14 best winegard amplifiers

Product description

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

• The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
• TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
• Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
• Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
• Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used

User questions & answers

Question:	Is there a powered splitter or something that would allow this product to work for placement in between the preamp and power inserter
Answer:	If you want to have a splitter between the preamp and the power inserted, you need to use a "power passing" splitter. I used this one from Amazon http://www.amazon.com/gp/product/B0018BN0UW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1. You may choose a different one depending on the number of connections you need at the splitter.
Question:	can this be used with Winegard FL6550A to strengthen the signal
Answer:	No. It has a built in preamp. I used this preamp with the FL6550A antenna and the channels I had dropped in half from 51 to 26. Actually makes the FL6550A antenna perform worse!
Question:	Can I use this to boost sig for 2 antennas: Clear Stream's DB4E UHF antenna PLUS C5 VHF antenna? Do I put the amp after the combiner
Answer:	I'll add my answer for future installers. I run two dual element antennas pointed in opposite directions and use TWO preamps -> then combine.If I were running two antennas for the purpose of band separation (UHF / VHF) - I might combine first then preamp. The BUMMER here - is that this is an EXCEPTIONAL unit with only 1db of noise. That means it outperforms other preamps that declare higher gains. This Wineguard amplifies the VHF and the UHF signals separately - which would make you ask - WHY ON GOD's GREEN EARTH would you NOT give us the ability to hook up separate UHF / VHF antenna feeds??There are preamps out there that do have separate inputs - RCA has a very popular unit around $20 but it won't perform as well as this overall. Id try FIRST - to combine at the mast- preamp and then distribute.If you don't like the results - you can ALWAYS add another preamp and change it to a preamp for each antenna then combine. What a shame though - since you would only be using half the capability of each preamp in the second scenario.
Question:	Will this booster improve (%) both signal strength & quality? Will it make the OTA CH's that are 100% (w/o amp) worse
Answer:	You have a given amount of tv signal present in the air, (assuming, your within range and elevation to capture a signal), also signals fluctuate according to temperature and moisture present in the atmosphere. So this is generally a constant changing thing that we have no control. Sometimes there are band openings that cause tv signals to behave in ways in both favorable and unfavorable depending on conditions that are present. Your digital TV tuner in your TV, in order to lock onto a signal, (that signal must be of high integrity and not out of phase). Generally the antennas of higher gain do better than cheap off the shelf small antennas (especially indoor/outdoor models). Also the inexpensive antenna systems that claim 150 or more mile range. All feedline has loss; some are better than others in this problem. The more loss in your TV feedline cable, will result in less tv signal reaching your TV tuner. RG-6 is a better grade than rg-59 resulting in better quantity of signal available to the tv tuner. Tv preamplifiers like this one, boost the signal level at the antenna location so as to compensate for the loss in your cable run to the tv tuner. Another issue is that you cannot amplify a signal without creating noise (distortion), in the signal. Some preamplifiers do their job by not creating so much noise in the signal. (The lower the noise, the better); regardless of gain figures although high gain does help. This unit is of good quality and has the added benefit of separate uhf/vhf antenna inputs for those who need to use single band tv antennas to achieve high results to specific applications. Your TV tuner can only lock onto a signal of high integrity. This unit is a good choice to help deliver that signal to the tuner, assuming everything else is in order. If multiple antennas are used for digital TV reception; they must be connected prior to being amplied, otherwise it will be out of phase and the tv can't lock onto signal like that. Hopefully, I have explained this so it's easier to understand. There is a science behind," how this works". Hope this advise has helped others. 73 and GOD bless K5EWM.

Product features

More Range, More Channels, Better TV Reception

Extend the range and signal quality of your non-amplified digital HDTV antenna with the LNA-200 Boost XT Outdoor Digital TV Antenna Amplifier. It features TwinAmp Technology, which separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.

This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation — maintaining the purest signal path possible.

Watch More Free HDTV Content

Winegard antennas provide the maximum content available in your area with antennas capable of receiving both VHF and UHF signals from up to 65 miles away.

Add a Winegard Boost XT Amplifier featuring Clear Circuit and TwinAmp technology to give you the absolute best signal quality.

Cut-The-Cord And Save

Watch what you want without the big monthly bill. Cut-the-cord and watch the top-rated shows for free.

Pair With A Streaming Device

Pair your antenna with a streaming device such as a Roku, Fire TV, or Chromecast for maximum programming (sold separately).

Watch your local news, weather, and live sports on your antenna and enjoy other TV shows and movies with services like Netflix, Amazon, or Hulu for a fraction of the cost (subscription required).

Product description

Winegard LNA-100 Boost Indoor Digital TV Antenna Amplifier The LNA-100 indoor amplifier increases range and delivers a crystal clear TV signal to HDTVs so viewers can get more broadcast TV channels in high definition than with an antenna alone. Using the latest advances in amplifier technology, Boost enhances any indoor non- amplified antenna, delivering more range and available channels. In The Box - LNA-100 Boost Indoor Digital TV Antenna Amplifier - USB Power Cable - 110V Adapter - Printed Documentation Size, Compatibility and Features - Dimensions: 8.5" x 0.8" x 1.5" - Boost any Non-Amplified TV Antenna - Minimize Pixelation and Dropouts - Receive More Channels - Gain (typical): 20 dB - Noise Figure (typical): 1dB - Power: +5V

From the Manufacturer

• HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone.
• Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna.
• In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V
• Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support.
• Winegard TV Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal equipment since 1954. Designed and built in the U.S.A.

User questions & answers

Question:	i understand that i add this between the antenna cable and the tv. do i need to plug this into an outlet as well
Answer:	Yes... It is a powered amplifer. You can either plug it into a wall receptacle or a USB port. If your TV has a open USB port you can power it there.
Question:	Can two antennas be boosted to one TV using a splitter
Answer:	I did this with a Splitter and it improved the reception because each Antenna was pointed in a different direction helping me get additional channels to one TV.
Question:	I get great reception on my tv (full bars), but running it through my channel master dvr, i can't get signal on some. will this help
Answer:	It may if it the reason that you are not receiving the channel is that it needs a small amount of amplification. Look at the signal meter on the dvr. If it shows a small amount of signal then amplification may help to give enough signal strength for the dvr tuner to lock on the channel.
Question:	So i add between the antenna cable and the tv. do i need to plug this in to an outlet as well
Answer:	Yes, you connect it between the tv and the antenna. And plug it into a wall outlet or a USB connection, for power. it comes with another wire and plug not shown in this picture.

Product description

The Winegard HDA-200 distribution amplifier is a heavy duty, quality built solution for the amplification and distribution of digital/analog broadcast signals from off-air and cable TV stations. It amplifies signals from 54-1000 MHz and features variable gain control from 0-18 dB. A 20 dB selectable FM trap eliminates offending FM stations. It also contains a 5-42 MHz 2-way bi-pass at +12 dB gain. It's housed in an industrial grade, weather resistant enclosure.

• Single Rf Input
• 24db Gain
• Single Rf Output With A 5mhz-42mhz, 2-way Bi-pass At +12db Gain
• Amplifies signals from 54-1000 MHz.
• 20 dB selectable FM trap
• 5-42 MHz 2-way bi-pass at +12 dB gain
• Weather resistant housing to withstand harsh environmental conditions.
• Refer user manual below.

User questions & answers

Question:	I have a ftatwaveamped antenna by winegard serving (2)tvs long cord if i add this this WinegardHDA200amp,would it bring conflict to the already amp
Answer:	Yes. It is 27note G59 - A85 range Thanks for asking.
Question:	can i add this amplifier to my Winegard flatwave amplified antenna, am feeding 2Tvs and atleast i have a very long cord atleast 100Ft
Answer:	Hi Chrys,Alesis support here! The manufacturer's warranty is valid for 1 year from the date of purchase. If you have any other questions, please feel free to email me directly at [email protected].
Question:	would i gert more channels attaching this amplifier with my antenna winegard flatwave antenna W/amplifier useing tvs,would it make it stronger signal
Answer:	Yes, the included AC adapter is dual voltage, if, by dual voltage, you mean *use 110VAC and 220VAC*. It clearly says so on the adapter. The output of the adapter is 12V 2.0A DC.
Question:	Would obtain more channels and more strength no freezing on channles, Due to long coax cable serving (2) tvs
Answer:	Hi, Alesis support here! Yes, Recital features a dedicated 1/4" sustain input; suitable for use with virtually any sustain pedal! We recommend using the ASP-2.

Product description

The WINEGARD HDA-100 distribution amplifier is a heavy duty, quality built solution for the amplification and distribution of digital/analog broadcast signals from off-air and cable TV stations. It amplifies signals from 54-1000 MHz 15dB and features a 5-42 MHz 2-way Bi-Pass at -2 dB loss. It's housed in an industrial grade, weather resistant enclosure.

• Used to overcome signal loss in coaxial running from antenna to TV
• Low-noise distribution amp
• 54Mhz-1, 000MHz
• Amplifies signals from 54-1000 MHz 15dB
• 5-42 MHz 2-way bi-pass at -2 dB loss
• Weather resistant housing to withstand harsh environmental conditions.
• Gain: 15 Db

User questions & answers

Question:	can this boost the signal from 2 antennas to one tv
Answer:	This is what it know as a distribution amplifier. What that means is that if you have a good signal to this amplifier, it will drive several TVs. If you have a very long feed from the antenna to the splitter, you may be better suited with a preamplifier at the antenna. It boosts the signal before the long cable. It usually is power through the same cable as the signal is fed through. For example, if the splitter is in the basement, you would plug in the power supply there and insert it in the cable going to the antenna. The signal from the antenna still feeds the opposite direction to your splitter. The reason for doing it this way is that once a signal is degraded by a long feed, you would only be amplifying the noise and poorer signal. A good cable (RG6 quad shielded) should be fine for 50 feet, provided the connectors are properly installed. Above that length. I would use the preamplifier. The same company sells them also. One thing to keep in mind is that with old analog signals, you would get ghosting or fuzziness with a weak signal. The digital signal is much more annoying with digitalization and audio or video dropouts. I hope this helps.
Question:	Can you recommend a good antenna to use with this
Answer:	Thank you for your answer. It is very easy to replace it. However, it is difficult to purchase a sponge separately. I'm sorry I couldn't help you.
Question:	Does this have an FM trap? I don't care about TV signals, I want to help my weak FM signals
Answer:	You'll need to order better mallots. The mallots are flimsy.
Question:	Is this suitable for 4 TVs or does it require additional splitter added after
Answer:	Anything is possible! Believe!

Product description

A +12 VDC VHF/UHF amplified wall plate with +12 VDC receptacle, cable input jack and second set jack. White only. Use with Winegard non-amplified Sensar TV antennas only (RV-5095 and RV-5090 only).

• Wall Plate Signal Amplifier
• Use with Winegard non-amplified Sensar TV antennas (RV-5095 and RV-5090 only)
• Features +12 VDC receptacle, cable input jack and second set jack
• Fit specific, check part numbers for compatibility
• Winegard RA-7296 Wall Plate Signal Amplifier for non-amplified antennas

User questions & answers

Question:	Is this unit, fuse protected
Answer:	You are not going to like my answer: Suitability for 4 TVs will depend on your configuration: 1) For clarification, the Winegard HDA-100 is an amplifier, not a splitter. It takes the input signal and amplifies it to the output port 2) To split the signal to more than 1 TV, you will need a passive splitter. I believe there are 1-in to 4-out Coax Cable splitters available 3) Note that the amplifier needs to be close enough to the source (generally an antenna) so that the input signal is relatively robust. It cannot properly amplify a deeply degraded input signal. 4) The amplifier amplifies the signal; however, the splitter will divide the signal's energy/signal between the 4 output ports 5) The distance from the signal source (antenna) and the Winegard HDA-100 amplifier is important. If too long, the signal will be degraded before it reaches the amplifier. I'm guessing "too long" is +100ft of coax cable. 6) *IF* the coax cable length between the amplifier (assuming the splitter is in between) and TVs is long, the signal will degrade. Whether or not it is "too" degraded, you'll have to try it and see. That said, I have 75ft between the antenna and amplifier, 10ft between the amplifier and 3-way splitter, and 75ft between the splitter and TV. Works fairly well; however: the TV towers (I believe there are 3 in the general vicinity) are 45 miles away and depending on the weather, some stations become weak. But in the end, I am very happy to NOT be paying for cable/dish.
Question:	We have a 1996 rv with winegard batwing. would this plate be an upgrade? our current does have similar looking wall plate
Answer:	yes. never add an amp to an amplified antenna. something is going to burn out.
Question:	Yes, how do i install this? i do not need to connect but 1 tv. there is 4 lines coming out of wall. will this plug also charge a phone
Answer:	No. This is designed to work with non amplified antennas. You would burn out one the amps. Maybe both.
Question:	It says in the above specification that the "Item weight" is 30lbs? Is that a typo
Answer:	no, the amps would cancel each other out and probably cause a weaker signal. You cannot amplify an amplifier without causing damage. Sorry.

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Outdoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels that your antenna is already receiving. Low-noise amplification improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience.

Mounting hardware and step-by-step instructions are provided for simple installation for use with one TV or multiple TVs throughout your home. The durable, weather-resistant design allows you to place this amplifier with your antenna in the best location to minimize signal dropouts caused by interference from building materials and walls. The amplifier features input and output coax connections making it compatible with a wide range of antenna brands and models. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your outdoor non-amplified, passive TV antenna. Amplifiers will clear up any low-strength, fuzzy, or pixelated channels – in some cases, the number of channels you receive may change depending on your distance from the local broadcast towers.
• WEATHER RESISTANT DESIGN – Durable build is intended for outdoor installation and placement in the best location to minimize interference from building materials and walls. This amplifier can be mast-mounted, wall-mounted, or used indoors.
• EASY TO INSTALL – Includes power inserter, power supply, zip ties , rubber boot , and clear and simple-to-read user manual and installation instructions.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	How is the signal quality during bad weather including snow
Answer:	While snow does not have an effect, sometimes, but not often, atmospheric conditions make static when the FM station 65 miles away is in stereo. Switching off the stereo kills the static.
Question:	What are the dimensions of this item
Answer:	Dimensions 20" L x 9.2" W x 3.6" H
Question:	Will the antenna amplifier work on my non GE outdoor antenna? Can the antenna amplifier be indoors in a basement where the splitter is
Answer:	Hi RanJay, thank you for your question. Our amplifier is compatible to work with multiple antenna brands with RG6 F-Type coax cable. Yes, the antenna can be mounted both indoor and outdoor. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Does this antenna pick up vhf stations? this is important to me as most antennas today do only a weak job of it
Answer:	NO! It is excellent for UHF, but forget about VHF. I have a signal meter which shows 0 for signal strength for a VHF High band channel. The broadcast tower is the same distance away as other towers broadcasting UHF that is showing on my meter from 98 to 100! If you need VHF, forget this one. You should also check the changes to be made in your area, which could result in more VHF broadcasts in the near future.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to Power Inserter and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #29884 - sold separately)
• Coax Splitter (GE 33527 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

Product description

Winegard RV-7542 White Wall Plate Power Supply with Satellite and Cable Hookups for RV Antenna

• TV antenna power supply with cable input jack and built-in two set splitter
• Also equipped for input of satellite signal from external jack
• 12 per master carton
• Quick and easy to use

User questions & answers

Question:	Is this for 1 or 12 pcs
Answer:	Yes, it weighs only a quarter of a pound.
Question:	What’s the back look like
Answer:	I only use one antenna, which is located in my attic. During the installation of a new roof, the antenna rotated 45 degrees and I still get the same signal reading as when it was pointed in the direction of the signals. I am 30 to 50 miles from the source. I have it connected to 3 television sets.
Question:	Why does it only work for an hr then says no signal
Answer:	Antennas Direct DB4e Extended Range Antenna
Question:	Does this work with king antennas - such as the dish tailgater 4? i would think it does since the cable is the same
Answer:	FM trap "blocks" FM signal so that's not what you want. But this amp will amplify whatever FM is sent to it so you must have a VHF/FM antenna not just a UHF antenna.

Product description

Winegard FL5500A FlatWave Amped Digital HD Indoor Amplified TV Antenna: Watch local news, weather, live sports and all of the top-rated shows for free, in HD, and with Dolby Digital Surround Sound with the FlatWave Amped indoor amplified TV antenna. Cut the cord and save! The average home pays over $750 for cable in just one year. Did you know the average household receives 189 Tv channels with cable, but uses only 17 of them? Watch the TV you want without the big monthly TV bill. Cut the cord and watch the top-rated TV shows for free! In The Box: - FlatWave Amped digital indoor amplified TV antenna - Embedded low noise digital TV antenna amplifier - 18.5' mini coax cable attached to the TV antenna - 3' USB power cable with 110v adapter - Two 3M Command Brand strips Tech Specs - Indoor antenna range: 60 mile range - HD dual band VHF UHF TV antenna - Multi-directional TV antenna - Ultra-thin, 0.6lb weight - Amplified TV antenna dimensions: 13" x 12" Note: Run a channel scan after installation To receive programming run a channel scan on your TV after setting up the indoor antenna. To keep your channel line-up up-to-date, it is a good idea to run a channel scan monthly and anytime a channel is lost

• IMPORTANT NOTE: Please download the manual below the product descriptoin. The most advanced indoor antenna
• Embedded Ultra Low Noise Amplifier with Clear Circuit Technology (1.0 dB typical noise figure)
• Dual-band amplified HDTV reception up to 60 miles/Extra Long Quality Coax (18 ft)
• Energy saving USB power supply with LED power indicator,18.5′ mini coaxial cable (attached to antenna for better quality)
• Designed and made in the USA by Winegard, the antenna experts
• Power source type: Corded Electric
• 50 Mile Range, High Definition dual band VHF/UHF

User questions & answers

Question:	Has anyone compare this Amplied antenna to AmazonBasics Extreme Performance Ultra Thin Amplified Indoor HDTV Antenna in term of reception and range
Answer:	Update, April 2018. Newer design Clearstream Eclipse is sig better & just a little pricer, If passive works best for you. I live semi-rural 25miles West of Detriot. Have tried many major brand indoor antennas, Mohu Leaf, Wineguard, AmazonBasics, 1byOne, etc. After fresh channel scan, Eclipse took me from 18 channels (22 depending on weather & season) to very clear 28 channels!
Question:	Can the Wineguard FL5500A antenna be used without power amplifier Hooked up
Answer:	I have had this 2 years now and love it. I found hooking it up to power BEFORE the splitter coming into the house made all the difference. Hooking the power adapter inside house right before hooking into tv did not well at all. I would get 1 channel. With power adapter outside before my house splitter I pick up 60 channels.
Question:	I have a tv that doesnt have a usb connection. How can I use these antennas
Answer:	The antenna connects to the tv using the same type of connection as a cable wire, so a usb is not needed. If you are replacing cable with the antenna, you can actually use the cable wiring in your house to connect all of your tv's to one antenna. Put the antenna in the room at the highest point in the house. Get a 2 way cable splitter. One end goes to the tv in that room. The other end connects to the existing cable wire. Follow the existing cable wire to your basement or wherever the cable comes in to the house. Get a 5 way splitter (for up to 4 tv's). Connect the cable coming from the room with the antenna to the input of the 5 way splitter. Connect all of your other tv cables to the outputs of the 5 way splitter. You will then just need to change each tv to use air instead of cable. Be sure to buy quality splitters with gold ends.
Question:	is this antenna made in america
Answer:	Will this antenna work if I am 40 miles from the broadcast town.

Product features

Watch More Free HDTV!

FlatWave antennas provide the maximum content available in your area antennas capable of receiving both VHF and UHF signal from up to 60 miles away.

FlatWave amplified antennas feature Clear Circuit technology to give you the absolute best signal quality.

What Channels Will You Receive?

Free over-the-air programming has more options and more channels than ever before! Watch local news and weather, live sports, and all of your favorite shows. New multi-cast channels offer free movie channels and more!

Cut-the-Cord and Save

The average home pays over 750 for cable in just one year! Did you know that the average household receives 189 channels with cable, but uses only 17 of them.

Watch what you want without the big monthly bill. Cut-the-cord and watch the top-rated shows for free!

Product description

This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA48 provides a minimum of 0dB gain (which means no signal loss) on the low frequency end (54MHz) up to a +7.5db (approximately 5x signal gain) on the high end 1000MHz end. It improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
• Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
• Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

User questions & answers

Question:	What db Noise rating
Answer:	everything makes of noise some we can hear and some our ears are not sensitive enough to hear I believe they are giving you the the noise level that this produces but double check my answer
Question:	I'm not a tech by far so my question is the item has two connectors on the top so is that for a OTA antenna and an internet cable connection
Answer:	No - if you look at the picture, you can see the left connector is for powering the amplifier. the right connector is for signal input. You cannot connect cable and OTA at the same time.
Question:	Does this include the splitter (power injector) to be used with the power in/rf out port
Answer:	The remote power option is not included with this item. You can connect a cable up to 100' from the power supply.
Question:	how does this connect to the power adapter
Answer:	Any length of standard coax cable will work - no longer than 100'. We are working on a new kit with a"super flex" power cable so that you won't have to buy one - but the cables are still in production and won't be available for a while.

Product description

The Winegard Elite 7550 is capable of receiving both VHF and UHF signals from up to 70 miles away, receives FREE HD channels, and has an embedded amplifier with Clear Circuit technology to give you the absolute best signal quality.

One of the most compact, most powerful, best looking antenna design on the market with an integrated LTE filter to ensure the best reception even in the most populated urban environments.

Winegard is a leading US designer and manufacturer of quality antenna and signal reception equipment since 1954.

• Note : Antennas will vary with reception regarding the placement of the antenna, distance from the transmitting towers and ensuring the end user is properly running channel scans periodically, as well as every time the antenna is moved
• 70+ mile range to access from broadcast tower; receives free HD channels including ABC, CBS, NBC, PBS, Fox, Univision and more
• Embedded ultra low noise (1db) digital amplifier for the best antenna performance.Optimized for dual-band VHF/UHF reception
• o Includes antenna with embedded Boost ultra low noise amplifier, inline 5V power inverter, 3′ USB power cable with 110V adapter, and mounting bracket
• Directional, connects to multiple TVs

User questions & answers

Question:	Can this antenna be used in Canada? I'm about 100km from Plattsbourgh
Answer:	Hello, You can use the SDSB80111 for single phase 3 wire applications rated for 120/240VAC. Regards, Schneider Electric Customer Care.
Question:	Would mounting this in an attic with an insulated roof greatly impair the signal it receives
Answer:	80,000 according to their spec sheet
Question:	I live in a small house and am thinkin on going with the WE7550A . 40 miles closest tower, rolling hills, etc. 3 tvs 20' apart. additional amp needed
Answer:	Yes easy to install. You just need to mount the item to an appropriate surface, make sure the power is off before opening the service panel, and then correctly connect the wires to a double pole 20AMP breaker, as well as secure the ground wire to the grounding bus. Call a licensed electrician if you are unsure.
Question:	Is the elite 7550 antenna atsc 3.0 capable and ready for the new fcc transition for the final phase of july
Answer:	If one or two LEDs are out that indicates the breaker is no longer working and the circuits they supply must not be hot (useable). Check the two breakers with a voltage tester to be sure. Being in service for 12 years circuits may have seen the voltage spike and tripped the breaker. If they had been installed properly these two circuits would have fed voltage/current to circuits that were in use.

Product features

Cut the Cord and Watch More Free HDTV

Capable of receiving both VHF and UHF signals from up to 70 miles away, the compact Winegard Elite 7550 HDTV antenna allows you to access free over-the-air HDTV programming with long-range reception. It also features dual-band VHF/UHF reception for maximum signal capture, and can connect multiple TVs (splitter required, sold separately).

Product description

Winegard Company has been a leader in the design and manufacturing of quality antenna products since 1954. With over 1,000 different antenna models designed and 80 patents granted, Winegard has the solution for your antenna needs.

• Package Dimensions: 10.25 L x 5 H x 7.5 W (inches)
• Package Weight: 1.8 pounds
• Country of Origin : China
• Part Number: RV-7042

User questions & answers

Question:	We installed the new ra7296 amplifier and still don't 12 volts at the antenna. We have 12 volts at the amplifier and all the cable tested good
Answer:	That's what the aux/sat connection is for
Question:	How many amps does the booster pull
Answer:	There should be a fuse in the power center in your RV. Mine has one. There will likely be circuit breakers for the 110v circuits in your RV, and a bank of automotive style fuses for the 12volt system. It should be one of these fuses. may or may not be labeled, but you can figure it out with a test light.
Question:	What is the difference between the rv-7042 and rv
Answer:	I don’t know if it is an upgrade but replacing my old plate with this new one greatly improved reception.
Question:	How is this different then the RA
Answer:	To install the amplifier you will connect the antenna to the antenna in port on the back of the plate, and connect your TV to either the front output, or the TV 2 output on the back. This amplifier also needs to be wired to a 12v power source. It will charge a cell phone using a 12v charger.

Product description

Winegard Platinum Series HD7694P Long Range TV Antenna (Outdoor / Attic, 4K Ultra-HD Ready, ATSC 3.0 Ready, High-VHF / UHF) - 45 Mile Range HD Antenna

The HD7694P is the newest medium to long range amp;quot;yagiamp;quot; DTV antenna from Winegard Co. The HD7694P outperforms any antenna its size. It features exclusive retuning for UHF and VHF-Hi band only, which will bring you all HDTV and DTV channels from 7 - 69. VHF-Hi band is needed in 98% of 2009 DTV markets. This Winegard exclusive driven element configuration boosts DTV performance to unprecedented levels. The HD7694P employs a compact weather proof cartridge housing where the phasing lines are coupled to state of the art surface mount coupler board to ensure the most efficient transfer of digital signal.



Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

Boost your antenna with the Winegard Boost XT Digital HDTV Preamplifier. This preamplifier with TwinAmp technology separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.

• Long Range TV Antenna - The Winegard HD7694P outdoor HD TV antenna receives both High-VHF and UHF digital TV signals. Features high gain on both VHF and UHF frequencies for uninterrupted digital TV. Preceision mounted electronics for ultra efficient transfer of digital signal.
• 45 Mile Range - High-VHF and UHF directional TV antenna delivers 45 mile range. Mount outside for maximum range and clearest signal. For additional range and signal reliability amplify your antenna with the Winegard Boost XT LNA-200.
• Free TV Programming - Free ota programming has more options and more channels than ever before. Watch local news and weather, live sports, and all the top-rated shows for free with digital TV antenna. Pair the TV antenna with a streaming device for maximum HD programming.
• The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
• TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
• Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation

User questions & answers

Question:	What's the difference between the series
Answer:	Looks just like the one I took out of my camper. Matched perfect.
Question:	how long it is
Answer:	Check all wires, connections and coaxial cables to ensure they are tight and aren't intermittent when flexed. Do likewise at the antenna as there may be an intermittent connection at the antenna. If everything external checks out, it is likely that the Winegard RV-7542 is defective.

Product description

Find local HDTV programming fast and easy! The SensarPro can be customized for specific search modes, eliminating guesswork and frustration. Built-in amplification can give you up to 10dB of gain for increased performance or the ability to lower the gain when positioned near a tower. Adjustable audio feedback comes in handy when the wall plate is out of sight or reach.

• Brand: Winegard Company
• Part Number: RFL-332
• Sensar Pro Signal Meter Black

User questions & answers

Question:	Is there any other way to power this except hard-wired to a 12v line? maybe a battery method? i see there's something that looks like a mini usb input
Answer:	For the antenna only it pulls about 1.5amps. But you can use the 12v outlet with a device that uses a maximum of 8amps.
Question:	Does this eliminate the need for digital box
Answer:	According to a winegard pdf i found they are exactly the same, just the 0742 comes in a bulk pack. The pic i found looks the same too.
Question:	Will it work in a home HD antenna in the attic? My works good, not great , I like to boost the signal & view the signal strength
Answer:	http://www.markertek.com/Attachments/Specifications/Winegard/85412-Specifications.pdfIt appears that the 7042/0742 are made for amplified Winegard antennas, and the 7296 is made for the NON-amplified Winegard Sensar antennas.
Question:	In my area, digital channels share the same number like 30-1, 30-2 up to 30-5. How to setup that with this device? How dif analog vs digital works
Answer:	Yes

Product features

Scan, Seek and Channel Modes

Allows you to peak in signals prior to running a channel scan on your TV. Save time and watch your favorite shows in the absolute best signal quality possible.

Adjustable Amplifier

The SensarPro contains an adjustable amplifier to easily increase or decrease the gain with a press of a button. Increase for hard to get channels or decrease for overloaded signals close to your location for perfect reception.

Volume Feedback

The SensarPro's adjustable volume audio signal feedback, 100 point scale aiming system and U.S. specific signal focus makes your antenna easier to aim than ever before.

Technical Specifications

- Cables/Outputs Included: Antenna IN, Cable IN, TV1 OUT and TV2 OUT.

- Antenna Modes: Scan, Seek, Channel, Gain, and Volume.

Size and Weight

Height: 4.5 inch

Width: 2.75 inch

Depth: .76 inch

Unit weight: 0.18 pounds

FAQ

Q: How does the signal meter work?

A:The digital transition changed television in many ways. Manybroadcasters were forced to move from the frequency they had been using for years. When this happened, broadcasters fought to continue to call themselves by their old channel, even if they were using a different one to send their programming.

This means that many stations will broadcast on one channel but say they are another. For example, KWQC in Davenport, IA, calls itself channel 6 and appears as channel 6 on the television. However, when the digital transition took place, KWQC moved its broadcast frequency to channel 36. The computer in the television translates the information that KWQC sends to identify itself as channel 6.

This translation slows down the tuner in the television, making real time signal strength impossible to measure. For this reason, the SensarPro displays only the broadcast or RF channel number. Therefore, when looking for KWQC in Davenport, IA, set the SensarPro to channel 36 instead of 6.

Q: Can I replace my existing wall plate with the new SensarPro wallplate?

A: Yes, the SensarPro wallplate will replace your existing wall plate in four easy steps outlined in the SensarPro manual.

Q: What modes does the SensarPro offer?

A: Antenna mode is broken into five modes: Scan, Seek,Channel, Gain, and Volume. Each mode is designed to improve the process of finding and tuning in to quality broadcast television signals. Anytime the SensarPro is in one of these modes, both the antenna and the mode light will be lit.

Product description

Winegard MS-3005 Omni-Directional Outdoor TV Antenna: The Winegard MS-3005 MetroStar Digital 360 outdoor HDTV antenna is the ultimate cord-cutter antenna because of its slim size, built-in amp and 360 degree reception. The MS-3005 features: omnidirectional reception, built-in pre-amplifier, easy installation, low profile design, full 1080 HD, and 4K Ultra HD where available. The MS-3005 antenna is designed and manufactured in the USA. Watch local news, weather, live sports and all of the top-rated shows for free, in HD, and with Dolby Digital Surround Sound with the MS-3005 outdoor amplified TV antenna. Cut the cord and save! The average home pays over $750 for cable in just one year. Did you know the average household receives 189 Tv channels with cable, but uses only 17 of them? Watch the TV you want without the big monthly TV bill. Cut the cord and watch the top-rated TV shows for free! In The Box - MS-3005 MetroStar Antenna Head - Mounting Hardware - Power Supply - Injector Tech Specs - Antenna Range: 35 mile range - Omni-Directional, No Rotor Needed - HD dual band VHF UHF TV antenna - Antenna Dimensions: 14.88"w x 6"h - Antenna Weight: 2.8 lbs Note: Run a channel scan after installation To receive programming run a channel scan on your TV after setting up the antenna. To keep your channel line-up up-to-date, it is a good idea to run a channel scan monthly and anytime a channel is lost.

• The ultimate cord-cutter antenna because of its slim size, built-in amp and 360 degree reception.
• Omnidirectional Reception - Pick up signal from all directions, no rotor or pointing needed.
• Built-In Pre-Amplifier - Allows you to boost signal right at the antenna, making up for signal loss from long cable runs and splitters.
• Easy Installation - Install with simple hand tools on any antenna mast (mast not included).
• Low Profile Design - Meets HOA requirements, perfect for condos or homeowners association neighborhoods.
• Included components: Amplified Antenna Head, Mounting Hardware, Power Supply and Injector
• Power source type: Corded Electric

User questions & answers

Question:	can it be mounted upside down for attic installation
Answer:	I would connect it and move it around while someone watches signal strength on tv before mounting. Sometimes different building materials can affect it.
Question:	Can it be used in the attic
Answer:	Yes, be aware that attic mounting an outdoor antenna can reduce it's signal gain by up to 50%.
Question:	if i connect it to where my cable used to be that’s where it splits to all my tv’s .is there a power cord i need to plug-in out side
Answer:	The MS-3005 is an amplified antenna and requires power from the provided power inserter on the coax cable. When splitting signal that power inserter has to be installed between the splitter and the antenna for proper operation.
Question:	Does snow load impact the signal? If so, is there a heat mat attachment you can purchase
Answer:	I've had a foot or more of snow and haven't noticed any degradation in signal strength.