobile devices such as Samsung Galaxy tablets and smartphones. 4K is supported by the latest A/V devices and delivers four times the resolution of 1080p. Plus, because the switch is backward compatible with high-definition 1080p, you can rest assured any video source will look great in your digital signage application. Constructed of solid aluminum, the 2x1 HDMI switch is durable and heavy enough to prevent the unit from lifting or sliding around if the attached HDMI cables are bumped or shifted. Plus, its small footprint makes it easy to integrate the switch into any boardroom, classroom, home theater, or digital signage application. This HDMI selector switch ensures effortless operation with automatic switching that detects and selects a newly connected device. Automatic switching encourages on-the-fly collaboration among colleagues, by making it easy to share your projector between multiple source devices in a boardroom or classroom environment. The 4K HDMI switch also supports manual operation using the included IR remote control, or the built-in front panel toggle switch directly on the device. The switch also saves time during setup with EDID emulation ensuring all of your native settings such as resolution and refresh rate are communicated between your display and video source devices. EDID emulation maximizes compatibility with your 4K display, ensuring a convenient plug-and-play installation. The 2 port HDMI switch is backed by a 2-year StarTech.com warranty and free lifetime technical support.

• 2 INPUT 1 OUTPUT FUNCTIONALITY: Switch between 2 HDMI sources on a single HDMI display, with support for MHL and video resolutions up to 4K.
• EASY OPERATION: This 2 port HDMI switch has automatic switching to ensure effortless operation. With EDID emulation, you can maximize compatibility with your display and enjoy a plug-and-play setup.
• ASTONISHING PICTURE QUALITY: Enjoy impressive image quality with support for UHD 4K @ 30Hz. For ultimate compatibility, the 2x1 video switcher is also backward compatible with HD 1080p.
• IR REMOTE CONTROL: This HDMI switch box features an IR remote control, letting you manually select your source remotely.
• THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime technical support on this HDMI switch, and has been the choice of IT professionals and businesses for over 30 years.

User questions & answers

Question:	Is this rack-mountable
Answer:	Hello, this HDMI switch supports 4K 60HZ YCbCr 4:4:4 8 bit HDR and 4K 60HZ 4: 2: 2 12bit
Question:	In automatic switching, if ports a and b are turned on and port b is being displayed, if b is turned off, will the display change to port a by itself
Answer:	Yes - Double stick tape or industrial strength velcro.
Question:	Switches as soon as a second source is switched on (as in powered on) , or as soon as the signal becomes more than blank? Volt or vid signal trigger
Answer:	Yes. HDMI sends both audio and video.

Product features

Astonishing Picture Quality with 4K Support

You’ll be amazed at how this video switch maintains Ultra HD picture quality. 4K is supported by the latest A/V devices and delivers four times the resolution of 1080p. Plus, because the switch is backward compatible with high-definition 1080p, you can rest assured any video source will look great in your digital signage application.

Solid Aluminum Housing Ensures Fixed Positioning

Constructed of solid aluminum, the HDMI switch is durable and heavy enough to prevent the unit from lifting or sliding around if the attached HDMI cables are bumped or shifted. Plus, its small footprint makes it easy to integrate the switch into any boardroom, classroom, home theater, or digital signage application.

Hassle-free Operation with Auto Switching & EDID

This switch ensures effortless operation with automatic switching that detects and selects a newly connected device. Automatic switching encourages on-the-fly collaboration among colleagues, by making it easy to share your projector between multiple source devices in a boardroom or classroom environment. The VS221HD4K also supports manual operation using the included IR remote control, or the built-in front panel toggle switch directly on the device.

The switch also saves time during setup with EDID emulation ensuring all of your native settings such as resolution and refresh rate are communicated between your display and video source devices. EDID emulation maximizes compatibility with your 4K display, ensuring a convenient plug-and-play installation.

Applications

-Share a 4K television or projector with two different 4K video sources

-Collaborate with colleagues by connecting multiple users to the same display, and switch between input devices

-Use in digital signage applications to display multiple source devices at different times

-Use in your home theater to connect four A/V devices to your television, such as Blu-ray players, cable / satellite set-top boxes, and computers

StarTech Packaging

Look for StarTech Branded Packaging to ensure you are getting a genuine StarTech product.

What's in the Box

1 - 2-Port 4K HDMI Switch

1 - IR cable

1 - Remote Control

1 - Universal Power Adapter (NA / UK / EU)

Product description

The 4 port HDMI switch has 4 HDMI inputs to 1 output and lets you share a display or projector with four HDMI-enabled audio / video source devices. The switcher features 4 independent inputs that each support 4K resolution and 7. 1 surround sound audio. The 4 in 1 out switch box also features MHL support on HDMI input port 1, enabling video output video from MHL-enabled mobile devices such as Samsung Galaxy tablets and smartphones. 4K is supported by the latest A/V devices and delivers four times the resolution of 1080p. Plus, because the switch is backward compatible with high-definition 1080p, you can rest assured any video source will look great in your digital signage application. Constructed of solid aluminum, the 4x1 HDMI switch is durable and heavy enough to prevent the unit from lifting or sliding around if the attached HDMI cables are bumped or shifted. Plus, its small footprint makes it easy to integrate the switch into any boardroom, classroom, home theater, or digital signage application. This 4K HDMI multiviewer ensures effortless operation with automatic switching that detects and selects a newly connected device. Auto sensing / switching encourages on-the-fly collaboration among colleagues, by making it easy to share your projector between multiple source devices in a boardroom or classroom environment. The 4K HDMI switch also supports manual operation using the included IR remote control, or the built-in front panel toggle switch directly on the device. The selector switch also saves time during setup with EDID emulation ensuring all of your native settings such as resolution and refresh rate are communicated between your display and video source devices. EDID emulation maximizes compatibility with your 4K display, ensuring a convenient plug-and-play installation. The 4 port HDMI switch is backed by a 2-year StarTech and free lifetime technical support.

• HDMI SPLITTER 4 IN 1 OUT: Switch between four HDMI sources on a single HDMI display, with support for MHL and video resolutions up to 4K.
• EASY OPERATION: This 4 port HDMI switch has auto sensing / switching to ensure effortless operation. With EDID emulation, you can maximize compatibility with your display and enjoy a plug-and-play setup.
• ASTONISHING PICTURE QUALITY: Enjoy impressive image quality with support for UHD 4K @ 30Hz. For ultimate compatibility, the 4x1 video switcher is also backward compatible with HD 1080p.
• IR REMOTE CONTROL: This HDMI switch box features an IR remote control, letting you manually select your source remotely.
• THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime technical support on this HDMI switch, and has been the choice of IT professionals and businesses for over 30 years.

User questions & answers

Question:

will this switch between inputs on my tv without the use of its own remote? (say i use my tv remote to switch the inputs

Answer:

I don't see why it wouldn't be. I haven't had a chance to write my review for this thing, but it does exactly what it says it does. 4k HDR 4:4:4 with zero issues whatsoever. This thing was exactly what I was looking for. I am planning to write a review soon. I saw a review where a person stated that they were having issues, my advice would be to check each cable and make sure they are both working, and are true high speed HDMI cables. The Amazon basic cables are what I use and everything works great. Now I do not use a 20ft HDMI cable anytwhere in my setup, so I think this could also be an issue for some people. There are however cables that will work, but you have to get the right ones. I use 6.6ft cables in my setup, but am getting ready to change them to shorter cables to reduce clutter.

Product features

Astonishing Picture Quality with 4K Support

You’ll be amazed at how this video switch maintains Ultra HD picture quality. 4K is supported by the latest A/V devices and delivers four times the resolution of 1080p. Plus, because the switch is backward compatible with high-definition 1080p, you can rest assured any video source will look great in your digital signage application.

Solid Aluminum Housing Ensures Fixed Positioning

Constructed of solid aluminum, the HDMI switch is durable and heavy enough to prevent the unit from lifting or sliding around if the attached HDMI cables are bumped or shifted. Plus, its small footprint makes it easy to integrate the switch into any boardroom, classroom, home theater, or digital signage application.

Hassle-free Operation with Auto Switching and EDID

This switch ensures effortless operation with automatic switching that detects and selects a newly connected device. Automatic switching encourages on-the-fly collaboration among colleagues, by making it easy to share your projector between multiple source devices in a boardroom or classroom environment. The VS421HD4K also supports manual operation using the included IR remote control, or the built-in front panel toggle switch directly on the device.

Applications

Share 4K television or projector with four different 4K video sources.

Collaborate on the fly with colleagues, by connecting multiple users to the same display and switch between input devices.

Use in digital signage applications to display multiple source devices at different times.

Use in your home theater to connect four AV devices to your television, such as Blu-ray players, cable / satellite set top boxes, and computers.

StarTech Packaging

Look for StarTech Branded Packaging to ensure you are getting a genuine StarTech product.

What's in the Box

1 - 4-Port 4K HDMI Switch

1 - IR cable

1 - Remote Control

1 - Universal Power Adapter (NA / UK / EU)

Product description

Specifications

1. 2 ways HDMI switch with HDMI cable

2. 3D supported, support full 1080p

feature

1.Connects two HDMI devices to one HDMI display.

3.Gold plated connectors , No loss of quality.

support HDCP 1.2

Support deep color 12bit

Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC

Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Support input HDMI 1.3b

Inputs can be switched by the buttons.

it can come back to the default the input 1 status when restarted or reset.

Installs in minutes after connect the

Specification:

- Product Type: HDMI 2x1 Switch

- Interface Type: 2 HDMI in,1 HDMI out

- - Product Type: HDMI 2x1 Switch

- Interface Type: 2 HDMI in,1 HDMI out

- Color: Black

- Dimension: 0.2 X 0.07 X 0.2 inches

- Weight: 0.6pounds

Package included:

- HDMI 2x1 Switch x 1

- User Manual x 1

note:After you receive our products, if you feel satisfied with us, please give us a customer review as an encouragement, if not, please contact us and we will serve you until you are satisfied

• A-tech hdmi selector Intelligent Function: has the key-press-switching function.Automatic search the new input signal.
• The hdmi switcher 4k allows you connects three HDMI devices to one HDMI display.Gold plated connectors. No loss of quality
• This hdmi splitter switch support full 3D&1080p and with 3 ft hdmi pigtail cable
• HDMI cable (pigtail) switch - Plug and Play.This Hdmi Switch Switcher Support 3d-1080p,hdmi1.3v -Hdcp 1.2. You Can Connect 2 Different Input Source to One Display Such As connect Dvd, Camera, Cellphone,sky-stb,xbox360 roku to one tv /projectorAt the Same Time with This Hdmi Switcher
• Money-back satisfaction guaranteenote:After you receive our products, if you feel satisfied with us, please give us a customer review as an encouragement, if not, please contact us and we will serve you until you are satisfied

User questions & answers

Question:	Has anyone got this to automatic switch when used with a roku 3? I assume it wont auto switch with a roku since the roku never technically turns off
Answer:	wooks great
Question:	I have two monitors and only one hdmi port on my desktop. can i use this to have a two monitor setup
Answer:	Suggest you go to your Cpap product Manuel and look up the adapter for your machine. Or do a search on what adapter power supply your make and model uses.
Question:	Can I use with DirectTV and Roku 3 device
Answer:	Yes, I am able to use this product
Question:	I want to connect both my Comcast and Fire TV to my TV. Seems this would work. Can you confirm
Answer:	Not sure. I have remstar plus by respironics and it works great. I use with my flashfish power bank and is awesome. My normal plug is 100-240v~50/60Hz,2.1A. I hope this helps.

Product description

J-Tech Digital ® is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. J-Tech Digital has played a major role in transforming whole-house audio, video and home theater.

For ease of setup and management, the matrix includes a GUI-based software for HDCP/EDID reporting, system configuration, and device status. The matrix is control system-friendly and integrates with any RS-232, or IR-based control system. Flexible control capability is also provided by the supplied IR remote and front panel controls. This matrix  is ideal for professional HDMI signal routing in residential and commercial applications were a number of AV sources must be shared throughout four zones to reduce the installed equipment footprint and to reduce the costs associated with multiple, redundant devices.

 

*NOTE: This device has a FREE Control4 Driver Available. Contact us for more information!

Features:

4K@30Hz

Four HDMI inputs and four HDMI outputs

Supports Audio Return Channel, CEC function

Supports digital audio format: HBR, LPCM7.1, AC3, DTS and DSD audio

Supports 3D Video

HDMI 1.4 compatible audio interface

HDCP 1.2/1.4 compliant 

Supports deep color 30 bit and 36 bit

Supports resolution up to 1080P

Supports IR or RS232 remote control 

Package Includes:

1 x HDMI Matrix

1 x AC Adapter

1 x RS232 Cable

1 x Remote

1 x User Manual

• 4 INPUTS AND 4 OUTPUTS: Distribute any source to any display, the four output signals can be different or the same. GREAT HDMI DISTRIBUTION PRODUCT for you Blu-Ray Players, satellite receivers & game consoles.
• 4K SUPPORT: 4K@30Hz, 1080P@60/50Hz, 1080I@60/50Hz, @720P@60/50Hz, 576P@60/50Hz, 576I@50Hz, 480P@60Hz, 480I@60Hz
• WIDE DIGITAL AUDIO COMPATIBILITY: supports HD Digital Audio formats, including the following: LPCM, DSD, DST, DTS and HBR.
• REMOTE CONTROL FUNCTION: control the matrix switcher through RS232 or IR remote.
• OPTIMAL SIGNAL TRANSMISSION: The units contain in-built automatic equalisation and amplification to ensure optimum signal transmission without loss in video/audio quality. HDCP 1.4 Compliant.

User questions & answers

Question:	Can I run an Xbox on two screens while I have a cable box run on the other two screens simultaneously
Answer:	The disadvantages to having a non-powered splitter or receiver have mostly to do with signal strength and length of cable. If you're only going to go 3-6 feet one without power should be fine. I use mine with a 50 ft cable and the powered unit I bought works great for my needs. I have yet to try it out with 4k though, just 1080p so far.
Question:	How does this matrix do remote control over ethernet when it does do have an input for that
Answer:	I had issues with another hdmi switch. Connect XBO, PS4, PC to my monitor. The first switch I got worked fine for XBO and PC. PS4 worked but it was a weak video signal, it didn't seem to have full color, and had what looked like dead pixels all over the screen moving all over the place. I found the issue with the switch was that it didn't have its own power supply, it was powered by the HDMI, and PS4 doesn't seem to send enough power through it for a full signal. I bought a different switch that had its own power supply, and everything was fine. I suspect you may have issues with this one because it doesn't appear to have its own power supply.
Question:	Is it 220volt power compatible
Answer:	Not sure about roku 4 but it works with my roku 3 and PS 4 that's what i use mine for. it's a surprisingly good piece of equiptment I think that as long as long as it works with the 3, it will work with the 4.
Question:	If input a is at a 4k resolution and output to both output a with a 1080 screen and output b with a 4k screen, would output b still be 4k resolution
Answer:	I believe that it is a hdcp 2.0. I have a blueray, wiiu, and direct tv box connected to it and have had no trouble after I replaced 2 bad cables.