14 best tv amplifiers

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Indoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels. This low-noise amplifier boosts signal strength to compensate for cable loss and minimizes reception dropouts to strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees.

Compatible with all brands, the amplifier easily connects to the coax cable from your antenna and then attaches directly to your TV—twist-on connectors mean no tools are required for installation. This amplifier is perfect for any indoor passive antenna and is powered using the included AC power adapter. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
• LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.
• EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	how long is the power cord
Answer:	Hello Ermac, thank you for your question. Yes, as long as your Smart Roku TV has a coax port. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Has anyone tried using this to improve picture from an old game console (like an Atari2600 or Intellivision) that uses coax
Answer:	Hi Charles, thank you for your question. The GE UltraPro Traditional Indoor Antenna is rated to work within 30 miles of the broadcast source. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday through Friday at 1-800-654-8483. Thank you
Question:	How much does the amplifier boost the signal
Answer:	This antenna was created to work in a sitting position. However, most other antennas are made to stand up straight. We have not tested the reception from the suggested position. It could work fine but we cannot guarantee that.
Question:	most questions are about the antenna but, how well does the booster work - how many miles does it give, is it better than standard antenna boosters
Answer:	Hello Thomas H. , thank you for your question. The coax is cable is 4ft long.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to TV and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #43452 - sold separately)
• Universal Remote (GE 46195 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

Comes with an RG6 coax cable to help get you started right away.

For Best Results:

Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.

THE CIMPLE CO

All of our high quality products are brought to you by our Family owned and operated company.

We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.

Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

• Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
• Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
• Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
• Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
• Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

User questions & answers

Question:	Waterproof for outdoor use
Answer:	It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
Question:	what is the adjustable range
Answer:	does not include numbers just bigger or smaller range
Question:	Does the output go to the tv
Answer:	Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
Question:	I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
Answer:	We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.

Product description

The Channel Master Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 offers four amplified output ports allowing connectivity for up to four televisions without losing signal strength. Channel Master distribution amplifiers will work with all TV antenna installations. In addition, these HDTV signal amplifiers can be used with analog and digital RF distribution applications such as Cable TV where high performance and reliability are required.

The Ultra Mini 4 distribution amplifier is ideal for TV antenna installations with up to four televisions. Regular splitters will cause significant loss of signal strength which equates to poor picture quality, pixelation and channel dropouts. These amplifiers allow users to split and run their TV signal to multiple televisions in the home without risking a drop in signal strength.

The Ultra Mini HDTV Signal Amplifiers include a heavy-duty powder coated housing and weather-sealed ports allowing for indoor or outdoor installation in virtually any climate.

• Four Amplified Output Ports (8 dB)
• Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
• Miniature Size for Space-Saving Installations
• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

User questions & answers

Question:	Can this be used with an antenna preamp
Answer:	Yes, I have a preamp running in front of this device. Doing great. If you're asking if it can be used as an antenna preamp then no.
Question:	i have a horse trailer with a roof mounted digtal antenna. will this increase my reception power
Answer:	I'm guessing the other 2 respondents might be correct, but the only reason I bought this unit was to amplify the signal I get through Time Warner cable system. This unit is supposed to amplify a signal 15%. What I don't know is if it would amplify a signal through a roof mounted digital antenna. I only paid $15 for mine and it might be worth the gamble.
Question:	Can this item be used near the TV or does it have to go in the attic next to the antenna
Answer:	For the best performance it is better to locate the amplifier close to the antenna, not the TV. This maximizes the signal-to-noise ratio, which provides the best reception. In some cases it can be very inconvenient or impractical to place the amplifier close to the antenna, in which case you can try in a more convenient location. Maybe your results will be acceptable. But if performance is only so-so, you may want to make the effort to get the amplifier closer to the antenna. Other considerations: 1. If you get an amplifier don't be fooled into thinking that more "more dB gain is better". It's not necessarily. Very high gain amplifiers can be more prone to saturation and intermodulation, which can make your TV reception worse. 8-15dB gain probably should do the trick unless you've got other problems, such as... 2. a bad TV receiver; 3. a bad or inappropriate antenna. If you're using an old antenna that wasn't designed for digital TV, it may be better to replace the antenna than to add an amplifier to an old antenna that is digital TV compatible; 4. antenna coax cable that is too long or poor quality. Don't use crummy antenna cable. Don't use pitiful RG58. RG59 at least, with quad shield. If you're a real stud, you might consider RG6. And use good connectors. This may mean buying a good quality connector crimper, not some sorry piece of junk.
Question:	Can the dB gain ever be too much for a TV
Answer:	dB is a ratio, and without a reference, doesn't have a value. Signals from an antenna are almost always in the micro-volts. The 4 output amplifier has a gain of 8dB, which is about 2.5, so the likelihood of overloading the TV's input is low, and if you have enough signal to do that, you wouldn't need an amplifier.

Product features

4-Port HDTV Signal Amplifier

Channel Master has been at the forefront of over-the-air broadcast entertainment products and solutions, providing the highest quality and value to consumers since 1949. Headquartered in Chandler, Arizona (Phoenix), Channel Master offers a complete portfolio of over-the-air TV antennas, OTA DVR's, TV antenna mounting equipment, amplifiers, cables, connectors and more.

Ultra Mini 4

The Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 has four output ports and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.

What's Included

• Ultra Mini 4-Port TV Signal Amplifier

• Power Adapter

• 6ft RG6 Coaxial Cable

• User Guide

Features

• Four Amplified Output Ports (8dB)

• Works with all TV Antenna & CATV Installations

• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

• Miniature Size for Space-Saving Installations

• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

• Works With All Indoor or Outdoor TV Antennas - Can Be Installed Indoor, Outdoor or in Attic Due to its Compact Size and Heavy-Duty Weatherproof Housing
• Improves Signal Quality, Decreases Pixilation and May Increase Number of Channels
• Includes Built-in LTE Filter - Blocks Interference From 3G, 4G, 5G Smartphones and Transmitters with EMI & FM Out of Band Filtering (Does Not Pass FM Radio Signals to Avoid Over Amplification Issues)
• Includes Easy Push-Button Adjustable Amplification (17 dB/30 dB) with Flexible USB Powering Options
• Includes Built-in LTE Filter - Blocks Interference From 3G, 4G, 5G Smartphones and Transmitters with EMI & FM Out of Band Filtering (Does Not Pass FM Radio Signals to Avoid Over Amplification Issues)
• Trusted Quality: Channel Master Has Been Manufacturing TV Antennas, Amplifiers and Accessories Since 1949 While Offering Best of Class Warranty and Support

Product features

Amplify Adjustable Gain TV Antenna Amplifier

The Channel Master Amplify is an easy to install, professional-grade TV antenna amplifier designed to work with any television antenna to boost signal strength and improve signal quality. By doing so, this may lead to an increase in the number of television channels received by the antenna. Amplify's innovative circuitry is specifically built to support the newest digital and high definition broadcast standards.

Most people think more is better. This is not always the case when talking about TV antenna amplifiers. In many cases too much signal will do more harm than good to your overall signal and reception quality. The Channel Master Amplify eliminates the need for the user to be conscious about signal strength while still providing an ultra high 30dB of gain. With the inclusion of an easy push-button gain switch, you can easily switch back and forth between a high (30dB) and low (17dB) setting depending on your reception needs. [Note: When installed indoors directly behind a television set, Channel Master recommends using the low (17dB) setting.]

The Channel Master Amplify includes two flexible powering options. When installed indoors, the Amplify can be powered directly via the included USB power cube or by connecting the included USB cable to an open USB port on a television or set top device eliminating the need for connections directly to an electrical outlet. [Note: Not all USB ports will provide a sufficient amount of voltage to power the amplifier; you will need to ensure that your device's USB port supports a 5V 1.0A output.] When the Amplify is installed outdoors, it includes a USB power inserter which allows you to install the power adapter and power inserter inside your home near the television which injects power up to the amplifier over your existing coaxial cable.

The growth of LTE signal towers and connected LTE devices such as smart phones and tablets have become a common cause of intermittent television signal disruption. The reason being is that cell phone carrier companies operate on frequencies that can be very close to your broadcast TV frequencies. These disruptions can result in weak signals, pixilation or even channel loss, and can be especially disruptive when using an amplifier with your TV antenna. You won’t have to worry about this with the Channel Master Amplify. Built-in filters are designed to clear your OTA TV signal path from common interference including those created by mobile LTE signals.

If you are a consumer or less-experienced installer looking for a professional-grade TV antenna amplifier that provides a convenient installation yet robust quality and performance, look no further than the Channel Master Amplify.

PUSH-BUTTON GAIN SWITCH with STATUS LED LIGHT

• Push-Button Gain Switch Allows for Quick and Easy Adjustments Between High (30dB) and Low (17dB) Setting
• Status LED Light Tells What Gain the Amplifier is Set to
• Green Light is Low Gain and Red Light is High Gain

FLEXIBLE USB POWERING OPTIONS

• Indoor/Outdoor Powering Options
• For Indoor Installations, Power Directly with USB Cable via USB Power Cube or via an Open USB Port on a Television
• For Outdoor Installations, Power via USB Power Inserter Injecting Power up to the Amplifier Along the Existing Coaxial Cable

LTE & OUT-OF-BAND FILTERING

• Built-in LTE Filter Blocks Interference From 3G, 4G, 5G Smart Phones and Local Cellular Towers
• EMI & FM Out of Band Filtering

Die-Cast Metal Housing with Weatherproof Ports to Support Indoor and Outdoor Installations in Any Climate

Product description

The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain via a control on the front panel (up to 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made using standard F type connectors for the in/out ports. Contains a built in power supply that is designed to connect to a standard 120 volt/ 60hz AC outlet. An on/off status light is visible on the front panel.



Features:

• Enjoy the control of variable gain (with up to 25dB of gain) in VHF / UHF / FM bands.
• Low operation interference and minimal noise production & adjustment gain control
• Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB
• Heavy-duty metal housing with built-in mounting screw holes & power indicator light

Please note: When using this product a proper signal path must be established.



System With No Pre-Amplifier:

The SKY38323 must be installed immediately before any distribution splitter that supplies signals to your TV’s. The proper signal path is: Antenna> coax> amplifier> splitter> TV’s.



System With Pre-Amplifier:

The SKY38323 must be installed after the power inserter that supplies voltage to your preamp. Failure to do this correctly will block the DC voltage from getting to the preamp and you will have no picture. Also, you risk damaging the SKY38323. The proper signal path is : Antenna> preamp> coax> power inserter> amplifier> splitter> TV’s.



It is very important that your antenna is pointed correctly, all fittings are properly installed and that you have used the proper coax cable. RG-6 is the only cable we recommend for this purpose.

• Use this distribution amp to strengthen signal reception from antenna to TV
• This product should be installed by a qualified technician to ensure proper performance and suitability.
• This amplifier will increase or amplify a TV signal, however it cannot create or produce a TV signal.
• This amplifier is not designed to work with CABLE TV. It's sole purpose is to amplify TV signals ranging from 47 to 1000MHz.
• If you are not experienced with the distribution of a TV signal you should not purchase this item.

User questions & answers

Question:	Will this work with digital broadcast? I think digital broadcast is below 1GHz but not sure
Answer:	Worked on all the local digital feeds. Remember you need some signal to amplify.
Question:	i want to use this to boost my TV antenna digital signal. i was getting signals from 50 miles away, but lost it this summer? will this boost signal
Answer:	This Amp is used more to boost signal loss in systems with long cable/wire runs and where signal splitters are used for multiple tv locations to compensate for signal loss.It will boost signal levels but it may not bring in the channels that you lost.A lot of factors come into play like signal to noise ratios and the frequencies distance,terrain etc of I would say there is a chance you may pull in a few of channels that you are looking to re-gain.I’m not sure what type of antenna system you have.A decent outside antenna like a channel Master antenna and preamplifier would be highly recommend to start with if you are 15-20 miles away or more from broadcasting towers.
Question:	What is the noise figure
Answer:	For best results use a low noise preamplifier that is mounted very close to the antenna to keep the signal to noise ratio (SNR) as low as possible. You so not want a amplifier that does not state the noise factor and is located far from the antenna like this one as it increases the important SNR by amplifying any extraneous signals and intrinsic noise in the coax run from the antenna to the splitter and/or TV. Recommend the Winegard LNA-200, available on Amazon, for best results if amplification is needed. My background includes the courses Digital Wideband Evaluation, Satellite Communications Controller, Fixed Station Transmitter Repair, plus a Radio Telephone FCC license.
Question:	How well does it work for FM
Answer:	You may want to find one with a little lower SNR if your just doing FM.

Product description

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

• The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
• TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
• Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
• Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
• Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used

User questions & answers

Question:	Is there a powered splitter or something that would allow this product to work for placement in between the preamp and power inserter
Answer:	If you want to have a splitter between the preamp and the power inserted, you need to use a "power passing" splitter. I used this one from Amazon http://www.amazon.com/gp/product/B0018BN0UW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1. You may choose a different one depending on the number of connections you need at the splitter.
Question:	can this be used with Winegard FL6550A to strengthen the signal
Answer:	No. It has a built in preamp. I used this preamp with the FL6550A antenna and the channels I had dropped in half from 51 to 26. Actually makes the FL6550A antenna perform worse!
Question:	Can I use this to boost sig for 2 antennas: Clear Stream's DB4E UHF antenna PLUS C5 VHF antenna? Do I put the amp after the combiner
Answer:	I'll add my answer for future installers. I run two dual element antennas pointed in opposite directions and use TWO preamps -> then combine.If I were running two antennas for the purpose of band separation (UHF / VHF) - I might combine first then preamp. The BUMMER here - is that this is an EXCEPTIONAL unit with only 1db of noise. That means it outperforms other preamps that declare higher gains. This Wineguard amplifies the VHF and the UHF signals separately - which would make you ask - WHY ON GOD's GREEN EARTH would you NOT give us the ability to hook up separate UHF / VHF antenna feeds??There are preamps out there that do have separate inputs - RCA has a very popular unit around $20 but it won't perform as well as this overall. Id try FIRST - to combine at the mast- preamp and then distribute.If you don't like the results - you can ALWAYS add another preamp and change it to a preamp for each antenna then combine. What a shame though - since you would only be using half the capability of each preamp in the second scenario.
Question:	Will this booster improve (%) both signal strength & quality? Will it make the OTA CH's that are 100% (w/o amp) worse
Answer:	You have a given amount of tv signal present in the air, (assuming, your within range and elevation to capture a signal), also signals fluctuate according to temperature and moisture present in the atmosphere. So this is generally a constant changing thing that we have no control. Sometimes there are band openings that cause tv signals to behave in ways in both favorable and unfavorable depending on conditions that are present. Your digital TV tuner in your TV, in order to lock onto a signal, (that signal must be of high integrity and not out of phase). Generally the antennas of higher gain do better than cheap off the shelf small antennas (especially indoor/outdoor models). Also the inexpensive antenna systems that claim 150 or more mile range. All feedline has loss; some are better than others in this problem. The more loss in your TV feedline cable, will result in less tv signal reaching your TV tuner. RG-6 is a better grade than rg-59 resulting in better quantity of signal available to the tv tuner. Tv preamplifiers like this one, boost the signal level at the antenna location so as to compensate for the loss in your cable run to the tv tuner. Another issue is that you cannot amplify a signal without creating noise (distortion), in the signal. Some preamplifiers do their job by not creating so much noise in the signal. (The lower the noise, the better); regardless of gain figures although high gain does help. This unit is of good quality and has the added benefit of separate uhf/vhf antenna inputs for those who need to use single band tv antennas to achieve high results to specific applications. Your TV tuner can only lock onto a signal of high integrity. This unit is a good choice to help deliver that signal to the tuner, assuming everything else is in order. If multiple antennas are used for digital TV reception; they must be connected prior to being amplied, otherwise it will be out of phase and the tv can't lock onto signal like that. Hopefully, I have explained this so it's easier to understand. There is a science behind," how this works". Hope this advise has helped others. 73 and GOD bless K5EWM.

Product features

More Range, More Channels, Better TV Reception

Extend the range and signal quality of your non-amplified digital HDTV antenna with the LNA-200 Boost XT Outdoor Digital TV Antenna Amplifier. It features TwinAmp Technology, which separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.

This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation — maintaining the purest signal path possible.

Watch More Free HDTV Content

Winegard antennas provide the maximum content available in your area with antennas capable of receiving both VHF and UHF signals from up to 65 miles away.

Add a Winegard Boost XT Amplifier featuring Clear Circuit and TwinAmp technology to give you the absolute best signal quality.

Cut-The-Cord And Save

Watch what you want without the big monthly bill. Cut-the-cord and watch the top-rated shows for free.

Pair With A Streaming Device

Pair your antenna with a streaming device such as a Roku, Fire TV, or Chromecast for maximum programming (sold separately).

Watch your local news, weather, and live sports on your antenna and enjoy other TV shows and movies with services like Netflix, Amazon, or Hulu for a fraction of the cost (subscription required).

• [FreeView HDTV Channels] Say, Goodbye to Expensive Cable Bills! Enjoy hundreds of Free Top-Rated HDTV programming forever. Enjoy ABC, CBS, Fox, NBC, PBS, the Cw, Univision & more! Channel varieties include local news, weather, sitcoms, kids & sports. Cut the cord on your cable and enjoy these free channels. This one-time payment of fewer than 49 dollars can save you $80 - $212 Every month or $960 - $2544 A year. I'm sure you can think of a lot of valuable opportunities those savings can create.
• [Designed in USA] Our tv antenna engineered can be installed indoor or outdoor, especially for the USA & support the most powerful ranges on the market. Powered with an upgraded signal boosting amplifier. With 80+ miles of range, you have no issues in finding a variety of channels. Its game-changing modern design offers a reliable signal.
• [Modern Design] Our engineers in California made a perfect hi-tech modern design. Your new antenna will fit perfectly into any interior. You no longer need to hide Chinese awfully looking antennas. It's in the past. Give your home a modern look with this high-tech looking TV antenna. You could even get compliments from your friends when they come over for sports games on how nice your new device looks within your home.
• [Easy Setup] This simple plug and play device will leave you head-ache free. See the instructions below. We're sure with such simple instructions that even if you're not tech-savvy you can figure This out. No need to ask your kids or grandkids for help setting up your new toy.
• [24/7 Tech Support] we're confident you'll be satisfied with our product with all the money you will be saving per month. Our team is always working on bringing the highest quality and affordable products to the market. If you for any reason are having technical issues; please contact our 24/7 support. We're always happy to assist our customers and will walk you step by step through any issues.

User questions & answers

Question:	How can it claim to pickup channels that are 200+ miles away... far beyond the curvature of the Earth
Answer:	There are no mounting holes. Two-sided adhesive strips with velcro on a wall or window works best. Check the reception before attaching.
Question:	Is it a true outdoor antenna that can be exposed to the elements or must be covered / protected
Answer:	18.5' mini coax cable. 3' USB power supply line.
Question:	I see the coax cable is 18 feet, how long is the power cord
Answer:	Yes, it can be used without the amp being plugged into a usb or outlet. Mine works fine without using the amp because I live in the cities. I would not know the range though. But, if one lives outside the city, the amp will help bring in better reception.
Question:	Do you need an internet connection or wifi
Answer:	Indoor antennas - I am an expert. lol. 2 years ago gave up Directv and started a long process to find an acceptable indoor antenna. Last month I ordered my 5th. A refurbished Wingard FY-55YR It has a 50 mile range and would cost 3 times for a new version of it. All local channels come in consistently strong. Actually pick up around 8 new channels. Overall I get about 35 channels. I live about 45 miles from Portland Oregon, so the 50 mile range appears accurate.Broadcast channels plus Netflix, Hula and Amazon Prime give me more options than I could ever take advantage of. And my Roku makes navigating the streamer so easy. Bottom line I now save about $75 a month from my old Directv.

Product features

High Quality TV Antenna-Up to 200+miles Long Range Reception

Watch unlimited movies and TV episodes come to life in vibrant colors and detailed contrast through our newer indoor HD Antenna connected directly to your TV. Including local news, weather forecast and sitcoms, kids and sports programs, etc.

NOTE: BEFORE YOU BUY:

find channels that works in your area:

• dtv gov maps is run by the Consumer Electronics Association and the National Association of Broadcasters.The interface hasn’t changed in over a decade, but it’s simple and the information is useful.
• TVFool is more complex but gives a lot more detail including gorgeous plots of theoretical signal strength and where the broadcast towers are located.

And if you’re looking for a cable-style TV schedule, "TitanTV" is a free Web service that lists local programming.

MULTIPURPOSE

• ✔️FULL HD CHANNELS: With Our UPGRADED TV antenna no more need to pay a HUGE bill on TV. Our HD antenna can receive FULL HD Channels like ABC, CBS, NBC, PBC, Fox and SO MUCH MORE. With amplified tv antenna start to access all of the news, sitcoms, kids and sports programs! ADVANCED TOOL FOR LIFE TO RECEIVE THE CHANNEL WITHOUT MONTHLY BILL!
• ✔️FULL HD CRYSTAL-CLEAR TV & HD SOUND QUALITY: Our smart tv antenna adopts upgraded with new Generation Smart Switch control Powerful Amplifier Signal Booster with built-in Smart IC Chip Next generation & Crystal Clear Filter Technology to picks up signals within 180 miles range. The new technology filters out cellular and FM signals resulting in clearer picture, low noise and access to more free broadcast TV signals with enhanced gain, range and frequency performance.
• ✔️UP TO 180 MILES RANGE: The indoor HDTV antenna can reach up to 180 miles and can be placed almost anywhere in your Home. Digital antenna constantly scans for new channels as they're made available for broadcast. Hang the indoor antenna on a window or wall, or better position where owns better reception of your House.
• ✔️18 FT LONG COAXIAL CABLE & USB POWER ADAPTER: Makes amplified antenna easier for you to place it in your house to get the best reception, especially for customers whose televisions are quite far away from windows. Smart IC USB Power Adapter with built-in overvoltage protection will help if in your TV there is no USB output for connecting dtv antenna to the power supply.
• ✔️Our team of TV tech professionals is ready to help you with any problem. If you have problems with our HDTV Antenna, just contact us at any time and we will provide a full replacement or refund. Enjoy a high-quality product with confidence.
• ✔️Note: Always remember re-scan for channels after moving the Antenna. Visit - "dtv gov maps" information is useful.
• ✔️Note: Please switch the amplifier to "short range" if your house is very closer to the broadcast tower (within 35 Miles).

Product features

NEVER PAY YOUR CABLE or SATELLITE FOR TELEVISION AGAIN - YOU CAN GET ALL LOCAL CHANNELS in CRYSTAL CLEAR HD QUALITY!

Watch over 500,000 movies and TV episodes come to life in vibrant colors and detailed contrast through Our indoor HD Antenna connected directly to your TV. Including local news, weather forecast and sitcoms, kids and sports programs, etc.

No more triple-digit monthly bills! A ONE TIME purchase for less than 30 dollars can save you 80-212 dollars every month, adding up to 960-2544 dollars a year! This innovative Indoor Flat Digital Antenna is worth every cent you pay.

NOTE: BEFORE YOU BUY:

find channels that works in your area:

• dtv gov maps is run by the Consumer Electronics Association and the National Association of Broadcasters.The interface hasn’t changed in over a decade, but it’s simple and the information is useful.
• TVFool is more complex but gives a lot more detail including gorgeous plots of theoretical signal strength and where the broadcast towers are located.

And if you’re looking for a cable-style TV schedule, "TitanTV" is a Web service that lists local programming.

WATCH WHAT YOU WANT! NOTE:Cable channels are not available using the antenna, like ESPN.

Loads of Channels for Life!

The HDTV reception ensures that you always have the highest quality content.

Depending on your location, the HDTV antenna can receive include NBC, FOX, CBS, ABC, PBS, THE CW, QUBO, TELEMUNDO, UNIVISION, RTV, THIS TV, ION, ME TV, the weather channels and SO MUCH MORE.

Get access to all the content available in your area, including the most popular over-the-air TV shows, news, sitcoms, kids programs, sports and much more, all in breathtaking 4K Ultra HD for the best picture quality, most vivid colors and stunning sound.

Installs in less than 3 minutes! Just plug into your TV’s coaxial cable port, set your TV to antenna mode and scan for channels!

Our HD Antenna includes an intelligent Integrated Circuit (IC) chip, powerful amplifier signal booster and the most advanced CleanPeak Filter technology to insulate against cellular and FM interference and provide low-noise crystal-clear picture for 200+ miles channel reception!

• ✅For Local Channels: With our new TV antenna no more need to FACE a HUGE bill on TV. Enjoy hundreds of hdtv programming with no pixelation,including the news, sitcoms, kids and sports programs! amplified tv antenna can receive abc,cbs, nbc,pbs,fox, univision and more.
• ✅TV Antenna Range Reception: Our tv antenna with new type amplifier signal booster with built-in smart ic chip to picks up signals within 280 miles range. which provide added range and signal reception for more channels even you are far away form broadcast towers.
• ✅36ft Durable Coax Cable: With long quality coax cable ensures antenna can be placed anywhere in your home for the signal reception.This durable construction eliminates signal interference, increases antenna life .
• ✅Used Indoors Outdoors: Unique design black tv antenna made of high quality waterproof sunscreen materia. which can be arbitrarily matched your house design,you can attach it to window or wall(adhesive sticks),lay it flat on the table,also can hung it under the outdoor roof with the screws , which will enhance your signal reception.
• ✅Customer Service:IF you have any issues,please contact us at any time

User questions & answers

Question:	Does it work with fire stick
Answer:	Yes, you need antenna for each tv to get a better picture. I tried using just one antenna but it did not work. signal was weak to non-existent in another room. unless you want long cables running from living room to bedroom and to some other room, then one antenna is enough.
Question:	In regards to "need to go through tv setting, let tv to auto scan all channels." how is this done
Answer:	You can contact them at these following ways:1.Aft-Slae Email:[email protected] please cotact us at this email if there any issue about your tv antenna.2.Click Brand Name of HotCat, and get into storefront ,click "Ask Question"to get support form Seller.3.Login your amazon account> choose "Your orders"> find the order ID > click "Contact seller
Question:	can i place it in my attic
Answer:	You can check https://www.fcc.gov/media/engineering/dtvmaps
Question:	I live in the country. Will this work for me about 60 miles from the nearest stations
Answer:	You can contact them by Email: xftree126 @ .com

Product features

High Quality TV Antenna,Up to 280+miles Long Range Reception

• With our indoor outdoor TV Antenna, enjoying popular national TV networks and local TV shows !
• Whether you’re streaming in HD, 4K, or HDR, you’ll get picture quality that’s optimized for your TV with crisp details and rich color.

Can pull in your local news, weather, sitcom, kids and sports programming

the HDTV antenna can receive include NBC, FOX, CBS, ABC, PBS, THE CW, QUBO,

TELEMUNDO, UNIVISION, RTV, THIS TV, ION, ME TV, the weather channels and SO MUCH MORE.

3 Minutes Installation Time

• Just plug it in to your TV and let the antenna do all the work.
• Connect the coaxial cable through amplifier to digital receiver and Connect the Power Adapter's USB charging port. (package not including Adapter）
• Set your TV to antenna mode and scan for channels!
• Place the antenna on window or as high as possible.
• Scan for channels-Do this each time you try a new position for the antenna.
• If use a flat HDTV, Please go through your TV manual to make sure the TV has built-in tuner for free view or you have to install a extra freeview box.
• The HDTV reception ensures that you always have the quality content.

New Type Amplifier Signal Booster for Long Range Reception 280+miles

• Our tv antenna with new type amplifier signal booster with built-in smart IC chip to picks up signals within 280+ miles range.
• Please first visit antenna web or antenna point to check how many broadcast towers surrounding you.
• Enter your address into a website for channel listings in your location.
• You can get a better signal by moving the position of the antenna.
• Always re-scan channels after moving the hdtv antenna, the result may be better.
• The actual receivable range may highly dependents on your distance, location,the tower, terrain and weather.

Can be Used Outdoors / Indoors

• Extra long high performance coax cable ensures Antenna can be placed anywhere in your home for the signal and the reception.
• You can stick on the wall window, place on the table, even can be hanging outdaoors.
• This durable construction eliminates signal interference, increases antenna life and bring excellent signal reception.

HIGH-QUALITY DIGITAL ANTENNA

• Built-in Aerial amplifier boosts the TV antenna with better signal and optimizesreasonable condition.
• Enjoy stunning HD streaming and HDR at up to 65 fps for more vivid, true-to-life color and superior clarity.
• Can also receives UHF/VHF/FM signals and will broadcast both high definition and standard definition channels.

Warm Tips for You!

• Some sources of interference, such as air conditioners, refrigerators, hair dryers, and microwave ovenshave a certain effect on the effect of the TV Aerial receiving signals.
• Keep the HD antenna away from those high-power devices when using it.
• Areas with large obstructions such as valleys, mountains, etc, will reduce effective range.

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Outdoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels that your antenna is already receiving. Low-noise amplification improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience.

Mounting hardware and step-by-step instructions are provided for simple installation for use with one TV or multiple TVs throughout your home. The durable, weather-resistant design allows you to place this amplifier with your antenna in the best location to minimize signal dropouts caused by interference from building materials and walls. The amplifier features input and output coax connections making it compatible with a wide range of antenna brands and models. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your outdoor non-amplified, passive TV antenna. Amplifiers will clear up any low-strength, fuzzy, or pixelated channels – in some cases, the number of channels you receive may change depending on your distance from the local broadcast towers.
• WEATHER RESISTANT DESIGN – Durable build is intended for outdoor installation and placement in the best location to minimize interference from building materials and walls. This amplifier can be mast-mounted, wall-mounted, or used indoors.
• EASY TO INSTALL – Includes power inserter, power supply, zip ties , rubber boot , and clear and simple-to-read user manual and installation instructions.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	How is the signal quality during bad weather including snow
Answer:	While snow does not have an effect, sometimes, but not often, atmospheric conditions make static when the FM station 65 miles away is in stereo. Switching off the stereo kills the static.
Question:	What are the dimensions of this item
Answer:	Dimensions 20" L x 9.2" W x 3.6" H
Question:	Will the antenna amplifier work on my non GE outdoor antenna? Can the antenna amplifier be indoors in a basement where the splitter is
Answer:	Hi RanJay, thank you for your question. Our amplifier is compatible to work with multiple antenna brands with RG6 F-Type coax cable. Yes, the antenna can be mounted both indoor and outdoor. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Does this antenna pick up vhf stations? this is important to me as most antennas today do only a weak job of it
Answer:	NO! It is excellent for UHF, but forget about VHF. I have a signal meter which shows 0 for signal strength for a VHF High band channel. The broadcast tower is the same distance away as other towers broadcasting UHF that is showing on my meter from 98 to 100! If you need VHF, forget this one. You should also check the changes to be made in your area, which could result in more VHF broadcasts in the near future.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to Power Inserter and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #29884 - sold separately)
• Coax Splitter (GE 33527 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

• 【FreeView HDTV CHANNELS 】:Say NO to cable TV and Huge Bills! Enjoy hundreds of FREE TOP-RATED HDTV programming forever; including ABC, CBS, NBC, PBS, Fox, Univision and more .TV antenna with Built-in amplifierd is compatible with TV converter boxes and hundreds of digital tv.
• 【220+miles Range RECEPTION】Super distance reception, Up To 220 miles which provide added range and maximum signal reception for more channels even you are far away form broadcast towers.Support Format: 720p, 1080pi, 1080p/ATSC.
• 【19.68ft LONG HIGH QUALITY CABLE 】Extra long high performance coax cable ensures Antenna can be placed anywhere in your home for the best signal and the strongest reception.This durable construction eliminates signal interference, increases antenna life and bring excellent signal reception.
• 【Newest Design】2021 Newest powerful TV antenna with built-in amplifier ,and the new technology of cellular and FM signals can make the picture clearer.Place the TV antenna on a window or wall for the best results.which can be arbitrarily matched your house design, Which promise you enjoy hundreds of Crystal Clear Digital & HD shows even in thunderstorms.
• 【After Sale GUARANTEED】360 days Refund and Lifetime Warranty! If you have any issues with reception or bad signal feel free to contact us and get a refund or replacement.Our professional service team will provide you the best guaranteed support.

User questions & answers

Question:	How can I see if the antenna is good for my location
Answer:	Please try to put the antenna to a high location,like on the wall,better close to a window and no obstacle outside,trees,buildings etc Recommend mounting it to the window for the best result.
Question:	Will this work on tvs that are not 4k? I want to use this on my tv that isn’t a smart tv
Answer:	Works fine on my Sharp, which is 10 yrs old and not a "smart" tv.
Question:	My tv has only hdmi input ports, no coax cable ports at all. will this antenna need an additional device of some sort in order to plug into the tv
Answer:	On my tv it is not plugged into the HDMI plug. It's into the antenna plug. I'm not sure if you will need additional equipment. Go to the company's website and check or ask your questions. Sorry I can't be more helpful.
Question:	Will this work installed in the loft
Answer:	Of course it can be installed in the loft,but the signal depends on your geographical location exceeds signal coverage

Product features

High Quality TV Antenna-Up to 220+miles Long Range Reception

Newest Upgrade Version TV Antenna with Powerful built-in Amplifier.

Can pull in all of your local news, weather, sitcom, kids and sports programming without extra money.

Enjoy Crystal Clear HDTV Shows, 720p, 1080i, 1080p ATSC available.

Never Pay Expensive Cable or Satellite Fees Again!

Fast and Easy to Set Up

• Just plug it in to your TV and let the Aerial do all the work.
• Connect the coaxial cable through amplifier to digital receiver and Connect the Power Adapter's USB charging port.
• Place the antenna, on window or as high as possible.
• Scan for channels-Do this each time you try a new position for the antenna.
• If use a flat HDTV, Please go through your TV manual to make sure the TV has built-in tuner for free view or you have to install a extra freeview box.

New Type Amplifier -Long Range Reception-220 miles

• New Type Built-in Amplifier Signal Boosts with better signal and optimizes the most reasonable condition.
• Please first visit antenna web or antenna point to check how many broadcast towers surrounding you,
• Enter your address into a website such as tvfool or dtv.gov/maps for channel listings in your location.
• You can get a better signal by moving the position of the ANTENNA . The actual receivable range may highly dependents on your distance and location.

Upgraded Advanced Inline Amplifier

• Enjoy stunning HD streaming and HDR at up to 65 fps for more vivid, true-to-life color and superior clarity.
• Depending on your location, the hdtv antenna can receive include NBC, FOX, CBS, ABC, PBS, THE CW,QUBO,TELEMUNDO,UNIVISION, RTV, THIS TV, ION, ME TV and the weather channe

Digital HDTV Antenna

• Cut the cable and get access to HD programs forever including local news, weather forecast and sitcoms, kids and sports programs,etc.
• Enjoy crystal clear HDTV shows,720p,1080i,1080p,4K|ATSC available.
• Depending on your location, the hdtv antenna can receive include NBC, FOX, CBS, ABC, PBS, THE CW, QUBO, TELEMUNDO,UNIVISION, RTV, THIS TV, ION, ME TV and the weather channel.

Some Considerations

• Some sources of interference, such as air conditioners, refrigerators, hair dryers, and microwave ovenshave a certain effect on the effect of the TV Aerial receiving signals.
• Keep the HD antenna away from those high-power devices when using it.
• In addition, the signal strength will very depending on the tower, terrain and weather distance When using the Antenna.

Product description

Nippon America's UHF VHF FM Distribution Amplifier is perfect for indoor TV and FM antennas requiring more signal gain. It is suitable for all HDTV television broadcasts, as well as standard and HD FM.



Please Note: This will not boost or improve a bad/weak signal, it is made to compensate for signal loss from splitters and long cable runs.



Pick a spot in your television cable run where you can install the booster. A TV antenna signal booster is installed in-line that is, the cable must connect to the input and output of the booster. If you're only boosting the signal for one television, it's logical to install it near the television. If you're boosting signal for multiple televisions, choose a spot near your antenna line splitter.



Installation Note: TV amplifiers that have a power supply (such as this model) should be installed indoors, or in a location that will not be subject to any moisture. A booster should be installed as close as possible to the antenna, and before any coax cable splitters that may also be used.



NOTE ABOUT USE and POTENTIAL FOR STATION LOSS: A signal amplifier/booster will only improve a signal that is already present. This booster should work for any channel that is used by off-air TV stations. There are always situations where an amplifier does not help. If the station is particularly weak, but there are other very strong channels nearby, even radio stations, such radio station signals may block out other TV stations. This amplifier amplifies everything within the point where a local strong station could create interference that covers up the weak station you are attempting to receive.



If the station is particularly weak, and/or there is a long length of cable, or splitters to other TV’s between the antenna and this amplifier, certain channels may also be lost.

• UHF VHF FM Distribution Amplifier for TV/VCR
• 36dB Gain Control Signal Booster
• FM Trap / On-Off Indicator Light
• 1 Input / 1 Output

User questions & answers

Question:	Can anyone tell me if this diminishes vhf in favor of uhf? [the cda4 channel master does]
Answer:	This type of amplifier will boost EVERYTHING nearly equally -- VHF, FM, UHF, Cellphone "LTE" noise, etc.
Question:	What’s the in- out switch for
Answer:	Following info below is from Amazon's description on their web site. The switch is for the "FM Trap" function. I assume, but do not know, it compensates for FM interference when present. If used the same unit for 25 years and replaced it with the new model last week. It fixed my problem (dead or dying DA) and I am back in business. I have never used the FM Trap. I sometimes had it "IN" and sometimes "OUT" and could never see a difference. Product description Installation steps:1-Connect amplifier as per this diagram. 2-This amplifier can not be used with TiVo. 3-Performance varies from one location to another. 4-Adjusting the gain control clockwise increases your signal strength. 5-In most cases the FM trap should be set to the IN position. ● Switchable FM Trap ● 75 OHM Input ● 75 OHM Output ● 117V Power Source ● Lightning Protection ● Heavy Metal Case ● Low Noise ● Integrated Circuit ● Gain db ● 40 VHF- 36 UHF ● Noise Figure db ● Low 5.4- Hight 6.2-UHF 14 ● FM Trap Attenuation-20 db 95-108 MHz ● Adjustable Gain control Installation instructions: 1.Connect coaxial cable from antenna/ cable to amplifier input. 2.Connect coaxial cable form output to TV set. 3.If connecting more than one TV, use a splitter between amplifier output and TV. 4.Use gain control to increase signal (turn clockwise) or reduce signal (turn counter clockwise). 5.FM trap is used to eliminate FM interference. In most cases slide switch to (IN) position. 6.Red light indicates that the amplifier is plugged into 110 volt outlet. 7.Amplifier performance varies from one location to another. 8.This amplifier generally WILL NOT WORK WITH TIVO. 9.Check the back of amplifier package for specifications and installation diagram. 10. Works with cable modems. 11. Amplifies indoor/outdoor antenna and cable signals for best reception.
Question:	Can you install an amplified 8ch splitter into this? I.e. can you “stack” amplifiers
Answer:	I suppose you could but I wouldn’t. The risk is that the output of the first amplifier would be excessive to the input of the second. These amplifiers are designed for microvolts in and millivolts out. That’s a difference of a thousand times! My question is, Why would you want to if the splitter is already amplified?
Question:	Did you lose any channels before/after this amp
Answer:	My TV has a signal input on it and sometimes I would lose a channel because it was not strong enough. This amp boosted it so that does not happen.

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question:	May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer:	I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question:	If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer:	this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question:	Can this be mounted outdoors
Answer:	If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question:	Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer:	No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Product description

This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA48 provides a minimum of 0dB gain (which means no signal loss) on the low frequency end (54MHz) up to a +7.5db (approximately 5x signal gain) on the high end 1000MHz end. It improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
• Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
• Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

User questions & answers

Question:	What db Noise rating
Answer:	everything makes of noise some we can hear and some our ears are not sensitive enough to hear I believe they are giving you the the noise level that this produces but double check my answer
Question:	I'm not a tech by far so my question is the item has two connectors on the top so is that for a OTA antenna and an internet cable connection
Answer:	No - if you look at the picture, you can see the left connector is for powering the amplifier. the right connector is for signal input. You cannot connect cable and OTA at the same time.
Question:	Does this include the splitter (power injector) to be used with the power in/rf out port
Answer:	The remote power option is not included with this item. You can connect a cable up to 100' from the power supply.
Question:	how does this connect to the power adapter
Answer:	Any length of standard coax cable will work - no longer than 100'. We are working on a new kit with a"super flex" power cable so that you won't have to buy one - but the cables are still in production and won't be available for a while.