9 best audiovox subwoofer cables
Product description
Subwoofer audio cables connect a subwoofer to an a/V receiver for improved low frequencies. Improved connection from corrosion-resistant, gold-plated RCA connectors.
- Improved Connection from corrosion-resistant, gold-plated RCA connectors
- Easy installation with ergonomic design
- Directional noise-drain construction prevents noise transfer from other components
- Improved sound from twisted pair construction
- Improved signal transfer from oxygen-free copper conductor
User questions & answers
Question: | It appears the antennas has an rca plug on the end of the coax. does that fit the radio antenna port? doesn't look like it would fit |
Answer: | This item is NEMA 10-50R which is 3 Pole 3 Wire 50A 125/250 Volt |
Question: | Will this antenna plug into a Sangean TB-100 (Toughbox)? If not does anyone know of an antenna that will |
Answer: | No cover plate. |
Question: | Does this antenna improve AM or FM reception or both |
Answer: | The Leviton 84026 should line up perfectly with the mounting holes directly at 12:00 and 6:00 on the face of the receptacle. |
Product description
Mediabridge Ultra Series subwoofer cable connects a subwoofer speaker to an audio component like a stereo receiver or sound system, while offering excellent bass response & flexibility. This Low-loss, wide spectrum coaxial cable is the ideal medium for low-frequency signals produced by subwoofers, providing Deep/precise audio quality. Built with a copper clad center conductor, dielectric insulation, aluminum braiding & 2 layers of foil shielding, for natural sounds & rejection of hum/static that occurs when devices are placed near each other. A split-tip center pin ensures high contact pressure & conductivity. Uniquely gripped Color-coded molds & corrosion-resistant gold-plated RCA connectors provide a consistently tighter fit than commonly rolled cables with wider tolerances. Ultra Series cables are made from premium materials for a pro-grade output. This cable is finished in a durable, yet pliable PVC jacket for easy installs. Product Features - connects a subwoofer speaker to an audio component - coaxial cable with copper clad center conductor, dielectric insulation, aluminum braiding & dual foil shielding - low energy loss & rejection RF/EM interference - corrosion-resistant gold-plated RCA connectors with split-tip center pins for high contact pressure & conductivity - tough, yet flexible PVC jacket compatibility - devices with RCA ports, like a subwoofer, stereo receiver, sound system or other audio component - Works with S/PDIF, digital & composite video interfaces installation plug-&-play: ready to use, once each end is connected to its respective port on a compatible device notes also known as a digital audio/video coaxial cable or a digital audio coaxial cable
- Ideal for connecting subwoofer speakers to audio components, such as stereo receivers or sound systems, while offering excellent bass response and flexibility.
- Low-loss, wide spectrum coaxial cable great for the low-frequency signals produced by subwoofers, allowing for deep and precise audio quality.
- A split-tip center pin ensures high contact pressure and signal strength, while unique gripped molding and corrosion-resistant gold-plated RCA connectors provide a consistently tighter fit than commonly rolled cables with wider tolerances.
- A copper clad center conductor, dielectric insulation, aluminum braiding and 2 layers of foil shielding, for maximum protection against the hum/static encountered when multiple devices are in close proximity of each other. The cable is finished in tough, yet pliable PVC jacket with color coding, for easy routing and quick installation.
- This cable is backed by Mediabridge's Limited 1 Year Warranty. Includes adjustable & reusable Velcro cable strap for easy organization & storage.
User questions & answers
Question: | Can these be used for normal everyday audio or is it strictly subwoofer only |
Answer: | I inquired as to the part numbers and availability of replacement paddle faces for other colors. As of mid-March 2017, they apparently are only available via electrical supply distributors, but are supposed to become available via retail channels (including Amazon) "very soon". I was told that the part number and colors are as follows: FOR DIMMERS: White (DDKIT-00W), Ivory (DDKIT-00I), Light Almond (DDKIT-00T), Gray (DDKIT-00G), Black (DDKIT-00E), and Brown (DDKIT-00B); FOR SWITCHES: White (DDKIT-0SW), Ivory (DDKIT-0SI), Light Almond (DDKIT-0ST), Gray (DDKIT-0SG), Black (DDKIT-0SE), and Brown (DDKIT-0SB). |
Question: | Do I need to buy 2 of them |
Answer: | The power rating is ok, but if you use these simple dimmers on things that aren't simple light bulbs, they can be damaged. I have destroyed Halogen lights that have a built-in transformer by putting them on such a dimmer. Live & learn! |
Question: | Does it have two connectors on each end |
Answer: | Yes, the switch is a simple on-off switch for a one-way light. |
Question: | Do I need 2 cords? I’m connecting a klipsch r112sw to a denon avr-x4400h |
Answer: | I am using mine as a dimmer switch and it works fine. |
Product description
Mediabridge Ultra Series RCA Y-Adapter - 1-male to 2-male connects a TV, CD/DVD player or other rca-enabled device to the left & right audio ports of a subwoofer or amplifier. The Y-Adapter has 1-male to 2-male RCA connectors, which splits audio components for a Genuine surround sound experience (no extra cables needed). the Low-loss, wide spectrum coaxial cable is the ideal medium for low-frequency signals produced by subwoofers, providing Deep & precise sound quality. Dual-shielded with braided copper shielding, aluminum Mylar shielding & gas injected foam dielectric, for natural sounds & rejection of hum/static that occurs when devices are placed near each other. Split-tip center pins ensure high contact pressure & conductivity. Uniquely gripped Color-coded molds & corrosion-resistant gold-plated connectors have tighter fits than commonly rolled cables with wider tolerances. Ultra Series cables are made from heavy-duty materials for a pro-grade output. Finished in a durable, yet pliable PVC jacket for easy installs. Product Features - connects rca-enabled devices to the left & right audio ports of a subwoofer speaker or amplifier - 1-male to 2-male RCA connectors, which acts as a splitter for audio components (no extra cables needed) - dual-shielded coaxial cable with braided copper shielding, aluminum Mylar shielding & gas injected foam dielectric - low energy loss & RF/EM rejection - corrosion-resistant gold-plated connectors with split-tip center pins - tough, yet flexible PVC jacket compatibility devices with RCA ports, like a TV, CD/DVD player, subwoofer & amplifier installation plug-&-play: the cable is ready to use, once each end is connected to its respective port on a compatible unit.
- Ideal for connecting a TV, CD player, DVD player or other RCA-enabled device to the left and right audio ports of a subwoofer or amplifier, while offering excellent bass response and flexibility.
- A simple Y-Adapter can open up a whole new world of possibilities for your audio components. This adapter splits your audio components for a genuine surround sound experience (no extra cables necessary).
- Low-loss, wide spectrum coaxial cable great for the low-frequency signals produced by subwoofers, allowing for deep and precise audio quality. Split-tip center pins ensure high contact pressure and signal strength, while unique gripped molding and corrosion-resistant gold-plated RCA connectors provide a consistently tighter fit than commonly rolled cables with wider tolerances.
- Built with braided copper shielding, aluminum Mylar shielding and gas injected foam dielectric, for protection against the hum/static encountered when multiple devices are in close proximity of each other.
- Finished in a heavy-duty, yet flexible PVC jacket with color coding, for easy routing, quick installs and maximum signal transfer, so your audio components deliver all the performance you expect. Includes adjustable & reusable Velcro cable strap for easy organization & storage.
User questions & answers
Question: | I need to connect my samsung blu ray to my surround sound system, blue ray has coaxial jack, surround has RCA jacks, will this work |
Answer: | Yes. You don't necessarily need to use both sub inputs (can use a mono cable), but you will gain some sensitivity (a little more output from the sub, and can help with some sub's auto turn on feature) by hooking one end up to your receiver or prepro's sub output and the other ends to your left and right sub inputs. |
Question: | Can it connect a klh subwoofer to a pioneer receiver |
Answer: | Only connect receiver to line in on sub! |
Question: | Can I connect left and right input from subwoofer to subwoofer output on amp |
Answer: | The audio frequency is a very small fraction of the spectrum that any wire can do. The issue is what you plug your wire into. If it produces the desired frequencies, this wire will transmit it. |
Question: | Can use this cable to connect a new receiver with an older subwoofer that has line in and out rca connections? my receiver only have the subwoofer out |
Answer: | No, this is a standard RCA cable |
Product description
An Amazon Brand
- Subwoofer cable for connecting subwoofer speaker to a stereo receiver, sound system, or other compatible audio device
- Corrosion-resistant gold-plated RCA connectors; split-tip center pins for optimal pressure and conductivity; tough, yet flexible PVC exterior
- Expertly transmits low-frequency signals generated by subwoofers, ensuring exceptional sound quality and bass response
- Accommodates devices with RCA port; works with S/Pdif, digital, and composite video interfaces; backed by an Amazon Basics 1-year limited warranty
User questions & answers
Question: | what is the packaged dimensions |
Answer: | Copper clad steel, which is a cheap and low quality design. Solid copper would cost a few cents more and would be much better. |
Question: | Will this work for a 5.1 ss system? have a powered sub-woofer with speaker cable to two satellite speakers. broken pin in one, no sound |
Answer: | If it's a regular wire/hdmi cable, 25 meters. If it's a powered cable, it can go over 100 meters without any degrade. |
Question: | Cca or pure copper |
Answer: | I cant tell you diameter but the pin is between 3/16 inch and 1/8 inch. just shy of 1/8 inch thickness. Hope this was helpful. |
Question: | A stupid question: how long will I need to be a sub-woofer cable before it loses signal |
Answer: | There are two major parts to each pin. There is the gold plated core with two set screws that clamp the speaker wire, and a screw on color coded aluminum barrel that protects the core from coming in contact with another pin. There is no "insulation" on the pin wire lead or core. The aluminum barrel is the only thing outside the gold core. Aluminum is a conductor though, so I would try and keep the plugs apart. I have never "tested" if they will short if they come in contact with each other. These are very easy to use and a great option if your equipment only accepts some kind of a wire lead. |
- PRO Series RCA Y adapter cable: Hook up your home theater, subwoofer box or HiFi system with our RCA Y-cable
- Pure copper: Provides maximum power and efficiency of signal transmission for a clear, unmatched audio experience
- Double shielding: For maximum protection from interference to achieve the highest quality sound. Hear the difference.
- 24K gold plated connectors: Corrosion resistant gold plating minimizes interference.
- 36 months manufacturer warranty
Product description
Rca Rcr503Br 3-Device Palm-Sized Universal Remote
- Controls Up To 3 Devices, Replaces and Consolidates Most Major Remote Brands, Simplifies Device Setup With Automatic, Manual & Direct Code Search Methods
- Palm-sized design makes the remote easy and comfortable to hold
- Easy-to-use keys with multi-colored keypad, 2 AAA batteries sold separately
- Keys for TV, DVD or VCR, and satellite receiver, cable box, or digital TV converter
User questions & answers
Question: | Can I change the input with this remote |
Answer: | No, you don't have to buy anything else to make it work. It is really lightweight & does a fantastic job on its own. I have mine hanging on just a pushpin behind the television, you don't even know it's there! It's that simple. |
Question: | seems to be mixed info on if this will work with old receivers? I have a sony str-d590 that i want to control |
Answer: | Yes there is a black option available |
Question: | will this work for an LG tv |
Answer: | I am not sure - I live in a big city and though my apartment is on a lower floor, I have not had any trouble getting reception. In fact, the picture is very clear, and I get many channels! It may not depend so much on being near a city as being near a tower that transmits signals. You should check to see which is the nearest tower. |
Question: | what are the codes to the devices |
Answer: | To know what stations you can get and what kind of antenna you need to get them, put in your address in antennaweb.org. That site will give you a color coded list of available stations for your address, how far away each tower is, degrees from center. When you click on each station, there will be a popup telling you what kind of antenna you'd need to get that station. 58 miles away is pretty far. It would be my guess you'd need an outside antenna for that distance. But it also depends on terrain between you and the towers, where your tv is in your house, if there's a window nearby, direction your tv room faces, the strength of the signal from each tower, and other factors. It's a system where you have to just try different things to see what works for your conditions. I use indoor antennas. I prefer NONamplified ones plugged into separate ampts, so I can remove the amp if I want. I get a lot of stations; all of my towers are less than 25 miles away. My tv room faces the direction of where the towers are, and there's a window 3 feet from my tv. I'm lucky. Urban settings are more likely to be that way. |
Product description
You can wirelessly listen to you music or movies anytime in the car with the Audiovox wireless headphones. No longer do you need annoying cords stretching across the car. These headphones have a fold flat design that makes it very easy to store. It has an auto off switch to prevent battery drain when the headphones are accidentally left on. These headphones come with batteries so they are ready to be used right out of the box.
- Dual change wireless headphones
- Fold-flat design
- Auto shut off
- Batteries included
User questions & answers
Question: | is it a pair or one |
Answer: | They have nothing more extensive listed on their site and I have searched youtube for any installation videos and found none. I followed the enclosed instructions and the system works as advertised. The left of right markers light when a car is in the blind spot and if I turn on the signals it beeps. In reverse it warns of cross traffic also with a beep. Look at your control module and make sure the green light on it is blinking, that means it has found a GPS signal and is ready. Check all your wiring. If all is OK I would say you have a defective unit. |
Question: | What comes with |
Answer: | The license plate frame has two radar sensors pointed out at angles to detect a car in your blind spot. The signal is sent to the control module via a wire and sets off either the left or right indicator light. |
Question: | Have old sony univega tv w/ built-in infrared xmitter to headset....headset died..sony discontinued. any others work? tnx |
Answer: | It came with a remote when I bought it last year. |
Question: | Are you able to just hear out of one ear or both ears on the headphones |
Answer: | no it doesnt |
Product description
Single Channel Wireless Fold-Flat Headphones. The Movies2Go single channel wireless fold-flat headphones are the perfect if you looking to replace a broken or lost pair of wireless headphones.
- Auto shut-off
- Batteries included
- Single channel wireless design
- Folds for storage
User questions & answers
Question: | How do I sync these headphones to my car |
Answer: | No Internet connection needed! |
Question: | Do these work with other devices besides dvd, like an iphone or tv |
Answer: | its rated e for everyone, so any age over 5 should be ok as long as they can use a computer, thanks |
Question: | I got an audiovox headphone with my DVD on Toyota sienna 2017 model..will this work in it..How to be sure and how to find the current headphone model |
Answer: | The box lists the operating systems as Windows 95/98 |
Question: | Will these work for a 2004 Ford Expedition |
Answer: | Yes |
Product description
Connects an audio/video source to your TV, HDTV or A/V receiver with ease. It's durable and flexible for prolonged use. And set up is easy, just plug it in and you're ready to go.
- Connect your audio/video source to any TV, HDTV or A/V receiver
- Quad Shield makes this a durable and long-lasting cable
- Made of flexible material for tight fits
User questions & answers
Question: | Is this RG6 cable |
Answer: | I don't know. It all depends on how long the shaft is. |
Question: | Will this cable work with friction fit connectors |
Answer: | It fit mine is all i can say . |
Question: | Can you tell me if this is for outdoor use and is weatherproof, can't see anything on specs about it |
Answer: | The mesh material is galvanized steel, however stainless steel can be ordered as a custom item. If interested, please contact your local Leviton representative for more information. |
Question: | What is the Impedance |
Answer: | Yes is grips the cable wrap layer |
Question: | Does it work for the aps2k4saw |
Answer: | It does not. It is a wire basket on other end. Purpose is to protect cord. It is not possible to attach to anything else |
Question: | Is this remote computable with aps2k4sbcf |
Answer: | It works great with Samsung Smartthings Hub and should work with Wink. It supports Z-Wave and Z-Wave Plus. |
Question: | Will this work for aps686t |
Answer: | The BZ15S-1BZ Decora switch (specifically) has a green LED on the bottom that illuminates when the switch is in the off position. |
Question: | this is the only info i got bought car with out remote will this control work ...DOC/MDC: 342 K1059 FCC ID: ELV55AAL736R |
Answer: | Indeed, wire leads are provided on the DZ15S and DZ6HD, whereas terminal screws are available on the DZ1KD. Technical support is available via e-mail ([email protected]), phone support (800-824-3005) and live chat via Leviton.com. We look forward to hearing from you.David KellerLevitonSenior Director, e-Business |
Latest Reviews
View all
Dewalt Drill And Driver Set
- Updated: 31.03.2021
- Read reviews

Red Wine Glass
- Updated: 01.03.2021
- Read reviews

No Bark Collar Large Dogs
- Updated: 23.07.2021
- Read reviews

String Instruments
- Updated: 10.07.2021
- Read reviews

Exercise On Trampoline
- Updated: 19.05.2021
- Read reviews