11 best speaker cable with bananas

Product description

Banana plugs make speaker installation a breeze. They are designed for use with amplifiers or speakers that use traditional binding posts. Not only is it easier to make the connection on the back of your amp, it is safer, with no chance of stray wire strands creating a short across contacts. These high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification. The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections. This multi-pack includes five pairs of plugs, perfect for connecting the satellite and center channel speakers in a 5. 1 channel setup.

• Can accept bare wire or spades. Can accept 12 to 18 AWG speaker wires.
• Color coded Black/red rings for maintaining proper polarity
• Secure, positive contact with binding posts
• Corrosion resistant, 24K Gold plated brass plug
• Each order includes five pairs (10 plugs total)

User questions & answers

Question:	im trying to make my own test leads for different applications, will these work/fit with a voltmeter
Answer:	Depends. It should fit as the multimeters use standard banana plug socket innerds, but for years commercial test leads have no longer used bare plugs because of the hazards associated with accidental contact which would be shockingly dangerous if working with high voltage (yes, these meters are routinely used in high voltage electrical applications - my meter carries a CAT III rating for use with 1000V, CAT IV for 600 V). BUT, I mainly use my meter on ham radio stuff and sometimes on cars - all low voltage DC applications.I just ordered these to make a current (amperage) test rig with Anderson Power Pole sockets. Again, I stress that I am working with voltage running significantly less than 30V (sometimes 24 V systems in aviation or other automotive systems), but I will wrap the plug bodies in heat shrink insulation to minimize likelihood of contact.
Question:	I've read that these plugs can accept 12-18 AWG wire; however, I'd like to know what you all have used/what is working best
Answer:	I use 12 gauge on my fronts and 14 on my surrounds with no issues. The 12 gauge was a little difficult to get wrapped back around and then screw down, but I really don't know of any banana plug that would we easier, without going to the kind where they use a screw to fasten. This is the easier, cleaner look in my opinion!
Question:	The description says: "Can accept bare wire and spades. " How do you connect spades
Answer:	As PCKIDZ replied, this is a two function connector.The banana plugs are pushed into the hole in the end.If you unscrew the barrel which is knurled, the smaller shaft is exposed, where you can slip on your spade lug and then tighten the knurled shaft to secure the lug.
Question:	whats the differance between open screw and closed screw banna plugs
Answer:	"Open Screw" type plug (side wire) allows for daisy chaining or stacking additional banana plugs to the back. This is desirable in DJ applications if you're running a speakers in parallel and if your amp can handle the low impedances. Closed Screw type has the wire at the back.

Product features

Brass Body Construction

The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections.

Color Coded Black/Red Rings For Maintaining Proper Polarity

Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.

Can Accept 12 To 18 AWG Speaker Wires

These high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG.

Product description

NOTE 1: This listing is for one pair of speaker wires, for connecting a pair of stereo speakers.

NOTE 2: This speaker wire is built with banana plugs for use with binding posts. Consult your speaker and amplifier manual to check compatibility.



Take the guesswork out of connecting speakers to amplifiers with the Micca Media Series speaker wire. Like other well reviewed Micca Media Series audio and video products, Micca takes the no-nonsense approach to building a high quality yet affordable speaker wire. Using carefully selected materials and construction methods, every aspect of its design is geared towards delivering superior audio performance and durability. No fancy gimmicks or voodoo magic - just a great cable at a great price.



Ultra High Strand Count Pure Copper - The Micca 14AWG speaker wire has two conductors, each with 245 pure copper strands. Compared to copper-clad-aluminum wire, pure copper wire has 30% lower resistance, better flexibility, and greater durability.



Gold Plated Banana Plugs - All metal banana plugs with nine contoured contact springs, purpose-made for high current and low loss applications. Standard 15mm length fits both deep and shallow binding posts securely.



Meticulous Craftsmanship - Each cable is hand assembled using soldered joints and heat shrink tubing. This construction method is not only durable, but also eliminates needless bulk for a clean and uncluttered installation that reduces the chance of accidental shorting.



Double Layer Jacket - Durable inner layer and a supple outer jacket provides excellent protection against abrasion while maintaining flexibility. Red polarity stripe together with color-coded connectors helps prevent connection mistakes.



Simple Packaging - Media Series speaker wire is shipped in a zip-top plastic bag. It's simple, easy to open, reusable, and lowers your cost.

• Premium pure copper speaker wire with 245 fine strands for excellent conductivity
• Gold plated banana plug with soldered assembly ensures a secure connection that won't come loose.
• Slim connector profile and construction allows easy application in tight spaces.
• Double concentric wire jacket design provides ample protection while maintaining excellent flexiblity.

User questions & answers

Question:	I don't know much about cables to speakers, but do these work well with the sony ss-cs5 speakers
Answer:	The 2709B has a 66 Megohm resistance measuring capacity in its top end ohmmeter function. Other types of megohmmeters, sometimes known as "Meggers" include the ability to put high levels of DC stress voltages (500V, 1000V, etc) on the load (such as large transformers, inductors, Power Factor Capacitors, etc.) while also indicating resistance in Megohms. Clearly, the 2709B, while being able to measure simple resistances, cannot substitute for these. The 2709B only has a 9V battery inside, and is not intended to generate the high DC stress voltages that a "Megger" can. That said, it is still a wonderful instrument for its intended purpose. "Meggers" are a highly industrial instrument usually used in High Power Distribution systems, a different world entirely than that of Low Voltage Electronics Troubleshooting.
Question:	Will this become prime shipping anytime soon
Answer:	Yes. For the lower current fuse, which is the one you most likely may need to replace, search for a: F 500 mA 500V ceramic 6.3 x 32 mm (6 x 32 mm) fuse. The 'F' stands for fast blowing ('flink') and the 'ceramic' indicates it has a ceramic body that will not grenade under extreme overload. In a pinch you can use an 'FF' ceramic fuse, where FF stands for very fast blowing ('flink flink'). Over time, however, an FF fuse may blow at high currents when it does not need to. I have tripled checked the fuse data against what is printed on the meter and against the spare fuses packed with two different meters, made roughly a year apart.
Question:	Are the banana plugs able to be remove from one side if necessary
Answer:	It should be. The "Auto Power Off" section on page 9 of my manual explains how. Basically, you press and hold any button but HOLD, and then turn on the meter.
Question:	How many cables in total
Answer:	It depends on what you are measuring. Capacitance can be less frequent. Otherwise, the meter sends a measurement anywhere from roughly once per second (for frequency) to three times per second (for continuity) – to the USB port. The meter can stop transmitting if it is frantically auto-ranging; otherwise, if the meter shows a value, it will send it. In case you are curious, I project a fresh alkaline battery should be good for 300–350 hours of measurements. I discovered a tolerable few things about the 390A, while writing a Python utility to log its values under OSX, Windows and Linux. It is a nice meter.

Product description

GearIT Premium Braided Speaker Wire with Banana Plug combines great looks and durability with exceptional performance, making it the ideal speaker wire solution for the serious audiophile. The 12 AWG copper conductors have been tinned to prevent corrosion and the braided fabric outer jacket not only helps prevent damage to the jacket, but also won't scratch your speaker cabinets. Each wire is pre-terminated with color-coded, gold plated banana plugs at each end, ensuring that you can quickly and accurately connect your speakers to your amplifier. Backed by GearIT Lifetime Replacement Warranty, there is no better choice than GearIT Premium Braided Speaker Wire!

• Quick and easy installation for connecting a speaker to an A/V receiver or amplifier with banana plug style ports; Precision bolted interior banana plug terminations create a secure connection and a convenient alternative to cutting and terminating speaker wire with banana plugs *Package includes 1 cable*
• Maintain Best Audio and crisp clear sound with this dual conductor 12 AWG oxygen-free pure copper (OFC), color coding banana plug to enable matching polarity, high strand count wires in a no-slip PVC Y-Boot and a durable braided jacket
• High-end look with braided jacket wrapped around speaker wire, giving them extra protection to your speakers' finish allowing Pro-grade sound quality yet retaining the flexibility of ordinary speaker wire
• Professional Look packed with professional grade features, such as color-coded, brushed aluminum connectors, gold plated banana plugs, and braided fabric jacket, get the appearance of a professional installation without the cost and hassle
• Audiophile Equipment compatible with popular home theater equipment such as KEF LS50 Mini Monitor, Marantz PM-8005 Integrated Amplifier, Micca MB42X Bookshelf Speakers, Onkyo TX-8050 Network Stereo Receiver, Pioneer Andrew Jones Designed Center Channel Speaker / Bookshelf Loudspeakers / Floor standing Loudspeaker / Add-on Speakers for Dolby Atmos / Watt Powered Subwoofer, Polk Audio PSW505 12-Inch Powered Subwoofer, SMSL Class D Amplifier + Power Adapter and more!

User questions & answers

Question:	awg vs 14awg, what's the difference
Answer:	12awg is a heavier gauge. Works better.
Question:	What is the Strand count of the copper wire per conductor
Answer:	There is 240 strand counts per conductor.
Question:	Is this the cable for av receiver to speaker
Answer:	Yes, This cable is to connect from the av receiver to one speaker.
Question:	for a pair of speakers you need two of these
Answer:	Yes, you need 2. Please note, that while the wires seem to be well constructed, the banana plugs are not. They pull off and break after 2-3 movements of the speakers. I have had to "rebuild" these cables with higher quality banana plugs

Product features

Ultra High Performance Clear, Rich and Detailed Sound

• Quick and easy installation for connecting a speaker to an A/V receiver or amplifier
• Maintain Best Audio and crisp clear sound with this dual conductor 12 AWG oxygen-free pure copper (OFC)
• Color coding banana plug to enable matching polarity
• High strand count wires in a no-slip PVC Y-Boot and a durable braided jacket
• Brushed aluminum connectors and gold plated banana plugs

Pure Copper, Oxygen Free and Premium Banana Plugs

1. Oxygen Free Copper Conductors
2. Dual locking screws
3. Metallic caps with polarity indicator
4. 24k gold plated connector for superior signal
5. PVC protective inner jacket

OFC vs CCA

• 99.9% Oxygen Free Cable
• Pure copper conductor
• Minimize distortion
• Minimize impurities
• Minimize copper air pockets

Specifications

• 12 AWG copper conductors
• 165 strand count
• CL2 in-wall rated
• PVC Y-boot jacket
• Polarity color code
• Gold platted banana plugs

Where to use them?

• Surround sound receivers
• Speakers
• Binding post wall plates

Product description

Mediabridge™ ULTRA Series Speaker Cable



Connects & supplies a high-quality signal path from audio components like a speaker to an A/V receiver, amplifier or other sound application. With dual conductors per end (color-coded to distinguish left/right for matching polarity), this heavy-duty 12 AWG speaker cable with brass/copper banana plugs is ideal for typical & custom installs alike. Banana plugs take away the hassle of cutting/fiddling around with speaker wire. This cable is CL2 rated for in-wall. Corrosion-resistant gold-plated connectors & oxygen-free stranded copper wire provide clarity, sonic accuracy & minimal signal distortion. Each compact cable is functionally crafted to fit securely into compatible units, using little wall space & making installs easy. It maintains integrity even when bent, with a no-slip PVC Y-Boot & a durable, yet flexible cable jacket. ULTRA Series cables are made from premium materials for a pro-grade output.



Product Features

- Connects & supplies a high-quality signal path between audio components

- CL2 rated for in-wall

- Dual conductor 12 AWG, with color coding to distinguish polarity

- Brass/copper banana plugs for typical & custom installs

- Corrosion-resistant gold-plated connectors & oxygen-free stranded copper wire (high strand count) for pro-grade clarity

- No-slip PVC Y-Boot & durable, yet flexible cable jacket



Compatibility

Banana plugs are typically compatible with audio components like speakers, A/V receivers, amplifiers or other sound applications



Installation

Plug-&-play: Ready to use, once each end is connected to respective ports on a compatible unit (each end has 2 banana plugs)



Notes

Works only with audio, but can be connected to A/V applications with compatible ports.

• Soldered banana plug terminations create a secure connection with your speaker’s terminals and make this Mediabridge speaker cable the best long-term choice for your high quality speaker system. CL2 rated for in-wall applications. *Package includes 1 cable*
• Dual conductor 12 AWG, with color coding to distinguish left from right to enable matching polarity. Brass/copper banana plugs for typical and custom installs alike.
• Corrosion-resistant gold-plated connectors and oxygen-free stranded copper wire (high strand count) provide clarity, natural sonic accuracy and minimal signal distortion.
• Maintain integrity even when bent, with a no-slip PVC Y-Boot and a durable, yet flexible nylon sheath. Pro-grade quality suitable for audiophiles, without the hassle of cutting and fiddling around with your own speaker wire.
• Speaker Wire, speaker cable, banana plugs, 12AWG, 12 gauge, stereo, custom, high-end

User questions & answers

Question:	Is this one speaker cable? Or two
Answer:	This is one cable, with both + and -. Therefore you need only one cable for each speaker.
Question:	How long are the plugs themselves? Trying to figure out how far they stick out. I'm limited on space in my cabinet
Answer:	Hello, When these are inserted, the base of the plug sticks out about 1 1/3" and then the cable's bend adds another 1/4" so you need about 1 3/4" of space to comfortable fit. Thanks, Mediabridge Customer Support 856-216-8222 [email protected]
Question:	Is this speaker wire copper clad aluminum or pure copper
Answer:	Hello, These cables have pure copper speaker wire conductors. Thanks, Mediabridge Customer Support 856-216-8222 [email protected]
Question:	Will these work well with Klipsch Reference Premiere speakers or is there better ones
Answer:	These are excellent cables. I use them with studio quality bookshelf speakers paired with a Velodyne subwoofer. You can pay a lot more for something that may , or may not be a tiny bit better. I had Monster Cables before and heard no diminishment with these

Product description

Blue Jeans Cable Canare 4S11 Speaker Cable, with Welded Banana Plugs, Conventional (not Bi-wire) terminations, 10 foot



At Blue Jeans Cable, we were never happy with the conventional methods of attaching speaker cable to banana plugs. Setscrews are fine, but lack pull strength; compression connections are never as strong as they look like they're going to be; and solder, on large high-mass connectors, is slow going and tends to cause a lot of insulation meltback. Our solution: ultrasonic welding. Our Sonobond Ultrasonic Welder (made in West Chester, PA) welds the copper wire to the brass banana plug body without the excessive heat associated with conventional welding, fusing copper to brass in a tight, strong, low-resistance, reliable connection.



Conventional Configuration



This cable is made with two bananas at each end for conventional speaker hookups. If you need this cable in bi-wired configuration, we offer that, too -- search our listings here on Amazon.



Quality Parts for Quality Connection



This cable is made using Canare's popular 4S11 star-quad speaker cable stock, which contains four 14 AWG wires for an effective gauge, when conventionally wired, of 11 AWG, in a Black PVC Jacket. To this cable we weld our custom-made weldable banana plugs, designed specifically to maximize weld surface area for high weld strength. These are "locking" banana plugs -- the plug end consists of four splines, and advancing the locking collar around the connector spreads these splines, allowing you to tighten the connection once the banana is in the binding post and avoid plugs being accidentally tugged out.



Blue Jeans Cable -- Professional Cable Assembly in the USA



We assemble these cables at our shop in Seattle, Washington, where we also make a wide variety of quality video, audio and data cables for the home theater and professional markets. Browse our product listings here to see more.

• Canare 4S11 cable stock -- 4 14 AWG wires in a star-quad configuration, effective 11 AWG.
• WELDED connections -- yes, welded, not soldered -- for maximum pull strength and minimum contact resistance
• Terminated in our Seattle shop on our Sonobond Ultrasonic Welder
• Locking-type banana plugs; loosen the collar to insert or remove, advance it to secure it in the binding post
• NOTE: this is a single cable, to wire one speaker. If you need a pair, be sure to order two.

Product description

Pair of 35 Foot Pro Audio Banana to Speakon Speaker Cables. MODEL: B12SP35 (2 Pack), CONTENTS: Pair of 35 Foot, 12 Gauge Banana to Speakon Speaker Cables, CONDITION: New, APPLICATION: Connecting Pro Audio Gear, GAUGE: 12 Gauge, COLOR: Black, CONNECTORS: One end has Banana Clip connectors (Binding Post), CONNECTORS: One end has Speakon connector, CONDUCTOR TYPE: 2 Conductor, LENGTH: 35 Feet each, COVERING: Shielded PVC Wrapped, WARRANTY: One Year Warranty The Seismic Audio line of Premium Pro Audio Speaker Cables were designed with the high powered loudspeaker application in mind. These Banana to Speakon Pro Audio Speaker Cables are designed to handle more power and provide uniform signal for longer runs. These Banana to Speakon Speaker Cables are heavy duty! They are 12 gauge, 2 Conductor and are housed by a durable rubber insulated covering. Our Premium Banana to Speakon Speaker Cables are perfect for amplifiers, mains, monitors and subwoofers where a high power environment is involved. They are fitted with the highest quality banana and speakon connectors on either end and are guaranteed to last!

• MODEL: B12SP35 (2 Pack)
• CONTENTS: Pair of 35 Foot, 12 Gauge Banana to Speakon Speaker Cables
• CONDITION: New
• APPLICATION: Connecting Pro Audio Gear
• GAUGE: 12 Gauge

Product description

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with the Sewell deadbolt banana plugs. Using self crimping teeth These plugs provide a simple, secure, and low profile connection without requiring soldering or screws. These 1.6” inch plugs are extremely low profile making it so you can put your speakers or receiver closer to the wall. Unlike other banana plugs that use low quality metals like zinc alloy The Sewell deadbolt banana plugs use pure copper and high Quality brass with 24K Gold plating. Installation one of the best things about the deadbolt banana plugs is that installation is quick, secure, and requires no tools. Just follow these steps. Feed the cable through the bottom piece. Push the cable back over the teeth on the bottom piece. Screw the top piece to the bottom one. You're finished. All in all you should only need 10-20 seconds for this entire operation. What are banana plugs? Today, many electronics use the banana plug interface, also known as binding post (referring to This connection in its female form). this female binding post connection that accepts this banana plug is found commonly on virtually all audio/video receivers, speaker wall plates, and more. Banana plugs offer an alternative to inserting a bare speaker wire into the equipment. Often a bare speaker connection is not as reliable as a guaranteed banana plug connection. Wires tend to get pulled out or frizzy after time passes. Banana plugs require only one install, giving you a permanent and robust connector at the end of your speaker wire.

• 24k Gold Plating on Connector and Crimping Teeth
• Fast Lock technology makes it easy for self crimping a reliable connection.
• Heavy Duty Brass Casing for maximum durability
• Wider base minimizes shorting for maximum signal transfer.
• Maximum Wire Size 8 AWG (10 AWG suggested)

User questions & answers

Question:	Are these 4mm or 2mm diameter pins. I need 2mm but none of the good banana plugs are labeled
Answer:	4mm. All banana plugs come in one standard size.
Question:	Can i use these on a 12v system as power feeds? if so how many amps? looking for at least 15a on 12v
Answer:	That should work fine on a 12v power supply, we use those plugs for a similar purpose on the variable power supply that we have here in the lab.
Question:	Can I use with 18 gauge speaker wire
Answer:	Yes 18 gauge stranded wire will work fine.
Question:	I have the old style speakers that have the connection that you press to push the speaker wire into. Will this work with the new style plugs
Answer:	If you are asking if the banana plug will fit into the connectors you push the speaker wire into then the answer is probably no. For that type of connector I would consider coating the ends of the speaker wire with a thin layer of solder once the ends are in good shape so they will be easier to connect and disconnect.

Product features

Deadbolt Banana Plugs

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana Plugs by Sewell. These high quality plugs use self-crimping teet to provide an extremely secure and low profile connection without solder or screws. That means that you will not only speed up your install time, but their low profile allows you to put your speakers or receiver closer to the wall.

Fast Install

Thanks to our Quick-Lock technology, you can install each Deadbolt banana plug in around 30 seconds.

Low Profile

Deadbolts are one of the smallest banana plugs, giving you a cleaner install and allowing you to keep your equipment closer to the wall.

High Quality Components

Deadbolts feature connectors that are coated in 24k gold to ensure a great connection that lasts the life of the cable.

Product description

HannLinte Speaker Wire Cable



This heavy-duty 12 AWG speaker cable with brass/copper banana plugs is ideal for typical & custom installs alike. Banana plugs take away the hassle of cutting/fiddling around with speaker wire.



Audiophile Equipment compatible with popular home theater equipment such as KEF LS50 Mini Monitor, Marantz PM-8005 Integrated Amplifier, Micca MB42X Bookshelf Speakers, Onkyo TX-8050 Network Stereo Receiver, Pioneer Andrew Jones Designed Center Channel Speaker / Bookshelf Loudspeakers / Floor standing Loudspeaker / Add-on Speakers for Dolby Atmos / Watt Powered Subwoofer, Polk Audio PSW505 12-Inch Powered Subwoofer, SMSL Class D Amplifier + Power Adapter and more!



Product Features:

- Connects & supplies a high-quality signal path between audio components

- CL2 rated for in-wall

- Dual conductor 12 AWG, with color coding to distinguish polarity

- Brass/copper banana plugs for typical & custom installs

- Corrosion-resistant gold-plated connectors & oxygen-free stranded copper wire (high strand count) for pro-grade clarity

- No-slip PVC Y-Boot & durable, yet flexible cable jacket



Compatibility:

Banana plugs are typically compatible with audio components like speakers, A/V receivers, amplifiers or other sound applications.



Installation:

Plug-&-play: Ready to use, once each end is connected to respective ports on a compatible unit (each end has 2 banana plugs).



Package includes: 1 x HannLinte 12AWG premium heavy duty braided Speaker Wire Cable

• Maintain Best Audio and crisp clear sound with this dual conductor 12 AWG oxygen-free pure copper (OFC), color coding banana plug to enable matching polarity, high strand count wires in a no-slip PVC Y-Boot and a durable braided jacket.
• Precision bolted interior banana plug terminations create a secure connection and a convenient alternative to cutting and terminating speaker wire with banana plugs.
• High-end look with braided jacket wrapped around speaker wire, giving them extra protection to your speakers' finish allowing Pro-grade sound quality yet retaining the flexibility of ordinary speaker wire.
• Quick and easy installation for connecting a speaker to an A/V receiver or amplifier with banana plug style ports.
• Package includes: 1 x HannLinte 12AWG premium heavy duty braided Speaker Wire Cable

• 100ft 14-gauge speaker wire
• 12 closed screw banana plugs
• True spec and soft touch wire
• Great for car or home use
• 2 jacket colors make for easy polarity identification

User questions & answers

Question:	Can this be used inside walls
Answer:	I also have monster cables connecting my front speakers to my stereo receiver. I used this cable to connect a center channel to my receiver. I agree that you most likely won't hear a difference. That being said, this is a high quality cable for a great price and the banana plugs are an added convenience.
Question:	Is there any difference between 14 n 18 gauge speaker wire
Answer:	I didn't notice any nasty smell from the cables I received !!!!!!
Question:	How do you pull the wires apart
Answer:	Each cable has two wires encased in one sleeve with two connectors on each end, one for + (red) and one for - (black). The connector terminals on any recently manufactured speakers should be coded red and black as well. If the speaker terminal is circular with a hole in the middle, make sure the terminal is fully closed by turning clockwise and insert the Mediabridge plug into the terminal hole. You need one Mediabridge cable for each speaker.
Question:	Does the banana plug go into the same springeslot that bare wire did
Answer:	Yes, I removed the banana clips from one end to be able to connect the bare speaker wires to my older Bose speakers. I did use a wire tool to remove the covering. It worked very well and I’m pleased with the results.

Product features

100ft of 14 Gauge Speaker Wire

• 100 feet (30.5m)
• True Spec Stranded Wire
• Rugged Blue/Black Frosted PVC Jacket
• Two Color Jacket for Easy Polarity Identification
• Copper Clad Aluminum Conductor (CCA)
• Compact Spool for Easy Storage

Closed Screw Banana Plugs Included

• 6 Pairs/12 Closed Screw Banana Plugs
• Gold Plated
• Red/Black Gear Logos for Easy Channel Identification
• Closed Screw Design
• Accepts 12 to 18 Gauge Speaker Wire
• Compatible with Home Theater Receiver Bindings

Great for Home Theater Systems

• Low Memory Jacket Makes it Easy to Route Close to Wall Moldings
• Easily Installs into Most Banana Plugs
• Jacket Strips Easily for a Quick Install

Step 1: Strip Speaker Wire

Strip your speaker wire and unscrew the banana plugs

Step 2: Insert Speaker Wire

Push your wire through the bottom half of the plug

Step 3: Distribute Speaker Wire

Evenly distribute the speaker wire over the non-threaded parts of the screw

Step 4: Tighten Banana Plugs

Securely tighten the plug (making sure the doesn't overlap the threads)

• 100ft 14-gauge speaker wire
• 12 closed screw banana plugs
• True spec and soft touch wire
• Great for car or home use
• 2 jacket colors make for easy polarity identification

User questions & answers

Question:	Can you use this wire for dc splicing? for example, appliance with broken cord>newly spliced red and black wire>connector>power source
Answer:	Hello, We apologize - the image shown is our 2709B which has auto ranging. The correct image for the 2707B has been uploaded, pending approval from Amazon. In the meantime, please visit our website at www.bkprecision.com to view the correct photo and specs for our model 2707B. Again, we apologize for the confusion.
Question:	Does anyone know the specific mm diameter of the wire? i am hoping to sleeve them and would love to know before i order
Answer:	No, you would need two ADCs working at the same time in parallel to perform this task. But you could use serial comm to send commands and read voltage and current at a reasonable rate.
Question:	Can this wires be cut
Answer:	The unit ships with (test leads, power cord, spare fuse, operation manual, calibration certificate and test report); USB cable not included https://www.bkprecision.com/products/multimeters/2831E-4-1-2-digit-true-rms-bench-digital-multimeter.html please enter hyperlink into your browser to product page + datasheet. In regards to the Python code, see github link for a sample code: https://github.com/BKPrecisionCorp/2831E-and-5491B
Question:	Can I use these wires to hook up my kicker 500watt amp and my single 10inch kicker 600watts subwoofer
Answer:	BK2831 has USB control interface and SCPI(Standard Commands for Programmable Instruments) compatible.=> http://www.bkprecision.com/products/multimeters/2831E-4-1-2-digit-true-rms-bench-digital-multimeter.htmlI think you may include this model to your labview project.=> https://www.youtube.com/watch?v=uOvXHwkpfV8
Question:	If soldering is used in making the banana plug connections, what grade solder... is it audiophile grade solder?? Thanks
Answer:	The meter can connect to the PC via USB. SCPI is used to program and query the meter. You can measure voltage, but I'm not sure about time. You can measure frequency and period if that is what you need.
Question:	Is the brand "Monoprice" printed on anything that is visible? Like the connector or the jacket
Answer:	The voltage used to perform resistance tests on the OHM position on the selector dial is approximately .39V, which is below the .5V to .6V level that will turn on a typical semiconductor junction. This is good for in-circuit testing, as it will not forward bias standard semiconductor junctions, which would skew some in-circuit ohm tests low. The voltage used on the DIODE position is much higher, approximately 3.5V, which is more than enough to turn on a semiconductor junction, which is the purpose of the DIODE position. The DIODE position is best used on components out of circuit.
Question:	This listing is slightly ambiguous, is this a two speaker pair or just positive and negative pair
Answer:	Its a good meter, it works, but as of durability not as good as a fluke i used to own. The one thingthat broke on my 2709b was the stand on the back.. Only after a few weeks of use, really bad design.
Question:	Are the red and black wires separate the full length, or are they enclosed in another braid
Answer:	+1 on the quick responsiveness. Also, for more in-depth information on this meter and others like it, Dave Jones does a great job comparing all the features: /https://www.youtube.com/watch?v=3-_dUB8vy8U.

Product features

Affinity Premium 14AWG Braided Speaker Wire with Gold Plated Banana Plug Connectors

Monoprice Affinity Premium Braided Speaker Wire combines great looks and durability with exceptional sonic performance, making it the ideal speaker wire solution for the serious audiophile. The 14AWG copper conductors have been tinned to prevent corrosion and the braided fabric outer jacket not only helps prevent damage to the jacket, but also won't scratch your speaker cabinets. Each wire is pre-terminated with color-coded, gold plated banana plugs at each end, ensuring that you can quickly and accurately connect your speakers to your amplifier. There is no better choice than Monoprice's Affinity Premium Braided Speaker Wire!

Two Conductors

Two Conductors: Affinity Premium Braided Speaker Wire features two 14AWG conductors with color-coded aluminum connectors, making it easy to match polarity.

Long Lasting Durability

Long Lasting Durability: Featuring tinned, oxygen-free copper conductors and gold plated banana plugs, these wires are designed for long-term corrosion resistance, durability, and sonic clarity.

Premium Soft-Touch Braided Jacket

Premium Soft-Touch Braided Jacket: These wires have been wrapped in braided fabric, giving them a soft-touch to protect your speakers' finish, yet retaining the flexibility of ordinary speaker wire.

Professional Grade

Professional Grade: Packed with professional grade features, such as color-coded, brushed aluminum connectors, gold plated banana plugs, and a braided fabric jacket, you get the appearance of a professional installation, without the cost of hiring someone or the hassle of making them yourself.

100ft of 14 Gauge Speaker Wire

• 100 feet (30.5m)
• True Spec Stranded Wire
• Rugged Red/Black PVC Jacket
• Two Color Jacket for Easy Polarity Identification
• Copper Clad Aluminum Conductor (CCA)
• Compact Spool for Easy Storage

Closed Screw Banana Plugs Included

• 6 Pairs/12 Closed Screw Banana Plugs
• Gold Plated
• Red/Black Gear Logos for Easy Channel Identification
• Closed Screw Design
• Accepts 12 to 18 Gauge Speaker Wire
• Compatible with Home Theater Receiver Bindings

Great for Home Theater Systems

• Low Memory Jacket Makes it Easy to Route Close to Wall Moldings
• Easily Installs into Most Banana Plugs
• Jacket Strips Easily for a Quick Install

Step 1: Strip Speaker Wire

Strip your speaker wire and unscrew the banana plugs

Step 2: Insert Speaker Wire

Push your wire through the bottom half of the plug

Step 3: Distribute Speaker Wire

Evenly distribute the speaker wire over the non-threaded parts of the screw

Step 4: Tighten Banana Plugs

Securely tighten the plug (making sure the doesn't overlap the threads)

Product description

An Amazon Brand

• 3 foot audio cable for speakers, amplifiers, A/V units and more
• Gold-plated banana-tip plugs deliver a clear signal with minimal distortion
• Oxygen-free stranded copper wire provides clarity and sonic accuracy
• Flexible, non-slip PVC boot and cable sheath for durability and protection
• Corrosion-resistant housing
• CL2 rated for in-wall use

User questions & answers

Question:	Can you remove the banana clips from one end
Answer:	Yes, I removed the banana clips from one end to be able to connect the bare speaker wires to my older Bose speakers. I did use a wire tool to remove the covering. It worked very well and I’m pleased with the results.
Question:	Is it common for the tips and shaft/base to come loose? This kept happening before and during installation. It’s like the plugs don’t tighten up
Answer:	Yes, these do come loose all the time from the time they arrive. But they're good wires durable and flexibility. You can always swap the plugs out or glue them like suggested. I would have to say, out of the few cables I do have they're my favorite, and at a reasonable price.
Question:	Is this for a pair of speakers or just one speaker
Answer:	Just one speaker. Black and Red wires.
Question:	what gauge is the wire
Answer:	16 gauge