11 best amplifier cables

• [Low Noise High Fidelity] New bee guitar cord with 22AWG oxygen-free-copper center conductors provides enhanced signal transfer, the PVC insulation material and the high-density stranded copper double shield provide noise rejection for quiet operation
• [Ideal for Choice] New bee 1/4 straight and right angle metal connectors, ensures a secure connection in any instrument, pedal, or amp jack. L shape great fro on stage guitar stands.
• [Wide Compatible] Suitable for mixer, power amplifier, microphone, effector, decoder, equalizer, electoronic organ, electric guitar, electric bass and other electronic equipments. Widely used in the installation of smart home, karaoke speaker, professional stage audio, etc.
• [Easy Disassemble] Making incidental repairs quick and easy! Very nice, flexible cable!
• [High Quality & Warranty] High purity OFC core of cable, Black Tweed Woven Jacket with 7mm(0.27 inch) outer diameter, brings the cable strong and durable construction.

User questions & answers

Question:	Will this right angle cord work with a Fender Telecasters socket
Answer:	I believe you can use the straight end in the instrument and the “L” in the input port on your audio mixer/DI box/etc if there is an issue with a given instrument - gives you the option otherwise
Question:	Is the jacket as flexible as rubber
Answer:	Much better than rubber
Question:	Will these work with a ukelele
Answer:	yes most instruments use the same size cable
Question:	What is the warranty on this cord
Answer:	3 YEAR WARRANTY

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question:	May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer:	I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question:	If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer:	this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question:	Can this be mounted outdoors
Answer:	If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question:	Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer:	No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

• The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Can just help with poor internet signal
Answer:	Sorry, If dvd player attached to Surround AV Receiver
Question:	It does work analog and digital antenna
Answer:	No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv.
Question:	will this work with my outdoor digital antenna
Answer:	Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review
Question:	I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me
Answer:	If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future.

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-2-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifir will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-2 2-Port Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

• The BDA-42-2-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 12x in the forward path.
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Would this work with moca 2.0 bonded devices
Answer:	This doesn't contain a tube power amp. The tubes are only a preamp.
Question:	How do you connect remote power to output 1 with the plug-in power supply included? I would think I need a power inserter
Answer:	Any load from 4 Ohms to 16 Ohms is safe with this amplifier.
Question:	The instructions say to "terminate unused ports with 75ohms for optimum rf performance". what would count as 75ohm terminator and is this a must
Answer:	Amplifiers having fans are built with them for a reason. I wouldn't recommend disconnecting it.
Question:	will this device work with my internet coax cable
Answer:	Yes

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-AR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-AR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. An Active Return Path is provided for continuity. The BDA-42-4-AR-R is and upgrade and replaces the former K-4 1-Port Signal Amplifier. The BDA-42-4-AR-R is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic. Includes Coax Cable And Detailed Installation Instructions

• The BDA-42-4-AR-R is a bi-directional active return cable TV amplifier designed for use in homes. Boosts signal by 5x forward, 2x reverse. It is Manufactured by Arris.
• An active return path boosts upstream signal for broadband devices such as set-top boxes and cable modems. Active return is recommended when Upstream Modem power level is greater than 48 dBmV.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH ANTENNAS. Active return amplifiers should not be used with antennas, and may cause total loss of OTA signals.

User questions & answers

Question:	Is this product ok for installation in a warm attic (phoenix, az)? is there an operating room temperature range
Answer:	There are four connectors on the device (all coaxial rf f type ) . 1 for power, 1 for the input and the advertised 2 outputs. Essentially this is an amplified splitter with 2 outputs.
Question:	Will this increase my internet download speed if I connect the coaxial from my inside wall to this device, then connect this directly to my modem
Answer:	Not sure you’ll have to try beginning and end to see which works better. I have mine at beginning of long run. But I’m not a cable expert.
Question:	Does it act like a splitter
Answer:	Yes, or you could simply purchase the 4-port model, which is a bit cleaner.
Question:	Will this help improve my signal on a channel master cm-2016 high vhf,uhf & hdtv outdoor hd antenna to boost my signal and run 3 tvs
Answer:	Yes, since it is consuming power it will generate some heat and become warm to the touch. It can be used in hot environments up to + 60 degrees C.

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-1-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifier will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-1 Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

• The BDA-42-1-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 32x in the forward path
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" connection cable included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Is this amplifier compatable with cable internet service
Answer:	I don’t know. It’s purpose is to boost the signal at the point of contact. So when the cable enters the amplifier the signal can travel further distance before arriving at the TV without loss of signal strength
Question:	Does this boost your return signal
Answer:	Passive Return = no return boost.
Question:	Im not getting my sattelite to work through our camper hook up for sattelite...will this get my signal to recieve so i dont have to run cable inside t
Answer:	I'M NOT SURE. I HAVE THIS UNIT CONNECTED TO AN OUT DOOR TV ANTENNA. WORKS WELL AS LONG AS THE ANTENNA IS IN THE RIGHT LOCATION TO RECIEVE THE TV SIGNALS.
Question:	What is the gain in db, of this unit. I have a 15db amplifier now and I need a bit more
Answer:	10-15 dB gain depends upon the frequency range.

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

User questions & answers

Question:	If I have to run 15' of RG6 coax to the power port, will this affect the operation of this unit
Answer:	According to data I received on this amp it can be run out to a PA.
Question:	Can I split the signal coming out of one output
Answer:	You could play a bass through it but it was definitely designed for electric guitar. I believe orange makes bass amps.
Question:	Will this work, with a digital tv antenna
Answer:	No discreet remote available as far as I know. Your phone or tablet with the Spark app, however, works as a full function remote, controlling and overriding every knob on the amp. The app also gets you over 10,000 downloadable tones. Great amp for practice and small venues. Much more than I expected.
Question:	So the adapter plugs into a wall outlet and connects with a coaxial cable to the amplifier and the amplifier connects between an antenna and the TV
Answer:	Yep. It’s the same. I had to order this bc they wouldn’t ship to AK.

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" coaxial cable and two 75-ohm port terminators.

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

User questions & answers

Question:	What is an arpi2000 power inserter
Answer:	A way to power the amp, but since this package comes with a DC power supply, and has a place to connect the supply with the provided cable, you don't need a power inserter.
Question:	The install mentions a grounding wire. Does this device need to be grounded to work? Thanks
Answer:	Grounding is recommended. Grounding can protect the device from surges or perhaps lightning strikes. Consult with an electrician for proper means of grounding.
Question:	Will this work to boost internet signal? i don't have cable tv - our house is about 300 ft from the road and that seems to degrade our internet speed
Answer:	If you have cable internet (only) you would like be better off with an "active return " amplifier. The only way to really know that for sure would be to check your cable modem for proper signal levels. I would not buy this if you're specifically trying to boost cable internet.
Question:	How long is the power cord
Answer:	Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

Product description

The Channel Master Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 offers four amplified output ports allowing connectivity for up to four televisions without losing signal strength. Channel Master distribution amplifiers will work with all TV antenna installations. In addition, these HDTV signal amplifiers can be used with analog and digital RF distribution applications such as Cable TV where high performance and reliability are required.

The Ultra Mini 4 distribution amplifier is ideal for TV antenna installations with up to four televisions. Regular splitters will cause significant loss of signal strength which equates to poor picture quality, pixelation and channel dropouts. These amplifiers allow users to split and run their TV signal to multiple televisions in the home without risking a drop in signal strength.

The Ultra Mini HDTV Signal Amplifiers include a heavy-duty powder coated housing and weather-sealed ports allowing for indoor or outdoor installation in virtually any climate.

• Four Amplified Output Ports (8 dB)
• Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
• Miniature Size for Space-Saving Installations
• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

User questions & answers

Question:	Can this be used with an antenna preamp
Answer:	Yes, I have a preamp running in front of this device. Doing great. If you're asking if it can be used as an antenna preamp then no.
Question:	i have a horse trailer with a roof mounted digtal antenna. will this increase my reception power
Answer:	I'm guessing the other 2 respondents might be correct, but the only reason I bought this unit was to amplify the signal I get through Time Warner cable system. This unit is supposed to amplify a signal 15%. What I don't know is if it would amplify a signal through a roof mounted digital antenna. I only paid $15 for mine and it might be worth the gamble.
Question:	Can this item be used near the TV or does it have to go in the attic next to the antenna
Answer:	For the best performance it is better to locate the amplifier close to the antenna, not the TV. This maximizes the signal-to-noise ratio, which provides the best reception. In some cases it can be very inconvenient or impractical to place the amplifier close to the antenna, in which case you can try in a more convenient location. Maybe your results will be acceptable. But if performance is only so-so, you may want to make the effort to get the amplifier closer to the antenna. Other considerations: 1. If you get an amplifier don't be fooled into thinking that more "more dB gain is better". It's not necessarily. Very high gain amplifiers can be more prone to saturation and intermodulation, which can make your TV reception worse. 8-15dB gain probably should do the trick unless you've got other problems, such as... 2. a bad TV receiver; 3. a bad or inappropriate antenna. If you're using an old antenna that wasn't designed for digital TV, it may be better to replace the antenna than to add an amplifier to an old antenna that is digital TV compatible; 4. antenna coax cable that is too long or poor quality. Don't use crummy antenna cable. Don't use pitiful RG58. RG59 at least, with quad shield. If you're a real stud, you might consider RG6. And use good connectors. This may mean buying a good quality connector crimper, not some sorry piece of junk.
Question:	Can the dB gain ever be too much for a TV
Answer:	dB is a ratio, and without a reference, doesn't have a value. Signals from an antenna are almost always in the micro-volts. The 4 output amplifier has a gain of 8dB, which is about 2.5, so the likelihood of overloading the TV's input is low, and if you have enough signal to do that, you wouldn't need an amplifier.

Product features

4-Port HDTV Signal Amplifier

Channel Master has been at the forefront of over-the-air broadcast entertainment products and solutions, providing the highest quality and value to consumers since 1949. Headquartered in Chandler, Arizona (Phoenix), Channel Master offers a complete portfolio of over-the-air TV antennas, OTA DVR's, TV antenna mounting equipment, amplifiers, cables, connectors and more.

Ultra Mini 4

The Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 has four output ports and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.

What's Included

• Ultra Mini 4-Port TV Signal Amplifier

• Power Adapter

• 6ft RG6 Coaxial Cable

• User Guide

Features

• Four Amplified Output Ports (8dB)

• Works with all TV Antenna & CATV Installations

• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

• Miniature Size for Space-Saving Installations

• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

Comes with an RG6 coax cable to help get you started right away.

For Best Results:

Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.

THE CIMPLE CO

All of our high quality products are brought to you by our Family owned and operated company.

We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.

Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

• Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
• Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
• Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
• Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
• Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

User questions & answers

Question:	Waterproof for outdoor use
Answer:	It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
Question:	what is the adjustable range
Answer:	does not include numbers just bigger or smaller range
Question:	Does the output go to the tv
Answer:	Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
Question:	I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
Answer:	We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.