10 best cable signal boosters

Cable signal boosters, also known as cable amplifiers or signal amplifiers, are electronic devices designed to enhance the strength and quality of television signals received through cable television systems. They are related to TV antennas, audio-video accessories, and electronics, as they play a crucial role in improving the performance of cable TV reception. Here's what you need to know about cable signal boosters:

  1. Signal Enhancement: Cable signal boosters work by amplifying the incoming cable TV signal. This can be particularly helpful in situations where the signal strength is weak due to factors such as distance from the cable provider's distribution point, signal interference, or long cable runs within a building.

  2. Improved Picture and Sound Quality: By boosting the signal, these devices can significantly improve the picture and sound quality of your cable TV channels. You may notice fewer instances of pixelation, ghosting, or audio dropouts.

  3. Multiple Outputs: Some cable signal boosters come with multiple output ports, allowing you to distribute the boosted signal to multiple TVs or devices within your home without degrading the signal quality.

  4. Easy Installation: Many cable signal boosters are relatively easy to install. They typically require connecting the booster to your cable line and a power source. Some models also have built-in signal diagnostics to help you optimize the setup.

  5. Compatibility: It's essential to ensure that the cable signal booster you choose is compatible with your cable TV provider's signal frequencies and standards. Different providers may use different frequencies, so check the specifications before purchasing.

  6. Regulatory Compliance: Cable signal boosters are subject to regulations and should be certified by the Federal Communications Commission (FCC) in the United States. This certification ensures that the device meets certain technical standards and won't interfere with other communication systems.

  7. Outdoor and Indoor Models: Depending on your needs, you can find both outdoor and indoor cable signal boosters. Outdoor models are designed to be mounted on the exterior of your home or building, while indoor models are placed inside.

  8. Antenna Signal Boosters: In addition to cable TV signal boosters, there are also signal boosters designed for TV antennas.These devices help improve over-the-air (OTA) TV reception when using an antenna to receive broadcasts.

Cable signal boosters can be a valuable addition to your home entertainment setup, especially if you experience signal issues with your cable TV service. When choosing a cable signal booster, consider factors such as compatibility, the number of outputs needed, and any additional features that may be relevant to your specific situation.

Below you can find our editor's choice of the best cable signal boosters on the market
  

9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier with Active Return Zero Signal Loss VoIP Telephone Bypass Port and F59 Terminators Antronix VR900B/AC

Reliable Cable Products

Based on 486 reviews Check latest price

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question: May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer: I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question: If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer: this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question: Can this be mounted outdoors
Answer: If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question: Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer: No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package - cableTVamps

Reliable Cable Products

Based on 102 reviews Check latest price

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

  • The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
  • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question: Can just help with poor internet signal
Answer: Sorry, If dvd player attached to Surround AV Receiver
Question: It does work analog and digital antenna
Answer: No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv.
Question: will this work with my outdoor digital antenna
Answer: Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review
Question: I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me
Answer: If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future.

Arris 4-Port Cable, Modem, TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Active Return And Coax Cable Package - cableTVamps

Based on 131 reviews Check latest price

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-AR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-AR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. An Active Return Path is provided for continuity. The BDA-42-4-AR-R is and upgrade and replaces the former K-4 1-Port Signal Amplifier. The BDA-42-4-AR-R is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic. Includes Coax Cable And Detailed Installation Instructions

  • The BDA-42-4-AR-R is a bi-directional active return cable TV amplifier designed for use in homes. Boosts signal by 5x forward, 2x reverse. It is Manufactured by Arris.
  • An active return path boosts upstream signal for broadband devices such as set-top boxes and cable modems. Active return is recommended when Upstream Modem power level is greater than 48 dBmV.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH ANTENNAS. Active return amplifiers should not be used with antennas, and may cause total loss of OTA signals.

User questions & answers

Question: Is this product ok for installation in a warm attic (phoenix, az)? is there an operating room temperature range
Answer: There are four connectors on the device (all coaxial rf f type ) . 1 for power, 1 for the input and the advertised 2 outputs. Essentially this is an amplified splitter with 2 outputs.
Question: Will this increase my internet download speed if I connect the coaxial from my inside wall to this device, then connect this directly to my modem
Answer: Not sure you’ll have to try beginning and end to see which works better. I have mine at beginning of long run. But I’m not a cable expert.
Question: Does it act like a splitter
Answer: Yes, or you could simply purchase the 4-port model, which is a bit cleaner.
Question: Will this help improve my signal on a channel master cm-2016 high vhf,uhf & hdtv outdoor hd antenna to boost my signal and run 3 tvs
Answer: Yes, since it is consuming power it will generate some heat and become warm to the touch. It can be used in hot environments up to + 60 degrees C.

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Coax Cable, F59 Terminators (Antronix MRA4-8)

Based on 204 reviews Check latest price

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" coaxial cable and two 75-ohm port terminators.

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

User questions & answers

Question: What is an arpi2000 power inserter
Answer: A way to power the amp, but since this package comes with a DC power supply, and has a place to connect the supply with the provided cable, you don't need a power inserter.
Question: The install mentions a grounding wire. Does this device need to be grounded to work? Thanks
Answer: Grounding is recommended. Grounding can protect the device from surges or perhaps lightning strikes. Consult with an electrician for proper means of grounding.
Question: Will this work to boost internet signal? i don't have cable tv - our house is about 300 ft from the road and that seems to degrade our internet speed
Answer: If you have cable internet (only) you would like be better off with an "active return " amplifier. The only way to really know that for sure would be to check your cable modem for proper signal levels. I would not buy this if you're specifically trying to boost cable internet.
Question: How long is the power cord
Answer: Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

Arris 1-Port Cable, Modem, TV, OTA, HDTV Amplifier Signal Booster with Passive Return and Coax Cable Kit

Based on 57 reviews Check latest price

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-1-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifier will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-1 Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

  • The BDA-42-1-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 32x in the forward path
  • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" connection cable included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question: Is this amplifier compatable with cable internet service
Answer: I don’t know. It’s purpose is to boost the signal at the point of contact. So when the cable enters the amplifier the signal can travel further distance before arriving at the TV without loss of signal strength
Question: Does this boost your return signal
Answer: Passive Return = no return boost.
Question: Im not getting my sattelite to work through our camper hook up for sattelite...will this get my signal to recieve so i dont have to run cable inside t
Answer: I'M NOT SURE. I HAVE THIS UNIT CONNECTED TO AN OUT DOOR TV ANTENNA. WORKS WELL AS LONG AS THE ANTENNA IS IN THE RIGHT LOCATION TO RECIEVE THE TV SIGNALS.
Question: What is the gain in db, of this unit. I have a 15db amplifier now and I need a bit more
Answer: 10-15 dB gain depends upon the frequency range.

Arris 2-Port Cable, Modem, TV, OTA, HDTV Amplifier Splitter Signal Booster with Passive Return and Coax Cable Kit

Based on 29 reviews Check latest price

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-2-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifir will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-2 2-Port Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

  • The BDA-42-2-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 12x in the forward path.
  • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question: Would this work with moca 2.0 bonded devices
Answer: This doesn't contain a tube power amp. The tubes are only a preamp.
Question: How do you connect remote power to output 1 with the plug-in power supply included? I would think I need a power inserter
Answer: Any load from 4 Ohms to 16 Ohms is safe with this amplifier.
Question: The instructions say to "terminate unused ports with 75ohms for optimum rf performance". what would count as 75ohm terminator and is this a must
Answer: Amplifiers having fans are built with them for a reason. I wouldn't recommend disconnecting it.
Question: will this device work with my internet coax cable
Answer: Yes

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer with Passive Return, F59 Terminators (Lindsay LSA84-EQ8)

Based on 225 reviews Check latest price

Product description

This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA48 provides a minimum of 0dB gain (which means no signal loss) on the low frequency end (54MHz) up to a +7.5db (approximately 5x signal gain) on the high end 1000MHz end. It improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
  • Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

User questions & answers

Question: What db Noise rating
Answer: everything makes of noise some we can hear and some our ears are not sensitive enough to hear I believe they are giving you the the noise level that this produces but double check my answer
Question: I'm not a tech by far so my question is the item has two connectors on the top so is that for a OTA antenna and an internet cable connection
Answer: No - if you look at the picture, you can see the left connector is for powering the amplifier. the right connector is for signal input. You cannot connect cable and OTA at the same time.
Question: Does this include the splitter (power injector) to be used with the power in/rf out port
Answer: The remote power option is not included with this item. You can connect a cable up to 100' from the power supply.
Question: how does this connect to the power adapter
Answer: Any length of standard coax cable will work - no longer than 100'. We are working on a new kit with a"super flex" power cable so that you won't have to buy one - but the cables are still in production and won't be available for a while.

24db Distribution Amplifier - Digital TV Antenna Booster Signal Amplifier, Adjustable Boost/Gain, NTSC, ATSC, FM, UHF, VHF - 1000 MHz - Includes RG6 Coaxial Cable

THE CIMPLE CO

Based on 204 reviews Check latest price

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

  • Comes with an RG6 coax cable to help get you started right away.




    • For Best Results:
  • Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.




    • THE CIMPLE CO
  • All of our high quality products are brought to you by our Family owned and operated company.
  • We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.
  • Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

    • Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
    • Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
    • Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
    • Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
    • Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

    User questions & answers

    Question: Waterproof for outdoor use
    Answer: It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
    Question: what is the adjustable range
    Answer: does not include numbers just bigger or smaller range
    Question: Does the output go to the tv
    Answer: Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
    Question: I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
    Answer: We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.

    9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier Kit with Active Return Zero Signal Loss VoIP Telephone Bypass Port Includes F59 Terminators and 3' Custom Dedicated Power Cable

    Based on 41 reviews Check latest price

    Product description

    The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply, F59 Terminators, and custom 3 foot Reliable Superflex power cable are included.

    • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
    • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
    • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
    • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
    • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Complete kit includes Amplifier, Power Supply, three F59 terminators and Reliable Cable Superflex power connection cable.

    User questions & answers

    Question: Can this be used with Verizon Fios
    Answer: The gain tapers off at 1002Mhz. That is good for cable modems that are DOCSIS 3.0 and below. If you have a DOCSIS 3.1 modem, the frequency range extends to 1800Mhz. You will have reduced performance for the latest cable modems.

    36 DB Cable Antenna Color TV Booster Signal Amplifier VHF UHF FM HDTV

    Based on 351 reviews Check latest price

    Product description

    Nippon America's UHF VHF FM Distribution Amplifier is perfect for indoor TV and FM antennas requiring more signal gain. It is suitable for all HDTV television broadcasts, as well as standard and HD FM.



    Please Note: This will not boost or improve a bad/weak signal, it is made to compensate for signal loss from splitters and long cable runs.



    Pick a spot in your television cable run where you can install the booster. A TV antenna signal booster is installed in-line that is, the cable must connect to the input and output of the booster. If you're only boosting the signal for one television, it's logical to install it near the television. If you're boosting signal for multiple televisions, choose a spot near your antenna line splitter.



    Installation Note: TV amplifiers that have a power supply (such as this model) should be installed indoors, or in a location that will not be subject to any moisture. A booster should be installed as close as possible to the antenna, and before any coax cable splitters that may also be used.



    NOTE ABOUT USE and POTENTIAL FOR STATION LOSS: A signal amplifier/booster will only improve a signal that is already present. This booster should work for any channel that is used by off-air TV stations. There are always situations where an amplifier does not help. If the station is particularly weak, but there are other very strong channels nearby, even radio stations, such radio station signals may block out other TV stations. This amplifier amplifies everything within the point where a local strong station could create interference that covers up the weak station you are attempting to receive.



    If the station is particularly weak, and/or there is a long length of cable, or splitters to other TV’s between the antenna and this amplifier, certain channels may also be lost.

    • UHF VHF FM Distribution Amplifier for TV/VCR
    • 36dB Gain Control Signal Booster
    • FM Trap / On-Off Indicator Light
    • 1 Input / 1 Output

    User questions & answers

    Question: Can anyone tell me if this diminishes vhf in favor of uhf? [the cda4 channel master does]
    Answer: This type of amplifier will boost EVERYTHING nearly equally -- VHF, FM, UHF, Cellphone "LTE" noise, etc.
    Question: What’s the in- out switch for
    Answer: Following info below is from Amazon's description on their web site. The switch is for the "FM Trap" function. I assume, but do not know, it compensates for FM interference when present. If used the same unit for 25 years and replaced it with the new model last week. It fixed my problem (dead or dying DA) and I am back in business. I have never used the FM Trap. I sometimes had it "IN" and sometimes "OUT" and could never see a difference. Product description Installation steps:1-Connect amplifier as per this diagram. 2-This amplifier can not be used with TiVo. 3-Performance varies from one location to another. 4-Adjusting the gain control clockwise increases your signal strength. 5-In most cases the FM trap should be set to the IN position. ● Switchable FM Trap ● 75 OHM Input ● 75 OHM Output ● 117V Power Source ● Lightning Protection ● Heavy Metal Case ● Low Noise ● Integrated Circuit ● Gain db ● 40 VHF- 36 UHF ● Noise Figure db ● Low 5.4- Hight 6.2-UHF 14 ● FM Trap Attenuation-20 db 95-108 MHz ● Adjustable Gain control Installation instructions: 1.Connect coaxial cable from antenna/ cable to amplifier input. 2.Connect coaxial cable form output to TV set. 3.If connecting more than one TV, use a splitter between amplifier output and TV. 4.Use gain control to increase signal (turn clockwise) or reduce signal (turn counter clockwise). 5.FM trap is used to eliminate FM interference. In most cases slide switch to (IN) position. 6.Red light indicates that the amplifier is plugged into 110 volt outlet. 7.Amplifier performance varies from one location to another. 8.This amplifier generally WILL NOT WORK WITH TIVO. 9.Check the back of amplifier package for specifications and installation diagram. 10. Works with cable modems. 11. Amplifies indoor/outdoor antenna and cable signals for best reception.
    Question: Can you install an amplified 8ch splitter into this? I.e. can you “stack” amplifiers
    Answer: I suppose you could but I wouldn’t. The risk is that the output of the first amplifier would be excessive to the input of the second. These amplifiers are designed for microvolts in and millivolts out. That’s a difference of a thousand times! My question is, Why would you want to if the splitter is already amplified?
    Question: Did you lose any channels before/after this amp
    Answer: My TV has a signal input on it and sometimes I would lose a channel because it was not strong enough. This amp boosted it so that does not happen.

    Latest Reviews

    View all