12 best stereo patch cables
Stereo patch cables, also known as stereo jack cables or audio cables, are essential components in audio equipment setups. They are used to transmit audio signals between various audio devices, such as instruments, amplifiers, mixers, and speakers. Here's what you need to know about stereo patch cables:
Stereo vs. Mono: Stereo patch cables are designed to carry two separate audio channels, typically a left channel (L) and a right channel (R). This is in contrast to mono cables, which carry a single audio channel. Stereo cables are often identified by the presence of two or more conductors within the cable, allowing for the transmission of both left and right audio signals.
Connector Types: Stereo patch cables typically feature 1/4-inch (6.35mm) or 3.5mm connectors. The choice of connector type depends on the devices you are connecting. The larger 1/4-inch connectors are commonly used in professional audio equipment, while the smaller 3.5mm connectors are more commonly found in consumer electronics like headphones, smartphones, and portable audio players.
Cable Length: Stereo patch cables come in various lengths, ranging from a few inches to several feet or meters. The appropriate cable length depends on the distance between your audio source and destination. It's important to choose a cable length that suits your setup without excess slack.
Shielding: High-quality stereo patch cables often feature shielding to protect against interference and noise. Shielding helps prevent electromagnetic interference (EMI) and radio frequency interference (RFI) from affecting the audio signal quality. Look for cables with braided shielding or foil shielding for better performance.
Durability: The build quality of stereo patch cables is crucial, especially for professional use or in situations where cables may be subjected to frequent movement or wear. Cables with sturdy connectors, reinforced strain relief, and durable jacket materials are more likely to withstand the rigors of regular use.
Compatibility: Ensure that the stereo patch cables you select are compatible with the audio equipment you plan to connect. Different devices may require different connector types or adapters, so it's important to check compatibility beforehand.
Use Cases: Stereo patch cables are used in various audio applications, such as connecting musical instruments to amplifiers, linking audio mixers to powered speakers, or even connecting headphones to audio sources. They are a fundamental part of any audio setup, whether for professional audio production or casual listening.
Color Coding: Some stereo patch cables come with color-coded connectors (e.g., red for right channel and white for left channel) to help users easily distinguish between the two channels.This can be particularly helpful when connecting devices in a stereo setup.
In summary, stereo patch cables are essential components in the world of audio equipment, allowing for the transmission of stereo audio signals between various devices. Consider factors like connector type, cable length, shielding, durability, and compatibility when choosing the right stereo patch cable for your audio setup.
Below you can find our editor's choice of the best stereo patch cables on the market
Hosa CPP-202 Dual 1/4" TS to Dual 1/4" TS Stereo Interconnect Cable, 2 Meters
HOSA
Product description
Hosa cable CPP202 dual 1/4 inch to dual 1/4 inch cable - 6.5 foot.
From the Manufacturer
- This cable is designed to interconnect gear with stereo unbalanced phone jacks. It is ideal for use in a variety of professional and consumer applications
- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-free Copper (OFC) Conductors for Enhanced signal clarity
- Ofc Spiral shields for effective EMI and RFI Rejection and Flexibility
- Connectors): dual 1/4 in TS to same. Length: 2M
- Color coded to prevent cable assignment errors
User questions & answers
| Question: | I'm trying to hook my m audio studiophile monitors to a ur-22 interface. are these the cables i need |
| Answer: | I am using them on my m audio bx8a too my focusrite 2i2 interface |
| Question: | Are these cables good for converting stereo monitors to mono |
| Answer: | It's tough to say for sure without knowing the specific equipment you are using but if you are hooking stereo monitors (1/4" plug) to a single stereo 1/4" plug.... try thishttp://www.amazon.com/Hosa-Cable-STP203-Dual-Insert/dp/B000068O1P/ref=sr_1_9?ie=UTF8&qid=1446101525&sr=8-9&keywords=hosa+1+4+stereo+to+monoIf you need a true mono "Y' cable check this out (this is overpriced in my opinion)http://www.amazon.com/HOSA-TECHNOLOGY-CYP-105-Cable-Dual/dp/B00J8D6XVA/ref=sr_1_38?ie=UTF8&qid=1446101665&sr=8-38&keywords=hosa+mono+y+1%2F4I hope this helps.... |
| Question: | Are these as good as XLR plugs/cables |
| Answer: | Not really. But it depends on your needs. I think most pro engineers will go for XLR. More solid connection and an extra conductor (3 wires inside.) But to plug a guitar into an amp, you can use these. The price is right, and they are dependable, in my experience. (you have to treat them with respect...don't pull on them or yank them, or suspend stomp boxes from them, know what I mean?) Hosa is good, for a budget cable. You get what you pay for, but these are worth a try. Not for microphones though - that's when you almost always need XLR. Conner's answer is accurate, and better than this one. |
| Question: | If I buy this item i will get a cable for my left monitor and one for my right monitor right? Or is it just one cable |
| Answer: | Yo G., This is a Pair of 1/4" TS (Tip/Sleeve) Mono cables. The two wires have separate jackets and insulation, they are merely conjoined. It is simple to pull them apart to connect 2 devices, in your case, speakers. If you have a mixer, or some device sporting a Left and Right output, these could be used to run both channels.Just be sure of your length before ordering, and be aware that plenty of studio monitors utilize Balanced (Tip/Ring/Sleeve) inputs.Unbalanced (TS) cables will work. |
Product features
Hosa CPP-202
This cable is designed to interconnect gear with stereo unbalanced phone jacks. It is ideal for use in a variety of professional and consumer applications.
Hosa Technology, Inc. is the top choice for premium cables, adaptors, and other audio and video accessories. As one of the leading suppliers of analog and digital connectivity solutions to the musical instrument, broadcast, theater, and professional audio/video industries, our products are manufactured to meet or exceed the demands of today’s professional.
Promise of Quality
We are committed to providing high quality products that meet or exceed our customers’ expectations through unparalleled value, industry leading customer service, and continual improvement of our business processes.
Mission
At Hosa, we are passionate about providing solutions to fulfill our customers’ needs through excellent service and superior value.
History
Founded in 1984, Hosa Technology established itself by bringing to the industry something it sorely needed: adaptors, many adaptors. As we turn to the future, Hosa stands firm on the promise to serve you, the customer.
About Hosa Technology
Headquartered in Buena Park, CA, Hosa Technology, Inc. is one of the leading suppliers of analog and digital connectivity solutions to the musical instrument and professional audio industries. Since the company’s inception in 1984, Hosa Technology’s consumer-driven inventory has expanded to include a full line of audio, video, and computer products. Enthusiasts and professionals alike rely upon Hosa Technology to deliver world-class performance and value both on the stage and in the studio.
Hosa CSS-830 1/4" TRS to Same Balanced Patch Cables, 1 Foot
HOSA
Product description
The Hosa css-8 cables are designed to interconnect Pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays.
- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-free copper (OFC) Conductors for Enhanced signal clarity
- Ofc Spiral shields for effective EMI and RFI Rejection and Flexibility
User questions & answers
| Question: | The photo is showing unbalance cables |
| Answer: | I got the 3 foot version and it is balanced. I also noticed that the picture shows properly for the 3 foot, but not for the 1 foot. I am not able to say about the 1 foot. |
Product features
Hosa CSS-830
These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays.
Hosa Technology, Inc. is the top choice for premium cables, adaptors, and other audio and video accessories. As the leading supplier of analog and digital connectivity solutions to the musical instrument, broadcast, theater, and professional audio/video industries, our products are manufactured to meet or exceed the demands of today’s professional.
Promise of Quality
We are committed to providing high quality products that meet or exceed our customers’ expectations through unparalleled value, industry leading customer service, and continual improvement of our business processes.
Mission
At Hosa, we are passionate about providing solutions to fulfill our customers’ needs through excellent service and superior value.
History
Founded in 1984, Hosa Technology established itself by bringing to the industry something it sorely needed: adaptors, many adaptors. As we turn to the future, Hosa stands firm on the promise to serve you, the customer.
About Hosa Technology
Headquartered in Buena Park, CA, Hosa Technology, Inc. is the leading supplier of analog and digital connectivity solutions to the musical instrument and professional audio industries. Since the company’s inception in 1984, Hosa Technology’s consumer-driven inventory has expanded to include a full line of audio, video, and computer products. Enthusiasts and professionals alike rely upon Hosa Technology to deliver world-class performance and value both on the stage and in the studio.
Monoprice Premier Series 1/4 Inch (TRS) Guitar Pedal Patch Cable Cord - 8 Inch - Black with Right Angle Connectors
Monoprice
Product description
Connect your musical instruments and effects processors with this Premium 1/4" TRS Patch Cable with 90-degree connectors from Monoprice! This cable features 90-degree TRS/Stereo plugs on each end. It use s 16 AWG stranded pure copper conductors and employs copper braid shielding with 97. 5% coverage-Inch ensure that stray radio frequency and electromagnetic signals do not degrade the audio quality of your performance. The plugs are gold plated-Inch provide smooth corrosion-free connections as well as maximum electrical conductivity. With two separate conductors and the common shield ground this cable can be use d as an unbalanced stereo patch cable or as a balanced mono patch cable.
- Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
- 16AWG stranded, pure copper conductors with copper braid shielding providing 97.5% coverage
- Carries either a balanced mono or unbalanced stereo signal
- 90-degree 1/4" TRS male plugs at each end
- Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
User questions & answers
| Question: | Need to connect my boss fs-6 switch to my rc-3 looper's stop/memeory switch jack. it requires stereo signal. will this work |
| Answer: | Yes, a 1/4 stereo phono connection is the same plug as a TRS 1/4 balanced cable (like a three pin XLR) the moral of the story is yes. You are good to go. |
| Question: | Need to connect my boss fs-6 switch to my rc-3 looper's stop/memeory switch jack. it requires stereo signal. will this work |
| Answer: | Yes, TRS cables are used for stereo signal (you can see three separate sections, Tip Ring and Shield, in the connector while mono only uses two Tip and Shield). I can confirm this is a TRS cable and should work for your setup. |
| Question: | Will this work for 3.5mm audio ports for smartphones |
| Answer: | This is a 1/4” plug on both ends. It will not plug into a smartphone jack unless you use a 1/4” female to 3.5mm male adapter. It’s also a pretty heavy duty cable to use for a smartphone and even with an adapter, the extra weight might stress the jack and break it. 3.5mm is sometimes called 1/8” |
| Question: | Worth buying |
| Answer: | Yes, if you need an instrument cable with 2 right angle TRS plugs. They are good and it's not easy to find alternative products from other manufacturers, so if you need it, then you don't have much choice anyway. |
Anker 3.5mm Premium Auxiliary Audio Cable (4ft / 1.2m) AUX Cable for Headphones, iPods, iPhones, iPads, Home / Car Stereos and More (Black)
Anker
Product description
SoundLine
The 3.5mm Audio Cable
From ANKER, the Choice of 50 Million+ Happy Users
- Industry-Leading Technology
- Worry-Free Warranty
- 99% Positive Amazon Feedback
The Ultimate Audio Solution
Works perfectly with any 3.5mm AUX audio port. Link just about any audio device to any speaker or headphone setup.
Unbeatable Sound
Soundline’s gold plated connectors offer the best possible audio experience thanks to gold’s naturally superior conductivity.
Lasts 10X Longer
Kevlar fiber reinforcement ensures durability that surpasses all other audio cables. It resists the most extreme knocks, yanks and stretching.
Stunning Design
Perfectly proportioned plugs and connectors with a chrome finish complement the latest audio devices.
Worry-Free Warranty
At Anker, we believe in our products. That's why we back them all with an 18-month warranty and provide friendly, easy-to-reach support.
Note
Incompatible devices include:
Sony MDR-1000X
Beats Solo
Echo Dot
Lifeproof cases
iPhone 7 / 7 Plus / 8 / 8 Plus / X
The audio jack’s upper end measures 5.7mm across and 2.3mm long , please confirm compatibility with your device before purchase. If you’re unsure, please contact our customer service team.
- Universal Compatibility: Play audio from any phone, tablet, iPod, laptop or other media-playing device on your headphones, Hi-Fi or car stereo (fits standard 3.5mm aux ports).
- Superior Sound Quality: Built with the same grade materials as premium headphone brands. 24K gold-plated contacts ensure the cleanest sound experience possible.
- Incredibly Durable: With a 10,000+ bend lifespan several times longer than original audio cables, premium metal housing and four feet of durable, flexible cord, this cable really is made to last.
- Perfect Fit: Ultra slim extensions to the aux jacks enable use with pretty much any phone or tablet case (unlike standard aux cables). Please note: This cable does not fit some Beats headphones.
- What You Get: Anker Premium Auxiliary Audio Cable, our fan-favorite 18-month warranty and friendly customer service.
User questions & answers
| Question: | Are theses made in communist China |
| Answer: | Is there any other China |
| Question: | Does it fit through Anker's battery case or a Mophie |
| Answer: | I have a Samsung Galaxy S9+ with a battery pack protective case. Its about 1/2" thick all the way around. Pretty much every 3.5mm headphone cord doesn't work, the plug in's are just not long enough. I bought the extension, FosPower (5 Pack) 3.5mm Male to Female Auxiliary Stereo Audio Headphone Jack AUX Adapter. They are so good in less that a week i ordered 10 more. I give them to friends with the same problem. 1 friend had to take her case apart every time to instruct her fitness classes using her phone for the class music. I think a lot of people don't know about the extension, i recommend buying more than 1 because they are small and it is easy to misplace it because you will take it everywhere you go! You won't be sorry that you bought 5 or 10. |
| Question: | are these shielded |
| Answer: | I use them in my 2009 Pontiac G8 GT and have experienced no issues whatsoever. Cell phone plugged in and running "Waze", radar detectors running, laptop and the list goes on! The material that came with then made no mention of it. |
| Question: | How thick (mm) is the part with the Anker logo? Want to confirm this will work with my phone case. Thanks |
| Answer: | 8mm Wide for the silver part. But notice the gold part above the silver part with Anker, it's 6mm Wide x 2.5mm Depth. If your case is only 2.5mm thick, and will fit 6mm wide, you should be OK. If thicker case than 2.5mm, you would need to have 8mm opening for the cable to work good. Hope this helps! |
Product features
3.5mm Premium Auxiliary Audio Cable
A combination of incredible sound, durability and universal compatibility make this one of the real choice for those serious about audio.
Do justice to your sounds with a cable that allows your music to speak for itself.
Gold-Plated Connectors
Superior conductivity means that your music and audio is able to shine. With added corrosion resistance you can look forward to years of superb sound.
Superior Durability
Able to tolerate being bent over 10,000 times. This makes it possibly one of the strongest audio cable available.
Universal Compatibility
Works with all headphones, stereos and speakers with 3.5mm jacks.
Sleek Design
Streamlined connectors offer a finish that matches your phone, headphones and other devices perfectly. Give your audio devices one of the greatest complement.
Monoprice 109439 Premier Series 1/4 Inch (TRS) Male Right Angle to Male Right Angle 16AWG Cable Cord - 1.5 Feet- Black (Gold Plated)
Monoprice
Product description
Connect your musical instruments and effects processors with this Premium 1/4" TRS Patch Cable with 90-degree connectors from Monoprice! This cable features 90-degree TRS/Stereo plugs on each end. It use s 16 AWG stranded pure copper conductors and employs copper braid shielding with 97. 5% coverage-Inch ensure that stray radio frequency and electromagnetic signals do not degrade the audio quality of your performance. The plugs are gold plated-Inch provide smooth corrosion-free connections as well as maximum electrical conductivity. With two separate conductors and the common shield ground this cable can be use d as an unbalanced stereo patch cable or as a balanced mono patch cable.
- Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
- This cable features 90-degree TRS/Stereo plugs on each end. It uses 16 AWG stranded, pure copper conductors and employs copper braid shielding with 97.5% coverage
- The plugs are gold plated to provide smooth, corrosion-free connections as well as maximum electrical conductivity.
- With two separate conductors and the common shield ground, this cable can be used as an unbalanced stereo patch cable or as a balanced mono patch cable.
- Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
User questions & answers
| Question: | Are these trs connectors , "tip to wiper" configuration |
| Answer: | yes...mono only has one ring around the shaft trs has 2. Think of it as stereo=2 mono=1 |
| Question: | Can i connect my phone directly to this other input? my xlr input cord is having some sound problem but the bass seems to be fine. will appreciate a |
| Answer: | No, your phone will be a 3.5mm connection, you would need an adapter to connect to a 1/4" connection |
| Question: | can I use this to connect my zoom h4n to my dlsr, I have a similar male in to in cable, however when I connect it to my zoom h4n it doesn't work |
| Answer: | Nope. You’ll need an 1/8” microphone attenuator cable for that. I do the exact same thing and use this: https://www.amazon.com/dp/B073HR6SY4/ref=cm_sw_r_cp_api_i_6nYTCbGP3F7FR More expensive but worth it. I also record the audio into the recorder as a fail safe. |
| Question: | How long is this exactly? The product description says 1.5 ft (18 inches), but under the product information is says 13.2 inches. Which is correct |
| Answer: | This unit is 18 inches tip to tip |
Product features
Monoprice Premier Series 1/4 Inch (TRS) Male Right Angle to Male Right Angle 16AWG Cable Cord - 1.5 Feet- Black (Gold Plated)
Connect sound components and other audio equipment with this Premium 1/4" TRS Patch Cable with 90-degree connectors from Monoprice. This cable features 90-degree TRS/Stereo plugs on each end. It uses 16 AWG stranded, pure copper conductors and employs copper braid shielding with 97.5% coverage to ensure that stray radio frequency and electromagnetic signals do not degrade the audio quality of your performance. The plugs are gold plated to provide smooth, corrosion-free connections as well as maximum electrical conductivity.
With two separate conductors and the common shield ground, this cable can be used as an unbalanced stereo patch cable or as a balanced mono patch cable.
TISINO 1/4 inch TRS Stereo to Dual 1/4 inch TS Mono Insert Cable Y-Splitter Stereo Breakout Cable Patch Cord - 10 feet
DEXINUO
- This is an insert cable, generally used for audio consoles or other preamps that have a send/return on the tip/ring of a 1/4" TRS jack. It's a way to insert a component (like a compressor, EQ, etc.) directly inline with a preamp by using a single 1/4" jack.
- This "Insert" cable intended primarily for mixing/effects insertion applications, but it also can be used as a "Stereo Breakout Cable" since it is wired exactly the same way as a stereo breakout cable.This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals, or to combine two mono signals into a single stereo signal.
- The 1/4 TS connectors are color coded Black(Left/Send) and Red(Right/Return), It splits closer to the 1/4 TS ends, the distance to the split point is about 7.5 inches. Please make sure the power for all your equipmant is "OFF" when changing connections.
- 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping.
- Heavy Duty Gold-plated 6.35mm connector resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.
User questions & answers
| Question: | x12 cabinet with 2-4ohm stereo inputs , amp has only 1-4ohm mono output, will this splitter work without damage to the amp |
| Answer: | Don't do it. You need to use a speaker cable for a connection between a guitar amp and speaker cabinet, otherwise yes you can cause damage. |
| Question: | Would this connect the L/R outputs of a synth to a single input on an audio interface |
| Answer: | Yes, as long as the audio interface has a stereo input jack. You see that one end has 3 rings ... that means it's connecting a Left channel/Right channel/Ground connections all in one male 1/4" jack. |
| Question: | with this I'm able to line out my guitar amp into 2 channels on my mixer? correct |
| Answer: | yes, usually the headphone output on whatever to individual inputs in a mixer, just be careful about the boost in signal |
| Question: | Would this work for connecting a single footswitch output jack to separate reverb and gain jacks on the back of my amp |
| Answer: | Unless your footswitch output jack can pick up both sides of a stereo plug, you would be better off getting a Y cable that has mono plugs at all three ends. |
Product features
TISINO 1/4 TRS to Dual 1/4 TS Y-Cable
These Insert cables are used for creating a real-time effects loop by connecting a channel insert on an audio mixing board to an external effects processor with 1/4" unbalanced connections. Connect the TRS plug into the "insert" jack of your mixing board. The tip of the jack is a send (sending a mono signal to an external effects professor) and the ring is the return (returning a mono signal from the external effects processor back into the mixing board). This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals or to combine two mono signals into a single stereo signal.
Insert Cable & Stereo Breakout Cable
This "Insert" cable intended primarily for mixing/effects insertion applications, but it also can be used as a "Stereo Breakout Cable"; Compatible with nearly all preamps, amplifiers, and other devices equipped with a 1/4" TRS effects loop jack. Premium metallic housing which makes it easily survive everyday usage and gives it a more stylish and elegant appearance that goes great with your expensive devices.
Incredibly Durable and High Performance
Soft TPE outer coating gives the cord a flexible performance and a resistance of pressure. Freely use this cord without any worry of damaging it due to bending(With a 15000+ bend lifespan)
24K Gold-Plated Connectors
With gold plated connectors, it could resist optimal signal transfer.
Y-Splitter
It splits closer to the 1/4 TS ends, the distance to the split point is about 9.5 inches.
GLS Audio 1/4" Plugs for Patch Cables, Balanced Cables, Snakes - TRS Male Stereo 1/4 Inch Phono 6.3mm Phone Plug Bulk - 20 Pack
Product description
We are offering these new Professional Series Heavy Duty 1/4" Stereo TRS (Tip / Ring / Sleeve) Plugs by GLS Audio. They are full metal construction and you will notice that they have a high quality Fiberglass Insulator (not the cheap plastic insulators).
- TRS Stereo application
- Fiberglass insulator ring
- Textured No-Slip barrel
- All Metal Construction
- Full GLS Audio Guarantee
User questions & answers
| Question: | How do I know what is the tip and what is the ring |
| Answer: | Tip Ring Sleeve or TRS means that these are stereo plugs not mono. I have purchased these exact plugs and they are TRS stereo plugs. |
| Question: | Can I wire this for a Speaker cable which only has 2 wires? If so which wire goes where |
| Answer: | Hello Holly, This should work perfectly for a nursery! If you have any other questions please feel free to contact us via email at [email protected] |
| Question: | Are these solder yourself, three conductor |
| Answer: | Try taking the batteries out and then put them back in again. If that doesn’t work, try putting new batteries. My trash can is working wonderfully so, this is only a suggestion. |
| Question: | These are listed as mono so with the tip ring and sleeve that must mean it's a balanced plug |
| Answer: | Hello, We appreciate your interest in our unit. Our DZT-12-5GD's dimensions are approximately 11x8x14 inches (lenght x width x height). If you have any further questions or concerns, feel free to contact our customer service department at (909)620-8877 and one of our agents would be happy to assist. Our business hours are Monday through Friday 9 am to 5:30 pm Pacific time. Have a nice day! |
3.5mm TRS Male Camera Patch Cable, 1/8 Right Angle Microphone Cable Cord Compatible Rode SC2 Cable, Rode Wireless Go Cable
Ancable Electronics
- Patch Cable:This cable replace Rode SC2 3.5 TRS Patch Cable. It's designed for BOYA, RODE VideoMicro, VideoMic Go connect with Canon Nikon DSLR SLR camera Zoom H1 / H6 handy recorder.Great with Youtube Vlogging Facebook Livestream.
- Camera mic cable is well constructed and offers an unparalleled sound to you. The professional Aux Male to Male Lead features silver-plating copper conductors, 24K gold-plated connectors and double shieldings(aluminum foil plus nylon braid) to provide maximum conductivity and transfer high purity audio signal with minimum loss. Perfect for for interviews, recording Vlog and Youtube videos.
- The soft-wound coil PVE sheath makes the lead wire of the microphone jack of the camera firm and stretchable, which can extend the service life and meet the longer length requirements. The reliable double-layer shielding protects the audio from interference during transmission and provides noise-free and ultra-clear sound quality.
- 100% guaranteed! All Ancable products have a 12-month warranty, and we will provide you with 100% unconditional guaranteed replacement or refund protection. We only care about providing high-quality products that meet your needs.
Planet Waves 1/8 Inch Stereo Audio Patch Cable, 3 feet
D'Addario Accessories
Product description
The planet waves 1/8 inches stereo cable is a premium quality cable with 100% oxygen free copper, gold plated connectors and 100% shielding coverage to keep out unwanted interference. as with all planet waves cables, it comes with a limited lifetime warranty.
From the Manufacturer
The Planet Waves MC-03 1/8 Inch to 1/8 Inch stereo cable is ideal for connecting your portable mp3 device to a car stereo, speaker, or line-out device. A must have accessory for iPod, iPhone, or iPad owners!
Planet Waves Custom Series cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Encapsulated and impenetrable soldering points with double-molded strain relief provide maximum durability and worry-free reliability. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.
Planet Waves cables are the ultimate musician's cable. Utilizing exclusive In=Out Technology for pure signal reproduction, Planet Waves cables are built tough to withstand gigs and come with a limited lifetime guarantee. Planet Waves is a part of the D'Addario and Co. family of brands, the global leader in musical accessories.
- 1/8 Inch to 1/8 Inch stereo cable
- In=Out Technology: Low capacitance for pure signal transparency
- Two layers of shielding provide noise rejection for quiet operation
- A must have accessory for portable mp3, iPod, iPhone, or iPad owners
- Limited lifetime guarantee
User questions & answers
| Question: | Is this a single cable or dual cable to single plug, like in the picture |
| Answer: | Yes, unless your amp Is passive, then you should connect the speakers through the back, normally speakers don't need an amp to power if they need 3.5mm jack to power, if the speakers/monitors are active (aka, have their own plugs and inside amplifier) then you do not need the amp to power them, as long as this wire is used you can plug strait into laptop/computet/phone anything with a 3.5mm jack |
LinkinPerk 6.35mm (1/4) TRS to 6.35mm (1/4) TRS Stereo Audio Cable Male to Male (10ft / 3M)
LinkinPerk
Product description
Gold Plated Premium 6.35mm Jack 1/4" TRS Cable, This patch cable features a TRS 1/4" connector design. It is ideally used to connect pro audio and DJ equipment such as studio monitors, mixers, amplifiers and similar devices.
-This cables feature high-quality metal 1/4" TRS connectors which provide a balanced line to be connected to mixers, amps, and other pro audio equipment with a noise-free signal.
Specification
1. Connectors: 6.35mm 1/4" Male x2;
2. Low noise resistance, for superior performance, perfect for digital or analogue signals;
3 24K 15U Gold plated connectors resist corrosion and ensure optimum sound quality;
4. Oxygen-free copper provide maximum's conductivity and durability;
5. Zinc alloy case and double layer nylon braid guards against harsh installs where the cable is tugged across sharp edges, protecting it from being scathed.
Package Contents
ANNNWZZD Gold Plated Premium 6.35mm Jack 1/4" TRS Cable x1
- Professional Series Stereo Plugs，Gold Plated Premium 6.35mm Jack 1/4" TRS Cable, This patch cable features a TRS 1/4" connector design. It is ideally used to connect pro audio and DJ equipment such as studio monitors, mixers, amplifiers and similar devices.
- 24K 15U Gold plated connectors resist corrosion and ensure optimum sound quality;Low noise resistance, for superior performance, perfect for digital or analogue signals;
- Oxygen-free copper provide maximum's conductivity and durability;Zinc alloy case and double layer nylon braid guards against harsh installs where the cable is tugged across sharp edges, protecting it from being scathed
- If there is any dissatisfaction in the merchandise, please do not hesitate to contact us through "Order History → Contact Seller" in the account service. We will respond within 24 hours of the working day.
User questions & answers
| Question: | What awg |
| Answer: | DMX is either 3 or 5 pin. This Hosa unit has both sockets, so it will work. |
| Question: | Do they come in pairs |
| Answer: | Negative. |
1/4 inch Cable 6FT, CableCreation 6.35mm to 6.35mm TRS Guitar Patch Cords/Instrument Cable for Keyboard, Amplifier, Guitar, Mixing Board, Pedalboards, Piano and More, 1.8M
CableCreation
- ❤ [6FT Stereo 1/4 Cable ]: Professional Series Stereo Plugs, connect instruments such as synths, keyboards, Guitars, Amplifier, Mixing Board, Pedalboards, Piano, Behringer, Studio, Live Presentation, Yamaha Hs8, Boss Katana amp footswitch, DJ mixer, UHF Receiver, Rokit 5 Studio Monitors and other professional audio equipment.
- ❤ [Outstanding Sound Quality]: Oxygen-free copper provide maximum's conductivity and durability; Zinc alloy case ensure the Minimal signal loss.
- ❤ [Lightweigt & Tangle Free]: CableCreation guitar cord 6FT is made up of a durable PVC outer layer, flexible and durable for long usage.
- ❤ [Snug Fit]: 24K gold-plated heavy duty connectors fit with all of your 6.35mm devices which plug and remove easily.
- ❤ [What You Get]: CableCreation 1 pack x Guitar patch cable 6ft with 2 years of warranty and lifetime friendly customer services.
User questions & answers
| Question: | Can i use this to connect my behringer powered speakers to my behringer 12 xenyx 1202fx 3 pin xlr mixer |
| Answer: | Dear Customer, Yes, you can use the 1/4'' TRS cable to connect the behringer powered speakers to mixer. Make sure that your devices have 6.35mm audio jack. Any further question, please feel free to contact us. Thanks! |
| Question: | will this connect my foot switch to my amp? told it needs stereo cable |
| Answer: | Yes this is a stereo cable. I use it to go from my Saffire pro 40 to my headphone mixer. Regular 1/4” guitar cable only gave me sound out of one channel. With this cable I get stereo and it works wonderfully! Surprisingly high quality, too. |
| Question: | Will this work to connect two PA's together |
| Answer: | I would say if it was a 1/4" mono |
| Question: | Will this work with a Kustom pa50 speaker |
| Answer: | NO,This item can't work with a Kustom pa50 speaker.We have the other can work.This is the seller product for your reference, https://www.amazon.com/CableCreation-3-5mm-Stereo-Cable-Black/dp/B01JY2FSII/ref=sr_1_1?s=electronics&ie=UTF8&qid=1504063790&sr=1-1&keywords=cx0059 |
Product features
24K Gold-plated Connectors
24K Gold-plated Connectors & Aluminium Alloy Shell ensure you get reliable and crisp sound. It seamlessly transmits stereo audio for high quality sound.
Double Shielded
Pure copper conductor: Provides the superior electrical conductivity.
Double Shielded: Foil shielded and metal braided shield make the sound quality undisturbed by external signals
Flexible PVC Jacket
Covered with soft PVC jacket which effectively prevent wire knotting
DISINO Dual 1/4 inch TS to Dual RCA Stereo Audio Interconnect Cable Patch Cable Cords -9.8 ft
Product description
DISINO Dual 1/4 TS to Dual RCA Interconnect cable
This cable is designed to connect gear with stereo unbalanced phone jacks to gear with stereo phono jacks. It is ideal for connecting pro audio gear to consumer audio components
Features:
- Heavy duty components.
- High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility.
- Durable and flexible PVC outer sleeve.
- Cotton Yarn Wrap to reduce noise .
- Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect.
- Gold Plated Reinforced Male 1/4" Plug Delivers Preimum Quality Sound with Minnimal Interferance.
- Low-Loss 98.5% Copper Braided Spiral-Wound Shield provides maximum cancellation of hum and noise.
- Free velcro cable wrap included.
- This full-featured cable has a soft PVC jacket for easy use and storage.
- 4N Oxygen-free copper conductors are encased in bare copper braid shielding to provide pure sound that is noise free.
Cable Specifications
- Connector A: 6.35mm TS Male
- Connector B: RCA Plug
- Cable Conductors: Bare Copper
- Connector Contacts: Gold-plated
- Braid Shielding: 98.5% Coverage
- Jacket Material: PVC
- Cable Gauge: 20 AWG
- Cable Body Outside Diameter: 6.0mm
- Length: 10Feet/3m
- Dual 1/4 to RCA Stereo Signal Interconnect Cable Patch Cable Cords
- This cable is designed to connect gear with stereo unbalanced phone jacks to gear with stereo phono jacks. It is Ideal for touring and live sound applications where a device with stereo unbalanced 1/4" outputs needs to be connected to a device with stereo RCA phono inputs.
- High quality Gold-plated Connector, all of the ends has Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.
- Connectors: Two 1/4 inch TS Connectors on one end, Two RCA Male Connectors on the other end. Dual Cable are stuck together to run parallel, easy to organize, and you can separate the cable to make two independent cables if you need them without any problems.(Note:if you're input is red and white then use the blue in place of the white)
- Heavy Duty Flexible Rubber Jacket , Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.
User questions & answers
| Question: | How hard would it be to rework the 1/4" to a right angle plug on this cable |
| Answer: | You can use two 1/4 inch TS right angle adapters to do what you want. I don’t like to modify anything like this used in a sound system, even power cables; because it increases the possibilities for failure that have to be considered when something goes wrong. |
| Question: | Does it work on 2 laptops into mixer |
| Answer: | Does your laptops have RCA output? I've never seen a laptop with RCA output! Most likely your computer has Mini 3.5mm (headphone) output... so to answer your question, it's no! I advise you to not use this cable to connect with your laptop. If you did, you would have to convert the RCA end with a female mini 3.5mm connections (which doesn't make sense to do). What you should be looking for is mini 3.5mm to Quarter inch cable or 3.5mm to RCA cable. It's whichever type of input your mixer has which will determine to get either the Quarter Inch vs RCA. |
| Question: | Will this work for a PreAmp with rca output into a power amp with 1/4 plug input? Unbalanced balanced plugs |
| Answer: | yes it will work for your preamp and as for the cables they are un balanced but it should not be a problem as they aren’t that long and very well made. they sound very good. |
| Question: | What is the difference between TS and tsr |
| Answer: | TS stands for tip-sleeve and TRS stands for tip-ring-sleeve. The TS cables will carry a mono signal, where the TRS cables can carry a stereo signal. It took me about 10 minutes to find that answer using a popular search engine. |
Latest Reviews
View all
Ham Radio Transceivers
- Updated: 21.05.2023
- Read reviews
Hair Regrowth Oils
- Updated: 01.07.2023
- Read reviews
Prophy Angles
- Updated: 20.07.2023
- Read reviews
Collins Telescopes
- Updated: 22.05.2023
- Read reviews
Men Swim Goggles
- Updated: 01.05.2023
- Read reviews