10 best gls audio banana plugs

Product description

They will work with wire gauge as large as 12 gauge. They have .75" spacing between the gold tips. Feel free to buy as many sets of 16 as you would like. Please Note: The spacing between the tips is the industry standard .75". If your speakers or receiver does not have .75" spacing then you will require Single Banana plugs instead of Dual Banana plugs. Single Banana Plugs are available for the non-standard plug arrangement, see our GLS Audio Black Chrome Series Banana Plugs and Locking Series Banana Plugs!!

• 24k Gold Plated H59-1 Brass Construction Material
• .75" Tip to Tip Spacing (Industry Standard)
• No Soldering & No Crimping
• High Impact Durable Housing
• Use wire as large as 12 gauge

User questions & answers

Question:	Is it true that 12ga wire will NOT fit in the holes?? and why not it is a pro audio standard to use 12 ga wire for speaker terminations
Answer:	No, you only need to buy one. You do need a "Y" interconnect to connect the single subwoofer output on your receiver, or preamplifier, to the stereo inputs in your subwoofer's built-in amplifier. The "Y" interconnect has two male connectors on one end and a single female connector on the other end. The subwoofer output signal from your receiver is monophonic, not stereo. I hope this helps. Good luck.
Question:	Will these posts fit in the holes provided for the wires to clip in? They look pretty thick
Answer:	Hello, This particular cable has one connector on each end. We have a version of this cable with 2 connectors: https://amzn.to/2H2QF64 Or we have adapters: https://amzn.to/2H7Ad4J Thanks, Mediabridge Customer Support 856-216-8222 [email protected]
Question:	Has anyone tried crimping the plastic loop
Answer:	Only one cord is required to connect to the sub woofer.
Question:	what holds the wire in place
Answer:	A great alternative to the poorly-built Sangean ANT-100 is the following: August DTA207 Digital TV Antenna AND the Monoprice 104130 RCA male to F female adapter. (Both items are available on Amazon.) While the August is a tv antenna, it also covers the weather band frequency. You need the adapter to connect the antenna to the RCA jack on the back of the radio.I tried it out with my Motorola MWR839 weather radio (a clone of the Sangean CL-100). It works slightly better than the built-in antenna. So if you can't place the radio where it would best receive the signal, the August DTA207 may do the trick. I had no problems getting the NOAA weather station from Newport, Oregon, from 20 miles away. The August seems built well enough that it will not easily fall apart (unlike the Sangean ANT-100). I never bought a Sangean ANT-100 because of all the bad reviews on Amazon. Why buy a piece of junk when something better is available?People rely on these radios for safety. It is very important to have a good antenna.

Product description

GLS Audio speaker cables are manufactured with the highest grade materials in the industry. The copper wire is rated in AWG spec which stands for "American Wire Gauge". The AWG rating was developed by the USA as a result of some wire manufacturers stating their wire was a certain spec when it really wasn't. You'll notice most imported wire and cable manufacturers will rate their wire in "G" or Gauge (not AWG). The "G" rating can be used for any wire size. For example: A 16G rated cable may only be equivalent to a 24AWG cable (or worse). There are no regulations or specifications on "G" rated cables. How can you determine if a "G" rated cable is the same spec as an AWG cable? Unfortunately, you can't unless you test the power loss per foot. Sometimes the weight may be an indicator. For example: GLS Audio 50ft 12AWG cables weigh about 4lbs whereas most of our competitors weigh about 2.5lbs. This may be a result of the copper wire gauge not being true AWG.

• True 16AWG (American Wire Gauge) Rated up to 2,500 Watts
• Thick 8.5mm Durable & Flexible Rubber Jacket
• Professional Quality and Construction
• Genuine GLS Audio Connectors and Plugs

User questions & answers

Question:	How wide apart are the banana prongs
Answer:	It splits about 1 foot from the double male end. Splitting it any further towards the single end would be a waste of cable.
Question:	Is there a way to tell which side is positive and which is negative
Answer:	30" including connector, 12" on split including split and connectors
Question:	what is the cable gauge
Answer:	Yes ,they work great IF you have the correct female ends on the speakers

Product description

Our GLS Audio white wall plates can be disassembled for use in your own situation such as single gang, dual gang, triple gang, etc electrical boxes. Anti-spin Hex design prevents posts from spinning. Our plates can be used with any standard style of Decora plate. Our plates only come in white, but you can to use your own Decora plate if you wish. Our wall plates have polarity color coded gold posts which you can also remove entirely from the plate. GLS Audio is your premiere brand!

• Durable Hard Poly White Construction.
• Gold Plated H59-1 Brass Binding Posts.
• Accepts Single Banana Plugs or Bare Wire.
• Thumb Screw Terminals For Easy Install.
• No Soldering or Special Tools Required.

• [EASY INSTALLATION & DESIGN] Banana plugs make speaker wire installation a breeze and are great to use with A/V receivers, amplifiers, surround sound systems, banana wall plates
• [CLOSED TYPE DESIGN WITH DUAL SCREWS] Isolates wires which keep them from shorting out and the two set screws keep the wire connection secure
• [COLOR CODED AND GOLD PLATED CONNECTORS] Banana connectors are gold plated to resist corrosion and the collar is color coded for polarity identification
• [WORKS WITH MULTIPLE SIZES OF SPEAKER WIRE] Compatible with 12AWG to 18AWG speaker wire
• [LIMITED LIFETIME WARRANTY] All FosPower products come with a Limited Lifetime Warranty

User questions & answers

Question:	I buy last time this banana plugs for my receiver denon avr 6500h i try to inserted but it can't go through i thought this standerd for avr &spea
Answer:	When new, the plugs are somewhat of a tight fit. Hold the AVR and push firmly. They will fit.
Question:	My Yahmaha amplifier has flip/squeeze plugs, not the round ones I'm seeing here. Will these work
Answer:	I tried it on a flip style and they were too big. The measurement of the plug is 0.15" or 3.85mm at the tip, at the widest 0.20" or 5.3mm. Your flip connectors may be larger than my example, a quick msr of the max gauge wire you can use will answer.
Question:	Can i use these plugs with the speaker cables "rattlesnake 6" with a profile of 6mm^2? or what plugs are to prefer for these cables
Answer:	This would not work with your speaker cables as FOSCBL-2312 is 4mm. Hope this helps. Thank you.
Question:	is this a 4mm plug
Answer:	Yes you are correct, this is a 4mm Banana plug.

Product features

Gold Plated Connector

Prevents corrosion and insures a smooth connection.

Works with Multiple Sizes of Speaker Wire

For use with 12AWG to 18AWG speaker wire.

Design

FosPower's banana plugs make speaker installation simple. They are designed for use with speakers, A/V receivers, amplifiers, surround sound systems and banana wall plates that use banana style binding posts. Banana plugs make it easy to connect speaker wire to your amplifiers/receivers and speakers.

Color Coded

Conveniently color coded with two different colors for easy polarity identification.

Dual Screws

2 set screws secure the speaker wire to the banana plug.

Package Includes:

12 pairs of banana plugs (24 pieces)

Product description

These Silverback banana plugs have the quality you’ve come to expect from Sewell, including gold plated connectors, a heavy duty, but light casing, and a tight cable-screw design. What sets these banana plugs apart is the unique dual-screw lock design. This connection will secure your cable more than a single-screw or open-screw design. Dual-screw connectivity provides a secure connection, durability, and the most crisp and clear signal possible with more signal transmission through contact. Our best banana plug yet!Today, many electronics use the banana plug interface, also known as binding post (referring to this connection in its female form). This female binding post connection that accepts this banana plug is found on virtually all audio/video receivers, speaker wall plates, and more. Banana plugs offer an alternative to inserting a bare speaker wire into your equipment. Often a bare speaker connection is not as reliable as a guaranteed banana plug connection. Wires tend to get pulled out or frizzy after time passes. Banana plugs require only one install, giving you a permanent and robust connector at the end of your speaker wire.

• 24K gold plating on the Connectors for a lifetime of use, with a crystal clear signal
• Double screws, when properly fastened, are said to be as effective as soldering, but clearly with much less hassle.
• Accepts wire size up to 4mm
• The casing unscrews over the tip, so you don't have to worry about keeping it on the cable when installing. For a hassle-free solution

User questions & answers

Question:	Will this work with 12ga wire
Answer:	This should not have happened. You need to contact the company of the cover because I am sure it is under warranty. This also happen to me and the cover company requested that I send them a 4 ft x 4ft section of the damaged liner. (I'm better sure them paid the postage) We received a new liner after a few weeks. My advise on liners is buy a med grade $90 to $130 dollar one. We throw ours out each year because they never last for the next year.
Question:	What is the diameter of the bottom opening. Is it wide enough to handle two 12 gauge wires for bi-wire
Answer:	we did not have to touch it, but I think you would be able to. and this is our 3 year using it no problem, we think however that we might have to purchase another one next year.
Question:	What are the dimensions of this item
Answer:	Not as thick as I thought it would be but it worked in our pool.
Question:	Are these connectors insulated? Meaning if a metal object touches two of them will it blow out the speaker
Answer:	No you cut it to fit the pool. It will float on the top of the water. But it has to be remove from the pool before anybody get into the water for safety reasons . It works great you will love it.

Product features

Silverback Banana Plugs

Silverback banana plugs have gold plated connectors, a heavy duty, but light casing, and a tight cable-screw design. Its unique 2 screw lock design will secure your cable more than a single screw, or open screw design. Dual screw connectivity provides a secure connection, durability, and the most crisp and clear signal possible with more signal transmission through contact.

Premium Materials

• 24K Gold plating
• Solid brass banana plug tip and housing
• Aluminium outer sleeve (with brass threaded insert)
• Non-conductive clear coating on the aluminum sleeves
• Anti-vibration O-ring

Intuitive Design

• Dual setscrews from opposing sides maximize the wire holding power
• Slim and lightweight, Silverback plugs won't overbear your cables
• Small flat-head screwdriver included with all 6 and 12 packs
• O-ring to keep the outer sleeve secure during transport and from speaker vibration
• Non-conductive coating prevents accidental shorts
• Aluminum outer sleeve is designed to be installed after your cable is terminated and tested

How to Wire Silverback Banana Plugs

1. Unscrew the jacket to reveal the core of the Silverback Banana Plug. Loosen the screws and insert the speaker wire into the core of the banana plug.
2. Tighten the 2 screws to secure the speaker wire to the core of the Silverback Banana Plug.
3. Replace the jacket over the core.
4. Your Silverback Banana Plug is ready.
5. Connect and enjoy!

Product description

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with the Sewell deadbolt banana plugs. Using self crimping teeth These plugs provide a simple, secure, and low profile connection without requiring soldering or screws. These 1.6” inch plugs are extremely low profile making it so you can put your speakers or receiver closer to the wall. Unlike other banana plugs that use low quality metals like zinc alloy The Sewell deadbolt banana plugs use pure copper and high Quality brass with 24K Gold plating. Installation one of the best things about the deadbolt banana plugs is that installation is quick, secure, and requires no tools. Just follow these steps. Feed the cable through the bottom piece. Push the cable back over the teeth on the bottom piece. Screw the top piece to the bottom one. You're finished. All in all you should only need 10-20 seconds for this entire operation. What are banana plugs? Today, many electronics use the banana plug interface, also known as binding post (referring to This connection in its female form). this female binding post connection that accepts this banana plug is found commonly on virtually all audio/video receivers, speaker wall plates, and more. Banana plugs offer an alternative to inserting a bare speaker wire into the equipment. Often a bare speaker connection is not as reliable as a guaranteed banana plug connection. Wires tend to get pulled out or frizzy after time passes. Banana plugs require only one install, giving you a permanent and robust connector at the end of your speaker wire.

• 24k Gold Plating on Connector and Crimping Teeth
• Fast Lock technology makes it easy for self crimping a reliable connection.
• Heavy Duty Brass Casing for maximum durability
• Wider base minimizes shorting for maximum signal transfer.
• Maximum Wire Size 8 AWG (10 AWG suggested)

User questions & answers

Question:	Are these 4mm or 2mm diameter pins. I need 2mm but none of the good banana plugs are labeled
Answer:	4mm. All banana plugs come in one standard size.
Question:	Can i use these on a 12v system as power feeds? if so how many amps? looking for at least 15a on 12v
Answer:	That should work fine on a 12v power supply, we use those plugs for a similar purpose on the variable power supply that we have here in the lab.
Question:	Can I use with 18 gauge speaker wire
Answer:	Yes 18 gauge stranded wire will work fine.
Question:	I have the old style speakers that have the connection that you press to push the speaker wire into. Will this work with the new style plugs
Answer:	If you are asking if the banana plug will fit into the connectors you push the speaker wire into then the answer is probably no. For that type of connector I would consider coating the ends of the speaker wire with a thin layer of solder once the ends are in good shape so they will be easier to connect and disconnect.

Product features

Deadbolt Banana Plugs

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana Plugs by Sewell. These high quality plugs use self-crimping teet to provide an extremely secure and low profile connection without solder or screws. That means that you will not only speed up your install time, but their low profile allows you to put your speakers or receiver closer to the wall.

Fast Install

Thanks to our Quick-Lock technology, you can install each Deadbolt banana plug in around 30 seconds.

Low Profile

Deadbolts are one of the smallest banana plugs, giving you a cleaner install and allowing you to keep your equipment closer to the wall.

High Quality Components

Deadbolts feature connectors that are coated in 24k gold to ensure a great connection that lasts the life of the cable.

Product description

Goupchn - Make something different. At Goupchn, we strive to provide high quality tools and accessories that inspire our consumers to live a more convenient and enriched lifestyle. Our unlimited passion for innovation and solutions drives us to move forward. We have strong belief that only if we have a deep understanding of people’s needs and desires, we can make our products become different, which may make your life different.

Product model: P3008-10PCS-2C

Material: PVC + Copper

Current Voltage: 32A / 30V

Product color: Red Black

Shipping list: 5PCS Red + 5PCS Black

• 4mm banana plugs are made of pure copper material which can withstand up to 32A current. The shell is made of insulating soft PVC.
• The wire can be crimped with screws at the tail, and the wire diameter is 2.5-3.5mm. The welding connection effect is better.
• Suitable for engineers or DIY enthusiasts. 4mm banana plugs fit most meters. Perfect for doing testing in schools, homes, laboratories and factories.
• Package include: 5PCS Black + 5PCS Red Stackable Banana Plugs.
• Warranty: Hope you can be satisfied with our banana plugs. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us.

Product description

GLS Audio Neutrik compatible Speakon connectors are manufactured to be the highest quality connectors on the market. Made to the exact same specifications as the original manufacturer, these connectors are guaranteed to work in any 4-pin or 2-pin speakon panel and deliver the best signal transfer you can get.

• Neutrik Speakon Compatible
• GLS Audio High Quality Guarantee
• Easy screw in set pin design
• Stress relief designed for 10 to 16 gauge AWG cables
• 4 Pack for added savings

User questions & answers

Question:	I want to wire 4 speakers parallel into 2 channels.... Can I use each for 2 sets of speaker? I mean using +1,-1 for one and +2,-2 for another speaker
Answer:	Yes. That remote is compatible with the APS686T.
Question:	dose this connects to the mixtuer or power amp or regular receiver
Answer:	I brought to replace one of my current remotes and was told that it could not be programmed so I wasted money. I would check with whomever you plan to have install for you first
Question:	Are these 4 pole
Answer:	Dear Customer, Thanks for your message. In general the cable is intended for input 1 RCA and output 2 RCA, not the other way round. The input can be high frequent (digital audio) or low frequent (subwoofer). Maybe you can let us know what kind of configuration you use or plan to use?Please feel free to contact me at anytime also under [email protected] best regardsFelix Idel
Question:	Are these the adapter that you would use for 1/4" cords without cutting the wire
Answer:	Yes it will work, but why not reverse that and take 1 output from the avr to 2 input on the external amp!

Product description

GLS Audio speaker cables are manufactured with the highest grade materials in the industry. The copper wire is rated in AWG spec which stands for "American Wire Gauge". The AWG rating was developed by the USA as a result of some wire manufacturers stating their wire was a certain spec when it really wasn't. You'll notice most imported wire and cable manufacturers will rate their wire in "G" or Gauge (not AWG). The "G" rating can be used for any wire size. For example: A 12G rated cable may only be equivalent to a 18AWG cable (or worse). There are no regulations or specifications on "G" rated cables. How can you determine if a "G" rated cable is the same spec as an AWG cable? Unfortunately, you can't unless you test the power loss per foot. Sometimes the weight may be an indicator. For example: GLS Audio 50ft 12AWG cables weigh about 4lbs whereas most of our competitors weigh about 2.5lbs. This may be a result of the copper wire gauge not being true AWG.

• True 12AWG Rated (American Wire Gauge)
• Genuine Neutrik Speakon NL4FX (NL4FC)
• Thick 10.5mm Durable & Flexible Rubber Jacke
• GLS Audio Hook and Loop Wrap (Reusable)
• Professional Quality and Construction

User questions & answers

Question:	Is this an adapter i can use to hook up my laptop to two wire speakers
Answer:	I use this with bass and it's great. The tone is all there (in fact, I'd say it's better than using a cable). You will not be disappointed.
Question:	Is this a 2 pole or 4 pole speakon connection
Answer:	DavyoI'm a four stringer but with the G30's 10 Hz bottom frequency response it should handle a B string's 31Hz with room to spare. T Case the Bass

Product description

GLS Audio speaker cables are manufactured with the highest grade materials in the industry. The copper wire is rated in AWG spec which stands for "American Wire Gauge". The AWG rating was developed by the USA as a result of some wire manufacturers stating their wire was a certain spec when it really wasn't. You'll notice most imported wire and cable manufacturers will rate their wire in "G" or Gauge (not AWG). The "G" rating can be used for any wire size. For example: A 12G rated cable may only be equivalent to a 18AWG cable (or worse). There are no regulations or specifications on "G" rated cables. How can you determine if a "G" rated cable is the same spec as an AWG cable? Unfortunately, you can't unless you test the power loss per foot. Sometimes the weight may be an indicator. For example: GLS Audio 50ft 12AWG cables weigh about 4lbs whereas most of our competitors weigh about 2.5lbs. This may be a result of the copper wire gauge not being true AWG.

• True 12AWG Rated (American Wire Gauge)
• Professional Quality and Construction
• Thick 10.5mm Durable & Flexible Rubber Jacke
• GLS Audio Hook and Loop Wrap (Reusable)

User questions & answers

Question:	will this work on a tablet to a speaker
Answer:	no, you nee o get an adaptor t hook it up to a tablet. cable is also mono, while tablet output is stereo...
Question:	Se puede conectar con el iPhone
Answer:	no es para iphone. Esto es para conectar un altavoz como en un amplificador de guitarra.
Question:	Does it play stereo sound through one cable
Answer:	No, this is a mono cable.
Question:	Maybe this is a dumb question, but it works for all the impedances and watts? i have to connect a h&k tubemeister 5 to a 212 boutique cabinet
Answer:	Yes. This is a good, thick cable. It will work fine.