13 best emb crossovers
EMB crossovers, particularly in the context of audio systems and electronics, typically refer to the crossover components produced by EMB. A crossover is a crucial element in audio systems, especially in multi-driver speaker setups. It divides the audio signal into different frequency ranges and directs them to the appropriate drivers (such as woofers, tweeters, and midrange speakers). This ensures that each speaker reproduces the frequencies it is designed to handle, resulting in a more accurate and balanced sound.
EMB is a company that specializes in audio and video accessories, including crossover parts. These components are essential for fine-tuning and optimizing the performance of speakers. Crossovers can be passive or active, and they play a vital role in achieving high-quality audio reproduction.
Some key points about EMB crossovers and related audio accessories may include:
Passive vs. Active Crossovers: Passive crossovers are commonly used in speaker systems and are placed between the amplifier and the speakers.Active crossovers, on the other hand, are placed before the amplifier and require external power. EMB may offer both types, catering to different audio system setups.
Frequency Divisions: Crossovers from EMB likely cover a range of frequency divisions to accommodate various speaker configurations. Different speakers are optimized for specific frequency ranges, and crossovers help ensure that each speaker receives the appropriate frequencies.
Crossover Points: The crossover point is the frequency at which the signal is split between different drivers. EMB crossovers may provide adjustable crossover points, allowing users to customize the audio response based on their preferences and the characteristics of their speakers.
Build Quality and Components: EMB is likely to focus on providing high-quality components in their crossovers. This could include quality capacitors, inductors, and resistors to minimize signal distortion and ensure a clean audio signal.
Compatibility: EMB crossovers are designed to be compatible with a variety of speaker systems. Users should ensure that the crossover specifications match the requirements of their speakers for optimal performance.
When considering EMB crossovers or any audio accessories, it's essential to understand the specific needs of your audio system and the compatibility of the components with your speakers and amplifier. Additionally, consulting the product documentation and user reviews can provide insights into the performance and reliability of EMB crossover parts.
Below you can find our editor's choice of the best emb crossovers on the market
EMB PRO 3 WAY CROSSOVER + SUB WOOFER Control EBX79
Product description
3 Way Crossover Sub Woofer Control Rack Mount 110V/220V
- 3 Way Crossover
- Sub Woofer Control
- Rack Mount
- 110V/220V
User questions & answers
| Question: | Am i able to control 2 subs with this unit |
| Answer: | No, not from independent channels of this unit. It is designed to separate three frequency ranges from the main input to three separate amplifiers. If you need to tune two subwoofers independently you would need a 2 channel EQ in line after the low output of this device. |
| Question: | I am using a laptop Audio jack to 2 powered speakers, i have a pass sub with amp. do i need this to send signal to the amp to push the sub |
| Answer: | No, not for full range speakers. Use this if you want to isolate high, mid, and low frequencies to specific speakers with their own amplifiers. |
| Question: | Can i hook up 2 amps |
| Answer: | This crossover is intended for you to amplify meds highs and lows separately |
| Question: | can this be used with a home stereo |
| Answer: | Yes. That's what I got it for. However you'll need separate component speakers much like pa speakers for bands. Also you'll need multiple power amps |
2-Way Replacement Speaker Crossover 800W
Product description
2-Way replacement speaker crossover 800 watts.
- Cx-5
- 2-Way replacement speaker crossover
- 800 Watts
User questions & answers
| Question: | Are these rated in RMS watts |
| Answer: | I would say NO, because alot of part dealers use peak power to rate power handling capability . RMS rating for this crossover will be half of 800 watts or 400 watts RMS. |
| Question: | WAY OK WHAT CABLE is for woofer and how much power send and the other is for tweeters what color is for and How much power send for |
| Answer: | I only send 1000 watts amp to 2 15" speakers so I guess 500watts for each speaker. |
| Question: | Is this for an 8 ohm or 4 ohm speakers |
| Answer: | 8 ohm. |
| Question: | This price is for the pair |
| Answer: | It's for a single crossover. |
Technical Pro XO3 3 Way Crossover with Subwoofer Output, 20Hz-25kHz 1dB Frequency Response, Black
Technical Pro
Product description
Specifications
1 Brand New Technical Pro XOB3 3 Way Crossover with Subwoofer Output
Crossover: Sub: 50-250Hz; Lo/Mid 70-1000Hz; Mid/Hi 480-7000Hz
Frequency Response: 20Hz-25kHz ±1dB
Low Cut Filters: 30Hz / -3dB, 12dB/Octave
Inputs: 1/4" (6.35mm)
Outputs: Balanced XLR, 1/4" (6.35mm)
Total Harmonic Distortion: 0.05%
Signal to noise ratio: 95dB
Impedance: Input - 100 Kohms, Output - 220 ohms
Dimensions: 19"w x 1.75"h x 5.75"d (483 x 45 x 146mm)
Weight: 5.5 lbs (2.5 kg)
110-220V Switchable
MSRP: $179.00
This Listing and Price is for 1 Brand New Technical Pro XOB3 3-Way Crossover with Subwoofer Output
- Balanced XLR And 1/4 Inputs
- Sub: 50-250 Hz
- Lo/High: 70-1,000 Hz
- Mid/Hi: 480-7000 Hz
Replacement Speaker Crossover 2000 Watts WORKS FOR JBL, Peavey, Cerwin Vega, Pyle-Pro, Mr.DJ, MANY BRANDS! EMB CX-21 High and Low Frequency Response the most technologically up-to-date
EMB
Product description
Perfect frequency distribution - our crossovers are designed to provide the perfect frequency distribution throughout your system to ensure the clarity and peak efficiency for your system. Your system will thank you - whether you are replacing your entire system or are Just trying to get better sound out of your basic component speaker, you will notice a big difference from your system. Smart design - these are designed specifically to be small and compact so that they are easy to install as Part of almost any build you are working on. No power needed - if you are looking for a simple way to handle multiple frequencies but without power cables or the price tag to go with it, CX4 has the perfect passive crossover for you. Never stop innovating attitude - CX4 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market. Technical Details: 2-Way Crossover High and Low Frequency Response Max Power: 2000W Frequency Crossover: 3.5kHz
- Frequency Crossover: 3.5kHz
- Max Power: 2000 Watts
- Technical Details: 2-Way Crossover
- High and Low Frequency Response
- Perfect frequency distribution - our crossovers
User questions & answers
| Question: | Is this for a 4 ohm or 8 ohm speakers |
| Answer: | this an 8 ohms crossover |
3-WAY Replacement Speaker Crossover 1200 Watts
Product description
This is a 2000 watt replacement crossover for many different brands of big major audio production companies. Such as JBL, Peavey, Pyle-pro, Cerwin Vega, and most likely many more.
- 3-Way replacement speaker crossover
- Highly transparent sound, very open clear, precise and neat
- High speed transients, detailed sound Show is like watching an actor as bright as day on the stage
- To listen to symphonies and passionate style of music It gives people a very enjoyable experience
- Power: 1200 Watts for high, tweeter, subwoofer
User questions & answers
| Question: | what the cross over .speaker it is for. what it real does. answer me please. I did't find no cross over in a sony speaker |
| Answer: | A crossover does two things. It separates frequencies from each driver that would ultimately hurt both sound and the mechanical motor of the driver. There are way better crossovers on the market. Some with a 6db roll off, 12 and 18db roll off. The higher the better to maximize both highs, mids and tighten up bass response. Most sub $500.00 speakers sold did not have a crossover installed. Installing one could change the sound of your speakers drastically. To do so, you need to do some homework on the speakers. |
| Question: | Does a speaker crossover protect individual speakers from overload |
| Answer: | Yes, but only when the crossover has fuse protection. The fuse would be a part on the board. Some have it some don't. |
| Question: | This crossover is sold pair |
| Answer: | If I understand your question, you're asking if this is a set of two crossover devices. No, it is a single item. |
| Question: | What are the crossover points on this unit |
| Answer: | I found this on another website:EMB Professional 4 or 8 ohm crossoverFrequency ranges:Woofer Frequency: 20Hz-500HzMidrange - 500HZ-4.5KHZTweeter - 4.5KHZ-20KHZ500 watts RMS/1000 watts peak each 3-way passive crossover network |
Soundxtrem ST-1500.2 3000 Watts Peak Power Amp 1/2/4 Ohm Car Stereo Amplifiers with Subwoofer Variable Crossover for Deep Bass Control 12dB/Octave High & Low Pass
Product description
Soundxtrem ST-1500.2 3000 Watts Power Amp 1/2/4 Ohm Car Amplifiers with Bass Knob
Product Highlights:
Boost your subwoofer with this 3000W digital SoundXtreme Stereo amplifier. Its 1 Ohm Stable technology, which uses better circuitry, maintains a clean power output to let your subwoofer perform without distortion.
Features:
Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
Subwoofer Variable Crossover for Deep Bass Control
Enchanced Variable Bass Boost
Soft Start & Muting - Overload, Thermal, Short Circuit Protection
Power & Protection Indicator-Remote Knob Level Control
Technical Details:
Maximum Output Power : 3000W
2 OHMS @ 1% THD : 1500W x 2
4 OHMS @ 1% THD : 750W x 2
Low Pass Filter : 50Hz - 250Hz
High Pass Filter : 80Hz-1200Hz
Frequency Response (-1dB) : 10Hz - 30000Hz
Signal to Noise Ratio : 70dB
Input Sensitivity : 200mV ~ 6V
Input Impedance : 22k Ohms
Operation Voltage (- Ground) : DC 12V
Speaker Impedance : 2 Ohms
Fuse Rating : 30A
Package Contents:
Soundxtreme ST-1500.2
- Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
- Subwoofer Variable Crossover for Deep Bass Control
- Enchanced Variable Bass Boost
- Soft Start & Muting - Overload, Thermal, Short Circuit Protection
- Power & Protection Indicator-Remote Knob Level Control
D-FLIFE 400W Adjustable Treble/Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters
Product description
Specifications:
1)Size: 7*5*2.5cm (LWH)
2)Suitable for Speaker Power: 400W or lower
3)Suitable for Speaker Impedance: 4 to 16 ohm
With 4 jumpers onboard to optimize your audio effect: Jumper A, B for bass; Jumper C, D for treble.
Details about jumpers:
Jumper A, B are used to control audio effect of bass range. A for lower limit while B for upper limit of the bass audio range. For some speakers, when Bass is turned up too much, the speaker will show distortion. When that happens: we remove the jumper cap of jumper A to limit super low Bass to bring distortion lower. When we remove the cap of jumper B, Bass is increased while cap of Jumper B is on, Bass is decreased. Jumper C and D are used to control Treble range. When cap of both jumper C and D are on, the sound of treble is loudest. When only cap C is on, the treble sound is lower. When only cap D is on, further lower. When both caps of C and D are removed, there is no treble sound. (Generally speaking, with the four jumpers, you'd sooner or later find your best sound effect. Anyway, all effects still depend on your actual test.)
How to use the splitter board:
First connect as per our diagram above (Treble, Low, Input), connect to speaker, seal air gap, we can begin to hear music while optimize.
Normally we use jumper A and let B idle. For jumper C and D: we need to hear the actual effect of treble. A general formula is: A+D=better Bass; A+C=clear Treble and Bass; A+CD=clear Treble and Bass (the overall effect inclined towards Treble); AB+CD=more mediant frequency. When Bass effect is unnecessarily high, we can remove cap A. Please optimize until you think the sound is best, and then fix the board with your speaker unit.
- Large capacity, reasonable design, beautiful appearance, quality achieve full self control.
- The crossover soprano + available bass binary frequency sound box, can also be used in 2.1 the high small satellite box and automotive loudspeakers.
- Inductance adopts anaerobic copper winding , and pure copper wire.
- Implementing overall debugging, no welding, using very convenient, and listening to the sound effects can implement debugging control according to their own interests.
- D-FLIFE 400W Ajustable Treble / Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters
2 PACK 3 way Crossover CRX-303 300 Watts Passive Crossover Car Audio Tweeter
Audiopipe
Product description
2- Audiopipe CRX-303 300W Crossovers Two Brand new Audiopipe CRX-303 300 Watt Crossovers. These are a very high-quality passive crossover network. This gives you the ability to have a woofer a mid speaker and a tweeter running off of one speaker wire input, it also powers each of those speakers at the proper frequency for optimum sound quality! This makes setting up or improving your car audio system way easier and quicker! This is a must-have for car audio installations! You will receive 2 CRX-303 Crossover's Specifications: Two Audiopipe 4-ohm Crossovers Woofer Frequency: 20Hz-316Hz Midrange Frequency: 700Hz-4kHz Tweeter Frequency: 1.5kHz-20KHz 12DB Per Octave Slope (4 OHMS) Enclosed ABS Cabinet Gold Plated Screw Terminals 150 Watts RMS / 300 Watts Peak High-Grade Polymer Capacitors Ferrite and Air Cooled Spools
- Audiopipe CRX-303 300 Watts Crossover 2 PACK DEAL
- High Grade Polymer Capacitors
- 3-Way Passive Crossover Network
- Ferrite and Air Cooled Spools
- 15 Watts RMS/300 Watts Peak
User questions & answers
| Question: | Is this 8ohms |
| Answer: | Well not really. This is a passive crossover and kind of relies on the proper impedance of the speakers to work. The input to an amplifier is not typically 8 Ohms. Sounds like you want an "active crossover". More expensive yes. |
| Question: | what is the quality of this item |
| Answer: | 2 / 4 ohms... |
| Question: | Can I use this ahead of my amps |
| Answer: | Can you give some details? |
| Question: | Do all the speakers connected to it need to be 4ohms |
| Answer: | Hi, it has Lake maps in it. I am not sure about the coast line since i do not live near one, but believe it may have those as well. I have used the hiking maps before, but have not used the lake maps. |
Audio Control Three.2 in-Dash Pre-Amp Equalizer/Subwoofer Crossover with Dual Auxiliary Inputs
AudioControl
Product description
In-Dash Pre-Amp Equalizer / Subwoofer crossover with Dual Auxiliary Inputs.Audio Control THREE.2 In-Dash Pre-Amp Equalizer / Subwoofer Crossover with Dual Auxiliary Inputs.
- In-Dash Pre-Amp Equalizer / Subwoofer crossover with Dual Auxiliary Inputs In-dash Pre-Amp Controller Two input channels and two, four, or six channels of output
- Stereo and Para-BASS equalization controls
- On-board pre-amp line driver up to 13 volts peak Master volume control and fader Selectable illumination - Cool Blue or Hot Red LED's! Compact ½ DIN chassis
User questions & answers
| Question: | If I have an aftermarket headunit such as a Pioneer head unit and a epic center; do I really need this product? how would it benefit me |
| Answer: | Yes. I have both installed. However I find that ii don't need the use of the epicenter anymore. The pre amp does both jobs. |
| Question: | Can I use this with my LC7i output converter |
| Answer: | This does not play bass well only hights and mids u will need a epicenter |
| Question: | Can I use this product along with my epicenter |
| Answer: | 4 Ohms |
| Question: | Does this product have the epicenter included? Or would i also need to buy the epicenter for spanish music (banda |
| Answer: | 1 - 10, Rating of 6. It is on the cheap side. However, it is $30... |
BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control
BOSS Audio Systems
Product description
BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control
- Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control
- Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz
- Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz
- Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
- Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
- Maximum Input Voltage 4.5 Volts, Maximum Output Voltage 9 Volts, S / N Ratio 110 dB, THD 0.010
- Dimensions: Depth 6.5” x Width 8.8” x Height 1.5”
- 1 Year Warranty
User questions & answers
| Question: | How many volts are the outputs? I have 8v outputs and id rather use my amps built in crossovers if this is going to reduce the voltage |
| Answer: | I am not sure. But... I am using two of these to drive one 4 channel amp, two 2 channel amps and 2 monoblock amps. All of them are different brands and none of my crossover outputs nor my amplifier inputs are at max. So in conclusion, it/they have enough. |
| Question: | how many amps can work with this cross over |
| Answer: | You can control three amps with this cross over. |
| Question: | Can I used this together with an equilizer for better sound on my car |
| Answer: | Yes will sound great |
| Question: | so if i got Boss amps will i need a Boss crossover |
| Answer: | Not really unless you want to keep all the equipment the same. |
Single Passive - Low Pass - Crossover - 1000 Watts, 4/8 Ohm, 125Hz
Product description
For quality and convenience, it's hard to beat a well thought out pre-assembled passive crossover network. Based on textbook-correct filter formulas and constructed expertly from top-quality components, these crossovers are a fast and easy way to get your loudspeaker system up and running.. Configurations include 2-way, 3-way, high pass, low pass, and subwoofer.
- Max. Power: 1000 Watts
- Impedance: 4/8 Ohm
- Crossover Frequency: 125Hz
- Dimensions : L - 7.5" x W - 4" x H - 2" (190.5mm x 101.6mm x 50.8mm).
User questions & answers
| Question: | Seller: can you get this with 180Hz or 200Hz instead of 125Hz |
| Answer: | Yes you can. If you go to Audio Control's webpage, you can pull up the manual in pdf form and see the wiring set up. But, you won't actually need an LC7i with this. It basically does what the Epicenter and LC7i does at the same time. Basically. But if you're loaded, and are addicted to retail, go for it. |
FMOD Crossover Pair 100 Hz Low Pass
Harrison Labs
Product description
FMODs™ feature a 12 dB per octave crossover slope and are compatible with all RCA type input amps. Sold in pairs.
- 12dB/Octave slope
- 24kt gold over brass construction
- 10 volts maximum RMS input
- One-year manufacturer warranty
- Made in the U.S.A
User questions & answers
| Question: | Do these two go on the amp input |
| Answer: | Male end in amp. |
| Question: | Can this be used in a PA setups between a mixer and a amp? Or is this just car compatable |
| Answer: | No, just the opposite. They cut everything above 100hz. I had used them to send signal to a subwoofer so it would only get the lower frequencies |
| Question: | Does it matter which direction these are hooked in - does the male end go into the mixer or the amp |
| Answer: | This Is The Only Frequency |
| Question: | Will this cut bass out I would like to use for a set of 6.5 so I would go from headunit to amp |
| Answer: | Epicenter should have line driver already installed in the unit... This product enhances highs and mids as well... Bought this product many years ago, still going strong... I believe when I purchased it, it drives the line to 13 - 14 volts, maybe more, that means also to highs and mids.. I believe the epicenter only enhances bass. |
Hakeeta Audio Crossover, 300W Three-Way Crossover Filter Audio Crossover, for KTV Stage Speakers.
Product description
The function of the frequency divider is to separate the mixed analog audio signals into high-pitched, mid-range and low-pitched parts, and then respectively send them to the corresponding high, medium and low woofer units for playing, thereby achieving the purpose of improving the sound quality.
Features:
1. This is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality.
2. High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film.
3. High-quality capacitors: low loss and high quality, no longer have the problem of electrolytic capacitors.
4. Ensuring large load capacity, long-term durability and very good sound quality.
5. Over-current protection design, simple and beautiful lines, reasonable component layout.
6. Small switch can adjust the treble (normally 3db can be added).
Specification:
Material: ABS
Color: green
Power: about 300W
Impedance: 4-8 Euro
Connectable speakers: <=12 inchs recommended
Install diagonal hole position: 19cm
Adjacent angles: 14.3cm and 12.7cm
Size: 150 * 135mm / 5.9 * 5.3in
Weight: approx. 372g
Package List:
1 * Frequency Divider
- This is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality
- High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film
- High-quality capacitors: low loss and high quality, no longer have the problem of electrolytic capacitors
- Ensuring large load capacity, long-term durability and very good sound quality
- Over-current protection design, simple and beautiful lines, reasonable component layo
Latest Reviews
View all
Hiking Baby Carrier Walmart
- Updated: 10.01.2023
- Read reviews
Seagate Mac Hard Drives
- Updated: 13.02.2023
- Read reviews
Paper Cutter Walmart
- Updated: 01.02.2023
- Read reviews
Mounted Chin Up Bars
- Updated: 07.02.2023
- Read reviews
Snugg Ipods
- Updated: 28.03.2023
- Read reviews