10 best audio converter with fibers

Product description

XLR Audio to Fiber Extenders support 4 Channels - 4 independent Balanced XLR audio ports of 16-bit digitally encoded broadcast quality audio over one Single Mode or Multimode (MM) optical fiber. These units are single direction - audio signal is transmitted from T (Transmitter) in the direction of R (Receiver).



These professionally designed devices are typically used in applications for Staging, Theaters, Stadiums, Parks, Broadcast, studio audio and professional AV applications, etc., and are available for stand-alone and desktop type, or wall mounted, installations. Use SC UPC / PC connectors with SM and MM fiber optic cables.



Plug and Play design ensures easy installation and operation, no configuration or driver installation are required.



Specifications:



Fiber Optical Port:

• Wavelength: 1310nm
• Fiber: single fiber multimode (MM) or single mode (SM)
• Transmission range: 500m for MM or 20km for SM
• Optical interface: SC simplex (only 1 fiber needed)
• Optical fiber type: 9/125u single mode, 50/125u or 62.5/125u multimode
• Output power: -14~ -8dBm
• Rx sensitivity: -30dBm

Balanced XLR Audio Ports:

• Number of Channels: 4
• Input Connector: XLR (Female)
• Output Connector: XLR (Male)
• Input / Output Impedance: 10K Ohm
• Input capacitance LINE inputs: 10 pF
• Max input/output voltage: 1Vp-p
• Frequency Response: 20 Hz～24kHz @±3dB
• SNR: > 80dB

General Specifications

• Voltage: AC 90 - 260 AC, US type Power Plug
• Power Consumption: ≤5W
• Working temperature: -20°C ~ 60°C
• Relative Humidity: 0% ~ 95% (non-condensing)
• MTBF: >100,000 hours
• Dimensions: 168mm (6.61in) × 154mm (6.06in) × 45mm (1.77in)
• Send 4 x Balanced Audio Channels of 16-bit digitally encoded broadcast quality audio over 1 single mode or multi mode optical fiber
• Extend Your Studio Quality Audio Signal for distances of up to 12.4 miles (20 km) over Single mode (SM) optical fiber and 0.5 km MM (0.31 mi) over Multi mode (MM) fiber
• No Loss, No Delay, Pure & Clean fiber optic audio signal transmission, 16-bit digitally encoded broadcast quality
• Plug & Play - Simply Plug in an Optical SC port and XLR audio connectors at Transmitter & Receiver sides, and you will have a crystal clear sound instantly
• Full Set includes Optical Fiber to XLR transmitter, receiver & AC power supply, plus user manual

• Digital to Analog Audio Converter - Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed)
• Easy to set up & Lightweight - Connect the Optical or Digital Coax output of HDTV, TV Box and other devices with this digital to analog audio converter, then RCA L/R or 3.5mm Jack output on the other side with your headphone or stereo speaker. Not need any switch, just plug and play, it will automatically detect the audio signal to work immediately. Also, this DAC converter is compact size, easy to carry, ideal for home or professional audio switching.
• Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output; Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）
• Sampling rates supported - Provides electromagnetic-noise-free transmission, sampling rate at 32, 44.1, 48, and 96 KHz, 24-bit S/PDIF incoming bit stream on left and right channels. (This optical digital to analog converter is incompatible with 5.1 Channel Signal such as Dolby AC3, please set the audio output to PCM or LPCM before using this adapter.)
• ▲Easy to Install and Simple to Operate - Can be Used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.★★Package Includes:1*Main unit (Digital to Analog Audio Converter), 1*Optical Cable, 1*USER'S Manual. 1*DC 5.5mm USB Power Cable 【NOTE: excluding 5V DC power supply, self provided】★★

Product features

Digital to Analog Audio Converte

• Plug and Play
• Input Audio Connector:
• 1 x Toslink, 1 x RCA (Coaxial);
• Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack; Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included); Do Not Use Other Plugs, It Can Only Use 5V 1A Plug
• Specifications:
• 1.Housing: Full Metal
• 2.Weight: 90g 3.Input audio connector: 1 x Toslink, 1 x Coaxial
• 4.Output audio connector: 2 x RCA(R/L), 1 x 3.5mm Jack
• 5.Powered by 5V/1A power adapter
• 6.Consumption: 0.5W (max)
• 7.Dimension: 75 x 55 x 22mm

Digital to analog audio converter

• 5V1A
• TOSLINK
• Coaxial

Digital to analog audio converter

• C
• onverts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed)

Audio adapter optical coax to rca aux

• Good Anti-Interference function makes the sound pure and clear.
• Ideal DAC converter converts coaxial or slink digital audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously (not capable of being reversed). Can be used with PS3, Xbox, Blu Ray Players, HD DVD, Home Cinema Systems, and more devices which lack RCA L/R or 3.5mm jack outputs.

Audio adapter optical coax to rca aux

• Ideal DAC converter converts coaxial or slink digital audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously (not capable of being reversed). Can be used with PS3, Xbox, Blu Ray Players, HD DVD, Home Cinema Systems, and more devices which lack RCA L/R or 3.5mm jack outputs.

Audio dac

• Easy to Install and Simple to Operate; Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc.
• Note:
• 1.Do Not Use Other Plugs,It Can Only Use 5V/1A Plug.
• 2.Please don't forget to set the audio output to PCM or LPCM as it is not compatible with 5.1 Channel Signal, such as Dolby Digital or DTS 5.1, Dolby-AC3.
• 3.This DAC may have some compatibility problem with Youtube or Netflix.
• 4.If you are using TV as the audio resource, please do not forget to set your TV audio output to PCM/LPCM(Steps: Device homepage--system setting--image and sound---voice setting--digital audio output--PCM/LPCM).
• 5.If you are using Panasonic TV as audio resource, please set TV audio output to SPDIF output.
• 6.If you are using Samsung TV as speakers, please turn on its external speakers(Steps: menu - sound - speaker settings - external speakers - on).

Product description

Features: 100% Brand new and high quality! This Digital to Analog Audio Converter is designed for either home or professional audio switching.

It converts coaxial or toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier

via standard RCA jacks. Converts coaxial or toslink digital audio signals to analog L/R audio and connects to an external device such as an amplifier

via standard RCA jacks Supports uncompressed 2-channel LPCM digital audio signal output Supports sampling rate at 32, 44.1, 48, and 96 KHz 24-bit S/PDIF

incoming bit stream on left and right channels Provides electromagnetic-noise-free transmission Easy to install and simple to operate Compact size





Products properties:

Application: Multimedia

Gender: Female-Female

Model: KG90 KG70 Connector color: black

Product Properties: Optical

Fiber Connectortype: RCA

Input Audio: Coaxial or Toslink digital audio

Output Audio: L/R audio

Input audio connector: Toslink,1XRCA(Coaxial)

Output audio connector: 2XRCA R/L Sampling rate: 32, 44.1, 48 and 96 KHz

Operating temperature: 0~70°C

Operating humidity: 10%~85%RH(no condensation)

External power supply: 5V DC/1A

Power consumption: 0.5W

Packaged: yes, opp

Specifications:

Input Audio: Coaxial or Toslink digital audio signals to analog L/R audio

Output Audio: L/R audio

Input audio connector: 1 x Toslink, 1 x RCA (Coaxial)

Output audio connector: 2 x RCA(R/L)

Power input: AC 100-240V 50/60Hz

Output: DC 5V 1A Product size: 53 x 43 x 23mm

Package included: 1 x Digital to Analog Audio Converter 1 x Fible Optical Cable 1 x usb Power Supply

• *100% Brand new and high quality!This Digital to Analog Audio Converter is designed for either home or professional audio switching,It converts coaxial or toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA jacks.
• *Supports uncompressed 2-channel LPCM digital audio signal output,Supports sampling rate at 32, 44.1, 48, and 96 KHz
• *24-bit S/PDIF incoming bit stream on left and right channels
• *Provides electromagnetic-noise-free transmission
• *Compact size easy to install and simple to operate

Product description

SiYear Digital Toslink Fiber Optical Splitter 1 in 2 Out Audio Optical Splitter Cable(Black-20CM/)



Specification:



Colour: Black

Product Size: 2.17 X 1.69 X 0.63 inch

Connector：Input: 1 Male Toslink & Output:2 Female Toslink



Features:



- Optical Audio Splitter Adapter, 1 to 2, allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television;

- Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder;

- 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen vibration, giving you the ultimate listening experience;



Compatible:



-Connect digital TV/STB to power amplifier

-Connect computer to power amplifier

-Connect PSII/PSIII/HDVD to power amplifier

-Connect DVD/CD Player to power amplifier

-Suitable for Samsung / Sony / Sharp / Whaley / JVC / Philips/LG TVs and more



Note:



-It just supports 1 input to 2 outputs at same time; If 2 inputs to 1 output, you need turn off one of them, then turn on another one

-2 Input 1 Output: Two input device only one device work,please turn off one of input device,otherwise, there will be noisy sounds.

-1 Input 2 Output: Two outputs devices can work at the same time,such TV to soundbar and audio receiver.



*Due to the compatibility issue of this product, not all devices can use this function, please buy the buyer to read the details, or if you don't understand, you can ask the buyer who has purchased the product. We hope that you can get the best experience, if you have question ,and also you can send we email,24 hours we will reply.



Package: Toslink 1 in 2 Out Digital Fiber Audio Optical Splitter Cable (20CM)

• Toslink 1 in 2 out Audio Fiber Adapter,Connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television
• This adapter is designed to split a single signal into two. Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder.
• Toslink Digital Optical Fiber Optic Splitter 1 in 2 Out Audio Adapter Cable
• This splitter allows you to connect one toslink optical source and split it into two signals.Perfect for connecting your DVD player, or other digital audio source to both your receiver and recorder.
• Please remove the yellow cover before use.Otherwise it can not be inserted into the TV.(Note: If 2 female inputs to 1 male output,2 female inputs can't work together at the same time!)

User questions & answers

Question:	Will this allow me to connect my dvr and DVD players to my sound bar
Answer:	I'm not aware of such a splitter, but there are gender changer cable adapters which would allow you to make your own.
Question:	Can I have one male input with a male and a female output
Answer:	We don't have enough info about inputs and outputs on your tv so I'll tell you what I did. For about $50 you can buy a wireless adapter that plugs into one of HDMI inputs on the back of the tv. There are different models to choose from, mine is Actiontec ScreenBeam Mini 2. I bought it on Amazon.
Question:	My smart tv has audio on my soundbar but i want to play musicfr my phone
Answer:	I have used this device successfully to connect a sound bar and ear phones with this splitter. You may need to check the format of the optical signal (PCM?) etc. to be sure you have the right signal format if it does not work when you first plug it in. Lee
Question:	Elderly in laws has tv w/1 optical & has vcr connected to it. Want 2 buy soundbar 4 them but has optical. Will this work? If not what do i need
Answer:	SATA is a hard drive. However, I only know because I googled it. I bought the machine because I needed a CD duplicator. I record the Sunday Sermon and make copies for the members who desire one. I'm not an expert on the equipment. I only know that this machine copies fast and well. It's the best duplicator I've ever purchased. Sorry I'm no help other than that.

Product description

This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install. 1. Converts Coaxial or Toslink digital audio signals to analog L/R audio 2. Supports sampling rate at 32, 44.1, 48 and 96 KHz. 3. 24-bit S/PDIF incoming bit stream on left and right channels 4. Provides electromagnetic-noise-free transmission. 5. Easy to install and simple to operate.

• Converts Coaxial or Toslink digital audio signals to analog L/R audio
• Supports sampling rate at 32, 44.1, 48 and 96 KHz，192KHz
• 24-bit S/PDIF incoming bit stream on left and right channels
• Provides electromagnetic-noise-free transmission.
• Easy to install and simple to operate.

Product description

Specification:

Item Name: 5.1CH audio decoder

Color: Black

Material: Aluminum alloy 

Voltage: 110-240V

Support Audio Formats: MP3, AC3, DTS, WAV, WMA, AAC, FLAC, APE, OGG, M4A, M3U8

Signal to Noise Ratio: 120db

Resolution: 80db (1KHZ)

Channel Imbalance: 0db

Sampling Rate: 32-192 KHz

Bit Rate: 16-24 Bit

Response Frequency: 20Hz-20KHz +/-0.7db

Total Harmonic Distortion (THD): 20Hz-20KHz 0.25-0.065%

Total Harmonic Distortion + Noise (THD + N): 1KHz 0.15%

Analog Output Level: 2.2V

Product Appearance Size: Approx.105x75x25mm/4.1x3x1in

Input Interface: Fiber interface x 1, coaxial interface x 1

Output Interface: RCA interface x 6

Maximum Work Flow: 400mA

Operating Temperature / Humidity: - 70 ° C / 10% - 80% RH (no condensation)

Storage Temperature / Humidity: 10 - 80 ° C / 5% -90% RH (no condensation)



Package List:

1 x Host

1 x Instruction Manual

1 x Power Adapter

1 x Fiber Optic Cable

• ★★Clear conversion: This audio converter can automatically identify the fiber and coaxial input signals after connecting the power supply. The panel design inputs the audio channel indicator to clearly display the input audio format.
• ★★ Powerful: This audio decoder can convert optical fiber signals and coaxial digital audio signals into analog audio signal output. Support Dolby AC-3/DTS and so on. Let many families, schools, plazas, concert halls, cinemas and other places enjoy the shock effect brought by DTS or Dolby sound field.
• ★ ★ anti-jamming: aluminum alloy shell, black elegant and noble, full of texture, compact size, easy to carry, audio converter anti-interference. The output is for an RCA interface or a 3.5mm headphone audio port for easy installation.
• ★★Multi-format audio: The audio decoder converts fiber-optic signals and coaxial digital audio signals into analog audio signal outputs. Supports decoding of audio in multiple formats, such as MP3, AC3, DTS, WAV, WMA, AAC, FLAC, APE, OGG, M4A, M3U8, etc. It supports 5.1-channel two-channel output, which is convenient and fast.
• ★ ★ High quality: more durable, gold-plated plug, effective to ensure signal transmission quality and extend the service life, widely used in VGA monitors, TV boxes, power adapters, 5.1 audio, projectors, desktop computers and other electronic equipment.

Product description

Feature:

1. Support optical fiber or coaxial input, optical fiber or coaxial output(signal through). Output volume of ARC and 3.5mm headphone can controlled by the TV(CEC).

Specification:

Condition: 100% Brand New

Item Type: DAC Audio Converter

Material: Aluminium Alloy

Color: Black

Power Supply Interface: Micro USB

Maximum Working Current: 100mA

Working Environment Temperature: -10~+ 55℃

Storage Temperature: -20~+ 60℃

Working Humidity: 10~90％RH(No Condensation)

Storage Humidity: 5~95％RH(No Condensation)

Weight: Approx. 170g

Shell Size: Approx. 9x7.3x2.1cm/3.5x2.9x0.8inch

Package List:

1 x DAC Audio Converter1 x Manual 1 x USB Cable

• Can through for HDMI/ARC interface will support for ARC function of the voice of the television to return to the fiber optic adapter, coaxial, 3.5 mm coaxial headphone hole, support optics or coaxial digital audio signal conversion, a stereo analog signa
• Suitable for home theater, teaching, training structure, meeting occasion, home appliance stores and other places.
• Support for HDMIARC, optical fiber, coaxial input switching functions, supports transmission of 192KHz audio sampling rate.
• Support optical fiber, coaxial, for RCA stereo, 3.5mm stereo headphone simultaneous output.
• 3.5mm stereo headphone port with high performance audio amplifier. Optical fiber coaxial output interface supports 5.1 channel transmission.

Product description

Audio to Fiber Extenders support 2 Channels (L+R) or 2 independent RCA audio channels of 24-bit digitally encoded broadcast quality audio over one Single Mode optical fiber.



These fiber optic transmitter and receiver devices are typically used in applications for Staging, Theaters, Stadiums, Parks, Broadcast, CCTV audio and Professional AV applications, etc., and are available for stand-alone and desktop type, or wall mounted, installations. Use SC UPC / PC connectors with your Singlemode (SM) fiber optic cables.



Plug and Play design ensures easy installation and operation, no configuration or driver installation are required. 2 simple LED indicators, one for fiber and one for power are provided to instantly monitor the system’s status.



AD-net’s RCA L/R stereo / mono audio converter transmits analog stereo audio signals up to 1.24 miles, or 2 km using a SingleMode (SM) fiber cable strand over 1310 nm. Each set consists of two units, one on the transmitter side, and one on the receiver side, that can be connected to a RCA left / right analog stereo audio source and RCA stereo audio speakers or receiver, or 2 separate mono RCA channels can be sent over the fiber independently.



Specifications:



Fiber Optical Port:

• Fiber Optic Wavelength: 1310 nm
• Distance: up to 1.24 miles (2 km)
• Output Power: -14 ~ -8dBm
• Fiber Type 9/125 Single-Mode
• Output Power: -14 ~ -8dBm
• Rx Sensitivity: -30dBm
• Optical Connector Type: SC/UPC (blue)


Audio:




• Input/Output Impedance: 600hm
• Max Input/Output Voltage: 3.0Vp-p
• Frequency Response: 10Hz ~ 29KHz @+/- 30 dB
• SNR: >70 dB
• Connector: RCA


Other:




• Operating Temperature: -20°C - +75°C
• Dimensions: 104x104x28 mm (4.09x4.09x1.1)
• MTBF: >100,000 hours
• Power Consumption <5W
• Send 2 RCA Audio Channels of 24-bit digitally encoded broadcast quality audio over 1 single-mode optical fiber
• Send your Audio Signal for distances of up to 12.4 miles (20 km) over SINGLE MODE optical fiber (1310 nm wavelength)
• Plug & Play - Simply Plug in an Optical SC port and RCA audio, and you will have crystal clear sound instantly
• No Loss, No Delay, fiber optic audio signal transmission, 24-bit digitally encoded broadcast quality
• Full Set includes Optical Fiber to RCA transmitter, receiver & AC power supply, plus user manual

• Adopted 24k Gold interface, low-loss Fiber optic, low-jitter synthetic fiber and metal interface bring excellent sound quality experience
• For CD/DVD/PS3/PS4/Xbox 360/Xbox one/Xbox One S.
• Toslink Digital Optical Fiber Optic Splitter 1 in 2 Out Audio Adapter Cable,For CD/DVD PS3 X-Box360 Computer.
• The TosLink 1 x 2 Optical Audio Splitter Adapter allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television.(note: If 2 female inputs to 1 male output,2 female inputs can't work together at the same time!)
• Package include:1xFiber Optic Splitter Cable.

Product features

Compatible with:

1. Connect DVD/CD Player to power amplifier
2. Connect computer to power amplifier
3. Connect PSII/PSIII/HDVD to power amplifier
4. Connect digital TV/STB to power amplifier

How do you use it?

• Please remove the yellow cover before use.Otherwise it can not be inserted into the TV.
• Usage 1: Usage 1: Use the Male port as input port and the 2 Female port as output port, you can connect 2 output devices,working together.
• Usage 2: Only connecting one input device with the Female ports at one time, the 2 Female ports CANNOT be used as input ports at the same time.

Specifications:

• Input: 1 Male Toslink
• Output:2 Female Toslink
• Product Size: 55 X 43 X 16 mm approx
• The Cable length: 180 mm approx

Package included:

• 1 x Optical Fibre Audio Splitter.

Note:

• 1 Input 2 Output-Two outputs devices can work at the same time,such TV to soundbar and audio receiver.
• 2 Input 1 Output-Two input device only one device work,please turn off one of input device,otherwise, there will be noisy sounds.
• This splitter allows you to connect one toslink optical source and split it into two signals.For connecting your DVD player, or other digital audio source to both your receiver and recorder.

• 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input
• 【Audio Format】 Support multi-channel surround sound, uncompressed PCM audio and compressed 5.1 audio including Dolby Digital (AC3), DTS to the audio processor, or A/V receiver with the capacity of decoding audio source. The highest support 192 kHz sampling rate. Noise-free transmission
• 【Easy to Setup】 Plug and play, no software and driver required. Come with 5V1A power adapter (support 100V-240V input), no need to prepare by yourself
• 【Long Distance】Use Optical fiber cable loss less the 0.2Db/m, Output distance is up to 30 meters (98 feet); Use the standard Digital Coaxial cable output can be up to 10 meters (32 feet)
• 【Wide Applicabilit】Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port.

User questions & answers

Question:	Unlike your digital optical to analog audio converter, will the optical to coaxial digital give me 5.1 surround sound
Answer:	It will not spilt the optical.
Question:	Will this model splite 1 optical in to 2 optical out
Answer:	Yes (I'm really surprised by the answers here). I tried using the device as a bridge between an RME audio interface and a Line 6 Helix, and there was noticeable lag when monitoring guitars--lag that didn't exist using either device alone. I don't think that can be accounted for by A/D or D/A conversation given the digital signal, so the only thing I can figure is that the converter created the lag (I monitored directly from the RME device, not a DAW). The lag was relatively minor; I don't think it would matter for someone watching TV. But for music creation, it mattered to me. Someone else might be able to tolerate it.
Question:	Is there any lag when using this converter? Even a small amount
Answer:	There are two different models entered as different "colors." (I hate when vendors do this!) One has two analog outputs (RCA and 3.5 mm), the other two digital outputs (optical and coaxial). Both models have two digital inputs, one optical and one coaxial. The all-digital model has an input selector switch. I don't know what would happen if you connected both inputs on the analog model, which appears to lack this switch. Anyway, in both models it appears that both outputs are active simultaneously, no matter which input is used. So the answer to your question (which is about the all-digital model) appears to be YES.
Question:	Will this model split 1 coaxial to one optical and one coaxial
Answer:	As the name suggests, this is 1 in(put) 2 out(puts). I use one of these to direct the sound from TV (the 1 input) into two different sound devices, a sound bar and Bluetooth sending unit for silent TV watching. (2 outputs). What you are proposing is 2 in(puts) into 1 output. It _might_ work if you insured that the only one device was sending a signal at any one time, but that is not what this was designed to do. What you are looking for is an optical _switch_, not a splitter.