10 best 110v bilge pumps

Product description

The pump’s versatile design makes it the perfect solution to remove water from basements, garages, stairwells, utility rooms, backyards, sumps and for other utility applications. It features an improved unibody housing that is corrosion proof and reduces potential leak paths. The pump features a powerful 1800 GPH motor that only consumes 100 watts, while delivering up to 1800 gallons per hour. Available in non-automatic & automatic versions utilizing standard 110 volt AC current.

• A genuine Rule product, don't settle for anything less
• Designed to remove water from basements, garages, stairwells, utility rooms, and other utility applications, compact, efficient, long-life motor
• Totally submersible, silent and vibration free operation, rust and corrosion proof, snap-off strainer for easy cleaning
• Heavy-duty thermoplastic housing protects pump from the most adverse conditions
• Using this pump as a pool cover pump voids the warranty, it should not be used to prevent water from accumulating on top of a pool cover
• Never runs dry, turns off automatically when pumping is complete or if impeller becomes jammed

User questions & answers

Question:	Does the stated base width of 4" include the discharge spout that's sticking out on the side
Answer:	Yes, as long as the single end has a really good ground to start with. If not, it will get worse as you split out to 3.
Question:	Hi, what is the warranty on this pump? Thanks
Answer:	It should not impact your sound quality, I have one and it works perfectly
Question:	What if the water level gets to be a few feet deep
Answer:	It has screws that you take out, then you put your wire in and then tighten down, and that will lock wire in, it's real easy
Question:	Why do they void the warranty when it’s suppose to be removing water from. Cover
Answer:	No, these are distribution blocks. Typically you will run from the battery to the block with a fuse inline.

Product description

The pump’s versatile design makes it the perfect solution to remove water from basements, garages, stairwells, utility rooms, backyards, sumps and for other utility applications. It features an improved unibody housing that is corrosion proof and reduces potential leak paths. The pump features a powerful 1800 GPH motor that only consumes 100 watts, while delivering up to 1800 gallons per hour. Available in non-automatic & automatic versions utilizing standard 110 volt AC current.

• A genuine Rule product, don't settle for anything less
• Designed to remove water from basements, garages, stairwells, utility rooms, and other utility applications, compact, efficient, long-life motor
• Totally submersible, silent and vibration free operation, rust and corrosion proof, snap-off strainer for easy cleaning
• Heavy-duty thermoplastic housing protects pump from the most adverse conditions
• Using this pump as a pool cover pump voids the warranty, it should not be used to prevent water from accumulating on top of a pool cover

User questions & answers

Question:	My cabin is right next to this sump pump. Is there any way to install a float switch instead so I can sleep or do I have to purchase something else
Answer:	Over 200 amps @ 12 volts
Question:	Are these available with a longer cord
Answer:	Yes it is!
Question:	At what level does the pump come on
Answer:	Yesyou can. You will need a fuse for each amp.
Question:	I assume its rated for salt water? can it run for 10 hours at a time? 24 hours? as long as its submerged obviously dry will burn it out. thanks
Answer:	That is a splitter you use 4 gauge in and a smaller wire going out. Be sure to use a fuse as close to the source as possible. Good luck

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91250 1/4 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

• ★Smart control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.）
• ★With bottom suction trainer,100% submersible.
• ★Maximum flow rate: 660GPH STRONG POWER and HIGH LIFT. Max Lift Height: 8.2 ft. 40W high efficiency motor for energy saving.
• ★Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.
• ★Backed by 12 month warranty and professional after-sale service within 24hrs.

User questions & answers

Question:	Can you use this pump while simming in pool or pond
Answer:	I don't know the measures, but fits in a small microwave
Question:	How loud would this be inside
Answer:	Yes the tommie tippie 5 and 8 oz bottles fit
Question:	What size is the barbed fitting
Answer:	I do
Question:	can this be used to pump out a 2000 gallon garden pond for water change
Answer:	Hello, the product belongs to the junction box, which separates the main line. It is used for car audio decoration and has no insurance function.

Product features

FREESEA 660 GPH Water Pump

1.Ultra Quiet: Water pump sound less than 20 db ,almost hard to feel.

2.Dry burning-resistant protection function: Smart control, dry running automaticly cut power.

3.High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance.

Specification

Max Flow Rate: 660 GPH

H-Max (Lift height): 5.9 FT

Power: 40 Watt

Voltage: 110 - 120 V / 60Hz

Length of power cord: 5.9 FT

Energy saving

40 Watt Low power motor.

Seamless movement Hydrodynamic design(Helps reduce power consumption).

4*Nozzle

1*1/2-inch

1*2/3-inch

1*4/5-inch

1*1-inch

Durable Copper wire motor

Duable Copper wire motor

Effectively improve service life and reduce motor failure.

Product description

1/55 hip submersible battery powered utility pump with 4. 5 volt dc brush motor; 4350 RPM, 3. 0 amps

• Ideal for transferring water from one source to another
• Great for emergencies like draining water from stopped up sinks, toilets and appliances
• Garden hose inlet connection and includes 42 inch hose with adapter
• Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information
• Click on the Water Ace products link at the top of this page to see more pump options from Water Ace products

User questions & answers

Question:	Can anybody tell me approximate gph and approximate lift height maximum
Answer:	No but I can tell you they are a one time use pump. It won’t work after the 1st time
Question:	How fast does it pump
Answer:	It is a small unit and it pumped at a steady pace took 6 hours to pump out the bottom of our pool, The batteries will last for 4 hours till it gets sluggish. I replaced the batteries and it worked like a champ.
Question:	What is the water volume per minute at 6 ft height (or at any other benchmarked height
Answer:	the batteries only lasted 2 hours and had to be changed out, dont know the volume of water, I used it to pump out the bottom of the pool. took a long time.
Question:	Will this pump work with a simple rotating sprinkler? Would there be enough pressure
Answer:	It might work once but then it will break. I’ve got 2 of them and my partner got one and they worked great the 1st time but all 3 never worked again. Rotating sprinkler? Can’t even think of using this with that application.

Product features

Full Line of Dependable Water Pumps

WaterAce produces quality water pumps for all of your residential needs. From sump pumps for flooded basements to deep well water pumps and everything in between, WaterAce has you covered. Click on the WaterAce link at the top of this page to shop our Amazon Brand Store.

Product description

Product Details



Green expert 1/6 HP submersible utility pump is adapted to connect with 3/4" standard garden hose, can completely submersed in 16 feet depth Flooded Basement or Puddle of Accumulated Water for water drainage.

It also features a maximum pumping capacity of 1056 GPH for dependable efficiency and can lift water to 16.5 feet height with dependable efficiency.

1.5 amps full load motor with thermal protector for safety use.

The lengthened 25-feet power cable allows you to connect to the power conveniently.

This item is designed for common 115V, 60Hz.



Application Occasions



Ideal for draining clean or slightly dirty water from any enclosing environment, such as cellars, reservoirs, pool covers, flooded basements, flat roofs and more, but not for applications involving salt water or brine.

This utility pump with a suction screen at the bottom can whisk away water to 1/5 inch from the floor and allows to pass 1/5 inch grains.



Specification



Output power: 1/6 HP

Max height: 16.4 feet

Max Flow: 1056 GPH

Max. submersible depth: 16 feet

Max grain size: 1/5 inch

Length of cable: 25 feet



Package includes



1 x Submersible sump pump

2 x hose adapter

1 x detailed manual



Warranty



We provide a 1-year limited warranty for this item from date of purchase. Please read instruction manual carefully before operation.



How to get help by three easy steps



Step one: Find the order of this item by checking “Your Order” in your account;

Step two: Click “Get Help With Order”, select “other issue”;

Step three: Please write down all your concerns, we’ll response within 1 working day.

• ☘【Efficient Utility Pump】- High Performance PSC motor with pure copper wire produces 1/6HP output power, it ensures the stronger power conversion but lower power consumption, more energy-saving than others. This item has the ability to lift water up to Max. 16.5ft of vertical height. Max. Flow rate is 1056 gallons per hour at zero feet, 600 gallons per hour at 10 ft of discharge lift.
• ☘【Small and Lightweight, Easy to Carry&Install】- This item requires a very small install space, can perfectly put in Min. 6.5*6.5 pit. Item weight: 7.05lb. The 25 feet long grounded waterproof cord with portable handle allows convenient installation from farther position, no more trouble for dealing with extension cords! Discharge Fittings: 2 *plastic adapters, 1” for high capacity pumping and 3/4” for connecting to standard garden hoses.
• ☘【Simple Plug-in Operation】- The pump will be directly running when power on, can remove water level down to 0.2”. Designed for quick water draining in flooded area, water tanks, swimming pools, basement, hot tub spa or garden pond etc. You can use it with our garden hose nozzle for car wash, Plants watering, pets shower as well.
• ☘【Green and Tough Design, Running Quiet】- Environmental and ergonomics appearance can comfortably fit in your house and garden. Full corrosion-resistant and reinforced thermoplastic construction with thermal overload protection for continuous duty use in water removal application.
• ☘【Safety Ensure and Customer First】- Passed by UL certification with 100% manufacturer tested. For any question, please don't hesitate to write to us through our storefront and click "ask a question", or support email to us, we will respond within 24 hours.

User questions & answers

Question:	Does this pump safely bypass when the outlet is blocked or does this damage the pump
Answer:	We use this pump to drain a mid-size vinyl swimming pool which is itself set on a hard base. Initially, the vinyl a the base of the pool was sucked up against the impeller grid at the base of the pump and the pump continued to run with no apparent damage. On the outlet side we have run the pump when an output garden hose was kinked. The pump continued to run with a small volume exiting the hose. Again, no apparent damage but I note that we have never had the outlet completely blocked. The pump is fairly new to us and we have only used it a few times but are impressed thus far.
Question:	how heavy is it? Will my glass aquarium support it? Thanks
Answer:	The item 203622 itself is 11.5lb including 25ft cord, and I afraid the flow is too strong to a glass aquaium. May I recommend a manual pump to you? Our item 203617 you can find it in the same listing might be more suitable for a aquarium and it's only 7lb weight including 25ft cord.
Question:	Is this an oil free pump
Answer:	Yes
Question:	My pump quit running. How do I send in for the warranty
Answer:	you have to return it to the retail outlet where it was purchased. wont accept if within 30 days after warranty. check your orders may tell you who sold it. hope this helps make sure the pumpn isn't locked up with something in the pickup

Product description

Dimensions 7.84" x 5" x 4.62" - Can Run Dry - Self Priming - Built in Check Valve

• 4 Year Warranty from Authorized Seaflo USA Dealer!!!
• 3.3 Gallons Per Minute flow, 45 psi Self Priming
• Includes standard three prong outlet plug
• 1/2" Threaded NPT Inlet/Outlet - includes 1/2" Barbed Hose Adapters - Mesh Inlet Strainer
• 110V AC Current Draw .75 amps (1.2 Max Amps)

User questions & answers

Question:	can i use this as a in-line pump for a fountain ? i have been trying to find a in-line pump non-submersible pump to pump water with 4 foot lift
Answer:	no, you need to search fountain pump. This one is for something like a camper sink and faucet.
Question:	I need to pump water from a 500 gallon tank into and ecotemp water heater and then into 2 sinks, 1 shower will this work
Answer:	What is the pressure required by your tankless water heater? It will probably work perfectly.
Question:	Can this pump pressurize (on demand) water from a water tote for a small cabin (sink & shower
Answer:	Yes, that is what we use our pump for.
Question:	My pump says 12 volt dc so i hooked to 12 volt, it surges and very little water is pumped, this is for sink only, where is my problem
Answer:	Make sure your hose is non-collapsible, especially on the intake. Mine did that because the cheap hose would kink and suck closed.

Product description

The Utility Transfer Pump from SumpMarine is a 1/10th HP multi purpose transfer pump capable of transferring up to 330 Gallons per hour. This lightweight, portable utility pump is perfect for household applications and/or emergency use. Compact and easy to store, a SumpMarine Utility Transfer Pump is the perfect solution for household and light commercial use. Specifications: - Light weight, Portable Pump with metal hose connectors to a standard garden hose - Powerful 1/10th HP Motor - Capable of transferring up to 330 Gallons per Hour - Self Priming and removes water down to 1/8-inch of surface when water suction attachment is connected Included in this Package: - 1/10th HP Pump operating with standard 115V power from a wall socket - 6 foot garden hose with water suction attachment - Complete impeller replacement kit Applications: - Ideal for everyday household water transfer requirements - Perfect for water distribution such as watering lawns or gardens - Great for draining waterbeds, clogged sinks, and aquariums. This item is flammable if not used as instructed. This item may internally explode if not used as instructed.

• Heavy Duty 1/10th HP Pump operating at 115V from a wall socket with up to 330GPH pumping capacity
• Made of durable material with Metal hose connectors for higher reliability than plastic threads
• Light weight and portable. Fill pump with water, connect hoses, plug in and you're ready to go
• Perfect for household and utility applications of transferring water from one place to another
• Includes 6' hose and Water Suction attachment as well as an impeller replacement kit

User questions & answers

Question:	how much pressure does this have. I have a on demand water heater that need 20# of pressure, will this work
Answer:	This won't work. This pump probably has only 10 psi at best. I used this with a water hose to transfer a 60 gallon pond of water, it took 45 minutes to do so. Buy a bigger pump. It's nice if you only have a low demand like I did. Plus this pumps shuts off automatically every 7-10 minutes of use.
Question:	How long is the power cord
Answer:	About 4 feet.
Question:	Where can you get repair parts
Answer:	This did come with impeller replacement kit in the box. Anything other than that, I am not sure. We haven't had ours long enough to need parts.
Question:	Can I leave this pump outside during warmer weather
Answer:	I would think so but only if its protected it from the weather. The motor body has vents at the end where a cooling fan spins and if water gets in there...I dont know. Also, if it gets too hot it will shut down until it cools. Its not a sump pump, and its great for emptying say a 50 gal reservoir in 10-15 minutes but its not heavy duty.

• ⛵Voltage: 12V DC; Flow capacity: 750 Gallons per hour (2850 Liters per hour) - 47. 5 Liters per minute
• ⛵Maximum delivery head: 3. 8 meters (height of vertical water flow up pipe); Current draw: 3 Amp
• ⛵Hose Outlet: 19mm (3/4"); Dimensions: Length 145mm (5. 71") x Width 83mm (3. 27") x 103mm (4. 05")
• ⛵Ignition protected; 3-wire lead, approx. 1m long; Model: SFBP1-G750-06
• ⛵Tough plastic body automatic bilge pump with built-in float switch. (No separate float switch is needed)

User questions & answers

Question:	What is the warranty on this unit
Answer:	This is a terrible product! In the 4 years I have owned the boat that came with this switch, I have had to replace same 3 times. I would replace same along with the component but it is in a very difficult spot. In you are in the same situation, buy two switches because the first one will go out after awhile and then you have a spare. Good luck.
Question:	so manual mentions the strainer base as well as a filter, but my pump has no filter. Is it just the strainer
Answer:	It's a 2 pole switch with a circuit breaker and a couple of lights. Power comes in to the middle lug of the switch, one side goes directly to the pump, the other side goes through the float switch for the "Auto" side.
Question:	what is the warranty on this model
Answer:	3.5 inches x 2 x 2 deep .......
Question:	How does it mount in the boat does it have a bracelet
Answer:	I used this site to get me going on the installation. Hope it helps you.https://www.boatus.com/boattech/casey/installing-bilge-pump.asp

Product description

1/2 hp manual submersible utility pump with 10' power cord and water cooled motor; requires monitoring to turn pump on/off; will drain from flat surfaces to 3/8 inch and handles solids up to 1/8 inch diameter; up to 3180 gph. Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information. Utility pumps are used to transfer water from one source to another or to drain water from surfaces. These pumps are typically used for draining water from sinks or tubs with clogged drains, emptying Pools or spas, draining excess water on flooded basement floors, etc. Utility pumps are either portable or submersible. Portable means they are designed to operate outside the water with a hose placed in the water. Submersible means they are designed to be submersed in water. Submersible pumps can be provided with no on/off switch, which means they are manually operated or have a 'smart' switch that will detect the absence of water and will therefore shut off the pump automatically. Since most utility pumps are made of plastic and rubber components, running them dry (running them without water circulating in them), will result in the pump overheating and melting the plastic and rubber components. As a result it is required that you physically monitor pumps provided without switches so you can unplug them when the task is complete. WaterAce products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The WaterAce commitment is to produce pumps for the long term at the best value. Click on the WaterAce products link at the top of this page to see more pump options from WaterAce products.

• Designed for numerous residential uses including flooded basements, window wells, spas, cisterns, sumps, and flooding in low lying areas
• Continuous duty, efficient 115V PSC (permanent split capacitor) motor for lower Carbon footprint; higher efficiency using less energy to operate
• Made of corrosion resistant thermoplastic for long life
• Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information
• Click on the WaterAce products link at the top of this page to see more pump options from WaterAce products

User questions & answers

Question:	Can i pump from lake into yard about 200ft and maybe 10-15ft height
Answer:	Hello, Thanks for the question. The black fabric is NOT see through. We hope this helps.
Question:	What size is the male thread on thr pump that is attached to the hose adapter? 1" or 1.25" MPT
Answer:	I would suggest going only one size down! Good luck with your training!
Question:	Will this drain through a garden hose or does it need a specific one/type
Answer:	Since it'll stretch in the water, I'd go with sizing down to a medium. I'm 180 and I had to size down from an XL to a L. Great suit though. Good luck!
Question:	does this pump contain oil? Is it safe for koi ponds
Answer:	Probably. It will last longer if you don't wear it in the pool.

Product features

Full Line of Dependable Water Pumps

WaterAce produces quality water pumps for all of your residential needs. From sump pumps for flooded basements to deep well water pumps and everything in between, WaterAce has you covered. Click on the WaterAce link at the top of this page to shop our Amazon Brand Store.